Summary:
RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB.
This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block.
1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB.
2. It maintains readahead_size for L1 - Ln levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056
Test Plan:
Added new unit tests
Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled.
Reviewed By: anand1976
Differential Revision: D31773640
Pulled By: akankshamahajan15
fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
For multiple versions (ts + seq) of the same user key, if they cross the boundary of `full_history_ts_low_`,
we should retain the version that is visible to the `full_history_ts_low_`. Namely, we keep the internal key
with the largest timestamp smaller than `full_history_ts_low`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9116
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32261514
Pulled By: riversand963
fbshipit-source-id: e10f47c254c04c05261440051e4f50cb7d95474e
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
…action
```
db/db_with_timestamp_basic_test.cc:2643: Failure
db_->CompactFiles(compact_opt, handles_[cf], collector->GetFlushedFiles(), static_cast<int>(kNumTimestamps - i))
Invalid argument: A compaction must contain at least one file.
```
Able to be reproduced by run multiple test in parallel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9136
Test Plan:
```
gtest-parallel ./db_with_timestamp_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampCompressionSettings.PutAndGetWithCompaction/12 -r 100 -w 100
```
Reviewed By: riversand963
Differential Revision: D32197734
Pulled By: jay-zhuang
fbshipit-source-id: aeb0d6e9b37312f577e203ca81bb7a0f14d4e7ce
Summary:
The patch refactors and unifies the logic in `VersionBuilder::SaveBlobFilesTo`
and `VersionBuilder::GetMinOldestBlobFileNumber` by introducing a generic
helper that can "merge" the list of `BlobFileMetaData` in the base version with
the list of `MutableBlobFileMetaData` representing the updated state after
applying a sequence of `VersionEdit`s. This serves as groundwork for subsequent
changes that will enable us to determine whether a blob file is live after applying
a sequence of edits without calling `VersionBuilder::SaveTo`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9122
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D32151472
Pulled By: ltamasi
fbshipit-source-id: 11622b475866de823334b8bc21b0e99d913af97e
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9105
The user contract of SingleDelete is that: a SingleDelete can only be issued to
a key that exists and has NOT been updated. For example, application can insert
one key `key`, and uses a SingleDelete to delete it in the future. The `key`
cannot be updated or removed using Delete.
In reality, especially when write-prepared transaction is being used, things
can get tricky. For example, a prepared transaction already writes `key` to the
memtable after a successful Prepare(). Afterwards, should the transaction
rollback, it will insert a Delete into the memtable to cancel out the prior
Put. Consider the following sequence of operations.
```
// operation sequence 1
Begin txn
Put(key)
Prepare()
Flush()
Rollback txn
Flush()
```
There will be two SSTs resulting from above. One of the contains a PUT, while
the second one contains a Delete. It is also known that releasing a snapshot
can lead to an L0 containing only a SD for a particular key. Consider the
following operations following the above block.
```
// operation sequence 2
db->Put(key)
db->SingleDelete(key)
Flush()
```
The operation sequence 2 can result in an L0 with only the SD.
Should there be a snapshot for conflict checking created before operation
sequence 1, then an attempt to compact the db may hit the assertion failure
below, because ikey_.type is Delete (from a rollback).
```
else if (clear_and_output_next_key_) {
assert(ikey_.type == kTypeValue || ikey_.type == kTypeBlobIndex);
}
```
To fix the assertion failure, we can skip the SingleDelete if we detect an
earlier Delete in the same snapshot interval.
Reviewed By: ltamasi
Differential Revision: D32056848
fbshipit-source-id: 23620a91e28562d91c45cf7e95f414b54b729748
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9060
RocksDB bottommost level compaction may zero out an internal key's sequence if
the key's sequence is in the earliest_snapshot.
In write-prepared transaction, checking the visibility of a certain sequence in
a specific released snapshot may return a "snapshot released" result.
Therefore, it is possible, after a certain sequence of events, a PUT has its
sequence zeroed out, but a subsequent SingleDelete of the same key will still
be output with its original sequence. This violates the ascending order of
keys and leads to incorrect result.
