mirror of https://github.com/facebook/rocksdb.git
306 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Changyu Bi
|
c90807d103 |
Inject retryable write IOError when writing to SST files in stress test (#11829)
Summary: * db_crashtest.py now may set `write_fault_one_in` to 500 for blackbox and whitebox simple test. * Error injection only applies to writing to SST files. Flush error will cause DB to pause background operations and auto-resume. Compaction error will just re-schedule later. * File ingestion and back up tests are updated to check if the result status is due to an injected error. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11829 Test Plan: a full round of whitebox simple and blackbox simple crash test * `python3 ./tools/db_crashtest.py whitebox/blackbox --simple --write_fault_one_in=500` Reviewed By: ajkr Differential Revision: D49256962 Pulled By: cbi42 fbshipit-source-id: 68e0c9648d8e03bad39c7672b25d5500fc286d97 |
|
|
Peter Dillinger
|
1c6faf3587 |
Make RibbonFilterPolicy::bloom_before_level mutable (SetOptions()) (#11838)
Summary: An internal user wants to be able to dynamically switch between Bloom and Ribbon filters, without a custom FilterPolicy. Making `filter_policy` mutable would actually make issue https://github.com/facebook/rocksdb/issues/10079 worse, because it would be a race on a pointer field, not just on scalars. As a reasonable compromise until that is fixed, I am enabling dynamic control over Bloom vs. Ribbon choice by making RibbonFilterPolicy::bloom_before_level mutable, and doing that safely by using an atomic. I've also slightly tweaked the interpretation of that field so that setting it to INT_MAX really means "always Bloom." Pull Request resolved: https://github.com/facebook/rocksdb/pull/11838 Test Plan: unit tests added/extended. crash test updated for SetOptions call and tested under TSAN with amplified probability (lower set_options_one_in). Reviewed By: ajkr Differential Revision: D49296284 Pulled By: pdillinger fbshipit-source-id: e4251c077510df9a9c719876f482448c0d15402a |
|
|
Andrew Kryczka
|
392d6957cd |
Added compaction read errors to `db_stress` (#11789)
Summary: - Fixed misspellings of "inject" - Made user read errors retryable when `FLAGS_inject_error_severity == 1` - Added compaction read errors when `FLAGS_read_fault_one_in > 0`. These are always retryable so that the DB will keep accepting writes - Reenabled setting `compaction_readahead_size` in crash test. The reason for disabling it was to "keep the test clean", which is not a good enough reason to skip testing it Pull Request resolved: https://github.com/facebook/rocksdb/pull/11789 Test Plan: With https://github.com/facebook/rocksdb/issues/11782 reverted, reproduced the bug: - Build: `make -j56 db_stress` - Command: `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --interval=10 --max_key=1000000` - Output: ``` stderr has error message: ***put or merge error: Corruption: Compaction number of input keys does not match number of keys processed.*** ``` Reviewed By: cbi42 Differential Revision: D48939994 Pulled By: ajkr fbshipit-source-id: a1efb799efecdfd5d9cfd185e4a6321db8fccfbb |
|
|
Akanksha Mahajan
|
6353c6e2fb |
Add new experimental ReadOption auto_readahead_size to db_bench and db_stress (#11729)
Summary: Same as title Pull Request resolved: https://github.com/facebook/rocksdb/pull/11729 Test Plan: make crash_test -j32 Reviewed By: anand1976 Differential Revision: D48534820 Pulled By: akankshamahajan15 fbshipit-source-id: 3a2a28af98dfad164b82ddaaf9fddb94c53a652e |
|
|
Fuat Basik
|
bc448e9c89 |
Run db_stress for final time to ensure un-interrupted validation (#11592)
Summary: In blackbox tests, db_stress command always run with timeout. Timeout can happen during validation, leaving some of the keys not checked. Since key validation is done in order, it is quite likely that keys those are towards to the end of the set are never validated. This PR adds a final execution, without timeout, to ensure validation is executed for all keys, at least once. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11592 Reviewed By: cbi42 Differential Revision: D48003998 Pulled By: hx235 fbshipit-source-id: 72543475a932f12cf0f57534b7e3b6e07e87080f |
|
|
Changyu Bi
|
c2aad555c3 |
Add `CompressionOptions::checksum` for enabling ZSTD checksum (#11666)
Summary:
Optionally enable zstd checksum flag (
|
|
|
Changyu Bi
|
d1ff401472 |
Delay bottommost level single file compactions (#11701)
