Summary:
This PR adds support to return data's approximate unix write time in the iterator property API. The general implementation is:
1) If the entry comes from a SST file, the sequence number to time mapping recorded in that file's table properties will be used to deduce the entry's write time from its sequence number. If no such recording is available, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown except if the entry's sequence number is zero, in which case, 0 is returned. This also means that even if `preclude_last_level_data_seconds` and `preserve_internal_time_seconds` can be toggled off between DB reopens, as long as the SST file's table property has the mapping available, the entry's write time can be deduced and returned.
2) If the entry comes from memtable, we will use the DB's sequence number to write time mapping to do similar things. A copy of the DB's seqno to write time mapping is kept in SuperVersion to allow iterators to have lock free access. This also means a new `SuperVersion` is installed each time DB's seqno to time mapping updates, which is originally proposed by Peter in https://github.com/facebook/rocksdb/issues/11928 . Similarly, if the feature is not enabled, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown.
Needed follow up:
1) The write time for `kTypeValuePreferredSeqno` should be special cased, where it's already specified by the user, so we can directly return it.
2) Flush job can be updated to use DB's seqno to time mapping copy in the SuperVersion.
3) Handle the case when `TimedPut` is called with a write time that is `std::numeric_limits<uint64_t>::max()`. We can make it a regular `Put`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12428
Test Plan: Added unit test
Reviewed By: pdillinger
Differential Revision: D54967067
Pulled By: jowlyzhang
fbshipit-source-id: c795b1b7ec142e09e53f2ed3461cf719833cb37a
Summary:
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR https://github.com/facebook/rocksdb/issues/12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: https://github.com/facebook/rocksdb/issues/11925#11943, and https://github.com/facebook/rocksdb/issues/11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12395
Test Plan:
# Summary
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR #12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: #11925#11943, and #11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
# Test Plan
There should be no behavior changes. Existing tests and CI for the correctness tests.
**Test for Perf Regression**
Build
```
$> make -j64 release
```
Setup
```
$> TEST_TMPDIR=/dev/shm/db_bench ./db_bench -benchmarks="filluniquerandom" -key_size=32 -value_size=512 -num=1000000 -compression_type=none
```
Run
```
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -use_existing_db=1 -benchmarks="newiterator,seekrandom" -cache_size=10485760000
```
Before the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.552 micros/op 1810157 ops/sec 0.552 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.502 micros/op 222143 ops/sec 4.502 seconds 1000000 operations; (0 of 1000000 found)
```
After the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.520 micros/op 1924401 ops/sec 0.520 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.532 micros/op 220657 ops/sec 4.532 seconds 1000000 operations; (0 of 1000000 found)
```
Reviewed By: pdillinger
Differential Revision: D54332713
Pulled By: jaykorean
fbshipit-source-id: b28d897ad519e58b1ca82eb068a6319544a4fae5
Summary:
The following are risks associated with pointer-to-pointer reinterpret_cast:
* Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do.
* Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally.
I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement:
* Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have
`struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic.
* Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance.
With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain.
A couple of related interventions included here:
* Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle.
* Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse).
Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work.
I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308
Test Plan: existing tests, CI
Reviewed By: ltamasi
Differential Revision: D53204947
Pulled By: pdillinger
fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2
Summary:
... when compiled with ASSERT_STATUS_CHECKED = 1.
The main change is in iterator_wrapper.h. The remaining changes are just fixing existing unit tests. Adding this check to IteratorWrapper gives a good coverage as the class is used in many places, including child iterators under merging iterator, merging iterator under DB iter, file_iter under level iterator, etc. This change can catch the bug fixed in https://github.com/facebook/rocksdb/issues/11782.
Future follow up: enable `ASSERT_STATUS_CHECKED=1` for stress test and for DEBUG_LEVEL=0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11975
Test Plan:
* `ASSERT_STATUS_CHECKED=1 DEBUG_LEVEL=2 make -j32 J=32 check`
* I tried to run stress test with `ASSERT_STATUS_CHECKED=1`, but there are a lot of existing stress code that ignore status checking, and fail without the change in this PR. So defer that to a follow up task.
