mirror of
https://github.com/facebook/rocksdb.git
synced 2024-11-30 13:41:46 +00:00
296 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
zaidoon
|
3104e55f29 |
update DB::DumpSupportInfo to log whether jemalloc is supported or not (#12386)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12386 Reviewed By: cbi42 Differential Revision: D54231896 Pulled By: ajkr fbshipit-source-id: 6b3357b2e97d3599955e303810088bb5d5896199 |
||
|
anand76
|
d227276147 |
Deprecate some variants of Get and MultiGet (#12327)
Summary: A lot of variants of Get and MultiGet have been added to `include/rocksdb/db.h` over the years. Try to consolidate them by marking variants that don't return timestamps as deprecated. The underlying DB implementation will check and return Status::NotSupported() if it doesn't support returning timestamps and the caller asks for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12327 Reviewed By: pdillinger Differential Revision: D53828151 Pulled By: anand1976 fbshipit-source-id: e0b5ca42d32daa2739d5f439a729815a2d4ff050 |
||
|
Yu Zhang
|
10d02456b6 |
Add support to bulk load external files with user-defined timestamps (#12343)
Summary:
This PR adds initial support to bulk loading external sst files with user-defined timestamps.
To ensure this invariant is met while ingesting external files:
assume there are two internal keys: <K, ts1, seq1> and <K, ts2, seq2>, the following should hold:
ts1 < ts2 iff. seq1 < seq2
These extra requirements are added for ingesting external files with user-defined timestamps:
1) A file with overlapping user key (without timestamp) range with the db cannot be ingested. This is because we cannot ensure above invariant is met without checking each overlapped key's timestamp and compare it with the timestamp from the db. This is an expensive step. This bulk loading feature will be used by MyRocks and currently their usage can guarantee ingested file's key range doesn't overlap with db.
|
||
|
Levi Tamasi
|
de1e3ff6ea |
Fix a data race in DBImpl::RenameTempFileToOptionsFile (#12347)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12347 `DBImpl::disable_delete_obsolete_files_` should only be accessed while holding the DB mutex to prevent data races. There's a piece of logic in `DBImpl::RenameTempFileToOptionsFile` where this synchronization was previously missing. The patch fixes this issue similarly to how it's handled in `DisableFileDeletions` and `EnableFileDeletions`, that is, by saving the counter value while holding the mutex and then performing the actual file deletion outside the critical section. Note: this PR only fixes the race itself; as a followup, we can also look into cleaning up and optimizing the file deletion logic (which is currently inefficient on multiple different levels). Reviewed By: jowlyzhang Differential Revision: D53675153 fbshipit-source-id: 5358e894ee6829d3edfadac50a93d97f8819e481 |
||
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
||
|
Yu Zhang
|
e3e8fbb497 |
Add a separate range classes for internal usage (#12071)
Summary: Introduce some different range classes `UserKeyRange` and `UserKeyRangePtr` to be used by internal implementation. The `Range` class is used in both public APIs like `DB::GetApproximateSizes`, `DB::GetApproximateMemTableStats`, `DB::GetPropertiesOfTablesInRange` etc and internal implementations like `ColumnFamilyData::RangesOverlapWithMemtables`, `VersionSet::GetPropertiesOfTablesInRange`. These APIs have different expectations of what keys this range class contain. Public API users are supposed to populate the range with the user keys without timestamp, in the same way that point lookup and range scan APIs' key input only expect the user key without timestamp. The internal APIs implementation expect a user key whose format is compatible with the user comparator, a.k.a a user key with the timestamp. This PR contains: 1) introducing counterpart range class `UserKeyRange` `UserKeyRangePtr` for internal implementation while leave the existing `Range` and `RangePtr` class only for public APIs. Internal implementations are updated to use this new class instead. 2) add user-defined timestamp support for `DB::GetPropertiesOfTablesInRange` API and `DeleteFilesInRanges` API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12071 Test Plan: existing tests Added test for `DB::GetPropertiesOfTablesInRange` and `DeleteFilesInRanges` APIs for when user-defined timestamp is enabled. The change in external_file_ingestion_job doesn't have a user-defined timestamp enabled test case coverage, will add one in a follow up PR that adds file ingestion support for UDT. Reviewed By: ltamasi Differential Revision: D53292608 Pulled By: jowlyzhang fbshipit-source-id: 9a9279e23c640a6d8f8232636501a95aef7638b8 |
||
|
Peter Dillinger
|
61ed0de600 |
Add more detail to some statuses (#12307)
Summary: and also fix comment/label on some MacOS CI jobs. Motivated by a crash test failure missing a definitive indicator of the genesis of the status: ``` file ingestion error: Operation failed. Try again.: ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12307 Test Plan: just cosmetic changes. These statuses should not arise frequently enough to be a performance issue (copying messages). Reviewed By: jaykorean Differential Revision: D53199529 Pulled By: pdillinger fbshipit-source-id: ad83daaa5d80f75c9f81158e90fb6d9ecca33fe3 |
||
|
Peter Dillinger
|
cb08a682d4 |
Fix/cleanup SeqnoToTimeMapping (#12253)
Summary: The SeqnoToTimeMapping class (RocksDB internal) used by the preserve_internal_time_seconds / preclude_last_level_data_seconds options was essentially in a prototype state with some significant flaws that would risk biting us some day. This is a big, complicated change because both the implementation and the behavioral requirements of the class needed to be upgraded together. In short, this makes SeqnoToTimeMapping more internally responsible for maintaining good invariants, so that callers don't easily encounter dangerous scenarios. * Some API functions were confusingly named and structured, so I fully refactored the APIs to use clear naming (e.g. `DecodeFrom` and `CopyFromSeqnoRange`), object states, function preconditions, etc. * Previously the object could informally be sorted / compacted or not, and there was limited checking or enforcement on these states. Now there's a well-defined "enforced" state that is consistently checked in debug mode for applicable operations. (I attempted to create a separate "builder" class for unenforced states, but IIRC found that more cumbersome for existing uses than it was