Commit Graph

259 Commits

Author SHA1 Message Date
Yanqin Jin 088b9844d4 Re-enable user-defined timestamp and subcompactions (#10689)
Summary:
Hopefully, we can re-enable the combination of user-defined timestamp and subcompactions
after https://github.com/facebook/rocksdb/issues/10658.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10689

Test Plan:
Make sure the following succeeds on devserver.
make crash_test_with_ts

Reviewed By: ltamasi

Differential Revision: D39556558

Pulled By: riversand963

fbshipit-source-id: 4695f420b1bc9ebf3b24640b693746f4db82c149
2022-09-15 20:21:07 -07:00
Jay Zhuang 1cdc84114f Tiered Storage feature doesn't support BlobDB yet (#10681)
Summary:
Disable the tiered storage + BlobDB test.
Also enable different hot data setting for Tiered compaction

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10681

Reviewed By: ajkr

Differential Revision: D39531941

Pulled By: jay-zhuang

fbshipit-source-id: aa0595eb38d03f17638d300d2e4cc9061429bf61
2022-09-15 08:17:16 -07:00
Akanksha Mahajan 7a9ecdac3c Add auto prefetching parameters to db_bench and db_stress (#10632)
Summary:
Same as title

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10632

Test Plan: make crash_test -j32

Reviewed By: anand1976

Differential Revision: D39241479

Pulled By: akankshamahajan15

fbshipit-source-id: 5db5b0c007da786bacc1b30d8926d36d6d029b87
2022-09-09 12:52:27 -07:00
Andrew Kryczka 4100eb3053 minor cleanups to db_crashtest.py (#10654)
Summary:
Expanded `all_params` to include all parameters crash test may set. Previously, `atomic_flush` was not included in `all_params` and thus was not visible to `finalize_and_sanitize()`. The consequence was manual crash test runs could provide unsafe combinations of parameters to `db_stress`. For example, running `db_crashtest.py` with `-atomic_flush=0` could cause `db_stress` to run with `-atomic_flush=0 -disable_wal=1`, which is known to produce inconsistencies across column families.

While expanding `all_params`, I found we cannot have an entry in it for both `db_stress` and `db_crashtest.py`. So I renamed `enable_tiered_storage` to `test_tiered_storage` for `db_crashtest.py`, which appears more conventional anyways.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10654

Reviewed By: hx235

Differential Revision: D39369349

Pulled By: ajkr

fbshipit-source-id: 31d9010c760c868b20d5e9bd78ba75c8ff3ce348
2022-09-08 17:39:22 -07:00
Andrew Kryczka ccf822492f Reenable sync_fault_injection in crash test (#10172)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10172

Reviewed By: riversand963

Differential Revision: D37164671

Pulled By: ajkr

fbshipit-source-id: 40eb919b8dc261d502510e878ee8ac7874ab35d0
2022-08-31 14:27:23 -07:00
Hui Xiao e7525a1fff Disable use_txn=1 with sync_fault_injection=1 in db_crashtest.py (#10605)
Summary:
**Context/Summary:**
`ExpectedState` is not aware of transaction-related concept so `use_txn=1 ` is not compatible with `sync_fault_injection=1`. Therefore this PR disabled this combination until we expand our correctness testing to transaction related features.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10605

Test Plan:
- Run the following commands to verify `--use_txn` is correctly sanitized
   - `python3 ./tools/db_crashtest.py blackbox --use_txn=1 --sync_fault_injection=1 `
   - `python3 ./tools/db_crashtest.py blackbox --use_txn=0 --sync_fault_injection=1 `

Reviewed By: ajkr

Differential Revision: D39121287

Pulled By: hx235

fbshipit-source-id: 7d5d6dd32479ea1c07df4f38322650f3a60def9c
2022-08-31 13:16:39 -07:00
Andrew Kryczka d95e376368 Disable db_stress features incompatible with unsynced data dropping when sync_fault_injection=1 (#10559)
Summary:
The features that cannot work with disable_wal=1 due to unsynced data dropping (ingest_external_file_one_in and enable_compaction_filter) similarly cannot work with sync_fault_injection=1. This PR prevents those features from being used together with sync_fault_injection=1.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10559

Reviewed By: hx235

Differential Revision: D38953019

Pulled By: ajkr

fbshipit-source-id: 7e2c7644ec84d7323f632cf976bcee00502d0ed7
2022-08-24 21:50:34 -07:00
Changyu Bi d140fbfd7d Add Iterator test against expected state to stress test (#10538)
Summary:
As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913,
`db_stress` does not have much verification for iterator correctness.
It has a `TestIterate()` function, but that is mainly for comparing results
between two iterators, one with `total_order_seek` and the other optionally
sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33
added a new `TestIterateAgainstExpected()` function that compares iterator against
expected state. It locks a range of keys, creates an iterator, does
a random sequence of `Next/Prev` and compares against expected state.
This PR is based on that commit, the main changes include some logs
(for easier debugging if a test fails), a forward and backward scan to
cover the entire locked key range, and a flag for optionally turning on
this version of Iterator testing.

Added constraint that the checks against expected state in
`TestIterateAgainstExpected()` and in `TestGet()` are only turned on
when `--skip_verifydb` flag is not set.
Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538

Test Plan:
Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`,
and a large `--iterpercent` and `--num_iterations`. Checked `op_logs`
manually to ensure expected coverage. Tweaked part of the code in
https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it.
- internally run various flavor of crash test

Reviewed By: ajkr

Differential Revision: D38847269

Pulled By: cbi42

fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 14:59:50 -07:00
Bo Wang 13cb7a84b6 Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache` and add `CompressedSecondaryCache` into stress tests. (#10523)
Summary:
1. Fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache`. To address the test requirements for both CompressedSecondaryCache and CachlibWrapper, a new class variable `base_is_compressed_sec_cache_` is added to determine the different behaviors in `Lookup()` and `WaitAll()`.
2. Add `CompressedSecondaryCache` into stress tests.

