Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12606
The patch extends optimistic transactions and WriteCommitted pessimistic transactions with support for the `PutEntity` API. Similarly to the other APIs, `PutEntity` is available via both the `Transaction` and `TransactionDB` interfaces, where using the latter executes the write in a single-operation transaction as usual. Support for read APIs and other write policies (WritePrepared, WriteUnprepared) will be added in separate PRs.
Reviewed By: jaykorean
Differential Revision: D56911242
fbshipit-source-id: 57cf8bb6c6b1b40ba4a8a652831c13a617644289
Summary:
Previously we skipped syncing the non-latest WALs during memtable flush when the DB had only one column family. Normally that is fine because those non-latest WALs would not be read by recovery. However, in case of `DBOptions::allow_2pc == true`, there could be unmatched prepare records in those WALs making them needed by recovery. As a result, the missing sync could have resulted in the recovered WAL state falling behind the recovered SST state. When we detect that case, we return a `Status::Corruption` saying "SST file is ahead of WALs".
This PR proposes syncing the WAL in case of `DBOptions::allow_2pc`. This introduces the sync in some scenarios where it isn't needed (e.g., non-recent WALs contain no prepares) but I suspect the simplicity is worth it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12622
Reviewed By: cbi42
Differential Revision: D56987303
Pulled By: ajkr
fbshipit-source-id: 7fe9395458018a18d77e907a3b5429065c0e2e48
Summary:
This PR is a counterpart of https://github.com/facebook/rocksdb/issues/12427 . On file systems that support storage level data checksum and reconstruction, retry opening the DB if a corruption is detected when reading the MANIFEST. This could be done in `log::Reader`, but its a little complicated since the sequential file would have to be reopened in order to re-read the same data, and we may miss some subtle corruptions that don't result in checksum mismatch. The approach chosen here instead is to make the decision to retry in `DBImpl::Recover`, based on either an explicit corruption in the MANIFEST file, or missing SST files due to bad data in the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12518
Reviewed By: ajkr
Differential Revision: D55932155
Pulled By: anand1976
fbshipit-source-id: 51755a29b3eb14b9d8e98534adb2e7d54b12ced9
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12564
Similarly to how `db`, `column_family`, and `results` are handled, bail out early from `WriteBatchWithIndex::MultiGetEntityFromBatchAndDB` if `keys` is `nullptr`. Note that these checks are best effort in the sense that with the current method signature, the callee has no way of reporting an error if `statuses` is `nullptr` or catching other types of invalid pointers (e.g. when `keys` and/or `results` is non-`nullptr` but do not point to a contiguous range of `num_keys` objects). We can improve this (and many similar RocksDB APIs) using `std::span` in a major release once we move to C++20.
Reviewed By: jaykorean
Differential Revision: D56318179
fbshipit-source-id: bc7a258eda82b5f6c839f212ab824130e773a4f0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12562
The patch makes a small usability improvement by consistently resetting any user-facing wide-column structures (`DBIter::columns()`, `BaseDeltaIterator::columns()`, and any `PinnableWideColumns` objects) upon encountering any deserialization failures.
Reviewed By: jaykorean
Differential Revision: D56312764
fbshipit-source-id: 44efed0d1720cc06bf6facf928f73ce39a1bd2ca
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12539
As a follow-up to https://github.com/facebook/rocksdb/pull/12533, this PR extends `WriteBatchWithIndex` with a `MultiGetEntityFromBatchAndDB` API that enables users to perform batched wide-column point lookups with read-your-own-writes consistency. This API transparently combines data from the indexed write batch and the underlying database as needed and presents the results in the form of a wide-column entity.
Reviewed By: jaykorean
Differential Revision: D56153145
fbshipit-source-id: 537967051b7521bb41b04070ac1a78a1d8873c08
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12533
The PR extends `WriteBatchWithIndex` with a new wide-column point lookup API `GetEntityFromBatchAndDB`. Similarly to `GetFromBatchAndDB`, the new API can transparently combine data from the write batch with data from the underlying database as needed. Like `DB::GetEntity`, it returns any result in the form of a wide-column entity (i.e. plain key-values are wrapped into an entity with a single anonymous column).
