Summary:
Since https://github.com/facebook/rocksdb/issues/5468 `LevelIterator` compare lower bound and file smallest key on `NewFileIterator` and cache the result to reduce per key lower bound check. However when iterate across file boundary, it doesn't update the cached result since `Valid()=false` because `Valid()` still reflect the status of the previous file iterator. Fixing it by remove the `Valid()` check from `CheckMayBeOutOfLowerBound()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5540
Test Plan:
See the new test.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D16127653
fbshipit-source-id: a0691e1164658d485c17971aaa97028812f74678
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
When reseek happens in merging iterator, reseeking a child iterator can be avoided if:
(1) the iterator represents imutable data
(2) reseek() to a larger key than the current key
(3) the current key of the child iterator is larger than the seek key
because it is guaranteed that the result will fall into the same position.
This optimization will be useful for use cases where users keep seeking to keys nearby in ascending order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5286
Differential Revision: D15283635
Pulled By: siying
fbshipit-source-id: 35f79ffd5ce3609146faa8cd55f2bfd733502f83
Summary:
Right now, when Seek() is called again, RocksDB always does a binary search against the files and index blocks, even if they end up with the same file/block. Improve it as following:
1. in LevelIterator, reseek first try to check the boundary of the current file. If it falls into the same file, skip the binary search to find the file
2. in block based table iterator, reseek skip to reseek the iterator block if the seek key is larger than the current key and lower than the index key (boundary of the current block and the next block).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5256
Differential Revision: D15105072
Pulled By: siying
fbshipit-source-id: 39634bdb4a881082451fa39cecd7ecf12160bf80
Summary:
Improve the iterators performance when the user explicitly sets the readahead size via `ReadOptions.readahead_size`.
1. Stop creating new table readers when the user explicitly sets readahead size.
2. Make use of an internal buffer based on `FilePrefetchBuffer` instead of using `ReadaheadRandomAccessFileReader`, to handle the user readahead requests (for both buffered and direct io cases).
3. Add `readahead_size` to db_bench.
**Benchmarks:**
https://gist.github.com/sagar0/53693edc320a18abeaeca94ca32f5737
For 1 MB readahead, Buffered IO performance improves by 28% and Direct IO performance improves by 50%.
For 512KB readahead, Buffered IO performance improves by 30% and Direct IO performance improves by 67%.
**Test Plan:**
Updated `DBIteratorTest.ReadAhead` test to make sure that:
- no new table readers are created for iterators on setting ReadOptions.readahead_size
- At least "readahead" number of bytes are actually getting read on each iterator read.
TODO later:
- Use similar logic for compactions as well.
- This ties in nicely with #4052 and paves the way for removing ReadaheadRandomAcessFile later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5246
Differential Revision: D15107946
Pulled By: sagar0
fbshipit-source-id: 2c1149729ca7d779e4e8b7710ba6f4e8cbfd3bea
Summary:
This is second attempt for #5101. Original commit message:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
This patch come with two fixes:
Fix 1: To optimize checking for bounds, we need comparing the bounds with index key as well. However BlockBasedTableIterator doesn't know whether its index iterator is internally using user keys or internal keys. The patch fixes that by extending InternalIterator with a user_key() function that is overridden by In IndexBlockIter.
Fix 2: In #5101 we return `IsOutOfBound()=true` when block index key is out of bound. But the index key can be larger than smallest key of the next file on the level. That file can be within upper bound and should not be filtered out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5142
Differential Revision: D14907113
Pulled By: siying
fbshipit-source-id: ac95775c5b4e7b700f76ab43e39f45402c98fbfb
Summary:
The ReadCallback was shared between all threads in IteratorWithLocalStatistics. A race condition was
hence introduced with recent changes that changes the content of ReadCallback. The patch fixes that by using a separate callback per thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5149
Differential Revision: D14761612
Pulled By: maysamyabandeh
fbshipit-source-id: 814a316aed046c318cb90e22379a6e32ac528949
Summary:
This PR address two open issues:
1. clang analyzer is paranoid about db_ being nullptr after DB::Open calls in the test.
