Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
Sometimes, users might make mistake of not releasing snapshots before closing the DB. This is undocumented use of RocksDB and the behavior is unknown. We return DB::Close() to provide a way to check it for the users. Aborted() will be returned to users when they call DB::Close().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5272
Differential Revision: D15159713
Pulled By: siying
fbshipit-source-id: 39369def612398d9f239d83d396b5a28e5af65cd
Summary:
Currently one thread in RocksDB keeps a WAL file open while another thread
deletes it. Although the first thread never writes to the WAL again, it still
tries to close it in the end. This is fine on POSIX, but can be problematic on
other platforms, e.g. HDFS, etc.. It will either cause a lot of warning messages or
throw exceptions. The solution is to let the second thread close the WAL before deleting it.
RocksDB keeps the writers of the logs to delete in `logs_to_free_`, which is passed to `job_context` during `FindObsoleteFiles` (holding mutex). Then in `PurgeObsoleteFiles` (without mutex), these writers should close the logs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5233
Differential Revision: D15032670
Pulled By: riversand963
fbshipit-source-id: c55e8a612db8cc2306644001a5e6d53842a8f754
Summary: PR https://github.com/facebook/rocksdb/pull/4899 implemented the general framework for RocksDB secondary instances. This PR adds the support for WAL tailing in `OpenAsSecondary`, which means after the `OpenAsSecondary` call, the secondary is now able to see primary's writes that are yet to be flushed. The secondary can see primary's writes in the WAL up to the moment of `OpenAsSecondary` call starts.
Differential Revision: D15059905
Pulled By: miasantreble
fbshipit-source-id: 44f71f548a30b38179a7940165e138f622de1f10
Summary:
Found this when test driving the new MultiGet. If you pass unsorted result with sorted_result = false you'll trigger the ASSERT incorrect even though we'll sort down below.
I've also added simple test cover sorted_result=true/false scenario copied from MultiGetSimple.
anand1976
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5195
Differential Revision: D14935475
Pulled By: yizhang82
fbshipit-source-id: 1d2af5e3a003847d965066a16e3b19da68acf170
Summary:
When ReadOption doesn't specify a snapshot, WritePrepared::Get used kMaxSequenceNumber to avoid the cost of creating a new snapshot object (that requires sync over db_mutex). This creates a race condition if it is reading from the writes of a transaction that had duplicate keys: each instance of duplicate key is inserted with a different sequence number and depending on the ordering the ::Get might skip the newer one and read the older one that is obsolete.
The patch fixes that by using last published seq as the snapshot sequence number. It also adds a check after the read is done to ensure that the max_evicted_seq has not advanced the aforementioned seq, which is a very unlikely event. If it did, then the read is not valid since the seq is not backed by an actually snapshot to let IsInSnapshot handle that properly when an overlapping commit is evicted from commit cache.
A unit test is added to reproduce the race condition with duplicate keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5147
Differential Revision: D14758815
Pulled By: maysamyabandeh
fbshipit-source-id: a56915657132cf6ba5e3f5ea1b5d78c803407719
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
Expose DB methods to lock and unlock the WAL.
These methods are intended to use by MyRocks in order to obtain WAL
coordinates in consistent way.
Usage scenario is following:
MySQL has performance_schema.log_status which provides information that
enables a backup tool to copy the required log files without locking for
the duration of copy. To populate this table MySQL does following:
1. Lock the binary log. Transactions are not allowed to commit now
2. Save the binary log coordinates
3. Walk through the storage engines and lock writes on each engine. For
InnoDB, redo log is locked. For MyRocks, WAL should be locked.
4. Ask storage engines for their coordinates. InnoDB reports its current
LSN and checkpoint LSN. MyRocks should report active WAL files names
and sizes.
5. Release storage engine's locks
6. Unlock binary log
Backup tool will then use this information to copy InnoDB, RocksDB and
MySQL binary logs up to specified positions to end up with consistent DB
state after restore.
Currently, RocksDB allows to obtain the list of WAL files. Only missing
bit is the method to lock the writes to WAL files.