Reviewed By: ajkr
Differential Revision: D50383790
Pulled By: cbi42
fbshipit-source-id: 1a28ce0f5fdf1890f93400b26b3b1b3a287624ce
Summary:
This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically.
The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`.
This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594
Test Plan:
* New unit tests.
* Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case.
TODO in a following PR:
* Stress test Iterator::Refresh() to different snapshots or no snapshot.
Reviewed By: ajkr
Differential Revision: D48456896
Pulled By: cbi42
fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
Summary:
As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion.
There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784
Test Plan:
`make all check`
// Checks success scenario really provide the read consistency attribute as mentioned above.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*`
// Checks failure scenario cleans up SuperVersion properly.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*`
Reviewed By: ltamasi
Differential Revision: D48894795
Pulled By: jowlyzhang
fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6
Summary:
Some repro unit tests for the bug fixed in https://github.com/facebook/rocksdb/pull/11782.
Ran on main without https://github.com/facebook/rocksdb/pull/11782:
```
./db_compaction_test --gtest_filter='*ErrorWhenReadFileHead'
Note: Google Test filter = *ErrorWhenReadFileHead
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.ErrorWhenReadFileHead
db/db_compaction_test.cc:10105: Failure
Value of: s.IsIOError()
Actual: false
Expected: true
[ FAILED ] DBCompactionTest.ErrorWhenReadFileHead (3960 ms)
./db_iterator_test --gtest_filter="*ErrorWhenReadFile*"
Note: Google Test filter = *ErrorWhenReadFile*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBIteratorTest
[ RUN ] DBIteratorTest.ErrorWhenReadFile
db/db_iterator_test.cc:3399: Failure
Value of: (iter->status()).ok()
Actual: true
Expected: false
[ FAILED ] DBIteratorTest.ErrorWhenReadFile (280 ms)
[----------] 1 test from DBIteratorTest (280 ms total)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11788
Reviewed By: ajkr
Differential Revision: D48940284
Pulled By: cbi42
fbshipit-source-id: 06f3c5963f576db3f85d305ffb2745ee13d209bb
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910
Reviewed By: riversand963
Differential Revision: D40880683
Pulled By: ajkr
fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
Summary:
Fix a bug in Iterator::Refresh() where the local SV it obtained could be obsolete upon return, and should be cleaned up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10770
Test Plan: added a unit test to reproduce the issue.
Reviewed By: ajkr
Differential Revision: D40063809
Pulled By: ajkr
fbshipit-source-id: 619e728eb0f1ac9540b4d0ad38e43acc37a514b2
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
When MultiGet() determines that multiple query keys can be
served by examining the same data block in block cache (one Lookup()),
each PinnableSlice referring to data in that data block needs to hold
on to the block in cache so that they can be released at arbitrary
times by the API user. Historically this is accomplished with extra
calls to Ref() on the Handle from Lookup(), with each PinnableSlice
cleanup calling Release() on the Handle, but this creates extra
contention on the block cache for the extra Ref()s and Release()es,
especially because they hit the same cache shard repeatedly.
In the case of merge operands (possibly more cases?), the problem was
compounded by doing an extra Ref()+eventual Release() for each merge
operand for a key reusing a block (which could be the same key!), rather
than one Ref() per key. (Note: the non-shared case with `biter` was
already one per key.)
This change optimizes MultiGet not to rely on these extra, contentious
Ref()+Release() calls by instead, in the shared block case, wrapping
the cache Release() cleanup in a refcounted object referenced by the
PinnableSlices, such that after the last wrapped reference is released,
the cache entry is Release()ed. Relaxed atomic refcounts should be
much faster than mutex-guarded Ref() and Release(), and much less prone
to a performance cliff when MultiGet() does a lot of block sharing.
Note that I did not use std::shared_ptr, because that would require an
extra indirection object (shared_ptr itself new/delete) in order to
associate a ref increment/decrement with a Cleanable cleanup entry. (If
I assumed it was the size of two pointers, I could do some hackery to
make it work without the extra indirection, but that's too fragile.)
