Summary:
1. Prevent a double join on a `port::Thread`
2. Ensure `recovery_in_prog_` and `bg_error_` are both set under same lock hold. This is useful for writers who see a non-OK `bg_error_` and are deciding whether to stall based on whether the error will be auto-recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11939
Reviewed By: cbi42
Differential Revision: D50155484
Pulled By: ajkr
fbshipit-source-id: fbc1f85c50e7eaee27ee0e376aee688d8a06c93b
Summary:
cbi42 pointed out a race condition in which `recovery_io_error_` and `recovery_error_` could be updated inconsistently due to releasing the DB mutex in `EventHelpers::NotifyOnBackgroundError()`. There doesn't seem to be a point to having two status objects, so this PR consolidates them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11937
Reviewed By: cbi42
Differential Revision: D50105793
Pulled By: ajkr
fbshipit-source-id: 3de95baccfa44351a49a5c2aa0986c9bc81baa8f
Summary:
Relaxed the constraints for blocking when writes are stopped. When a recovery is already being attempted, we might as well let `!no_slowdown` writes wait on it in case it succeeds. This makes the user-visible behavior consistent across recovery flush and non-recovery flush.
This enables `db_stress` to inject retryable (soft) flush read errors without having to handle user write failures. I changed `db_stress` a bit to permit injected errors in much more foreground operations as more admin operations (like `GetLiveFiles()`) can fail on a retryable error during flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11879
Reviewed By: anand1976
Differential Revision: D49571196
Pulled By: ajkr
fbshipit-source-id: 5d516d6faf20d2c6bfe0594ab4f2706bca6d69b0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11930
The patch cleans up and refactors the logic in/around `WriteBatchWithIndexInternal` a bit as groundwork for further changes. Specifically, the class is turned back into a stateless collection of static helpers (which is the way it was before PR 6851). Note that there were two apparent reasons for introducing this instance state in PR 6851: a) encapsulating `MergeContext` and b) resolving objects like `Logger` and `Statistics` based on a variety of handles. However, neither reason seems justified at this point. Regarding a), the `MultiGetFromBatchAndDB` logic passes in its own `MergeContext` objects via a second set of methods that do not use the member `MergeContext`. As for b), `Logger` and friends are only needed for Merge, which is only supported if a column family handle is provided; in turn, the column family handle enables us to resolve all the necessary objects without the need for any other handles like `DB` or `DBOptions`. In addition to the above, the patch changes the type of `BaseDeltaIterator::merge_result_` to `std::string` from `PinnableSlice` (since no pinning is ever done) and makes some other small code quality improvements.
Reviewed By: jaykorean
Differential Revision: D50038302
fbshipit-source-id: 5f34abe2e808bdaea0f3a8033b5764ebd446b85d
Summary:
This change has two primary goals (follow-up to https://github.com/facebook/rocksdb/issues/11917, https://github.com/facebook/rocksdb/issues/11920):
* Ensure the DB seqno_to_time_mapping has entries that allow us to put a good time lower bound on any writes that happen after setting up preserve/preclude options (either in a new DB, new CF, SetOptions, etc.) and haven't yet aged out of that time window. This allows us to remove a bunch of work-arounds in tests.
* For new DBs using preserve/preclude options, automatically reserve some sequence numbers and pre-map them to cover the time span back to the preserve/preclude cut-off time. In the future, this will allow us to import data from another DB by key, value, and write time by assigning an appropriate seqno in this DB for that write time.
Note that the pre-population (historical mappings) does not happen if the original options at DB Open time do not have preserve/preclude, so it is recommended to create initial column families at that time with create_missing_column_families, to take advantage of this (future) feature. (Adding these historical mappings after DB Open would risk non-monotonic seqno_to_time_mapping, which is dubious if not dangerous.)
Recommended follow-up:
* Solve existing race conditions (not memory safety) where parallel operations like CreateColumnFamily or SetDBOptions could leave the wrong setting in effect.
* Make SeqnoToTimeMapping more gracefully handle a possible case in which too many mappings are added for the time range of concern. It seems like there could be cases where data is massively excluded from the cold tier because of entries falling off the front of the mapping list (causing GetProximalSeqnoBeforeTime() to return 0). (More investigation needed.)
