mirror of
https://github.com/facebook/rocksdb.git
synced 2024-12-03 14:52:53 +00:00
60 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Peter Dillinger
|
b1b6f87fbe |
Some small improvements to HyperClockCache (#11601)
Summary: Stacked on https://github.com/facebook/rocksdb/issues/11572 * Minimize use of std::function and lambdas to minimize chances of compiler heap-allocating closures (unnecessary stress on allocator). It appears that converting FindSlot to a template enables inlining the lambda parameters, avoiding heap allocations. * Clean up some logic with FindSlot (FIXMEs from https://github.com/facebook/rocksdb/issues/11572) * Fix handling of rare case of probing all slots, with new unit test. (Previously Insert would not roll back displacements in that case, which would kill performance if it were to happen.) * Add an -early_exit option to cache_bench for gathering memory stats before deallocation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11601 Test Plan: unit test added for probing all slots ## Seeing heap allocations Run `MALLOC_CONF="stats_print:true" ./cache_bench -cache_type=hyper_clock_cache` before https://github.com/facebook/rocksdb/issues/11572 vs. after this change. Before, we see this in the interesting bin statistics: ``` size nrequests ---- --------- 32 578460 64 24340 8192 578460 ``` And after: ``` size nrequests ---- --------- 32 (insignificant) 64 24370 8192 579130 ``` ## Performance test Build with `make USE_CLANG=1 PORTABLE=0 DEBUG_LEVEL=0 -j32 cache_bench` Run `./cache_bench -cache_type=hyper_clock_cache -ops_per_thread=5000000` in before and after configurations, simultaneously: ``` Before: Complete in 33.244 s; Rough parallel ops/sec = 2406442 After: Complete in 32.773 s; Rough parallel ops/sec = 2441019 ``` Reviewed By: jowlyzhang Differential Revision: D47375092 Pulled By: pdillinger fbshipit-source-id: 46f0f57257ddb374290a0a38c651764ea60ba410 |
||
|
Peter Dillinger
|
f4a02f2c52 |
Add hash_seed to Caches (#11391)
Summary: See motivation and description in new ShardedCacheOptions::hash_seed option. Updated db_bench so that its seed param is used for the cache hash seed. Made its code more safe to ensure seed is set before use. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11391 Test Plan: unit tests added / updated **Performance** - no discernible difference seen running cache_bench repeatedly before & after. With lru_cache and hyper_clock_cache. Reviewed By: hx235 Differential Revision: D45557797 Pulled By: pdillinger fbshipit-source-id: 40bf4da6d66f9d41a8a0eb8e5cf4246a4aa07934 |
||
|
Peter Dillinger
|
204fcff751 |
HyperClockCache support for SecondaryCache, with refactoring (#11301)
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
|
||
|
Peter Dillinger
|
ccaa3225b0 |
Simplify tracking entries already in SecondaryCache (#11299)
Summary: In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic. This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code. gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper. Also refactored some related test code to share common code / functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299 Test Plan: existing tests Reviewed By: anand1976 Differential Revision: D44101453 Pulled By: pdillinger fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345 |
||
|
Peter Dillinger
|
601efe3cf2 |
Misc cleanup of block cache code (#11291)
Summary: ... ahead of a larger change. * Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache` * Unify naming of "standalone" block cache entries (was "detached" in clock_cache) * Remove some unused definitions in clock_cache.h (leftover from a previous revision) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291 Test Plan: usual tests and CI, no behavior changes Reviewed By: anand1976 Differential Revision: D43984642 Pulled By: pdillinger fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97 |
||
|
Peter Dillinger
|
2a23bee963 |
Use CacheWrapper in more places (#11295)
Summary: ... to simplify code and make it less prone to needless updates on refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11295 Test Plan: existing tests (no functional changes intended) Reviewed By: hx235 Differential Revision: D44040260 Pulled By: pdillinger fbshipit-source-id: 1b6badb5c8ca673db0903bfaba3cfbc986f386be |
||
|
anand76
|
cf09917c18 |
Add filter/index/data secondary cache hits stats (#11246)
Summary: Add more stats for better visibility into the usefulness of the secondary cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11246 Test Plan: Add a new unit test Reviewed By: akankshamahajan15 Differential Revision: D43521364 Pulled By: anand1976 fbshipit-source-id: a92f04884e738a9bf40ad4047acaaaea343838a7 |
||
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
||
|
sdong
|
2800aa069a |
Remove compressed block cache (#11117)
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d |
||
|
Peter Dillinger
|
9f7801c5f1 |
Major Cache refactoring, CPU efficiency improvement (#10975)
Summary: This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache). The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below. * static_cast lines of code +29 -35 (net removed 6) * reinterpret_cast lines of code +6 -32 (net removed 26) ## cache.h and secondary_cache.h * Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications: * Simpler for implementations to deal with just one Insert and one Lookup. * Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters * Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428. * Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks). * It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below). * I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc. * Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation. * Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.) * Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.) * Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774) * Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object. * Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change. ## typed_cache.h Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae). The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used. * PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value. * BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter. * FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue. * For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`. These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.) Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it. ## block_cache.h This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table. ## block_based_table_reader.cc Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation. The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions. ## block_based_table_builder.cc, cache_dump_load_impl.cc Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.) ## Everything else Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975 Test Plan: tests updated Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache): 34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844 34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594 34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297 34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523 34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602 34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293 34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926 34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488 233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984 233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922 233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559 233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93 233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418 233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273 233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691 233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82 1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55 1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02 1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45 1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24 1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92 1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78 1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36 1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83 Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn. Reviewed By: anand1976 Differential Revision: D42417818 Pulled By: pdillinger fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432 |
||
|
Peter Dillinger
|
e079d562af |
Add a SecondaryCache::InsertSaved() API, use in CacheDumper impl (#10945)
Summary: Can simplify some ugly code in cache_dump_load_impl.cc by having an API in SecondaryCache that can directly consume persisted data. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10945 Test Plan: existing tests for CacheDumper, added basic unit test Reviewed By: anand1976 Differential Revision: D41231497 Pulled By: pdillinger fbshipit-source-id: b8ec993ef7d3e7efd68aae8602fd3f858da58068 |
||
|
Peter Dillinger
|
32520df1d9 |
Remove prototype FastLRUCache (#10954)
Summary: This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954 Test Plan: tests updated Reviewed By: akankshamahajan15 Differential Revision: D41310123 Pulled By: pdillinger fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c |
||
|
Peter Dillinger
|
f321e8fc98 |
Don't attempt to use SecondaryCache on block_cache_compressed (#10944)
Summary: Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom! This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed. Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache. This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944 Test Plan: test added that fails on base revision (at least with ASAN) Reviewed By: akankshamahajan15 Differential Revision: D41205578 Pulled By: pdillinger fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f |
||
|
Peter Dillinger
|
cc8c8f6958 |
Refactor (Hyper)ClockCache code (#10887)