Before this PR, memory leak is reported during crash tests if  `CompressedSecondaryCache` is in stress tests. One example is shown as follows:
```
==70722==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 6648240 byte(s) in 83103 object(s) allocated from:
    #0 0x13de9d7 in operator new(unsigned long) (/data/sandcastle/boxes/eden-trunk-hg-fbcode-fbsource/fbcode/buck-out/dbgo/gen/aab7ed39/internal_repo_rocksdb/repo/db_stress+0x13de9d7)
    https://github.com/facebook/rocksdb/issues/1 0x9084c7 in rocksdb::BlocklikeTraits<rocksdb::Block>::Create(rocksdb::BlockContents&&, unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*) internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:128
    https://github.com/facebook/rocksdb/issues/2 0x9084c7 in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)::operator()(void const*, unsigned long, void**, unsigned long*) const internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:34
    https://github.com/facebook/rocksdb/issues/3 0x9082c9 in rocksdb::Block std::__invoke_impl<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::__invoke_other, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:61
    https://github.com/facebook/rocksdb/issues/4 0x90825d in std::enable_if<is_invocable_r_v<rocksdb::Block, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>, rocksdb::Block>::type std::__invoke_r<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:114
    https://github.com/facebook/rocksdb/issues/5 0x9081b0 in std::_Function_handler<rocksdb::Status (void const*, unsigned long, void**, unsigned long*), std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)>::_M_invoke(std::_Any_data const&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:291
    https://github.com/facebook/rocksdb/issues/6 0x991f2c in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)>::operator()(void const*, unsigned long, void**, unsigned long*) const third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:560
    https://github.com/facebook/rocksdb/issues/7 0x990277 in rocksdb::CompressedSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/cache/compressed_secondary_cache.cc:77
    https://github.com/facebook/rocksdb/issues/8 0xd3aa4d in rocksdb::FaultInjectionSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/utilities/fault_injection_secondary_cache.cc:92
    https://github.com/facebook/rocksdb/issues/9 0xeadaab in rocksdb::lru_cache::LRUCacheShard::Lookup(rocksdb::Slice const&, unsigned int, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/lru_cache.cc:445
    https://github.com/facebook/rocksdb/issues/10 0x1064573 in rocksdb::ShardedCache::Lookup(rocksdb::Slice const&, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/sharded_cache.cc:89
    https://github.com/facebook/rocksdb/issues/11 0x8be0df in rocksdb::BlockBasedTable::GetEntryFromCache(rocksdb::CacheTier const&, rocksdb::Cache*, rocksdb::Slice const&, rocksdb::BlockType, bool, rocksdb::GetContext*, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:389
    https://github.com/facebook/rocksdb/issues/12 0x905790 in rocksdb::Status rocksdb::BlockBasedTable::GetDataBlockFromCache<rocksdb::Block>(rocksdb::Slice const&, rocksdb::Cache*, rocksdb::Cache*, rocksdb::ReadOptions const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::UncompressionDict const&, rocksdb::BlockType, bool, rocksdb::GetContext*) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1263
    https://github.com/facebook/rocksdb/issues/13 0x8b9259 in rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, bool, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1559
    https://github.com/facebook/rocksdb/issues/14 0x8b710c in rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool, bool, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1726
    https://github.com/facebook/rocksdb/issues/15 0x8c329f in rocksdb::DataBlockIter* rocksdb::BlockBasedTable::NewDataBlockIterator<rocksdb::DataBlockIter>(rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::DataBlockIter*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::FilePrefetchBuffer*, bool, bool, rocksdb::Status&) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader_impl.h:58
    https://github.com/facebook/rocksdb/issues/16 0x920117 in rocksdb::BlockBasedTableIterator::InitDataBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:262
    https://github.com/facebook/rocksdb/issues/17 0x920d42 in rocksdb::BlockBasedTableIterator::MaterializeCurrentBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:332
    https://github.com/facebook/rocksdb/issues/18 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/19 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/20 0xef9f6c in rocksdb::MergingIterator::PrepareValue() internal_repo_rocksdb/repo/table/merging_iterator.cc:260
    https://github.com/facebook/rocksdb/issues/21 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/22 0xc67bcd in rocksdb::DBIter::FindNextUserEntryInternal(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:326
    https://github.com/facebook/rocksdb/issues/23 0xc66d36 in rocksdb::DBIter::FindNextUserEntry(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:234
    https://github.com/facebook/rocksdb/issues/24 0xc7ab47 in rocksdb::DBIter::Next() internal_repo_rocksdb/repo/db/db_iter.cc:161
    https://github.com/facebook/rocksdb/issues/25 0x70d938 in rocksdb::BatchedOpsStressTest::TestPrefixScan(rocksdb::ThreadState*, rocksdb::ReadOptions const&, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&) internal_repo_rocksdb/repo/db_stress_tool/batched_ops_stress.cc:320
    https://github.com/facebook/rocksdb/issues/26 0x6dc6a8 in rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:907
    https://github.com/facebook/rocksdb/issues/27 0x6867de in rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33
    https://github.com/facebook/rocksdb/issues/28 0xce4cc2 in rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:461
    https://github.com/facebook/rocksdb/issues/29 0x7f23f9068c0e in start_thread /home/engshare/third-party2/glibc/2.34/src/glibc-2.34/nptl/pthread_create.c:434:8
```

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10523

Test Plan:
```
$COMPILE_WITH_ASAN=1  make -j 24
$db_stress J=40 crash_test_with_txn
```

Reviewed By: anand1976

Differential Revision: D38646839

Pulled By: gitbw95

fbshipit-source-id: 9452895c7dc95481a9d7afe83b15193cf5b1c43e
2022-08-18 21:53:27 -07:00
Changyu Bi fd165c869d Add memtable per key-value checksum (#10281)
Summary:
Append per key-value checksum to internal key. These checksums are verified on read paths including Get, Iterator and during Flush. Get and Iterator will return `Corruption` status if there is a checksum verification failure. Flush will make DB become read-only upon memtable entry checksum verification failure.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10281

Test Plan:
- Added new unit test cases: `make check`
- Benchmark on memtable insert
```
TEST_TMPDIR=/dev/shm/memtable_write ./db_bench -benchmarks=fillseq -disable_wal=true -max_write_buffer_number=100 -num=10000000 -min_write_buffer_number_to_merge=100

# avg over 10 runs
Baseline: 1166936 ops/sec
memtable 2 bytes kv checksum : 1.11674e+06 ops/sec (-4%)
memtable 2 bytes kv checksum + write batch 8 bytes kv checksum: 1.08579e+06 ops/sec (-6.95%)
write batch 8 bytes kv checksum: 1.17979e+06 ops/sec (+1.1%)
```
-  Benchmark on only memtable read: ops/sec dropped 31% for `readseq` due to time spend on verifying checksum.
ops/sec for `readrandom` dropped ~6.8%.
```
# Readseq
sudo TEST_TMPDIR=/dev/shm/memtable_read ./db_bench -benchmarks=fillseq,readseq"[-X20]" -disable_wal=true -max_write_buffer_number=100 -num=10000000 -min_write_buffer_number_to_merge=100

readseq [AVG    20 runs] : 7432840 (± 212005) ops/sec;  822.3 (± 23.5) MB/sec
readseq [MEDIAN 20 runs] : 7573878 ops/sec;  837.9 MB/sec

With -memtable_protection_bytes_per_key=2:

readseq [AVG    20 runs] : 5134607 (± 119596) ops/sec;  568.0 (± 13.2) MB/sec
readseq [MEDIAN 20 runs] : 5232946 ops/sec;  578.9 MB/sec

# Readrandom
sudo TEST_TMPDIR=/dev/shm/memtable_read ./db_bench -benchmarks=fillrandom,readrandom"[-X10]" -disable_wal=true -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=100
readrandom [AVG    10 runs] : 140236 (± 3938) ops/sec;    9.8 (± 0.3) MB/sec
readrandom [MEDIAN 10 runs] : 140545 ops/sec;    9.8 MB/sec

With -memtable_protection_bytes_per_key=2:
readrandom [AVG    10 runs] : 130632 (± 2738) ops/sec;    9.1 (± 0.2) MB/sec
readrandom [MEDIAN 10 runs] : 130341 ops/sec;    9.1 MB/sec
```

- Stress test: `python3 -u tools/db_crashtest.py whitebox --duration=1800`

Reviewed By: ajkr

Differential Revision: D37607896

Pulled By: cbi42

fbshipit-source-id: fdaefb475629d2471780d4a5f5bf81b44ee56113
2022-08-12 13:51:32 -07:00
gitbw95 b57155a0bd Revert "Add CompressedSecondaryCache into stress test" #10442 (#10509)
Summary:
Revert https://github.com/facebook/rocksdb/pull/10442 before I find the root cause and fix the memory leak in db_stress tests that are caused by `FaultInjectionSecondaryCache`.