Reviewed By: jaykorean
Differential Revision: D56069132
fbshipit-source-id: 4f19cdeea4ce136497ce79fc9d28c925de59e220
Summary:
Our `FileSystem` for simulating unsynced data loss should not sync during `Close()` because it masks bugs where we forgot to sync as long as we closed the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12528
Test Plan:
Peeled back https://github.com/facebook/rocksdb/issues/10560 fix and verified it is caught much faster now (few seconds vs. ???) with command like
```
$ TEST_TMPDIR=./ python3 tools/db_crashtest.py blackbox --disable_wal=0 --max_key=1000 --write_buffer_size=131072 --max_bytes_for_level_base=524288 --target_file_size_base=131072 --interval=3 --sync_fault_injection=1 --enable_blob_files=0 --manual_wal_flush_one_in=10 --sync_wal_one_in=0 --get_live_files_one_in=0 --get_sorted_wal_files_one_in=0 --backup_one_in=0 --checkpoint_one_in=0 --write_fault_one_in=0 --read_fault_one_in=0 --open_write_fault_one_in=0 --compact_range_one_in=0 --compact_files_one_in=0 --open_read_fault_one_in=0 --get_property_one_in=0 --writepercent=100 -readpercent=0 -prefixpercent=0 -delpercent=0 -delrangepercent=0 -iterpercent=0
```
Reviewed By: anand1976
Differential Revision: D56033250
Pulled By: ajkr
fbshipit-source-id: 6bbf480d79a06c46f08f6214010937f6654af5ca
Summary:
It is an important function and should be correct on legacy BlobDB, even though using legacy BlobDB is not recommended
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12468
Reviewed By: cbi42
Differential Revision: D55231038
Pulled By: ajkr
fbshipit-source-id: 2ac18e4c149590b373eb79cd92c0ca5e7fce94f2
Summary:
Without this override, `FaultInjectionTestFs` use the implementation from `FileSystemWrapper` that delegates to the base file system: 2207a66fe5/include/rocksdb/file_system.h (L1451-L1457)
That will create a regular `FSWritableFile` instead of a `TestFSWritableFile`:
2207a66fe5/env/file_system.cc (L98-L108)
We have seen verification failures with a WAL hole because the last log writer is a `FSWritableFile` created from recycling a previous log file, while the second to last log write is a `TestFSWritableFile`. The former can survive a process crash, while the latter cannot. It makes the WAL look like it has a hole.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12510
Reviewed By: hx235
Differential Revision: D55769158
Pulled By: jowlyzhang
fbshipit-source-id: ebeffee8255bfa155434e17afe5082908d41a0d1
Summary:
When we use the CreateColumnFamilyWithImport interface of PessimisticTransactionDB to create column family, the lack of related information may cause subsequent writes to be unable to find the Column Family ID.
The issue: (https://github.com/facebook/rocksdb/issues/12493)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12490
Reviewed By: jowlyzhang
Differential Revision: D55700343
Pulled By: cbi42
fbshipit-source-id: dc992a3eef433e1193d579cbf58b6ba940fa460d
Summary:
This PR adds support to programmatically iterate a raw table file with an iterator returned by `SstFileReader::NewTableIterator`. For third party tools to use to observe SST files created by RocksDB.
The original feature request was from this merge request: https://github.com/facebook/rocksdb/pull/12370
Since keys returned by raw table iterators are internal keys, this PR also adds a struct `ParsedEntryInfo` and util method `ParseEntry` to support user to parse internal key. `GetInternalKeyForSeek`, and `GetInternalKeyForSeekForPrev` to support users to create internal keys for seek operations with this raw table iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12385
Test Plan: Added unit tests
Reviewed By: cbi42
Differential Revision: D55662855
Pulled By: jowlyzhang
fbshipit-source-id: 0716a173ee95924fbd4e1f9b6cccf06525c40049
Summary:
`nullptr` is typesafe. `0` and `NULL` are not. In the future, only `nullptr` will be allowed.
This diff helps us embrace the future _now_ in service of enabling `-Wzero-as-null-pointer-constant`.
Reviewed By: dmm-fb
Differential Revision: D55559752
fbshipit-source-id: 9f1edc836ded919022c4b53722f6f86208fecf8d
Summary:
**Context/Summary:**
We recently discovered that `CompactRange(change_level=true, target_level=0)` can possibly refit more than 1 files to L0. This refitting can cause read performance regression as we need to go through every file in L0, corruption in some edge case and false positive corruption caught by force consistency check. We decided to explicitly disallow such behavior.