Summary: For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions. * The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701 Test Plan: * Add two unit tests to test when bottommost_file_compaction_delay > 0. * Ran crash test with the new option. Reviewed By: jaykorean, ajkr Differential Revision: D48331564 Pulled By: cbi42 fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8 |
|
|
Andrew Kryczka
|
0b6ee88d51 |
clarify TODO for whitebox disable_wal=1 in db_crashtest.py (#11665)
Summary: See https://github.com/facebook/rocksdb/issues/11613 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11665 Reviewed By: hx235 Differential Revision: D48010507 Pulled By: ajkr fbshipit-source-id: 65c6d87d2c6ffc9d25f1d17106eae467ec528082 |
|
|
Jay Huh
|
b63018fb59 |
Wide Column Ingestion in CrashTest (#11697)
Summary: `PutEntity` is now supported in SST file writer (https://github.com/facebook/rocksdb/issues/11688). This PR enables ingestion of wide column data in the stress/crash tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11697 Test Plan: ``` python3 tools/db_crashtest.py blackbox --simple --duration=300 --ingest_external_file_one_in=2 --use_put_entity_one_in=2 --max_key=1048576 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0 --key_len_percent_dist="1,30,69" ``` Reviewed By: ltamasi Differential Revision: D48370719 Pulled By: jaykorean fbshipit-source-id: 5855d3112b37b2fb300d05e6df110d899855d77d |
|
|
Peter Dillinger
|
ef6f025563 |
Placeholder for AutoHyperClockCache, more (#11692)
Summary:
* The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation.
* Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache).
* Simplify some existing tests not to depend directly on cache type.
* Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation.
* Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test.
* Add another templated class BaseHyperClockCache to reduce future copy-paste
* Added ReportProblems support to cache_bench
* Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC:
```
2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17
```
In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692
Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in.
Reviewed By: jowlyzhang
Differential Revision: D48247413
Pulled By: pdillinger
fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
|
|
|
Hui Xiao
|
38ecfabed2 |
Remove comment about locking about TestIterateAgainstExpected (#11695)
Summary: **Context/Summary** After https://github.com/facebook/rocksdb/pull/11058, we no longer lock the key range to iterate in TestIterateAgainstExpected, except for working with timestamp feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11695 Test Plan: no code change Reviewed By: ajkr Differential Revision: D48276668 Pulled By: hx235 fbshipit-source-id: dc92a3708b2281dc737c0877fb755548bf03a9fc |
|
|
Hui Xiao
|
9a034801ce |
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444)
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version:
|
|
|
Vardhan
|
87a21d08fe |
Add an option to trigger flush when the number of range deletions reach a threshold (#11358)
Summary: Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358 Test Plan: * New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions` * Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions. Reviewed By: ajkr Differential Revision: D46582680 Pulled By: cbi42 fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da |
|
|
Peter Dillinger
|
7a1b0207e6 |
format_version=6 and context-aware block checksums (#9058)
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
|
|
|
Akanksha Mahajan
|
5187ac2af3 |
Add skip_tmpdir_check arg in crash script (#11539)
Summary: Add `skip_tmpdir_check` argument in crash script. If `tmp_dir` is on remote storage and exist, `isdir` will be false (checking on local storage) leading to exit. By passing `skip_tmpdir_check` with `crashtest.py`, the dir check can be skipped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11539 Test Plan: Ran locally Reviewed By: anand1976 Differential Revision: D46740456 Pulled By: akankshamahajan15 fbshipit-source-id: 8726882ef53d2c84b604c7515e84eda6d1bf797c |
|
|
Jay Huh
|
17d5200504 |
Stress/Crash Test for OptimisticTransactionDB (#11513)
Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960 |
|
|
akankshamahajan
|
bf9e864235 |
Update db_crashtest.py for support for dir creation on remote storage (#11448)