worth.) * Previously operations would coalesce data in a way that was better for `GetProximalTimeBeforeSeqno` than for `GetProximalSeqnoBeforeTime` which is odd because the latter is the only one used by DB code currently (what is the seqno cut-off for data definitely older than this given time?). This is now reversed to consistently favor `GetProximalSeqnoBeforeTime`, with that logic concentrated in one place: `SeqnoToTimeMapping::SeqnoTimePair::Merge()`. Unfortunately, a lot of unit test logic was specifically testing the old, suboptimal behavior. * Previously, the natural behavior of SeqnoToTimeMapping was to THROW AWAY data needed to get reasonable answers to the important `GetProximalSeqnoBeforeTime` queries. This is because SeqnoToTimeMapping only had a FIFO policy for staying within the entry capacity (except in aggregate+sort+serialize mode). If the DB wasn't extremely careful to avoid gathering too many time mappings, it could lose track of where the seqno cutoff was for cold data (`GetProximalSeqnoBeforeTime()` returning 0) and preventing all further data migration to the cold tier--until time passes etc. for mappings to catch up with FIFO purging of them. (The problem is not so acute because SST files contain relevant snapshots of the mappings, but the problem would apply to long-lived memtables.) * Now the SeqnoToTimeMapping class has fully-integrated smarts for keeping a sufficiently complete history, within capacity limits, to give good answers to `GetProximalSeqnoBeforeTime` queries. * Fixes old `// FIXME: be smarter about how we erase to avoid data falling off the front prematurely.` * Fix an apparent bug in how entries are selected for storing into SST files. Previously, it only selected entries within the seqno range of the file, but that would easily leave a gap at the beginning of the timeline for data in the file for the purposes of answering GetProximalXXX queries with reasonable accuracy. This could probably lead to the same problem discussed above in naively throwing away entries in FIFO order in the old SeqnoToTimeMapping. The updated testing of GetProximalSeqnoBeforeTime in BasicSeqnoToTimeMapping relies on the fixed behavior. * Fix a potential compaction CPU efficiency/scaling issue in which each compaction output file would iterate over and sort all seqno-to-time mappings from all compaction input files. Now we distill the input file entries to a constant size before processing each compaction output file. Intended follow-up (me or others): * Expand some direct testing of SeqnoToTimeMapping APIs. Here I've focused on updating existing tests to make sense. * There are likely more gaps in availability of needed SeqnoToTimeMapping data when the DB shuts down and is restarted, at least with WAL. * The data tracked in the DB could be kept more accurate and limited if it used the oldest seqno of unflushed data. This might require some more API refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12253 Test Plan: unit tests updated Reviewed By: jowlyzhang Differential Revision: D52913733 Pulled By: pdillinger fbshipit-source-id: 020737fcbbe6212f6701191a6ab86565054c9593 |
||
|
马越
|
1a1f9f1660 |
Fix the compactRange with wrong cf handle when ClipColumnFamily (#12219)
Summary: - **Context**: In ClipColumnFamily, the DeleteRange API will be used to delete data, and then CompactRange will be called for physical deletion. But now However, the ColumnFamilyHandle is not passed , so by default only the DefaultColumnFamily will be CompactRanged. Therefore, it may cause that the data in some sst files of CompactionRange cannot be physically deleted. - **In this change** Pass the ColumnFamilyHandle when call CompactRange Pull Request resolved: https://github.com/facebook/rocksdb/pull/12219 Reviewed By: ajkr Differential Revision: D52665162 Pulled By: cbi42 fbshipit-source-id: e8e997aa25ec4ca40e347be89edc7e84a7a0edce |
||
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
||
|
anand76
|
a036525809 |
Lightweight verification of MANIFEST file after close on shutdown (#12174)
Summary: Do a size verification on the MANIFEST file during DB shutdown, after closing the file. If the verification fails, write a new MANIFEST file. In the future, we can do a more thorough verification if we want to. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12174 Test Plan: Unit test, and some manual verification Reviewed By: ajkr Differential Revision: D52451184 Pulled By: anand1976 fbshipit-source-id: fc3bc170e22f6c9a9c482ee5ff592abab889df83 |
||
|
Jay Huh
|
8b8f6c63ef |
ColumnFamilyHandle Nullcheck in GetEntity and MultiGetEntity (#12057)
Summary: - Add missing null check for ColumnFamilyHandle in `GetEntity()` - `FailIfCfHasTs()` now returns `Status::InvalidArgument()` if `column_family` is null. `MultiGetEntity()` can rely on this for cfh null check. - Added `DeleteRange` API using Default Column Family to be consistent with other major APIs (This was also causing Java Test failure after the `FailIfCfHasTs()` change) Pull Request resolved: https://github.com/facebook/rocksdb/pull/12057 Test Plan: - Updated `DBWideBasicTest::GetEntityAsPinnableAttributeGroups` to include null CF case - Updated `DBWideBasicTest::MultiCFMultiGetEntityAsPinnableAttributeGroups` to include null CF case Reviewed By: jowlyzhang Differential Revision: D51167445 Pulled By: jaykorean fbshipit-source-id: 1c1e44fd7b7df4d2dc3bb2d7d251da85bad7d664 |
||
|
Yu Zhang
|
509947ce2c |
Quarantine files in a limbo state after a manifest error (#12030)
Summary: Part of the procedures to handle manifest IO error is to disable file deletion in case some files in limbo state get deleted prematurely. This is not ideal because: 1) not all the VersionEdits whose commit encounter such an error contain updates for files, disabling file deletion sometimes are not necessary. 2) `EnableFileDeletion` has a force mode that could make other threads accidentally disrupt this procedure in recovery. 3) Disabling file deletion as a whole is also not as efficient as more precisely tracking impacted files from being prematurely deleted. This PR replaces this mechanism with tracking such files and quarantine them from being deleted in `ErrorHandler`. These are the types of files being actively tracked in quarantine in this PR: 1) new table files and blob files from a background job 2) old manifest file whose immediately following new manifest file's CURRENT file creation gets into unclear state. Current handling is not sufficient to make sure the old manifest file is kept in case it's needed. Note that WAL logs are not part of the quarantine because `min_log_number_to_keep` is a safe mechanism and it's only updated after successful manifest commits so it can prevent this premature deletion issue from happening. We track these files' file numbers because they share the same file number space. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12030 Test Plan: Modified existing unit tests Reviewed By: ajkr Differential Revision: D51036774 Pulled By: jowlyzhang fbshipit-source-id: 84ef26271fbbc888ef70da5c40fe843bd7038716 |