Summary: For clean-up and in preparation for some other anticipated changes, including * A new dynamically-scaling variant of HyperClockCache * SecondaryCache support for HyperClockCache This change does some refactoring for current and future code sharing and reusability. (Including follow-up on https://github.com/facebook/rocksdb/issues/10843) ## clock_cache.h * TBD whether new variant will be a HyperClockCache or use some other name, so namespace is just clock_cache for the family of structures. * A number of helper functions introduced and used. * Pre-emptively split ClockHandle (shared among lock-free clock cache variants) and HandleImpl (specific to a kind of Table), and introduce template to plug new Table implementation into ClockCacheShard. ## clock_cache.cc * Mostly using helper functions. Some things like `Rollback()` and `FreeDataMarkEmpty()` were not combined because `Rollback()` is Table-specific while `FreeDataMarkEmpty()` can be used with different table implementations. * Performance testing indicated that despite more opportunities for parallelism, making a local copy of handle data for processing after marking an entry empty was slower than doing that processing before marking the entry empty (but after marking it "under construction"), thus avoiding a few words of copying data. At least for now, this answers the "TODO? Delay freeing?" questions (no). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10887 Test Plan: fixed a unit testing gap; other minor test updates for refactoring No functionality change ## Performance Same setup as https://github.com/facebook/rocksdb/issues/10801: Before: `readrandom [AVG 81 runs] : 627992 (± 5124) ops/sec` After: `readrandom [AVG 81 runs] : 637512 (± 4866) ops/sec` I've been getting some inconsistent results on restarts like the system is not being fair to the two processes, so I'm not sure there's such a real difference. Reviewed By: anand1976 Differential Revision: D40959240 Pulled By: pdillinger fbshipit-source-id: 0a8f3646b3bdb5bc7aaad60b26790b0779189949 |
||
|
Peter Dillinger
|
7555243bcf |
Refactor ShardedCache for more sharing, static polymorphism (#10801)
Summary: The motivations for this change include * Free up space in ClockHandle so that we can add data for secondary cache handling while still keeping within single cache line (64 byte) size. * This change frees up space by eliminating the need for the `hash` field by making the fixed-size key itself a hash, using a 128-bit bijective (lossless) hash. * Generally more customizability of ShardedCache (such as hashing) without worrying about virtual call overheads * ShardedCache now uses static polymorphism (template) instead of dynamic polymorphism (virtual overrides) for the CacheShard. No obvious performance benefit is seen from the change (as mostly expected; most calls to virtual functions in CacheShard could already be optimized to static calls), but offers more flexibility without incurring the runtime cost of adhering to a common interface (without type parameters or static callbacks). * You'll also notice less `reinterpret_cast`ing and other boilerplate in the Cache implementations, as this can go in ShardedCache. More detail: * Don't have LRUCacheShard maintain `std::shared_ptr<SecondaryCache>` copies (extra refcount) when LRUCache can be in charge of keeping a `shared_ptr`. * Renamed `capacity_mutex_` to `config_mutex_` to better represent the scope of what it guards. * Some preparation for 64-bit hash and indexing in LRUCache, but didn't include the full change because of slight performance regression. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10801 Test Plan: Unit test updates were non-trivial because of major changes to the ClockCacheShard interface in handling of key vs. hash. Performance: Create with `TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16` Test with ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X1000] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=610000000 -duration 20 -threads=16 ``` Before: `readrandom [AVG 150 runs] : 321147 (± 253) ops/sec` After: `readrandom [AVG 150 runs] : 321530 (± 326) ops/sec` So possibly ~0.1% improvement. And with `-cache_type=hyper_clock_cache`: Before: `readrandom [AVG 30 runs] : 614126 (± 7978) ops/sec` After: `readrandom [AVG 30 runs] : 645349 (± 8087) ops/sec` So roughly 5% improvement! Reviewed By: anand1976 Differential Revision: D40252236 Pulled By: pdillinger fbshipit-source-id: ff8fc70ef569585edc95bcbaaa0386f61355ae5b |
||
|
Peter Dillinger
|
e466173d5c |
Print stack traces on frozen tests in CI (#10828)
Summary: Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off. For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828 Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI Reviewed By: hx235 Differential Revision: D40447634 Pulled By: pdillinger fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1 |
||
|
Peter Dillinger
|
0f91c72adc |
Call experimental new clock cache HyperClockCache (#10684)
Summary: This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons: * We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache." * We want to highlight the key feature: it's fast (especially under parallel load) * Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements. * We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.) Some API detail: * To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`. * Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated. For performance tests see https://github.com/facebook/rocksdb/pull/10626 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684 Test Plan: no interesting functional changes; tests updated Reviewed By: anand1976 Differential Revision: D39547800 Pulled By: pdillinger fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf |
||
|
Peter Dillinger
|
5724348689 |
Revamp, optimize new experimental clock cache (#10626)
Summary:
* Consolidates most metadata into a single word per slot so that more
can be accomplished with a single atomic update. In the common case,
Lookup was previously about 4 atomic updates, now just 1 atomic update.
Common case Release was previously 1 atomic read + 1 atomic update,
now just 1 atomic update.
* Eliminate spins / waits / yields, which likely threaten some "lock free"
benefits. Compare-exchange loops are only used in explicit Erase, and
strict_capacity_limit=true Insert. Eviction uses opportunistic compare-
exchange.
* Relaxes some aggressiveness and guarantees. For example,
* Duplicate Inserts will sometimes go undetected and the shadow duplicate
will age out with eviction.
* In many cases, the older Inserted value for a given cache key will be kept
(i.e. Insert does not support overwrite).
* Entries explicitly erased (rather than evicted) might not be freed
immediately in some rare cases.
* With strict_capacity_limit=false, capacity limit is not tracked/enforced as
precisely as LRUCache, but is self-correcting and should only deviate by a
very small number of extra or fewer entries.
* Use smaller "computed default" number of cache shards in many cases,
because benefits to larger usage tracking / eviction pools outweigh the small
cost of more lock-free atomic contention. The improvement in CPU and I/O
is dramatic in some limit-memory cases.
* Even without the sharding change, the eviction algorithm is likely more
effective than LRU overall because it's more stateful, even though the
"hot path" state tracking for it is essentially free with ref counting. It
is like a generalized CLOCK with aging (see code comments). I don't have
performance numbers showing a specific improvement, but in theory, for a
Poisson access pattern to each block, keeping some state allows better
estimation of time to next access (Poisson interval) than strict LRU. The
bounded randomness in CLOCK can also reduce "cliff" effect for repeated
range scans approaching and exceeding cache size.
## Hot path algorithm comparison
Rough descriptions, focusing on number and kind of atomic operations:
* Old `Lookup()` (2-5 atomic updates per probe):
```
Loop:
Increment internal ref count at slot
If possible hit:
Check flags atomic (and non-atomic fields)
If cache hit:
Three distinct updates to 'flags' atomic
Increment refs for internal-to-external
Return
Decrement internal ref count
while atomic read 'displacements' > 0
```
* New `Lookup()` (1-2 atomic updates per probe):
```
Loop:
Increment acquire counter in meta word (optimistic)
If visible entry (already read meta word):
If match (read non-atomic fields):
Return
Else:
Decrement acquire counter in meta word
Else if invisible entry (rare, already read meta word):
Decrement acquire counter in meta word
while atomic read 'displacements' > 0
```
* Old `Release()` (1 atomic update, conditional on atomic read, rarely more):
```
Read atomic ref count
If last reference and invisible (rare):
Use CAS etc. to remove
Return
Else:
Decrement ref count
```
* New `Release()` (1 unconditional atomic update, rarely more):
```
Increment release counter in meta word
If last reference and invisible (rare):
Use CAS etc. to remove
Return
```
## Performance test setup
Build DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=${CACHE_MB}000000 -duration 60 -threads=$THREADS -statistics
```
Numbers on a single socket Skylake Xeon system with 48 hardware threads, DEBUG_LEVEL=0 PORTABLE=0. Very similar story on a dual socket system with 80 hardware threads. Using (every 2nd) Fibonacci MB cache sizes to sample the territory between powers of two. Configurations:
base: LRUCache before this change, but with db_bench change to default cache_numshardbits=-1 (instead of fixed at 6)
folly: LRUCache before this change, with folly enabled (distributed mutex) but on an old compiler (sorry)
gt_clock: experimental ClockCache before this change
new_clock: experimental ClockCache with this change
## Performance test results
First test "hot path" read performance, with block cache large enough for whole DB:
4181MB 1thread base -> kops/s: 47.761
4181MB 1thread folly -> kops/s: 45.877
4181MB 1thread gt_clock -> kops/s: 51.092
4181MB 1thread new_clock -> kops/s: 53.944
4181MB 16thread base -> kops/s: 284.567
4181MB 16thread folly -> kops/s: 249.015
4181MB 16thread gt_clock -> kops/s: 743.762
4181MB 16thread new_clock -> kops/s: 861.821
4181MB 24thread base -> kops/s: 303.415
4181MB 24thread folly -> kops/s: 266.548
4181MB 24thread gt_clock -> kops/s: 975.706
4181MB 24thread new_clock -> kops/s: 1205.64 (~= 24 * 53.944)
4181MB 32thread base -> kops/s: 311.251
4181MB 32thread folly -> kops/s: 274.952
4181MB 32thread gt_clock -> kops/s: 1045.98
4181MB 32thread new_clock -> kops/s: 1370.38
4181MB 48thread base -> kops/s: 310.504
4181MB 48thread folly -> kops/s: 268.322
4181MB 48thread gt_clock -> kops/s: 1195.65
4181MB 48thread new_clock -> kops/s: 1604.85 (~= 24 * 1.25 * 53.944)
4181MB 64thread base -> kops/s: 307.839
4181MB 64thread folly -> kops/s: 272.172
4181MB 64thread gt_clock -> kops/s: 1204.47
4181MB 64thread new_clock -> kops/s: 1615.37
4181MB 128thread base -> kops/s: 310.934
4181MB 128thread folly -> kops/s: 267.468
4181MB 128thread gt_clock -> kops/s: 1188.75
4181MB 128thread new_clock -> kops/s: 1595.46
Whether we have just one thread on a quiet system or an overload of threads, the new version wins every time in thousand-ops per second, sometimes dramatically so. Mutex-based implementation quickly becomes contention-limited. New clock cache shows essentially perfect scaling up to number of physical cores (24), and then each hyperthreaded core adding about 1/4 the throughput of an additional physical core (see 48 thread case). Block cache miss rates (omitted above) are negligible across the board. With partitioned instead of full filters, the maximum speed-up vs. base is more like 2.5x rather than 5x.
