mirror of https://github.com/facebook/rocksdb.git
259 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yu Zhang
|
d12aaf23ca |
Fix file deletions in DestroyDB not rate limited (#12891)
Summary: Make `DestroyDB` slowly delete files if it's configured and enabled via `SstFileManager`. It's currently not available mainly because of DeleteScheduler's logic related to tracked total_size_ and total_trash_size_. These accounting and logic should not be applied to `DestroyDB`. This PR adds a `DeleteUnaccountedDBFile` util for this purpose which deletes files without accounting it. This util also supports assigning a file to a specified trash bucket so that user can later wait for a specific trash bucket to be empty. For `DestroyDB`, files with more than 1 hard links will be deleted immediately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12891 Test Plan: Added unit tests, existing tests. Reviewed By: anand1976 Differential Revision: D60300220 Pulled By: jowlyzhang fbshipit-source-id: 8b18109a177a3a9532f6dc2e40e08310c08ca3c7 |
|
|
Hui Xiao
|
408e8d4c85 |
Handle injected write error after successful WAL write in crash test + misc (#12838)
Summary: **Context/Summary:** We discovered the following false positive in our crash test lately: (1) PUT() writes k/v to WAL but fails in `ApplyWALToManifest()`. The k/v is in the WAL (2) Current stress test logic will rollback the expected state of such k/v since PUT() fails (3) If the DB crashes before recovery finishes and reopens, the WAL will be replayed and the k/v is in the DB while the expected state have been roll-backed. We decided to leave those expected state to be pending until the loop-write of the same key succeeds. Bonus: Now that I realized write to manifest can also fail the write which faces the similar problem as https://github.com/facebook/rocksdb/pull/12797, I decided to disable fault injection on user write per thread (instead of globally) when tracing is needed for prefix recovery; some refactory Pull Request resolved: https://github.com/facebook/rocksdb/pull/12838 Test Plan: Rehearsal CI Run below command (varies on sync_fault_injection=1,0 to verify ExpectedState behavior) for a while to ensure crash recovery validation works fine ``` python3 tools/db_crashtest.py --simple blackbox --interval=30 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --adm_policy=1 --advise_random_on_open=0 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=0 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=1 --block_protection_bytes_per_key=4 --block_size=16384 --bloom_before_level=4 --bloom_bits=56.810257702625165 --bottommost_compression_type=none --bottommost_file_compaction_delay=0 --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=1 --charge_table_reader=0 --check_multiget_consistency=0 --check_multiget_entity_consistency=1 --checkpoint_one_in=10000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000 --compact_range_one_in=1000 --compaction_pri=4 --compaction_readahead_size=1048576 --compaction_ttl=10 --compress_format_version=1 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=0 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --daily_offpeak_time_utc=04:00-08:00 --data_block_index_type=1 --db_write_buffer_size=0 --default_temperature=kWarm --default_write_temperature=kCold --delete_obsolete_files_period_micros=30000000 --delpercent=20 --delrangepercent=20 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_file_deletions_one_in=10000 --disable_manual_compaction_one_in=1000000 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=1 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=0 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=0 --enable_write_thread_adaptive_yield=0 --error_recovery_with_no_fault_injection=1 --exclude_wal_from_write_fault_injection=0 --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=crc32c --fill_cache=1 --flush_one_in=1000000 --format_version=3 --get_all_column_family_metadata_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_apis_one_in=1000000 --get_properties_of_all_tables_one_in=1000000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0.5 --index_block_restart_interval=4 --index_shortening=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --inplace_update_support=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --key_may_exist_one_in=100 --last_level_temperature=kWarm --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=10000 --log_file_time_to_roll=60 --log_readahead_size=16777216 --long_running_snapshots=1 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100000 --max_key_len=3 --max_log_file_size=1048576 --max_manifest_file_size=32768 --max_sequential_skip_in_iterations=1 --max_total_wal_size=0 --max_write_batch_group_size_bytes=16 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=8388608 --memtable_insert_hint_per_batch=1 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=1 --metadata_read_fault_one_in=0 --metadata_write_fault_one_in=8 --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_read_fault_one_in=0 --open_metadata_write_fault_one_in=8 --open_read_fault_one_in=0 --open_write_fault_one_in=8 --ops_per_thread=100000000 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=2 --prefix_size=7 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=0 --progress_reports=0 --promote_l0_one_in=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=10 --recycle_log_file_num=1 --reopen=0 --report_bg_io_stats=0 --reset_stats_one_in=1000000 --sample_for_compression=0 --secondary_cache_fault_one_in=0 --set_options_one_in=0 --skip_stats_update_on_db_open=1 --snapshot_hold_ops=100000 --soft_pending_compaction_bytes_limit=68719476736 --sqfc_name=foo --sqfc_version=0 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=0 --strict_bytes_per_sync=1 --subcompactions=4 --sync=1 --sync_fault_injection=0 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --uncache_aggressiveness=239 --universal_max_read_amp=-1 --unpartitioned_pinning=1 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=1 --use_attribute_group=0 --use_delta_encoding=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_cf_iterator=0 --use_multi_get_entity=0 --use_multiget=0 --use_put_entity_one_in=0 --use_sqfc_for_range_queries=1 --use_timed_put_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=8 --writepercent=40 ``` Reviewed By: cbi42 Differential Revision: D59377075 Pulled By: hx235 fbshipit-source-id: 91f602fd67e2d339d378cd28b982095fd073dcb6 |
|
|
Changyu Bi
|
b800b5eb6a |
Deflake ThreadStatus related unit tests (#12858)
Summary:
Unit tests `DBTest.ThreadStatusFlush` and `DBTestWithParam.ThreadStatusSingleCompaction` have been flaky and fail with error message
```
[ RUN ] DBTest.ThreadStatusFlush
op_count: 0, expected_count 1
thread id: 718113, thread status: , cf_name
thread id: 718114, thread status: , cf_name pikachu
/__w/rocksdb/rocksdb/db/db_test.cc:4817: Failure
Value of: VerifyOperationCount(env_, ThreadStatus::OP_FLUSH, 1)
Actual: false
Expected: true
[ FAILED ] DBTest.ThreadStatusFlush (106 ms)
[ RUN ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0
db/db_test.cc:4673: Failure
Expected equality of these values:
op_count
Which is: 0
expected_count
Which is: 1
[ FAILED ] DBTestWithParam/DBTestWithParam.ThreadStatusSingleCompaction/0, where GetParam() = (1, false)
```
One cause for this is that before flush/compaction finishes, we will go through `~WritableFileWriter()`, either for WAL or SST file, and temporarily set thread_operation to UNKNOWN. This UNKNOWN thread operation seem to be there for some stress test verification. This PR fixes these tests by setting the IOActivity in ~WritableFileWriter() for debug build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12858
Test Plan: monitor future test failure.