||
|
Jay Huh
|
0ecfc4fbb4 |
AttributeGroups - GetEntity Implementation (#11943)
Summary: Implementation of `GetEntity()` API that returns wide-column entities as AttributeGroups from multiple column families for a single key. Regarding the definition of Attribute groups, please see the detailed example description in PR https://github.com/facebook/rocksdb/issues/11925 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11943 Test Plan: - `DBWideBasicTest::GetEntityAsPinnableAttributeGroups` added will enable the new API in the `db_stress` after merging Reviewed By: ltamasi Differential Revision: D50195794 Pulled By: jaykorean fbshipit-source-id: 218d54841ac7e337de62e13b1233b0a99bd91af3 |
||
|
Jay Huh
|
2dab137182 |
Mark more files for periodic compaction during offpeak (#12031)
Summary: - The struct previously named `OffpeakTimeInfo` has been renamed to `OffpeakTimeOption` to indicate that it's a user-configurable option. Additionally, a new struct, `OffpeakTimeInfo`, has been introduced, which includes two fields: `is_now_offpeak` and `seconds_till_next_offpeak_start`. This change prevents the need to parse the `daily_offpeak_time_utc` string twice. - It's worth noting that we may consider adding more fields to the `OffpeakTimeInfo` struct, such as `elapsed_seconds` and `total_seconds`, as needed for further optimization. - Within `VersionStorageInfo::ComputeFilesMarkedForPeriodicCompaction()`, we've adjusted the `allowed_time_limit` to include files that are expected to expire by the next offpeak start. - We might explore further optimizations, such as evenly distributing files to mark during offpeak hours, if the initial approach results in marking too many files simultaneously during the first scoring in offpeak hours. The primary objective of this PR is to prevent periodic compactions during non-offpeak hours when offpeak hours are configured. We'll start with this straightforward solution and assess whether it suffices for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12031 Test Plan: Unit Tests added - `DBCompactionTest::LevelPeriodicCompactionOffpeak` for Leveled - `DBTestUniversalCompaction2::PeriodicCompaction` for Universal Reviewed By: cbi42 Differential Revision: D50900292 Pulled By: jaykorean fbshipit-source-id: 267e7d3332d45a5d9881796786c8650fa0a3b43d |
||
|
Jay Huh
|
e230e4d248 |
Make OffpeakTimeInfo available in VersionSet (#12018)
Summary: As mentioned in https://github.com/facebook/rocksdb/issues/11893, we are going to use the offpeak time information to pre-process TTL-based compactions. To do so, we need to access `daily_offpeak_time_utc` in `VersionStorageInfo::ComputeCompactionScore()` where we pick the files to compact. This PR is to make the offpeak time information available at the time of compaction-scoring. We are not changing any compaction scoring logic just yet. Will follow up in a separate PR. There were two ways to achieve what we want. 1. Make `MutableDBOptions` available in `ColumnFamilyData` and `ComputeCompactionScore()` take `MutableDBOptions` along with `ImmutableOptions` and `MutableCFOptions`. 2. Make `daily_offpeak_time_utc` and `IsNowOffpeak()` available in `VersionStorageInfo`. We chose the latter as it involves smaller changes. This change includes the following - Introduction of `OffpeakTimeInfo` and `IsNowOffpeak()` has been moved from `MutableDBOptions` - `OffpeakTimeInfo` added to `VersionSet` and it can be set during construction and by `ChangeOffpeakTimeInfo()` - During `SetDBOptions()`, if offpeak time info needs to change, it calls `MaybeScheduleFlushOrCompaction()` to re-compute compaction scores and process compactions as needed Pull Request resolved: https://github.com/facebook/rocksdb/pull/12018 Test Plan: - `DBOptionsTest::OffpeakTimes` changed to include checks for `MaybeScheduleFlushOrCompaction()` calls and `VersionSet`'s OffpeakTimeInfo value change during `SetDBOptions()`. - `VersionSetTest::OffpeakTimeInfoTest` added to test `ChangeOffpeakTimeInfo()`. `IsNowOffpeak()` tests moved from `DBOptionsTest::OffpeakTimes` Reviewed By: pdillinger Differential Revision: D50723881 Pulled By: jaykorean fbshipit-source-id: 3cff0291936f3729c0e9c7750834b9378fb435f6 |
||
|
Peter Dillinger
|
4155087746 |
Use manifest to persist pre-allocated seqnos (#11995)
Summary: ... and other fixes for crash test after https://github.com/facebook/rocksdb/issues/11922. * When pre-allocating sequence numbers for establishing a time history, record that last sequence number in the manifest so that it is (most likely) restored on recovery even if no user writes were made or were recovered (e.g. no WAL). * When pre-allocating sequence numbers for establishing a time history, only do this for actually new DBs. * Remove the feature that ensures non-zero sequence number on creating the first column family with preserve/preclude option after initial DB::Open. Until fixed in a way compatible with the crash test, this creates a gap where some data written with active preserve/preclude option won't have a known associated time. Together, these ensure we don't upset the crash test by manipulating sequence numbers after initial DB creation (esp when re-opening with different options). (The crash test expects that the seqno after re-open corresponds to a known point in time from previous crash test operation, matching an expected DB state.) Follow-up work: * Re-fill the gap to ensure all data written under preserve/preclude settings have a known time estimate. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11995 Test Plan: Added to unit test SeqnoTimeTablePropTest.PrePopulateInDB Verified fixes two crash test scenarios: ## 1st reproducer First apply ``` diff --git a/db_stress_tool/expected_state.cc b/db_stress_tool/expected_state.cc index b483e154c..ef63b8d6c 100644 --- a/db_stress_tool/expected_state.cc +++ b/db_stress_tool/expected_state.cc @@ -333,6 +333,7 @@ Status FileExpectedStateManager::SaveAtAndAfter(DB* db) { s = NewFileTraceWriter(Env::Default(), soptions, trace_file_path, &trace_writer); } + if (getenv("CRASH")) assert(false); if (s.ok()) { TraceOptions trace_opts; trace_opts.filter |= kTraceFilterGet; ``` Then ``` mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_expected mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/* CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=36000 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=0 ``` Without the fix you get ``` ... DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox] (Re-)verified 34 unique IDs Error restoring historical expected values: Corruption: DB is older than any restorable expected state ``` ## 2nd reproducer First apply ``` diff --git a/db_stress_tool/db_stress_test_base.cc b/db_stress_tool/db_stress_test_base.cc index 62ddead7b..f2654980f 100644 --- a/db_stress_tool/db_stress_test_base.cc +++ b/db_stress_tool/db_stress_test_base.cc @@ -1126,6 +1126,7 @@ void StressTest::OperateDb(ThreadState* thread) { // OPERATION write TestPut(thread, write_opts, read_opts, rand_column_families, rand_keys, value); + if (getenv("CRASH")) assert(false); } else if (prob_op < del_bound) { assert(write_bound <= prob_op); // OPERATION delete ``` Then ``` rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/* CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=0 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=3600 ``` Without the fix you get ``` DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox] (Re-)verified 34 unique IDs db_stress: db_stress_tool/expected_state.cc:380: virtual rocksdb::{anonymous}::ExpectedStateTraceRecordHandler::~ ExpectedStateTraceRecordHandler(): Assertion `IsDone()' failed. ``` Reviewed By: jowlyzhang Differential Revision: D50533346 Pulled By: pdillinger fbshipit-source-id: 1056be45c5b9e537c8c601b28c4b27431a782477 |
||
|
Yu Zhang
|
933ee295f4 |
Fix a race condition between recovery and backup (#11955)
Summary: A race condition between recovery and backup can happen with error messages like this: ```Failure in BackupEngine::CreateNewBackup with: IO error: No such file or directory: While opening a file for sequentially reading: /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox/002653.log: No such file or directory``` PR https://github.com/facebook/rocksdb/issues/6949 introduced disabling file deletion during error handling of manifest IO errors. Aformentioned race condition is caused by this chain of event: [Backup engine] disable file deletion [Recovery] disable file deletion <= this is optional for the race condition, it may or may not get called [Backup engine] get list of file to copy/link [Recovery] force enable file deletion .... some files refered by backup engine get deleted [Backup engine] copy/link file <= error no file found This PR fixes this with: 1) Recovery thread is currently forcing enabling file deletion as long as file deletion is disabled. Regardless of whether the previous error handling is for manifest IO error and that disabled it in the first place. This means it could incorrectly enabling file deletions intended by other threads like backup threads, file snapshotting threads. This PR does this check explicitly before making the call. 2) `disable_delete_obsolete_files_` is designed as a counter to allow different threads to enable and disable file deletion separately. The recovery thread currently does a force enable file deletion, because `ErrorHandler::SetBGError()` can be called multiple times by different threads when they receive a manifest IO error(details per PR https://github.com/facebook/rocksdb/issues/6949), resulting in `DBImpl::DisableFileDeletions` to be called multiple times too. Making a force enable file deletion call that resets the counter `disable_delete_obsolete_files_` to zero is a workaround for this. However, as it shows in the race condition, it can incorrectly suppress other threads like a backup thread's intention to keep the file deletion disabled. <strike>This PR adds a `std::atomic<int> disable_file_deletion_count_` to the error handler to track the needed counter decrease more precisely</strike>. This PR tracks and caps file deletion enabling/disabling in error handler. 3) for recovery, the section to find obsolete files and purge them was moved to be done after the attempt to enable file deletion. The actual finding and purging is more likely to happen if file deletion was previously disabled and get re-enabled now. An internal function `DBImpl::EnableFileDeletionsWithLock` was added to support change 2) and 3). Some useful logging was explicitly added to keep those log messages around. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11955 Test Plan: existing unit tests Reviewed By: anand1976 Differential Revision: D50290592 Pulled By: jowlyzhang fbshipit-source-id: 73aa8331ca4d636955a5b0324b1e104a26e00c9b |
||
|
Peter Dillinger
|
2fd850c7eb |
Remove write queue synchronization from WriteOptionsFile (#11951)
Summary: This has become obsolete with the new `options_mutex_` in https://github.com/facebook/rocksdb/pull/11929 * Remove now-unnecessary parameter from WriteOptionsFile * Rename (and negate) other parameter for better clarity (the caller shouldn't tell the callee what the callee needs, just what the caller knows, provides, and requests) * Move a ROCKS_LOG_WARN (I/O) in WriteOptionsFile to outside of holding DB mutex. * Also *avoid* (but not always eliminate) write queue synchronization in SetDBOptions. Still needed if there was a change to WAL size limit or other configuration. * Improve some comments Pull Request resolved: https://github.com/facebook/rocksdb/pull/11951 Test Plan: existing unit tests and TSAN crash test local run Reviewed By: ajkr Differential Revision: D50247904 Pulled By: pdillinger fbshipit-source-id: 7dfe445c705ec013886a2adb7c50abe50d83af69 |
||
|
Jay Huh
|
c9d8e6a5bf |
AttributeGroups - MultiGetEntity Implementation (#11925)