Now test a large block cache with low miss ratio, but some eviction is required:
1597MB 1thread base -> kops/s: 46.603 io_bytes/op: 1584.63 miss_ratio: 0.0201066 max_rss_mb: 1589.23
1597MB 1thread folly -> kops/s: 45.079 io_bytes/op: 1530.03 miss_ratio: 0.019872 max_rss_mb: 1550.43
1597MB 1thread gt_clock -> kops/s: 48.711 io_bytes/op: 1566.63 miss_ratio: 0.0198923 max_rss_mb: 1691.4
1597MB 1thread new_clock -> kops/s: 51.531 io_bytes/op: 1589.07 miss_ratio: 0.0201969 max_rss_mb: 1583.56
1597MB 32thread base -> kops/s: 301.174 io_bytes/op: 1439.52 miss_ratio: 0.0184218 max_rss_mb: 1656.59
1597MB 32thread folly -> kops/s: 273.09 io_bytes/op: 1375.12 miss_ratio: 0.0180002 max_rss_mb: 1586.8
1597MB 32thread gt_clock -> kops/s: 904.497 io_bytes/op: 1411.29 miss_ratio: 0.0179934 max_rss_mb: 1775.89
1597MB 32thread new_clock -> kops/s: 1182.59 io_bytes/op: 1440.77 miss_ratio: 0.0185449 max_rss_mb: 1636.45
1597MB 128thread base -> kops/s: 309.91 io_bytes/op: 1438.25 miss_ratio: 0.018399 max_rss_mb: 1689.98
1597MB 128thread folly -> kops/s: 267.605 io_bytes/op: 1394.16 miss_ratio: 0.0180286 max_rss_mb: 1631.91
1597MB 128thread gt_clock -> kops/s: 691.518 io_bytes/op: 9056.73 miss_ratio: 0.0186572 max_rss_mb: 1982.26
1597MB 128thread new_clock -> kops/s: 1406.12 io_bytes/op: 1440.82 miss_ratio: 0.0185463 max_rss_mb: 1685.63
610MB 1thread base -> kops/s: 45.511 io_bytes/op: 2279.61 miss_ratio: 0.0290528 max_rss_mb: 615.137
610MB 1thread folly -> kops/s: 43.386 io_bytes/op: 2217.29 miss_ratio: 0.0289282 max_rss_mb: 600.996
610MB 1thread gt_clock -> kops/s: 46.207 io_bytes/op: 2275.51 miss_ratio: 0.0290057 max_rss_mb: 637.934
610MB 1thread new_clock -> kops/s: 48.879 io_bytes/op: 2283.1 miss_ratio: 0.0291253 max_rss_mb: 613.5
610MB 32thread base -> kops/s: 306.59 io_bytes/op: 2250 miss_ratio: 0.0288721 max_rss_mb: 683.402
610MB 32thread folly -> kops/s: 269.176 io_bytes/op: 2187.86 miss_ratio: 0.0286938 max_rss_mb: 628.742
610MB 32thread gt_clock -> kops/s: 855.097 io_bytes/op: 2279.26 miss_ratio: 0.0288009 max_rss_mb: 733.062
610MB 32thread new_clock -> kops/s: 1121.47 io_bytes/op: 2244.29 miss_ratio: 0.0289046 max_rss_mb: 666.453
610MB 128thread base -> kops/s: 305.079 io_bytes/op: 2252.43 miss_ratio: 0.0288884 max_rss_mb: 723.457
610MB 128thread folly -> kops/s: 269.583 io_bytes/op: 2204.58 miss_ratio: 0.0287001 max_rss_mb: 676.426
610MB 128thread gt_clock -> kops/s: 53.298 io_bytes/op: 8128.98 miss_ratio: 0.0292452 max_rss_mb: 956.273
610MB 128thread new_clock -> kops/s: 1301.09 io_bytes/op: 2246.04 miss_ratio: 0.0289171 max_rss_mb: 788.812
The new version is still winning every time, sometimes dramatically so, and we can tell from the maximum resident memory numbers (which contain some noise, by the way) that the new cache is not cheating on memory usage. IMPORTANT: The previous generation experimental clock cache appears to hit a serious bottleneck in the higher thread count configurations, presumably due to some of its waiting functionality. (The same bottleneck is not seen with partitioned index+filters.)
Now we consider even smaller cache sizes, with higher miss ratios, eviction work, etc.
