Summary:
Transaction multiGet convert to list-based.
RocksDB Java (non-transactional) has multiGetAsList() methods to expose multiGet(). These return a list of results. These methods replaced multiGet() methods returning an array of results, which were deprecated in Rocks 6 and are being removed in Rocks 7.
The transactional API still presents multiGet() methods returning arrays, so in Rocks 7 we replace these with multiGetAsList()methods and deprecate the multiGet() methods.
This does not require any changes to the supporting JNI/C++ code, only to the wrappers which present the Java API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9522
Reviewed By: mrambacher
Differential Revision: D34114373
Pulled By: jay-zhuang
fbshipit-source-id: cb22d6095934d951b6aee4aed3e07923d3c18007
Summary:
For RocksDB 7. Remove deprecated dispose() And as a consequence remove finalize(), which is good Modern Java hygiene.
It is extremely non-deterministic when `finalize()` is called on an object, and resource closure/recovery of underlying native/C++ objects and/or non-memory resource cannot be adequately controlled through GC finalization. The RocksDB Java/JNI interface provides and encourages the use of AutoCloseable objects with close() methods, allowing predictable disposal of resources at exit from try-with-resource blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9523
Reviewed By: mrambacher
Differential Revision: D34079843
Pulled By: jay-zhuang
fbshipit-source-id: d1f0463a89a548b5d57bfaa50154379e722d189a
Summary:
In RocksDB option new_table_reader_for_compaction_inputs has
not effect on Compaction or on the behavior of RocksDB library.
Therefore, we are removing it in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9443
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33788508
Pulled By: akankshamahajan15
fbshipit-source-id: 324ca6f12bfd019e9bd5e1b0cdac39be5c3cec7d
Summary:
Fixed all RocksJava test failures in Centos and Alpine 32 bit and 64 bit OSes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9395
Reviewed By: mrambacher
Differential Revision: D33771987
Pulled By: ajkr
fbshipit-source-id: fed91033b8df08f191ad65e1fb745a9264bbfa70
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::rate_limit_delay_max_milliseconds has been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9455
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33811664
Pulled By: hx235
fbshipit-source-id: 866859427fe710354a90f1095057f80116365ff0
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
This also removes the obsolete names BackupableDBOptions
and UtilityDB. API users must now use BackupEngineOptions and
DBWithTTL::Open. In C API, `rocksdb_backupable_db_*` is replaced
`rocksdb_backup_engine_*`. Similar renaming in Java API.
In reference to https://github.com/facebook/rocksdb/issues/9389
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9438
Test Plan: CI
Reviewed By: mrambacher
Differential Revision: D33780269
Pulled By: pdillinger
fbshipit-source-id: 4a6cfc5c1b4c78bcad790b9d3dd13c5fdf4a1fac
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
This PR moves HDFS support from RocksDB repo to a separate repo. The new (temporary?) repo
in this PR serves as an example before we finalize the decision on where and who to host hdfs support. At this point,
people can start from the example repo and fork.
Java/JNI is not included yet, and needs to be done later if necessary.
The goal is to include this commit in RocksDB 7.0 release.
Reference:
https://github.com/ajkr/dedupfs by ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9170
Test Plan:
Follow the instructions in https://github.com/riversand963/rocksdb-hdfs-env/blob/master/README.md. Build and run db_bench and db_stress.
make check
Reviewed By: ajkr
Differential Revision: D33751662
Pulled By: riversand963
fbshipit-source-id: 22b4db7f31762ed417a20239f5a08dcd1696244f
Summary:
Fixesfacebook/rocksdb#7720
Updated Makefile with flags to define target architecture when compiling/linking,
and added goal `rocksdbjavastaticosxub` to build a OS X Universal Binary native library.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9254
Reviewed By: mrambacher
Differential Revision: D33551160
Pulled By: pdillinger
fbshipit-source-id: 9ce9962e03aacf55014545a6cdf638b5b14b8fa9
Summary:
As title.
This is part of an fb-internal task.
First, remove all `using namespace` statements if applicable.
Next, utilize multiple build platforms and see if anything is broken.
Should anything become broken, fix the compilation errors with as little extra change as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9369
Test Plan:
internal build and make check
make clean && make static_lib && cd examples && make all
Reviewed By: pdillinger
Differential Revision: D33517260
Pulled By: riversand963
fbshipit-source-id: 3fc4ce6402a073421dfd9a9b2d1c79441dca7a40
Summary:
The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno.
Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file.
Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305
Test Plan:
- https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases
- https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion
- Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files
- Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`)
Reviewed By: riversand963
Differential Revision: D33182770
Pulled By: ajkr
fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d
Summary:
* Added Docker build environment for RocksJava on s390x
* Cache alignment size for s390x was incorrectly calculated on gcc 6.4.0
* Tighter control over which installed version of Java is used is required - build now correctly adheres to `JAVA_HOME` if it is set
* Alpine build scripts should be used on Alpine (previously CentOS script worked by falling through to minimal gcc version)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9321
Reviewed By: mrambacher
Differential Revision: D33259624
Pulled By: jay-zhuang
fbshipit-source-id: d791a5150581344925c3c3f9cbb9a3622d63b3b6
Summary:
Existing multiGet() in java calls multi_get_helper() which then calls DB::std::vector MultiGet(). This doesn't take advantage of io_uring.
This change adds another JNI level method that runs a parallel code path using the DB::void MultiGet(), using ByteBuffers at the JNI level. We call it multiGetDirect(). In addition to using the io_uring path, this code internally returns pinned slices which we can copy out of into our direct byte buffers; this should reduce the overall number of copies in the code path to/from Java. Some jmh benchmark runs (100k keys, 1000 key multiGet) suggest that for value sizes > 1k, we see about a 20% performance improvement, although performance is slightly reduced for small value sizes, there's a little bit more overhead in the JNI methods.
Closes https://github.com/facebook/rocksdb/issues/8407
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9224
Reviewed By: mrambacher
Differential Revision: D32951754
Pulled By: jay-zhuang
fbshipit-source-id: 1f70df7334be2b6c42a9c8f92725f67c71631690
Summary:
Looks like some fields are not copied by the copy constructor.
Please confirm if it is a real issue!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9166
Reviewed By: jay-zhuang
Differential Revision: D32532093
Pulled By: mrambacher
fbshipit-source-id: f636ef9425a530a8655947115160ae471916252b
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
**Context:**
Searching `TableProperties::properties_offsets` across the codebase reveals that internally it is only used to find the external SST file's global seqno offeset. Therefore we can narrow it down and replace this map property with a uint64_t property `external_sst_file_global_seqno_offset` to save memory usage related to table properties.
Note:
- See PR comments for discussion about potential impact on existing external usage of `TableProperties::properties_offsets`
- See PR comments for discussion on keeping external SST file global seqno's offset VS using a simple flag indicating seqno's existence.
**Summary:**
- Replaced `TableProperties::properties_offsets` with `TableProperties::external_sst_file_global_seqno_offset`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9212
Test Plan: - Relied on existing tests should be sufficient since `TableProperties::properties_offsets` existed before and should already be tested.
Reviewed By: ajkr
Differential Revision: D32665941
Pulled By: hx235
fbshipit-source-id: 718e44617346dc4f3b1276ee953e61c196277795
Summary:
Add the 3 read bytes counter to the Statistic, which will be used by storage tiering and get the information for files with different temperature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9123
Test Plan: added new testing cases.
Reviewed By: siying
Differential Revision: D32154745
Pulled By: zhichao-cao
fbshipit-source-id: b7905d6dae469a72428742364ec07b634b6f15da
Summary:
It seems that an incorrect native source file entry was introduced in https://github.com/facebook/rocksdb/pull/8999. For some reason it appears that CI was not run against that PR, and so the problem was not detected.
This PR fixes the problem by removing the invalid entry, allowing RocksJava to build correctly again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9147
Reviewed By: pdillinger
Differential Revision: D32300976
fbshipit-source-id: dbd763b806bacf0fc08f4deaf07c63d0a266c4cf
Summary:
Add clarification/extension to comments on max_total_wal_size and the Java wrapper MaxTotalWalSize to better explain the effect of the option on log file sizes.
Closes https://github.com/facebook/rocksdb/issues/5789
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9108
Reviewed By: pdillinger
Differential Revision: D32066640
Pulled By: mrambacher
fbshipit-source-id: 7d5affc87e4119019054af9c884a2ea01d68f5b7
Summary:
closes https://github.com/facebook/rocksdb/issues/5891
closes https://github.com/facebook/rocksdb/issues/2001
Java BytewiseComparator is now unsigned compliant, consistent with the default C++ comparator, which has always been thus. Consequently 2 tickets reporting the previous broken state can be closed.
This test confirms that the following issues were in fact resolved
by a change made between 6.2.2 and 6.22.1,
to wit https://github.com/facebook/rocksdb/commit/7242dae7
which as part of its effect, changed the Java bytewise comparators.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9019
Reviewed By: pdillinger
Differential Revision: D31610910
Pulled By: mrambacher
fbshipit-source-id: 664230f1377a1aa270136edd63eea2c206b907e9
Summary:
https://github.com/facebook/rocksdb/pull/7898 enable write buffer manager to stall write when memory_usage exceeds buffer_size, this is really useful for container running case to limit the memory usage. However, this feature is not visiable for rocksJava yet.