Summary: Introducing the notion of AttributeGroup by adding the `MultiGetEntity()` API retrieving `PinnableAttributeGroups`. An "attribute group" refers to a logical grouping of wide-column entities within RocksDB. These attribute groups are implemented using column families. Users can store WideColumns in different CFs for various reasons (e.g. similar access patterns, same types, etc.). This new API `MultiGetEntity()` takes keys and `PinnableAttributeGroups` per key. `PinnableAttributeGroups` is just a list of `PinnableAttributeGroup`s in which we have `ColumnFamilyHandle*`, `Status`, and `PinnableWideColumns`. Let's say a user stored "hot" wide columns in column family "hot_data_cf" and "cold" wide columns in column family "cold_data_cf" and all other columns in "common_cf". Prior to this PR, if the user wants to query for two keys, "key_1" and "key_2" and but only interested in "common_cf" and "hot_data_cf" for "key_1", and "common_cf" and "cold_data_cf" for "key_2", the user would have to construct input like `keys = ["key_1", "key_1", "key_2", "key_2"]`, `column_families = ["common_cf", "hot_data_cf", "common_cf", "cold_data_cf"]` and get the flat list of `PinnableWideColumns` to find the corresponding <key,CF> combo. With the new `MultiGetEntity()` introduced in this PR, users can now query only `["common_cf", "hot_data_cf"]` for `"key_1"`, and only `["common_cf", "cold_data_cf"]` for `"key_2"`. The user will get `PinnableAttributeGroups` for each key, and `PinnableAttributeGroups` gives a list of `PinnableAttributeGroup`s where the user can find column family and corresponding `PinnableWideColumns` and the `Status`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11925 Test Plan: - `DBWideBasicTest::MultiCFMultiGetEntityAsPinnableAttributeGroups` added will enable this new API in the `db_stress` in a separate PR Reviewed By: ltamasi Differential Revision: D50017414 Pulled By: jaykorean fbshipit-source-id: 643611d1273c574bc81b94c6f5aeea24b40c4586 |
||
|
Changyu Bi
|
648fe25bc0 |
Always clear files marked for compaction in ComputeCompactionScore() (#11946)
Summary: We were seeing the following stress test failures: ```LevelCompactionBuilder::PickFileToCompact(const rocksdb::autovector<std::pair<int, rocksdb::FileMetaData*> >&, bool): Assertion `!level_file.second->being_compacted' failed``` This can happen when we are picking a file to be compacted from some files marked for compaction, but that file is already being_compacted. We prevent this by always calling `ComputeCompactionScore()` after we pick a compaction and mark some files as being_compacted. However, if SetOptions() is called to disable marking certain files to be compacted, say `enable_blob_garbage_collection`, we currently just skip the relevant logic in `ComputeCompactionScore()` without clearing the existing files already marked for compaction. This PR fixes this issue by already clearing these files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11946 Test Plan: existing tests. Reviewed By: akankshamahajan15 Differential Revision: D50232608 Pulled By: cbi42 fbshipit-source-id: 11e4fb5e9d48b0f946ad33b18f7c005f0161f496 |
||
|
Peter Dillinger
|
d010b02e86 |
Fix race in options taking effect (#11929)
Summary: In follow-up to https://github.com/facebook/rocksdb/issues/11922, fix a race in functions like CreateColumnFamily and SetDBOptions where the DB reports one option setting but a different one is left in effect. To fix, we can add an extra mutex around these rare operations. We don't want to hold the DB mutex during I/O or other slow things because of the many purposes it serves, but a mutex more limited to these cases should be fine. I believe this would fix a write-write race in https://github.com/facebook/rocksdb/issues/10079 but not the read-write race. Intended follow-up to this: * Should be able to remove write thread synchronization from DBImpl::WriteOptionsFile Pull Request resolved: https://github.com/facebook/rocksdb/pull/11929 Test Plan: Added two mini-stress style regression tests that fail with >1% probability before this change: DBOptionsTest::SetStatsDumpPeriodSecRace ColumnFamilyTest::CreateAndDropPeriodicRace I haven't reproduced such an inconsistency between in-memory options and on disk latest options, but this change at least improves safety and adds a test anyway: DBOptionsTest::SetStatsDumpPeriodSecRace Reviewed By: ajkr Differential Revision: D50024506 Pulled By: pdillinger fbshipit-source-id: 1e99a9ed4d96fdcf3ac5061ec6b3cee78aecdda4 |
||
|
Peter Dillinger
|
1d5bddbc58 |
Bootstrap, pre-populate seqno_to_time_mapping (#11922)
Summary: This change has two primary goals (follow-up to https://github.com/facebook/rocksdb/issues/11917, https://github.com/facebook/rocksdb/issues/11920): * Ensure the DB seqno_to_time_mapping has entries that allow us to put a good time lower bound on any writes that happen after setting up preserve/preclude options (either in a new DB, new CF, SetOptions, etc.) and haven't yet aged out of that time window. This allows us to remove a bunch of work-arounds in tests. * For new DBs using preserve/preclude options, automatically reserve some sequence numbers and pre-map them to cover the time span back to the preserve/preclude cut-off time. In the future, this will allow us to import data from another DB by key, value, and write time by assigning an appropriate seqno in this DB for that write time. Note that the pre-population (historical mappings) does not happen if the original options at DB Open time do not have preserve/preclude, so it is recommended to create initial column families at that time with create_missing_column_families, to take advantage of this (future) feature. (Adding these historical mappings after DB Open would risk non-monotonic seqno_to_time_mapping, which is dubious if not dangerous.) Recommended follow-up: * Solve existing race conditions (not memory safety) where parallel operations like CreateColumnFamily or SetDBOptions could leave the wrong setting in effect. * Make SeqnoToTimeMapping more gracefully handle a possible case in which too many mappings are added for the time range of concern. It seems like there could be cases where data is massively excluded from the cold tier because of entries falling off the front of the mapping list (causing GetProximalSeqnoBeforeTime() to return 0). (More investigation needed.) No release note for the minor bug fix because this is still an experimental feature with limited usage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11922 Test Plan: tests added / updated Reviewed By: jowlyzhang Differential Revision: D49956563 Pulled By: pdillinger fbshipit-source-id: 92beb918c3a298fae9ca8e509717b1067caa1519 |
||
|
Peter Dillinger
|
141b872bd4 |
Improve efficiency of create_missing_column_families, light refactor (#11920)
Summary: In preparing some seqno_to_time_mapping improvements, I found that some of the wrap-up work for creating column families was unnecessarily repeated in the case of DB::Open with create_missing_column_families. This change fixes that (`CreateColumnFamily()` -> `CreateColumnFamilyImpl()` in `DBImpl::Open()`), motivated by avoiding repeated calls to `RegisterRecordSeqnoTimeWorker()` but with the side benefit of avoiding repeated calls to `WriteOptionsFile()` for each CF. Also in this change: * Add a `Status::UpdateIfOk()` function for combining statuses in a common pattern * Rename `max_time_duration` -> `min_preserve_seconds` (include units as much as possible) * Improved comments in several places Pull Request resolved: https://github.com/facebook/rocksdb/pull/11920 Test Plan: tests added / updated Reviewed By: jaykorean Differential Revision: D49919147 Pulled By: pdillinger fbshipit-source-id: 3d0318c1d070c842c5331da0a5b415caedc104f1 |