See https://github.com/facebook/rocksdb/pull/5043#discussion_r271394579
Add an assert to keep clang happy
2. PR https://github.com/facebook/rocksdb/pull/5049 introduced a variable shadowing:
```
db/db_iterator_test.cc: In constructor ‘rocksdb::DBIteratorWithReadCallbackTest_ReadCallback_Test::TestBody()::TestReadCallback::TestReadCallback(rocksdb::SequenceNumber)’:
db/db_iterator_test.cc:2484:9: error: declaration of ‘max_visible_seq’ shadows a member of 'this' [-Werror=shadow]
: ReadCallback(max_visible_seq) {}
^
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5140
Differential Revision: D14735497
Pulled By: miasantreble
fbshipit-source-id: 3219ea75cf4ae04f64d889323f6779e84be98144
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
This reverts commit f29dc1b906.
In BlockBasedTableIterator, index_iter_->key() is sometimes a user key, so it is wrong to call ExtractUserKey() against it. This is a bug introduced by #5101.
Temporarily revert the diff to keep the branch clean.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5132
Differential Revision: D14718584
Pulled By: siying
fbshipit-source-id: 0ac55dc9b5dbc18c7809092146bdf7eb9364b9ad
Summary:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5101
Differential Revision: D14678707
Pulled By: siying
fbshipit-source-id: 2372446116753c7892ea4cec7b4b49ef87ba463e
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
We haven't been populating `NO_FILE_CLOSES` since v1.5.8 even though it was never marked as deprecated. Start populating it again. Conveniently `DeleteTableReader` has an unused `void*` argument that we can use...
Blame: 63f216ee0aCloses#4700.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4703
Differential Revision: D13146769
Pulled By: ajkr
fbshipit-source-id: ad8d6fb0493e701f60a165a3bca1787d255be008
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
In the current trace_and replay, Get an WriteBatch are traced. This pull request track down the Seek() and SeekForPrev() to the trace file. <target_key, timestamp, column_family_id> are write to the file.
Replay of Iterator is not supported in the current implementation.
Tested with trace_analyzer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4228
Differential Revision: D9201381
Pulled By: zhichao-cao
fbshipit-source-id: 6f9cc9cb3c20260af741bee065ec35c5c96354ab
Summary:
92ee3350e0 introduces an out-of-bound check in BlockBasedTableIterator::Valid(). However, this flag is not reset when re-seeking in backward direction. This caused the iterator to be invalide by mistake. Fix it by always resetting the out-of-bound flag in every seek.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4187
Differential Revision: D8996600
Pulled By: siying
fbshipit-source-id: b6235ea614f71381e50e7904c4fb036300604ac1
Summary:
with https://github.com/facebook/rocksdb/pull/3601 and https://github.com/facebook/rocksdb/pull/3899, `prefix_extractor_` is not really being used in block based filter and full filter's version of `PrefixMayMatch` because now `prefix_extractor` is passed as an argument. Also it is now possible that prefix_extractor_ may be initialized to nullptr when a non-standard prefix_extractor is used and also for ROCKSDB_LITE. Removing these checks should not break any existing tests.
Closes https://github.com/facebook/rocksdb/pull/4067
Differential Revision: D8669002
Pulled By: miasantreble
fbshipit-source-id: 0e701ba912b8a26734fadb72d15bb1b266b6176a
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Summary:
b555ed30a4 makes the BlockBasedTableIterator to be invalidated if the current position if over the upper bound. However, this can bring performance regression to the case of multiple Seek()s hitting the same data block but all out of upper bound.
For example, if an SST file has a data block containing following keys : {a, z}
The user sets the upper bound to be "x", and it executed following queries:
Seek("b")
Seek("c")
Seek("d")
Before the upper bound optimization, these queries always come to this same current data block of the iterator, but now inside each Seek() the data block is read from the block cache but is returned again.