Reviewed By: hx235
Differential Revision: D59691564
Pulled By: cbi42
fbshipit-source-id: 3f96998bba9d42aba50d1830c2b51bef2dd6705f
|
|
|
Hui Xiao
|
84296bc248 |
Reset seen_injected_error_ with seen_error_ (#12830)
Summary: **Context/Summary** : as titled as seen_injected_error_ is a subcategory of seen_error_ Pull Request resolved: https://github.com/facebook/rocksdb/pull/12830 Test Plan: existing CI as it only affects crash test code Reviewed By: jaykorean Differential Revision: D59249018 Pulled By: hx235 fbshipit-source-id: 20e4c22cade57e12a104a03999e4c841a3648b11 |
|
|
Peter Dillinger
|
efba8f5b27 |
Respect ReadOptions::read_tier in prefetching (#12782)
Summary: a pre-existing flaw revealed by crash test with uncache behavior. Easy fix. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12782 Test Plan: Modified unit test PrefetchTest.Basic (fails without fix) Reviewed By: hx235 Differential Revision: D58757916 Pulled By: pdillinger fbshipit-source-id: 23c0240c7cf0cb0b69a372f9531c07af920e09da |
|
|
Hui Xiao
|
1adb935720 |
Inject more errors to more files in stress test (#12713)
Summary: **Context:** We currently have partial error injection: - DB operation: all read, SST write - DB open: all read, SST write, all metadata write. This PR completes the error injection (with some limitations below): - DB operation & open: all read, all write, all metadata write, all metadata read **Summary:** - Inject retryable metadata read, metadata write error concerning directory (e.g, dir sync, ) or file metadata (e.g, name, size, file creation/deletion...) - Inject retryable errors to all major file types: random access file, sequential file, writable file - Allow db stress test operations to handle above injected errors gracefully without crashing - Change all error injection to thread-local implementation for easier disabling and enabling in the same thread. For example, we can control error handling thread to have no error injection. It's also cleaner in code. - Limitation: compared to before, we now don't have write fault injection for backup/restore CopyOrCreateFiles work threads since they use anonymous background threads as well as read injection for db open bg thread - Add a new flag to test error recovery without error injection so we can test the path where error recovery actually succeeds - Some Refactory & fix to db stress test framework (see PR review comments) - Fix some minor bugs surfaced (see PR review comments) - Limitation: had to disable backup restore with metadata read/write injection since it surfaces too many testing issues. Will add it back later to focus on surfacing actual code/internal bugs first. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12713 Test Plan: - Existing UT - CI with no trivial error failure Reviewed By: pdillinger Differential Revision: D58326608 Pulled By: hx235 fbshipit-source-id: 011b5195aaeb6011641ae0a9194f7f2a0e325ad7 |
|
|
Peter Dillinger
|
0646ec6e2d |
Ensure Close() before LinkFile() for WALs in Checkpoint (#12734)
Summary: POSIX semantics for LinkFile (hard links) allow linking a file that is still being written two, with both the source and destination showing any subsequent writes to the source. This may not be practical semantics for some FileSystem implementations such as remote storage. They might only link the flushed or sync-ed file contents at time of LinkFile, or might even have undefined behavior if LinkFile is called on a file still open for write (not yet "sealed"). This change builds on https://github.com/facebook/rocksdb/issues/12731 to bring more hygiene to our handling of WAL files in Checkpoint. Specifically, we now Close WAL files as soon as they are either (a) inactive and fully synced, or (b) inactive and obsolete (so maybe never fully synced), rather than letting Close() happen in handling obsolete files (maybe a background thread). This should not be a performance issue as Close() should be trivial cost relative to other IO ops, but just in case: * We don't Close() while holding a mutex, to avoid blocking, and * The old behavior is available with a new kill switch option `background_close_inactive_wals`. Stacked on https://github.com/facebook/rocksdb/issues/12731 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12734 Test Plan: Extended existing unit test, especially adding a hygiene check to FaultInjectionTestFS to detect LinkFile() on a file still open for writes. FaultInjectionTestFS already has relevant tracking data, and tests can opt out of the new check, as in a smoke test I have left for the old, deprecated functionality `background_close_inactive_wals=true`. Also ran lengthy blackbox_crash_test to ensure the hygiene check is OK with the crash test. (The only place I can find we use LinkFile in production is Checkpoint.) Reviewed By: cbi42 Differential Revision: D58295284 Pulled By: pdillinger fbshipit-source-id: 64d90ed8477e2366c19eaf9c4c5ad60b82cac5c6 |
|
|
Peter Dillinger
|
98393f0139 |
Fix Checkpoint hard link of inactive but unsynced WAL (#12731)
Summary: Background: there is one active WAL file but there can be several more WAL files in various states. Those other WALs are always in a "flushed" state but could be on the `logs_` list not yet fully synced. We currently allow any WAL that is not the active WAL to be hard-linked when creating a Checkpoint, as although it might still be open for write, we are not appending any more data to it. The problem is that a created Checkpoint is supposed to be fully synced on return of that function, and a hard-linked WAL in the state described above might not be fully synced. (Through some prudence in https://github.com/facebook/rocksdb/issues/10083, it would synced if using track_and_verify_wals_in_manifest=true.) The fix is a step toward a long term goal of removing the need to query the filesystem to determine WAL files and their state. (I consider it dubious any time we independently read from or query metadata from a file we have open for writing, as this makes us more susceptible to FileSystem deficiencies or races.) More specifically: * Detect which WALs might not be fully synced, according to our DBImpl metadata, and prevent hard linking those (with `trim_to_size=true` from `GetLiveFilesStorageInfo()`. And while we're at it, use our known flushed sizes for those WALs. * To avoid a race between that and GetSortedWalFiles(), track a maximum needed WAL number for the Checkpoint/GetLiveFilesStorageInfo. * Because of the level of consistency provided by those two, we no longer need to consider syncing as part of the FlushWAL in GetLiveFilesStorageInfo. (We determine the max WAL number consistent with the manifest file size, while holding DB mutex. Should make track_and_verify_wals_in_manifest happy.) This makes the premise of test PutRaceWithCheckpointTrackedWalSync obsolete (sync point callback no longer hit) so the test is removed, with crash test as backstop for related issues. See https://github.com/facebook/rocksdb/issues/10185 Stacked on https://github.com/facebook/rocksdb/issues/12729 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12731 Test Plan: Expanded an existing test, which now fails before fix. Also long runs of blackbox_crash_test with amplified checkpoint frequency. Reviewed By: cbi42 Differential Revision: D58199629 Pulled By: pdillinger fbshipit-source-id: 376e55f4a2b082cd2adb6408a41209de14422382 |