Summary: - add TEST_TMPDIR_EXPECTED env in crash test if expected dir is on different filesystem. If TEST_TMPDIR_EXPECTED is not specified, it'll fallback to default value of TEST_TMPDIR (Same as before) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11448 Test Plan: Ran locally Reviewed By: anand1976 Differential Revision: D45870268 Pulled By: akankshamahajan15 fbshipit-source-id: 52a7b961d3647dde023dcf7f20341558e8a5b528 |
|
|
Changyu Bi
|
62fc15f009 |
Block per key-value checksum (#11287)
Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940 |
|
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
|
|
Levi Tamasi
|
0efd7b4ba1 |
Extend the stress test coverage of MultiGetEntity (#11336)
Summary: Similarly to `GetEntity` prior to https://github.com/facebook/rocksdb/issues/11303, the `MultiGetEntity` API is currently only used in the DB verification logic of the stress tests. The patch introduces a new mode where all point lookups are performed using `MultiGetEntity`, and implements the corresponding logic in the non-batched, batched, and CF consistency tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11336 Test Plan: Ran simple blackbox tests for the various stress test flavors. Reviewed By: akankshamahajan15 Differential Revision: D44513285 Pulled By: ltamasi fbshipit-source-id: c3db098501bf875b6a356b09fc676a0268d92c35 |
|
|
Changyu Bi
|
601320164b |
Trivially move files down when opening db with level_compaction_dynamic_l… (#11321)
Summary: …evel_bytes During DB open, if a column family uses level compaction with level_compaction_dynamic_level_bytes=true, trivially move its files down in the LSM such that the bottommost files are in Lmax, the second from bottommost level files are in Lmax-1 and so on. This is aimed to make it easier to migrate level_compaction_dynamic_level_bytes from false to true. Before this change, a full manual compaction is suggested for such migration. After this change, user can just restart DB to turn on this option. db_crashtest.py is updated to randomly choose value for level_compaction_dynamic_level_bytes. Note that there may still be too many unnecessary levels if a user is migrating from universal compaction or level compaction with a smaller level multiplier. A full manual compaction may still be needed in that case before some PR that automatically drain unnecessary levels like https://github.com/facebook/rocksdb/issues/3921 lands. Eventually we may want to change the default value of option level_compaction_dynamic_level_bytes to true. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11321 Test Plan: 1. Added unit tests. 2. Crash test: ran a variation of db_crashtest.py (like 32516507e77521ae887e45091b69139e32e8efb7) that turns level_compaction_dynamic_level_bytes on and off and switches between LC and UC for the same DB. TODO: Update `OptionChangeMigration`, either after this PR or https://github.com/facebook/rocksdb/issues/3921. Reviewed By: ajkr Differential Revision: D44341930 Pulled By: cbi42 fbshipit-source-id: 013de19a915c6a0502be569f07c4cc8f1c3c6be2 |
|
|
Peter Dillinger
|
204fcff751 |
HyperClockCache support for SecondaryCache, with refactoring (#11301)
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
|
|
|
Levi Tamasi
|
a72d55c99d |
Increase the stress test coverage of GetEntity (#11303)
Summary: The `GetEntity` API is currently used in the stress tests for verification purposes; this patch extends the coverage by adding a mode where all point lookups in the non-batched, batched, and CF consistency stress tests are done using this API. The PR also includes a bit of refactoring to eliminate some boilerplate code around the wide-column consistency checks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11303 Test Plan: Ran stress tests of the batched, non-batched, and CF consistency varieties. Reviewed By: akankshamahajan15 Differential Revision: D44148503 Pulled By: ltamasi fbshipit-source-id: fecdbfd3e65a459bbf16ab7aa7b9173e19240077 |
|
|
Yu Zhang
|
701a19cc83 |
Enable crash test for user-defined timestamp and BlobDB combination (#11163)
Summary: Enable the set of crash test for when user defined timestamp is enabled in combination with BlobDB. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11163 Test Plan: `make check` and `db_stress`/`db_crashtest.py` with various combinations. Reviewed By: ltamasi Differential Revision: D42906457 Pulled By: jowlyzhang fbshipit-source-id: 6bec6449a4213b536c787420ff30a7d17b676deb |
|
|
Peter Dillinger
|
94e3beec77 |
Cleanup, improve, stress test LockWAL() (#11143)