233MB 1thread base -> kops/s: 10.557 io_bytes/op: 227040 miss_ratio: 0.0403105 max_rss_mb: 247.371
233MB 1thread folly -> kops/s: 15.348 io_bytes/op: 112007 miss_ratio: 0.0372238 max_rss_mb: 245.293
233MB 1thread gt_clock -> kops/s: 6.365 io_bytes/op: 244854 miss_ratio: 0.0413873 max_rss_mb: 259.844
233MB 1thread new_clock -> kops/s: 47.501 io_bytes/op: 2591.93 miss_ratio: 0.0330989 max_rss_mb: 242.461
233MB 32thread base -> kops/s: 96.498 io_bytes/op: 363379 miss_ratio: 0.0459966 max_rss_mb: 479.227
233MB 32thread folly -> kops/s: 109.95 io_bytes/op: 314799 miss_ratio: 0.0450032 max_rss_mb: 400.738
233MB 32thread gt_clock -> kops/s: 2.353 io_bytes/op: 385397 miss_ratio: 0.048445 max_rss_mb: 500.688
233MB 32thread new_clock -> kops/s: 1088.95 io_bytes/op: 2567.02 miss_ratio: 0.0330593 max_rss_mb: 303.402
233MB 128thread base -> kops/s: 84.302 io_bytes/op: 378020 miss_ratio: 0.0466558 max_rss_mb: 1051.84
233MB 128thread folly -> kops/s: 89.921 io_bytes/op: 338242 miss_ratio: 0.0460309 max_rss_mb: 812.785
233MB 128thread gt_clock -> kops/s: 2.588 io_bytes/op: 462833 miss_ratio: 0.0509158 max_rss_mb: 1109.94
233MB 128thread new_clock -> kops/s: 1299.26 io_bytes/op: 2565.94 miss_ratio: 0.0330531 max_rss_mb: 361.016
89MB 1thread base -> kops/s: 0.574 io_bytes/op: 5.35977e+06 miss_ratio: 0.274427 max_rss_mb: 91.3086
89MB 1thread folly -> kops/s: 0.578 io_bytes/op: 5.16549e+06 miss_ratio: 0.27276 max_rss_mb: 96.8984
89MB 1thread gt_clock -> kops/s: 0.512 io_bytes/op: 4.13111e+06 miss_ratio: 0.242817 max_rss_mb: 119.441
89MB 1thread new_clock -> kops/s: 48.172 io_bytes/op: 2709.76 miss_ratio: 0.0346162 max_rss_mb: 100.754
89MB 32thread base -> kops/s: 5.779 io_bytes/op: 6.14192e+06 miss_ratio: 0.320399 max_rss_mb: 311.812
89MB 32thread folly -> kops/s: 5.601 io_bytes/op: 5.83838e+06 miss_ratio: 0.313123 max_rss_mb: 252.418
89MB 32thread gt_clock -> kops/s: 0.77 io_bytes/op: 3.99236e+06 miss_ratio: 0.236296 max_rss_mb: 396.422
89MB 32thread new_clock -> kops/s: 1064.97 io_bytes/op: 2687.23 miss_ratio: 0.0346134 max_rss_mb: 155.293
89MB 128thread base -> kops/s: 4.959 io_bytes/op: 6.20297e+06 miss_ratio: 0.323945 max_rss_mb: 823.43
89MB 128thread folly -> kops/s: 4.962 io_bytes/op: 5.9601e+06 miss_ratio: 0.319857 max_rss_mb: 626.824
89MB 128thread gt_clock -> kops/s: 1.009 io_bytes/op: 4.1083e+06 miss_ratio: 0.242512 max_rss_mb: 1095.32
89MB 128thread new_clock -> kops/s: 1224.39 io_bytes/op: 2688.2 miss_ratio: 0.0346207 max_rss_mb: 218.223
^ Now something interesting has happened: the new clock cache has gained a dramatic lead in the single-threaded case, and this is because the cache is so small, and full filters are so big, that dividing the cache into 64 shards leads to significant (random) imbalances in cache shards and excessive churn in imbalanced shards. This new clock cache only uses two shards for this configuration, and that helps to ensure that entries are part of a sufficiently big pool that their eviction order resembles the single-shard order. (This effect is not seen with partitioned index+filters.)
Even smaller cache size:
34MB 1thread base -> kops/s: 0.198 io_bytes/op: 1.65342e+07 miss_ratio: 0.939466 max_rss_mb: 48.6914
34MB 1thread folly -> kops/s: 0.201 io_bytes/op: 1.63416e+07 miss_ratio: 0.939081 max_rss_mb: 45.3281
34MB 1thread gt_clock -> kops/s: 0.448 io_bytes/op: 4.43957e+06 miss_ratio: 0.266749 max_rss_mb: 100.523
34MB 1thread new_clock -> kops/s: 1.055 io_bytes/op: 1.85439e+06 miss_ratio: 0.107512 max_rss_mb: 75.3125
34MB 32thread base -> kops/s: 3.346 io_bytes/op: 1.64852e+07 miss_ratio: 0.93596 max_rss_mb: 180.48
34MB 32thread folly -> kops/s: 3.431 io_bytes/op: 1.62857e+07 miss_ratio: 0.935693 max_rss_mb: 137.531
34MB 32thread gt_clock -> kops/s: 1.47 io_bytes/op: 4.89704e+06 miss_ratio: 0.295081 max_rss_mb: 392.465
34MB 32thread new_clock -> kops/s: 8.19 io_bytes/op: 3.70456e+06 miss_ratio: 0.20826 max_rss_mb: 519.793
34MB 128thread base -> kops/s: 2.293 io_bytes/op: 1.64351e+07 miss_ratio: 0.931866 max_rss_mb: 449.484
34MB 128thread folly -> kops/s: 2.34 io_bytes/op: 1.6219e+07 miss_ratio: 0.932023 max_rss_mb: 396.457
34MB 128thread gt_clock -> kops/s: 1.798 io_bytes/op: 5.4241e+06 miss_ratio: 0.324881 max_rss_mb: 1104.41
34MB 128thread new_clock -> kops/s: 10.519 io_bytes/op: 2.39354e+06 miss_ratio: 0.136147 max_rss_mb: 1050.52
As the miss ratio gets higher (say, above 10%), the CPU time spent in eviction starts to erode the advantage of using fewer shards (13% miss rate much lower than 94%). LRU's O(1) eviction time can eventually pay off when there's enough block cache churn:
13MB 1thread base -> kops/s: 0.195 io_bytes/op: 1.65732e+07 miss_ratio: 0.946604 max_rss_mb: 45.6328
13MB 1thread folly -> kops/s: 0.197 io_bytes/op: 1.63793e+07 miss_ratio: 0.94661 max_rss_mb: 33.8633
13MB 1thread gt_clock -> kops/s: 0.519 io_bytes/op: 4.43316e+06 miss_ratio: 0.269379 max_rss_mb: 100.684
13MB 1thread new_clock -> kops/s: 0.176 io_bytes/op: 1.54148e+07 miss_ratio: 0.91545 max_rss_mb: 66.2383
13MB 32thread base -> kops/s: 3.266 io_bytes/op: 1.65544e+07 miss_ratio: 0.943386 max_rss_mb: 132.492
13MB 32thread folly -> kops/s: 3.396 io_bytes/op: 1.63142e+07 miss_ratio: 0.943243 max_rss_mb: 101.863
13MB 32thread gt_clock -> kops/s: 2.758 io_bytes/op: 5.13714e+06 miss_ratio: 0.310652 max_rss_mb: 396.121
13MB 32thread new_clock -> kops/s: 3.11 io_bytes/op: 1.23419e+07 miss_ratio: 0.708425 max_rss_mb: 321.758
13MB 128thread base -> kops/s: 2.31 io_bytes/op: 1.64823e+07 miss_ratio: 0.939543 max_rss_mb: 425.539
13MB 128thread folly -> kops/s: 2.339 io_bytes/op: 1.6242e+07 miss_ratio: 0.939966 max_rss_mb: 346.098
13MB 128thread gt_clock -> kops/s: 3.223 io_bytes/op: 5.76928e+06 miss_ratio: 0.345899 max_rss_mb: 1087.77
13MB 128thread new_clock -> kops/s: 2.984 io_bytes/op: 1.05341e+07 miss_ratio: 0.606198 max_rss_mb: 898.27
gt_clock is clearly blowing way past its memory budget for lower miss rates and best throughput. new_clock also seems to be exceeding budgets, and this warrants more investigation but is not the use case we are targeting with the new cache. With partitioned index+filter, the miss ratio is much better, and although still high enough that the eviction CPU time is definitely offsetting mutex contention:
13MB 1thread base -> kops/s: 16.326 io_bytes/op: 23743.9 miss_ratio: 0.205362 max_rss_mb: 65.2852
13MB 1thread folly -> kops/s: 15.574 io_bytes/op: 19415 miss_ratio: 0.184157 max_rss_mb: 56.3516
13MB 1thread gt_clock -> kops/s: 14.459 io_bytes/op: 22873 miss_ratio: 0.198355 max_rss_mb: 63.9688
13MB 1thread new_clock -> kops/s: 16.34 io_bytes/op: 24386.5 miss_ratio: 0.210512 max_rss_mb: 61.707
13MB 128thread base -> kops/s: 289.786 io_bytes/op: 23710.9 miss_ratio: 0.205056 max_rss_mb: 103.57
13MB 128thread folly -> kops/s: 185.282 io_bytes/op: 19433.1 miss_ratio: 0.184275 max_rss_mb: 116.219
13MB 128thread gt_clock -> kops/s: 354.451 io_bytes/op: 23150.6 miss_ratio: 0.200495 max_rss_mb: 102.871
13MB 128thread new_clock -> kops/s: 295.359 io_bytes/op: 24626.4 miss_ratio: 0.212452 max_rss_mb: 121.109
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10626
Test Plan: updated unit tests, stress/crash test runs including with TSAN, ASAN, UBSAN
Reviewed By: anand1976
Differential Revision: D39368406
Pulled By: pdillinger
fbshipit-source-id: 5afc44da4c656f8f751b44552bbf27bd3ca6fef9
|
||
|
Bo Wang
|
d490bfcdb6 |
Avoid recompressing cold block in CompressedSecondaryCache (#10527)
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
|
||
|
Gang Liao
|
275cd80cdb |
Add a blob-specific cache priority (#10461)
Summary: RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them. This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461 Reviewed By: siying Differential Revision: D38672823 Pulled By: ltamasi fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743 |
||
|
Peter Dillinger
|
86a1e3e0e7 |
Derive cache keys from SST unique IDs (#10394)