|
|
Peter Dillinger
|
9f4c597d83 |
FaultInjectionTestFS read unsynced data by default (#12729)
Summary: In places (e.g. GetSortedWals()) RocksDB relies on querying the file size or even reading the contents of files currently open for writing, and as in POSIX semantics, expects to see the flushed size and contents regardless of what has been synced. FaultInjectionTestFS historically did not emulate this behavior, only showing synced data from such read operations. (Different from FaultInjectionTestEnv--sigh.) This change makes the "proper" behavior the default behavior, at least for GetFileSize and FSSequentialFile. However, this new functionality is disabled in db_stress because of undiagnosed, unresolved issues. Also removes unused and confusing field `pos_at_last_flush_` This change is needed to support testing a relevant bug fix (in a follow-up diff). Other suggested follow-up: * Fix db_stress not to rely on the old behavior, and fix a related FIXME in db_stress_test_base.cc in LockWAL testing. * Fill in some corner cases in the FileSystem API for reading unsynced data (see new TODO items). * Consider deprecating and removing Flush() API functions from FileSystem APIs. It is not clear to me that there is a supported scenario in which they do anything but confuse API users and developers. If there is a use for them, it doesn't appear to be tested. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12729 Test Plan: applies to all unit tests successfully, just updating the unit test from https://github.com/facebook/rocksdb/issues/12556 due to relying on the errant behavior. Also added a specific unit test Reviewed By: hx235 Differential Revision: D58091835 Pulled By: pdillinger fbshipit-source-id: f47a63b2b000f5875b6293a98577bff663d7fd33 |
|
|
Hui Xiao
|
d7b938882e |
Sync WAL during db Close() (#12556)
Summary: **Context/Summary:** Below crash test found out we don't sync WAL upon DB close, which can lead to unsynced data loss. This PR syncs it. ``` ./db_stress --threads=1 --disable_auto_compactions=1 --WAL_size_limit_MB=0 --WAL_ttl_seconds=0 --acquire_snapshot_one_in=0 --adaptive_readahead=0 --adm_policy=1 --advise_random_on_open=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --allow_fallocate=0 --async_io=0 --auto_readahead_size=0 --avoid_flush_during_recovery=1 --avoid_flush_during_shutdown=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --bgerror_resume_retry_interval=1000000 --block_align=0 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=1 --bloom_bits=29.895303579352174 --bottommost_compression_type=disable --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_index_and_filter_blocks_with_high_priority=1 --cache_size=33554432 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=0 --compaction_readahead_size=0 --compaction_style=0 --compaction_ttl=0 --compress_format_version=2 --compressed_secondary_cache_ratio=0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=4 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --default_temperature=kUnknown --default_write_temperature=kUnknown --delete_obsolete_files_period_micros=0 --delpercent=0 --delrangepercent=0 --destroy_db_initially=1 --detect_filter_construct_corruption=1 --disable_wal=0 --dump_malloc_stats=0 --enable_checksum_handoff=0 --enable_compaction_filter=0 --enable_custom_split_merge=0 --enable_do_not_compress_roles=1 --enable_index_compression=1 --enable_memtable_insert_with_hint_prefix_extractor=0 --enable_pipelined_write=0 --enable_sst_partitioner_factory=0 --enable_thread_tracking=1 --enable_write_thread_adaptive_yield=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=0 --fifo_allow_compaction=1 --file_checksum_impl=none --fill_cache=0 --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --hard_pending_compaction_bytes_limit=274877906944 --high_pri_pool_ratio=0 --index_block_restart_interval=6 --index_shortening=0 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=0 --key_len_percent_dist=1,30,69 --last_level_temperature=kUnknown --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=0 --log2_keys_per_lock=10 --log_file_time_to_roll=0 --log_readahead_size=16777216 --long_running_snapshots=0 --low_pri_pool_ratio=0 --lowest_used_cache_tier=0 --manifest_preallocation_size=5120 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=2500000 --max_key_len=3 --max_log_file_size=0 --max_manifest_file_size=1073741824 --max_sequential_skip_in_iterations=8 --max_total_wal_size=0 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=0 --memtable_insert_hint_per_batch=0 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --metadata_charge_policy=0 --min_write_buffer_number_to_merge=1 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=3 --optimize_filters_for_hits=1 --optimize_filters_for_memory=1 --optimize_multiget_for_io=0 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_amp_bytes_per_bit=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=0 --recycle_log_file_num=0 --reopen=2 --report_bg_io_stats=1 --sample_for_compression=5 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --skip_stats_update_on_db_open=1 --snapshot_hold_ops=0 --soft_pending_compaction_bytes_limit=68719476736 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --stats_history_buffer_size=1048576 --strict_bytes_per_sync=0 --subcompactions=3 --sync=0 --sync_fault_injection=1 --table_cache_numshardbits=6 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=3 --use_adaptive_mutex=1 --use_adaptive_mutex_lru=0 --use_delta_encoding=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000 --verify_compression=0 --verify_db_one_in=100000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=100 Verification failed for column family 0 key 000000000000B9D1000000000000012B000000000000017D (4756691): value_from_db: , value_from_expected: 010000000504070609080B0A0D0C0F0E111013121514171619181B1A1D1C1F1E212023222524272629282B2A2D2C2F2E313033323534373639383B3A3D3C3F3E, msg: Iterator verification: Value not found: NotFound: Verification failed :( ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12556 Test Plan: - New UT - Same stress test command failed before this fix but pass after - CI Reviewed By: ajkr Differential Revision: D56267964 Pulled By: hx235 fbshipit-source-id: af1b7e8769c129f64ba1c7f1ff17102f1239b929 |
|
|
Yu Zhang
|
241253053a |
Fix delete obsolete files on recovery not rate limited (#12590)
Summary:
This PR fix the issue that deletion of obsolete files during DB::Open are not rate limited.