Memory leak is reported during crash tests and one example is shown as follows:
```
==70722==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 6648240 byte(s) in 83103 object(s) allocated from:
    #0 0x13de9d7 in operator new(unsigned long) (/data/sandcastle/boxes/eden-trunk-hg-fbcode-fbsource/fbcode/buck-out/dbgo/gen/aab7ed39/internal_repo_rocksdb/repo/db_stress+0x13de9d7)
    https://github.com/facebook/rocksdb/issues/1 0x9084c7 in rocksdb::BlocklikeTraits<rocksdb::Block>::Create(rocksdb::BlockContents&&, unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*) internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:128
    https://github.com/facebook/rocksdb/issues/2 0x9084c7 in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)::operator()(void const*, unsigned long, void**, unsigned long*) const internal_repo_rocksdb/repo/table/block_based/block_like_traits.h:34
    https://github.com/facebook/rocksdb/issues/3 0x9082c9 in rocksdb::Block std::__invoke_impl<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::__invoke_other, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:61
    https://github.com/facebook/rocksdb/issues/4 0x90825d in std::enable_if<is_invocable_r_v<rocksdb::Block, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>, rocksdb::Block>::type std::__invoke_r<rocksdb::Status, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*, unsigned long, void**, unsigned long*>(std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:114
    https://github.com/facebook/rocksdb/issues/5 0x9081b0 in std::_Function_handler<rocksdb::Status (void const*, unsigned long, void**, unsigned long*), std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> rocksdb::GetCreateCallback<rocksdb::Block>(unsigned long, rocksdb::Statistics*, bool, rocksdb::FilterPolicy const*)::'lambda'(void const*, unsigned long, void**, unsigned long*)>::_M_invoke(std::_Any_data const&, void const*&&, unsigned long&&, void**&&, unsigned long*&&) third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:291
    https://github.com/facebook/rocksdb/issues/6 0x991f2c in std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)>::operator()(void const*, unsigned long, void**, unsigned long*) const third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/std_function.h:560
    https://github.com/facebook/rocksdb/issues/7 0x990277 in rocksdb::CompressedSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/cache/compressed_secondary_cache.cc:77
    https://github.com/facebook/rocksdb/issues/8 0xd3aa4d in rocksdb::FaultInjectionSecondaryCache::Lookup(rocksdb::Slice const&, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, bool, bool&) internal_repo_rocksdb/repo/utilities/fault_injection_secondary_cache.cc:92
    https://github.com/facebook/rocksdb/issues/9 0xeadaab in rocksdb::lru_cache::LRUCacheShard::Lookup(rocksdb::Slice const&, unsigned int, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/lru_cache.cc:445
    https://github.com/facebook/rocksdb/issues/10 0x1064573 in rocksdb::ShardedCache::Lookup(rocksdb::Slice const&, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority, bool, rocksdb::Statistics*) internal_repo_rocksdb/repo/cache/sharded_cache.cc:89
    https://github.com/facebook/rocksdb/issues/11 0x8be0df in rocksdb::BlockBasedTable::GetEntryFromCache(rocksdb::CacheTier const&, rocksdb::Cache*, rocksdb::Slice const&, rocksdb::BlockType, bool, rocksdb::GetContext*, rocksdb::Cache::CacheItemHelper const*, std::function<rocksdb::Status (void const*, unsigned long, void**, unsigned long*)> const&, rocksdb::Cache::Priority) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:389
    https://github.com/facebook/rocksdb/issues/12 0x905790 in rocksdb::Status rocksdb::BlockBasedTable::GetDataBlockFromCache<rocksdb::Block>(rocksdb::Slice const&, rocksdb::Cache*, rocksdb::Cache*, rocksdb::ReadOptions const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::UncompressionDict const&, rocksdb::BlockType, bool, rocksdb::GetContext*) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1263
    https://github.com/facebook/rocksdb/issues/13 0x8b9259 in rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, bool, bool, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1559
    https://github.com/facebook/rocksdb/issues/14 0x8b710c in rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::Block>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::Block>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool, bool, bool) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader.cc:1726
    https://github.com/facebook/rocksdb/issues/15 0x8c329f in rocksdb::DataBlockIter* rocksdb::BlockBasedTable::NewDataBlockIterator<rocksdb::DataBlockIter>(rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::DataBlockIter*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::FilePrefetchBuffer*, bool, bool, rocksdb::Status&) const internal_repo_rocksdb/repo/table/block_based/block_based_table_reader_impl.h:58
    https://github.com/facebook/rocksdb/issues/16 0x920117 in rocksdb::BlockBasedTableIterator::InitDataBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:262
    https://github.com/facebook/rocksdb/issues/17 0x920d42 in rocksdb::BlockBasedTableIterator::MaterializeCurrentBlock() internal_repo_rocksdb/repo/table/block_based/block_based_table_iterator.cc:332
    https://github.com/facebook/rocksdb/issues/18 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/19 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/20 0xef9f6c in rocksdb::MergingIterator::PrepareValue() internal_repo_rocksdb/repo/table/merging_iterator.cc:260
    https://github.com/facebook/rocksdb/issues/21 0xc6a201 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::PrepareValue() internal_repo_rocksdb/repo/table/iterator_wrapper.h:78
    https://github.com/facebook/rocksdb/issues/22 0xc67bcd in rocksdb::DBIter::FindNextUserEntryInternal(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:326
    https://github.com/facebook/rocksdb/issues/23 0xc66d36 in rocksdb::DBIter::FindNextUserEntry(bool, rocksdb::Slice const*) internal_repo_rocksdb/repo/db/db_iter.cc:234
    https://github.com/facebook/rocksdb/issues/24 0xc7ab47 in rocksdb::DBIter::Next() internal_repo_rocksdb/repo/db/db_iter.cc:161
    https://github.com/facebook/rocksdb/issues/25 0x70d938 in rocksdb::BatchedOpsStressTest::TestPrefixScan(rocksdb::ThreadState*, rocksdb::ReadOptions const&, std::vector<int, std::allocator<int> > const&, std::vector<long, std::allocator<long> > const&) internal_repo_rocksdb/repo/db_stress_tool/batched_ops_stress.cc:320
    https://github.com/facebook/rocksdb/issues/26 0x6dc6a8 in rocksdb::StressTest::OperateDb(rocksdb::ThreadState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:907
    https://github.com/facebook/rocksdb/issues/27 0x6867de in rocksdb::ThreadBody(void*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_driver.cc:33
    https://github.com/facebook/rocksdb/issues/28 0xce4cc2 in rocksdb::(anonymous namespace)::StartThreadWrapper(void*) internal_repo_rocksdb/repo/env/env_posix.cc:461
    https://github.com/facebook/rocksdb/issues/29 0x7f23f9068c0e in start_thread /home/engshare/third-party2/glibc/2.34/src/glibc-2.34/nptl/pthread_create.c:434:8
```

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10509

Test Plan:
```
$COMPILE_WITH_ASAN=1  make -j 24
$db_stress J=40 crash_test_with_txn
```

Reviewed By: siying

Differential Revision: D38540648

Pulled By: gitbw95

fbshipit-source-id: 703948e3a7ba40828a6445d00f3e73c184e34bf7
2022-08-09 17:49:01 -07:00
Akanksha Mahajan 563f574372 Disable subcompactions for user_defined_timestamp (#10503)
Summary:
Currently user_defined_timestamp is failing in stress test with
subcompactions. So disabling it for now and will re enable it once its
fixed.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10503