The solution is to use an extra variable `last_key_seq_zeroed_` to track the
information about visibility in earliest snapshot. With this variable, we can
know for sure that a SingleDelete is in the earliest snapshot even if the said
snapshot is released during compaction before processing the SD.
Reviewed By: ltamasi
Differential Revision: D31813016
fbshipit-source-id: d8cff59d6f34e0bdf282614034aaea99be9174e1
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
The patch refactors the parts of `VersionBuilder` that deal with SST file
comparisons. Specifically, it makes the following changes:
* Turns `NewestFirstBySeqNo` and `BySmallestKey` from free-standing
functions into function objects. Note: `BySmallestKey` has a pointer to the
`InternalKeyComparator`, while `NewestFirstBySeqNo` is completely
stateless.
* Eliminates the wrapper `FileComparator`, which was essentially an
unnecessary DIY virtual function call mechanism.
* Refactors `CheckConsistencyDetails` and `SaveSSTFilesTo` using helper
function templates that take comparator/checker function objects. Using
static polymorphism eliminates the need to make runtime decisions about
which comparator to use.
* Extends some error messages returned by the consistency checks and
makes them more uniform.
* Removes some incomplete/redundant consistency checks from `VersionBuilder`
and `FilePicker`.
* Improves const correctness in several places.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9099
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D32027503
Pulled By: ltamasi
fbshipit-source-id: 621326ae41f4f55f7ad6a91abbd6e666d5c7857c
Summary:
EventListener::OnTableFileCreated was previously called with OK
status and file_size==0 in cases of no SST file contents written
(because there was no content to add) and the empty file deleted before
calling the listener. This could lead to a stress test assertion failure
added in https://github.com/facebook/rocksdb/issues/9054.
This changes the status to Aborted, to align with the API doc:
"... if the file is successfully created. Now it will also be called on
failure case. User can check info.status to see if it succeeded or not."
For internal purposes, this case is considered "success" but for
listener purposes, no SST file is (successfully) created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9118
Test Plan: test case added + existing db_stress
Reviewed By: ajkr, riversand963
Differential Revision: D32120232
Pulled By: pdillinger
fbshipit-source-id: a804e2e0a52598018d3b182da97804d402ffcdfa
Summary:
TSAN reported data race on count variables in MemPurgeBasic
test. This suggests the test could fail if mempurges were slow enough
that they don't complete before the count variables being checked, but
injecting a long sleep into MemPurge (outside DB mutex) confirms that
blocked writes ensure enough mempurges/flushes happen to make the test
pass. All the possible different values on testing should be OK to make
the test pass.
So this change makes the variables atomic so that up-to-date value is
always read and TSAN report suppressed. I have also used `.exchange(0)`
to make the checking less stateful by "popping off" all the accumulated
counts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9115
Test Plan: updated test, watch for any flakiness
Reviewed By: riversand963
Differential Revision: D32114432
Pulled By: pdillinger
fbshipit-source-id: c985609d39896a0d8f69ebc87b221e688609bdd8
Summary:
Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles.
When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed.
In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749
Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end.
Reviewed By: jay-zhuang
Differential Revision: D30735261
fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
Summary:
currently histogram `NUM_FILES_IN_SINGLE_COMPACTION` just counted files in first level of compaction input, this fix counts files in all levels of compaction input.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9026
Reviewed By: ajkr
Differential Revision: D31668241
Pulled By: jay-zhuang
fbshipit-source-id: c02f6c4a5df9fbf0b7510036594811152e8738af
Summary:
The number or total size of garbage blobs in any given blob file can
never exceed the number or total size of all blobs in the file. (This
would be a similar error to e.g. attempting to remove from the LSM tree
an SST file that has already been removed.) The patch builds on
https://github.com/facebook/rocksdb/issues/9085 and adds a
consistency check to `VersionBuilder` that prevents the above from
happening.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9100
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D32048982
Pulled By: ltamasi
fbshipit-source-id: 6f7e0793bf534ad04c3359cc0f696b8e4e5ef81c
Summary:
This PR fix wrong ticker `WRITE_WITH_WAL`.