Summary: The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change: * Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use. * Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions) * Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability) * Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other. * Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads. * Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143 Test Plan: unit tests added / updated, added to stress/crash test Reviewed By: ajkr Differential Revision: D42848627 Pulled By: pdillinger fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4 |
|
|
Hui Xiao
|
b965a5a80e |
Add back Options::CompactionOptionsFIFO::allow_compaction to stress/crash test (#11063)
Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/10777 was reverted (https://github.com/facebook/rocksdb/pull/10999) due to internal blocker and replaced with a better fix https://github.com/facebook/rocksdb/pull/10922. However, the revert also reverted the `Options::CompactionOptionsFIFO::allow_compaction` stress/crash coverage added by the PR. It's an useful coverage cuz setting `Options::CompactionOptionsFIFO::allow_compaction=true` will [increase](https://github.com/facebook/rocksdb/blob/7.8.fb/db/version_set.cc#L3255) the compaction score of L0 files for FIFO and then trigger more FIFO compaction. This speed up discovery of bug related to FIFO compaction like https://github.com/facebook/rocksdb/pull/10955. To see the speedup, compare the failure occurrence in following commands with `Options::CompactionOptionsFIFO::allow_compaction=true/false` ``` --fifo_allow_compaction=1 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --async_io=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=8.869062094789008 --bottommost_compression_type=none --bytes_per_sync=0 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=2 --compaction_ttl=0 --compression_max_dict_buffer_bytes=8589934591 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=xpress --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=4 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=10 --index_type=2 --ingest_external_file_one_in=100 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=False --log2_keys_per_lock=10 --long_running_snapshots=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=2 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=40000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=7 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=15 --recycle_log_file_num=1 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --subcompactions=2 --sync=0 --sync_fault_injection=0 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=1 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=1 --use_direct_reads=1 --use_full_merge_v1=1 --use_merge=0 --use_multiget=0 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=65 ``` Therefore this PR is adding it back to stress/crash test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11063 Test Plan: Rehearsal stress test to make sure stress/crash test is stable Reviewed By: ajkr Differential Revision: D42283650 Pulled By: hx235 fbshipit-source-id: 132e6396ab6e24d8dcb8fe51c62dd5211cdf53ef |
|
|
Hui Xiao
|
f1574a20ff |
Revert PR 10777 "Fix FIFO causing overlapping seqnos in L0 files due to overla…" (#10999)
Summary:
**Context/Summary:**
This reverts commit
|
|
|
Peter Dillinger
|
32520df1d9 |
Remove prototype FastLRUCache (#10954)
Summary: This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954 Test Plan: tests updated Reviewed By: akankshamahajan15 Differential Revision: D41310123 Pulled By: pdillinger fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c |
|
|
anand76
|
bf497e91ad |
Allow a custom DB cleanup command to be passed to db_crashtest.py (#10883)
Summary: This option allows a custom cleanup command line for a non-Posix file system to be used by db_crashtest.py to cleanup between runs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10883 Test Plan: Run the whitebox crash test Reviewed By: pdillinger Differential Revision: D40726424 Pulled By: anand1976 fbshipit-source-id: b827f6b583ff78f9ca75ced2d96f7e58f5200432 |
|
|
Hui Xiao
|
fc74abb436 |
Fix FIFO causing overlapping seqnos in L0 files due to overlapped seqnos between ingested files and memtable's (#10777)
