Summary:
This PR adds user property collector factory `CompactForTieringCollectorFactory` to support observe SST file and mark it as need compaction for fast tracking data to the proper tier.
A triggering ratio `compaction_trigger_ratio_` can be configured to achieve the following:
1) Setting the ratio to be equal to or smaller than 0 disables this collector
2) Setting the ratio to be within (0, 1] will write the number of observed eligible entries into a user property and marks a file as need-compaction when aforementioned condition is met.
3) Setting the ratio to be higher than 1 can be used to just writes the user table property, and not mark any file as need compaction.
For a column family that does not enable tiering feature, even if an effective configuration is provided, this collector is still disabled. For a file that is already on the last level, this collector is also disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12760
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D58734976
Pulled By: jowlyzhang
fbshipit-source-id: 6daab2c4f62b5c6689c3c03e3b3907bbbe6b7a81
Summary:
To make sure `TimedPut` are placed on proper tier before and when it becomes eligible for cold tier
1) flush and compaction need to keep relevant seqno to time mapping for not just the sequence number contained in internal keys, but also preferred sequence number for `TimedPut` entries.
This PR also fix some bugs in for handling `TimedPut` during compaction:
1) dealing with an edge case when a `TimedPut` entry's internal key is the right bound for penultimate level, the internal key after swapping in its preferred sequence number will fall outside of the penultimate range because preferred sequence number is smaller than its original sequence number. The entry however is still safe to be placed on penultimate level, so we keep track of `TimedPut` entry's original sequence number for this check. The idea behind this is that as long as it's safe for the original key to be placed on penultimate level, it's safe for the entry with swapped preferred sequence number to be placed on penultimate level too. Because we only swap in preferred sequence number when that entry is visible to the earliest snapshot and there is no other data points with the same user key in lower levels. On the other hand, as long as it's not safe for the original key to be placed on penultimate level, we will not place the entry after swapping the preferred seqno on penultimate level either.
2) the assertion that preferred seqno is always bigger than original sequence number may fail if this logic is only exercised after sequence number is zeroed out. We adjust the assertion to handle that case too. In this case, we don't swap in the preferred seqno but will adjust the its type to `kTypeValue`.
3) there was a special case handling for when range deletion may end up incorrectly covering an entry if preferred seqno is swapped in. But it missed the case that if the original entry is already covered by range deletion. The original handling will mistakenly output the entry instead of omitting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12543
Test Plan:
./tiered_compaction_test --gtest_filter="PrecludeLastLevelTest.PreserveTimedPutOnPenultimateLevel"
./compaction_iterator_test --gtest_filter="*TimedPut*"
Reviewed By: pdillinger
Differential Revision: D56195096
Pulled By: jowlyzhang
fbshipit-source-id: 37ebb09d2513abbd9e90cda0217e26874584b8f3
Summary:
This PR adds support for `TimedPut` API. We introduced a new type `kTypeValuePreferredSeqno` for entries added to the DB via the `TimedPut` API.
The life cycle of such an entry on the write/flush/compaction paths are:
1) It is initially added to memtable as:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, write_unix_time}`
2) When it's flushed to L0 sst files, it's converted to:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, preferred_seqno}`
when we have easy access to the seqno to time mapping.
3) During compaction, if certain conditions are met, we swap in the `preferred_seqno` and the entry will become:
`<user_key, preferred_seqno, kTypeValue>: value`. This step helps fast track these entries to the cold tier if they are eligible after the sequence number swap.
On the read path:
A `kTypeValuePreferredSeqno` entry acts the same as a `kTypeValue` entry, the unix_write_time/preferred seqno part packed in value is completely ignored.
Needed follow ups:
1) The seqno to time mapping accessible in flush needs to be extended to cover the `write_unix_time` for possible `kTypeValuePreferredSeqno` entries. This also means we need to track these `write_unix_time` in memtable.
2) Compaction filter support for the new `kTypeValuePreferredSeqno` type for feature parity with other `kTypeValue` and equivalent types.