`RecordTick(WRITE_WITH_WAL)` will be called later in `WriteToWAL` and `ConcurrentWriteToWAL`.
Fixes:
1. Delete these two extra `RecordTick(WRITE_WITH_WAL)`
2. Fix corresponding test case
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9064
Reviewed By: ajkr
Differential Revision: D31944459
Pulled By: riversand963
fbshipit-source-id: f1aa8d2a4320456bc357bc5b0902032f7dcad086
Summary:
sum `w_amp` will be a very large number`(bytes_written + bytes_written_blob)` when there is no any flush and ingest.
This PR set sum `w_amp` to zero if there is no any flush and ingest, this is conform to per-level `w_amp` computation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9065
Reviewed By: ajkr
Differential Revision: D31943994
Pulled By: riversand963
fbshipit-source-id: acbef5e331debebfad09e0e0d8d0885ebbc00609
Summary:
EventListenerTest.MultiCF uses TestFlushListener which has members
flushed_dbs_ and flushed_column_family_names_ that are not protected by
locks. This implicitly indicates that we need to ensure the methods
accessing these data structures in a single threaded way. In other
tests, e.g. MultiDBMultiListeners, we use TEST_WaitForFlushMemtable() to
wait until all memtables of a given column family are flushed, hence no
pending flush threads will concurrently call OnFlushCompleted() and
cause data race for flushed_dbs_. To fix a test failure, we should do
the same for MultiCF.
Example data race stack traces reported by TSAN
```
Read of size 8 at 0x7b6000002840 by main thread:
#0 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::size() const /usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/stl_vector.h:655:40
https://github.com/facebook/rocksdb/issues/1 rocksdb::EventListenerTest_MultiCF_Test::TestBody() /home/circleci/project/db/listener_test.cc:380:7
Previous write of size 8 at 0x7b6000002840 by thread T2:
#0 void std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::_M_emplace_back_aux<rocksdb::DB* const&>(rocksdb::DB* const&) /usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/vector.tcc:442:26
https://github.com/facebook/rocksdb/issues/1 std::vector<rocksdb::DB*, std::allocator<rocksdb::DB*> >::push_back(rocksdb::DB* const&) /usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/stl_vector.h:923:4
https://github.com/facebook/rocksdb/issues/2 rocksdb::TestFlushListener::OnFlushCompleted(rocksdb::DB*, rocksdb::FlushJobInfo const&) /home/circleci/project/db/listener_test.cc:255:18
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9084
Test Plan: ./listener_test --gtest_filter=EventListenerTest.MultiCF
Reviewed By: jay-zhuang
Differential Revision: D31952259
Pulled By: riversand963
fbshipit-source-id: 94a7f29e4e9466ead42418944eb2247fc32bd499
Summary:
DBFlushTest.FireOnFlushCompletedAfterCommittedResult uses test sync
points to coordinate interleaving of different threads. Before this PR,
the test writes some data to memtable, triggers a manual flush, and
triggers a second manual flush after a first bg flush thread starts
executing. Though unlikely, it is possible for the second bg flush
thread to run faster than the first bg flush thread and deques flush
queue first. In this case, the original test will fail.
The fix is to wait until the first bg flush thread deques the flush
queue before triggering second manual flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9083
Test Plan: ./db_flush_test --gtest_filter=DBFlushTest.FireOnFlushCompletedAfterCommittedResult
Reviewed By: jay-zhuang
Differential Revision: D31951239
Pulled By: riversand963
fbshipit-source-id: f32d7cdabe6ad6808fd18e54e663936dc0a9edb4
Summary:
The current VersionBuilder code on mainline keeps track of blob file related
changes ("delta") induced by a series of `VersionEdit`s in the form of
`BlobFileMetaDataDelta` objects. Specifically, `BlobFileMetaDataDelta`
contains the amount of additional garbage generated by compactions, as well
as the set of newly linked/unlinked SSTs. This is very handy for detecting trivial moves,
since in that case the newly linked and unlinked SSTs cancel each other out.