This PR targets to introduce this feature for rocksJava.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9076
Reviewed By: akankshamahajan15
Differential Revision: D31931092
Pulled By: anand1976
fbshipit-source-id: 5531c16a87598663a02368c07b5e13a503164578
Summary:
This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in.
There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with?
1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package
2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image
Not sure if there is more required for travis. Happy to help in any way I can.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962
Reviewed By: mrambacher
Differential Revision: D31802198
Pulled By: pdillinger
fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2
Summary:
Implementation of https://github.com/facebook/rocksdb/issues/8221, plus/including extension of Java options API to allow the get() of options from RocksDB. The extension allows more comprehensive testing of options at the Java side, by validating that the options are set at the C++ side.
Variations on methods:
MutableColumnFamilyOptions.MutableColumnFamilyOptionsBuilder getOptions()
MutableDBOptions.MutableDBOptionsBuilder getDBOptions()
retrieve the options via RocksDB C++ interfaces, and parse the resulting string into one of the Java-style option objects.
This necessitated generalising the parsing of option strings in Java, which now parses the full range of option strings returned by the C++ interface, rather than a useful subset. This necessitates the list-separator being changed to :(colon) from , (comma).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8999
Reviewed By: jay-zhuang
Differential Revision: D31655487
Pulled By: ltamasi
fbshipit-source-id: c38e98145c81c61dc38238b0df580db176ce4efd
Summary:
closes https://github.com/facebook/rocksdb/issues/8039
Unnecessary use of multiple local JNI references at the same time, 1 per key, was limiting the size of the key array. The local references don't need to be held simultaneously, so if we rearrange the code we can make it work for bigger key arrays.
Incidentally, make errors throw helpful exception messages rather than returning a null pointer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9012
Reviewed By: mrambacher
Differential Revision: D31580862
Pulled By: jay-zhuang
fbshipit-source-id: ce05831d52ede332e1b20e74d2dc621d219b9616
Summary:
* Don't hardcode namespace rocksdb (use ROCKSDB_NAMESPACE)
* Don't #include <rocksdb/...> (use double quotes)
* Support putting NOCOMMIT (any case) in source code that should not be
committed/pushed in current state.
These will be run with `make check` and in GitHub actions
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8821
Test Plan: existing tests, manually try out new checks
Reviewed By: zhichao-cao
Differential Revision: D30791726
Pulled By: pdillinger
fbshipit-source-id: 399c883f312be24d9e55c58951d4013e18429d92
Summary:
Gets `Statistics` from the options associated with the `DB` undergoing backup, and populates new ticker stats with the thread-local `IOContext` read/write counters for the threads doing backup work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8819
Reviewed By: pdillinger
Differential Revision: D30779238
Pulled By: ajkr
fbshipit-source-id: 75ccafc355f90906df5cf80367f7245b985772d8
Summary:
- Clarified some comments on compatibility for adding new ticker stats
- Added read I/O stats for `VerifyChecksum()` and `VerifyFileChecksums()` APIs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8741
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D30708578
Pulled By: ajkr
fbshipit-source-id: d06b961f7e199ae92c266b683e39870aa8f63449
Summary:
* FullKey and ParseFullKey appear to serve no purpose in the public API
(or anything else) so removed. Only use in one test updated.
* NumberToString serves no purpose vs. ToString so removed, numerous
calls updated
* Remove unnecessary forward declarations in metadata.h by re-arranging
class definitions.
* Remove some unneeded semicolons
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736
Test Plan: existing tests
Reviewed By: mrambacher
Differential Revision: D30700039
Pulled By: pdillinger
fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2
Summary:
Add a stat for secondary cache hits. The ```Cache::Lookup``` API had an unused ```stats``` parameter. This PR uses that to pass the pointer to a ```Statistics``` object that ```LRUCache``` uses to record the stat.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8666
Test Plan: Update a unit test in lru_cache_test
Reviewed By: zhichao-cao
Differential Revision: D30353816
Pulled By: anand1976
fbshipit-source-id: 2046f78b460428877a26ffdd2bb914ae47dfbe77
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
By default, the low priority pool is not the flush pool, so calling `Env#setBackgroundThreads` without providing a priority will not do what the caller expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8576
Reviewed By: ajkr
Differential Revision: D29925154
Pulled By: mrambacher
fbshipit-source-id: cd7211fc374e7d9929a9b88ea0a5ba8134b76099
Summary:
An arbitrary string can be used as a delimiter in StringAppend merge operator
flavor. In particular, it allows using an empty string, combining binary values for
the same key byte-to-byte one next to another.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8536
Reviewed By: mrambacher
Differential Revision: D29962120
Pulled By: zhichao-cao
fbshipit-source-id: 4ef5d846a47835cf428a11200409e30e2dbffc4f