To prevent this regression case, we keep the current data block iterator if it is upper bound.
Closes https://github.com/facebook/rocksdb/pull/4004
Differential Revision: D8463192
Pulled By: siying
fbshipit-source-id: 8710628b30acde7063a097c3184d6c4333a8ef81
Summary:
A recent change pushed down the upper bound checking to child iterators. However, this causes the logic of following sequence wrong:
Seek(key);
if (!Valid()) SeekToLast();
Because !Valid() may be caused by upper bounds, rather than the end of the iterator. In this case SeekToLast() points to totally wrong places. This can cause wrong results, infinite loops, or segfault in some cases.
This sequence is called when changing direction from forward to backward. And this by itself also implicitly happen during reseeking optimization in Prev().
Fix this bug by using SeekForPrev() rather than this sequuence, as what is already done in prefix extrator case.
Closes https://github.com/facebook/rocksdb/pull/3989
Differential Revision: D8385422
Pulled By: siying
fbshipit-source-id: 429e869990cfd2dc389421e0836fc496bed67bb4
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
Added a new iterator property: `rocksdb.iterator.internal-key` to get the internal-key (converted to user key) at which the iterator stopped.
Closes https://github.com/facebook/rocksdb/pull/3525
Differential Revision: D7033694
Pulled By: sagar0
fbshipit-source-id: d51e6c00f5e9d766c6276ef79774b81c6c5216f8
Summary:
Update compaction_iterator_test with write-prepared transaction DB related tests. Transaction related tests are group in CompactionIteratorWithSnapshotCheckerTest. The existing test are duplicated to make them also test with dummy SnapshotChecker that will say every key is visible to every snapshot (this is okay, we still compare sequence number to verify visibility). Merge related tests are disabled and will be revisit in another PR.
Existing db_iterator_tests are also duplicated to test with dummy read_callback that will say every key is committed.
Closes https://github.com/facebook/rocksdb/pull/3466
Differential Revision: D6909253
Pulled By: yiwu-arbug
fbshipit-source-id: 2ae4656b843a55e2e9ff8beecf21f2832f96cd25
Summary:
In DBIter, Prev() calls FindValueForCurrentKey() to search the current value backward. If it finds that there are too many stale value being skipped, it falls back to FindValueForCurrentKeyUsingSeek(), seeking directly to the key with snapshot sequence. After introducing read_callback, however, the key it seeks to might not be visible, according to read_callback. It thus needs to keep searching forward until the first visible value.
Closes https://github.com/facebook/rocksdb/pull/3382
Differential Revision: D6756148
Pulled By: yiwu-arbug
fbshipit-source-id: 064e39b1eec5e083af1c10142600f26d1d2697be
Summary:
When Seek a key less than `lower_bound`, should return `lower_bound`.
ajkr PTAL
Closes https://github.com/facebook/rocksdb/pull/3199
Differential Revision: D6421126
Pulled By: ajkr
fbshipit-source-id: a06c825830573e0040630704f6bcb3f7f48626f7
Summary:
This diff adds a new ticker stat, NUMBER_ITER_SKIP, to count the
number of internal keys skipped during iteration. Keys can be skipped
due to deletes, or lower sequence number, or higher sequence number
than the one requested.
Also, fix the issue when StatisticsData is naturally aligned on cacheline boundary,
padding becomes a zero size array, which the Windows compiler doesn't
like. So add a cacheline worth of padding in that case to keep it happy.
We cannot conditionally add padding as gcc doesn't allow using sizeof
in preprocessor directives.
Closes https://github.com/facebook/rocksdb/pull/3177
Differential Revision: D6353897
Pulled By: anand1976
fbshipit-source-id: 441d5a09af9c4e22e7355242dfc0c7b27aa0a6c2
Summary:
The test currently times out when it is run under tsan. This patch split it into 4 tests.
