Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
Summary:
Fix prefix_test so that it passes when ASSERT_STATUS_CHECKED=1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7495
Test Plan: Run the test with the option
Reviewed By: anand1976
Differential Revision: D24069715
fbshipit-source-id: 54f74b58575a1b49dbdee9ea2d24751fa956b620
Summary:
This PR schedules a background thread (shared across all DB instances)
to flush info log every ten seconds. This improves debuggability in case
of RocksDB hanging since it ensures the log messages leading up to the hang
will eventually become visible in the log.
The bulk of this PR is moving monitoring/stats_dump_scheduler* to db/periodic_work_scheduler*
and making the corresponding name changes since now the scheduler handles info
log flushing, not just stats dumping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7488
Reviewed By: riversand963
Differential Revision: D24065165
Pulled By: ajkr
fbshipit-source-id: 339c47a0ff43b79fdbd055fbd9fefbb6f9d8d3b5
Summary:
Add all status handling in db_properties_test so that it can pass ASSERT_STATUS_CHECKED.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7490
Test Plan: Run the test with ASSERT_STATUS_CHECKED
Reviewed By: jay-zhuang
Differential Revision: D24065382
fbshipit-source-id: e008916155196891478c964df0226545308ca71d
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Fix few test cases and add them in ASSERT_STATUS_CHECKED build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7427
Test Plan:
1. ASSERT_STATUS_CHECKED=1 make -j48 check,
2. travis build for ASSERT_STATUS_CHECKED,
3. Without ASSERT_STATUS_CHECKED: make check -j64, CircleCI build and travis build
Reviewed By: pdillinger
Differential Revision: D23909983
Pulled By: akankshamahajan15
fbshipit-source-id: 42d7e4aea972acb9fcddb7ca73fcb82f93272434
Summary:
Implement a parsing tool io_tracer_parser that takes IO trace file (binary file) with command line argument --io_trace_file and output file with --output_file and dumps the IO trace records in outputfile in human readable form.
Also added unit test cases that generates IO trace records and calls io_tracer_parse to parse those records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7333
Test Plan:
make check -j64,
Add unit test cases.
Reviewed By: anand1976
Differential Revision: D23772360
Pulled By: akankshamahajan15
fbshipit-source-id: 9c20519c189362e6663352d08863326f3e496271
Summary:
This option is apparently used by some teams within Facebook
(internal ref T75998621)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7431
Test Plan: USE_CLANG=1 make check before (fails) and after
Reviewed By: jay-zhuang
Differential Revision: D23876584
Pulled By: pdillinger
fbshipit-source-id: abb8b67a1f1aac75327944d266e284b2b6727191
Summary:
Introduced `valgrind_check_some`, which is analogous to the `check_some` target for non-valgrind tests. It simplifies the process for running a single valgrind test or subset of valgrind tests when trying to repro a failure.
I also added a `ROCKSDBTESTS_ONLY` parameter, which simplifies selecting a single test to run. Previously the user would have to use `ROCKSDBTESTS_START` and `ROCKSDBTESTS_END`, but it was difficult to determine the end variable since it is an exclusive endpoint and must match an actual test name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7379
Reviewed By: pdillinger
Differential Revision: D23673608
Pulled By: ajkr
fbshipit-source-id: 87ed81f1a671d46c2dff6a701f85f1891c725b3f
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
Was broken by https://github.com/facebook/rocksdb/issues/6660
Travis times before this change, after 6660:
platform_dependent: 17 min
group 1: 15 min
group 2: 44 min (often timeout on non-x86 or non-Linux)
group 3: 31 min
group 4: 21 min
After this change:
TODO
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7360
Test Plan: CI inspection
Reviewed By: ajkr
Differential Revision: D23586917
Pulled By: pdillinger
fbshipit-source-id: 4c67cf33180b0b833c39a817e6c1f128727941d2
Summary:
Also enables a pull request to trigger all the Travis
configurations by writing FULL_CI in the commit message. (See what I did
there?)
First issue
make: *** No rule to make target 'jl/util/crc32c_ppc_asm.o', needed by 'rocksdbjava'. Stop.
Second issue
tools/db_bench_tool.cc:5514:38: error: ‘gen_exp.rocksdb::Benchmark::GenerateTwoTermExpKeys::keyrange_size_’ may be used uninitialized in this function
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7359
Test Plan: CI
Reviewed By: zhichao-cao
Differential Revision: D23582132
Pulled By: pdillinger
fbshipit-source-id: 06d794673fd522ba11cf6398385387e6bd97ef89
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7315
Test Plan:
`ASSERT_STATUS_CHECKED=1 make sst_dump_test && ./sst_dump_test`
And manually run `./sst_dump --file=*.sst` before and after the change.