||
|
Andrew Kryczka
|
10fd05e394 |
Give retry flushes their own functions (#11903)
Summary: Recovery triggers flushes for very different scenarios: (1) `FlushReason::kErrorRecoveryRetryFlush`: a flush failed (2) `FlushReason::kErrorRecovery`: a WAL may be corrupted (3) `FlushReason::kCatchUpAfterErrorRecovery`: immutable memtables may have accumulated The old code called called `FlushAllColumnFamilies()` in all cases, which uses manual flush functions: `AtomicFlushMemTables()` and `FlushMemTable()`. Forcing flushing the latest data on all CFs was useful for (2) because it ensures all CFs move past the corrupted WAL. However, those code paths were overkill for (1) and (3), where only already-immutable memtables need to be flushed. There were conditionals to exclude some of the extraneous logic but I found there was still too much happening. For example, both of the manual flush functions enter the write thread. Entering the write thread is inconvenient because then we can't allow stalled writes to wait on a retrying flush to finish. Instead of continuing down the path of adding more conditionals to the manual flush functions, this PR introduces a dedicated function for cases (1) and (3): `RetryFlushesForErrorRecovery()`. Also I cleaned up the manual flush functions to remove existing conditionals for these cases as they're no longer needed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11903 Reviewed By: cbi42 Differential Revision: D49693812 Pulled By: ajkr fbshipit-source-id: 7630ac539b9d6c92052c13a3cdce53256134d990 |
||
|
Peter Dillinger
|
02443dd93f |
Refactor, clean up, fixes, and more testing for SeqnoToTimeMapping (#11905)
Summary: This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up** However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping. Functional fixes / changes: * This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc * That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.) * Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function. * Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples. Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work. An apparent compaction bug is revealed in PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909 Cosmetic / code safety things (not exhaustive): * Fix some confusing names. * `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name. * Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing. * Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions. * Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind. * (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.) * A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`). * Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905 Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others. Reviewed By: jowlyzhang Differential Revision: D49755592 Pulled By: pdillinger fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51 |
||
|
Changyu Bi
|
1c871a4d86 |
Only flush after recovery for retryable IOError (#11880)
Summary: https://github.com/facebook/rocksdb/issues/11872 causes a unit test to start failing with the error message below. The cause is that the additional call to `FlushAllColumnFamilies()` in `DBImpl::ResumeImpl()` can run while DB is closing. More detailed explanation: there are two places where we call `ResumeImpl()`: 1. in `ErrorHandler::RecoverFromBGError`, for manual resume or recovery from errors like OutOfSpace through sst file manager, and 2. in `Errorhandler::RecoverFromRetryableBGIOError`, for error recovery from errors like flush failure due to retryable IOError. This is tracked by `ErrorHandler::recovery_thread_`. Here is how DB close waits for error recovery: |
||
|
Changyu Bi
|
0086809601 |
Fix a bug with atomic_flush that causes DB to stuck after a flush failure (#11872)
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable:
|
||
|
Levi Tamasi
|
12d9386a4f |
Return a special OK status when the number of merge operands exceeds a threshold (#11870)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11870 Having a large number of merge operands applied at query time can have a significant effect on performance; therefore, applications might want limit the number of deltas for any given key. However, there is currently no way to establish the number of operands for certain types of queries. The ticker `READ_NUM_MERGE_OPERANDS` only provides aggregate (not per-read) information. The `PerfContext` counters `internal_merge_count` and `internal_merge_point_lookup_count` can be used to get this information on a per-query basis for iterators and single point lookups; however, there is no per-key breakdown for `MultiGet` type APIs. The patch addresses this issue by introducing a special kind of OK status which signals that an application-defined threshold on the number of merge operands has been exceeded for a given key. The threshold can be specified on a per-query basis using a new field in `ReadOptions`. Reviewed By: jaykorean Differential Revision: D49522786 fbshipit-source-id: 4265b3848d1be5ff313a3e8fb604ddf56411dd2c |
||
|
dengyan
|
0dac75d542 |
Fix a bug in MultiGet when skip_memtable is true (#11700)
Summary: When skip_memtable is true in MultiGetImpl, The lookup_current is always false, Causes data to be unable to be queried in super_version->current。 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11700 Reviewed By: anand1976 Differential Revision: D49342877 Pulled By: jowlyzhang fbshipit-source-id: 270a36d049b4cb7fd151a1fa3080300310111271 |
||
|
Jay Huh
|
cff6490bc4 |
Add IOActivity.kMultiGetEntity (#11842)
Summary: - As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`. ## Minor Refactor - Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`. - I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842 Test Plan: - Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing. ``` python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 ``` Reviewed By: ltamasi Differential Revision: D49329575 Pulled By: jaykorean fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923 |
||
|
leipeng
|
68ce5d84f6 |
Add new Iterator API Refresh(const snapshot*) (#10594)
