mirror of
https://github.com/facebook/rocksdb.git
synced 2024-11-27 11:43:49 +00:00
395 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hui Xiao
|
abd6751aba |
Fix wrong padded bytes being used to generate file checksum (#12598)
Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/12542 introduced a bug where wrong padded bytes used to generate file checksum if flush happens during padding. This PR fixed it along with an existing same bug for `perform_data_verification_=true`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12598 Test Plan: - New UT that failed before this fix (`db->VerifyFileChecksums: ...Corruption: ...file checksum mismatch`) and passes after - Benchmark ``` TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillseq[-X300] --num=100000 --block_align=1 --compression_type=none ``` Pre-PR: fillseq [AVG 300 runs] : 421334 (± 4126) ops/sec; 46.6 (± 0.5) MB/sec Post-PR: (no regression observed but a slight improvement) fillseq [AVG 300 runs] : 425768 (± 4309) ops/sec; 47.1 (± 0.5) MB/sec Reviewed By: ajkr, anand1976 Differential Revision: D56725688 Pulled By: hx235 fbshipit-source-id: c1a700a95def8c65c0a21e44f8c1966164925ad5 |
||
|
Andrew Kryczka
|
2ec25a3e54 |
Prevent data block compression with BlockBasedTableOptions::block_align (#12592)
Summary: Made `BlockBasedTableOptions::block_align` incompatible (i.e., APIs will return `Status::InvalidArgument`) with more ways of enabling compression: `CompactionOptions::compression`, `ColumnFamilyOptions::compression_per_level`, and `ColumnFamilyOptions::bottommost_compression`. Previously it was only incompatible with `ColumnFamilyOptions::compression`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12592 Reviewed By: hx235 Differential Revision: D56650862 Pulled By: ajkr fbshipit-source-id: f5201602c2ce436e6d8d30893caa6a161a61f141 |
||
|
Hui Xiao
|
7d83b4e3e5 |
Fix file checksum mismatch due to padded bytes when block_align=true (#12542)
Summary:
**Context/Summary:**
When `BlockBasedTableOptions::block_align=true`, we pad bytes to align blocks
|
||
|
Peter Dillinger
|
b515a5db3f |
Replace ScopedArenaIterator with ScopedArenaPtr<InternalIterator> (#12470)
Summary: ScopedArenaIterator is not an iterator. It is a pointer wrapper. And we don't need a custom implemented pointer wrapper when std::unique_ptr can be instantiated with what we want. So this adds ScopedArenaPtr<T> to replace those uses. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12470 Test Plan: CI (including ASAN/UBSAN) Reviewed By: jowlyzhang Differential Revision: D55254362 Pulled By: pdillinger fbshipit-source-id: cc96a0b9840df99aa807f417725e120802c0ae18 |
||
|
Yu Zhang
|
f2546b6623 |
Support returning write unix time in iterator property (#12428)
Summary: This PR adds support to return data's approximate unix write time in the iterator property API. The general implementation is: 1) If the entry comes from a SST file, the sequence number to time mapping recorded in that file's table properties will be used to deduce the entry's write time from its sequence number. If no such recording is available, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown except if the entry's sequence number is zero, in which case, 0 is returned. This also means that even if `preclude_last_level_data_seconds` and `preserve_internal_time_seconds` can be toggled off between DB reopens, as long as the SST file's table property has the mapping available, the entry's write time can be deduced and returned. 2) If the entry comes from memtable, we will use the DB's sequence number to write time mapping to do similar things. A copy of the DB's seqno to write time mapping is kept in SuperVersion to allow iterators to have lock free access. This also means a new `SuperVersion` is installed each time DB's seqno to time mapping updates, which is originally proposed by Peter in https://github.com/facebook/rocksdb/issues/11928 . Similarly, if the feature is not enabled, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown. Needed follow up: 1) The write time for `kTypeValuePreferredSeqno` should be special cased, where it's already specified by the user, so we can directly return it. 2) Flush job can be updated to use DB's seqno to time mapping copy in the SuperVersion. 3) Handle the case when `TimedPut` is called with a write time that is `std::numeric_limits<uint64_t>::max()`. We can make it a regular `Put`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12428 Test Plan: Added unit test Reviewed By: pdillinger Differential Revision: D54967067 Pulled By: jowlyzhang fbshipit-source-id: c795b1b7ec142e09e53f2ed3461cf719833cb37a |
||
|
Peter Dillinger
|
bfd00bba9c |
Use format_version=6 by default (#12352)