Some details:
* Fixed (removed) extra block cache tracing entries in cases of cache
entry reuse in MultiGet, but it's likely that in some other cases traces
are missing (XXX comment inserted)
* Moved existing implementations for cleanable.h from iterator.cc to
new cleanable.cc
* Improved API comments on Cleanable
* Added a public SharedCleanablePtr class to cleanable.h in case others
could benefit from the same pattern (potentially many Cleanables and/or
smart pointers referencing a shared Cleanable)
* Add a typedef for MultiGetContext::Mask
* Some variable renaming for clarity
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899
Test Plan:
Added unit tests for SharedCleanablePtr.
Greatly enhanced ability of existing tests to detect cache use-after-free.
* Release PinnableSlices from MultiGet as they are read rather than in
bulk (in db_test_util wrapper).
* In ASAN build, default to using a trivially small LRUCache for block_cache
so that entries are immediately erased when unreferenced. (Updated two
tests that depend on caching.) New ASAN testsuite running time seems
OK to me.
If I introduce a bug into my implementation where we skip the shared
cleanups on block reuse, ASAN detects the bug in
`db_basic_test *MultiGet*`. If I remove either of the above testing
enhancements, the bug is not detected.
Consider for follow-up work: manipulate or randomize ordering of
PinnableSlice use and release from MultiGet db_test_util wrapper. But in
typical cases, natural ordering gives pretty good functional coverage.
Performance test:
In the extreme (but possible) case of MultiGetting the same or adjacent keys
in a batch, throughput can improve by an order of magnitude.
`./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200`
Before ops/sec, num=5: 1,384,394
Before ops/sec, num=500: 6,423,720
After ops/sec, num=500: 10,658,794
After ops/sec, num=5: 16,027,257
Also note that previously, with high parallelism, having query keys
concentrated in a single block was worse than spreading them out a bit. Now
concentrated in a single block is faster than spread out, which is hopefully
consistent with natural expectation.
Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12):
Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec
After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec
Possibly better, possibly in the noise.
Reviewed By: anand1976
Differential Revision: D35907003
Pulled By: pdillinger
fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
Various tests had disabled valgrind due to it slowing down and timing
out (as is the case right now) the CI runs. Where a test was disabled with no comment,
I assumed slowness was the cause. For these tests that were slow under
valgrind, as well as the ones identified in https://github.com/facebook/rocksdb/issues/8352, this PR moves them
behind the compiler flag `-DROCKSDB_FULL_VALGRIND_RUN`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8475
Test Plan: running `make full_valgrind_test`, `make valgrind_test`, `make check`; will verify they appear working correctly
Reviewed By: jay-zhuang
Differential Revision: D29504843
Pulled By: ajkr
fbshipit-source-id: 2aac90749cfbd30d5ce11cb29a07a1b9314eeea7
Summary:
a trial gtest upgrade discovered some parameterized tests missing instantiation. By some miracle, they still pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8051
Test Plan: thisisthetest
Reviewed By: mrambacher
Differential Revision: D27003684
Pulled By: pdillinger
fbshipit-source-id: cde1cab1551fb282f67d462d46574bd30bd5e61f
Summary:
When changing db iterator direction, we may perform a reseek.
Therefore, we should bump the NUMBER_OF_RESEEKS_IN_ITERATION counter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8015
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D26755415
Pulled By: riversand963
fbshipit-source-id: 211f51f1a454bcda768fc46c0dce51edeb7f05fe
Summary:
The patch adds iterator support to the integrated BlobDB implementation.
Whenever a blob reference is encountered during iteration, the corresponding
blob is retrieved by calling `Version::GetBlob`, assuming the `expose_blob_index`
(formerly `allow_blob`) flag is *not* set. (Note: the flag is set by the old stacked
BlobDB implementation, which has its own blob file handling/blob retrieval logic.)