No release note for the minor bug fix because this is still an experimental feature with limited usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11922
Test Plan: tests added / updated
Reviewed By: jowlyzhang
Differential Revision: D49956563
Pulled By: pdillinger
fbshipit-source-id: 92beb918c3a298fae9ca8e509717b1067caa1519
Summary:
In preparing some seqno_to_time_mapping improvements, I found that some of the wrap-up work for creating column families was unnecessarily repeated in the case of DB::Open with create_missing_column_families. This change fixes that (`CreateColumnFamily()` -> `CreateColumnFamilyImpl()` in `DBImpl::Open()`), motivated by avoiding repeated calls to `RegisterRecordSeqnoTimeWorker()` but with the side benefit of avoiding repeated calls to `WriteOptionsFile()` for each CF.
Also in this change:
* Add a `Status::UpdateIfOk()` function for combining statuses in a common pattern
* Rename `max_time_duration` -> `min_preserve_seconds` (include units as much as possible)
* Improved comments in several places
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11920
Test Plan: tests added / updated
Reviewed By: jaykorean
Differential Revision: D49919147
Pulled By: pdillinger
fbshipit-source-id: 3d0318c1d070c842c5331da0a5b415caedc104f1
Summary:
1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.`
**Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator.
2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset`
**Fix** - Remove prefetch_buffer to be used when uncompressed dict is read.
3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed.
Received signal 6 (Aborted)
Invoking GDB for stack trace...
db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed`
**Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884
Test Plan: Ran various flavors of crash tests locally for the whole duration
Reviewed By: anand1976
Differential Revision: D49834201
Pulled By: akankshamahajan15
fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
Summary:
Since allowing 24hr peak by setting start_time = end_time is not so intuitive, we are not going to allow it (e.g. `00:00-00:00` doesn't looks like a value that would cover 24hr.). Instead, we are going to compare at minute level (i.e. dropping the seconds to the nearest minute) so that `00:00-23:59` will cover 24hrs. The entire minute from 23:59:00 23:59:59 will be covered with this change.
Minor fixes from previous PR
- release build error
- fixed random seed in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11911
Test Plan:
`DBOptionsTest::OffPeakTimes`
`make -j64 static_lib` to test release build issue that was fixed
Reviewed By: pdillinger
Differential Revision: D49787795
Pulled By: jaykorean
fbshipit-source-id: e8d045b95f54f61d5dd5f1bb473579f8d55c18b3
Summary:
Recovery triggers flushes for very different scenarios:
(1) `FlushReason::kErrorRecoveryRetryFlush`: a flush failed
(2) `FlushReason::kErrorRecovery`: a WAL may be corrupted
(3) `FlushReason::kCatchUpAfterErrorRecovery`: immutable memtables may have accumulated
The old code called called `FlushAllColumnFamilies()` in all cases, which uses manual flush functions: `AtomicFlushMemTables()` and `FlushMemTable()`. Forcing flushing the latest data on all CFs was useful for (2) because it ensures all CFs move past the corrupted WAL.
However, those code paths were overkill for (1) and (3), where only already-immutable memtables need to be flushed. There were conditionals to exclude some of the extraneous logic but I found there was still too much happening. For example, both of the manual flush functions enter the write thread. Entering the write thread is inconvenient because then we can't allow stalled writes to wait on a retrying flush to finish.
Instead of continuing down the path of adding more conditionals to the manual flush functions, this PR introduces a dedicated function for cases (1) and (3): `RetryFlushesForErrorRecovery()`. Also I cleaned up the manual flush functions to remove existing conditionals for these cases as they're no longer needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11903
Reviewed By: cbi42
Differential Revision: D49693812
Pulled By: ajkr
fbshipit-source-id: 7630ac539b9d6c92052c13a3cdce53256134d990
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11913
The `max_successive_merges` logic currently does not handle wide-column base values correctly, since it uses the `Get` API, which only returns the value of the default column. The patch fixes this by switching to `GetEntity` and passing all columns (if applicable) to the merge operator.
Reviewed By: jaykorean
Differential Revision: D49795097
fbshipit-source-id: 75eb7cc9476226255062cdb3d43ab6bd1cc2faa3
Summary:
After https://github.com/facebook/rocksdb/issues/11905, I am preparing a DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping. **Intended follow-up**
However, there are a number of test changes I want to make prior to that to make it clear that I am not regressing the tests and production behavior at the same time.
* Start mock time in the tests well beyond epoch (time 0) so that we aren't normally reaching into pre-history for current time minus the preserve/preclude duration.
* Majorly clean up BasicSeqnoToTimeMapping to avoid confusing hard-coded bounds on GetProximalTimeBeforeSeqno() results.