A related change to OptionChangeMigration():
- When migrating to FIFO with `compaction_options_fifo.max_table_files_size > 0`, RocksDB will [CompactRange() all the to-be-migrate data into a couple L0 files](https://github.com/facebook/rocksdb/blob/main/utilities/option_change_migration/option_change_migration.cc#L164-L169) to avoid dropping all the data upon migration finishes when the migrated data is larger than max_table_files_size. This is achieved by first compacting all the data into a couple non-L0 files and refitting those files from non-L0 to L0 if needed. In that way, only some data instead of all data will be dropped immediately after migration to FIFO with a max_table_files_size.
- Since this type of refitting behavior is disallowed from now on, we won't do this trick anymore and explicitly state such risk in API comment.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12481
Test Plan:
- New UT
- Modified UT
Reviewed By: cbi42
Differential Revision: D55351178
Pulled By: hx235
fbshipit-source-id: 9d8854f2f81d7e8aff859c3a4e53b7d688048e80
Summary:
Previously it was uninitialized. Setting `checksum_handoff_file_types` will cause `kCRC32c` checksums to be passed down in the `DataVerificationInfo`, so it makes sense for `kCRC32c` to be the default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12485
Test Plan:
ran `db_stress` in a way that failed before. Building with ASAN was needed to ensure the uninitialized bytes are nonzero according to `malloc_fill_byte` (default 0xbe)
```
$ COMPILE_WITH_ASAN=1 make -j28 db_stress
...
$ ./db_stress -sync_fault_injection=1 -enable_checksum_handoff=true
```
Reviewed By: jaykorean
Differential Revision: D55450587
Pulled By: ajkr
fbshipit-source-id: 53dc829b86e49b3fa80570032e83af0bb12adaad
Summary:
ScopedArenaIterator is not an iterator. It is a pointer wrapper. And we don't need a custom implemented pointer wrapper when std::unique_ptr can be instantiated with what we want.
So this adds ScopedArenaPtr<T> to replace those uses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12470
Test Plan: CI (including ASAN/UBSAN)
Reviewed By: jowlyzhang
Differential Revision: D55254362
Pulled By: pdillinger
fbshipit-source-id: cc96a0b9840df99aa807f417725e120802c0ae18
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D55087322
fbshipit-source-id: ca4db7285444306d6c91545cd2c33483dfe05385
Summary:
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: palmje
Differential Revision: D54362227
fbshipit-source-id: ac634ba34f9351ba559c4ed96448f51d6ef33175
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12442
The patch deduplicates and unifies the logic of `WriteBatchWithIndex::{Get,GetEntity}FromBatch` using templates and makes some small code hygiene improvements, including consistently clearing the output value in the various non-success cases.
Reviewed By: jaykorean
Differential Revision: D54922935
fbshipit-source-id: c92e89f905a3c80cef57c2c840f49f806629238f
Summary:
This PR adds support for `TimedPut` API. We introduced a new type `kTypeValuePreferredSeqno` for entries added to the DB via the `TimedPut` API.
The life cycle of such an entry on the write/flush/compaction paths are:
1) It is initially added to memtable as:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, write_unix_time}`
2) When it's flushed to L0 sst files, it's converted to:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, preferred_seqno}`
when we have easy access to the seqno to time mapping.
3) During compaction, if certain conditions are met, we swap in the `preferred_seqno` and the entry will become:
`<user_key, preferred_seqno, kTypeValue>: value`. This step helps fast track these entries to the cold tier if they are eligible after the sequence number swap.
On the read path:
A `kTypeValuePreferredSeqno` entry acts the same as a `kTypeValue` entry, the unix_write_time/preferred seqno part packed in value is completely ignored.
Needed follow ups:
1) The seqno to time mapping accessible in flush needs to be extended to cover the `write_unix_time` for possible `kTypeValuePreferredSeqno` entries. This also means we need to track these `write_unix_time` in memtable.
2) Compaction filter support for the new `kTypeValuePreferredSeqno` type for feature parity with other `kTypeValue` and equivalent types.
3) Stress test coverage for the feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12419
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D54920296
Pulled By: jowlyzhang
fbshipit-source-id: c8b43f7a7c465e569141770e93c748371ff1da9e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12424
The PR adds a wide-column point lookup API `GetEntityFromBatch` to `WriteBatchWithIndex`. Similarly to APIs like `DB::GetEntity`, this new API returns wide-column entities as-is, and wraps plain values in an entity with a single column (the anonymous default column). Also, similarly to `WriteBatchWithIndex::GetFromBatch`, it only reads data from the batch itself.
