Summary:
It's logically correct for PinnableSlice to support move semantics to transfer ownership of the pinned memory region. This PR adds both move constructor and move assignment to PinnableSlice.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6374
Test Plan:
A set of unit tests for the move semantics are added in slice_test.
So `make slice_test && ./slice_test`.
Differential Revision: D19739254
Pulled By: cheng-chang
fbshipit-source-id: f898bd811bb05b2d87384ec58b645e9915e8e0b1
Summary:
I set up a mirror of our Java deps on github so we can download
them through github URLs rather than maven.org, which is proving
terribly unreliable from Travis builds.
Also sanitized calls to curl, so they are easier to read and
appropriately fail on download failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6348
Test Plan: CI
Differential Revision: D19633621
Pulled By: pdillinger
fbshipit-source-id: 7eb3f730953db2ead758dc94039c040f406790f3
Summary:
Both changes are related to RocksJava:
1. Allow dependencies that are already present on the host system due to Maven to be reused in Docker builds.
2. Extend the `make clean-not-downloaded` target to RocksJava, so that libraries needed as dependencies for the test suite are not deleted and re-downloaded unnecessarily.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6318
Differential Revision: D19608742
Pulled By: pdillinger
fbshipit-source-id: 25e25649e3e3212b537ac4512b40e2e53dc02ae7
Summary:
Clang analyzer was falsely reporting on use of txn=nullptr.
Added a new const variable so that it can properly prune impossible
control flows.
Also, 'make analyze' previously required setting USE_CLANG=1 as an
environment variable, not a make variable, or else compilation errors
like
g++: error: unrecognized command line option ‘-Wshorten-64-to-32’
Now USE_CLANG is not required for 'make analyze' (it's implied) and you
can do an incremental analysis (recompile what has changed) with
'USE_CLANG=1 make analyze_incremental'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6244
Test Plan: 'make -j24 analyze', 'make crash_test'
Differential Revision: D19225950
Pulled By: pdillinger
fbshipit-source-id: 14f4039aa552228826a2de62b2671450e0fed3cb
Summary:
Currently, db_stress performs verification by calling `VerifyDb()` at the end of test and optionally before tests start. In case of corruption or incorrect result, it will be too late. This PR adds more verification in two ways.
1. For cf consistency test, each test thread takes a snapshot and verifies every N ops. N is configurable via `-verify_db_one_in`. This option is not supported in other stress tests.
2. For cf consistency test, we use another background thread in which a secondary instance periodically tails the primary (interval is configurable). We verify the secondary. Once an error is detected, we terminate the test and report. This does not affect other stress tests.
Test plan (devserver)
```
$./db_stress -test_cf_consistency -verify_db_one_in=0 -ops_per_thread=100000 -continuous_verification_interval=100
$./db_stress -test_cf_consistency -verify_db_one_in=1000 -ops_per_thread=10000 -continuous_verification_interval=0
$make crash_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6173
Differential Revision: D19047367
Pulled By: riversand963
fbshipit-source-id: aeed584ad71f9310c111445f34975e5ab47a0615
Summary:
Adds a python script to syntax check all python files in the
repository and report any errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6209
Test Plan:
'make check' with and without seeded syntax errors. Also look
for "No syntax errors in 34 .py files" on success, and in java_test CI output
Differential Revision: D19166756
Pulled By: pdillinger
fbshipit-source-id: 537df464b767260d66810b4cf4c9808a026c58a4
Summary:
And clean up related code, especially in stress test.
(More clean up of db_stress_test_base.cc coming after this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6154
Test Plan: make check, make blackbox_crash_test for a bit
Differential Revision: D18938180
Pulled By: pdillinger
fbshipit-source-id: 524d27621b8dbb25f6dff40f1081e7c00630357e
Summary:
Error message when running `make` on Mac OS with master branch (v6.6.0):
```
$ make
$DEBUG_LEVEL is 1
Makefile:168: Warning: Compiling in debug mode. Don't use the resulting binary in production
third-party/folly/folly/synchronization/WaitOptions.cpp:6:10: fatal error: 'folly/synchronization/WaitOptions.h' file not found
#include <folly/synchronization/WaitOptions.h>
^
1 error generated.
third-party/folly/folly/synchronization/ParkingLot.cpp:6:10: fatal error: 'folly/synchronization/ParkingLot.h' file not found
#include <folly/synchronization/ParkingLot.h>
^
1 error generated.
third-party/folly/folly/synchronization/DistributedMutex.cpp:6:10: fatal error: 'folly/synchronization/DistributedMutex.h' file not found
#include <folly/synchronization/DistributedMutex.h>
^
1 error generated.
third-party/folly/folly/synchronization/AtomicNotification.cpp:6:10: fatal error: 'folly/synchronization/AtomicNotification.h' file not found
#include <folly/synchronization/AtomicNotification.h>
^
1 error generated.
third-party/folly/folly/detail/Futex.cpp:6:10: fatal error: 'folly/detail/Futex.h' file not found
#include <folly/detail/Futex.h>
^
1 error generated.