Test Plan: make crash_test_with_ts -j32

Reviewed By: riversand963

Differential Revision: D38510485

Pulled By: akankshamahajan15

fbshipit-source-id: 82fd0ec8cf86a96ff6653edd5bad7623cb9e0a15
2022-08-08 13:11:11 -07:00
Jay Zhuang 1e86d424e4 Tiered storage stress test (#10493)
Summary:
Add Tiered storage stress test and db_bench option

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10493

Test Plan:
new crashtest:
https://app.circleci.com/pipelines/github/facebook/rocksdb/16905/workflows/68c2967c-9274-434f-8506-1403cf441ead

Reviewed By: ajkr

Differential Revision: D38481892

Pulled By: jay-zhuang

fbshipit-source-id: 217a0be4acb93d420222e6ede2a1290d9f464776
2022-08-08 13:08:35 -07:00
gitbw95 e1b176d274 Add CompressedSecondaryCache into stress test (#10442)
Summary:
The secondary cache is randomly disabled or enabled with CompressedSecondaryCache.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10442

Test Plan: - To test that the CompressedSecondaryCache is used and the stress test runs successfully, run  `make -j24 CRASH_TEST_EXT_ARGS=—duration=960 blackbox_crash_test `

Reviewed By: anand1976

Differential Revision: D38290796

Pulled By: gitbw95

fbshipit-source-id: bb7027b39e0ed9c0c62835abe09e759898130ec8
2022-08-01 11:01:03 -07:00
Guido Tagliavini Ponce 9d7de6517c Towards a production-quality ClockCache (#10418)
Summary:
In this PR we bring ClockCache closer to production quality. We implement the following changes:
1. Fixed a few bugs in ClockCache.
2. ClockCache now fully supports ``strict_capacity_limit == false``: When an insertion over capacity is commanded, we allocate a handle separately from the hash table.
3. ClockCache now runs on almost every test in cache_test. The only exceptions are a test where either the LRU policy is required, and a test that dynamically increases the table capacity.
4. ClockCache now supports dynamically decreasing capacity via SetCapacity. (This is easy: we shrink the capacity upper bound and run the clock algorithm.)
5. Old FastLRUCache tests in lru_cache_test.cc are now also used on ClockCache.

As a byproduct of 1. and 2. we are able to turn on ClockCache in the stress tests.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10418

Test Plan:
- ``make -j24 USE_CLANG=1 COMPILE_WITH_ASAN=1 COMPILE_WITH_UBSAN=1 check``
- ``make -j24 USE_CLANG=1 COMPILE_WITH_TSAN=1 check``
- ``make -j24 USE_CLANG=1 COMPILE_WITH_ASAN=1 COMPILE_WITH_UBSAN=1 CRASH_TEST_EXT_ARGS="--duration=960 --cache_type=clock_cache" blackbox_crash_test_with_atomic_flush``
- ``make -j24 USE_CLANG=1 COMPILE_WITH_TSAN=1 CRASH_TEST_EXT_ARGS="--duration=960 --cache_type=clock_cache" blackbox_crash_test_with_atomic_flush``

Reviewed By: pdillinger

Differential Revision: D38170673

Pulled By: guidotag

fbshipit-source-id: 508987b9dc9d9d68f1a03eefac769820b680340a
2022-07-26 17:42:03 -07:00
Gang Liao ec4ebeff30 Support prepopulating/warming the blob cache (#10298)
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.

This task is a part of https://github.com/facebook/rocksdb/issues/10156

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298

Reviewed By: ltamasi

Differential Revision: D37908743

Pulled By: gangliao

fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
2022-07-17 07:13:59 -07:00
Yanqin Jin 7679f22a89 Add coverage for the combination of write-prepared and WAL recycling (#10350)
Summary:
as title.
Test plan
- make check
- CI on PR
- TEST_TMPDIR=/dev/shm make crash_test_with_multiops_wp_txn (tested with successful run)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10350

Reviewed By: ajkr

Differential Revision: D37792872

Pulled By: riversand963

fbshipit-source-id: ff064093b7f715d0acf387af2e3ae87b1278b52b
2022-07-12 13:17:21 -07:00
Yanqin Jin 2f13f5f7d0 Add coverage for timestamped snapshot to MultiOpsTxnsStressTest (#10325)
Summary:
As title.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10325

Test Plan:
```bash
TEST_TMPDIR=/dev/shm/rocksdb/ make crash_test_with_multiops_wc_txn
TEST_TMPDIR=/dev/shm/rocksdb/ make crash_test_with_txn
```

Reviewed By: akankshamahajan15

Differential Revision: D37688742

Pulled By: riversand963

fbshipit-source-id: e198ace921898af63f99e869568c1a7bbf69f1a4
2022-07-11 12:44:08 -07:00
zczhu e716bda010 Add FLAGS_compaction_pri into crash_test (#10255)
Summary:
Add FLAGS_compaction_pri into correctness test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10255

Test Plan: run crash_test with FLAGS_compaction_pri

Reviewed By: ajkr

Differential Revision: D37510372

Pulled By: littlepig2013

fbshipit-source-id: 73d93a0a047d0c3993c8a512383dd6ee6acef641
2022-06-30 22:56:58 -07:00
Guido Tagliavini Ponce 57a0e2f304 Clock cache (#10273)
Summary:
This is the initial step in the development of a lock-free clock cache. This PR includes the base hash table design (which we mostly ported over from FastLRUCache) and the clock eviction algorithm. Importantly, it's still _not_ lock-free---all operations use a shard lock. Besides the locking, there are other features left as future work:
- Remove keys from the handles. Instead, use 128-bit bijective hashes of them for handle comparisons, probing (we need two 32-bit hashes of the key for double hashing) and sharding (we need one 6-bit hash).
- Remove the clock_usage_ field, which is updated on every lookup. Even if it were atomically updated, it could cause memory invalidations across cores.
- Middle insertions into the clock list.
- A test that exercises the clock eviction policy.
- Update the Java API of ClockCache and Java calls to C++.

Along the way, we improved the code and comments quality of FastLRUCache. These changes are relatively minor.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10273

Test Plan: ``make -j24 check``

Reviewed By: pdillinger

Differential Revision: D37522461

Pulled By: guidotag

fbshipit-source-id: 3d70b737dbb70dcf662f00cef8c609750f083943
2022-06-29 21:50:39 -07:00
Yanqin Jin d3de59255a Enable compaction filter for db_stress with user-defined timestamp (#10259)
Summary:
Before this PR, when user-defined timestamp is enabled, db_stress disables compaction filter.

This is no longer necessary after this PR, since the `DbStressCompactionFilter` is now aware of
the presence of timestamps.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10259

Test Plan: TEST_TMPDIR=/dev/shm make crash_test_with_ts

Reviewed By: ajkr

Differential Revision: D37459692

Pulled By: riversand963

fbshipit-source-id: 8fe62e90a63bd9317fe1bb95a2b4984080c9e5ef
2022-06-27 11:53:09 -07:00
Andrew Kryczka f322f273b0 Temporarily disable mempurge in crash test (#10252)
Summary:
Need to disable it for now as CI is failing, particularly `MultiOpsTxnsStressTest`. Investigation details in internal task T124324915. This PR disables mempurge more widely than `MultiOpsTxnsStressTest` until we know the issue is contained to that particular test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10252

Reviewed By: riversand963

Differential Revision: D37432948

Pulled By: ajkr

fbshipit-source-id: d0cf5b0e0ec7c3142c382a0347f35a4c34f4607a
2022-06-24 17:11:27 -07:00
Gang Liao 2352e2dfda Add the blob cache to the stress tests and the benchmarking tool (#10202)
Summary:
In order to facilitate correctness and performance testing, we would like to add the new blob cache to our stress test tool `db_stress` and our continuously running crash test script `db_crashtest.py`, as well as our synthetic benchmarking tool `db_bench` and the BlobDB performance testing script `run_blob_bench.sh`.
As part of this task, we would also like to utilize these benchmarking tools to get some initial performance numbers about the effectiveness of caching blobs.