However, this representation does not allow us to easily tell whether a certain
blob file is obsolete after applying a set of `VersionEdit`s or not. In order to
solve this issue, the patch introduces `MutableBlobFileMetaData`, which, in addition
to the delta, also contains the materialized state after applying a set of version edits
(i.e. the total amount of garbage and the resulting set of linked SSTs). This will
enable us to add further consistency checks and to improve certain pieces of
functionality where knowing up front which blob files get obsoleted is beneficial.
(Note: this patch is just the refactoring part; I plan to create separate PRs for
the enhancements.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9085
Test Plan: Ran `make check` and the stress tests in BlobDB mode.
Reviewed By: riversand963
Differential Revision: D31980867
Pulled By: ltamasi
fbshipit-source-id: cc4286778b10900af720423d6b772c77f28a93e3
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9061
In write-prepared txn, checking a sequence's visibility in a released (old)
snapshot may return "Snapshot released". Suppose we have two snapshots:
```
earliest_snap < earliest_write_conflict_snap
```
If we release `earliest_write_conflict_snap` but keep `earliest_snap` during
bottommost level compaction, then it is possible that certain sequence of
events can lead to a PUT being seq-zeroed followed by a SingleDelete of the
same key. This violates the ascending order of keys, and will cause data
inconsistency.
Reviewed By: ltamasi
Differential Revision: D31813017
fbshipit-source-id: dc68ba2541d1228489b93cf3edda5f37ed06f285
Summary:
XXH3 - latest hash function that is extremely fast on large
data, easily faster than crc32c on most any x86_64 hardware. In
integrating this hash function, I have handled the compression type byte
in a non-standard way to avoid using the streaming API (extra data
movement and active code size because of hash function complexity). This
approach got a thumbs-up from Yann Collet.
Existing functionality change:
* reject bad ChecksumType in options with InvalidArgument
This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is
likely to be handled through different configuration than ChecksumType.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069
Test Plan:
tests updated, and substantially expanded. Unit tests now check
that we don't accidentally change the values generated by the checksum
algorithms ("schema test") and that we properly handle
invalid/unrecognized checksum types in options or in file footer.
DBTestBase::ChangeOptions (etc.) updated from two to one configuration
changing from default CRC32c ChecksumType. The point of this test code
is to detect possible interactions among features, and the likelihood of
some bad interaction being detected by including configurations other
than XXH3 and CRC32c--and then not detected by stress/crash test--is
extremely low.
Stress/crash test also updated (manual run long enough to see it accepts
new checksum type). db_bench also updated for microbenchmarking
checksums.
### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3
crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op)
xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op)
xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op)
xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op)
crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op)
xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op)
xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op)
xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op)
crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op)
xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op)
xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op)
xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op)
As you can see, especially once warmed up, xxh3 is fastest.
### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor)
Test
for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done
Results (ops/sec)
for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done
results-0 252118 # kNoChecksum
results-1 251588 # kCRC32c
results-2 251863 # kxxHash
results-3 252016 # kxxHash64
results-4 252038 # kXXH3
Reviewed By: mrambacher
Differential Revision: D31905249
Pulled By: pdillinger
fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
Summary:
The bug can impact the following scenario. There must be two `CompactRange()`s, call them A and B. Compaction A must have `change_level=true`. Compactions A and B must run in parallel, and new data must be added while they run as well.
Now, on to the details of the race condition. Compaction A must reach the refitting phase while B's next step is to trivial move new data (i.e., data that has been inserted behind A) down to the same level that A's refit targets (`CompactRangeOptions::target_level`). B must be unregistered (i.e., has not yet called `AddManualCompaction()` for the current `RunManualCompaction()`) while A invokes `DisableManualCompaction()`s to prepare for refitting. In the old code, B could still proceed to register a manual compaction, while A had disabled manual compaction.
The next part of the race condition is B picks and schedules a trivial move while A has released the lock in refitting phase in order to persist the LSM state change (i.e., the log phase of `LogAndApply()`). That way, B does not see the refitted data when picking a trivial-move compaction. So it is susceptible to picking one that overlaps.