Reviewed By: pdillinger
Differential Revision: D23361669
Pulled By: jay-zhuang
fbshipit-source-id: 5bf51a2a90ee35c8c679e5f604732ec2aef5949a
Summary:
These new functions and 128-bit value bit operations are
expected to be used in a forthcoming Bloom filter alternative.
No functional changes to production code, just new code only called by
unit tests, cosmetic changes to existing headers, and fix an existing
function for a yet-unused template instantiation (BitsSetToOne on
something signed and smaller than 32 bits).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7338
Test Plan:
Unit tests included. Works with and without
TEST_UINT128_COMPAT=1 to check compatibility with and without
__uint128_t. Also added that parameter to the CircleCI build
build-linux-shared_lib-alt_namespace-status_checked.
Reviewed By: jay-zhuang
Differential Revision: D23494945
Pulled By: pdillinger
fbshipit-source-id: 5c0dc419100d9df5d4d9abb153b2855d5aea39e8
Summary:
A new file interface `SupportPrefetch()` is added. When the user overrides it to `false`, an internal prefetch buffer will be used for readahead. Useful for non-directIO but FS doesn't have readahead support.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7312
Reviewed By: anand1976
Differential Revision: D23329847
Pulled By: jay-zhuang
fbshipit-source-id: 71cd4ce6f4a820840294e4e6aec111ab76175527
Summary:
The patch adds a class called `BlobFileBuilder` that can be used to build
and cut blob files in background jobs (flushes/compactions). The class
enforces a value size threshold (`min_blob_size`; smaller blobs will be inlined
in the LSM tree itself), and supports specifying a blob file size limit (`blob_file_size`),
as well as compression (`blob_compression_type`) and checksums for blob files.
It also keeps track of the generated blob files and their associated `BlobFileAddition`
metadata, which can be applied as part of the background job's `VersionEdit`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7306
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23298817
Pulled By: ltamasi
fbshipit-source-id: 38f35d81dab1ba81f15236240612ec173d7f21b5
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
pkg-config files are quite useful for communicating to users of a
library how to compile against them. This commit generates and installs
a pkg-config file that can be used for both static and dynamic builds
against the RocksDB library. This should make life easier for developers
of client programs, language bindings, etc.
Example usage:
```
g++ `pkg-config --cflags rocksdb` -o simple_example simple_example.cc `pkg-config --libs rocksdb`
g++ `pkg-config --cflags --static rocksdb` -static \
-o simple_example simple_example.cc `pkg-config --libs --static rocksdb`
```
The commit also adds the generated file to .gitignore, to the uninstall
target, and to clean.
No additional dependencies are added to RocksDB itself, and this does
not make RocksDB use pkg-config as part of its build process.
Resolves https://github.com/facebook/rocksdb/issues/4452
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7244
Reviewed By: siying
Differential Revision: D23146153
Pulled By: ajkr
fbshipit-source-id: 3045aa650d68bd5ac42d40ed709570e9584ef004
Summary:
Have a global StatsDumpScheduler for all DB instance stats dumping, including `DumpStats()` and `PersistStats()`. Before this, there're 2 dedicate threads for every DB instance, one for DumpStats() one for PersistStats(), which could create lots of threads if there're hundreds DB instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7223
Reviewed By: riversand963
Differential Revision: D23056737
Pulled By: jay-zhuang
fbshipit-source-id: 0faa2311142a73433ebb3317361db7cbf43faeba
Summary:
`-O3` is already adopted widely, so we should make it easier to configure
for development/open source. This PR adds an `OPTIMIZE_LEVEL` variable
that users can set to override the `-O` flag chosen in the Makefile.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7202
Test Plan: built a few different ways and verified correct value is passed for `-O` flag
Reviewed By: pdillinger
Differential Revision: D22845291
Pulled By: ajkr
fbshipit-source-id: 84471362e7d627dd606b25bf5f6a3d796817fa1c
Summary:
Improvements to the RocksJava release process:
* Generates the Maven artifact version number as part of the release step
* Also generates appropriate checksum files to speed the deploy and publish step
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7219
Reviewed By: ltamasi
Differential Revision: D22983481
Pulled By: pdillinger
fbshipit-source-id: 7b8ffaf46471cd3cda181eb830c962b317d2e688
Summary:
`WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`.
`WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size).
`WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery).
`WalSet` is the set of alive WALs kept in `VersionSet`.
1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs
On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber.
But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk.
We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST.
In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs.
2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo`
`VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`.
But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s.
Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references.
So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164
Test Plan:
make version_edit_test && ./version_edit_test
make wal_edit_test && ./wal_edit_test
Reviewed By: ltamasi
Differential Revision: D22677936
Pulled By: cheng-chang
fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
Summary:
Make (most of) the env*_test pass when ASSERT_STATUS_CHECKED is enabled.
One test that opens a database is currently disabled in this mode, as there are many errors that need revisited for DB tests and status checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7176
Reviewed By: cheng-chang
Differential Revision: D22799278
Pulled By: ajkr
fbshipit-source-id: 16d8a02eaeecd6df1060249b6a5811292801f2ed
Summary:
`USE_LTO=1` in `make` commands now enables LTO. The archiver (`ar`) needed
to change in this PR to use a wrapper that enables the LTO plugin.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7181
Test Plan:
build a few ways
```
$ make clean && USE_LTO=1 make -j48 db_bench
$ make clean && USE_CLANG=1 USE_LTO=1 make -j48 db_bench
$ make clean && ROCKSDB_NO_FBCODE=1 USE_LTO=1 make -j48 db_bench
```
Reviewed By: cheng-chang
Differential Revision: D22784994
Pulled By: ajkr
fbshipit-source-id: 9c45333bd49bf4615aa04c85b7c6fd3925421152
Summary:
Two TSAN tests occaionaly fail. Exclude them for now:
[ RUN ] DeleteFileTest.BackgroundPurgeCFDropTest
db/deletefile_test.cc:122: Failure
Expected equality of these values:
required_manifest
Which is: 1
manifest_cnt
Which is: 2
[ RUN ] FormatLatest/ColumnFamilyTest.FlushCloseWALFiles/0
db/column_family_test.cc:3004: Failure
Expected equality of these values:
2
env.num_open_wal_file_.load()
Which is: 1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7152
Test Plan: Watch CircleCI restuls
Reviewed By: ajkr
Differential Revision: D22632285
fbshipit-source-id: 29fa348e8be917be0237c74812a8b0b04978e84e
Summary:
In CircleCI tests, we failed to fail tests properly if parallel doesn't return an error code. It's probably would happen when unit tests fail with signals, rather than return values. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7147
Test Plan: Manually ingest a failure and see it to fail.
Reviewed By: jay-zhuang
Differential Revision: D22611594
fbshipit-source-id: 88a42425a41d1213d29bd2e7c80731d2bdd5644b
Summary:
This fixes an issue introduced in 0c56fc4 whereby the location of Python is evaluated many times and leads to excessive logging of unknown python locations of CentOS 6.
The location is now only checked once.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7123
Reviewed By: zhichao-cao
Differential Revision: D22532274
Pulled By: ajkr
fbshipit-source-id: cade71b4b46e9a23d63ecb4dd36a4ac8ae217970
Summary:
It is helpful to add some TSAN coverage before a pull request is committed. This diff adds some of them.
Some slow tests are excluded for the running speed. Some are blacklisted because they show warnings. Will investigate these warnings and see whether we can fix or suppress them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7122
Test Plan: Watch CIrcleCI runs
Reviewed By: riversand963
Differential Revision: D22532133
fbshipit-source-id: 81ddd02d9df19c513a12811979e8ddabae911354
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
On some platforms like MacOS, a second 'make check' can lead to
/bin/rm: Argument list too long
This is fixed by replacing with a 'find'. Also, using '-f' for more rm calls
to avoid prompt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7095
Test Plan: 'make check' on Linux and MacOS
Reviewed By: riversand963
Differential Revision: D22415808
Pulled By: pdillinger
fbshipit-source-id: 0fd1ebae13739c9d81f9e813e99b062715604d6b
Summary:
by tracking and linking against runtime dependent libraries in
Makefile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7098
Test Plan: look for fix in CircleCI
Reviewed By: riversand963
Differential Revision: D22420860
Pulled By: pdillinger
fbshipit-source-id: d211d709214bf5306db68e43b7a2f18169281022
Summary:
Primarily, this change adds a way to work around a bug limiting the effective output (and therefore debugability) of the Linux builds using parallel make. We would get
make[1]: write error: stdout
probably due to a kernel bug, apparently affecting both available ubuntu 16 machine images (maybe not affecting docker images, less horsepower). https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1814393
Now in the CircleCI config, make output on Ubuntu is piped through a custom 'cat' that ignores EAGAIN errors, which seems to fix the problem.