Summary: It's in production for a large storage service, and it was initially released 6 months ago (8.6.0). IMHO that's enough room for "easy downgrade" to most any user's previously integrated version, even if they only update a few times a year. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12352 Test Plan: tests updated, including format capatibility test table_test: ApproximateOffsetOfCompressed is affected because adding index block to metaindex adds about 13 bytes to SST files in format_version 6. This test has historically been problematic and one reason is that, apparently, not only could it pass/fail depending on snappy compression version, but also how long your host name is, because of db_host_id. I've cleared that out for the test, which takes care of format_version=6 and hopefully improves long-term reliability. Suggested follow-up: FinishImpl in table_test.cc takes a table_options that is ignored in some cases and might not match the ioptions.table_factory configuration unless the caller is very careful. This should be cleaned up somehow. Reviewed By: anand1976 Differential Revision: D53786884 Pulled By: pdillinger fbshipit-source-id: 1964cbd40d3ab0a821fdc01c458031df716fcf51 |
||
|
Peter Dillinger
|
54cb9c77d9 |
Prefer static_cast in place of most reinterpret_cast (#12308)
Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2 |
||
|
Peter Dillinger
|
1d6dbfb8b7 |
Rename IntTblPropCollector -> InternalTblPropColl (#12320)
Summary: I've always found this name difficult to read, because it sounds like it's for collecting int(eger) table properties. I'm fixing this now to set up for a change that I have stubbed out in the public API (table_properties.h): a new adapter function `TablePropertiesCollector::AsInternal()` that allows RocksDB-provided TablePropertiesCollectors (such as CompactOnDeletionCollector) to implement the easier-to-upgrade internal interface while still (superficially) implementing the public interface. In addition to added flexibility, this should be a performance improvement as the adapter class UserKeyTablePropertiesCollector can be avoided for such cases where a RocksDB-provided collector is used (AsInternal() returns non-nullptr). table_properties.h is the only file with changes that aren't simple find-replace renaming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12320 Test Plan: existing tests, CI Reviewed By: ajkr Differential Revision: D53336945 Pulled By: pdillinger fbshipit-source-id: 02535bcb30bbfb00e29e8478af62e5dad50a63b8 |
||
|
Peter Dillinger
|
4e60663b31 |
Remove unnecessary, confusing 'extern' (#12300)
Summary: In C++, `extern` is redundant in a number of cases: * "Global" function declarations and definitions * "Global" variable definitions when already declared `extern` For consistency and simplicity, I've removed these in code that *we own*. In a couple of cases, I removed obsolete declarations, and for MagicNumber constants, I have consolidated the declarations into a header file (format.h) as standard best practice would prescribe. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12300 Test Plan: no functional changes, CI Reviewed By: ajkr Differential Revision: D53148629 Pulled By: pdillinger fbshipit-source-id: fb8d927959892e03af09b0c0d542b0a3b38fd886 |
||
|
akankshamahajan
|
5cb2d09d47 |
Refactor FilePrefetchBuffer code (#12097)
Summary: Summary - Refactor FilePrefetchBuffer code - Implementation: FilePrefetchBuffer maintains a deque of free buffers (free_bufs_) of size num_buffers_ and buffers (bufs_) which contains the prefetched data. Whenever a buffer is consumed or is outdated (w.r.t. to requested offset), that buffer is cleared and returned to free_bufs_. If a buffer is available in free_bufs_, it's moved to bufs_ and is sent for prefetching. num_buffers_ defines how many buffers are maintained that contains prefetched data. If num_buffers_ == 1, it's a sequential read flow. Read API will be called on that one buffer whenever the data is requested and is not in the buffer. If num_buffers_ > 1, then the data is prefetched asynchronosuly in the buffers whenever the data is consumed from the buffers and that buffer is freed. If num_buffers > 1, then requested data can be overlapping between 2 buffers. To return the continuous buffer overlap_bufs_ is used. The requested data is copied from 2 buffers to the overlap_bufs_ and overlap_bufs_ is returned to the caller. - Merged Sync and Async code flow into one in FilePrefetchBuffer. Test Plan - - Crash test passed - Unit tests - Pending - Benchmarks Pull Request resolved: https://github.com/facebook/rocksdb/pull/12097 Reviewed By: ajkr Differential Revision: D51759552 Pulled By: akankshamahajan15 fbshipit-source-id: 69a352945affac2ed22be96048d55863e0168ad5 |
||
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
||
|
akankshamahajan
|
e7c6259447 |
Make auto_readahead_size default true (#12080)
Summary: Make auto_readahead_size option default true Pull Request resolved: https://github.com/facebook/rocksdb/pull/12080 Test Plan: benchmarks and exisiting tests Reviewed By: anand1976 Differential Revision: D52152132 Pulled By: akankshamahajan15 fbshipit-source-id: f1515563564e77df457dff2e865e4ede8c3ddf44 |
||
|
akankshamahajan
|
c77b50a4fd |
Add AsyncIO support for tuning readahead_size by block cache lookup (#11936)
Summary:
Add support for tuning of readahead_size by block cache lookup for async_io.