The root cause is slow deletion is disabled if trash/db size ratio exceeds the configured `max_trash_db_ratio`
|
|
|
Hui Xiao
|
abd6751aba |
Fix wrong padded bytes being used to generate file checksum (#12598)
Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/12542 introduced a bug where wrong padded bytes used to generate file checksum if flush happens during padding. This PR fixed it along with an existing same bug for `perform_data_verification_=true`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12598 Test Plan: - New UT that failed before this fix (`db->VerifyFileChecksums: ...Corruption: ...file checksum mismatch`) and passes after - Benchmark ``` TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillseq[-X300] --num=100000 --block_align=1 --compression_type=none ``` Pre-PR: fillseq [AVG 300 runs] : 421334 (± 4126) ops/sec; 46.6 (± 0.5) MB/sec Post-PR: (no regression observed but a slight improvement) fillseq [AVG 300 runs] : 425768 (± 4309) ops/sec; 47.1 (± 0.5) MB/sec Reviewed By: ajkr, anand1976 Differential Revision: D56725688 Pulled By: hx235 fbshipit-source-id: c1a700a95def8c65c0a21e44f8c1966164925ad5 |
|
|
Hui Xiao
|
7d83b4e3e5 |
Fix file checksum mismatch due to padded bytes when block_align=true (#12542)
Summary:
**Context/Summary:**
When `BlockBasedTableOptions::block_align=true`, we pad bytes to align blocks
|
|
|
anand76
|
97991960e9 |
Retry DB::Open upon a corruption detected while reading the MANIFEST (#12518)
Summary: This PR is a counterpart of https://github.com/facebook/rocksdb/issues/12427 . On file systems that support storage level data checksum and reconstruction, retry opening the DB if a corruption is detected when reading the MANIFEST. This could be done in `log::Reader`, but its a little complicated since the sequential file would have to be reopened in order to re-read the same data, and we may miss some subtle corruptions that don't result in checksum mismatch. The approach chosen here instead is to make the decision to retry in `DBImpl::Recover`, based on either an explicit corruption in the MANIFEST file, or missing SST files due to bad data in the MANIFEST. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12518 Reviewed By: ajkr Differential Revision: D55932155 Pulled By: anand1976 fbshipit-source-id: 51755a29b3eb14b9d8e98534adb2e7d54b12ced9 |
|
|
Peter Dillinger
|
a53ed91691 |
Fix/improve temperature handling for file ingestion (#12402)
Summary: Partly following up on leftovers from https://github.com/facebook/rocksdb/issues/12388 In terms of public API: * Make it clear that IngestExternalFileArg::file_temperature is just a hint for opening the existing file, though it was previously used for both copy-from temp hint and copy-to temp, which was bizarre. * Specify how IngestExternalFile assigns temperature to file ingested into DB. (See details in comments.) This approach is not perfect in terms of matching how the DB assigns temperatures, but was the simplest way to get close. The key complication for matching DB temperature assignments is that ingestion files are copied (to a destination temp) before their target level is determined (in general). * Add a temperature option to SstFileWriter::Open so that files intended for ingestion can be initially written to a chosen temperature. * Note that "fail_if_not_bottommost_level" is obsolete/confusing use of "bottommost" In terms of the implementation, there was a similar bit of oddness with the internal CopyFile API, which only took one temperature, ambiguously applicable to the source, destination, or both. This is also fixed. Eventual suggested follow-up: * Before copying files for ingestion, determine a tentative level assignment to use for destination temperature, and keep that even if final level assignment happens to be different at commit time (rare). * More temperature handling for CreateColumnFamilyWithImport and Checkpoints. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12402 Test Plan: Deeply revamped ExternalSSTFileBasicTest.IngestWithTemperature to test the new changes. Previously this test was insufficient because it was only looking at temperatures according to the DB manifest. Incorporating FileTemperatureTestFS allows us to also test the temperatures in the storage layer. Used macros instead of functions for better tracing to critical source location on test failures. Some enhancements to FileTemperatureTestFS in the process of developing the revamped test. Reviewed By: jowlyzhang Differential Revision: D54442794 Pulled By: pdillinger fbshipit-source-id: 41d9d0afdc073e6a983304c10bbc07c70cc7e995 |
|
|
Peter Dillinger
|
13ef21c22e |
default_write_temperature option (#12388)
Summary: Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats. This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply. Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction. Needed follow-up: Fix temperature handling with external file ingestion Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388 Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.) Reviewed By: jowlyzhang Differential Revision: D54266574 Pulled By: pdillinger fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb |
|
|
Akanksha Mahajan
|
956f1dfde3 |
Change ReadAsync callback API to remove const from FSReadRequest (#11649)
Summary: Modify ReadAsync callback API to remove const from FSReadRequest as const doesn't let to fs_scratch to move the ownership. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11649 Test Plan: CircleCI jobs Reviewed By: anand1976 Differential Revision: D53585309 Pulled By: akankshamahajan15 fbshipit-source-id: 3bff9035db0e6fbbe34721a5963443355807420d |
|
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
|
|
Peter Dillinger
|
76c834e441 |
Remove 'virtual' when implied by 'override' (#12319)
Summary:
... to follow modern C++ style / idioms.
Used this hack:
```
for FILE in `cat my_list_of_files`; do perl -pi -e 'BEGIN{undef $/;} s/ virtual( [^;{]* override)/$1/smg' $FILE; done
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12319
Test Plan: existing tests, CI
Reviewed By: jaykorean
Differential Revision: D53275303
Pulled By: pdillinger
fbshipit-source-id: bc0881af270aa8ef4d0ae4f44c5a6614b6407377
|
|
|
akankshamahajan
|
b9cb7b9644 |
Provide support for FSBuffer for point lookups (#12266)
Summary: Provide support for FSBuffer for point lookups It also add support for compaction and scan reads that goes through BlockFetcher when readahead/prefetching is not enabled. Some of the compaction/Scan reads goes through FilePrefetchBuffer and some through BlockFetcher. This PR add support to use underlying file system scratch buffer for reads that go through BlockFetcher as for FilePrefetch reads, design is complicated to support this feature. Design - In order to use underlying FileSystem provided scratch for Reads, it uses MultiRead with 1 request instead of Read API which required API change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12266 Test Plan: Stress test using underlying file system scratch buffer internally. Reviewed By: anand1976 Differential Revision: D53019089 Pulled By: akankshamahajan15 fbshipit-source-id: 4fe3d090d77363320e4b67186fd4d51c005c0961 |
|
|
Peter Dillinger
|
4e60663b31 |
Remove unnecessary, confusing 'extern' (#12300)
Summary: In C++, `extern` is redundant in a number of cases: * "Global" function declarations and definitions * "Global" variable definitions when already declared `extern` For consistency and simplicity, I've removed these in code that *we own*. In a couple of cases, I removed obsolete declarations, and for MagicNumber constants, I have consolidated the declarations into a header file (format.h) as standard best practice would prescribe. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12300 Test Plan: no functional changes, CI Reviewed By: ajkr Differential Revision: D53148629 Pulled By: pdillinger fbshipit-source-id: fb8d927959892e03af09b0c0d542b0a3b38fd886 |