* There is an unresolved/unexplained issue marked with FIXME that should be investigated when GetProximalTimeBeforeSeqno() is put into production.
* MultiCFs test was strangely generating 5 L0 files, four of which would be compacted into an L1, and then letting TTL compaction compact 1@L0+1@L1. Changing the starting time of the tests seemed to mess up the TTL compaction. But I suspect the TTL compaction was unintentional, so I've cut it down to just 4 L0 files, which compacts predictably.
* Unrelated: allow ROCKSDB_NO_STACK=1 to skip printing a stack trace on assertion failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11917
Test Plan: no changes to production code
Reviewed By: jowlyzhang
Differential Revision: D49841436
Pulled By: pdillinger
fbshipit-source-id: 753348ace9c548e82bcb77fcc8b2ffb7a6beeb0a
Summary:
Missed `GetFileSize()` forwarding , this PR fix this issue, and mark `WritableFile::GetFileSize()` as pure virtual to detect such issue in compile time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11726
Reviewed By: ajkr
Differential Revision: D49791240
Pulled By: jowlyzhang
fbshipit-source-id: ef219508d6b15c9a24df9b706a9fdc33cc6a286e
Summary:
RocksDB's primary function is to facilitate read and write operations. Compactions, while essential for minimizing read amplifications and optimizing storage, can sometimes compete with these primary tasks. Especially during periods of high read/write traffic, it's vital to ensure that primary operations receive priority, avoiding any potential disruptions or slowdowns. Conversely, during off-peak times when traffic is minimal, it's an opportune moment to tackle low-priority tasks like TTL based compactions, optimizing resource usage.
In this PR, we are incorporating the concept of off-peak time into RocksDB by introducing `daily_offpeak_time_utc` within the DBOptions. This setting is formatted as "HH:mm-HH:mm" where the first one before "-" is the start time and the second one is the end time, inclusive. It will be later used for resource optimization in subsequent PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11893
Test Plan:
- New Unit Test Added - `DBOptionsTest::OffPeakTimes`
- Existing Unit Test Updated - `OptionsTest`, `OptionsSettableTest`
Reviewed By: pdillinger
Differential Revision: D49714553
Pulled By: jaykorean
fbshipit-source-id: fef51ea7c0fede6431c715bff116ddbb567c8752
Summary:
This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up**
However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping.
Functional fixes / changes:
* This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc
* That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.)
* Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function.
* Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples.
Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work.
An apparent compaction bug is revealed in
PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909
Cosmetic / code safety things (not exhaustive):
* Fix some confusing names.
* `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name.
* Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing.
* Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions.
* Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind.
* (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.)
* A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`).
* Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905
Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others.
Reviewed By: jowlyzhang
Differential Revision: D49755592
Pulled By: pdillinger
fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11896
The patch extends the test coverage of the wide column aware merge logic by adding two new tests that perform general transformations during merge by implementing the `FullMergeV3` interface. The first one uses a merge operator that produces a wide-column entity as result in all cases (i.e. even if the base value is a plain key-value, or if there is no base value). The second one uses a merge operator that results in a plain key-value in all cases.
Reviewed By: jaykorean
Differential Revision: D49665946
fbshipit-source-id: 419b9e557c064525b659685eb8c09ae446656439
Summary:
Make the `RecoverFromRetryableBGIOError` function always mark `recovery_in_prog_` to false when it returns.
Otherwise, in below code snippet, when db closes and the `error_handler_.CancelErrorRecovery()` call successfully joined the recovery thread, the immediately following while loop will incorrectly think the error recovery is still in progress and loops in `bg_cv_.Wait()`.
1c871a4d86/db/db_impl/db_impl.cc (L542-L545)
This is the issue https://github.com/facebook/rocksdb/issues/11440
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11890
Reviewed By: anand1976
Differential Revision: D49624216
Pulled By: jowlyzhang
fbshipit-source-id: ee10cf6527d95b8dd4705a326eb6208d741fe002
Summary:
https://github.com/facebook/rocksdb/issues/11872 causes a unit test to start failing with the error message below. The cause is that the additional call to `FlushAllColumnFamilies()` in `DBImpl::ResumeImpl()` can run while DB is closing. More detailed explanation: there are two places where we call `ResumeImpl()`:
1. in `ErrorHandler::RecoverFromBGError`, for manual resume or recovery from errors like OutOfSpace through sst file manager, and
2. in `Errorhandler::RecoverFromRetryableBGIOError`, for error recovery from errors like flush failure due to retryable IOError. This is tracked by `ErrorHandler::recovery_thread_`.