In addition, `DBIter` now uniformly returns `Status::NotSupported` with the error
message `"BlobDB does not support merge operator."` when encountering a
blob reference while performing a merge (instead of potentially returning a
message that implies the database should be opened using the stacked BlobDB's
`Open`.)
TODO: We can implement support for lazily retrieving the blob value (or in other
words, bypassing the retrieval of blob values based on key) by extending the `Iterator`
API with a new `PrepareValue` method (similarly to `InternalIterator`, which already
supports lazy values).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7731
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25256293
Pulled By: ltamasi
fbshipit-source-id: c39cd782011495a526cdff99c16f5fca400c4811
Summary:
There is an undocumented behavior about a certain combination of options and operations.
- inplace_update_support = true, and
- call `SeekForPrev()`, `SeekToLast()`, and/or `Prev()` on unflushed data.
We should stop the backward iteration and report an error of `Status::NotSupported`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7618
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D24769619
Pulled By: riversand963
fbshipit-source-id: 81d199fa55ed4739ab10e719cc345a992238ccbb
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
And clean up related code, especially in stress test.
(More clean up of db_stress_test_base.cc coming after this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6154
Test Plan: make check, make blackbox_crash_test for a bit
Differential Revision: D18938180
Pulled By: pdillinger
fbshipit-source-id: 524d27621b8dbb25f6dff40f1081e7c00630357e
Summary:
When an iterator reseek happens with the user specifying a new iterate_upper_bound in ReadOptions, and the new seek position is at the end of the same data block, the Seek() ends up using a stale value of data_block_within_upper_bound_ and may return incorrect results.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5883
Test Plan: Added a new test case DBIteratorTest.IterReseekNewUpperBound. Verified that it failed due to the assertion failure without the fix, and passes with the fix.
Differential Revision: D17752740
Pulled By: anand1976
fbshipit-source-id: f9b635ff5d6aeb0e1bef102cf8b2f900efd378e3
Summary:
This reverts commit 9fad3e21eb.
Iterator verification in stress tests sometimes fail for assertion
table/block_based/block_based_table_reader.cc:2973: void rocksdb::BlockBasedTableIterator<TBlockIter, TValue>::FindBlockForward() [with TBlockIter = rocksdb::DataBlockIter; TValue = rocksdb::Slice]: Assertion `!next_block_is_out_of_bound || user_comparator_.Compare(*read_options_.iterate_upper_bound, index_iter_->user_key()) <= 0' failed.
It is likely to be linked to https://github.com/facebook/rocksdb/pull/5286 together with https://github.com/facebook/rocksdb/pull/5468 as the former PR makes some child iterator's seek being avoided, so that upper bound condition fails to be updated there. Strictly speaking, the former PR was merged before the latter one, but the latter one feels a more important improvement so I choose to revert the former one for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5871
Differential Revision: D17689196
fbshipit-source-id: 4ded5be68f67bee2782d31a29cb72ea68f59dd8c
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
Move definition and implementation for ArenaWrappedDBIter into its own .h/.cc files. Also, change inlining of functions to better comply with the Google C++ style guide.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5801
Test Plan: make check
Differential Revision: D17371012
Pulled By: anand1976
fbshipit-source-id: c1361abc2851575111e357a63d88be3b3d6cb341
Summary:
Since https://github.com/facebook/rocksdb/issues/5468 `LevelIterator` compare lower bound and file smallest key on `NewFileIterator` and cache the result to reduce per key lower bound check. However when iterate across file boundary, it doesn't update the cached result since `Valid()=false` because `Valid()` still reflect the status of the previous file iterator. Fixing it by remove the `Valid()` check from `CheckMayBeOutOfLowerBound()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5540
Test Plan:
See the new test.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D16127653
fbshipit-source-id: a0691e1164658d485c17971aaa97028812f74678
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
When reseek happens in merging iterator, reseeking a child iterator can be avoided if:
(1) the iterator represents imutable data
(2) reseek() to a larger key than the current key
(3) the current key of the child iterator is larger than the seek key
because it is guaranteed that the result will fall into the same position.