|
|
Hui Xiao
|
a31fded253 |
Pass rate_limiter_priority from SequentialFileReader to FS (#12296)
Summary: **Context/Summary:** The rate_limiter_priority passed to SequentialFileReader is now passed down to underlying file system. This allows the priority associated with backup/restore SST reads to be exposed to FS. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12296 Test Plan: - Modified existing UT Reviewed By: pdillinger Differential Revision: D53100368 Pulled By: hx235 fbshipit-source-id: b4a28917efbb1b0d16f9d1c2b38769bffcff0f34 |
|
|
akankshamahajan
|
b5bb553d5e |
Fix PREFETCH_BYTES_USEFUL stat calculation (#12251)
Summary: After refactoring of FilePrefetchBuffer, PREFETCH_BYTES_USEFUL was miscalculated. Instead of calculating how many requested bytes are already in the buffer, it took into account alignment as well because aligned_useful_len takes into consideration alignment too. Also refactored the naming of chunk_offset_in_buffer to make it similar to aligned_useful_len Pull Request resolved: https://github.com/facebook/rocksdb/pull/12251 Test Plan: 1. Validated internally through release validation benchmarks. 2. Updated unit test that fails without the fix. Reviewed By: ajkr Differential Revision: D52891112 Pulled By: akankshamahajan15 fbshipit-source-id: 2526a0b0572d473beaf8b841f2f9c2f6275d9779 |
|
|
akankshamahajan
|
1de6940980 |
Fix heap use after free error in FilePrefetchBuffer (#12211)
Summary: Fix heap use after free error in FilePrefetchBuffer Fix heap use after free error in FilePrefetchBuffer Pull Request resolved: https://github.com/facebook/rocksdb/pull/12211 Test Plan: Ran db_stress in ASAN mode ``` ==652957==ERROR: AddressSanitizer: heap-use-after-free on address 0x6150006d8578 at pc 0x7f91f74ae85b bp 0x7f91c25f90c0 sp 0x7f91c25f90b8 READ of size 8 at 0x6150006d8578 thread T48 #0 0x7f91f74ae85a in void __gnu_cxx::new_allocator<rocksdb::BufferInfo*>::construct<rocksdb::BufferInfo*, rocksdb::BufferInfo*&>(rocksdb::BufferInfo**, rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/ext/new_allocator.h:163 https://github.com/facebook/rocksdb/issues/1 0x7f91f74ae85a in void std::allocator_traits<std::allocator<rocksdb::BufferInfo*> >::construct<rocksdb::BufferInfo*, rocksdb::BufferInfo*&>(std::allocator<rocksdb::BufferInfo*>&, rocksdb::BufferInfo**, rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/bits/alloc_traits.h:512 https://github.com/facebook/rocksdb/issues/2 0x7f91f74ae85a in rocksdb::BufferInfo*& std::deque<rocksdb::BufferInfo*, std::allocator<rocksdb::BufferInfo*> >::emplace_back<rocksdb::BufferInfo*&>(rocksdb::BufferInfo*&) /mnt/gvfs/third-party2/libgcc/c00dcc6a3e4125c7e8b248e9a79c14b78ac9e0ca/11.x/platform010/5684a5a/include/c++/trunk/bits/deque.tcc:170 https://github.com/facebook/rocksdb/issues/3 0x7f91f74b93d8 in rocksdb::FilePrefetchBuffer::FreeAllBuffers() file/file_prefetch_buffer.h:557 ``` Reviewed By: ajkr Differential Revision: D52575217 Pulled By: akankshamahajan15 fbshipit-source-id: 6811ec10a393f5a62fedaff0fab5fd6e823c2687 |
|
|
akankshamahajan
|
5cb2d09d47 |
Refactor FilePrefetchBuffer code (#12097)
Summary: Summary - Refactor FilePrefetchBuffer code - Implementation: FilePrefetchBuffer maintains a deque of free buffers (free_bufs_) of size num_buffers_ and buffers (bufs_) which contains the prefetched data. Whenever a buffer is consumed or is outdated (w.r.t. to requested offset), that buffer is cleared and returned to free_bufs_. If a buffer is available in free_bufs_, it's moved to bufs_ and is sent for prefetching. num_buffers_ defines how many buffers are maintained that contains prefetched data. If num_buffers_ == 1, it's a sequential read flow. Read API will be called on that one buffer whenever the data is requested and is not in the buffer. If num_buffers_ > 1, then the data is prefetched asynchronosuly in the buffers whenever the data is consumed from the buffers and that buffer is freed. If num_buffers > 1, then requested data can be overlapping between 2 buffers. To return the continuous buffer overlap_bufs_ is used. The requested data is copied from 2 buffers to the overlap_bufs_ and overlap_bufs_ is returned to the caller. - Merged Sync and Async code flow into one in FilePrefetchBuffer. Test Plan - - Crash test passed - Unit tests - Pending - Benchmarks Pull Request resolved: https://github.com/facebook/rocksdb/pull/12097 Reviewed By: ajkr Differential Revision: D51759552 Pulled By: akankshamahajan15 fbshipit-source-id: 69a352945affac2ed22be96048d55863e0168ad5 |
|
|
Peter Dillinger
|
ed46981bea |
Fix and defend against FilePrefetchBuffer combined with mmap reads (#12206)
Summary: FilePrefetchBuffer makes an unchecked assumption about the behavior of RandomAccessFileReader::Read: that it will write to the provided buffer rather than returning the data in an alternate buffer. FilePrefetchBuffer has been quietly incompatible with mmap reads (e.g. allow_mmap_reads / use_mmap_reads) because in that case an alternate buffer is returned (mmapped memory). This incompatibility currently leads to quiet data corruption, as seen in amplified crash test failure in https://github.com/facebook/rocksdb/issues/12200. In this change, * Check whether RandomAccessFileReader::Read has the expected behavior, and fail if not. (Assertion failure in debug build, return Corruption in release build.) This will detect future regressions synchronously and precisely, rather than relying on debugging downstream data corruption. * Why not recover? My understanding is that FilePrefetchBuffer is not intended for use when RandomAccessFileReader::Read uses an alternate buffer, so quietly recovering could lead to undesirable (inefficient) behavior. * Mention incompatibility with mmap-based readers in the internal API comments for FilePrefetchBuffer * Fix two cases where FilePrefetchBuffer could be used with mmap, both stemming from SstFileDumper, though one fix is in BlockBasedTableReader. There is currently no way to ask a RandomAccessFileReader whether it's using mmap, so we currently have to rely on other options as clues. Keeping separate from https://github.com/facebook/rocksdb/issues/12200 in part because this change is more appropriate for backport than that one. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12206 Test Plan: * Manually verified that the new check aids in debugging. * Unit test added, that fails if either fix is missed. * Ran blackbox_crash_test for hours, with and without https://github.com/facebook/rocksdb/issues/12200 Reviewed By: akankshamahajan15 Differential Revision: D52551701 Pulled By: pdillinger fbshipit-source-id: dea87c5782b7c484a6c6e424585c8832dfc580dc |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
akankshamahajan
|
e7c6259447 |
Make auto_readahead_size default true (#12080)
Summary: Make auto_readahead_size option default true Pull Request resolved: https://github.com/facebook/rocksdb/pull/12080 Test Plan: benchmarks and exisiting tests Reviewed By: anand1976 Differential Revision: D52152132 Pulled By: akankshamahajan15 fbshipit-source-id: f1515563564e77df457dff2e865e4ede8c3ddf44 |
|
|
akankshamahajan
|
c77b50a4fd |
Add AsyncIO support for tuning readahead_size by block cache lookup (#11936)
Summary:
Add support for tuning of readahead_size by block cache lookup for async_io.