GEN util/build_version.cc
$DEBUG_LEVEL is 1
Makefile:168: Warning: Compiling in debug mode. Don't use the resulting binary in production
third-party/folly/folly/synchronization/WaitOptions.cpp:6:10: fatal error: 'folly/synchronization/WaitOptions.h' file not found
#include <folly/synchronization/WaitOptions.h>
^
1 error generated.
third-party/folly/folly/synchronization/ParkingLot.cpp:6:10: fatal error: 'folly/synchronization/ParkingLot.h' file not found
#include <folly/synchronization/ParkingLot.h>
^
1 error generated.
third-party/folly/folly/synchronization/DistributedMutex.cpp:6:10: fatal error: 'folly/synchronization/DistributedMutex.h' file not found
#include <folly/synchronization/DistributedMutex.h>
^
1 error generated.
third-party/folly/folly/synchronization/AtomicNotification.cpp:6:10: fatal error: 'folly/synchronization/AtomicNotification.h' file not found
#include <folly/synchronization/AtomicNotification.h>
^
1 error generated.
third-party/folly/folly/detail/Futex.cpp:6:10: fatal error: 'folly/detail/Futex.h' file not found
#include <folly/detail/Futex.h>
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6145
Differential Revision: D18910812
fbshipit-source-id: 5a4475466c2d0601657831a0b48d34316b2f0816
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Summary:
Before this fix, `make all` will emit full compilation command when building
object files in the third-party/folly directory even if default verbosity is
0 (AM_DEFAULT_VERBOSITY).
Test Plan (devserver):
```
$make all | tee build.log
$make check
```
Check build.log to verify.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6120
Differential Revision: D18795621
Pulled By: riversand963
fbshipit-source-id: 04641a8359cd4fd55034e6e797ed85de29ee2fe2
Summary:
Add the jni library for musl-libc, specifically for incorporating into Alpine based docker images. The classifier is `musl64`.
I have signed the CLA electronically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3143
Differential Revision: D18719372
fbshipit-source-id: 6189d149310b6436d6def7d808566b0234b23313
Summary:
**NOTE**: This also needs to be back-ported to be 6.4.6
Fix a regression introduced in f2bf0b2 by https://github.com/facebook/rocksdb/pull/5674 whereby the compiled library would get the wrong name on PPC64LE platforms.
On PPC64LE, the regression caused the library to be named `librocksdbjni-linux64.so` instead of `librocksdbjni-linux-ppc64le.so`.
This PR corrects the name back to `librocksdbjni-linux-ppc64le.so` and also corrects the ordering of conditional arguments in the Makefile to match the expected order as defined in the documentation for Make.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6080
Differential Revision: D18710351
fbshipit-source-id: d4db87ef378263b57de7f9edce1b7d15644cf9de
Summary:
* We can reuse downloaded 3rd-party libraries
* We can isolate the build to a Docker volume. This is useful for investigating failed builds, as we can examine the volume by assigning it a name during the build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6079
Differential Revision: D18710263
fbshipit-source-id: 93f456ba44b49e48941c43b0c4d53995ecc1f404
Summary:
Had complications with LITE build and valgrind test.
Reverts/fixes small parts of PR https://github.com/facebook/rocksdb/issues/6007
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6036
Test Plan:
make LITE=1 all check
and
ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 make -j24 db_bloom_filter_test && ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 ./db_bloom_filter_test
Differential Revision: D18512238
Pulled By: pdillinger
fbshipit-source-id: 37213cf0d309edf11c483fb4b2fb6c02c2cf2b28
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
From bzip2's official [download page](http://www.bzip.org/downloads.html), we could download it from sourceforge. This source would be more credible than previous web archive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5995
Differential Revision: D18377662
fbshipit-source-id: e8353f83d5d6ea6067f78208b7bfb7f0d5b49c05
Summary:
include db_stress_tool in rocksdb tools lib
Test Plan (on devserver):
```
$make db_stress
$./db_stress
$make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5950
Differential Revision: D18044399
Pulled By: riversand963
fbshipit-source-id: 895585abbbdfd8b954965921dba4b1400b7af1b1
Summary:
expose db stress test by providing db_stress_tool.h in public header.
This PR does the following:
- adds a new header, db_stress_tool.h, in include/rocksdb/
- renames db_stress.cc to db_stress_tool.cc
- adds a db_stress.cc which simply invokes a test function.