This optimization will be useful for use cases where users keep seeking to keys nearby in ascending order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5286
Differential Revision: D15283635
Pulled By: siying
fbshipit-source-id: 35f79ffd5ce3609146faa8cd55f2bfd733502f83
Summary:
Right now, when Seek() is called again, RocksDB always does a binary search against the files and index blocks, even if they end up with the same file/block. Improve it as following:
1. in LevelIterator, reseek first try to check the boundary of the current file. If it falls into the same file, skip the binary search to find the file
2. in block based table iterator, reseek skip to reseek the iterator block if the seek key is larger than the current key and lower than the index key (boundary of the current block and the next block).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5256
Differential Revision: D15105072
Pulled By: siying
fbshipit-source-id: 39634bdb4a881082451fa39cecd7ecf12160bf80
Summary:
Improve the iterators performance when the user explicitly sets the readahead size via `ReadOptions.readahead_size`.
1. Stop creating new table readers when the user explicitly sets readahead size.
2. Make use of an internal buffer based on `FilePrefetchBuffer` instead of using `ReadaheadRandomAccessFileReader`, to handle the user readahead requests (for both buffered and direct io cases).
3. Add `readahead_size` to db_bench.
**Benchmarks:**
https://gist.github.com/sagar0/53693edc320a18abeaeca94ca32f5737
For 1 MB readahead, Buffered IO performance improves by 28% and Direct IO performance improves by 50%.
For 512KB readahead, Buffered IO performance improves by 30% and Direct IO performance improves by 67%.
**Test Plan:**
Updated `DBIteratorTest.ReadAhead` test to make sure that:
- no new table readers are created for iterators on setting ReadOptions.readahead_size
- At least "readahead" number of bytes are actually getting read on each iterator read.
TODO later:
- Use similar logic for compactions as well.
- This ties in nicely with #4052 and paves the way for removing ReadaheadRandomAcessFile later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5246
Differential Revision: D15107946
Pulled By: sagar0
fbshipit-source-id: 2c1149729ca7d779e4e8b7710ba6f4e8cbfd3bea
Summary:
This is second attempt for #5101. Original commit message:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
This patch come with two fixes:
Fix 1: To optimize checking for bounds, we need comparing the bounds with index key as well. However BlockBasedTableIterator doesn't know whether its index iterator is internally using user keys or internal keys. The patch fixes that by extending InternalIterator with a user_key() function that is overridden by In IndexBlockIter.
Fix 2: In #5101 we return `IsOutOfBound()=true` when block index key is out of bound. But the index key can be larger than smallest key of the next file on the level. That file can be within upper bound and should not be filtered out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5142
Differential Revision: D14907113
Pulled By: siying
fbshipit-source-id: ac95775c5b4e7b700f76ab43e39f45402c98fbfb
Summary:
The ReadCallback was shared between all threads in IteratorWithLocalStatistics. A race condition was
hence introduced with recent changes that changes the content of ReadCallback. The patch fixes that by using a separate callback per thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5149
Differential Revision: D14761612
Pulled By: maysamyabandeh
fbshipit-source-id: 814a316aed046c318cb90e22379a6e32ac528949
Summary:
This PR address two open issues:
1. clang analyzer is paranoid about db_ being nullptr after DB::Open calls in the test.
See https://github.com/facebook/rocksdb/pull/5043#discussion_r271394579
Add an assert to keep clang happy
2. PR https://github.com/facebook/rocksdb/pull/5049 introduced a variable shadowing:
```
db/db_iterator_test.cc: In constructor ‘rocksdb::DBIteratorWithReadCallbackTest_ReadCallback_Test::TestBody()::TestReadCallback::TestReadCallback(rocksdb::SequenceNumber)’:
db/db_iterator_test.cc:2484:9: error: declaration of ‘max_visible_seq’ shadows a member of 'this' [-Werror=shadow]
: ReadCallback(max_visible_seq) {}
^
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5140
Differential Revision: D14735497
Pulled By: miasantreble
fbshipit-source-id: 3219ea75cf4ae04f64d889323f6779e84be98144