**Design/ Implementation** -
**BlockBasedTableIterator.cc** -
`BlockCacheLookupForReadAheadSize` callback API lookups in the block cache and tries to reduce the start
and end offset passed. This function looks into the block cache for the blocks between `start_offset`
and `end_offset` and add all the handles in the queue.
It then iterates from the end in the handles to find first miss block and update the end offset to that block.
It also iterates from the start and find first miss block and update the start offset to that block.
```
_read_curr_block_ argument : True if this call was due to miss in the cache and caller wants to read that block
synchronously.
False if current call is to prefetch additional data in extra buffers
(due to ReadAsync call in FilePrefetchBuffer)
```
In case there is no data to be read in that callback (because of upper_bound or all blocks are in cache),
it updates start and end offset to be equal and that `FilePrefetchBuffer` interprets that as 0 length to be read.
**FilePrefetchBuffer.cc** -
FilePrefetchBuffer calls the callback - `ReadAheadSizeTuning` and pass the start and end offset to that
callback to get updated start and end offset to read based on cache hits/misses.
1. In case of Read calls (when offset passed to FilePrefetchBuffer is on cache miss and that data needs to be read), _read_curr_block_ is passed true.
2. In case of ReadAsync calls, when buffer is all consumed and can go for additional prefetching, the start offset passed is the initial end offset of prev buffer (without any updated offset based on cache hit/miss).
Foreg. if following are the data blocks with cache hit/miss and start offset
and Read API found miss on DB1 and based on readahead_size (50) it passes end offset to be 50.
[DB1 - miss- 0 ] [DB2 - hit -10] [DB3 - miss -20] [DB4 - miss-30] [DB5 - hit-40]
[DB6 - hit-50] [DB7 - miss-60] [DB8 - miss - 70] [DB9 - hit - 80] [DB6 - hit 90]
- For Read call - updated start offset remains 0 but end offset updates to DB4, as DB5 is in cache.
- Read calls saves initial end offset 50 as that was meant to be prefetched.
- Now for next ReadAsync call - the start offset will be 50 (previous buffer initial end offset) and based on readahead_size, end offset will be 100
- On callback, because of cache hits - callback will update the start offset to 60 and end offset to 80 to read only 2 data blocks (DB7 and DB8).
- And for that ReadAsync call - initial end offset will be set to 100 which will again used by next ReadAsync call as start offset.
- `initial_end_offset_` in `BufferInfo` is used to save the initial end offset of that buffer.
- If let's say DB5 and DB6 overlaps in 2 buffers (because of alignment), `prev_buf_end_offset` is passed to make sure already prefetched data is not prefetched again in second buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11936
Test Plan:
- Ran crash_test several times.
- New unit tests added.
Reviewed By: anand1976
Differential Revision: D50906217
Pulled By: akankshamahajan15
fbshipit-source-id: 0d75d3c98274e98aa34901b201b8fb05232139cf
|
|
|
Yu Zhang
|
ba8fa0f546 |
internal_repo_rocksdb (4372117296613874540) (#12117)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12117 Reviewed By: ajkr Differential Revision: D51745846 Pulled By: jowlyzhang fbshipit-source-id: 51c806a484b3b43d174b06d2cfe9499191d09914 |
|
|
anand76
|
e81393e81e |
Add some stats to observe the usefulness of scan prefetching (#11981)
Summary: Add stats for better observability of scan prefetching. Its only implemented for sync scan right now. These stats can help inform future improvements in scan prefetching. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11981 Test Plan: Add a new unit test Reviewed By: akankshamahajan15 Differential Revision: D50516505 Pulled By: anand1976 fbshipit-source-id: cb1cc6cf02df8295930a49c62b11870020df3f97 |
|
|
Changyu Bi
|
d5bc30befa |
Enforce status checking after Valid() returns false for IteratorWrapper (#11975)
Summary: ... when compiled with ASSERT_STATUS_CHECKED = 1. The main change is in iterator_wrapper.h. The remaining changes are just fixing existing unit tests. Adding this check to IteratorWrapper gives a good coverage as the class is used in many places, including child iterators under merging iterator, merging iterator under DB iter, file_iter under level iterator, etc. This change can catch the bug fixed in https://github.com/facebook/rocksdb/issues/11782. Future follow up: enable `ASSERT_STATUS_CHECKED=1` for stress test and for DEBUG_LEVEL=0. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11975 Test Plan: * `ASSERT_STATUS_CHECKED=1 DEBUG_LEVEL=2 make -j32 J=32 check` * I tried to run stress test with `ASSERT_STATUS_CHECKED=1`, but there are a lot of existing stress code that ignore status checking, and fail without the change in this PR. So defer that to a follow up task. Reviewed By: ajkr Differential Revision: D50383790 Pulled By: cbi42 fbshipit-source-id: 1a28ce0f5fdf1890f93400b26b3b1b3a287624ce |
|
|
Akanksha Mahajan
|
018eede679 |
Remove assertion from PrefetchAsync (#11965)
Summary: Remove assertion from PrefetchAsync (roundup_len2 >= alignment) as for non direct_io, buffer size can be less than alignment resulting in assertion. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11965 Test Plan: Ran the issue causing db_stress without this assertion and the verification completes successfully. Reviewed By: anand1976 Differential Revision: D50328955 Pulled By: akankshamahajan15 fbshipit-source-id: 65f55ca230d2bbc63f4e2cc34c7273b22b515879 |
|
|
akankshamahajan
|
97f6f475bc |
Fix various failures in auto_readahead_size (#11884)
Summary: 1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.` **Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator. 2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset` **Fix** - Remove prefetch_buffer to be used when uncompressed dict is read. 3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed. Received signal 6 (Aborted) Invoking GDB for stack trace... db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed` **Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884 Test Plan: Ran various flavors of crash tests locally for the whole duration Reviewed By: anand1976 Differential Revision: D49834201 Pulled By: akankshamahajan15 fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe |
|
|
akankshamahajan
|
3d67b5e8e5 |
