Summary:
Added a new option `max_total_wal_size`. Once the total WAL size goes over that, we make an attempt to flush all column families that still have data in the earliest WAL file.
By default, I calculate `max_total_wal_size` dynamically, that should be good-enough for non-advanced customers.
Test Plan: Added a test
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18345
Summary:
= Major Changes =
* Add a new mem-table representation, HashCuckooRep, which is based cuckoo hash.
Cuckoo hash uses multiple hash functions. This allows each key to have multiple
possible locations in the mem-table.
- Put: When insert a key, it will try to find whether one of its possible
locations is vacant and store the key. If none of its possible
locations are available, then it will kick out a victim key and
store at that location. The kicked-out victim key will then be
stored at a vacant space of its possible locations or kick-out
another victim. In this diff, the kick-out path (known as
cuckoo-path) is found using BFS, which guarantees to be the shortest.
- Get: Simply tries all possible locations of a key --- this guarantees
worst-case constant time complexity.
- Time complexity: O(1) for Get, and average O(1) for Put if the
fullness of the mem-table is below 80%.
- Default using two hash functions, the number of hash functions used
by the cuckoo-hash may dynamically increase if it fails to find a
short-enough kick-out path.
- Currently, HashCuckooRep does not support iteration and snapshots,
as our current main purpose of this is to optimize point access.
= Minor Changes =
* Add IsSnapshotSupported() to DB to indicate whether the current DB
supports snapshots. If it returns false, then DB::GetSnapshot() will
always return nullptr.
Test Plan:
Run existing tests. Will develop a test specifically for cuckoo hash in
the next diff.
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb, dhruba, igor
Differential Revision: https://reviews.facebook.net/D16155
Summary:
ReadFirstRecord() reads the actual log file from disk on every call. This diff introduces a cache layer on top of ReadFirstRecord(), which should significantly speed up repeated calls to GetUpdatesSince().
I also cleaned up some stuff, but the whole TransactionLogIterator could use some refactoring, especially if we see increased usage.
Test Plan: make check
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18387
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary: As summary. Add two autovectors that get filled up in MakeRoomForWrite and they get deleted outside of mutex
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18249
Summary:
Now that we have column families involved, we need to add extra context to every log message. They now start with "[column family name] log message"
Also added some logging that I think would be useful, like level summary after every flush (I often needed that when going through the logs).
Test Plan: make check + ran db_bench to confirm I'm happy with log output
Reviewers: dhruba, haobo, ljin, yhchiang, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18303
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary: Current behavior of creating new DB is, if there is existing log files, we will go ahead and replay them on top of empty DB. This is a behavior that no user would expect. With this patch, we will fail the creation if a user creates a DB with existing log files.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: haobo
CC: nkg-, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17817
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
With multiple column families, especially when manual Flush is executed, we might roll the log file, although the current log file is empty (no data has been written to the log).
After the diff, we won't create new log file if current is empty.
Next, I will write an algorithm that will flush column families that reference old log files (i.e., that weren't flushed in a while)
Test Plan: Added an unit test. Confirmed that unit test failes in master
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17631
Summary:
replace the super version acquisision in tailing itrator with thread
local
Test Plan: will post results
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17757
Summary:
Similar to GetImp(), use SuperVersion from thread local instead of acquriing mutex.
I don't expect this change will make a dent on NewIterator() performance
because the bottleneck seems to be on the rest part of the API
Test Plan:
make asan_check
will post perf numbers
Reviewers: haobo, igor, sdong, dhruba, yhchiang
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17643
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary:
1. Polish IterKey a little bit.
2. Turn to use it in local parameter of current_user_key in DBImpl::ProcessKeyValueCompaction(). Our profile showing that DBImpl::ProcessKeyValueCompaction() has about 14% costs in std::string (the base including reading and writing data but excluding compaction filtering), which is higher than it should be. There are two std::string used in DBImpl::ProcessKeyValueCompaction(), compaction_filter_value and current_user_key and it's hard to distinguish the two.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17613
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary: ToString() is expensive. Profiling shows that most compaction threads are stuck in jemalloc, allocating a new string. This will help out a litte.