Finally, B executes the picked trivial-move compaction. Trivial-move compactions are special in that they never check whether manual compaction is disabled. So the picked compaction causing overlap ends up being applied, leading to LSM corruption if `force_consistency_checks=false`, or entering read-only mode with `Status::Corruption` if `force_consistency_checks=true` (the default).
The fix is just to prevent B from registering itself in `RunManualCompaction()` while manual compactions are disabled, consequently preventing any trivial move or other compaction from being picked/scheduled.
Thanks to siying for finding the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9077
Test Plan: The test does not go all the way in exposing the bug because it requires a compaction to be picked/scheduled while logging LSM state change for RefitLevel(). But the fix is to make such a compaction not picked/scheduled in the first place, so any repro of that scenario would end up hanging RefitLevel() logging. So instead I just verified no such compaction is registered in the scenario where `RefitLevel()` disables manual compactions.
Reviewed By: siying
Differential Revision: D31921908
Pulled By: ajkr
fbshipit-source-id: 9bb5d0e847ad428211227f40830c685c209fbecb
Summary:
This PR adds support for building on s390x including updating travis CI. It uses the previous work in https://github.com/facebook/rocksdb/pull/6168 and adds some more changes to get all current tests (make check and jni tests) to pass. The tests were run with snappy, lz4, bzip2 and zstd all compiled in.
There are a few pieces still needed to get the travis build working that I don't think I can do. adamretter is this something you could help with?
1. A prebuilt https://rocksdb-deps.s3-us-west-2.amazonaws.com/cmake/cmake-3.14.5-Linux-s390x.deb package
2. A https://hub.docker.com/r/evolvedbinary/rocksjava s390x image
Not sure if there is more required for travis. Happy to help in any way I can.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8962
Reviewed By: mrambacher
Differential Revision: D31802198
Pulled By: pdillinger
fbshipit-source-id: 683511466fa6b505f85ba5a9964a268c6151f0c2
Summary:
In atomic flush, concurrent background flush threads will commit to the MANIFEST
one by one, in the order of the IDs of their picked memtables for all included column
families. Each time, a background flush thread decides whether to wait based on two
criteria:
- Is db stopped? If so, don't wait.
- Am I the one to commit the currently earliest memtable? If so, don't wait and ready to go.
When atomic flush was implemented, error writing to or syncing the MANIFEST would
cause the db to be stopped. Therefore, this background thread does not have to check
for the background error while waiting. If there has been such an error, `DBStopped()`
would have been true, and this thread will **not** wait forever.
After we improved error handling, RocksDB may map an IOError while writing to MANIFEST
to a soft error, if there is no WAL. This requires the background threads to check for
background error while waiting. Otherwise, a background flush thread may wait forever.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9034
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D31639225
Pulled By: riversand963
fbshipit-source-id: e9ab07c4d8f2eade238adeefe3e42dd9a5a3ebbd
Summary:
This PR does not change code sematics, it just changes for:
1. local obj `nonmem_w` and `lfile` are unused
2. null check for `delete ptr` is unnecessary
3. use `unique_ptr::reset` instead of `release` + `delete`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9052
Reviewed By: zhichao-cao
Differential Revision: D31801661
Pulled By: anand1976
fbshipit-source-id: 16a77d45da8c8833bf5bf3bce546bb3711b335df
Summary:
This PR has no semantic changes, just to make code shorter.
`stats_` has value same with `immutable_db_options_.stats`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9053
Reviewed By: zhichao-cao
Differential Revision: D31801603
Pulled By: anand1976
fbshipit-source-id: cbd8fe478d3e90ae078ace49b4f2eb9bb028ccf6
Summary:
This PR supports querying `GetMapProperty()` with "rocksdb.dbstats" to get the DB-level stats in a map format. It only reports cumulative stats over the DB lifetime and, as such, does not update the baseline for interval stats. Like other map properties, the string keys are not (yet) exposed in the public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9057
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D31781495
Pulled By: ajkr
fbshipit-source-id: 6f77d3aee8b4b1a015061b8c260a123859ceaf9b
Summary:
This commit introduces incremental compaction in univeral style for space amplification. This follows the first improvement mentioned in https://rocksdb.org/blog/2021/04/12/universal-improvements.html . The implemention simply picks up files about size of max_compaction_bytes to compact and execute if the penalty is not too big. More optimizations can be done in the future, e.g. prioritizing between this compaction and other types. But for now, the feature is supposed to be functional and can often reduce frequency of full compactions, although it can introduce penalty.