3) Stress test coverage for the feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12419
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D54920296
Pulled By: jowlyzhang
fbshipit-source-id: c8b43f7a7c465e569141770e93c748371ff1da9e
Summary:
The test failure in https://github.com/facebook/rocksdb/issues/11909 shows that we may compact keys outside of internal key range of penultimate level input files from last level to penultimate level, which can potentially cause overlapping files in the penultimate level. This PR updates the `Compaction::WithinPenultimateLevelOutputRange()` to check internal key range instead of user key.
Other fixes:
* skip range del sentinels when deciding output level for tiered compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12063
Test Plan:
- existing unit tests
- apply the fix to https://github.com/facebook/rocksdb/issues/11905 and run `./tiered_compaction_test --gtest_filter="*RangeDelsCauseFileEndpointsToOverlap*"`
Reviewed By: ajkr
Differential Revision: D51288985
Pulled By: cbi42
fbshipit-source-id: 70085db5f5c3b15300bcbc39057d57b83fd9902a
Summary:
... to improve data integrity validation during compaction.
A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.
For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.
For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571
Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`
Reviewed By: ajkr
Differential Revision: D47131965
Pulled By: cbi42
fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
Summary:
This PR implements the originally disabled `Merge()` APIs when user-defined timestamp is enabled.
Simplest usage:
```cpp
// assume string append merge op is used with '.' as delimiter.
// ts1 < ts2
db->Put(WriteOptions(), "key", ts1, "v0");
db->Merge(WriteOptions(), "key", ts2, "1");
ReadOptions ro;
ro.timestamp = &ts2;
db->Get(ro, "key", &value);
ASSERT_EQ("v0.1", value);
```
Some code comments are added for clarity.
Note: support for timestamp in `DB::GetMergeOperands()` will be done in a follow-up PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10819
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40603195
Pulled By: riversand963
fbshipit-source-id: f96d6f183258f3392d80377025529f7660503013
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
Support per_key_placement for last level compaction, which will
be used for tiered compaction.
* compaction iterator reports which level a key should output to;
* compaction get the output level information and check if it's safe to
output the data to penultimate level;
* all compaction output files will be installed.
* extra internal compaction stats added for penultimate level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9964
Test Plan:
* Unittest
* db_bench, no significate difference: https://gist.github.com/jay-zhuang/3645f8fb97ec0ab47c10704bb39fd6e4
* microbench manual compaction no significate difference: https://gist.github.com/jay-zhuang/ba679b3e89e24992615ee9eef310e6dd
* run the db_stress multiple times (not covering the new feature) looks good (internal: https://fburl.com/sandcastle/9w84pp2m)
Reviewed By: ajkr
Differential Revision: D36249494
Pulled By: jay-zhuang
fbshipit-source-id: a96da57c8031c1df83e4a7a8567b657a112b80a3
Summary:
The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds
a new API called `PutEntity` that can be used to write a wide-column entity
to the database. The new API is added to both `DB` and `WriteBatch`. Note
that currently there is no way to retrieve these entities; more precisely, all
read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they
encounter a wide-column entity that is required to answer a query. Read-side
support (as well as other missing functionality like `Merge`, compaction filter,
and timestamp support) will be added in later PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37369748
Pulled By: ltamasi
fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d
Summary:
As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`.
Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070
Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test).
Reviewed By: ajkr
Differential Revision: D36949133
Pulled By: littlepig2013
fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821
Summary:
PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete.
For some of existing use cases, it is desirable to have a transition during which compaction will not fail
if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow
application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again.
In a future release, the option will be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36333672
Pulled By: riversand963
fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
**This PR does not affect the functionality of `DB` and write-committed transactions.**
`CompactionIterator` uses `KeyCommitted(seq)` to determine if a key in the database is committed.
As the name 'write-committed' implies, if write-committed policy is used, a key exists in the database only if
it is committed. In fact, the implementation of `KeyCommitted()` is as follows:
```
inline bool KeyCommitted(SequenceNumber seq) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(seq, kMaxSequence) == SnapshotCheckerResult::kInSnapshot;
}
```
With that being said, we focus on write-prepared/write-unprepared transactions.