LockWAL method must flush the WAL in order for the reported size to be
accurate (GetSortedWALFiles is using file system stat call to return the
file size), also, since backup tool is going to copy the WAL, it is
better to be flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5146
Differential Revision: D14815447
Pulled By: maysamyabandeh
fbshipit-source-id: eec9535a6025229ed471119f19fe7b3d8ae888a3
Summary:
Although user should first call StartTrace to begin the RocksDB tracing function and call EndTrace to stop the tracing process, user can accidentally call EndTrace first. It will cause segment fault and crash the DB instance. The issue is fixed by checking the pointer first.
Test case added in db_test2.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5130
Differential Revision: D14691420
Pulled By: zhichao-cao
fbshipit-source-id: 3be13d2f944bc453728ef8eef67b68d7ad0939c8
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
Just like ReadOptions::background_purge_on_iterator_cleanup but for ColumnFamilyHandle instead of Iterator.
In our use case we sometimes call ColumnFamilyHandle's destructor from low-latency threads, and sometimes it blocks the thread for a few seconds deleting the files. To avoid that, we can either offload ColumnFamilyHandle's destruction to a background thread on our side, or add this option on rocksdb side. This PR does the latter, to be consistent with how we solve exactly the same problem for iterators using background_purge_on_iterator_cleanup option.
(EDIT: It's avoid_unnecessary_blocking_io now, and affects both CF drops and iterator destructors.)
I'm not quite comfortable with having two separate options (background_purge_on_iterator_cleanup and background_purge_on_cf_cleanup) for such a rarely used thing. Maybe we should merge them? Rename background_purge_on_cf_cleanup to something like delete_files_on_background_threads_only or avoid_blocking_io_in_unexpected_places, and make iterators use it instead of the one in ReadOptions? I can do that here if you guys think it's better.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5043
Differential Revision: D14339233
Pulled By: al13n321
fbshipit-source-id: ccf7efa11c85c9a5b91d969bb55627d0fb01e7b8
Summary:
WAL files are currently not subject to deletion rate limiting by DeleteScheduler. If the size of the WAL files is significant, this can cause a high delete rate on SSDs that may affect other operations. To fix it, force WAL file deletions to go through the SstFileManager. Original PR for this is #2768
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5116
Differential Revision: D14669437
Pulled By: anand1976
fbshipit-source-id: c5f62d0640cebaa1574de841a1d01e4ce2faadf0
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
With https://github.com/facebook/rocksdb/pull/3009 we go through every CF
to check whether a bottommost compaction is needed to be triggered. This is done
within DB mutex. What we do within DB mutex may heavily influece the write throughput
we can achieve, so we always want to minimize work there.
Here we try to avoid this for-loop by first check a global threshold. In most of
the time, the CF loop can be avoided.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5090
Differential Revision: D14582684
Pulled By: siying
fbshipit-source-id: 968f6d9bb6affe1a5ebc4910b418300b076f166f
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
if an operation just involves a single column family, then we do
not have to set the kInAtomicGroup tag when writing to MANIFEST. This change
can fix a compatibility test failure, i.e. 5.15 and earlier cannot recognize
kInAtomicGroup tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4981
Differential Revision: D14072687
Pulled By: riversand963
fbshipit-source-id: 46b0c61e399f16c6b7169de0b33430d0ed90d6d4
Summary:
Make file ingestion atomic.
as title.
Ingesting external SST files into multiple column families should be atomic. If
a crash occurs and db reopens, either all column families have successfully
ingested the files before the crash, or non of the ingestions have any effect
on the state of the db.
Also add unit tests for atomic ingestion.