This PR is a part of https://github.com/facebook/rocksdb/issues/10156

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10202

Reviewed By: ltamasi

Differential Revision: D37325739

Pulled By: gangliao

fbshipit-source-id: deb65d0d414502270dd4c324d987fd5469869fa8
2022-06-22 16:04:03 -07:00
Peter Dillinger 84210c9489 Add data block hash index to crash test, fix MultiGet issue (#10220)
Summary:
There was a bug in the MultiGet enhancement in https://github.com/facebook/rocksdb/issues/9899 with data
block hash index, which was not caught because data block hash index was
never added to stress tests. This change fixes both issues.

Fixes https://github.com/facebook/rocksdb/issues/10186

I intend to pick this into the 7.4.0 release candidate

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10220

Test Plan:
Failure quickly reproduces in crash test with
kDataBlockBinaryAndHash, and does not seem to with the fix. Reproducing
the failure with a unit test I believe would be too tricky and fragile
to be worthwhile.

Reviewed By: anand1976

Differential Revision: D37315647

Pulled By: pdillinger

fbshipit-source-id: 9f648265bba867275edc752f7a56611a59401cba
2022-06-21 16:23:58 -07:00
Guido Tagliavini Ponce 3afed7408c Replace per-shard chained hash tables with open-addressing scheme (#10194)
Summary:
In FastLRUCache, we replace the current chained per-shard hash table by an open-addressing hash table. In particular, this allows us to preallocate all handles.

Because all handles are preallocated, this implementation doesn't support strict_capacity_limit = false (i.e., allowing insertions beyond the predefined capacity). This clashes with current assumptions of some tests, namely two tests in cache_test and the crash tests. We have disabled these for now.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10194

Test Plan: ``make -j24 check``

Reviewed By: pdillinger

Differential Revision: D37296770

Pulled By: guidotag

fbshipit-source-id: 232ff1b8260331d868ebf4e3e5d8ad709390b0ad
2022-06-21 08:45:04 -07:00
Andrew Kryczka 5d6005c780 Add WriteOptions::protection_bytes_per_key (#10037)
Summary:
Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`.

Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user.

There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037

Test Plan:
- Manual
  - Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24`
  - Enabled in MyShadow for 1+ week
- Automated
  - Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions`
  - Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection

Reviewed By: cbi42

Differential Revision: D36614569

Pulled By: ajkr

fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb
2022-06-16 23:10:07 -07:00
Peter Dillinger 126c223714 Remove deprecated block-based filter (#10184)
Summary:
In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using
the public API, because of its inefficiency. Although we normally maintain read compatibility
on old DBs forever, filters are not required for reading a DB, only for optimizing read
performance. Thus, it should be acceptable to remove this code and the substantial
maintenance burden it carries as useful features are developed and validated (such
as user timestamp).

This change completely removes the code for reading and writing the old block-based
filters, net removing about 1370 lines of code no longer needed. Options removed from
testing / benchmarking tools. The prior existence is only evident in a couple of places:
* `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in
a major release to minimize source code incompatibilities.
* A warning is logged when an old table file is opened that used the old block-based
filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing
should suffice. Unfortunately, sst_dump does not tell you whether a file uses
block-based filter, and the structure of the code makes it very difficult to fix.
* To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`)
for metaindex is maintained (for now).

Other notes:
* In some cases where numbers are associated with filter configurations, we have had to
update the assigned numbers so that they all correspond to something that exists.
* Fixed potential stat counting bug by assuming `filter_checked = false` for cases
like `filter == nullptr` rather than assuming `filter_checked = true`
* Removed obsolete `block_offset` and `prefix_extractor` parameters from several
functions.
* Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)`
because the caller guarantees the prefix extractor exists and is compatible

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184

Test Plan:
tests updated, manually test new warning in LOG using base version to
generate a DB

Reviewed By: riversand963

Differential Revision: D37212647

Pulled By: pdillinger

fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
2022-06-16 15:51:33 -07:00
Yanqin Jin ce419c0f10 Allow db_bench and db_stress to set `allow_data_in_errors` (#10171)
Summary:
There is `Options::allow_data_in_errors` that controls whether RocksDB
is allowed to log data, e.g. key, value, etc in LOG files. It is false
by default. However, in db_bench and db_stress, it is often ok to log
data because there is no concern about privacy.

This PR allows db_stress and db_bench to set this option on the command
line, while it remains false by default. Furthermore, make
crash/recovery test driven by db_crashtest.py to opt-in.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10171

Test Plan: Stress test and db_bench

Reviewed By: hx235

Differential Revision: D37163787

Pulled By: riversand963

fbshipit-source-id: 0242f24d292ba15b6faf8ff903963b85d3e011f8
2022-06-15 12:38:04 -07:00
Hui Xiao d665afdbf3 Account memory of FileMetaData in global memory limit (#9924)
Summary:
**Context/Summary:**
As revealed by heap profiling, allocation of `FileMetaData` for [newly created file added to a Version](https://github.com/facebook/rocksdb/pull/9924/files#diff-a6aa385940793f95a2c5b39cc670bd440c4547fa54fd44622f756382d5e47e43R774) can consume significant heap memory. This PR is to account that toward our global memory limit based on block cache capacity.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9924

Test Plan:
- Previous `make check` verified there are only 2 places where the memory of  the allocated `FileMetaData` can be released
- New unit test `TEST_P(ChargeFileMetadataTestWithParam, Basic)`
- db bench (CPU cost of `charge_file_metadata` in write and compact)
   - **write micros/op: -0.24%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 (remove this option for pre-PR) -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'`
   - **compact micros/op -0.87%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 -numdistinct=1000 && ./db_bench -benchmarks=compact -db=$TEST_TMPDIR -use_existing_db=1 -charge_file_metadata=1 -disable_auto_compactions=1 | egrep 'compact'`

table 1 - write

#-run | (pre-PR) avg micros/op | std micros/op | (post-PR)  micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721
20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | -0.3633711465
40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | 0.5289363078
80 | 3.87828 | 0.119007 | 3.86791 | 0.115674 | **-0.2673865734**
160 | 3.87677 | 0.162231 | 3.86739 | 0.16663 | **-0.2419539978**

table 2 - compact

#-run | (pre-PR) avg micros/op | std micros/op | (post-PR)  micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 2,399,650.00 | 96,375.80 | 2,359,537.00 | 53,243.60 | -1.67
20 | 2,410,480.00 | 89,988.00 | 2,433,580.00 | 91,121.20 | 0.96
40 | 2.41E+06 | 121811 | 2.39E+06 | 131525 | **-0.96**
80 | 2.40E+06 | 134503 | 2.39E+06 | 108799 | **-0.78**

- stress test: `python3 tools/db_crashtest.py blackbox --charge_file_metadata=1  --cache_size=1` killed as normal

Reviewed By: ajkr

Differential Revision: D36055583

Pulled By: hx235

fbshipit-source-id: b60eab94707103cb1322cf815f05810ef0232625
2022-06-14 13:06:40 -07:00
Yanqin Jin 1777e5f7e9 Snapshots with user-specified timestamps (#9879)
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.