A few notes:
- A key can exist in the db even if it's uncommitted. Therefore, we rely on `snapshot_checker_` to determine data visibility. We also require that all writes go through transaction API instead of the raw `WriteBatch` + `Write`, thus at most one uncommitted version of one user key can exist in the database.
- `CompactionIterator` outputs a key as long as the key is uncommitted.
Due to the above reasons, it is possible that `CompactionIterator` decides to output an uncommitted key without
doing further checks on the key (`NextFromInput()`). By the time the key is being prepared for output, the key becomes
committed because the `snapshot_checker_(seq, kMaxSequence)` becomes true in the implementation of `KeyCommitted()`.
Then `CompactionIterator` will try to zero its sequence number and hit assertion error if the key is a tombstone.
To fix this issue, we should make the `CompactionIterator` see a consistent view of the input keys. Note that
for write-prepared/write-unprepared, the background flush/compaction jobs already take a "job snapshot" before starting
processing keys. The job snapshot is released only after the entire flush/compaction finishes. We can use this snapshot
to determine whether a key is committed or not with minor change to `KeyCommitted()`.
```
inline bool KeyCommitted(SequenceNumber sequence) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(sequence, job_snapshot_) ==
SnapshotCheckerResult::kInSnapshot;
}
```
As a result, whether a key is committed or not will remain a constant throughout compaction, causing no trouble
for `CompactionIterator`s assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9830
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35561162
Pulled By: riversand963
fbshipit-source-id: 0e00d200c195240341cfe6d34cbc86798b315b9f
Summary:
Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0.
This PR removes dead code related to these two removed options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D35517950
Pulled By: riversand963
fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
For multiple versions (ts + seq) of the same user key, if they cross the boundary of `full_history_ts_low_`,
we should retain the version that is visible to the `full_history_ts_low_`. Namely, we keep the internal key
with the largest timestamp smaller than `full_history_ts_low`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9116
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32261514
Pulled By: riversand963
fbshipit-source-id: e10f47c254c04c05261440051e4f50cb7d95474e
Summary:
There were three implementations of VectorIterator (util/vector_iterator, test_util/testutil.h and LoggingForwardVectorIterator). Merged them into one class to increase code coverage/testing and reduce duplication.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8901
Reviewed By: pdillinger
Differential Revision: D31022673
Pulled By: mrambacher
fbshipit-source-id: 8e3acbd2dfd60b4df609d02cc72846de2389d531
Summary:
Added support for SingleDelete for user-defined timestamps. Users can now Get and Iterate over keys deleted with SingleDelete. It also includes changes in CompactionIterator which preserves the same user key with different timestamps, unless the timestamp is below a certain threshold full_history_ts_low.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8921
Test Plan: Added new unit tests
Reviewed By: riversand963
Differential Revision: D31098191
Pulled By: akankshamahajan15
fbshipit-source-id: 78a59ef4b4884ae324fcd10f56e62a27d5ee2f49
Summary:
In debug mode, we are seeing assertion failure as follows
```
db/compaction/compaction_iterator.cc:980: void rocksdb::CompactionIterator::PrepareOutput(): \
Assertion `ikey_.type != kTypeDeletion && ikey_.type != kTypeSingleDeletion' failed.
```
It is caused by releasing earliest snapshot during compaction between the execution of
`NextFromInput()` and `PrepareOutput()`.
In one case, as demonstrated in unit test `WritePreparedTransaction.ReleaseEarliestSnapshotDuringCompaction_WithSD2`,
incorrect result may be returned by a following range scan if we disable assertion, as in opt compilation
level: the SingleDelete marker's sequence number is zeroed out, but the preceding PUT is also
outputted to the SST file after compaction. Due to the logic of DBIter, the PUT will not be
skipped and will be returned by iterator in range scan. https://github.com/facebook/rocksdb/issues/8661 illustrates what happened.
