Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
We have a lot of confusing code because of mixed, sometimes
completely opposite uses of of the term "raw block" or "raw contents",
sometimes within the same source file. For example, in `BlockBasedTableBuilder`,
`raw_block_contents` and `raw_size` generally referred to uncompressed block
contents and size, while `WriteRawBlock` referred to writing a block that
is already compressed if it is going to be. Meanwhile, in
`BlockBasedTable`, `raw_block_contents` either referred to a (maybe
compressed) block with trailer, or a maybe compressed block maybe
without trailer. (Note: left as follow-up work to use C++ typing to
better sort out the various kinds of BlockContents.)
This change primarily tries to apply some consistent terminology around
the kinds of block representations, avoiding the unclear "raw". (Any
meaning of "raw" assumes some bias toward the storage layer or toward
the logical data layer.) Preferred terminology:
* **Serialized block** - bytes that go into storage. For block-based table
(usually the case) this includes the block trailer. WART: block `size` may or
may not include the trailer; need to be clear about whether it does or not.
* **Maybe compressed block** - like a serialized block, but without the
trailer (or no promise of including a trailer). Must be accompanied by a
CompressionType.
* **Uncompressed block** - "payload" bytes that are either stored with no
compression, used as input to compression function, or result of
decompression function.
* **Parsed block** - an in-memory form of a block in block cache, as it is
used by the table reader. Different C++ types are used depending on the
block type (see block_like_traits.h).
Other refactorings:
* Misc corrections/improvements of internal API comments
* Remove a few misleading / unhelpful / redundant comments.
* Use move semantics in some places to simplify contracts
* Use better parameter names to indicate which parameters are used for
outputs
* Remove some extraneous `extern`
* Various clean-ups to `CacheDumperImpl` (mostly unnecessary code)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10408
Test Plan: existing tests
Reviewed By: akankshamahajan15
Differential Revision: D38172617
Pulled By: pdillinger
fbshipit-source-id: ccb99299f324ac5ca46996d34c5089621a4f260c
Summary:
The RocksDB iterator is a hierarchy of iterators. MergingIterator maintains a heap of LevelIterators, one for each L0 file and for each non-zero level. The Seek() operation naturally lends itself to parallelization, as it involves positioning every LevelIterator on the correct data block in the correct SST file. It lookups a level for a target key, to find the first key that's >= the target key. This typically involves reading one data block that is likely to contain the target key, and scan forward to find the first valid key. The forward scan may read more data blocks. In order to find the right data block, the iterator may read some metadata blocks (required for opening a file and searching the index).
This flow can be parallelized.
Design: Seek will be called two times under async_io option. First seek will send asynchronous request to prefetch the data blocks at each level and second seek will follow the normal flow and in FilePrefetchBuffer::TryReadFromCacheAsync it will wait for the Poll() to get the results and add the iterator to min_heap.
- Status::TryAgain is passed down from FilePrefetchBuffer::PrefetchAsync to block_iter_.Status indicating asynchronous request has been submitted.
- If for some reason asynchronous request returns error in submitting the request, it will fallback to sequential reading of blocks in one pass.
- If the data already exists in prefetch_buffer, it will return the data without prefetching further and it will be treated as single pass of seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9994
Test Plan:
- **Run Regressions.**
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
i) Previous release 7.0 run for normal prefetching with async_io disabled:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Set seed to 1652922591315307 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:09:51 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483080.466 micros/op 2 ops/sec 120.287 seconds 249 operations; 340.8 MB/s (249 of 249 found)
```
iii) db_bench with async_io enabled completed succesfully
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 -async_io=1 -adaptive_readahead=1
Set seed to 1652924062021732 because --seed was 0
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.3
Date: Wed May 18 18:34:22 2022
CPU: 32 * Intel Xeon Processor (Skylake)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 553913.576 micros/op 1 ops/sec 120.199 seconds 217 operations; 293.6 MB/s (217 of 217 found)
```
- db_stress with async_io disabled completed succesfully
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
I**n Progress**: db_stress with async_io is failing and working on debugging/fixing it.
Reviewed By: anand1976
Differential Revision: D36459323
Pulled By: akankshamahajan15
fbshipit-source-id: abb1cd944abe712bae3986ae5b16704b3338917c
Summary:
I'm working on a new format_version=6 to support context
checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test
updates to support that change.
Test coverage data and manual inspection agree on dead code in
block_based_table_reader.cc (removed).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240
Test Plan:
tests enhanced to cover more cases etc.
Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible.
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true}
(Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness)
Before w/ wal: 454512
After w/ wal: 444820 (-2.1%)
Before w/o wal: 1004560
After w/o wal: 998897 (-0.6%)
Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case.
This regression will be corrected in a follow-up PR.
Reviewed By: ajkr
Differential Revision: D32813769
Pulled By: pdillinger
fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
To propagate the IOStatus from file reads to RocksDB read logic, some of the existing status needs to be replaced by IOStatus.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8130
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D27440188
Pulled By: zhichao-cao
fbshipit-source-id: bbe7622c2106fe4e46871d60f7c26944e5030d78
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Fix block based table reader not using memory_allocator when allocating index blocks and compression dictionary blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4678
Differential Revision: D13054594
Pulled By: yiwu-arbug
fbshipit-source-id: 379f25bcc665395662511c4f873f4b7b55104ce2
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
Some call sites of BlockFetcher create temporary ReadOptions and pass to BlockFetcher. The temporary object will be gone after BlockFetcher construction but BlockFetcher keep its reference, causing stack-use-after-scope. Fixing it.
Closes https://github.com/facebook/rocksdb/pull/3258
Differential Revision: D6547152
Pulled By: yiwu-arbug
fbshipit-source-id: 6b49e9dd46bb72307f5d8f88ea15faacff35b9bc
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Peter Dillinger