Reviewed By: jaykorean
Differential Revision: D54826535
fbshipit-source-id: 92604f3ebd90fe1afbd36f2d2194b7dee0011efa
Summary:
since it been causing a few crash tests failures, I suspect it'll be easy to repro locally. Also fixed how to print its corruption message so it does not crash with output cannot be utf-8 decoded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12431
Reviewed By: hx235
Differential Revision: D54881023
Pulled By: cbi42
fbshipit-source-id: 47208a637cd69b30d2545154849405e37db62ed3
Summary:
When PR https://github.com/facebook/rocksdb/issues/9629 introduced user-defined timestamp support for `WriteCommittedTxn`, it adds this usage mandate for API `GetForUpdate` when UDT is enabled. The `do_validate` flag has to be true, and user should have already called `Transaction::SetReadTimestampForValidation` to set a read timestamp for validation. The rationale behind this mandate is this:
1) with do_vaildate = true, `GetForUpdate` could verify this relationships: let's denote the user-defined timestamp in db for the key as `Ts_db` and the read timestamp user set via `Transaction::SetReadTimestampForValidation` as `Ts_read`. UDT based validation will only pass if `Ts_db <= Ts_read`.
5950907a82/utilities/transactions/transaction_util.cc (L141)
2) Let's denote the committed timestamp set via `Transaction::SetCommitTimestamp` to be `Ts_cmt`. Later `WriteCommitedTxn::Commit` would only pass if this condition is met: `Ts_read < Ts_cmt`. 5950907a82/utilities/transactions/pessimistic_transaction.cc (L431)
Together these two checks can ensure `Ts_db < Ts_cmt` to meet the user-defined timestamp invariant that newer timestamp should have newer sequence number.
The `do_validate` flag was originally intended to make snapshot based validation optional. If it's true, `GetForUpdate` checks no entry is written after the snapshot. If it's false, it will skip this snapshot based validation. In this PR, we are making the UDT based validation configurable too based on this flag instead of mandating it for below reasons: 1) in some cases the users themselves can enforce aformentioned invariant on their side independently, without RocksDB help, for example, if they are managing a monotonically increasing timestamp, and their transactions are only committed in a single thread. So they don't need this UDT based validation and wants to skip it, 2) It also could be expensive or not practical for users to come up with such a read timestamp that is exactly in between their commit timestamp and the db's timestamp. For example, in aformentioned case where a monotonically increasing timestamp is managed, the users would need to access this timestamp both for setting the read timestamp and for setting the commit timestamp. So it's preferable to skip this check too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12369
Test Plan: added unit tests
Reviewed By: ltamasi
Differential Revision: D54268920
Pulled By: jowlyzhang
fbshipit-source-id: ca7693796f9bb11f376a2059d91841e51c89435a
Summary:
Partly following up on leftovers from https://github.com/facebook/rocksdb/issues/12388
In terms of public API:
* Make it clear that IngestExternalFileArg::file_temperature is just a hint for opening the existing file, though it was previously used for both copy-from temp hint and copy-to temp, which was bizarre.
* Specify how IngestExternalFile assigns temperature to file ingested into DB. (See details in comments.) This approach is not perfect in terms of matching how the DB assigns temperatures, but was the simplest way to get close. The key complication for matching DB temperature assignments is that ingestion files are copied (to a destination temp) before their target level is determined (in general).
* Add a temperature option to SstFileWriter::Open so that files intended for ingestion can be initially written to a chosen temperature.
* Note that "fail_if_not_bottommost_level" is obsolete/confusing use of "bottommost"
In terms of the implementation, there was a similar bit of oddness with the internal CopyFile API, which only took one temperature, ambiguously applicable to the source, destination, or both. This is also fixed.
Eventual suggested follow-up:
* Before copying files for ingestion, determine a tentative level assignment to use for destination temperature, and keep that even if final level assignment happens to be different at commit time (rare).
* More temperature handling for CreateColumnFamilyWithImport and Checkpoints.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12402
Test Plan:
Deeply revamped
ExternalSSTFileBasicTest.IngestWithTemperature to test the new changes. Previously this test was insufficient because it was only looking at temperatures according to the DB manifest. Incorporating FileTemperatureTestFS allows us to also test the temperatures in the storage layer.