It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.

This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.

In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.

This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```

If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.

Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();

// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
    std::shared_ptr<TransactionNotifier> notifier,
    TxnTimestamp ts,
    std::shared_ptr<const Snapshot>* ret);

// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```

The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```

We also provide two additional APIs for stats collection and reporting purposes.

```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
    std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
    TxnTimestamp ts_lb,
    TxnTimestamp ts_ub,
    std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```

To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```

Before shutdown, RocksDB will release all timestamped snapshots.

Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.

Timestamped snapshots can also be used with user-defined timestamp.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879

Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```

Reviewed By: siying

Differential Revision: D35783919

Pulled By: riversand963

fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
2022-06-10 16:07:03 -07:00
Akanksha Mahajan ecfd4aef0c Enable wal_compression in crash_tests (#10141)
Summary:
Same as title

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10141

Test Plan:
```
export CRASH_TEST_EXT_ARGS=" --wal_compression=zstd"
 make crash_test -j
```

Reviewed By: riversand963

Differential Revision: D37042810

Pulled By: akankshamahajan15

fbshipit-source-id: 53f0793d78241f1b5c954dcc808cb4c0a3e9172a
2022-06-09 12:08:01 -07:00
Yanqin Jin f890527b16 Update test for secondary instance in stress test (#10121)
Summary:
This PR updates secondary instance testing in stress test by default.

A background thread will be started (disabled by default), running a secondary instance tailing the logs of the primary.

Periodically (every 1 sec), this thread calls `TryCatchUpWithPrimary()` and uses point lookup or range scan
to read some random keys with only very basic verification to make sure no assertion failure is triggered.

Thanks to https://github.com/facebook/rocksdb/issues/10061 , we can enable secondary instance when user-defined timestamp is enabled.

Also removed a less useful test configuration, `secondary_catch_up_one_in`. This is very similar to the periodic
catch-up.

In the last commit, I decided not to enable it now, but just update the tests, since secondary instance does not
work well when the underlying file is renamed by primary, e.g. SstFileManager.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10121

Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_atomic_flush
```

Reviewed By: ajkr

Differential Revision: D36939458

Pulled By: riversand963

fbshipit-source-id: 1c065b7efc3690fc341569b9d369a5cbd8ef6b3e
2022-06-07 21:07:47 -07:00
Yanqin Jin 2b3c50c429 Temporarily disable wal compression (#10108)
Summary:
Will re-enable after fixing the bug in https://github.com/facebook/rocksdb/issues/10099 and https://github.com/facebook/rocksdb/issues/10097.
Right now, the priority is https://github.com/facebook/rocksdb/issues/10087, but the bug in WAL compression prevents the mini crash test from passing.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10108

Reviewed By: pdillinger

Differential Revision: D36897214

Pulled By: riversand963

fbshipit-source-id: d64dc52738222d5f66003f7731dc46eaeed812be
2022-06-03 10:22:52 -07:00
Gang Liao e6432dfd4c Make it possible to enable blob files starting from a certain LSM tree level (#10077)
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.

In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077

Reviewed By: ltamasi

Differential Revision: D36884156

Pulled By: gangliao

fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-02 20:04:33 -07:00
Guido Tagliavini Ponce b4d0e041d0 Add support for FastLRUCache in stress and crash tests. (#10081)
Summary:
Stress tests can run with the experimental FastLRUCache. Crash tests randomly choose between LRUCache and FastLRUCache.

Since only LRUCache supports a secondary cache, we validate the `--secondary_cache_uri` and `--cache_type` flags---when `--secondary_cache_uri` is set, the `--cache_type` is set to `lru_cache`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10081

Test Plan:
- To test that the FastLRUCache is used and the stress test runs successfully, run `make -j24 CRASH_TEST_EXT_ARGS=—duration=960 blackbox_crash_test_with_atomic_flush`. The cache type should sometimes be `fast_lru_cache`.
- To test the flag validation, run `make -j24 CRASH_TEST_EXT_ARGS="--duration=960 --secondary_cache_uri=x" blackbox_crash_test_with_atomic_flush` multiple times. The test will always be aborted (which is okay). Check that the cache type is always `lru_cache`.

Reviewed By: anand1976

Differential Revision: D36839908

Pulled By: guidotag

fbshipit-source-id: ebcdfdcd12ec04c96c09ae5b9c9d1e613bdd1725
2022-06-01 18:00:28 -07:00
Andrew Kryczka f6e45382e9 Disable file ingestion in crash test for CF consistency (#10067)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10067

Reviewed By: jay-zhuang

Differential Revision: D36727948

Pulled By: ajkr

fbshipit-source-id: a3502730412c01ba63d822a5d4bf56f8bae8fcb2
2022-05-26 17:41:30 -07:00
Andrew Kryczka 91ba7837b7 Enable IngestExternalFile() in crash test (#9357)
Summary:
Thanks to https://github.com/facebook/rocksdb/issues/9919 and https://github.com/facebook/rocksdb/issues/10051 the known bugs in file ingestion (besides mmap read + file checksum) are fixed. Now we can  try again to enable file ingestion in crash test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9357

Test Plan: stress file ingestion heavily for an hour: `$ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=1000000 --ingest_external_file_one_in=100 --duration=3600 --interval=20 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152`

Reviewed By: riversand963

Differential Revision: D33410746

Pulled By: ajkr

fbshipit-source-id: d276431390995a67f68390d61c06a40945fdd280
2022-05-26 10:31:37 -07:00
Yanqin Jin 9901e7f681 Enable checkpoint and backup in db_stress when timestamp is enabled (#10047)
Summary:
After https://github.com/facebook/rocksdb/issues/10030 and https://github.com/facebook/rocksdb/issues/10004, we can enable checkpoint and backup in stress tests when
user-defined timestamp is enabled.

This PR has no production risk.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/10047

Test Plan:
```
TEST_TMPDIR=/dev/shm make crash_test_with_ts
```

Reviewed By: jowlyzhang

Differential Revision: D36641565

Pulled By: riversand963

fbshipit-source-id: d86c9d87efcc34c32d1aa176af691d32b897644a
2022-05-24 18:25:43 -07:00
Changyu Bi cc23b46da1 Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857)
Summary:
An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857