Fix by taking a more conservative approach: make compaction zero out sequence number only
if key is in the earliest snapshot when the compaction starts.
Another assertion failure is
```
Assertion `current_user_key_snapshot_ == last_snapshot' failed.
```
It's caused by releasing the snapshot between the PUT and SingleDelete during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8608
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D30145645
Pulled By: riversand963
fbshipit-source-id: 699f58e66faf70732ad53810ccef43935d3bbe81
Summary:
The patch builds on `BlobGarbageMeter` and `BlobCountingIterator`
(introduced in https://github.com/facebook/rocksdb/issues/8426 and
https://github.com/facebook/rocksdb/issues/8443 respectively)
and ties it all together. It measures the amount of garbage
generated by a compaction and logs the corresponding `BlobFileGarbage`
records as part of the compaction job's `VersionEdit`. Note: in order
to have accurate results, `kRemoveAndSkipUntil` for compaction filters
is implemented using iteration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8450
Test Plan: Ran `make check` and the crash test script.
Reviewed By: jay-zhuang
Differential Revision: D29338207
Pulled By: ltamasi
fbshipit-source-id: 4381c432ac215139439f6d6fb801a6c0e4d8c128
Summary:
Added the ability to cancel an in-progress range compaction by storing to an atomic "canceled" variable pointed to within the CompactRangeOptions structure.
Tested via two tests added to db_tests2.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8351
Reviewed By: ajkr
Differential Revision: D28808894
Pulled By: ddevec
fbshipit-source-id: cb321361c9e23b084b188bb203f11c375a22c2dd
Summary:
There is a small `SingleDelete` related optimization in the
`CompactionIterator` code: when a `SingleDelete`-`Put` pair is preserved
solely for the purposes of transaction conflict checking, the value
itself gets cleared. (This is referred to as "optimization 3" in the
`CompactionIterator` code.) Though the rest of the code got updated to
support `SingleDelete`'ing blob indexes, this chunk was apparently
missed, resulting in an assertion failure (or `ROCKS_LOG_FATAL` in release
builds) when triggered. Note: in addition to clearing the value, we also
need to update the type of the KV to regular value when dealing with
blob indexes here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7904
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D26118009
Pulled By: ltamasi
fbshipit-source-id: 6bf78043d20265e2b15c2e1ab8865025040c42ae
Summary:
The patch adds basic garbage collection support to the integrated BlobDB
implementation. Valid blobs residing in the oldest blob files are relocated
as they are encountered during compaction. The threshold that determines
which blob files qualify is computed based on the configuration option
`blob_garbage_collection_age_cutoff`, which was introduced in https://github.com/facebook/rocksdb/issues/7661 .
Once a blob is retrieved for the purposes of relocation, it passes through the
same logic that extracts large values to blob files in general. This means that
if, for instance, the size threshold for key-value separation (`min_blob_size`)
got changed or writing blob files got disabled altogether, it is possible for the
value to be moved back into the LSM tree. In particular, one way to re-inline
all blob values if needed would be to perform a full manual compaction with
`enable_blob_files` set to `false`, `enable_blob_garbage_collection` set to
`true`, and `blob_file_garbage_collection_age_cutoff` set to `1.0`.
Some TODOs that I plan to address in separate PRs:
1) We'll have to measure the amount of new garbage in each blob file and log
`BlobFileGarbage` entries as part of the compaction job's `VersionEdit`.
(For the time being, blob files are cleaned up solely based on the
`oldest_blob_file_number` relationships.)
2) When compression is used for blobs, the compression type hasn't changed,
and the blob still qualifies for being written to a blob file, we can simply copy
the compressed blob to the new file instead of going through decompression
and compression.
3) We need to update the formula for computing write amplification to account
for the amount of data read from blob files as part of GC.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7694
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25069663
Pulled By: ltamasi
fbshipit-source-id: bdfa8feb09afcf5bca3b4eba2ba72ce2f15cd06a
Summary:
`CompactionProxy` is currently both a concrete class used for actual `Compaction`s
and a base class that `FakeCompaction` (which is used in `compaction_iterator_test`)
is derived from. This is bad from an OO design standpoint, and also results in
`FakeCompaction` containing an (uninitialized and unused) `Compaction*` member.