Here is how DB close waits for error recovery: 49da91ec09/db/db_impl/db_impl.cc (L540-L543)
`CancelErrorRecovery()` waits until `recovery_thread_` finishes and `IsRecoveryInProgress()` checks the `recovery_in_prog_` flag. The additional call to `FlushAllColumnFamilies()` in `ResumeImpl()` happens after it clears bg error and the `recovery_in_prog_` flag: 49da91ec09/db/db_impl/db_impl.cc (L436-L463). So if `ResumeImpl()` is called in `RecoverFromBGError()`, we can have a thread running `FlushAllColumnFamilies()` while DB is closing and thought that recovery is done.
The fix is to only do the additional call to `FlushAllColumnFamilies()` when doing error recovery through `Errorhandler::RecoverFromRetryableBGIOError` by setting flags in `DBRecoverContext`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11880
Test Plan:
`gtest-parallel --repeat=100 --workers=4 ./error_handler_fs_test --gtest_filter="*AutoRecoverFlushError*"` reproduces the error pretty reliably.
```[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBErrorHandlingFSTest
[ RUN ] DBErrorHandlingFSTest.AutoRecoverFlushError
error_handler_fs_test: db/column_family.cc:1618: rocksdb::ColumnFamilySet::~ColumnFamilySet(): Assertion `last_ref' failed.
Received signal 6 (Aborted)
...
https://github.com/facebook/rocksdb/issues/10 0x00007fac4409efd6 in __GI___assert_fail (assertion=0x7fac452c0afa "last_ref", file=0x7fac452c9fb5 "db/column_family.cc", line=1618, function=0x7fac452cb950 "rocksdb::ColumnFamilySet::~ColumnFamilySet()") at assert.c:101
101 in assert.c
https://github.com/facebook/rocksdb/issues/11 0x00007fac44b5324f in rocksdb::ColumnFamilySet::~ColumnFamilySet (this=0x7b5400000000) at db/column_family.cc:1618
1618 assert(last_ref);
https://github.com/facebook/rocksdb/issues/12 0x00007fac44e0f047 in std::default_delete<rocksdb::ColumnFamilySet>::operator() (this=0x7b5800000940, __ptr=0x7b5400000000) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/13 std::__uniq_ptr_impl<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/14 std::unique_ptr<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/15 rocksdb::VersionSet::~VersionSet (this=this@entry=0x7b5800000900) at db/version_set.cc:5081
5081 column_family_set_.reset();
https://github.com/facebook/rocksdb/issues/16 0x00007fac44e0f97a in rocksdb::VersionSet::~VersionSet (this=0x7b5800000900) at db/version_set.cc:5078
5078 VersionSet::~VersionSet() {
https://github.com/facebook/rocksdb/issues/17 0x00007fac44bf0b2f in std::default_delete<rocksdb::VersionSet>::operator() (this=0x7b8c00000068, __ptr=0x7b5800000900) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/18 std::__uniq_ptr_impl<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/19 std::unique_ptr<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/20 rocksdb::DBImpl::CloseHelper (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:676
676 versions_.reset();
https://github.com/facebook/rocksdb/issues/21 0x00007fac44bf1346 in rocksdb::DBImpl::CloseImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:720
720 Status DBImpl::CloseImpl() { return CloseHelper(); }
https://github.com/facebook/rocksdb/issues/22 rocksdb::DBImpl::~DBImpl (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:738
738 closing_status_ = CloseImpl();
https://github.com/facebook/rocksdb/issues/23 0x00007fac44bf2bba in rocksdb::DBImpl::~DBImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:722
722 DBImpl::~DBImpl() {
https://github.com/facebook/rocksdb/issues/24 0x00007fac455444d4 in rocksdb::DBTestBase::Close (this=this@entry=0x7b6c00000000) at db/db_test_util.cc:678
678 delete db_;
https://github.com/facebook/rocksdb/issues/25 0x00007fac455455fb in rocksdb::DBTestBase::TryReopen (this=this@entry=0x7b6c00000000, options=...) at db/db_test_util.cc:707
707 Close();
https://github.com/facebook/rocksdb/issues/26 0x00007fac45543459 in rocksdb::DBTestBase::Reopen (this=0x7ffed74b79a0, options=...) at db/db_test_util.cc:670
670 ASSERT_OK(TryReopen(options));
https://github.com/facebook/rocksdb/issues/27 0x00000000004f2522 in rocksdb::DBErrorHandlingFSTest_AutoRecoverFlushError_Test::TestBody (this=this@entry=0x7b6c00000000) at db/error_handler_fs_test.cc:1224
1224 Reopen(options);
```
Reviewed By: jowlyzhang
Differential Revision: D49579701
Pulled By: cbi42
fbshipit-source-id: 3fc8325e6dde7e7faa8bcad95060cb4e26eda638
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable: 269478ee46/db/db_impl/db_impl_compaction_flush.cc (L725) This prevents any future flush to pick old memtables.