In order to add cut files more efficiently so that more files from upper levels can be included, SST file cutting threshold (for current file + overlapping parent level files) is set to 1.5X of target file size. A 2MB target file size will generate files like this: https://gist.github.com/siying/29d2676fba417404f3c95e6c013c7de8 Number of files indeed increases but it is not out of control.
Two set of write benchmarks are run:
1. For ingestion rate limited scenario, we can see full compaction is mostly eliminated: https://gist.github.com/siying/959bc1186066906831cf4c808d6e0a19 . The write amp increased from 7.7 to 9.4, as expected. After applying file cutting, the number is improved to 8.9. In another benchmark, the write amp is even better with the incremental approach: https://gist.github.com/siying/d1c16c286d7c59c4d7bba718ca198163
2. For ingestion rate unlimited scenario, incremental compaction turns out to be too expensive most of the time and is not executed, as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8655
Test Plan: Add unit tests to the functionality.
Reviewed By: ajkr
Differential Revision: D31787034
fbshipit-source-id: ce813e63b15a61d5a56e97bf8902a1b28e011beb
Summary:
Right now, when picking a compaction, grand parent files are from output_level + 1. This usually works, but if the level doesn't have any overlapping file, it will be more efficient to go further down. This is because the files are likely to be trivial moved further and might create a violation of max_compaction_bytes. This situation can naturally happen and might happen even more with TTL compactions. There is no harm to fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9051
Test Plan: Run existing tests and see it passes. Also briefly run crash test.
Reviewed By: ajkr
Differential Revision: D31748829
fbshipit-source-id: 52b99ab4284dc816d22f34406d528a3c98ff6719
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
`dbs` should not be cleared, as it is reused later when reopening the DBs, so we have an out-of-bounds access with `dbnames[dbnum]`. The values left in the vector don't need to be reset, as the db pointer is an out parameter for `DB::Open`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9046
Reviewed By: pdillinger
Differential Revision: D31738263
Pulled By: ot
fbshipit-source-id: c619e947b8d3dbc3d896f29971f093d3e3c794d3
Summary:
If `DB::Close()` is called in multi-thread env, the resource
could be double released, which causes exception or assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8970
Test Plan:
Test with multi-thread benchmark, with each thread try to
close the DB at the end.
Reviewed By: pdillinger
Differential Revision: D31242042
Pulled By: jay-zhuang
fbshipit-source-id: a61276b1b61e07732e375554106946aea86a23eb
Summary:
WaitForFlushMemTable() may only wait for mem flush but not background flush
finishing. The the obsoleted file may not be purged yet.
fcaa7ff638/db/db_impl/db_impl_compaction_flush.cc (L2200-L2203)
Use WaitForCompact() instead to wait for background flush job.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9049
Test Plan: `gtest-parallel ./obsolete_files_test --gtest_filter=ObsoleteFilesTest.DeleteObsoleteOptionsFile -r 1000`
Reviewed By: zhichao-cao
Differential Revision: D31737343
Pulled By: jay-zhuang
fbshipit-source-id: 82276ebeae7c7c75a733d3e1fd1c130d45e4761f
Summary:
New classes FileStorageInfo and LiveFileStorageInfo and
'experimental' function DB::GetLiveFilesStorageInfo, which is intended
to largely replace several fragmented DB functions needed to create
checkpoints and backups.
This function is now used to create checkpoints and backups, because
it fixes many (probably not all) of the prior complexities of checkpoint
not having atomic access to DB metadata. This also ensures strong
functional test coverage of the new API. Specifically, much of the old
CheckpointImpl::CreateCustomCheckpoint has been migrated to and
updated in DBImpl::GetLiveFilesStorageInfo, with the former now
calling the latter.
Also, the class FileStorageInfo in metadata.h compatibly replaces
BackupFileInfo and serves as a new base class for SstFileMetaData.