Significant other changes:
* Add another linux build that combines
* LIB_MODE=shared, to ensure this works with compile and unit test execution
* Alternative rocksdb namespace, to ensure this works (not rely on Travis)
* ASSERT_STATUS_CHECKED=1, but with building all unit tests and running those expected to pass with it
* Run release build with and without gflags. (Was running only without, ignore large swaths of code in a normal release build! Two regressions in this build, only with gflags, in the last week not caught by CI!)
* Use gflags with unity and LITE build, as typical case.
Debugability improvements:
* Use V=1 to show commands being executed (thanks to EAGAIN work-around)
* Print kernel version and compiler versions as part of V=1 output from Makefile
Cosmetic other changes:
* Put more commands on one line, for less clutter in CircleCI output pages
* Remove redundant "all" in "make all check" and put make command options before targets
* Change some recursive "make clean" into dependency on "clean," toward minimizing unnecessary overhead (detect platform, build version, etc.) of extra recursive makes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7078
Reviewed By: siying
Differential Revision: D22391647
Pulled By: pdillinger
fbshipit-source-id: d446fccf5a8c568b37dc8748621c8a5c546fe135
Summary:
(a) use STRESS_LIBRARY for db_stress and make sure
STRESS_LIBRARY has other stress test dependencies (as in buck build)
(b) fix rpath option to be accepted on MacOS. It still doesn't fully work
for me e.g. to run a LIB_MODE=shared unit test binary from another
directory, as it does on Linux, but the option is now accepted, and running
unit tests from current directory works for me.
Also adding LIB_MODE=shared to Travis. (Later TBD where best to fit in
in CircleCI.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7066
Test Plan: manual
Reviewed By: cheng-chang
Differential Revision: D22364068
Pulled By: pdillinger
fbshipit-source-id: 6fa98a222f89f808ee786474de1100d92c1adec3
Summary:
Change the linking of tests/tools to be against a library rather than a list of objects. This change substantially reduces the size of the objects produced.
peterd clean repo size: 264M
Before this change, with make all: 40G
After this change, with make all: 28G
With make LIB_MODE=shared all: 7.0G
The list of TESTS was changed from being hard-coded to generated from the test sources variable. Note that there are some test sources that are not built as tests (though the set of tests is identical to the previous version).
Added OBJ_DIR option to Makefile to allow objects to be placed in an alternative location. By default, OBJ_DIR is the same as before ("./").
This change is a precursor to being able to build/run the tests/tools linked against static libraries. Additionally, it should be possible to clean up and merge some of the rules for building tests and the like if so desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6660
Reviewed By: riversand963
Differential Revision: D22244463
Pulled By: pdillinger
fbshipit-source-id: db9c6341d81ed62c2270374f4ede02fb9604c754
Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026
Test Plan: watch tests to pass.
Reviewed By: zhichao-cao
Differential Revision: D22223197
fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
Summary:
1. As part of IOTracing project, Add a class IOTracer,
IOTraceReader and IOTracerWriter that writes the file operations
information in a binary file. IOTrace Record contains record information
and right now it contains access_timestamp, file_operation, file_name,
io_status, len, offset and later other options will be added when file
system APIs will be call IOTracer.
2. Add few unit test cases that verify that reading and writing to a IO
Trace file is working properly and before start trace and after ending
trace nothing is added to the binary file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6958
Test Plan:
1. make check -j64
2. New testcases for IOTracer.
Reviewed By: anand1976
Differential Revision: D21943375
Pulled By: akankshamahajan15
fbshipit-source-id: 3532204e2a3eab0104bf411ab142e3fdd4fbce54
Summary:
Add crash test for the case of best-efforts recovery.