A more detailed repro is in unit test.
This PR fixes this issue by
1. Ensure we rollback memtables if an atomic flush fails due to background error
2. When there is a background error, abort atomic flushes that are waiting for older memtables to be installed
3. Do not schedule non-recovery flushes when there is a background error that stops background work
There was another issue with atomic_flush=true where DB can hang during DB close, see more in #11867. The fix in this PR, specifically fix 2 above, should be enough to resolve it too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11872
Test Plan: new unit test.
Reviewed By: jowlyzhang
Differential Revision: D49556867
Pulled By: cbi42
fbshipit-source-id: 4a0210ff28a8552a99ece7fbb0f574fd24b4da3f
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11870
Having a large number of merge operands applied at query time can have a significant effect on performance; therefore, applications might want limit the number of deltas for any given key. However, there is currently no way to establish the number of operands for certain types of queries. The ticker `READ_NUM_MERGE_OPERANDS` only provides aggregate (not per-read) information. The `PerfContext` counters `internal_merge_count` and `internal_merge_point_lookup_count` can be used to get this information on a per-query basis for iterators and single point lookups; however, there is no per-key breakdown for `MultiGet` type APIs. The patch addresses this issue by introducing a special kind of OK status which signals that an application-defined threshold on the number of merge operands has been exceeded for a given key. The threshold can be specified on a per-query basis using a new field in `ReadOptions`.
Reviewed By: jaykorean
Differential Revision: D49522786
fbshipit-source-id: 4265b3848d1be5ff313a3e8fb604ddf56411dd2c
Summary:
This PR implements support for a three tier cache - primary block cache, compressed secondary cache, and a nvm (local flash) secondary cache. This allows more effective utilization of the nvm cache, and minimizes the number of reads from local flash by caching compressed blocks in the compressed secondary cache.
The basic design is as follows -
1. A new secondary cache implementation, ```TieredSecondaryCache```, is introduced. It keeps the compressed and nvm secondary caches and manages the movement of blocks between them and the primary block cache. To setup a three tier cache, we allocate a ```CacheWithSecondaryAdapter```, with a ```TieredSecondaryCache``` instance as the secondary cache.
2. The table reader passes both the uncompressed and compressed block to ```FullTypedCacheInterface::InsertFull```, allowing the block cache to optionally store the compressed block.
3. When there's a miss, the block object is constructed and inserted in the primary cache, and the compressed block is inserted into the nvm cache by calling ```InsertSaved```. This avoids the overhead of recompressing the block, as well as avoiding putting more memory pressure on the compressed secondary cache.
4. When there's a hit in the nvm cache, we attempt to insert the block in the compressed secondary cache and the primary cache, subject to the admission policy of those caches (i.e admit on second access). Blocks/items evicted from any tier are simply discarded.
We can easily implement additional admission policies if desired.
Todo (In a subsequent PR):
1. Add to db_bench and run benchmarks
2. Add to db_stress
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11812
Reviewed By: pdillinger
Differential Revision: D49461842
Pulled By: anand1976
fbshipit-source-id: b40ac1330ef7cd8c12efa0a3ca75128e602e3a0b
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status: f42e70bf56/db/db_impl/db_impl_compaction_flush.cc (L3161)
This PR fixes the issue by rollback these pending flushes.
There is another issue where if a new flush for new memtable starts and finishes after Flush0 finishes. Its output may also be deleted (see more in unit test). It is fixed by checking bg error status before installing a memtable result, and rollback if there is an error.
There is a more efficient fix where we just don't release the pending file output number for flushes that delegate installation. It is more efficient since it does not have to rewrite the flush output file. With the fix in this PR, we can end up with a giant file if a lot of memtables are being flushed together. However, the more efficient fix is a bit more complicated to implement (requires associating such pending file numbers with flush job/memtables) and is more risky since it changes normal flush code path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11865
Test Plan: * Added repro unit tests.