- update Makefile accordingly.
Test Plan (dev server):
```
make db_stress
./db_stress
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5937
Differential Revision: D17997647
Pulled By: riversand963
fbshipit-source-id: 1a8d9994f89ce198935566756947c518f0052410
Summary:
Example: using the tool before and after PR https://github.com/facebook/rocksdb/issues/5784 shows that
the refactoring, presumed performance-neutral, actually sped up SST
filters by about 3% to 8% (repeatable result):
Before:
- Dry run ns/op: 22.4725
- Single filter ns/op: 51.1078
- Random filter ns/op: 120.133
After:
+ Dry run ns/op: 22.2301
+ Single filter run ns/op: 47.4313
+ Random filter ns/op: 115.9
Only tests filters for the block-based table (full filters and
partitioned filters - same implementation; not block-based filters),
which seems to be the recommended format/implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5825
Differential Revision: D17804987
Pulled By: pdillinger
fbshipit-source-id: 0f18a9c254c57f7866030d03e7fa4ba503bac3c5
Summary:
Make class ObsoleteFilesTest inherit from DBTestBase.
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make obsolete_files_test
$./obsolete_files_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5820
Differential Revision: D17452348
Pulled By: riversand963
fbshipit-source-id: b09f4581a18022ca2bfd79f2836c0bf7083f5f25
Summary:
Refactoring to consolidate implementation details of legacy
Bloom filters. This helps to organize and document some related,
obscure code.
Also added make/cpp var TEST_CACHE_LINE_SIZE so that it's easy to
compile and run unit tests for non-native cache line size. (Fixed a
related test failure in db_properties_test.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5784
Test Plan:
make check, including Recently added Bloom schema unit tests
(in ./plain_table_db_test && ./bloom_test), and including with
TEST_CACHE_LINE_SIZE=128U and TEST_CACHE_LINE_SIZE=256U. Tested the
schema tests with temporary fault injection into new implementations.
Some performance testing with modified unit tests suggest a small to moderate
improvement in speed.
Differential Revision: D17381384
Pulled By: pdillinger
fbshipit-source-id: ee42586da996798910fc45ac0b6289147f16d8df
Summary:
This will allow us to fix history by having the code changes for PR#5784 properly attributed to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5810
Differential Revision: D17400231
Pulled By: pdillinger
fbshipit-source-id: 2da8b1cdf2533cfedb35b5526eadefb38c291f09
Summary:
AtomicFlushStressTest is a powerful test, but right now we only run it for atomic_flush=true + disable_wal=true. We further extend it to the case where atomic_flush=false + disable_wal = false. All the workload generation and validation can stay the same.
Atomic flush crash test is also changed to switch between the two test scenarios. It makes the name "atomic flush crash test" out of sync from what it really does. We leave it as it is to avoid troubles with continous test set-up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5729
Test Plan: Run "CRASH_TEST_KILL_ODD=188 TEST_TMPDIR=/dev/shm/ USE_CLANG=1 make whitebox_crash_test_with_atomic_flush", observe the settings used and see it passed.
Differential Revision: D16969791
fbshipit-source-id: 56e37487000ae631e31b0100acd7bdc441c04163
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
This ports `folly::DistributedMutex` into RocksDB. The PR includes everything else needed to compile and use DistributedMutex as a component within folly. Most files are unchanged except for some portability stuff and includes.
For now, I've put this under `rocksdb/third-party`, but if there is a better folder to put this under, let me know. I also am not sure how or where to put unit tests for third-party stuff like this. It seems like gtest is included already, but I need to link with it from another third-party folder.
This also includes some other common components from folly
- folly/Optional
- folly/ScopeGuard (In particular `SCOPE_EXIT`)
- folly/synchronization/ParkingLot (A portable futex-like interface)
- folly/synchronization/AtomicNotification (The standard C++ interface for futexes)
- folly/Indestructible (For singletons that don't get destroyed without allocations)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5642
Differential Revision: D16544439
fbshipit-source-id: 179b98b5dcddc3075926d31a30f92fd064245731
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
If a test is one of parallel tests, then it should also be one of the 'tests'.
Otherwise, `make all` won't build the binaries. For examle,
```
$COMPILE_WITH_ASAN=1 make -j32 all
```
Then if you do
```
$make check
```
The second command will invoke the compilation and building for db_bloom_test
and file_reader_writer_test **without** the `COMPILE_WITH_ASAN=1`, causing the
command to fail.