After a certain amount of time, we kill the db_stress process, randomly delete some certain table files and restart db_stress. Given the randomness of file deletion, it is difficult to verify against a reference for data correctness. Therefore, we just check that the db can restart successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6819
Test Plan:
```
./db_stress -best_efforts_recovery=true -disable_wal=1 -reopen=0
./db_stress -best_efforts_recovery=true -disable_wal=0 -skip_verifydb=1 -verify_db_one_in=0 -continuous_verification_interval=0
make crash_test_with_best_efforts_recovery
```
Reviewed By: anand1976
Differential Revision: D21436753
Pulled By: riversand963
fbshipit-source-id: 0b3605c922a16c37ed17d5ab6682ca4240e47926
Summary:
Moving towards the long term goal of moving most CI build to CircleCI when possible, add some Linux tests in CircleCI. This is not all what we can include to CircleCI. For example, Java builds are not includ
ed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6937
Test Plan: Watch CI build results.
Reviewed By: pdillinger
Differential Revision: D21941605
fbshipit-source-id: db6aead3c45f523386d4fb30d224cfde573cccad
Summary:
Currently, `DeleteDir` only deletes the directory if there are no other directories under the target dir. This PR makes it delete directories recursively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6934
Test Plan:
Added a new unit test in testutil_test.cc.
`make testutil_test`
Reviewed By: zhichao-cao
Differential Revision: D21884211
Pulled By: cheng-chang
fbshipit-source-id: 0b9a48a200f494ee007aef5d1763b4aa331f8b5a
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
People keep breaking the gcc 4.8 compilation due to different
warnings for shadowing member functions with locals. Adding to Travis
to keep compatibility. (gcc 4.8 is default on CentOS 7.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6915
Test Plan: local and Travis
Reviewed By: siying
Differential Revision: D21842894
Pulled By: pdillinger
fbshipit-source-id: bdcd4385127ee5d1cc222d87e53fb3695c32a9d4
Summary:
RocksDB Makefile was assuming existence of 'python' command,
which is not present in CentOS 8. We avoid using 'python' if 'python3' is available.
Also added fancy logic to format-diff.sh to make clang-format-diff.py for Python2 work even with Python3 only (as some CentOS 8 FB machines come equipped)
Also, now use just 'python3' for PYTHON if not found so that an informative
"command not found" error will result rather than something weird.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6883
Test Plan: manually tried some variants, 'make check' on a fresh CentOS 8 machine without 'python' executable or Python2 but with clang-format-diff.py for Python2.
Reviewed By: gg814
Differential Revision: D21767029
Pulled By: pdillinger
fbshipit-source-id: 54761b376b140a3922407bdc462f3572f461d0e9
Summary:
* Print stack trace on status checked failure
* Make folly_synchronization_distributed_mutex_test a parallel test
* Disable ldb_test.py and rocksdb_dump_test.sh with
ASSERT_STATUS_CHECKED (broken)
* Fix shadow warning in random_access_file_reader.h reported by gcc
4.8.5 (ROCKSDB_NO_FBCODE), also https://github.com/facebook/rocksdb/issues/6866
* Work around compiler bug on max_align_t for gcc < 4.9
* Remove an apparently wrong comment in status.h
* Use check_some in Travis config (for proper diagnostic output)
* Fix ignored Status in loop in options_helper.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6871
Test Plan: manual, CI
Reviewed By: ajkr
Differential Revision: D21706619
Pulled By: pdillinger
fbshipit-source-id: daf6364173d6689904eb394461a69a11f5bee2cb
Summary:
Fixed some option handling code that recently broke the
ASSERT_STATUS_CHECKED build for options_test.
Added all other existing tests that pass under ASSERT_STATUS_CHECKED to
the whitelist.
Added a Travis configuration to run all whitelisted tests with
ASSERT_STATUS_CHECKED. (Someday we might enable this check by default in
debug builds.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6870
Test Plan: ASSERT_STATUS_CHECKED=1 make check, Travis
Reviewed By: ajkr
Differential Revision: D21704374
Pulled By: pdillinger
fbshipit-source-id: 15daef98136a19d7a6843fa0c9ec08738c2ac693
Summary:
... so that we have freedom to upgrade it (see https://github.com/facebook/rocksdb/issues/6808).
As a side benefit, gtest will no longer be linked into main library in
buck build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6858
Test Plan: fb internal build & link
Reviewed By: riversand963
Differential Revision: D21652061
Pulled By: pdillinger
fbshipit-source-id: 6018104af944debde576b5beda6c134e737acedb
Summary:
Currently, in direct IO mode, `MultiGet` retrieves the data blocks one by one instead of in parallel, see `BlockBasedTable::RetrieveMultipleBlocks`.
Since direct IO is supported in `RandomAccessFileReader::MultiRead` in https://github.com/facebook/rocksdb/pull/6446, this PR applies `MultiRead` to `MultiGet` so that the data blocks can be retrieved in parallel.