Reviewed By: anand1976
Differential Revision: D49484922
Pulled By: cbi42
fbshipit-source-id: 25b536c08f4e02e7f1d0f86571663737d2b5d53d
Summary:
To fix off-by-one error: Transaction could not check for conflicts for operation at SequenceNumber 500000 as the MemTable only contains changes newer than SequenceNumber 500001.
Fixes https://github.com/facebook/rocksdb/issues/11822
I think introduced in a657ee9a9c
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11861
Reviewed By: pdillinger
Differential Revision: D49457273
Pulled By: ajkr
fbshipit-source-id: b527cbae4ecc7874633a11f07027adee62940d74
Summary:
**Context:**
As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`.
**Summary:**
This PR contains two commits:
(1) [Refactory](0012777f0e) to make resonating/using what is in `Compaction:: table_properties_` easier
- Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_`
- Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties`
- Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other
(2) [Expose more info about input files:](6093e7dfba) `CompactionFilter::Context::input_start_level/input_table_properties`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857
Test Plan:
- Modify existing UT `
TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics
Reviewed By: ajkr
Differential Revision: D49402540
Pulled By: hx235
fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
Summary:
**Summary:**
When row cache hits and a timestamp is being set in read_options, even though ROW_CACHE entry is hit, the return status is kNotFound.
**Cause of error:**
If timestamp is provided in readoptions, a callback for sequence number checking is registered [here](8fc78a3a9e/db/db_impl/db_impl.cc (L2112)).
Hence the default value set at this [line](694e49cbb1/table/get_context.cc (L611)) prevents get_context from saving value found in cache. Causing the final status to be kNotFound even though the entry exist in both cache and SST file.
**Proposed Solution**
Row cache key contains a sequence number in it. If the key for row cache lookup matches the key in cache, this cache entry should be good to be exposed to user and hence we reuse the sequence number in cache key rather than passing kMaxSequenceNumber.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11816
Reviewed By: ajkr
Differential Revision: D49419029
Pulled By: jowlyzhang
fbshipit-source-id: 6c77e9e751628d7d8e6c389f299e29a11ea824c6
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11858
The patch builds on https://github.com/facebook/rocksdb/pull/11807 and integrates the `FullMergeV3` API into the read and compaction code paths by updating and extending the logic in `MergeHelper`.
In particular, when it comes to merge inputs, the existing `TimedFullMergeWithEntity` is folded into `TimedFullMerge`, since wide-column base values are now handled the same way as plain base values (or no base values for that matter), e.g. they are passed directly to the `MergeOperator`. On the other hand, there is some new differentiation on the output side. Namely, there are now two sets of `TimedFullMerge` variants: one set for contexts where the complete merge result and its value type are needed (used by iterators and compactions), and another set where the merge result is needed in a form determined by the client (used by the point lookup APIs, where e.g. for `Get` we have to extract the value of the default column of any wide-column results).
Implementation-wise, the two sets of overloads use different visitors to process the `std::variant` produced by `FullMergeV3`. This has the benefit of eliminating some repeated code e.g. in the point lookup paths, since `TimedFullMerge` now populates the application's result object (`PinnableSlice`/`string` or `PinnableWideColumns`) directly. Moreover, within each set of variants, there is a separate overload for the no base value/plain base value/wide-column base value cases, which eliminates some repeated branching w/r/t to the type of the base value if any.
Reviewed By: jaykorean
Differential Revision: D49352562
fbshipit-source-id: c2fb9853dba3fbbc6918665bde4195c4ea150a0c
Summary:
Fixes https://github.com/facebook/rocksdb/issues/10257 (also see [here](https://github.com/facebook/rocksdb/pull/10355#issuecomment-1684308556)) by releasing compaction files earlier when writing to manifest in LogAndApply(). This is done by passing in a [callback](ba59751430/db/version_set.h (L1199)) to LogAndApply(). The new Version is created in the same critical section where compaction files are released. When compaction picker is picking compaction based on the new version, these compaction files will already be released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11764
Test Plan:
* Existing unit tests
* A repro unit test to validate that compaction files are released: `./db_compaction_test --gtest_filter=DBCompactionTest.ReleaseCompactionDuringManifestWrite`
* `python3 ./tools/db_crashtest.py --simple whitebox` with some assertions to check compaction files are released
Reviewed By: ajkr
Differential Revision: D48742152
Pulled By: cbi42
fbshipit-source-id: 7560fd0e723a63fe692234015d2b96850f8b5d77
Summary:
When skip_memtable is true in MultiGetImpl, The lookup_current is always false, Causes data to be unable to be queried in super_version->current。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11700
Reviewed By: anand1976
Differential Revision: D49342877
Pulled By: jowlyzhang
fbshipit-source-id: 270a36d049b4cb7fd151a1fa3080300310111271
Summary:
An internal user wants to be able to dynamically switch between Bloom and Ribbon filters, without a custom FilterPolicy. Making `filter_policy` mutable would actually make issue https://github.com/facebook/rocksdb/issues/10079 worse, because it would be a race on a pointer field, not just on scalars.