Summary: ... so that cache keys can be derived from DB manifest data before reading the file from storage--so that every part of the file can potentially go in a persistent cache. See updated comments in cache_key.cc for technical details. Importantly, the new cache key encoding uses some fancy but efficient math to pack data into the cache key without depending on the sizes of the various pieces. This simplifies some existing code creating cache keys, like cache warming before the file size is known. This should provide us an essentially permanent mapping between SST unique IDs and base cache keys, with the ability to "upgrade" SST unique IDs (and thus cache keys) with new SST format_versions. These cache keys are of similar, perhaps indistinguishable quality to the previous generation. Before this change (see "corrected" days between collision): ``` ./cache_bench -stress_cache_key -sck_keep_bits=43 18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected) ``` After this change (keep 43 bits, up through 50, to validate "trajectory" is ok on "corrected" days between collision): ``` 19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected) 16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected) 15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected) 15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected) 15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected) 15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected) 15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected) 15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected) ``` However, the change does modify (probably weaken) the "guaranteed unique" promise from this > SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86 to this (see https://github.com/facebook/rocksdb/issues/10388) > With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits I don't think this is a practical concern, though. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394 Test Plan: unit tests updated, see simulation results above Reviewed By: jay-zhuang Differential Revision: D38667529 Pulled By: pdillinger fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba |
||
|
Peter Dillinger
|
65036e4217 |
Revert "Add a blob-specific cache priority (#10309)" (#10434)
Summary:
This reverts commit
|
||
|
Gang Liao
|
8d178090be |
Add a blob-specific cache priority (#10309)
Summary: RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them. This task is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309 Reviewed By: ltamasi Differential Revision: D38211655 Pulled By: gangliao fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5 |
||
|
Guido Tagliavini Ponce
|
9d7de6517c |
Towards a production-quality ClockCache (#10418)
Summary: In this PR we bring ClockCache closer to production quality. We implement the following changes: 1. Fixed a few bugs in ClockCache. 2. ClockCache now fully supports ``strict_capacity_limit == false``: When an insertion over capacity is commanded, we allocate a handle separately from the hash table. 3. ClockCache now runs on almost every test in cache_test. The only exceptions are a test where either the LRU policy is required, and a test that dynamically increases the table capacity. 4. ClockCache now supports dynamically decreasing capacity via SetCapacity. (This is easy: we shrink the capacity upper bound and run the clock algorithm.) 5. Old FastLRUCache tests in lru_cache_test.cc are now also used on ClockCache. As a byproduct of 1. and 2. we are able to turn on ClockCache in the stress tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10418 Test Plan: - ``make -j24 USE_CLANG=1 COMPILE_WITH_ASAN=1 COMPILE_WITH_UBSAN=1 check`` - ``make -j24 USE_CLANG=1 COMPILE_WITH_TSAN=1 check`` - ``make -j24 USE_CLANG=1 COMPILE_WITH_ASAN=1 COMPILE_WITH_UBSAN=1 CRASH_TEST_EXT_ARGS="--duration=960 --cache_type=clock_cache" blackbox_crash_test_with_atomic_flush`` - ``make -j24 USE_CLANG=1 COMPILE_WITH_TSAN=1 CRASH_TEST_EXT_ARGS="--duration=960 --cache_type=clock_cache" blackbox_crash_test_with_atomic_flush`` Reviewed By: pdillinger Differential Revision: D38170673 Pulled By: guidotag fbshipit-source-id: 508987b9dc9d9d68f1a03eefac769820b680340a |
||
|
Gang Liao
|
0b6bc101ba |
Charge blob cache usage against the global memory limit (#10321)
Summary: To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different. This PR is a part of https://github.com/facebook/rocksdb/issues/10156 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321 Reviewed By: ltamasi Differential Revision: D37913590 Pulled By: gangliao fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72 |
||
|
Guido Tagliavini Ponce
|
c277aeb42c |
Midpoint insertions in ClockCache (#10305)
Summary: When an element is first inserted into the ClockCache, it is now assigned either medium or high clock priority, depending on whether its cache priority is low or high, respectively. This is a variant of LRUCache's midpoint insertions. The main difference is that LRUCache can specify the allocated capacity for high-priority elements via the ``high_pri_pool_ratio`` parameter. Contrarily, in ClockCache, low- and high-priority elements compete for all cache slots, and one group can take over the other (of course, it takes more low-priority insertions to push out high-priority elements). However, just as LRUCache, ClockCache provides the following guarantee: a high-priority element will not be evicted before a low-priority element that was inserted earlier in time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10305 Test Plan: ``make -j24 check`` Reviewed By: pdillinger Differential Revision: D37607787 Pulled By: guidotag fbshipit-source-id: 24d9f2523d2f4e6415e7f0029cc061fa275c2040 |
||
|
Guido Tagliavini Ponce
|
54f678cd86 |
Fix CalcHashBits (#10295)
Summary: We fix two bugs in CalcHashBits. The first one is an off-by-one error: the desired number of table slots is the real number ``capacity / (kLoadFactor * handle_charge)``, which should not be rounded down. The second one is that we should disallow inputs that set the element charge to 0, namely ``estimated_value_size == 0 && metadata_charge_policy == kDontChargeCacheMetadata``. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10295 Test Plan: CalcHashBits is tested by CalcHashBitsTest (in lru_cache_test.cc). The test now iterates over many more inputs; it covers, in particular, the rounding error edge case. Overall, the test is now more robust. Run ``make -j24 check``. Reviewed By: pdillinger Differential Revision: D37573797 Pulled By: guidotag fbshipit-source-id: ea4f4439f7196ab1c1afb88f566fe92850537262 |
||
|
Guido Tagliavini Ponce
|
57a0e2f304 |
Clock cache (#10273)
Summary: This is the initial step in the development of a lock-free clock cache. This PR includes the base hash table design (which we mostly ported over from FastLRUCache) and the clock eviction algorithm. Importantly, it's still _not_ lock-free---all operations use a shard lock. Besides the locking, there are other features left as future work: - Remove keys from the handles. Instead, use 128-bit bijective hashes of them for handle comparisons, probing (we need two 32-bit hashes of the key for double hashing) and sharding (we need one 6-bit hash). - Remove the clock_usage_ field, which is updated on every lookup. Even if it were atomically updated, it could cause memory invalidations across cores. - Middle insertions into the clock list. - A test that exercises the clock eviction policy. - Update the Java API of ClockCache and Java calls to C++. Along the way, we improved the code and comments quality of FastLRUCache. These changes are relatively minor. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10273 Test Plan: ``make -j24 check`` Reviewed By: pdillinger Differential Revision: D37522461 Pulled By: guidotag fbshipit-source-id: 3d70b737dbb70dcf662f00cef8c609750f083943 |