Used macros instead of functions for better tracing to critical source location on test failures.
Some enhancements to FileTemperatureTestFS in the process of developing the revamped test.
Reviewed By: jowlyzhang
Differential Revision: D54442794
Pulled By: pdillinger
fbshipit-source-id: 41d9d0afdc073e6a983304c10bbc07c70cc7e995
Summary:
When internal cpp modernizer attempts to format rocksdb code, it will replace macro `ROCKSDB_NAMESPACE` with its default definition `rocksdb` when collapsing nested namespace. We filed a feedback for the tool T180254030 and the team filed a bug for this: https://github.com/llvm/llvm-project/issues/83452. At the same time, they suggested us to run the modernizer tool ourselves so future auto codemod attempts will be smaller. This diff contains:
Running
`xplat/scripts/codemod_service/cpp_modernizer.sh`
in fbcode/internal_repo_rocksdb/repo (excluding some directories in utilities/transactions/lock/range/range_tree/lib that has a non meta copyright comment)
without swapping out the namespace macro `ROCKSDB_NAMESPACE`
Followed by RocksDB's own
`make format`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12398
Test Plan: Auto tests
Reviewed By: hx235
Differential Revision: D54382532
Pulled By: jowlyzhang
fbshipit-source-id: e7d5b40f9b113b60e5a503558c181f080b9d02fa
Summary:
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR https://github.com/facebook/rocksdb/issues/12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: https://github.com/facebook/rocksdb/issues/11925#11943, and https://github.com/facebook/rocksdb/issues/11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12395
Test Plan:
# Summary
In the current implementation of iterators, `DBImpl*` and `ColumnFamilyData*` are held in `DBIter` and `ArenaWrappedDBIter` for two purposes: tracing and Refresh() API. With the introduction of a new iterator called MultiCfIterator in PR #12153 , which is a cross-column-family iterator that maintains multiple DBIters as child iterators from a consistent database state, we need to make some changes to the existing implementation. The new iterator will still be exposed through the generic Iterator interface with an additional capability to return AttributeGroups (via `attribute_groups()`) which is a list of wide columns grouped by column family. For more information about AttributeGroup, please refer to previous PRs: #11925#11943, and #11977.
To be able to return AttributeGroup in the default single CF iterator created, access to `ColumnFamilyHandle*` within `DBIter` is necessary. However, this is not currently available in `DBIter`. Since `DBImpl*` and `ColumnFamilyData*` can be easily accessed via `ColumnFamilyHandleImpl*`, we have decided to replace the pointers to `ColumnFamilyData` and `DBImpl` in `DBIter` with a pointer to `ColumnFamilyHandleImpl`.
# Test Plan
There should be no behavior changes. Existing tests and CI for the correctness tests.
**Test for Perf Regression**
Build
```
$> make -j64 release
```
Setup
```
$> TEST_TMPDIR=/dev/shm/db_bench ./db_bench -benchmarks="filluniquerandom" -key_size=32 -value_size=512 -num=1000000 -compression_type=none
```
Run
```
TEST_TMPDIR=/dev/shm/db_bench ./db_bench -use_existing_db=1 -benchmarks="newiterator,seekrandom" -cache_size=10485760000
```
Before the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.552 micros/op 1810157 ops/sec 0.552 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.502 micros/op 222143 ops/sec 4.502 seconds 1000000 operations; (0 of 1000000 found)
```
After the change
```
DB path: [/dev/shm/db_bench/dbbench]
newiterator : 0.520 micros/op 1924401 ops/sec 0.520 seconds 1000000 operations;
DB path: [/dev/shm/db_bench/dbbench]
seekrandom : 4.532 micros/op 220657 ops/sec 4.532 seconds 1000000 operations; (0 of 1000000 found)
```
Reviewed By: pdillinger
Differential Revision: D54332713
Pulled By: jaykorean
fbshipit-source-id: b28d897ad519e58b1ca82eb068a6319544a4fae5
Summary:
When the rate limiter does not have any waiting requests, the first request to arrive may consume all of the available bandwidth, despite potentially having lower priority than requests that arrive later in the same refill interval. Then, those higher priority requests must wait for a refill. So even in scenarios in which we have an overall bandwidth surplus, the highest priority requests can be sporadically delayed up to a whole refill period.