Lookup ahead in block cache ahead to tune Readaheadsize (#11860)
Summary: Implement block cache lookup to determine readahead_size during scans. It's enabled if auto_readahead_size, block_cache and iterate_upper_bound - all three are set. Design - 1. Whenever there is a cache miss and FilePrefetchBuffer is called, a callback is made to determine readahead_size for that prefetching. 2. The callback iterates over index and do block cache lookup for each data block handle until existing readahead_size is reached. Then It removes the cache hit data blocks from end to calculate optimized readahead_size. 3. Since index_iter_ is moved, it stores block handles in a queue, and use that queue to get block handle instead of doing index_iter_->Next(). 4. This is for Sync scans. Async scans support is in progress. NOTE: The issue right now is after Seek and Next, if Prev is called, there is no way to do Prev operation. index_iter_ is already pointing to a different block. So it returns "Not supported" in that case with error message - "auto tuning of readahead size is not supported with Prev op" Pull Request resolved: https://github.com/facebook/rocksdb/pull/11860 Test Plan: - Added new unit test - crash_tests - Running scans locally to check for any regression Reviewed By: anand1976 Differential Revision: D49548118 Pulled By: akankshamahajan15 fbshipit-source-id: f1aee409a71b4ad9e5bf3610f43edf30c6630c78 |
|
|
akankshamahajan
|
c1a97fe1f6 |
Fix Assertion `roundup_len2 >= alignment' failed in crash tests (#11852)
Summary: When auto_readahead_size is enabled in async_io, during seek, first buffer will prefetch the data - (current block + readahead till upper_bound). There can be cases where 1. first buffer prefetched all the data till upper bound, or 2. first buffer already has the data from prev seek call and second buffer prefetch further leading to alignment issues. This PR fixes that assertion and second buffer won't go for prefetching if first buffer has already prefetched till upper_bound. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11852 Test Plan: - Added new unit test that failed without this fix. - crash tests passed locally Reviewed By: pdillinger Differential Revision: D49384138 Pulled By: akankshamahajan15 fbshipit-source-id: 54417e909e4d986f1e5a17dbaea059cd4962fd4d |
|
|
akankshamahajan
|
5b5b011cdd |
Avoid double block cache lookup during Seek with async_io option (#11616)
Summary: With the async_io option, the Seek happens in 2 phases. Phase 1 starts an asynchronous read on a block cache miss, and phase 2 waits for it to complete and finishes the seek. In both phases, BlockBasedTable::NewDataBlockIterator is called, which tries to lookup the block cache for the data block first before looking in the prefetch buffer. It's optimized by doing the block cache lookup only in the first phase and save some CPU. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11616 Test Plan: Added unit test Reviewed By: jaykorean Differential Revision: D47477887 Pulled By: akankshamahajan15 fbshipit-source-id: 0355e0a68fc0ea2eb92340ae42735afcdbcbfd79 |
|
|
Hui Xiao
|
ed913513bd |
Fix a bug of rocksdb.file.read.verify.file.checksums.micros not being populated (#11836)
Summary: **Context/Summary:** `rocksdb.file.read.verify.file.checksums.micros ` was added in https://github.com/facebook/rocksdb/pull/11444 but the related path was not populated with statistics and clock object correctly so the actual statistics collection didn't happen. This PR fixed it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11836 Test Plan: Setup: ``` ./db_bench --benchmarks="fillrandom" --file_checksum=1 --num=100 --db=/dev/shm/rocksdb ``` Run: ``` ./db_bench --use_existing_db=1 --benchmarks="verifyfilechecksums" --file_checksum=1 --num=100 --db=/dev/shm/rocksdb --statistics=1 --stats_level=4 ``` Post-PR ``` rocksdb.file.read.verify.file.checksums.micros P50 : 9.000000 P95 : 9.000000 P99 : 9.000000 P100 : 9.000000 COUNT : 1 SUM : 9 ``` Pre-PR ``` rocksdb.file.read.verify.file.checksums.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` Reviewed By: ajkr Differential Revision: D49293378 Pulled By: hx235 fbshipit-source-id: 1acd8b828c28e088d0c5d63897f53cd180b82f42 |
|
|
akankshamahajan
|
1e2fd343bb |
Update upper_bound_offset when reseek changes iterate_upper_bound dynamically (#11775)
Summary: Update the logic in FilePrefetchBuffer to update `upper_bound_offset_` during reseek. During Reseek, `iterate_upper_bound` can be changed dynamically. So added an API to update that in FilePrefetchBuffer. Added unit test to confirm the behavior. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11775 Test Plan: - Check stress tests in case there is any failure after this diff. - make crash_test -j32 with auto_readahead_size=1 passed locally Reviewed By: anand1976 Differential Revision: D48815177 Pulled By: akankshamahajan15 fbshipit-source-id: 5f44fbb3af06c86a1c38f139c5fa4543891837f4 |
|
|
akankshamahajan
|
ed5b6c0d99 |
Avoid alignment in FilePrefetchBuffer during seek with async_io (#11793)
Summary: During Seek, the iterator seeks every file on L0. In async_io, it submit the requests to seek on every file on L0 asynchronously using RocksDB FilePrefetchBuffer. However, FilePrefetchBuffer does alignment and reads extra bytes then needed that can increase the throughput. In case of non direct io, the alignment can be avoided. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11793 Test Plan: - Added a unit test that fails without this PR. - make crash_test -j32 completed successfully Reviewed By: anand1976 Differential Revision: D48985051 Pulled By: akankshamahajan15 fbshipit-source-id: 2d130a9e7c3df9c4fcd0408406e6277ab75a4389 |
|
|
Changyu Bi
|
458acf8169 |
Add some unit tests when file read returns error during compaction/scanning (#11788)
Summary: Some repro unit tests for the bug fixed in https://github.com/facebook/rocksdb/pull/11782. Ran on main without https://github.com/facebook/rocksdb/pull/11782: ``` ./db_compaction_test --gtest_filter='*ErrorWhenReadFileHead' Note: Google Test filter = *ErrorWhenReadFileHead [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from DBCompactionTest [ RUN ] DBCompactionTest.ErrorWhenReadFileHead db/db_compaction_test.cc:10105: Failure Value of: s.IsIOError() Actual: false Expected: true [ FAILED ] DBCompactionTest.ErrorWhenReadFileHead (3960 ms) ./db_iterator_test --gtest_filter="*ErrorWhenReadFile*" Note: Google Test filter = *ErrorWhenReadFile* [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from DBIteratorTest [ RUN ] DBIteratorTest.ErrorWhenReadFile db/db_iterator_test.cc:3399: Failure Value of: (iter->status()).ok() Actual: true Expected: false [ FAILED ] DBIteratorTest.ErrorWhenReadFile (280 ms) [----------] 1 test from DBIteratorTest (280 ms total) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11788 Reviewed By: ajkr Differential Revision: D48940284 Pulled By: cbi42 fbshipit-source-id: 06f3c5963f576db3f85d305ffb2745ee13d209bb |