Note that the unit test here does not cover the case of incomplete atomic group
in the MANIFEST, which is covered in VersionSetTest already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4895
Differential Revision: D13718245
Pulled By: riversand963
fbshipit-source-id: 7df97cc483af73ad44dd6993008f99b083852198
Summary:
Previously, stats were logged in warning level. This was done in that way because
people reported that it wasn't logged in MyRocks. However, later we learned that it turns
out to be due to a bug in MyRocks, which is fixed in
79bb705e74
Now we revert the stats logging to INFO level, so that it doesn't pollute the warning
level logging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4977
Differential Revision: D14058485
Pulled By: siying
fbshipit-source-id: 19fab323c19d9bc88184287f209551f9a77ca0e6
Summary:
In NotFound cases, stats BYTES_READ and perf_context.get_read_bytes is still be increased. The amount increased will be
whatever size of the string or PinnableSlice that users passed in as the output data structure. This is wrong. Fix this by not
increasing these two counters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4938
Differential Revision: D13908963
Pulled By: siying
fbshipit-source-id: 60bce42e4fbb9862bba3da36dbc27b2963ea6162
Summary:
With WritePrepared transaction, flush/compaction can contain uncommitted keys, and those keys can get committed during compaction. If a snapshot is taken before the key is committed, it should not see the key. On the other hand, compaction grab the list of snapshots at its beginning, and only consider those snapshots to dedup keys. Consider the case:
```
seq = 1: put "foo" = "bar"
seq = 2: transaction T: delete "foo", prepare
seq = 3: compaction start
seq = 4: take snapshot S
seq = 5: transaction T: commit.
...
seq = N: compaction iterator reached key "foo".
```
When compaction start, the list of snapshot is empty. Compaction doesn't take snapshot S into account. When it reached "foo", transaction T is committed. Compaction may think the value "foo=bar" is not visible by any snapshot (which is wrong), and compact the value out.
The fix is to explicitly take a snapshot before compaction grabbing the list of snapshots. Compaction will then has to keep keys visible to this snapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4883
Differential Revision: D13668775
Pulled By: maysamyabandeh
fbshipit-source-id: 1cab9615f94b7d3e8522cc3d44c3a14c7d4720e4
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791
Differential Revision: D13498930
Pulled By: riversand963
fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.
Tests:
1. Unit tests
2. make check
3. db_bench -
TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom : 0.167 micros/op 5983920 ops/sec; 426.2 MB/s (1000000 of 1000000 found)
Multireadrandom with batch size 1:
multireadrandom : 0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754
Differential Revision: D13363550
Pulled By: anand1976
fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4
Summary:
The `flush_reason` parameter in `DBImpl::InstallSuperVersionAndScheduleWork` is
not used. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4816
Differential Revision: D13543218
Pulled By: riversand963
fbshipit-source-id: 8fc75d49462ce092e85aef0fe0c50936140db153
Summary:
Introduce the first CPU timing counter, perf_context.get_cpu_nanos. This opens a door to more CPU counters in the future.
Only Posix Env has it implemented using clock_gettime() with CLOCK_THREAD_CPUTIME_ID. How accurate the counter is depends on the platform.
Make PerfStepTimer to take an Env as an argument, and sometimes pass it in. The direct reason is to make the unit tests to use SpecialEnv where we can ingest logic there. But in long term, this is a good change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4741
Differential Revision: D13287798
Pulled By: siying
fbshipit-source-id: 090361049d9d5095d1d1a369fe1338d2e2e1c73f
Summary:
This PR contains the following fixes:
1. Fixing Makefile to support non-default locations of developer tools
2. Fixing compile error using a patch from https://github.com/facebook/rocksdb/pull/4007
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4687
Differential Revision: D13287263
Pulled By: riversand963
fbshipit-source-id: 4525eb42ba7b6f82af5f9bfb8e52fa4024e27ccc
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
options_file_number_ must be written under db::mutex_ sine its read is protected by mutex_ in ::GetLiveFiles(). However currently it is written in ::RenameTempFileToOptionsFile() which according to its contract must be called without holding db::mutex_. The patch fixes the race condition by also acquitting the mutex_ before writing options_file_number_. Also it does that only if the rename of option file is successful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4780
Differential Revision: D13461411
Pulled By: maysamyabandeh
fbshipit-source-id: 2d5bae96a1f3e969ef2505b737cf2d7ae749787b
Summary:
When write stall has already been triggered due to number of L0 files reaching
threshold, file ingestion must proceed with its flush without waiting for the
write stall condition to cleared by the compaction because compaction can wait
for ingestion to finish (circular wait).
In order to avoid this wait, we can set `FlushOptions.allow_write_stall` to be
true (default is false). Setting it to false can cause deadlock.