Test Plan: make check
Reviewers: haobo, danguo
Reviewed By: danguo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17583
Summary: This will allow us to disable them completely for iOS or for better performance
Test Plan: will run make all check
Reviewers: igor, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17511
Summary: If a client specifies wal_dir with trailing '/', we will fail in deleting obsolete log files. See task #4083746
Test Plan: make check
Reviewers: haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17535
Summary: Our measurement shows that sometimes new log::Write's constructor can take hundreds of milliseconds. It's unclear why but just simply move it out of DB mutex.
Test Plan: make all check
Reviewers: haobo, ljin, igor
Reviewed By: haobo
CC: nkg-, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17487
Summary: Flushing log buffer earlier to avoid confusion of time holding the locks.
Test Plan: Should be safe as long as several related db test passes
Reviewers: haobo, igor, ljin
Reviewed By: igor
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17493
Summary: Move several some common logging still in DB mutex to log buffer.
Test Plan: make all check
Reviewers: haobo, igor, ljin, nkg-
Reviewed By: nkg-
CC: nkg-, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17439
Summary: This patch fixed a race condition where a log file is moved to archived dir in the middle of GetSortedWalFiles. Without the fix, the log file would be missed in the result, which leads to transaction log iterator gap. A test utility SyncPoint is added to help reproducing the race condition.
Test Plan: TransactionLogIteratorRace; make check
Reviewers: dhruba, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17121
Summary: As we know, logging can be slow, or even hang for some file systems. Move one more logging out of DB mutex.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: igor
CC: yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17427
Summary: The previous change D15087 changed existing compaction filter, which makes the commonly used class not backward compatible. Revert the older interface. Use a new interface for V2 instead.
Test Plan: make all check
Reviewers: haobo, yhchiang, igor
CC: danguo, dhruba, ljin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17223
Summary: Talked to <insert internal project name> folks and they found it really scary that they won't be able to roll back once they upgrade to 2.8. We should fix this.
Test Plan: make check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17343
Summary:
NewFixedPrefixTransform is leaked in default options. Broken by b47812fba6
Also included in the diff some code cleanup
Test Plan:
valgrind env_test
also make check
Reviewers: haobo, danguo, yhchiang
Reviewed By: danguo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17211
Summary:
AssertHeld() was a no-op before. Now it does things.
Also, this change caught a bad bug in SuperVersion::Init(). The method is calling db->mutex.AssertHeld(), but db variable is not initialized yet! I also fixed that issue.
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17193
Summary:
Currently if client uses kNULLString as the prefix, it will confuse
compaction filter v2. This diff added a bool to indicate if the prefix
has been intialized. I also added a unit test to cover this case and
make sure the new code path is hit.
Test Plan: db_test
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17151
Summary:
This diff adds a new CompactionFilterV2 API that roll up the
decisions of kv pairs during compactions. These kv pairs must share the
same key prefix. They are buffered inside the db.
typedef std::vector<Slice> SliceVector;
virtual std::vector<bool> Filter(int level,
const SliceVector& keys,
const SliceVector& existing_values,
std::vector<std::string>* new_values,
std::vector<bool>* values_changed
) const = 0;
Application can override the Filter() function to operate
on the buffered kv pairs. More details in the inline documentation.
Test Plan:
make check. Added unit tests to make sure Keep, Delete,
Change all works.
Reviewers: haobo
CCs: leveldb
Differential Revision: https://reviews.facebook.net/D15087
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
includes necessary changes such as updating the pure C api for
partial merge.
Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
operands.
TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.
Reviewers: haobo, igor, vamsi
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16815
Summary:
Everytime a client opens a DB, we do a sanity check that:
* checks the existance of all the necessary files
* verifies that file sizes are correct
Some of the code was stolen from https://reviews.facebook.net/D16935
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17097
Summary:
Whenever we get an IOError from GetImpl() or NewIterator(), we should immediatelly mark the DB read-only. The same check already exists in Write() and Compaction().
This should help with clients that are somehow missing a file.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17061
Igor Canadi