**Design/ Implementation** -
**BlockBasedTableIterator.cc** -
`BlockCacheLookupForReadAheadSize` callback API lookups in the block cache and tries to reduce the start
and end offset passed. This function looks into the block cache for the blocks between `start_offset`
and `end_offset` and add all the handles in the queue.
It then iterates from the end in the handles to find first miss block and update the end offset to that block.
It also iterates from the start and find first miss block and update the start offset to that block.
```
_read_curr_block_ argument : True if this call was due to miss in the cache and caller wants to read that block
synchronously.
False if current call is to prefetch additional data in extra buffers
(due to ReadAsync call in FilePrefetchBuffer)
```
In case there is no data to be read in that callback (because of upper_bound or all blocks are in cache),
it updates start and end offset to be equal and that `FilePrefetchBuffer` interprets that as 0 length to be read.
**FilePrefetchBuffer.cc** -
FilePrefetchBuffer calls the callback - `ReadAheadSizeTuning` and pass the start and end offset to that
callback to get updated start and end offset to read based on cache hits/misses.
1. In case of Read calls (when offset passed to FilePrefetchBuffer is on cache miss and that data needs to be read), _read_curr_block_ is passed true.
2. In case of ReadAsync calls, when buffer is all consumed and can go for additional prefetching, the start offset passed is the initial end offset of prev buffer (without any updated offset based on cache hit/miss).
Foreg. if following are the data blocks with cache hit/miss and start offset
and Read API found miss on DB1 and based on readahead_size (50) it passes end offset to be 50.
[DB1 - miss- 0 ] [DB2 - hit -10] [DB3 - miss -20] [DB4 - miss-30] [DB5 - hit-40]
[DB6 - hit-50] [DB7 - miss-60] [DB8 - miss - 70] [DB9 - hit - 80] [DB6 - hit 90]
- For Read call - updated start offset remains 0 but end offset updates to DB4, as DB5 is in cache.
- Read calls saves initial end offset 50 as that was meant to be prefetched.
- Now for next ReadAsync call - the start offset will be 50 (previous buffer initial end offset) and based on readahead_size, end offset will be 100
- On callback, because of cache hits - callback will update the start offset to 60 and end offset to 80 to read only 2 data blocks (DB7 and DB8).
- And for that ReadAsync call - initial end offset will be set to 100 which will again used by next ReadAsync call as start offset.
- `initial_end_offset_` in `BufferInfo` is used to save the initial end offset of that buffer.
- If let's say DB5 and DB6 overlaps in 2 buffers (because of alignment), `prev_buf_end_offset` is passed to make sure already prefetched data is not prefetched again in second buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11936
Test Plan:
- Ran crash_test several times.
- New unit tests added.
