Summary:
- Make `compression_per_level` dynamical changeable with `SetOptions`;
- Fix a bug that `compression_per_level` is not used for flush;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9658
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D34700749
Pulled By: jay-zhuang
fbshipit-source-id: a23b9dfa7ad03d393c1d71781d19e91de796f49c
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
Added ParseType, SerializeType, and TypesAreEqual methods to OptionTypeInfo. These methods can be used for serialization and deserialization of basic types.
Change the MutableCF/DB Options to use this format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8249
Reviewed By: jay-zhuang
Differential Revision: D28351190
Pulled By: mrambacher
fbshipit-source-id: 72a78643b804f2f0bf59c32ffefa63346672ad16
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
This patch simply adds a couple of options that will enable users to
configure garbage collection when using the integrated BlobDB
implementation. The actual GC logic will be added in a separate step.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7661
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24906544
Pulled By: ltamasi
fbshipit-source-id: ee0e056a712a4b4475cd90de8b27d969bd61b7e1
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467
Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.
Reviewed By: riversand963
Differential Revision: D24010683
fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420
Test Plan:
1. make check -j64
2. Add a new test case
Reviewed By: ajkr
Differential Revision: D23835028
Pulled By: akankshamahajan15
fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
SST Partitioner interface that allows to split SST files during compactions.
It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957
Reviewed By: ajkr
Differential Revision: D22461239
fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615
Test Plan: Add a unit test to make sure that SetOptions() can change the options.
Reviewed By: riversand963
Differential Revision: D20755951
fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
default constructor not used or even defined
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6086
Differential Revision: D18695669
Pulled By: pdillinger
fbshipit-source-id: 6b6ac46029f4fb6edf1c11ee6ce1d9f172b2eaf2
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
Let me know if more test coverage is needed
Closes https://github.com/facebook/rocksdb/pull/3213
Differential Revision: D6457165
Pulled By: miasantreble
fbshipit-source-id: 3f944abff28aa7775237f1c4f61c64ccbad4eea9
Summary:
The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2).
This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages.
From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff".
This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR.
For now, what's done here according to initial discussions:
Preserving deletes:
- We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion.
- I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum.
- Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum.
Iterator changes:
- couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum.
TableCache changes:
- I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span.
What's left:
- Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type.
Closes https://github.com/facebook/rocksdb/pull/2999
Differential Revision: D6175602
Pulled By: mikhail-antonov
fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
Summary:
ColumnFamilyOptions::compaction_options_fifo and all its sub-fields can be set dynamically now.
Some of the ways in which the fifo compaction options can be set are:
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024}"}})`
- `SetOptions({{"compaction_options_fifo", "{ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024;ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=51;ttl=49;allow_compaction=true;}"}})`
Most of the code has been made generic enough so that it could be reused later to make universal options (and other such nested defined-types) dynamic with very few lines of parsing/serializing code changes.
Introduced a few new functions like `ParseStruct`, `SerializeStruct` and `GetStringFromStruct`.
The duplicate code in `GetStringFromDBOptions` and `GetStringFromColumnFamilyOptions` has been moved into `GetStringFromStruct`. So they become just simple wrappers now.
Closes https://github.com/facebook/rocksdb/pull/3006
Differential Revision: D6058619
Pulled By: sagar0
fbshipit-source-id: 1e8f78b3374ca5249bb4f3be8a6d3bb4cbc52f92
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