Summary: **Context:** Same as https://github.com/facebook/rocksdb/pull/5958#issue-511150930 but apply the fix to FIFO Compaction case Repro: ``` COERCE_CONTEXT_SWICH=1 make -j56 db_stress ./db_stress --acquire_snapshot_one_in=0 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=18 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=1 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kCRC32c --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=0 --compact_range_one_in=1000 --compaction_pri=3 --open_files=-1 --compaction_style=2 --fifo_allow_compaction=1 --compaction_ttl=0 --compression_max_dict_buffer_bytes=8388607 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=zlib --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test0/rocksdb_crashtest_whitebox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=0 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=15 --index_type=3 --ingest_external_file_one_in=100 --initial_auto_readahead_size=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --log2_keys_per_lock=10 --long_running_snapshots=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=16384 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_prefix_bloom_size_ratio=0.5 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --num_levels=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=32 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=1 --pause_background_one_in=0 --periodic_compaction_seconds=0 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=45 --recycle_log_file_num=1 --reopen=20 --ribbon_starting_level=999 --snapshot_hold_ops=1000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=3 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=1 --use_merge=0 --use_multiget=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=zstd --write_buffer_size=524288 --write_dbid_to_manifest=0 --writepercent=35 put or merge error: Corruption: force_consistency_checks(DEBUG): VersionBuilder: L0 file https://github.com/facebook/rocksdb/issues/479 with seqno 23711 29070 vs. file https://github.com/facebook/rocksdb/issues/482 with seqno 27138 29049 ``` **Summary:** FIFO only does intra-L0 compaction in the following four cases. For other cases, FIFO drops data instead of compacting on data, which is irrelevant to the overlapping seqno issue we are solving. - [FIFOCompactionPicker::PickSizeCompaction](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L155) when `total size < compaction_options_fifo.max_table_files_size` and `compaction_options_fifo.allow_compaction == true` - For this path, we simply reuse the fix in `FindIntraL0Compaction` https://github.com/facebook/rocksdb/pull/5958/files#diff-c261f77d6dd2134333c4a955c311cf4a196a08d3c2bb6ce24fd6801407877c89R56 - This path was not stress-tested at all. Therefore we covered `fifo.allow_compaction` in stress test to surface the overlapping seqno issue we are fixing here. - [FIFOCompactionPicker::PickCompactionToWarm](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L313) when `compaction_options_fifo.age_for_warm > 0` - For this path, we simply replicate the idea in https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and skip files of largest seqno greater than `earliest_mem_seqno` - This path was not stress-tested at all. However covering `age_for_warm` option worths a separate PR to deal with db stress compatibility. Therefore we manually tested this path for this PR - [FIFOCompactionPicker::CompactRange](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker_fifo.cc#L365) that ends up picking one of the above two compactions - [CompactionPicker::CompactFiles](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker.cc#L378) - Since `SanitizeCompactionInputFiles()` will be called [before](https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_picker.h#L111-L113) `CompactionPicker::CompactFiles` , we simply replicate the idea in https://github.com/facebook/rocksdb/pull/5958#issue-511150930 in `SanitizeCompactionInputFiles()`. To simplify implementation, we return `Stats::Abort()` on encountering seqno-overlapped file when doing compaction to L0 instead of skipping the file and proceed with the compaction. Some additional clean-up included in this PR: - Renamed `earliest_memtable_seqno` to `earliest_mem_seqno` for consistent naming - Added comment about `earliest_memtable_seqno` in related APIs - Made parameter `earliest_memtable_seqno` constant and required Pull Request resolved: https://github.com/facebook/rocksdb/pull/10777 Test Plan: - make check - New unit test `TEST_P(DBCompactionTestFIFOCheckConsistencyWithParam, FlushAfterIntraL0CompactionWithIngestedFile)`corresponding to the above 4 cases, which will fail accordingly without the fix - Regular CI stress run on this PR + stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761 and on FIFO compaction only Reviewed By: ajkr Differential Revision: D40090485 Pulled By: hx235 fbshipit-source-id: 52624186952ee7109117788741aeeac86b624a4f |