Reviewed By: anand1976
Differential Revision: D50906217
Pulled By: akankshamahajan15
fbshipit-source-id: 0d75d3c98274e98aa34901b201b8fb05232139cf
|
||
|
Andrew Kryczka
|
06dc32ef25 |
internal_repo_rocksdb (435146444452818992) (#12115)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12115 Reviewed By: jowlyzhang Differential Revision: D51745742 Pulled By: ajkr fbshipit-source-id: 67000d07783b413924798dd9c1751da27e119d53 |
||
|
Hui Xiao
|
9a034801ce |
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444)
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version:
|
||
|
Peter Dillinger
|
7a1b0207e6 |
format_version=6 and context-aware block checksums (#9058)
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
|
||
|
Peter Dillinger
|
206fdea3d9 |
Change internal headers with duplicate names (#11408)
Summary: In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement. No public API changes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408 Test Plan: existing tests Reviewed By: ltamasi Differential Revision: D45456696 Pulled By: pdillinger fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373 |
||
|
Changyu Bi
|
62fc15f009 |
Block per key-value checksum (#11287)
Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940 |
||
|
Peter Dillinger
|
a2c1f57358 |
Fix compression tests^2 (#11403)
Summary: This time a particular version of bzip2 is under-compressing vs. expectation in BlockBasedTableTest.CompressionRatioThreshold. We'll exempt that algorithm like I did for DBStatisticsTest.CompressionStatsTest. https://app.circleci.com/pipelines/github/facebook/rocksdb/26869/workflows/a46246db-73c7-4946-af82-10a78a7df6af/jobs/596124 Pull Request resolved: https://github.com/facebook/rocksdb/pull/11403 Test Plan: CI Reviewed By: ltamasi Differential Revision: D45233441 Pulled By: pdillinger fbshipit-source-id: 506c8dfe5e0397c78193359df6288397bf0667c9 |
||
|
Peter Dillinger
|
fb63d9b4ee |
Fix compression tests when snappy not available (#11396)
Summary: Tweak some bounds and things, and reduce risk of surprise results by running on all supported compressions (mostly). Also improves the precise compressibility of CompressibleString by using RandomBinaryString. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11396 Test Plan: updated tests Reviewed By: ltamasi Differential Revision: D45211938 Pulled By: pdillinger fbshipit-source-id: 9dc1dd8574a60a9364efe18558be66d31a35598b |
||
|
Peter Dillinger
|
d79be3dca2 |
Changes and enhancements to compression stats, thresholds (#11388)
Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803 |
||
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
||
|
Peter Dillinger
|
9b698cda51 |
Update GeneralTableTest::ApproximateOffsetOfCompressed values (#11384)
Summary: Because of this failure with snappy 1.1.8, ROCKSDB_NO_FBCODE=1 ``` Value 3531 is not in range [2000, 3525] table/table_test.cc:4231: Failure ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11384 Test Plan: run updated test in failing configuration Reviewed By: ajkr Differential Revision: D45057161 Pulled By: pdillinger fbshipit-source-id: 397054f08033315e2e2bd9410f1fa32ddbf3b9c8 |
||
|
Peter Dillinger
|
f9db0c6e9c |
Refactor block cache tracing w/improved MultiGet (#11339)
Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d |
||
|
Peter Dillinger
|
e01073252b |
Tests verifying non-zero checksums of zero bytes (#11260)
Summary: Adds unit tests verifying that a block payload and checksum of all zeros is not falsely considered valid data. The test exhaustively checks that for blocks up to some length (default 20K, more exhaustively 10M) of all zeros do not produce a block checksum of all zeros. Also small refactoring of an existing checksum test to use parameterized test. (Suggest hiding whitespace changes for review.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11260 Test Plan: this is the test, manual run with `ROCKSDB_THOROUGH_CHECKSUM_TEST=1` to verify up to 10M. Reviewed By: hx235 Differential Revision: D43706192 Pulled By: pdillinger fbshipit-source-id: 95e721c320ca928e7fa2400c2570fb359cc30b1f |
||
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
||
|
Peter Dillinger
|
433d7e4594 |
Improve error messages for SST footer and size errors (#11009)
Summary: Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure: * Magic number error is reported first if we attempt to open an SST file and the footer is completely bad. * Footer errors are reported with affected file. * If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009 Test Plan: unit tests added, some manual Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed). Reviewed By: siying Differential Revision: D41656272 Pulled By: pdillinger fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df |
||
|
anand76
|
727bad78b8 |
Format files under table/ by clang-format (#10852)
Summary: Run clang-format on files under the `table` directory. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10852 Reviewed By: ajkr Differential Revision: D40650732 Pulled By: anand1976 fbshipit-source-id: 2023a958e37fd6274040c5181130284600c9e0ef |
||
|
Peter Dillinger
|
27c9705ac4 |
Use kXXH3 as default checksum (CPU efficiency) (#10778)
Summary:
Since this has been supported for about a year, I think it's time to make it the default. This should improve CPU efficiency slightly on most hardware.