This can happen when the number of compaction threads is low.
Considere the following
```
Time compaction_thread ingestion_thread
| num_running_ingest_file_++
| while(num_running_ingest_file_>0){wait}
| flush
V
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4751
Differential Revision: D13343037
Pulled By: riversand963
fbshipit-source-id: d3b95938814af46ec4c463feff0b50c70bd8b23f
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
If user do not end the trace manually, the tracing will continue which can potential use up all the storage space and cause problem. In this PR, the max trace file size is added to the TraceOptions and user can set the value if they need or the default is 64GB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4610
Differential Revision: D12893400
Pulled By: zhichao-cao
fbshipit-source-id: acf4b5a6076bb691778bdfbac4864e1006758953
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Hi, yiwu-arbug, I found that `DBImpl::GetColumnFamilyHandleUnlocked` still have data race condition, because `column_family_memtables_` has a stateful cache `current_` and `column_family_memtables_::Seek` maybe call without the protection of `mutex_` by a write thread
check 859dbda6e3/db/write_batch.cc (L1188) and 859dbda6e3/db/write_batch.cc (L1756) and 859dbda6e3/db/db_impl_write.cc (L318)
So it's better to use `versions_->GetColumnFamilySet()->GetColumnFamily` instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4666
Differential Revision: D13027117
Pulled By: yiwu-arbug
fbshipit-source-id: 4e3778eaf8e7f7c8577bbd78129b6a5fd7ce79fb
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.
This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262
Differential Revision: D9283109
Pulled By: riversand963
fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
Summary:
Currently statistics are supposed to be dumped to info log at intervals of `options.stats_dump_period_sec`. However the implementation choice was to bind it with compaction thread, meaning if the database has been serving very light traffic, the stats may not get dumped at all.
We decided to separate stats dumping into a new timed thread using `TimerQueue`, which is already used in blob_db. This will allow us schedule new timed tasks with more deterministic behavior.
Tested with db_bench using `--stats_dump_period_sec=20` in command line:
> LOG:2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:05.643286 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:25.691325 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:45.740989 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG content:
> 2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
2018/09/17-14:07:45.575080 7fe99fbfe700 [WARN] [db/db_impl.cc:606]
** DB Stats **
Uptime(secs): 20.0 total, 20.0 interval
Cumulative writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5.57 GB, 285.01 MB/s
Cumulative WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 GB, 285.01 MB/s
Cumulative stall: 00:00:0.012 H:M:S, 0.1 percent
Interval writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5700.71 MB, 285.01 MB/s
Interval WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 MB, 285.01 MB/s
Interval stall: 00:00:0.012 H:M:S, 0.1 percent
** Compaction Stats [default] **
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4382
Differential Revision: D9933051
Pulled By: miasantreble
fbshipit-source-id: 6d12bb1e4977674eea4bf2d2ac6d486b814bb2fa
Summary:
- Fix DBImpl API race condition
The timeline of execution flow is as follow:
```
timeline user_thread1 user_thread2
t1 | cfh = GetColumnFamilyHandleUnlocked(0)
t2 | id1 = cfh->GetID()
t3 | GetColumnFamilyHandleUnlocked(1)
t4 | id2 = cfh->GetID()
V
```
The original implementation return a pointer to a stateful variable, so that the return `ColumnFamilyHandle` will be changed when another thread calls `GetColumnFamilyHandleUnlocked` with different `column family id`
- Expose ColumnFamily ID to compaction event listener
- Fix the return status of `DBImpl::GetLatestSequenceForKey`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4391
Differential Revision: D10221243
Pulled By: yiwu-arbug
fbshipit-source-id: dec60ee9ff0c8261a2f2413a8506ec1063991993
Summary:
1. Add override keyword to overridden virtual functions in EventListener
2. Fix a memory corruption that can happen during DB shutdown when in
read-only mode due to a background write error
3. Fix uninitialized buffers in error_handler_test.cc that cause
valgrind to complain
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4375
Differential Revision: D9875779
Pulled By: anand1976
fbshipit-source-id: 022ede1edc01a9f7e21ecf4c61ef7d46545d0640
Vijay Nadimpalli