|
|
Levi Tamasi
|
11c0d1310e |
Do not adjust test_batches_snapshots to avoid mixing runs (#10830)
Summary: This is a small follow-up to https://github.com/facebook/rocksdb/pull/10821. The goal of that PR was to hold `test_batches_snapshots` fixed across all `db_stress` invocations; however, that patch didn't address the case when `test_batches_snapshots` is unset due to a conflicting `enable_compaction_filter` or `prefix_size` setting. This PR updates the logic so the other parameter is sanitized instead in the case of such conflicts. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10830 Reviewed By: riversand963 Differential Revision: D40444548 Pulled By: ltamasi fbshipit-source-id: 0331265704904b729262adec37139292fcbb7805 |
|
|
Jay Zhuang
|
8124bc3526 |
Enable preclude_last_level_data_seconds in stress test (#10824)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10824 Reviewed By: siying Differential Revision: D40390535 Pulled By: jay-zhuang fbshipit-source-id: 700803a1aff8a1e77c038740d87931577e79bcf6 |
|
|
Levi Tamasi
|
3cd78bce1e |
Temporarily disable mixing batched and non-batched runs (#10821)
Summary: We have recently made some stress test improvements that rely on decoding the "value base" from the values stored in the database. This logic does not currently support the case when some KVs are written by a non-batched ops run and some by a batched ops run. The patch temporarily disables mixing these two. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10821 Reviewed By: riversand963 Differential Revision: D40367326 Pulled By: ltamasi fbshipit-source-id: 66f2e0cbc097ab6b1f9e4b39b833bd466f1aaab5 |
|
|
Yanqin Jin
|
943247b76e |
Expand stress test coverage for min_write_buffer_number_to_merge (#10785)
Summary: As title. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10785 Test Plan: CI Reviewed By: ltamasi Differential Revision: D40162583 Pulled By: ltamasi fbshipit-source-id: 4e01f9b682f397130e286cf5d82190b7973fa3c1 |
|
|
Peter Dillinger
|
b205c6d029 |
Fix bug in HyperClockCache ApplyToEntries; cleanup (#10768)
Summary: We have seen some rare crash test failures in HyperClockCache, and the source could certainly be a bug fixed in this change, in ClockHandleTable::ConstApplyToEntriesRange. It wasn't properly accounting for the fact that incrementing the acquire counter could be ineffective, due to parallel updates. (When incrementing the acquire counter is ineffective, it is incorrect to then decrement it.) This change includes some other minor clean-up in HyperClockCache, and adds stats_dump_period_sec with a much lower period to the crash test. This should be the primary caller of ApplyToEntries, in collecting cache entry stats. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10768 Test Plan: haven't been able to reproduce the failure, but should be in a better state (bug fix and improved crash test) Reviewed By: anand1976 Differential Revision: D40034747 Pulled By: anand1976 fbshipit-source-id: a06fcefe146e17ee35001984445cedcf3b63eb68 |
|
|
Levi Tamasi
|
3ae00dec90 |
Disable ingestion in stress tests when PutEntity is used (#10769)
Summary: `SstFileWriter` currently does not support the `PutEntity` API, so in `TestIngestExternalFile` all key-values are written using regular `Put`s. This violates the assumption that whether or not a key corresponds to a plain old key-value or a wide-column entity can be determined by solely looking at the "value base" used when generating the value. The patch fixes this issue by disabling ingestion when `PutEntity` is enabled in the stress tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10769 Test Plan: Ran a simple blackbox stress test. Reviewed By: akankshamahajan15 Differential Revision: D40042132 Pulled By: ltamasi fbshipit-source-id: 93e75ff55545b7b69fa4ddef1d96093c961158a0 |
|
|
Changyu Bi
|
9f2363f4c4 |
User-defined timestamp support for `DeleteRange()` (#10661)
Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2 |
|
|
Hui Xiao
|
3b8164912e |
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698)
Summary:
**Context/Summary:**
Introduce `manual_wal_flush_one_in` as titled.
- When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in`
Incompatibilities fixed along the way:
```
db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed.
```
- It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false.