As a reasonable compromise until that is fixed, I am enabling dynamic control over Bloom vs. Ribbon choice by making
RibbonFilterPolicy::bloom_before_level mutable, and doing that safely by using an atomic.
I've also slightly tweaked the interpretation of that field so that setting it to INT_MAX really means "always Bloom."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11838
Test Plan: unit tests added/extended. crash test updated for SetOptions call and tested under TSAN with amplified probability (lower set_options_one_in).
Reviewed By: ajkr
Differential Revision: D49296284
Pulled By: pdillinger
fbshipit-source-id: e4251c077510df9a9c719876f482448c0d15402a
Summary:
- As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`.
## Minor Refactor
- Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`.
- I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842
Test Plan:
- Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing.
```
python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
```
Reviewed By: ltamasi
Differential Revision: D49329575
Pulled By: jaykorean
fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
Summary:
This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically.
The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`.
This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594
Test Plan:
* New unit tests.
* Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case.
TODO in a following PR:
* Stress test Iterator::Refresh() to different snapshots or no snapshot.
Reviewed By: ajkr
Differential Revision: D48456896
Pulled By: cbi42
fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
Summary:
When `MultiGet` acquires `SuperVersion` via locking the db mutex and get the current `ColumnFamilyData::super_version_`, its corresponding cleanup logic is not correctly done.
It's currently doing this:
`MultiGetColumnFamilyData::cfd->GetSuperVersion().Unref()`
This operates on the most recent `SuperVersion` without locking db mutex , which is not thread safe by itself. And this unref operation is intended for the originally acquired `SuperVersion` instead of the current one. Because a race condition could happen where a new `SuperVersion` is installed in between this `MultiGet`'s ref and unref. When this race condition does happen, it's not sufficient to just unref the `SuperVersion`, `DBImpl::CleanupSuperVersion` should be called instead to properly clean up the `SuperVersion` had this `MultiGet` call be its last reference holder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11830
Test Plan:
`make all check`
Added a unit test that would originally fail
Reviewed By: ltamasi
Differential Revision: D49287715
Pulled By: jowlyzhang
fbshipit-source-id: 8353636ee11b2e90d85c677a96a92360072644b0
Summary:
`GetEntity` API support for ReadOnly DB and Secondary DB.
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`)
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity`
- `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally.
- `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()`
- Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`.
- Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799
Test Plan:
**Unit Tests**
- Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup.
- Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()`
- `make -j64 check`
**Crash Tests**
- `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
- `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 `
- `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
Reviewed By: ltamasi
Differential Revision: D49037040
Pulled By: jaykorean
fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b
Summary:
When executing ClipColumnFamily, if end_key is equal to largest_user_key in a file, this key will not be deleted. So we need to change less than to less than or equal to
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11811
Reviewed By: ajkr
Differential Revision: D49206936
Pulled By: cbi42
fbshipit-source-id: 3e8bcb7b52040a9b4d1176de727616cc298d3445
Summary:
`last_stats_dump_time_microsec_` is not used after initialization.
I guess that it was previously used to implement periodically dumping stats,
but this functionality has now been delegated to the `PeriodicTaskScheduler`.
4b79e8c003/db/db_impl/db_impl.cc (L770-L778)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11824
Reviewed By: cbi42
Differential Revision: D49278311
Pulled By: jowlyzhang
fbshipit-source-id: 5856245580afc026e6b490755a45c5436a2375c9
Summary:
As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion.