Summary: This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically. The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`. This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594 Test Plan: * New unit tests. * Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case. TODO in a following PR: * Stress test Iterator::Refresh() to different snapshots or no snapshot. Reviewed By: ajkr Differential Revision: D48456896 Pulled By: cbi42 fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779 |
||
|
Hui Xiao
|
ed913513bd |
Fix a bug of rocksdb.file.read.verify.file.checksums.micros not being populated (#11836)
Summary: **Context/Summary:** `rocksdb.file.read.verify.file.checksums.micros ` was added in https://github.com/facebook/rocksdb/pull/11444 but the related path was not populated with statistics and clock object correctly so the actual statistics collection didn't happen. This PR fixed it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11836 Test Plan: Setup: ``` ./db_bench --benchmarks="fillrandom" --file_checksum=1 --num=100 --db=/dev/shm/rocksdb ``` Run: ``` ./db_bench --use_existing_db=1 --benchmarks="verifyfilechecksums" --file_checksum=1 --num=100 --db=/dev/shm/rocksdb --statistics=1 --stats_level=4 ``` Post-PR ``` rocksdb.file.read.verify.file.checksums.micros P50 : 9.000000 P95 : 9.000000 P99 : 9.000000 P100 : 9.000000 COUNT : 1 SUM : 9 ``` Pre-PR ``` rocksdb.file.read.verify.file.checksums.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` Reviewed By: ajkr Differential Revision: D49293378 Pulled By: hx235 fbshipit-source-id: 1acd8b828c28e088d0c5d63897f53cd180b82f42 |
||
|
Yu Zhang
|
e1fd348b92 |
Fix a bug in multiget for cleaning up SuperVersion (#11830)
Summary: When `MultiGet` acquires `SuperVersion` via locking the db mutex and get the current `ColumnFamilyData::super_version_`, its corresponding cleanup logic is not correctly done. It's currently doing this: `MultiGetColumnFamilyData::cfd->GetSuperVersion().Unref()` This operates on the most recent `SuperVersion` without locking db mutex , which is not thread safe by itself. And this unref operation is intended for the originally acquired `SuperVersion` instead of the current one. Because a race condition could happen where a new `SuperVersion` is installed in between this `MultiGet`'s ref and unref. When this race condition does happen, it's not sufficient to just unref the `SuperVersion`, `DBImpl::CleanupSuperVersion` should be called instead to properly clean up the `SuperVersion` had this `MultiGet` call be its last reference holder. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11830 Test Plan: `make all check` Added a unit test that would originally fail Reviewed By: ltamasi Differential Revision: D49287715 Pulled By: jowlyzhang fbshipit-source-id: 8353636ee11b2e90d85c677a96a92360072644b0 |
||
|
Jay Huh
|
f2b623bcc1 |
GetEntity Support for ReadOnlyDB and SecondaryDB (#11799)
Summary: `GetEntity` API support for ReadOnly DB and Secondary DB. - Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`) - Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity` - `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally. - `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()` - Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`. - Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799 Test Plan: **Unit Tests** - Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup. - Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()` - `make -j64 check` **Crash Tests** - `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter val=10` - `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 ` - `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter val=10` Reviewed By: ltamasi Differential Revision: D49037040 Pulled By: jaykorean fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b |
||
|
马越
|
3c27f56d0b |
Fix the problem that some keys of ClipColumnFamily may not be deleted (#11811)
Summary: When executing ClipColumnFamily, if end_key is equal to largest_user_key in a file, this key will not be deleted. So we need to change less than to less than or equal to Pull Request resolved: https://github.com/facebook/rocksdb/pull/11811 Reviewed By: ajkr Differential Revision: D49206936 Pulled By: cbi42 fbshipit-source-id: 3e8bcb7b52040a9b4d1176de727616cc298d3445 |
||
|
Jonah Gao
|
84d335b619 |
Remove an unused variable: last_stats_dump_time_microsec_ (#11824)
Summary:
`last_stats_dump_time_microsec_` is not used after initialization.
I guess that it was previously used to implement periodically dumping stats,
but this functionality has now been delegated to the `PeriodicTaskScheduler`.
|
||
|
Yu Zhang
|
39a4ff2cab |
Track full_history_ts_low per SuperVersion (#11784)
Summary: As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion. There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784 Test Plan: `make all check` // Checks success scenario really provide the read consistency attribute as mentioned above. `./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*` // Checks failure scenario cleans up SuperVersion properly. `./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*` `./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*` `./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*` Reviewed By: ltamasi Differential Revision: D48894795 Pulled By: jowlyzhang fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6 |
||
|
Yu Zhang
|
fc58c7c62a |
Add UDT support in SstFileDumper (#11757)
Summary: For a SST file that uses user-defined timestamp aware comparators, if a lower or upper bound is set, sst_dump tool doesn't handle it well. This PR adds support for that. While working on this `MaybeAddTimestampsToRange` is moved to the udt_util.h file to be shared. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11757 Test Plan: make all check for changes in db_impl.cc and db_impl_compaction_flush.cc for changes in sst_file_dumper.cc, I manually tested this change handles specifying bounds for UDT use cases. It probably should have a unit test file eventually. Reviewed By: ltamasi Differential Revision: D48668048 Pulled By: jowlyzhang fbshipit-source-id: 1560465f40e44668d6d82a7439fe9012be0e74a8 |
||
|
Yu Zhang
|
4234a6a301 |
Increase full_history_ts_low when flush happens during recovery (#11774)
Summary: This PR adds a missing piece for the UDT in memtable only feature, which is to automatically increase `full_history_ts_low` when flush happens during recovery. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11774 Test Plan: Added unit test make all check Reviewed By: ltamasi Differential Revision: D48799109 Pulled By: jowlyzhang fbshipit-source-id: fd681ed66d9d40904ca2c919b2618eb692686035 |