- As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698
Test Plan:
- Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3`
- Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs
Reviewed By: ajkr
Differential Revision: D39593752
Pulled By: ajkr
fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
|
|
|
Levi Tamasi
|
9078fcccee |
Add the PutEntity API to the stress/crash tests (#10760)
Summary: The patch adds the `PutEntity` API to the non-batched, batched, and CF consistency stress tests. Namely, when the new `db_stress` command line parameter `use_put_entity_one_in` is greater than zero, one in N writes on average is performed using `PutEntity` rather than `Put`. The wide-column entity written has the generated value in its default column; in addition, it contains up to three additional columns where the original generated value is divided up between the column name and the column value (with the column name containing the first k characters of the generated value, and the column value containing the rest). Whether `PutEntity` is used (and if so, how many columns the entity has) is completely determined by the "value base" used to generate the value (that is, there is no randomness involved). Assuming the same `use_put_entity_one_in` setting is used across `db_stress` invocations, this enables us to reconstruct and validate the entity during subsequent `db_stress` runs. Note that `PutEntity` is currently incompatible with `Merge`, transactions, and user-defined timestamps; these combinations are currently disabled/disallowed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760 Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script. Reviewed By: riversand963 Differential Revision: D39939032 Pulled By: ltamasi fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9 |
|
|
Hui Xiao
|
aa71464410 |
Remove and recreate expected values dir in white-box testing 2nd half (#10743)
Summary: **Context:** https://github.com/facebook/rocksdb/pull/10732#pullrequestreview-1121076205 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10743 Test Plan: - Locally run `python3 ./tools/db_crashtest.py whitebox --simple -max_key=1000000 -value_size_mult=33 -write_buffer_size=524288 -target_file_size_base=524288 -max_bytes_for_level_base=2097152 --duration=120 --interval=10 --ops_per_thread=1000 --random_kill_odd=887` - CI jobs testing Reviewed By: ajkr Differential Revision: D39838733 Pulled By: ajkr fbshipit-source-id: 9e819b66b0293dfc7a31a908a9d42c6baca4aeaa |
|
|
Hui Xiao
|
f3b359a549 |
Set options.num_levels in db_stress_test_base (#10732)
Summary: An add-on to https://github.com/facebook/rocksdb/pull/6818 to complete adding single-level universal compaction to stress/crash testing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10732 Test Plan: - Locally run for 10 min `python3 ./tools/db_crashtest.py whitebox --simple --compaction_style=1 --num_levels=1 -max_key=1000000 -value_size_mult=33 -write_buffer_size=524288 -target_file_size_base=524288 -max_bytes_for_level_base=2097152 --duration=120 --interval=10 --ops_per_thread=1000 --random_kill_odd=887` - Check LOG to confirm single-level universal compaction is called - Manual testing and log checking to ensure destroy_db_initially=1 is correctly set across runs with different compaction styles (i.e, in the second half of whitebox testing). - [ongoing]CI jobs stress test Reviewed By: ajkr Differential Revision: D39797612 Pulled By: ajkr fbshipit-source-id: 16f5c40c3464c57360c06c8305f92118e426149c |
|
|
Hui Xiao
|
aed30ddf21 |
Support WriteCommit policy with sync_fault_injection=1 (#10624)
Summary:
**Context:**
Prior to this PR, correctness testing with un-sync data loss [disabled](https://github.com/facebook/rocksdb/pull/10605) transaction (`use_txn=1`) thus all of the `txn_write_policy` . This PR improved that by adding support for one policy - WriteCommit (`txn_write_policy=0`).
**Summary:**
They key to this support is (a) handle Mark{Begin, End}Prepare/MarkCommit/MarkRollback in constructing ExpectedState under WriteCommit policy correctly and (b) monitor CI jobs and solve any test incompatibility issue till jobs are stable. (b) will be part of the test plan.
For (a)
- During prepare (i.e, between `MarkBeginPrepare()` and `MarkEndPrepare(xid)`), `ExpectedStateTraceRecordHandler` will buffer all writes by adding all writes to an internal `WriteBatch`.
- On `MarkEndPrepare()`, that `WriteBatch` will be associated with the transaction's `xid`.