Test Plan:
#### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data:
Set up: change the parameter [here](fb9a167a55/tools/db_bench_tool.cc (L1766)) to 16384 to make synthetic data more compressible.
```
# linked local ZSTD with version 1.5.2
# DEBUG_LEVEL=0 ROCKSDB_NO_FBCODE=1 ROCKSDB_DISABLE_ZSTD=1  EXTRA_CXXFLAGS="-DZSTD_STATIC_LINKING_ONLY -DZSTD -I/data/users/changyubi/install/include/" EXTRA_LDFLAGS="-L/data/users/changyubi/install/lib/ -l:libzstd.a" make -j32 db_bench

dict_bytes=16384
train_bytes=1048576
echo "========== No Dictionary =========="
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1
TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 2>&1 | grep elapsed
du -hc /dev/shm/dbbench/*sst | grep total

echo "========== Raw Content Dictionary =========="
TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1
TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench_main -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 2>&1 | grep elapsed
du -hc /dev/shm/dbbench/*sst | grep total

echo "========== FinalizeDictionary =========="
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1
TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 2>&1 | grep elapsed
du -hc /dev/shm/dbbench/*sst | grep total

echo "========== TrainDictionary =========="
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1
TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 2>&1 | grep elapsed
du -hc /dev/shm/dbbench/*sst | grep total

# Result: TrainDictionary is much better on space saving, but FinalizeDictionary seems to use less memory.
# before compression data size: 1.2GB
dict_bytes=16384
max_dict_buffer_bytes =  1048576
                    space   cpu/memory
No Dictionary       468M    14.93user 1.00system 0:15.92elapsed 100%CPU (0avgtext+0avgdata 23904maxresident)k
Raw Dictionary      251M    15.81user 0.80system 0:16.56elapsed 100%CPU (0avgtext+0avgdata 156808maxresident)k
FinalizeDictionary  236M    11.93user 0.64system 0:12.56elapsed 100%CPU (0avgtext+0avgdata 89548maxresident)k
TrainDictionary     84M     7.29user 0.45system 0:07.75elapsed 100%CPU (0avgtext+0avgdata 97288maxresident)k
```

#### Benchmark on 10 sample SST files for spacing saving and CPU time on compression:
FinalizeDictionary is comparable to TrainDictionary in terms of space saving, and takes less time in compression.
```
dict_bytes=16384
train_bytes=1048576

for sst_file in `ls ../temp/myrock-sst/`
do
  echo "********** $sst_file **********"
  echo "========== No Dictionary =========="
  ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD

  echo "========== Raw Content Dictionary =========="
  ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes

  echo "========== FinalizeDictionary =========="
  ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes --compression_use_zstd_finalize_dict

  echo "========== TrainDictionary =========="
  ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes
done

                         010240.sst (Size/Time) 011029.sst              013184.sst              021552.sst              185054.sst              185137.sst              191666.sst              7560381.sst             7604174.sst             7635312.sst
No Dictionary           28165569 / 2614419      32899411 / 2976832      32977848 / 3055542      31966329 / 2004590      33614351 / 1755877      33429029 / 1717042      33611933 / 1776936      33634045 / 2771417      33789721 / 2205414      33592194 / 388254
Raw Content Dictionary  28019950 / 2697961      33748665 / 3572422      33896373 / 3534701      26418431 / 2259658      28560825 / 1839168      28455030 / 1846039      28494319 / 1861349      32391599 / 3095649      33772142 / 2407843      33592230 / 474523
FinalizeDictionary      27896012 / 2650029      33763886 / 3719427      33904283 / 3552793      26008225 / 2198033      28111872 / 1869530      28014374 / 1789771      28047706 / 1848300      32296254 / 3204027      33698698 / 2381468      33592344 / 517433
TrainDictionary         28046089 / 2740037      33706480 / 3679019      33885741 / 3629351      25087123 / 2204558      27194353 / 1970207      27234229 / 1896811      27166710 / 1903119      32011041 / 3322315      32730692 / 2406146      33608631 / 570593
```

#### Decompression/Read test:
With FinalizeDictionary/TrainDictionary, some data structure used for decompression are in stored in dictionary, so they are expected to be faster in terms of decompression/reads.
```
dict_bytes=16384
train_bytes=1048576
echo "No Dictionary"
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=0 > /dev/null 2>&1
TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=0 2>&1 | grep MB/s

echo "Raw Dictionary"
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes > /dev/null 2>&1
TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd  -compression_max_dict_bytes=$dict_bytes 2>&1 | grep MB/s

echo "FinalizeDict"
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false  > /dev/null 2>&1
TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false 2>&1 | grep MB/s

echo "Train Dictionary"
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes > /dev/null 2>&1
TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes 2>&1 | grep MB/s

No Dictionary
readrandom   :      12.183 micros/op 82082 ops/sec 12.183 seconds 1000000 operations;    9.1 MB/s (1000000 of 1000000 found)
Raw Dictionary
readrandom   :      12.314 micros/op 81205 ops/sec 12.314 seconds 1000000 operations;    9.0 MB/s (1000000 of 1000000 found)
FinalizeDict
readrandom   :       9.787 micros/op 102180 ops/sec 9.787 seconds 1000000 operations;   11.3 MB/s (1000000 of 1000000 found)
Train Dictionary
readrandom   :       9.698 micros/op 103108 ops/sec 9.699 seconds 1000000 operations;   11.4 MB/s (1000000 of 1000000 found)
```

Reviewed By: ajkr

Differential Revision: D35720026

Pulled By: cbi42

fbshipit-source-id: 24d230fdff0fd28a1bb650658798f00dfcfb2a1f
2022-05-20 12:09:09 -07:00
Jay Zhuang c6d326d3d7 Track SST unique id in MANIFEST and verify (#9990)
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990

Test Plan: unittests, format-compatible test, mini-crash

Reviewed By: anand1976

Differential Revision: D36381863

Pulled By: jay-zhuang

fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
2022-05-19 11:04:21 -07:00
Hui Xiao 3573558ec5 Rewrite memory-charging feature's option API (#9926)
Summary:
**Context:**
Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`.

Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags.

**Summary:**
- Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that
- Added missing db bench/stress test for some memory charging features
- Renamed related test suite to indicate they are under the same theme of memory charging
- Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication
- Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926

Test Plan:
- New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)`
- New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)`
- CI
- db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR  -charge_compression_dictionary_building_buffer=1(remove this for comparison)  -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'`

#-run | (pre-PR) avg micros/op | std micros/op | (post-PR)  micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721
20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465**
40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078**

- db_stress: `python3 tools/db_crashtest.py blackbox  -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal

Reviewed By: ajkr

Differential Revision: D36054712

Pulled By: hx235

fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 15:01:51 -07:00
Yanqin Jin f6d9730ea1 Fix stress test with best-efforts-recovery (#9986)
Summary:
This PR

- since we are testing with disable_wal = true and best_efforts_recovery, we should set column family count to 1, due to the requirement of `ExpectedState` tracking and replaying logic.
- during backup and checkpoint restore, disable best-efforts-recovery. This does not matter now because db_crashtest.py always disables wal when testing best-efforts-recovery. In the future, if we enable wal, then not setting `restore_opitions.best_efforts_recovery` will cause backup db not to recover the WALs, and differ from db (that enables WAL).
- during verification of backup and checkpoint restore, print the key where inconsistency exists between expected state and db.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9986

Test Plan: TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_best_efforts_recovery

Reviewed By: siying

Differential Revision: D36353105

Pulled By: riversand963

fbshipit-source-id: a484da161273e6216a1f7e245bac15a349693917
2022-05-13 12:29:20 -07:00
Andrew Kryczka e943bbdd2f Temporarily disable sync_fault_injection (#9979)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9979

Reviewed By: siying

Differential Revision: D36301555

Pulled By: ajkr

fbshipit-source-id: ed298d3484b6aad3ef19746e984bf4c52be33a9f
2022-05-11 12:19:07 -07:00
Andrew Kryczka 62d84e2a2b db_stress fault injection in release mode (#9957)
Summary:
Previously all fault injection was ignored in release mode. This PR adds it back except for read fault injection (`--read_fault_one_in > 0`) since its dependency (`IGNORE_STATUS_IF_ERROR`) is unavailable in release mode.