Alone, this isn't necessarily problematic as the refill period is configurable via `refill_period_us` and can be tuned down as needed until the max sporadic delay is tolerable. However, tuning down `refill_period_us` had a side effect of reducing burst size. Some users require a certain burst size to issue optimal I/O sizes to the underlying storage system.
To satisfy those users, this PR decouples the refill period from the burst size. That way, the max sporadic delay can be limited without impacting I/O sizes issued to the underlying storage system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12379
Test Plan:
The goal is to show we can now limit the max sporadic delay without impacting compaction's I/O size.
The benchmark runs compaction with a large I/O size, while user reads simultaneously run at a low rate that does not consume all of the available bandwidth. The max sporadic delay is measured using the P100 of rocksdb.file.read.get.micros. I just used strace to verify the compaction reads follow `rate_limiter_single_burst_bytes`
Setup: `./db_bench -benchmarks=fillrandom,flush -write_buffer_size=67108864 -disable_auto_compactions=true -value_size=256 -num=1048576`
Benchmark: `./db_bench -benchmarks=readrandom -use_existing_db=true -num=1048576 -duration=10 -benchmark_read_rate_limit=4096 -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -rate_limit_user_ops=true -statistics=true -cache_size=0 -stats_level=5 -compaction_readahead_size=16777216 -use_direct_reads=true`
Results:
refill_micros | rocksdb.file.read.get.micros (P100)
-- | --
10000 | 10802
100000 | 100240
1000000 | 922061
For verifying compaction read sizes: `strace -fye pread64 ./db_bench -benchmarks=compact -use_existing_db=true -rate_limiter_bytes_per_sec=67108864 -rate_limiter_refill_period_us=$refill_micros -rate_limiter_single_burst_bytes=16777216 -rate_limit_bg_reads=true -compaction_readahead_size=16777216 -use_direct_reads=true`
Reviewed By: hx235
Differential Revision: D54165675
Pulled By: ajkr
fbshipit-source-id: c5968486316cbfb7ff8e5b7d75d3589883dd1105
Summary:
`nullptr` is typesafe. `0` and `NULL` are not. In the future, only `nullptr` will be allowed.
This diff helps us embrace the future _now_ in service of enabling `-Wzero-as-null-pointer-constant`.
Reviewed By: meyering
Differential Revision: D54163069
fbshipit-source-id: e5bb4b6ee79d82f1437ffed602bdb41dcfc0e59a
Summary:
A lot of variants of Get and MultiGet have been added to `include/rocksdb/db.h` over the years. Try to consolidate them by marking variants that don't return timestamps as deprecated. The underlying DB implementation will check and return Status::NotSupported() if it doesn't support returning timestamps and the caller asks for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12327
Reviewed By: pdillinger
Differential Revision: D53828151
Pulled By: anand1976
fbshipit-source-id: e0b5ca42d32daa2739d5f439a729815a2d4ff050
Summary:
Modify ReadAsync callback API to remove const from FSReadRequest as const doesn't let to fs_scratch to move the ownership.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11649
Test Plan: CircleCI jobs
Reviewed By: anand1976
Differential Revision: D53585309
Pulled By: akankshamahajan15
fbshipit-source-id: 3bff9035db0e6fbbe34721a5963443355807420d
Summary:
There is no strong reason for user to need this mode while on the other hand, its behavior is destructive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12337
Reviewed By: hx235
Differential Revision: D53630393
Pulled By: jowlyzhang
fbshipit-source-id: ce94b537258102cd98f89aa4090025663664dd78
Summary:
The following are risks associated with pointer-to-pointer reinterpret_cast:
* Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do.
* Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally.
I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement:
* Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have
`struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic.
* Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance.
With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain.
A couple of related interventions included here:
* Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle.
* Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse).
Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work.