The patch fixes this by making `CompactionProxy` a pure interface and introducing
a separate concrete class `RealCompaction` for non-test/non-fake compactions. It
also removes an unused parameter from the virtual method `level`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7662
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24907680
Pulled By: ltamasi
fbshipit-source-id: c100ecb1beef4b0ada35e799116c5bda71719ee7
Summary:
https://github.com/facebook/rocksdb/issues/7556 introduced support for compaction iterator to perform timestamp-aware garbage collection.
However, there was a bug. The comparison between `ikey_.user_key` and `current_user_key_` should happen
before `key_ = current_key_.SetInternalKey(key_, &ikey_);` (line 336 of compaction_iterator.cc).
Otherwise, after this line, `current_key_` is always the same as `ikey_.user_key`.
This PR also re-arranged the order of some data members because some of them are state variables of `CompactionIterator` while others are inputs from callers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7645
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24845028
Pulled By: riversand963
fbshipit-source-id: c7e79914832701462b86867e8463cd463b6c0c25
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
Add a threshold timestamp, full_history_ts_low_ of type `std::string*` to
`CompactionIterator`, so that RocksDB can also perform garbage collection during
compaction.
* If full_history_ts_low_ is nullptr, then compaction iterator does not perform
GC, preserving all timestamp history for all keys. Compaction iterator will
treat user key with different timestamps as different user keys.
* If full_history_ts_low_ is not nullptr, then compaction iterator performs
GC. GC will look at keys older than `*full_history_ts_low_` and determine their
eligibility based on factors including snapshots.
Current rules of GC:
* If an internal key is in the same snapshot as a previous counterpart
with the same user key, and this key is eligible for GC, and the key is
not single-delete or merge operand, then this key can be dropped. Note
that the previous internal key cannot be a merge operand either.
* If a tombstone is the most recent one in the earliest snapshot and it
is eligible for GC, and keyNotExistsBeyondLevel() is true, then this
tombstone can be dropped.
* If a tombstone is the most recent one in a snapshot and it is eligible
for GC, and the compaction is at bottommost level, then all other older
internal keys of the same user key must also be eligible for GC, thus
can be dropped
* Single-delete, delete-range and merge are not currently supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7556
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24507728
Pulled By: riversand963
fbshipit-source-id: 3c09c7301f41eed76dfcf4d1527e68cf6e0a8bb3
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420
Test Plan:
1. make check -j64
2. Add a new test case
Reviewed By: ajkr
Differential Revision: D23835028
Pulled By: akankshamahajan15
fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
Summary:
Fix few test cases and add them in ASSERT_STATUS_CHECKED build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7427
Test Plan:
1. ASSERT_STATUS_CHECKED=1 make -j48 check,
2. travis build for ASSERT_STATUS_CHECKED,
3. Without ASSERT_STATUS_CHECKED: make check -j64, CircleCI build and travis build
Reviewed By: pdillinger
Differential Revision: D23909983
Pulled By: akankshamahajan15
fbshipit-source-id: 42d7e4aea972acb9fcddb7ca73fcb82f93272434
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345
Test Plan: Tested using `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D23506369
Pulled By: ltamasi
fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
Summary:
- Closes https://github.com/facebook/rocksdb/issues/6490
- Currently MERGEs are converted to PUTs at bottom or compaction has reached the beginning of the key, this can wrongly cover a PUT future base case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7166
Test Plan:
- Automated: `make all check`
- Manual: With `allow_ingest_behind = true`, add Merge operations to a key then run compaction. Then run ingesting external files to make sure the base case is probably compacted with existing Merges.
Reviewed By: cheng-chang
Differential Revision: D23325425
Pulled By: ajkr
fbshipit-source-id: 3eb415eb7b381b5453e45245393566153b1abb68
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Yu Zhang