Other notable changes include:

- Moved `EnableWriteErrorInjection()` for `--write_fault_one_in > 0` so it's after `DB::Open()` without depending on `SyncPoint`
- Made `--read_fault_one_in > 0` return an error in release mode
- Updated `db_crashtest.py` to always set `--read_fault_one_in=0` in release mode

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9957

Test Plan:
```
$ DEBUG_LEVEL=0 make -j24 db_stress
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox
```

Reviewed By: anand1976

Differential Revision: D36193830

Pulled By: ajkr

fbshipit-source-id: 0b97946b4e3f06e3e0f6e7833c2763da08ec5321
2022-05-06 11:17:08 -07:00
Andrew Kryczka a62506aee2 Enable unsynced data loss in crash test (#9947)
Summary:
`db_stress` already tracks expected state history to verify prefix-recoverability when `sync_fault_injection` is enabled. This PR enables `sync_fault_injection` in `db_crashtest.py`.

Previously enabling `sync_fault_injection` would cause whole unsynced files to be dropped. This PR adds a more interesting case of losing only the tail of unsynced data by implementing `TestFSWritableFile::RangeSync()` and enabling `{wal_,}bytes_per_sync`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9947

Test Plan:
- regular blackbox, blackbox --simple
- various commands to stress this new case, such as `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=100000 --write_buffer_size=2097152 --avoid_flush_during_recovery=1 --disable_wal=0 --interval=10 --db_write_buffer_size=0 --sync_fault_injection=1 --wal_compression=none --delpercent=0 --delrangepercent=0 --prefixpercent=0 --iterpercent=0 --writepercent=100 --readpercent=0 --wal_bytes_per_sync=131072 --duration=36000 --sync=0 --open_write_fault_one_in=16`

Reviewed By: riversand963

Differential Revision: D36152775

Pulled By: ajkr

fbshipit-source-id: 44b68a7fad0a4cf74af9fe1f39be01baab8141d8
2022-05-05 13:21:03 -07:00
Yanqin Jin 06394ff4e7 Fix a bug of CompactionIterator/CompactionFilter using `Delete` (#9929)
Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.

To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.

In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.

Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929

Test Plan:
make check
make crash_test
make crash_test_with_txn

Reviewed By: anand1976

Differential Revision: D36069678

Pulled By: riversand963

fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
2022-05-02 13:25:45 -07:00
Yanqin Jin 94e245a14d Improve stress test for MultiOpsTxnsStressTest (#9829)
Summary:
Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions.

1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw.
2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true.
3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829

Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn
```

Reviewed By: pdillinger

Differential Revision: D35806678

Pulled By: riversand963

fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616
2022-04-27 17:50:54 -07:00
anand76 c3d7e16252 Add WAL compression to stress tests (#9811)
Summary:
Add the WAL compression feature to the stress test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9811

Reviewed By: riversand963

Differential Revision: D35414316

Pulled By: anand1976

fbshipit-source-id: 0c17b1ec55679a52f088ad368798b57139bd921a
2022-04-06 15:47:09 -07:00
Hui Xiao 49623f9c8e Account memory of big memory users in BlockBasedTable in global memory limit (#9748)
Summary:
**Context:**
Through heap profiling, we discovered that `BlockBasedTableReader` objects can accumulate and lead to high memory usage (e.g, `max_open_file = -1`). These memories are currently not saved, not tracked, not constrained and not cache evict-able. As a first step to improve this, similar to https://github.com/facebook/rocksdb/pull/8428,  this PR is to track an estimate of `BlockBasedTableReader` object's memory in block cache and fail future creation if the memory usage exceeds the available space of cache at the time of creation.

**Summary:**
- Approximate big memory users  (`BlockBasedTable::Rep` and `TableProperties` )' memory usage in addition to the existing estimated ones (filter block/index block/un-compression dictionary)
- Charge all of these memory usages to block cache on `BlockBasedTable::Open()` and release them on `~BlockBasedTable()` as there is no memory usage fluctuation of concern in between
- Refactor on CacheReservationManager (and its call-sites) to add concurrent support for BlockBasedTable  used in this PR.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9748

Test Plan:
- New unit tests
- db bench: `OpenDb` : **-0.52% in ms**
  - Setup `./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -disable_auto_compactions=1 -write_buffer_size=1048576`
  - Repeated run with pre-change w/o feature and post-change with feature, benchmark `OpenDb`:  `./db_bench -benchmarks=readrandom -use_existing_db=1 -db=/dev/shm/testdb -reserve_table_reader_memory=true (remove this when running w/o feature) -file_opening_threads=3 -open_files=-1 -report_open_timing=true| egrep 'OpenDb:'`

#-run | (feature-off) avg milliseconds | std milliseconds | (feature-on) avg milliseconds | std milliseconds | change (%)
-- | -- | -- | -- | -- | --
10 | 11.4018 | 5.95173 | 9.47788 | 1.57538 | -16.87382694
20 | 9.23746 | 0.841053 | 9.32377 | 1.14074 | 0.9343477536
40 | 9.0876 | 0.671129 | 9.35053 | 1.11713 | 2.893283155
80 | 9.72514 | 2.28459 | 9.52013 | 1.0894 | -2.108041632
160 | 9.74677 | 0.991234 | 9.84743 | 1.73396 | 1.032752389
320 | 10.7297 | 5.11555 | 10.547 | 1.97692 | **-1.70275031**
640 | 11.7092 | 2.36565 | 11.7869 | 2.69377 | **0.6635807741**

-  db bench on write with cost to cache in WriteBufferManager (just in case this PR's CRM refactoring accidentally slows down anything in WBM) : `fillseq` : **+0.54% in micros/op**
`./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -disable_auto_compactions=1 -cost_write_buffer_to_cache=true -write_buffer_size=10000000000 | egrep 'fillseq'`

#-run | (pre-PR) avg micros/op | std micros/op | (post-PR)  avg micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 6.15 | 0.260187 | 6.289 | 0.371192 | 2.260162602
20 | 7.28025 | 0.465402 | 7.37255 | 0.451256 | 1.267813605
40 | 7.06312 | 0.490654 | 7.13803 | 0.478676 | **1.060579461**
80 | 7.14035 | 0.972831 | 7.14196 | 0.92971 | **0.02254791432**

-  filter bench: `bloom filter`: **-0.78% in ms/key**
    - ` ./filter_bench -impl=2 -quick -reserve_table_builder_memory=true | grep 'Build avg'`

#-run | (pre-PR) avg ns/key | std ns/key | (post-PR)  ns/key | std ns/key | change (%)
-- | -- | -- | -- | -- | --
10 | 26.4369 | 0.442182 | 26.3273 | 0.422919 | **-0.4145720565**
20 | 26.4451 | 0.592787 | 26.1419 | 0.62451 | **-1.1465262**

- Crash test `python3 tools/db_crashtest.py blackbox --reserve_table_reader_memory=1 --cache_size=1` killed as normal

Reviewed By: ajkr

Differential Revision: D35136549

Pulled By: hx235

fbshipit-source-id: 146978858d0f900f43f4eb09bfd3e83195e3be28
2022-04-06 10:33:00 -07:00
Chen Lixiang cd59b139fc Fix some typos in comments and HISTORY.md (#9798)
Summary:
compation --> compaction

Pull Request resolved: https://github.com/facebook/rocksdb/pull/9798

Reviewed By: ajkr

Differential Revision: D35341611

Pulled By: jay-zhuang

fbshipit-source-id: 5ea07527c311de75cade219456b6ee52b23020f6
2022-04-04 09:32:57 -07:00