- During the commit (i.e, on `MarkCommit(xid)`), `ExpectedStateTraceRecordHandler` will retrieve and iterate the internal `WriteBatch` and finally apply those writes to `ExpectedState`
- During the rollback (i.e, on `MarkRollback(xid)`), `ExpectedStateTraceRecordHandler` will erase the internal `WriteBatch` from the map.
For (b) - one major issue described below:
- TransactionsDB in db stress recovers prepared-but-not-committed txns from the previous crashed run by randomly committing or rolling back it at the start of the current run, see a historical [PR](
|
|
|
Bo Wang
|
dd40f83e95 |
Fix lint issues after enable BLACK (#10717)
Summary: As title Pull Request resolved: https://github.com/facebook/rocksdb/pull/10717 Test Plan: Unit Tests CI Reviewed By: riversand963 Differential Revision: D39700707 Pulled By: gitbw95 fbshipit-source-id: 54de27e695535a50159f5f6467da36aaf21bebae |
|
|
Bo Wang
|
9e01de9066 |
Enable BLACK for internal_repo_rocksdb (#10710)
Summary: Enable BLACK for internal_repo_rocksdb. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10710 Reviewed By: riversand963, zsol Differential Revision: D39666245 Pulled By: gitbw95 fbshipit-source-id: ef364318d2bbba66e96f3211dd6a975174d52c21 |
|
|
Jay Zhuang
|
00050d4634 |
Disable tiered storage + BlobDB stress test (#10699)
Summary: There're 2 knobs to disable blobdb, adding that. Also print call stack when there's assert failure. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10699 Reviewed By: gitbw95 Differential Revision: D39596448 Pulled By: jay-zhuang fbshipit-source-id: 5ce9fd0630d8b6ff1e157a2685a1e80a99997098 |
|
|
gitbw95
|
2cc5b39560 |
Add enable_split_merge option for CompressedSecondaryCache (#10690)
Summary: `enable_custom_split_merge` is added for enabling the custom split and merge feature, which split the compressed value into chunks so that they may better fit jemalloc bins. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10690 Test Plan: Unit Tests Stress Tests Reviewed By: anand1976 Differential Revision: D39567604 Pulled By: gitbw95 fbshipit-source-id: f6d1d46200f365220055f793514601dcb0edc4b7 |
|
|
Peter Dillinger
|
0f91c72adc |
Call experimental new clock cache HyperClockCache (#10684)
Summary: This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons: * We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache." * We want to highlight the key feature: it's fast (especially under parallel load) * Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements. * We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.) Some API detail: * To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`. * Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated. For performance tests see https://github.com/facebook/rocksdb/pull/10626 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684 Test Plan: no interesting functional changes; tests updated Reviewed By: anand1976 Differential Revision: D39547800 Pulled By: pdillinger fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf |
|
|
Yanqin Jin
|
088b9844d4 |
Re-enable user-defined timestamp and subcompactions (#10689)
Summary: Hopefully, we can re-enable the combination of user-defined timestamp and subcompactions after https://github.com/facebook/rocksdb/issues/10658. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10689 Test Plan: Make sure the following succeeds on devserver. make crash_test_with_ts Reviewed By: ltamasi Differential Revision: D39556558 Pulled By: riversand963 fbshipit-source-id: 4695f420b1bc9ebf3b24640b693746f4db82c149 |
|
|
Jay Zhuang
|
1cdc84114f |
Tiered Storage feature doesn't support BlobDB yet (#10681)
Summary: Disable the tiered storage + BlobDB test. Also enable different hot data setting for Tiered compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/10681 Reviewed By: ajkr Differential Revision: D39531941 Pulled By: jay-zhuang fbshipit-source-id: aa0595eb38d03f17638d300d2e4cc9061429bf61 |
|
|
Akanksha Mahajan
|
7a9ecdac3c |
Add auto prefetching parameters to db_bench and db_stress (#10632)
Summary: Same as title Pull Request resolved: https://github.com/facebook/rocksdb/pull/10632 Test Plan: make crash_test -j32 Reviewed By: anand1976 Differential Revision: D39241479 Pulled By: akankshamahajan15 fbshipit-source-id: 5db5b0c007da786bacc1b30d8926d36d6d029b87 |