Also, in direct IO mode and when data blocks are compressed and need to uncompressed, this PR only allocates one continuous aligned buffer to hold the data blocks, and then directly uncompress the blocks to insert into block cache, there is no longer intermediate copies to scratch buffers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6815
Test Plan:
1. added a new unit test `BlockBasedTableReaderTest::MultiGet`.
2. existing unit tests and stress tests contain tests against `MultiGet` in direct IO mode.
Reviewed By: anand1976
Differential Revision: D21426347
Pulled By: cheng-chang
fbshipit-source-id: b8446ae0e74152444ef9111e97f8e402ac31b24f
Summary:
Tried making Status object enforce that it is checked in some way. In cases it is not checked, `PermitUncheckedError()` must be called explicitly.
Added a way to run tests (`ASSERT_STATUS_CHECKED=1 make -j48 check`) on a
whitelist. The effort appears significant to get each test to pass with
this assertion, so I only fixed up enough to get one test (`options_test`)
working and added it to the whitelist.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6798
Reviewed By: pdillinger
Differential Revision: D21377404
Pulled By: ajkr
fbshipit-source-id: 73236f9c8df38f01cf24ecac4a6d1661b72d077e
Summary:
Add Github Action to perform some basic sanity check for PR, inclding the
following.
1) Buck TARGETS file.
On the one hand, The TARGETS file is used for internal buck, and we do not
manually update it. On the other hand, we need to run the buckifier scripts to
update TARGETS whenever new files are added, etc. With this Github Action, we
make sure that every PR does not forget this step. The GH Action uses
a Makefile target called check-buck-targets. Users can manually run `make
check-buck-targets` on local machine.
2) Code format
We use clang-format-diff.py to format our code. The GH Action in this PR makes
sure this step is not skipped. The checking script build_tools/format-diff.sh assumes that `clang-format-diff.py` is executable.
On host running GH Action, it is difficult to download `clang-format-diff.py` and make it
executable. Therefore, we modified build_tools/format-diff.sh to handle the case in which there is a non-executable clang-format-diff.py file in the top-level rocksdb repo directory.
Test Plan (Github and devserver):
Watch for Github Action result in the `Checks` tab.
On dev server
```
make check-format
make check-buck-targets
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6761
Test Plan: Watch for Github Action result in the `Checks` tab.
Reviewed By: pdillinger
Differential Revision: D21260209
Pulled By: riversand963
fbshipit-source-id: c646e2f37c6faf9f0614b68aa0efc818cff96787
Summary:
Some common build variables like USE_CLANG and
COMPILE_WITH_UBSAN did not work if specified as make variables, as in
`make USE_CLANG=1 check` etc. rather than (in theory less hygienic)
`USE_CLANG=1 make check`. This patches Makefile to export some commonly
used ones to build_detect_platform so that they work. (I'm skeptical of
a broad `export` in Makefile because it's hard to predict how random
make variables might affect various invoked tools.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6740
Test Plan: manual / CI
Reviewed By: siying
Differential Revision: D21229011
Pulled By: pdillinger
fbshipit-source-id: b00c69b23eb2a13105bc8d860ce2d1e61ac5a355
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
Updates the version of bzip2 used for RocksJava static builds.
Please, can we also get this cherry-picked to:
1. 6.7.fb
2. 6.8.fb
3. 6.9.fb
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6714
Reviewed By: cheng-chang
Differential Revision: D21067233
Pulled By: pdillinger
fbshipit-source-id: 8164b7eb99c5ca7b2021ab8c371ba9ded4cb4f7e
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Towards making compaction logic compatible with user timestamp.
When computing boundaries and overlapping ranges for inputs of compaction, We need to compare SSTs by user key without timestamp.
Test plan (devserver):
```
make check
```
Several individual tests:
```
./version_set_test --gtest_filter=VersionStorageInfoTimestampTest.GetOverlappingInputs
./db_with_timestamp_compaction_test
./db_with_timestamp_basic_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6645
Reviewed By: ltamasi
Differential Revision: D20960012
Pulled By: riversand963
fbshipit-source-id: ad377fa9eb481bf7a8a3e1824aaade48cdc653a4
Summary:
New memory technologies are being developed by various hardware vendors (Intel DCPMM is one such technology currently available). These new memory types require different libraries for allocation and management (such as PMDK and memkind). The high capacities available make it possible to provision large caches (up to several TBs in size), beyond what is achievable with DRAM.