Test plan (on devserver):
```
$make -j32 all
```
Verify all binaries are built so that `make check` won't have to compile any
thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5672
Differential Revision: D16655834
Pulled By: riversand963
fbshipit-source-id: 050131412b5313496f85ae3deeeeb8d28af75746
Summary:
This PR implements cache eviction using reinforcement learning. It includes two implementations:
1. An implementation of Thompson Sampling for the Bernoulli Bandit [1].
2. An implementation of LinUCB with disjoint linear models [2].
The idea is that a cache uses multiple eviction policies, e.g., MRU, LRU, and LFU. The cache learns which eviction policy is the best and uses it upon a cache miss.
Thompson Sampling is contextless and does not include any features.
LinUCB includes features such as level, block type, caller, column family id to decide which eviction policy to use.
[1] Daniel J. Russo, Benjamin Van Roy, Abbas Kazerouni, Ian Osband, and Zheng Wen. 2018. A Tutorial on Thompson Sampling. Found. Trends Mach. Learn. 11, 1 (July 2018), 1-96. DOI: https://doi.org/10.1561/2200000070
[2] Lihong Li, Wei Chu, John Langford, and Robert E. Schapire. 2010. A contextual-bandit approach to personalized news article recommendation. In Proceedings of the 19th international conference on World wide web (WWW '10). ACM, New York, NY, USA, 661-670. DOI=http://dx.doi.org/10.1145/1772690.1772758
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5610
Differential Revision: D16435067
Pulled By: HaoyuHuang
fbshipit-source-id: 6549239ae14115c01cb1e70548af9e46d8dc21bb
Summary:
This test frequently times out under TSAN; parallelizing it should fix
this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5632
Test Plan:
make check
buck test mode/dev-tsan internal_repo_rocksdb/repo:db_bloom_filter_test
Differential Revision: D16519399
Pulled By: ltamasi
fbshipit-source-id: 66e05a644d6f79c6d544255ffcf6de195d2d62fe
Summary:
current `clean` target in Makefile does not remove parallel test
binaries. Fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5629
Test Plan:
(on devserver)
Take file_reader_writer_test for instance.
```
$make -j32 file_reader_writer_test
$make clean
```
Verify that binary file 'file_reader_writer_test' is delete by `make clean`.
Differential Revision: D16513176
Pulled By: riversand963
fbshipit-source-id: 70acb9f56c928a494964121b86aacc0090f31ff6
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Crc32c Parallel computation optimization:
Algorithm comes from Intel whitepaper: [crc-iscsi-polynomial-crc32-instruction-paper](https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/crc-iscsi-polynomial-crc32-instruction-paper.pdf)
Input data is divided into three equal-sized blocks
Three parallel blocks (crc0, crc1, crc2) for 1024 Bytes
One Block: 42(BLK_LENGTH) * 8(step length: crc32c_u64) bytes
1. crc32c_test:
```
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
```
2. RocksDB benchmark: db_bench --benchmarks="crc32c"
```
Linear Arm crc32c:
crc32c: 1.005 micros/op 995133 ops/sec; 3887.2 MB/s (4096 per op)
```
```
Parallel optimization with Armv8 crypto extension:
crc32c: 0.419 micros/op 2385078 ops/sec; 9316.7 MB/s (4096 per op)
```
It gets ~2.4x speedup compared to linear Arm crc32c instructions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5494
Differential Revision: D16340806
fbshipit-source-id: 95dae9a5b646fd20a8303671d82f17b2e162e945
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
This PR adds a BlockCacheTraceSimulator that reports the miss ratios given different cache configurations. A cache configuration contains "cache_name,num_shard_bits,cache_capacities". For example, "lru, 1, 1K, 2K, 4M, 4G".
When we replay the trace, we also perform lookups and inserts on the simulated caches.
In the end, it reports the miss ratio for each tuple <cache_name, num_shard_bits, cache_capacity> in a output file.
This PR also adds a main source block_cache_trace_analyzer so that we can run the analyzer in command line.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5449
Test Plan:
Added tests for block_cache_trace_analyzer.
COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15797073
Pulled By: HaoyuHuang
fbshipit-source-id: aef0c5c2e7938f3e8b6a10d4a6a50e6928ecf408
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
This PR contains the first commit for block cache trace analyzer. It reads a block cache trace file and prints statistics of the traces.
We will extend this class to provide more functionalities.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5425
Differential Revision: D15709580
Pulled By: HaoyuHuang
fbshipit-source-id: 2f43bd2311f460ab569880819d95eeae217c20bb
Summary:
This PR adds a help class block cache tracer to read/write block cache accesses. It uses the trace reader/writer to perform this task.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5410
Differential Revision: D15612843
Pulled By: HaoyuHuang
fbshipit-source-id: f30fd1e1524355ca87db5d533a5c086728b141ea
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Cheng Chang