||
|
Guido Tagliavini Ponce
|
c6055cba30 |
Calculate table size of FastLRUCache more accurately (#10235)
Summary: Calculate the required size of the hash table in FastLRUCache more accurately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10235 Test Plan: ``make -j24 check`` Reviewed By: gitbw95 Differential Revision: D37460546 Pulled By: guidotag fbshipit-source-id: 7945128d6f002832f8ed922ef0151919f4350854 |
||
|
Guido Tagliavini Ponce
|
f105e1a501 |
Make the per-shard hash table fixed-size. (#10154)
Summary: We make the size of the per-shard hash table fixed. The base level of the hash table is now preallocated with the required capacity. The user must provide an estimate of the size of the values. Notice that even though the base level becomes fixed, the chains are still dynamic. Overall, the shard capacity mechanisms haven't changed, so we don't need to test this. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10154 Test Plan: `make -j24 check` Reviewed By: pdillinger Differential Revision: D37124451 Pulled By: guidotag fbshipit-source-id: cba6ac76052fe0ec60b8ff4211b3de7650e80d0c |
||
|
Guido Tagliavini Ponce
|
415200d792 |
Assume fixed size key (#10137)
Summary: FastLRUCache now only supports 16B keys. The tests have changed to reflect this. Because the unit tests were designed for caches that accept any string as keys, some tests are no longer compatible with FastLRUCache. We have disabled those for runs with FastLRUCache. (We could potentially change all tests to use 16B keys, but we don't because the cache public API does not require this.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10137 Test Plan: make -j24 check Reviewed By: gitbw95 Differential Revision: D37083934 Pulled By: guidotag fbshipit-source-id: be1719cf5f8364a9a32bc4555bce1a0de3833b0d |
||
|
gitbw95
|
f241d082b6 |
Prevent double caching in the compressed secondary cache (#9747)
Summary: ### **Summary:** When both LRU Cache and CompressedSecondaryCache are configured together, there possibly are some data blocks double cached. **Changes include:** 1. Update IS_PROMOTED to IS_IN_SECONDARY_CACHE to prevent confusions. 2. This PR updates SecondaryCacheResultHandle and use IsErasedFromSecondaryCache to determine whether the handle is erased in the secondary cache. Then, the caller can determine whether to SetIsInSecondaryCache(). 3. Rename LRUSecondaryCache to CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9747 Test Plan: **Test Scripts:** 1. Populate a DB. The on disk footprint is 482 MB. The data is set to be 50% compressible, so the total decompressed size is expected to be 964 MB. ./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 2. overwrite it to a stable state: ./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 4. Run read tests with diffeernt cache setting: T1: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 T2: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=320000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T3: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 -compressed_secondary_cache_size=400000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 T4: ./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=20000000 -compressed_secondary_cache_size=500000000 --statistics -use_compressed_secondary_cache -db=/db_bench_1 **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 96.2% | |520 MB | 400 MB | 98.3% | |20 MB | 500 MB | 98.8% | **Before this PR** | Cache Size | Compressed Secondary Cache Size | Cache Hit Rate | |------------|-------------------------------------|----------------| |520 MB | 0 MB | 85.5% | |320 MB | 400 MB | 99.9% | |520 MB | 400 MB | 99.9% | |20 MB | 500 MB | 99.2% | Reviewed By: anand1976 Differential Revision: D35117499 Pulled By: gitbw95 fbshipit-source-id: ea2657749fc13efebe91a8a1b56bc61d6a224a12 |
||
|
Andrew Kryczka
|
54fb2a8975 |
Change type of cache buffer passed to Cache::CreateCallback() to const void* (#9595)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9595 Reviewed By: riversand963 Differential Revision: D34329906 Pulled By: ajkr fbshipit-source-id: 508601856fa9bee4d40f4a68d14d333ef2143d40 |
||
|
Peter Dillinger
|
fd3e0f43b3 |
Require C++17 (#9481)
Summary: Drop support for some old compilers by requiring C++17 standard (or higher). See https://github.com/facebook/rocksdb/issues/9388 First modification based on this is to remove some conditional compilation in slice.h (also better for ODR) Also in this PR: * Fix some Makefile formatting that seems to affect ASSERT_STATUS_CHECKED config in some cases * Add c_test to NON_PARALLEL_TEST in Makefile * Fix a clang-analyze reported "potential leak" in lru_cache_test * Better "compatibility" definition of DEFINE_uint32 for old versions of gflags * Fix a linking problem with shared libraries in Makefile (`./random_test: error while loading shared libraries: librocksdb.so.6.29: cannot open shared object file: No such file or directory`) * Always set ROCKSDB_SUPPORT_THREAD_LOCAL and use thread_local (from C++11) * TODO in later PR: clean up that obsolete flag * Fix a cosmetic typo in c.h (https://github.com/facebook/rocksdb/issues/9488) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9481 Test Plan: CircleCI config substantially updated. * Upgrade to latest Ubuntu images for each release * Generally prefer Ubuntu 20, but keep a couple Ubuntu 16 builds with oldest supported compilers, to ensure compatibility * Remove .circleci/cat_ignore_eagain except for Ubuntu 16 builds, because this is to work around a kernel bug that should not affect anything but Ubuntu 16. * Remove designated gcc-9 build, because the default linux build now uses GCC 9 from Ubuntu 20. * Add some `apt-key add` to fix some apt "couldn't be verified" errors * Generally drop SKIP_LINK=1; work-around no longer needed * Generally `add-apt-repository` before `apt-get update` as manual testing indicated the reverse might not work. Travis: * Use gcc-7 by default (remove specific gcc-7 and gcc-4.8 builds) * TODO in later PR: fix s390x "Assembler messages: Error: invalid switch -march=z14" failure AppVeyor: * Completely dropped because we are dropping VS2015 support and CircleCI covers VS >= 2017 Also local testing with old gflags (out of necessity when using ROCKSDB_NO_FBCODE=1). Reviewed By: mrambacher Differential Revision: D33946377 Pulled By: pdillinger fbshipit-source-id: ae077c823905b45370a26c0103ada119459da6c1 |
||
|
Peter Dillinger
|
0050a73a4f |
New stable, fixed-length cache keys (#9126)
Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f |
||
|
Zhichao Cao
|
6d93b87588 |
Add lowest_used_cache_tier to ImmutableDBOptions to enable or disable Secondary Cache (#9050)
Summary: Currently, if Secondary Cache is provided to the lru cache, it is used by default. We add CacheTier to advanced_options.h to describe the cache tier we used. Add a `lowest_used_cache_tier` option to `DBOptions` (immutable) and pass it to BlockBasedTableReader to decide if secondary cache will be used or not. By default it is `CacheTier::kNonVolatileTier`, which means, we always use both block cache (kVolatileTier) and secondary cache (kNonVolatileTier). By set it to `CacheTier::kVolatileTier`, the DB will not use the secondary cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9050 Test Plan: added new tests Reviewed By: anand1976 Differential Revision: D31744769 Pulled By: zhichao-cao fbshipit-source-id: a0575ebd23e1c6dfcfc2b4c8578764e73b15bce6 |
||
|
Zhichao Cao
|
699f45049d |
Introduce a mechanism to dump out blocks from block cache and re-insert to secondary cache (#8912)