I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308
Test Plan: existing tests, CI
Reviewed By: ltamasi
Differential Revision: D53204947
Pulled By: pdillinger
fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2
Summary:
The RocksDB correctness testing has recently discovered a possible, but very unlikely, correctness issue with MultiGet. The issue happens when all of the below conditions are met -
1. Duplicate keys in a MultiGet batch
2. Key matches the last key in a non-zero, non-bottommost level file
3. Final value is not in the file (merge operand, not snapshot visible etc)
4. Multiple entries exist for the key in the file spanning more than 1 data block. This can happen due to snapshots, which would force multiple versions of the key in the file, and they may spill over to another data block
5. Lookup attempt in the SST for the first of the duplicates fails with IO error on a data block (NOT the first data block, but the second or subsequent uncached block), but no errors for the other duplicates
6. Value or merge operand for the key is present in the very next level
The problem is, in FilePickerMultiGet, when looking up keys in a level we use FileIndexer and the overlapping file in the current level to determine the search bounds for that key in the file list in the next level. If the next level is empty, the search bounds are reset and we do a full binary search in the next non-empty level's LevelFilesBrief. However, under the conditions https://github.com/facebook/rocksdb/issues/1 and https://github.com/facebook/rocksdb/issues/2 listed above, only the first of the duplicates has its next-level search bounds updated, and the remaining duplicates are skipped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12295
Test Plan: Add unit tests that fail an assertion or return wrong result without the fix
Reviewed By: hx235
Differential Revision: D53187634
Pulled By: anand1976
fbshipit-source-id: a5eadf4fede9bbdec784cd993b15e3341436d1ea
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12324
We are trying to use rocksdb inside Hedwig. This is causing some builds to fail D53033764. Hence fixing -Wsuggest-destructor-override warning.
Reviewed By: jowlyzhang
Differential Revision: D53328538
fbshipit-source-id: d5b9865442de049b18f9ed086df5fa58fb8880d5
Summary:
As titled. This changes public API behavior, and subclasses of `WritableFile` and `FSWritableFile` need to explicitly provide an implementation for the `GetFileSize` method after this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12303
Reviewed By: ajkr
Differential Revision: D53205769
Pulled By: jowlyzhang
fbshipit-source-id: 2e613ca3650302913821b33159b742bdf1d24bc7
Summary:
Provide support for FSBuffer for point lookups
It also add support for compaction and scan reads that goes through BlockFetcher when readahead/prefetching is not enabled.
Some of the compaction/Scan reads goes through FilePrefetchBuffer and some through BlockFetcher. This PR add support to use underlying file system scratch buffer for reads that go through BlockFetcher as for FilePrefetch reads, design is complicated to support this feature.
Design - In order to use underlying FileSystem provided scratch for Reads, it uses MultiRead with 1 request instead of Read API which required API change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12266
Test Plan: Stress test using underlying file system scratch buffer internally.
Reviewed By: anand1976
Differential Revision: D53019089
Pulled By: akankshamahajan15
fbshipit-source-id: 4fe3d090d77363320e4b67186fd4d51c005c0961
Summary:
In C++, `extern` is redundant in a number of cases:
* "Global" function declarations and definitions
* "Global" variable definitions when already declared `extern`
For consistency and simplicity, I've removed these in code that *we own*. In a couple of cases, I removed obsolete declarations, and for MagicNumber constants, I have consolidated the declarations into a header file (format.h)
as standard best practice would prescribe.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12300
Test Plan: no functional changes, CI
Reviewed By: ajkr
Differential Revision: D53148629
Pulled By: pdillinger
fbshipit-source-id: fb8d927959892e03af09b0c0d542b0a3b38fd886
Summary:
**Context/Summary:**
The rate_limiter_priority passed to SequentialFileReader is now passed down to underlying file system. This allows the priority associated with backup/restore SST reads to be exposed to FS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12296
Test Plan: - Modified existing UT
Reviewed By: pdillinger
Differential Revision: D53100368
Pulled By: hx235
fbshipit-source-id: b4a28917efbb1b0d16f9d1c2b38769bffcff0f34
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12271
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: jaykorean
Differential Revision: D52969070
fbshipit-source-id: 22e0958ad6ced5c021ef7dafbe16a17c282935d8
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12276
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: jaykorean
Differential Revision: D52969073
fbshipit-source-id: 1b2495548d939c32e7a89a6424767497fab9550e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12273
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: jaykorean
Differential Revision: D52969166
fbshipit-source-id: 129715bfe69735b83b077c7d6cbf1786c1dfc410
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12272
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: jaykorean
Differential Revision: D52969170
fbshipit-source-id: 581304039be789cbce6760740e9557a925e02722
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12279
`-Wextra-semi` or `-Wextra-semi-stmt`
If the code compiles, this is safe to land.
Reviewed By: jaykorean
Differential Revision: D52969150
fbshipit-source-id: a66326e2f8285625c4260f4d23df678a25bcfe29