There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784
Test Plan:
`make all check`
// Checks success scenario really provide the read consistency attribute as mentioned above.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*`
// Checks failure scenario cleans up SuperVersion properly.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*`
Reviewed By: ltamasi
Differential Revision: D48894795
Pulled By: jowlyzhang
fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6
Summary:
**Context/Summary:**
A size amp compaction can select and prevent a large number of L0 files from being selected by other compaction. If such compaction is running long or being queued behind, these L0 files will exist for long. With a few more flushes, we can run into write stop triggered by # L0 files. We've seen this happen on a host with many DBs sharing same thread pool, each of these DBs submits a size amp compaction with (110-180)+ files to the pool upon reopen and with a few more flushes, they hit the 200 L0 write stop condition.
The idea is to exclude some L0 input files in size amp compaction that are harmless to size amp reduction but improve the situation described above.
The exclusion algorithm is in `MightExcludeNewL0sToReduceWriteStop()` with two elements:
1. #L0 to exclude + (level0_stop_writes_trigger - num_l0_input_pre_exclusion) should be in the range of [min_merge_width, max_merge_width].
- This is to ensure we are excluding enough L0 input files but not too many to be qualified to picked for another compaction along with the incoming future L0 files before write stop.
2. Based on (1), further constrain #L0 to exclude based on the post-exclusion compaction score. The goal is to ensure our exclusion will not disqualify the size amp compaction from being a size amp compaction after exclusion.
**Tets plan:** New unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11749
Reviewed By: ajkr
Differential Revision: D48850631
Pulled By: hx235
fbshipit-source-id: 2c321036e164087c36319dd5645cbbf6b6152092
Summary:
Existing compaction statistics are `COMPACTION_TIME` and `COMPACTION_CPU_TIME` which are histogram and are logged at the end of a compaction. The new statistics `COMPACTION_CPU_TOTAL_TIME` is for cumulative total compaction time which is updated regularly during a compaction. This allows user to more closely track compaction cpu usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11741
Test Plan: * new unit test `DBTestWithParam.CompactionTotalTimeTest`
Reviewed By: ajkr
Differential Revision: D48608094
Pulled By: cbi42
fbshipit-source-id: b597109f3e4bf2237fb5a216b6fd036e5363b4c0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11823
Similarly to https://github.com/facebook/rocksdb/pull/11813, the patch is a small refactoring that eliminates some copy-paste around sorting the columns of entities by column name.
Reviewed By: jaykorean
Differential Revision: D49195504
fbshipit-source-id: d48c9f290e3203f838cc5949856c469ecf730008
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11807
For now, RocksDB has limited support for using merge with wide columns: when a bunch of merge operands have to be applied to a wide-column base value, RocksDB currently passes only the value of the default column to the application's `MergeOperator`, which means there is no way to update any other columns during a merge. As a first step in making this more general, the patch adds a new API `FullMergeV3` to `MergeOperator`.
`FullMergeV3`'s interface enables applications to receive a plain, wide-column, or non-existent base value as merge input, and to produce a new plain value, a new wide-column value, or an existing operand as merge output. Note that there are no limitations on the column names and values if the merge result is a wide-column entity. Also, the interface is general in the sense that it makes it possible e.g. for a merge that takes a plain base value and some deltas to produce a wide-column entity as a result.
For backward compatibility, the default implementation of `FullMergeV3` falls back to `FullMergeV2` and implements the current logic where merge operands are applied to the default column of the base entity and any other columns are unchanged. (Note that with `FullMergeV3` in the `MergeOperator` interface, this behavior will become customizable.)
This patch just introduces the new API and the default backward compatible implementation. I plan to integrate `FullMergeV3` into the query and compaction logic in subsequent diffs.
Reviewed By: jaykorean
Differential Revision: D49117253
fbshipit-source-id: 109e016f25cd130fc504790818d927bae7fec6bd
Summary:
Tests a scenario where range tombstone reseek used to cause MergingIterator to discard non-ok status.
Ran on main without https://github.com/facebook/rocksdb/issues/11786:
```
./db_range_del_test --gtest_filter="*RangeDelReseekAfterFileReadError*"
Note: Google Test filter = *RangeDelReseekAfterFileReadError*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBRangeDelTest
[ RUN ] DBRangeDelTest.RangeDelReseekAfterFileReadError
db/db_range_del_test.cc:3577: Failure
Value of: iter->Valid()
Actual: true
Expected: false
[ FAILED ] DBRangeDelTest.RangeDelReseekAfterFileReadError (64 ms)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11790
Reviewed By: ajkr
Differential Revision: D48972869
Pulled By: cbi42
fbshipit-source-id: b1a71867533b0fb60af86f8ce8a9e391ba84dd57