The new allocator provided in this PR uses the memkind library to allocate memory on different media.
**Performance**
We tested the new allocator using db_bench.
- For each test, we vary the size of the block cache (relative to the size of the uncompressed data in the database).
- The database is filled sequentially. Throughput is then measured with a readrandom benchmark.
- We use a uniform distribution as a worst-case scenario.
The plot shows throughput (ops/s) relative to a configuration with no block cache and default allocator.
For all tests, p99 latency is below 500 us.
**Changes**
- Add MemkindKmemAllocator
- Add --use_cache_memkind_kmem_allocator db_bench option (to create an LRU block cache with the new allocator)
- Add detection of memkind library with KMEM DAX support
- Add test for MemkindKmemAllocator
**Minimum Requirements**
- kernel 5.3.12
- ndctl v67 - https://github.com/pmem/ndctl
- memkind v1.10.0 - https://github.com/memkind/memkind
**Memory Configuration**
The allocator uses the MEMKIND_DAX_KMEM memory kind. Follow the instructions on[ memkind’s GitHub page](https://github.com/memkind/memkind) to set up NVDIMM memory accordingly.
Note on memory allocation with NVDIMM memory exposed as system memory.
- The MemkindKmemAllocator will only allocate from NVDIMM memory (using memkind_malloc with MEMKIND_DAX_KMEM kind).
- The default allocator is not restricted to RAM by default. Based on NUMA node latency, the kernel should allocate from local RAM preferentially, but it’s a kernel decision. numactl --preferred/--membind can be used to allocate preferentially/exclusively from the local RAM node.
**Usage**
When creating an LRU cache, pass a MemkindKmemAllocator object as argument.
For example (replace capacity with the desired value in bytes):
```
#include "rocksdb/cache.h"
#include "memory/memkind_kmem_allocator.h"
NewLRUCache(
capacity /*size_t*/,
6 /*cache_numshardbits*/,
false /*strict_capacity_limit*/,
false /*cache_high_pri_pool_ratio*/,
std::make_shared<MemkindKmemAllocator>());
```
Refer to [RocksDB’s block cache documentation](https://github.com/facebook/rocksdb/wiki/Block-Cache) to assign the LRU cache as block cache for a database.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6214
Reviewed By: cheng-chang
Differential Revision: D19292435
fbshipit-source-id: 7202f47b769e7722b539c86c2ffd669f64d7b4e1
Summary:
Although there are tests related to locking in transaction_test, this new test directly tests against TransactionLockMgr.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6599
Test Plan: make transaction_lock_mgr_test && ./transaction_lock_mgr_test
Reviewed By: lth
Differential Revision: D20673749
Pulled By: cheng-chang
fbshipit-source-id: 1fa4a13218e68d785f5a99924556751a8c5c0f31
Summary:
Adding a simple timer support to schedule work at a fixed time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6543
Test Plan: TODO: clean up the unit tests, and make them better.
Reviewed By: siying
Differential Revision: D20465390
Pulled By: sagar0
fbshipit-source-id: cba143f70b6339863e1d0f8b8bf92e51c2b3d678
Summary:
When Travis times out, it's hard to determine whether
the last executing thing took an excessively long time or the
sum of all the work just exceeded the time limit. This
change inserts some timestamps in the output that should
make this easier to determine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6643
Test Plan: CI (Travis mostly)
Reviewed By: anand1976
Differential Revision: D20843901
Pulled By: pdillinger
fbshipit-source-id: e7aae5434b0c609931feddf238ce4355964488b7
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
In some of the test, db_basic_test may cause time out due to its long running time. Separate the timestamp related test from db_basic_test to avoid the potential issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6516
Test Plan: pass make asan_check
Differential Revision: D20423922
Pulled By: zhichao-cao
fbshipit-source-id: d6306f89a8de55b07bf57233e4554c09ef1fe23a
Summary:
In the `.travis.yml` file the `jdk: openjdk7` element is ignored when `language: cpp`. So whatever version of the JDK that was installed in the Travis container was used - typically JDK 11.
To ensure our RocksJava builds are working, we now instead install and use OpenJDK 8. Ideally we would use OpenJDK 7, as RocksJava supports Java 7, but many of the newer Travis containers don't support Java 7, so Java 8 is the next best thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6512
Differential Revision: D20388296
Pulled By: pdillinger
fbshipit-source-id: 8bbe6b59b70cfab7fe81ff63867d907fefdd2df1
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.