Closes https://github.com/facebook/rocksdb/pull/3047
Differential Revision: D6106515
Pulled By: maysamyabandeh
fbshipit-source-id: 03a28cdf8b1c097be2361b1b0cc3dc1acf2b5d63
Summary:
As discussed on the mailing list (["Skipping entire SSTs while iterating"](https://groups.google.com/forum/#!topic/rocksdb/ujHCJVLrHlU)), this patch adds a `table_filter` to `ReadOptions` that allows specifying a callback to be executed during iteration before each table in the database is scanned. The callback is passed the table's properties; the table is scanned iff the callback returns true.
This can be used in conjunction with a `TablePropertiesCollector` to dramatically speed up scans by skipping tables that are known to contain irrelevant data for the scan at hand.
We're using this [downstream in CockroachDB](https://github.com/cockroachdb/cockroach/blob/master/pkg/storage/engine/db.cc#L2009-L2022) already. With this feature, under ideal conditions, we can reduce the time of an incremental backup in from hours to seconds.
FYI, the first commit in this PR fixes a segfault that I unfortunately have not figured out how to reproduce outside of CockroachDB. I'm hoping you accept it on the grounds that it is not correct to return 8-byte aligned memory from a call to `malloc` on some 64-bit platforms; one correct approach is to infer the necessary alignment from `std::max_align_t`, as done here. As noted in the first commit message, the bug is tickled by having a`std::function` in `struct ReadOptions`. That is, the following patch alone is enough to cause RocksDB to segfault when run from CockroachDB on Darwin.
```diff
--- a/include/rocksdb/options.h
+++ b/include/rocksdb/options.h
@@ -1546,6 +1546,13 @@ struct ReadOptions {
// Default: false
bool ignore_range_deletions;
+ // A callback to determine whether relevant keys for this scan exist in a
+ // given table based on the table's properties. The callback is passed the
+ // properties of each table during iteration. If the callback returns false,
+ // the table will not be scanned.
+ // Default: empty (every table will be scanned)
+ std::function<bool(const TableProperties&)> table_filter;
+
ReadOptions();
ReadOptions(bool cksum, bool cache);
};
```
/cc danhhz
Closes https://github.com/facebook/rocksdb/pull/2265
Differential Revision: D5054262
Pulled By: yiwu-arbug
fbshipit-source-id: dd6b28f2bba6cb8466250d8c5c542d3c92785476
Summary:
With this PR, we can measure read-amp for queries where perf_context is enabled as follows:
```
SetPerfLevel(kEnableCount);
Get(1, "foo");
double read_amp = static_cast<double>(get_perf_context()->block_read_byte / get_perf_context()->get_read_bytes);
SetPerfLevel(kDisable);
```
Our internal infra enables perf_context for a sampling of queries. So we'll be able to compute the read-amp for the sample set, which can give us a good estimate of read-amp.
Closes https://github.com/facebook/rocksdb/pull/2749
Differential Revision: D5647240
Pulled By: ajkr
fbshipit-source-id: ad73550b06990cf040cc4528fa885360f308ec12
Summary:
Add and implement Iterator::Refresh(). When this function is called, if the super version doesn't change, update the sequence number of the iterator to the latest one and invalidate the iterator. If the super version changed, recreated the whole iterator. This can help users reuse the iterator more easily.
Closes https://github.com/facebook/rocksdb/pull/2621
Differential Revision: D5464500
Pulled By: siying
fbshipit-source-id: f548bd35e85c1efca2ea69273802f6704eba6ba9
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
Disable direct reads for log and manifest. Direct reads should not affect sequential_file
Also add kDirectIO for option_config_ in db_test_util
Closes https://github.com/facebook/rocksdb/pull/2337
Differential Revision: D5100261
Pulled By: lightmark
fbshipit-source-id: 0ebfd13b93fa1b8f9acae514ac44f8125a05868b
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