Summary: Background: Cache warming up will cause potential read performance degradation due to reading blocks from storage to the block cache. Since in production, the workload and access pattern to a certain DB is stable, it is a potential solution to dump out the blocks belonging to a certain DB to persist storage (e.g., to a file) and bulk-load the blocks to Secondary cache before the DB is relaunched. For example, when migrating a DB form host A to host B, it will take a short period of time, the access pattern to blocks in the block cache will not change much. It is efficient to dump out the blocks of certain DB, migrate to the destination host and insert them to the Secondary cache before we relaunch the DB. Design: we introduce the interface of CacheDumpWriter and CacheDumpRead for user to store the blocks dumped out from block cache. RocksDB will encode all the information and send the string to the writer. User can implement their own writer it they want. CacheDumper and CacheLoad are introduced to save the blocks and load the blocks respectively. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8912 Test Plan: add new tests to lru_cache_test and pass make check. Reviewed By: pdillinger Differential Revision: D31452871 Pulled By: zhichao-cao fbshipit-source-id: 11ab4f5d03e383f476947116361d54188d36ec48 |
||
|
anand76
|
f35042ca40 |
Add a PerfContext counter for secondary cache hits (#8685)
Summary: Add a PerfContext counter. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8685 Reviewed By: zhichao-cao Differential Revision: D30453957 Pulled By: anand1976 fbshipit-source-id: 42888a3ced240e1c44446d52d3b04adfb01f5665 |
||
|
anand76
|
add68bd28a |
Add a stat to count secondary cache hits (#8666)
Summary: Add a stat for secondary cache hits. The ```Cache::Lookup``` API had an unused ```stats``` parameter. This PR uses that to pass the pointer to a ```Statistics``` object that ```LRUCache``` uses to record the stat. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8666 Test Plan: Update a unit test in lru_cache_test Reviewed By: zhichao-cao Differential Revision: D30353816 Pulled By: anand1976 fbshipit-source-id: 2046f78b460428877a26ffdd2bb914ae47dfbe77 |
||
|
Drewryz
|
3b27725245 |
Fix a minor issue with initializing the test path (#8555)
Summary: The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555 Reviewed By: ajkr Differential Revision: D29758399 Pulled By: jay-zhuang fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011 |
||
|
mrambacher
|
570248aeff |
Make SecondaryCache Customizable (#8480)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8480 Reviewed By: zhichao-cao Differential Revision: D29528740 Pulled By: mrambacher fbshipit-source-id: fd0f70d15f66611c8498257a9973f7e98ca13839 |
||
|
anand76
|
8ea0a2c1bd |
Parallelize secondary cache lookup in MultiGet (#8405)
Summary: Implement the ```WaitAll()``` interface in ```LRUCache``` to allow callers to issue multiple lookups in parallel and wait for all of them to complete. Modify ```MultiGet``` to use this to parallelize the secondary cache lookups in order to reduce the overall latency. A call to ```cache->Lookup()``` returns a handle that has an incomplete value (nullptr), and the caller can call ```cache->IsReady()``` to check whether the lookup is complete, and pass a vector of handles to ```WaitAll``` to wait for completion. If any of the lookups fail, ```MultiGet``` will read the block from the SST file. Another change in this PR is to rename ```SecondaryCacheHandle``` to ```SecondaryCacheResultHandle``` as it more accurately describes the return result of the secondary cache lookup, which is more like a future. Tests: 1. Add unit tests in lru_cache_test 2. Benchmark results with no secondary cache configured Master - ``` readrandom : 41.175 micros/op 388562 ops/sec; 106.7 MB/s (7277999 of 7277999 found) readrandom : 41.217 micros/op 388160 ops/sec; 106.6 MB/s (7274999 of 7274999 found) multireadrandom : 10.309 micros/op 1552082 ops/sec; (28908992 of 28908992 found) multireadrandom : 10.321 micros/op 1550218 ops/sec; (29081984 of 29081984 found) ``` This PR - ``` readrandom : 41.158 micros/op 388723 ops/sec; 106.8 MB/s (7290999 of 7290999 found) readrandom : 41.185 micros/op 388463 ops/sec; 106.7 MB/s (7287999 of 7287999 found) multireadrandom : 10.277 micros/op 1556801 ops/sec; (29346944 of 29346944 found) multireadrandom : 10.253 micros/op 1560539 ops/sec; (29274944 of 29274944 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8405 Reviewed By: zhichao-cao Differential Revision: D29190509 Pulled By: anand1976 fbshipit-source-id: 6f8eff6246712af8a297cfe22ea0d1c3b2a01bb0 |
||
|
Zhichao Cao
|
f44e69c64a |
Use DbSessionId as cache key prefix when secondary cache is enabled (#8360)
Summary: Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360 Test Plan: add the test to lru_cache_test Reviewed By: pdillinger Differential Revision: D29006215 Pulled By: zhichao-cao fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814 |
||
|
Zhichao Cao
|
a4405fd981 |
fix lru caching test and fix reference binding to null pointer (#8326)
Summary: Fix for https://github.com/facebook/rocksdb/issues/8315. Inhe lru caching test, 5100 is not enough to hold meta block and first block in some random case, increase to 6100. Fix the reference binding to null pointer, use template. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8326 Test Plan: make check Reviewed By: pdillinger Differential Revision: D28625666 Pulled By: zhichao-cao fbshipit-source-id: 97b85306ae3d09bfb74addc7c65e57fe55a976a5 |
||
|
Zhichao Cao
|
7303d02bdf |
Use new Insert and Lookup APIs in table reader to support secondary cache (#8315)
Summary: Secondary cache is implemented to achieve the secondary cache tier for block cache. New Insert and Lookup APIs are introduced in https://github.com/facebook/rocksdb/issues/8271 . To support and use the secondary cache in block based table reader, this PR introduces the corresponding callback functions that will be used in secondary cache, and update the Insert and Lookup APIs accordingly. benchmarking: ./db_bench --benchmarks="fillrandom" -num=1000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/tmp/rocks_t/db -partition_index_and_filters=true ./db_bench -db=/tmp/rocks_t/db -use_existing_db=true -benchmarks=readrandom -num=1000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=5 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -stats_dump_period_sec=30 -reads=50000000 master benchmarking results: readrandom : 3.923 micros/op 254881 ops/sec; 33.4 MB/s (23849796 of 50000000 found) rocksdb.db.get.micros P50 : 2.820992 P95 : 5.636716 P99 : 16.450553 P100 : 8396.000000 COUNT : 50000000 SUM : 179947064 Current PR benchmarking results readrandom : 4.083 micros/op 244925 ops/sec; 32.1 MB/s (23849796 of 50000000 found) rocksdb.db.get.micros P50 : 2.967687 P95 : 5.754916 P99 : 15.665912 P100 : 8213.000000 COUNT : 50000000 SUM : 187250053 About 3.8% throughput reduction. P50: 5.2% increasing, P95, 2.09% increasing, P99 4.77% improvement Pull Request resolved: https://github.com/facebook/rocksdb/pull/8315 Test Plan: added the testing case Reviewed By: anand1976 Differential Revision: D28599774 Pulled By: zhichao-cao fbshipit-source-id: 098c4df0d7327d3a546df7604b2f1602f13044ed |
||
|
anand76
|
feb06e83b2 |
Initial support for secondary cache in LRUCache (#8271)
Summary: Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache. Tests: Results from cache_bench and db_bench don't show any regression due to these changes. cache_bench results before and after this change - Command ```./cache_bench -ops_per_thread=10000000 -threads=1``` Before ```Complete in 40.688 s; QPS = 245774``` ```Complete in 40.486 s; QPS = 246996``` ```Complete in 42.019 s; QPS = 237989``` After ```Complete in 40.672 s; QPS = 245869``` ```Complete in 44.622 s; QPS = 224107``` ```Complete in 42.445 s; QPS = 235599``` db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 - Commands ```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true``` ```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300``` Before ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found) ``` After ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found) ``` ``` DB path: [/home/anand76/nvm_cache/db] readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271 Reviewed By: zhichao-cao Differential Revision: D28357511 Pulled By: anand1976 fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2 |