A current DB performance comparison using buck+clang build:
```
TEST_TMPDIR=/dev/shm ./db_bench -checksum_type={1,4} -benchmarks=fillseq[-X1000] -num=3000000 -disable_wal
```
kXXH3 (+0.2% DB write throughput):
`fillseq [AVG 1000 runs] : 822149 (± 1004) ops/sec; 91.0 (± 0.1) MB/sec`
kCRC32c:
`fillseq [AVG 1000 runs] : 820484 (± 1203) ops/sec; 90.8 (± 0.1) MB/sec`
Micro benchmark comparison:
```
./db_bench --benchmarks=xxh3[-X20],crc32c[-X20]
```
Machine 1, buck+clang build:
`xxh3 [AVG 20 runs] : 3358616 (± 19091) ops/sec; 13119.6 (± 74.6) MB/sec`
`crc32c [AVG 20 runs] : 2578725 (± 7742) ops/sec; 10073.1 (± 30.2) MB/sec`
Machine 2, make+gcc build, DEBUG_LEVEL=0 PORTABLE=0:
`xxh3 [AVG 20 runs] : 6182084 (± 137223) ops/sec; 24148.8 (± 536.0) MB/sec`
`crc32c [AVG 20 runs] : 5032465 (± 42454) ops/sec; 19658.1 (± 165.8) MB/sec`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10778
Test Plan: make check, unit tests updated
Reviewed By: ajkr
Differential Revision: D40112510
Pulled By: pdillinger
fbshipit-source-id: e59a8d50a60346137732f8668ba7cfac93be2b37
|
||
|
akankshamahajan
|
0e7b27bfcf |
Refactor block cache tracing APIs (#10811)
Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282 |
||
|
Peter Dillinger
|
6de7081cf3 |
Always verify SST unique IDs on SST file open (#10532)
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2 |
||
|
Levi Tamasi
|
81388b36e0 |
Add support for wide-column point lookups (#10540)
Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b |
||
|
Changyu Bi
|
9d77bf8f7b |
Fragment memtable range tombstone in the write path (#10380)
Summary: - Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact. - db_bench is updated to print out the number of range deletions executed if there is any. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380 Test Plan: - CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed. - Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable. ``` single thread: ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100 multi_thread ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100 ``` Commit |
||
|
sdong
|
252bea405e |
Improve SubCompaction Partitioning (#10393)
Summary: Unit tests still haven't been fixed. Also need to add more tests. But I ran some simple fillrandom db_bench and the partitioning feels reasonable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10393 Test Plan: 1. Make sure existing tests pass. This should cover some basic sub compaction logic to be correct and the partitioning result is reasonable; 2. Add a new unit test to ApproximateKeyAnchors() 3. Run some db_bench with max_subcompaction = 4 and watch the compaction is indeed partitioned evenly. Reviewed By: jay-zhuang Differential Revision: D38043783 fbshipit-source-id: 085008e0f85f9b7c5abff7800307618320efb19f |
||
|
Bo Wang
|
c073ed7601 |
Fix typo in comments and code (#10233)
Summary: Fix typo in comments and code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10233 Test Plan: Existing unit tests should pass. Reviewed By: jay-zhuang, anand1976 Differential Revision: D37356702 Pulled By: gitbw95 fbshipit-source-id: 32c019adcc6dcc95a9882b38147a310091368e51 |
||
|
Peter Dillinger
|
126c223714 |
Remove deprecated block-based filter (#10184)
Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80 |
||
|
Jay Zhuang
|
a96a4a2f7b |
Fix ApproximateOffsetOfCompressed test (#10048)
Summary: https://github.com/facebook/rocksdb/issues/9857 introduced new an option `use_zstd_dict_trainer`, which is stored in SST as text, e.g.: ``` ... zstd_max_train_bytes=0; enabled=0;... ``` it increased the sst size a little bit and cause `ApproximateOffsetOfCompressed` test to fail: ``` Value 7053 is not in range [4000, 7050] table/table_test.cc:4019: Failure Value of: Between(c.ApproximateOffsetOf("xyz"), 4000, 7050) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10048 Test Plan: verified the test pass after the change Reviewed By: cbi42 Differential Revision: D36643688 Pulled By: jay-zhuang fbshipit-source-id: bf12d211f6ae71937259ef21b1226bd06e8da717 |
||
|
Peter Dillinger
|
0070680cfd |
Adjust public APIs to prefer 128-bit SST unique ID (#10009)
Summary: 128 bits should suffice almost always and for tracking in manifest. Note that this changes the output of sst_dump --show_properties to only show 128 bits. Also introduces InternalUniqueIdToHumanString for presenting internal IDs for debugging purposes. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10009 Test Plan: unit tests updated Reviewed By: jay-zhuang Differential Revision: D36458189 Pulled By: pdillinger fbshipit-source-id: 93ebc4a3b6f9c73ee154383a1f8b291a5d6bbef5 |
||
|
Hui Xiao
|
3573558ec5 |
Rewrite memory-charging feature's option API (#9926)
Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af |
||
|
sdong
|
736a7b5433 |
Remove own ToString() (#9955)
Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471 |
||
|
sdong
|