|
|
akankshamahajan
|
f36394ff20 |
Fix seg fault in auto_readahead_size with async_io (#11769)
Summary: Fix seg fault in auto_readahead_size with async_io when readahead_size = 0. If readahead_size is trimmed and is 0, it's not eligible for further prefetching and should return. Error occured when the first buffer already contains data and it goes for prefetching in second buffer leading to assertion failure - `assert(roundup_len1 >= alignment); ` because roundup_len1 = length + readahead_size. length is 0 and readahead_size is also 0. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11769 Test Plan: Reproducible with db_stress with async_io enabled. Reviewed By: anand1976 Differential Revision: D48743031 Pulled By: akankshamahajan15 fbshipit-source-id: 0e08c41f862f6287ca223fbfaf6cd42fc97b3c87 |
|
|
Hui Xiao
|
f53018c0c8 |
Improve PrefetchTest.Basic with explicit flush and file num variable (#11720)
Summary: **Context/Summary:** as title, should be harmless. And it's a guessed fix to https://github.com/facebook/rocksdb/issues/11717 while no repro has obtained on my end yet. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11720 Test Plan: existing tests Reviewed By: cbi42 Differential Revision: D48475661 Pulled By: hx235 fbshipit-source-id: 7c7390319f094c540e703fe2e78a8d601b7a894b |
|
|
akankshamahajan
|
f65a0379f0 |
Implement trimming of readhead size when upper bound is specified (#11684)
Summary: Implement trimming of readahead_size under a new option ReadOptions.auto_readahead_size. It'll trim the readahead_size during prefetching upto iterate_upper_bound offset only when ReadOptions.iterate_upper_bound is set, therefore reducing the prefetching of data beyond upper_bound. It's enabled for both implicit auto readahead size and when ReadOptions.readahead_size is specified and for sync and async_io. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11684 Test Plan: Added new unit test Reviewed By: anand1976 Differential Revision: D48479723 Pulled By: akankshamahajan15 fbshipit-source-id: 2b1703579caf779105e836b580866ffd7db076fc |
|
|
Changyu Bi
|
76ed9a3990 |
Add missing status check when compiling with `ASSERT_STATUS_CHECKED=1` (#11686)
Summary:
It seems the flag `-fno-elide-constructors` is incorrectly overwritten in Makefile by
|
|
|
Hui Xiao
|
9a034801ce |
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444)
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version:
|
|
|
Hui Xiao
|
09882a52d6 |
Prepare for deprecation of Options::access_hint_on_compaction_start (#11658)
Summary: **Context/Summary:** After https://github.com/facebook/rocksdb/pull/11631, file hint is not longer needed for compaction read. Therefore we can deprecate `Options::access_hint_on_compaction_start`. As this is a public API change, we should first mark the relevant APIs (including the Java's) deprecated and remove it in next major release 9.0. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11658 Test Plan: No code change Reviewed By: ajkr Differential Revision: D47997856 Pulled By: hx235 fbshipit-source-id: 16e015ae7728c224b1caef73143aa9915668f4ac |
|
|
Hui Xiao
|
629605d645 |
Move prefetching responsibility to page cache for compaction read under non directIO usecase (#11631)
Summary: **Context/Summary** As titled. The benefit of doing so is to explicitly call readahead() instead of relying page cache behavior for compaction read when we know that we most likely need readahead as compaction read is sequential read . **Test** Extended the existing UT to cover compaction read case Pull Request resolved: https://github.com/facebook/rocksdb/pull/11631 Reviewed By: ajkr Differential Revision: D47681437 Pulled By: hx235 fbshipit-source-id: 78792f64985c4dc44aa8f2a9c41ab3e8bbc0bc90 |
|
|
akankshamahajan
|
749b179c04 |
Remove reallocation of AlignedBuffer in direct_io sync reads if already aligned (#11600)
Summary: Remove reallocation of AlignedBuffer in direct_io sync reads in RandomAccessFileReader::Read if buffer passed is already aligned. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11600 Test Plan: Setup: `TEST_TMPDIR=./tmp-db/ ./db_bench -benchmarks=filluniquerandom -disable_auto_compactions=true -target_file_size_base=1048576 -write_buffer_size=1048576 -compression_type=none` Benchmark: `TEST_TMPDIR=./tmp-db/ perf record ./db_bench --cache_size=8388608 --use_existing_db=true --disable_auto_compactions=true --benchmarks=seekrandom --use_direct_reads=true -use_direct_io_for_flush_and_compaction=true -reads=1000 -seek_nexts=1 -max_auto_readahead_size=131072 -initial_auto_readahead_size=16384 -adaptive_readahead=true -num_file_reads_for_auto_readahead=0` Perf profile- Before: ``` 8.73% db_bench libc.so.6 [.] __memmove_evex_unaligned_erms 3.34% db_bench [kernel.vmlinux] [k] filemap_get_read_batch ``` After: ``` 2.50% db_bench [kernel.vmlinux] [k] filemap_get_read_batch 2.29% db_bench libc.so.6 [.] __memmove_evex_unaligned_erms ``` `make crash_test -j `with direct_io enabled completed succesfully locally. Ran few benchmarks with direct_io from seek_nexts varying between 912 to 327680 and different readahead_size parameters and it showed no regression so far. Reviewed By: ajkr Differential Revision: D47478598 Pulled By: akankshamahajan15 fbshipit-source-id: 6a48e21cb34696f5d09c22a6311a3a1cb5f9cf33 |
|
|
akankshamahajan
|
ff1cc8a63e |
Fix extra prefetching when num_file_reads_for_auto_readahead is 1 in async_io (#11560)
Summary: When num_file_reads_for_auto_readahead = 1, during seek, it would go for prefetchingextra data in second buffer along with seek data, that would lead to increase in read data and discarded bytes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11560 Test Plan: Added unit test Reviewed By: anand1976 Differential Revision: D47008102 Pulled By: akankshamahajan15 fbshipit-source-id: 566c6131cb5f968d5efb81fd0ab233ff7e534ab0 |