||
|
Peter Dillinger
|
78a309bf86 |
New Cache API for gathering statistics (#8225)
Summary: Adds a new Cache::ApplyToAllEntries API that we expect to use (in follow-up PRs) for efficiently gathering block cache statistics. Notable features vs. old ApplyToAllCacheEntries: * Includes key and deleter (in addition to value and charge). We could have passed in a Handle but then more virtual function calls would be needed to get the "fields" of each entry. We expect to use the 'deleter' to identify the origin of entries, perhaps even more. * Heavily tuned to minimize latency impact on operating cache. It does this by iterating over small sections of each cache shard while cycling through the shards. * Supports tuning roughly how many entries to operate on for each lock acquire and release, to control the impact on the latency of other operations without excessive lock acquire & release. The right balance can depend on the cost of the callback. Good default seems to be around 256. * There should be no need to disable thread safety. (I would expect uncontended locks to be sufficiently fast.) I have enhanced cache_bench to validate this approach: * Reports a histogram of ns per operation, so we can look at the ditribution of times, not just throughput (average). * Can add a thread for simulated "gather stats" which calls ApplyToAllEntries at a specified interval. We also generate a histogram of time to run ApplyToAllEntries. To make the iteration over some entries of each shard work as cleanly as possible, even with resize between next set of entries, I have re-arranged which hash bits are used for sharding and which for indexing within a shard. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225 Test Plan: A couple of unit tests are added, but primary validation is manual, as the primary risk is to performance. The primary validation is using cache_bench to ensure that neither the minor hashing changes nor the simulated stats gathering significantly impact QPS or latency distribution. Note that adding op latency histogram seriously impacts the benchmark QPS, so for a fair baseline, we need the cache_bench changes (except remove simulated stat gathering to make it compile). In short, we don't see any reproducible difference in ops/sec or op latency unless we are gathering stats nearly continuously. Test uses 10GB block cache with 8KB values to be somewhat realistic in the number of items to iterate over. Baseline typical output: ``` Complete in 92.017 s; Rough parallel ops/sec = 869401 Thread ops/sec = 54662 Operation latency (ns): Count: 80000000 Average: 11223.9494 StdDev: 29.61 Min: 0 Median: 7759.3973 Max: 9620500 Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58 ------------------------------------------------------ [ 0, 1 ] 68 0.000% 0.000% ( 2900, 4400 ] 89 0.000% 0.000% ( 4400, 6600 ] 33630240 42.038% 42.038% ######## ( 6600, 9900 ] 18129842 22.662% 64.700% ##### ( 9900, 14000 ] 7877533 9.847% 74.547% ## ( 14000, 22000 ] 15193238 18.992% 93.539% #### ( 22000, 33000 ] 3037061 3.796% 97.335% # ( 33000, 50000 ] 1626316 2.033% 99.368% ( 50000, 75000 ] 421532 0.527% 99.895% ( 75000, 110000 ] 56910 0.071% 99.966% ( 110000, 170000 ] 16134 0.020% 99.986% ( 170000, 250000 ] 5166 0.006% 99.993% ( 250000, 380000 ] 3017 0.004% 99.996% ( 380000, 570000 ] 1337 0.002% 99.998% ( 570000, 860000 ] 805 0.001% 99.999% ( 860000, 1200000 ] 319 0.000% 100.000% ( 1200000, 1900000 ] 231 0.000% 100.000% ( 1900000, 2900000 ] 100 0.000% 100.000% ( 2900000, 4300000 ] 39 0.000% 100.000% ( 4300000, 6500000 ] 16 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ``` New, gather_stats=false. Median thread ops/sec of 5 runs: ``` Complete in 92.030 s; Rough parallel ops/sec = 869285 Thread ops/sec = 54458 Operation latency (ns): Count: 80000000 Average: 11298.1027 StdDev: 42.18 Min: 0 Median: 7722.0822 Max: 6398720 Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78 ------------------------------------------------------ [ 0, 1 ] 109 0.000% 0.000% ( 2900, 4400 ] 793 0.001% 0.001% ( 4400, 6600 ] 34054563 42.568% 42.569% ######### ( 6600, 9900 ] 17482646 21.853% 64.423% #### ( 9900, 14000 ] 7908180 9.885% 74.308% ## ( 14000, 22000 ] 15032072 18.790% 93.098% #### ( 22000, 33000 ] 3237834 4.047% 97.145% # ( 33000, 50000 ] 1736882 2.171% 99.316% ( 50000, 75000 ] 446851 0.559% 99.875% ( 75000, 110000 ] 68251 0.085% 99.960% ( 110000, 170000 ] 18592 0.023% 99.983% ( 170000, 250000 ] 7200 0.009% 99.992% ( 250000, 380000 ] 3334 0.004% 99.997% ( 380000, 570000 ] 1393 0.002% 99.998% ( 570000, 860000 ] 700 0.001% 99.999% ( 860000, 1200000 ] 293 0.000% 100.000% ( 1200000, 1900000 ] 196 0.000% 100.000% ( 1900000, 2900000 ] 69 0.000% 100.000% ( 2900000, 4300000 ] 32 0.000% 100.000% ( 4300000, 6500000 ] 10 0.000% 100.000% ``` New, gather_stats=true, 1 second delay between scans. Scans take about 1 second here so it's spending about 50% time scanning. Still the effect on ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs: ``` Complete in 91.890 s; Rough parallel ops/sec = 870608 Thread ops/sec = 54551 Operation latency (ns): Count: 80000000 Average: 11311.2629 StdDev: 45.28 Min: 0 Median: 7686.5458 Max: 10018340 Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86 ------------------------------------------------------ [ 0, 1 ] 71 0.000% 0.000% ( 2900, 4400 ] 291 0.000% 0.000% ( 4400, 6600 ] 34492060 43.115% 43.116% ######### ( 6600, 9900 ] 16727328 20.909% 64.025% #### ( 9900, 14000 ] 7845828 9.807% 73.832% ## ( 14000, 22000 ] 15510654 19.388% 93.220% #### ( 22000, 33000 ] 3216533 4.021% 97.241% # ( 33000, 50000 ] 1680859 2.101% 99.342% ( 50000, 75000 ] 439059 0.549% 99.891% ( 75000, 110000 ] 60540 0.076% 99.967% ( 110000, 170000 ] 14649 0.018% 99.985% ( 170000, 250000 ] 5242 0.007% 99.991% ( 250000, 380000 ] 3260 0.004% 99.995% ( 380000, 570000 ] 1599 0.002% 99.997% ( 570000, 860000 ] 1043 0.001% 99.999% ( 860000, 1200000 ] 471 0.001% 99.999% ( 1200000, 1900000 ] 275 0.000% 100.000% ( 1900000, 2900000 ] 143 0.000% 100.000% ( 2900000, 4300000 ] 60 0.000% 100.000% ( 4300000, 6500000 ] 27 0.000% 100.000% ( 6500000, 9800000 ] 7 0.000% 100.000% ( 9800000, 14000000 ] 1 0.000% 100.000% Gather stats latency (us): Count: 46 Average: 980387.5870 StdDev: 60911.18 Min: 879155 Median: 1033777.7778 Max: 1261431 Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00 ------------------------------------------------------ ( 860000, 1200000 ] 45 97.826% 97.826% #################### ( 1200000, 1900000 ] 1 2.174% 100.000% Most recent cache entry stats: Number of entries: 1295133 Total charge: 9.88 GB Average key size: 23.4982 Average charge: 8.00 KB Unique deleters: 3 ``` Reviewed By: mrambacher Differential Revision: D28295742 Pulled By: pdillinger fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95 |
||
|
storagezhang
|
711881bc25 |
Fix some typos in comments (#8066)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8066 Reviewed By: jay-zhuang Differential Revision: D27280799 Pulled By: mrambacher fbshipit-source-id: 68f91f5af4ffe0a84be581961bf9366887f47702 |
||
|
mrambacher
|
56f468b356 |
Add more tests to ASSERT_STATUS_CHECKED (#7211)
Summary: Added 4 more tests to those which pass ASSERT_STATUS_CHECKED (cache_test, lru_cache_test, filename_test, filelock_test). Pull Request resolved: https://github.com/facebook/rocksdb/pull/7211 Reviewed By: ajkr Differential Revision: D22982858 Pulled By: zhichao-cao fbshipit-source-id: acdd071582ed6aa7447ed96c5732f10bf720d783 |
||
|
sdong
|
fdf882ded2 |
Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e |