33742c2a9f |
Remove BlockBasedTableOptions.hash_index_allow_collision (#9454)
Summary: BlockBasedTableOptions.hash_index_allow_collision is already deprecated and has no effect. Delete it for preparing 7.0 release. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9454 Test Plan: Run all existing tests. Reviewed By: ajkr Differential Revision: D33805827 fbshipit-source-id: ed8a436d1d083173ec6aef2a762ba02e1eefdc9d |
||
|
mrambacher
|
30b08878d8 |
Make FilterPolicy Customizable (#9590)
Summary: Make FilterPolicy into a Customizable class. Allow new FilterPolicy to be discovered through the ObjectRegistry Pull Request resolved: https://github.com/facebook/rocksdb/pull/9590 Reviewed By: pdillinger Differential Revision: D34327367 Pulled By: mrambacher fbshipit-source-id: 37e7edac90ec9457422b72f359ab8ef48829c190 |
||
|
Andrew Kryczka
|
babe56ddba |
Add rate limiter priority to ReadOptions (#9424)
Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c |
||
|
Peter Dillinger
|
479eb1aad6 |
Hide deprecated, inefficient block-based filter from public API (#9535)
Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738 |
||
|
Peter Dillinger
|
fc9d4071f0 |
Fast path for detecting unchanged prefix_extractor (#9407)
Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76 |
||
|
mrambacher
|
9a116ab4b4 |
Add NewMetaDataIterator method (#8692)
Summary: Fixes a problem where the iterator for metadata was being treated as a non-user key when in fact it was a user key. This led to a problem where the property keys could not be searched for correctly. The main exposure of this problem was that the HashIndexReader could not get the "prefixes" property correctly, resulting in the failure of retrieval/creation of the BlockPrefixIndex. Added BlockBasedTableTest.SeekMetaBlocks test to validate this condition. Fixing this condition exposed two other tests (SeekWithPrefixLongerThanKey, MultiGetPrefixFilter) that passed incorrectly previously and now failed. Updated those two tests to pass. Not sure if the tests are functionally correct/still appropriate, but made them pass... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8692 Reviewed By: riversand963 Differential Revision: D33119539 Pulled By: mrambacher fbshipit-source-id: 658969fe9265f73dc184dab97cc3f4eaed2d881a |
||
|
mrambacher
|
423538a816 |
Make MemoryAllocator into a Customizable class (#8980)
Summary: - Make MemoryAllocator and its implementations into a Customizable class. - Added a "DefaultMemoryAllocator" which uses new and delete - Added a "CountedMemoryAllocator" that counts the number of allocs and free - Updated the existing tests to use these new allocators - Changed the memkind allocator test into a generic test that can test the various allocators. - Added tests for creating all of the allocators - Added tests to verify/create the JemallocNodumpAllocator using its options. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980 Reviewed By: zhichao-cao Differential Revision: D32990403 Pulled By: mrambacher fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76 |
||
|
Peter Dillinger
|
0050a73a4f |
New stable, fixed-length cache keys (#9126)
Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f |
||
|
Peter Dillinger
|
e92a0ed040 |
Optimize & clean up footer code (#9280)
Summary: Again, ahead of planned changes in https://github.com/facebook/rocksdb/issues/9058. This change improves performance (vs. pre-https://github.com/facebook/rocksdb/issues/9240 baseline) by separating a FooterBuilder from Footer, where FooterBuilder includes (inline owns) the serialized data so that it can be stack allocated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9280 Test Plan: existing tests + performance testing below Extreme case performance testing as in https://github.com/facebook/rocksdb/issues/9240 with TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Pre-https://github.com/facebook/rocksdb/issues/9240 baseline ( |
||
|
Peter Dillinger
|
653c392e47 |
More refactoring ahead of footer & meta changes (#9240)
Summary: I'm working on a new format_version=6 to support context checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test updates to support that change. Test coverage data and manual inspection agree on dead code in block_based_table_reader.cc (removed). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240 Test Plan: tests enhanced to cover more cases etc. Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible. TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true} (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Before w/ wal: 454512 After w/ wal: 444820 (-2.1%) Before w/o wal: 1004560 After w/o wal: 998897 (-0.6%) Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case. This regression will be corrected in a follow-up PR. Reviewed By: ajkr Differential Revision: D32813769 Pulled By: pdillinger fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f |