This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.
Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457
Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.
`make check`
Differential Revision: D20131243
Pulled By: cheng-chang
fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
Summary:
* **macOS version:** 10.15.2 (Catalina)
* **XCode/Clang version:** Apple clang version 11.0.0 (clang-1100.0.33.16)
Before this bugfix the error generated is:
```
In file included from ./util/compression.h:23:
./snappy-1.1.7/snappy.h:76:59: error: unknown type name 'string'; did you mean 'std::string'?
size_t Compress(const char* input, size_t input_length, string* output);
^~~~~~
std::string
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/iosfwd:211:65: note: 'std::string' declared here
typedef basic_string<char, char_traits<char>, allocator<char> > string;
^
In file included from db/builder.cc:10:
In file included from ./db/builder.h:12:
In file included from ./db/range_tombstone_fragmenter.h:15:
In file included from ./db/pinned_iterators_manager.h:12:
In file included from ./table/internal_iterator.h:13:
In file included from ./table/format.h:25:
In file included from ./options/cf_options.h:14:
In file included from ./util/compression.h:23:
./snappy-1.1.7/snappy.h:85:19: error: unknown type name 'string'; did you mean 'std::string'?
string* uncompressed);
^~~~~~
std::string
/Library/Developer/CommandLineTools/usr/bin/../include/c++/v1/iosfwd:211:65: note: 'std::string' declared here
typedef basic_string<char, char_traits<char>, allocator<char> > string;
^
2 errors generated.
make: *** [jls/db/builder.o] Error 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6496
Differential Revision: D20389254
Pulled By: pdillinger
fbshipit-source-id: 2864245c8d0dba7b2ab81294241a62f2adf02e20
Summary:
It's never too soon to refactor something. The patch splits the recently
introduced (`VersionEdit` related) `BlobFileState` into two classes
`BlobFileAddition` and `BlobFileGarbage`. The idea is that once blob files
are closed, they are immutable, and the only thing that changes is the
amount of garbage in them. In the new design, `BlobFileAddition` contains
the immutable attributes (currently, the count and total size of all blobs, checksum
method, and checksum value), while `BlobFileGarbage` contains the mutable
GC-related information elements (count and total size of garbage blobs). This is a
better fit for the GC logic and is more consistent with how SST files are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6502
Test Plan: `make check`
Differential Revision: D20348352
Pulled By: ltamasi
fbshipit-source-id: ff93f0121e80ab15e0e0a6525ba0d6af16a0e008
Summary:
In the current code base, we can use FaultInjectionTestEnv to simulate the env issue such as file write/read errors, which are used in most of the test. The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. This PR implement the FaultInjectionTestFS, which can be used to simulate when File System has issues such as IO error. user can specify any IOStatus error as input, such that FS corresponding actions will return certain error to the caller.
A set of ErrorHandlerFSTests are introduced for testing
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6414
Test Plan: pass make asan_check, pass error_handler_fs_test.
Differential Revision: D20252421
Pulled By: zhichao-cao
fbshipit-source-id: e922038f8ce7e6d1da329fd0bba7283c4b779a21
Summary:
BlobDB currently does not keep track of blob files: no records are written to
the manifest when a blob file is added or removed, and upon opening a database,
the list of blob files is populated simply based on the contents of the blob directory.
This means that lost blob files cannot be detected at the moment. We plan to solve
this issue by making blob files a part of `Version`; as a first step, this patch makes
it possible to store information about blob files in `VersionEdit`. Currently, this information
includes blob file number, total number and size of all blobs, and total number and size
of garbage blobs. However, the format is extensible: new fields can be added in
both a forward compatible and a forward incompatible manner if needed (similarly
to `kNewFile4`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6416
Test Plan: `make check`
Differential Revision: D19894234
Pulled By: ltamasi
fbshipit-source-id: f9753e1f2aedf6dadb70c09b345207cb9c58c329
Summary:
Add a utility class `Defer` to defer the execution of a function until the Defer object goes out of scope.
Used in VersionSet:: ProcessManifestWrites as an example.
The inline comments for class `Defer` have more details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6382
Test Plan: `make defer_test version_set_test && ./defer_test && ./version_set_test`
Differential Revision: D19797538
Pulled By: cheng-chang
fbshipit-source-id: b1a9b7306e4fd4f48ec2ab55783caa561a315f0f
Levi Tamasi