||
|
Jay Huh
|
793a786fa3 |
Fix for unchecked status in CancelAllBackgroundWork (#11699)
Summary: ## Summary PR https://github.com/facebook/rocksdb/issues/11497 introduced this. Status from `CancelPeriodicTaskScheduler()` is unchecked and causing test failure like https://app.circleci.com/pipelines/github/facebook/rocksdb/30743/workflows/24443a9b-6fc3-41e6-86c1-992d766eb1ec/jobs/642419 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11699 Test Plan: Existing tests Reviewed By: cbi42 Differential Revision: D48287188 Pulled By: jaykorean fbshipit-source-id: b6bcf6e3c3c47f126c34c24a3dfed2649635cc8c |
||
|
Jay Huh
|
52816ff64d |
Close DB option in WaitForCompact() (#11497)
Summary: Context: As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `close_db` option in `WaitForCompactOptions` to close DB after waiting for compactions to finish. Must be set to true to close the DB upon compactions finishing. 1. `bool close_db = false` added to `WaitForCompactOptions` 2. Introduced `CancelPeriodicTaskSchedulers()` and moved unregistering PeriodicTaskSchedulers to it.`CancelAllBackgroundWork()` calls it now. 3. When close_db option is on, unpersisted data (data in memtable when WAL is disabled) will be flushed in `WaitForCompact()` if flush option is not on (and `mutable_db_options_.avoid_flush_during_shutdown` is not true). The unpersisted data flush in `CancelAllBackgroundWork()` will be skipped because `shutting_down_` flag will be set true before calling `Close()`. 4. Atomic boolean `reject_new_background_jobs_` is introduced to prevent new background jobs from being added during the short period of time after waiting is done and before `shutting_down_` is set by `Close()`. 5. `WaitForCompact()` now waits for recovery in progress to complete as well. (flush operations from WAL -> L0 files) 6. Added `close_db_` cases to all existing `WaitForCompactTests` 7. Added a scenario to `DBBasicTest::DBClose` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11497 Test Plan: - Existing DBCompactionTests - `WaitForCompactWithOptionToFlushAndCloseDB` added - Added a scenario to `DBBasicTest::DBClose` Reviewed By: pdillinger, jowlyzhang Differential Revision: D46337560 Pulled By: jaykorean fbshipit-source-id: 0f8c7ee09394847f2af5ea4bdd331b47bcdef0b0 |
||
|
Yu Zhang
|
7cdbce4564 |
Add UDT support in API DB::GetApproximateMemTableStats (#11689)
Summary: This API should consider the case when user-defined timestamp is enabled. Also added some documentation to some related API to clarify the usage in the case when user-defined timestamp is enabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11689 Test Plan: Unit test added ``` make check ./db_with_timestamp_basic_test --gtest_filter=*GetApproximateSizes* ``` Reviewed By: ltamasi Differential Revision: D48208568 Pulled By: jowlyzhang fbshipit-source-id: c5baa4a2923441f8ea3a3672c98223a43a3428dc |
||
|
Hui Xiao
|
9a034801ce |
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444)
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version:
|
||
|
Xinye Tao
|
d2b0652b32 |
compute compaction score once for a batch of range file deletes (#10744)
Summary: Only re-calculate compaction score once for a batch of deletions. Fix performance regression brought by https://github.com/facebook/rocksdb/pull/8434. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10744 Test Plan: In one of our production cluster that recently upgraded to RocksDB 6.29, it takes more than 10 minutes to delete files in 30,000 ranges. The RocksDB instance contains approximately 80,000 files. After this patch, the duration reduces to 100+ ms, which is on par with RocksDB 6.4. Cherry-picking downstream PR: https://github.com/tikv/rocksdb/pull/316 Signed-off-by: tabokie <xy.tao@outlook.com> Reviewed By: cbi42 Differential Revision: D48002581 Pulled By: ajkr fbshipit-source-id: 7245607ee3ad79c53b648a6396c9159f166b9437 |
||
|
Andrew Kryczka
|
4500a0d6ec |
Avoid an std::map copy in persistent stats (#11681)
Summary: An internal user reported this copy showing up in a CPU profile. We can use move instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11681 Differential Revision: D48103170 Pulled By: ajkr fbshipit-source-id: 083d6470181a0041bb5275b657aa61bee23a3729 |
||
|
Peter Dillinger
|
7a1b0207e6 |
format_version=6 and context-aware block checksums (#9058)
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
|
||
|
Yu Zhang
|
c24ef26ca7 |
Support switching on / off UDT together with in-Memtable-only feature (#11623)
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
|
||
|
mayue.fight
|
fa878a0107 |
Support to create a CF by importing multiple non-overlapping CFs (#11378)
Summary: The original Feature Request is from [https://github.com/facebook/rocksdb/issues/11317](https://github.com/facebook/rocksdb/issues/11317). Flink uses rocksdb as the state backend, all DB options are the same, and the keys of each DB instance are adjacent and there is no key overlap between two db instances. In the Flink rescaling scenario, it is necessary to quickly split the DB according to a certain key range or quickly merge multiple DBs into one. This PR is mainly used to quickly merge multiple DBs into one. We hope to extend the function of `CreateColumnFamilyWithImports` to support creating ColumnFamily by importing multiple ColumnFamily with no overlapping keys. The import logic is almost the same as `CreateColumnFamilyWithImport`, but it will check whether there is key overlap between CF when importing. The import will fail if there are key overlaps. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11378 Reviewed By: ajkr Differential Revision: D46413709 Pulled By: cbi42 fbshipit-source-id: 846d0049fad11c59cf460fa846c345b26c658dfb |
||
|
mayue.fight
|
8d8eb0e77e |
Support Clip DB to KeyRange (#11379)
Summary: This PR is part of the request https://github.com/facebook/rocksdb/issues/11317. (Another part is https://github.com/facebook/rocksdb/pull/11378) ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones). This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs. When Calling ClipDB [begin, end), there are the following steps 1. Quickly and directly delete files without overlap DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr) 2. Delete the Key outside the range Delete[smallest_key, begin) + Delete[end, largest_key] 3. Delete the tombstone through Manul Compact CompactRange(option, nullptr, nullptr) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379 Reviewed By: ajkr Differential Revision: D45840358 Pulled By: cbi42 fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4 |