Some old fields of SstFileMetaData are still provided (for now) but
deprecated.
Although FileStorageInfo::directory is accurate when using db_paths
and/or cf_paths, these have never been supported by Checkpoint
nor BackupEngine and still are not. This change does now detect
these cases and return NotSupported when appropriate. (More work
needed for support.)
Somehow this change broke ProgressCallbackDuringBackup, but
the progress_callback logic was dubious to begin with because it
would call the callback based on copy buffer size, not size actually
copied. Logic and test updated to track size actually copied
per-thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968
Test Plan:
tests updated.
DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl.
DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo,
including reading the data after DB close.
Added CheckpointTest.CheckpointWithDbPath (NotSupported).
Reviewed By: siying
Differential Revision: D31242045
Pulled By: pdillinger
fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0
Summary:
The code in `IngestExternalFiles()` that bumps the DB's sequence number
depending on what seqnos were assigned to the files has 3 bugs:
1) There is an assertion that the sequence number is increased in all the
affected column families, but this is unnecessary, it is fine if some files can
stick to a lower sequence number. It is very easy to hit the assertion: it is
sufficient to insert 2 files in 2 CFs, one which overlaps the CF and one that
doesn't (for example the CF is empty). The line added in the
`IngestFilesIntoMultipleColumnFamilies_Success` test makes the assertion fail.
2) SetLastSequence() is called with the sum of all the bumps across CFs, but we
should take the maximum instead, as all CFs start with the current seqno and bump
it independently.
3) The code above is accidentally under a `#ifndef NDEBUG`, so it doesn't run in
optimized builds, so some files may be assigned seqnos from the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9005
Test Plan:
Added line in `IngestFilesIntoMultipleColumnFamilies_Success` that
triggers the assertion, verified that the test (and all the others) pass after
the fix.
Reviewed By: ajkr
Differential Revision: D31597892
Pulled By: ot
fbshipit-source-id: c2d3237f90290df1178736ace8653a9623f5a770
Summary:
EndWriteStall has a data race: `queue_.empty()` is checked outside of the
mutex, so once we enter the critical section another thread may already have
cleared the list, and accessing the `front()` is undefined behavior (and causes
interesting crashes under high concurrency).
This PR fixes the bug, and also rewrites the logic to make it easier to reason
about it. It also fixes another subtle bug: if some writers are stalled and
`SetBufferSize(0)` is called, which disables the WBM, the writer are not
unblocked because of an early `enabled()` check in `EndWriteStall()`.
It doesn't significantly change the locking behavior, as before writers won't
lock unless entering a stall condition, and `FreeMem` almost always locks if
stalling is allowed, but that is inevitable with the current design. Liveness is
guaranteed by the fact that if some writes are blocked, eventually all writes
will be blocked due to `stall_active_`, and eventually all memory is freed.
While at it, do a couple of optimizations:
- In `WBMStallInterface::Signal()` signal the CV only after releasing the
lock. Signaling under the lock is a common pitfall, as it causes the woken-up
thread to immediately go back to sleep because the mutex is still locked by
the awaker.
- Move all allocations and deallocations outside of the lock.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9009
Test Plan:
```
USE_CLANG=1 make -j64 all check
```
Reviewed By: akankshamahajan15
Differential Revision: D31550668
Pulled By: ot
fbshipit-source-id: 5125387c3dc7ecaaa2b8bbc736e58c4156698580
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
`FaultInjectionTest{Env,FS}::ReopenWritableFile()` functions were accidentally deleting WALs from previous `db_stress` runs causing verification to fail. They were operating under the assumption that `ReopenWritableFile()` would delete any existing file. It was a reasonable assumption considering the `{Env,FileSystem}::ReopenWritableFile()` documentation stated that would happen. The only problem was neither the implementations we offer nor the "real" clients in RocksDB code followed that contract. So, this PR updates the contract as well as fixing the fault injection client usage.
The fault injection change exposed that `ExternalSSTFileBasicTest.SyncFailure` was relying on a fault injection `Env` dropping unsynced data written by a regular `Env`. I changed that test to make its `SstFileWriter` use fault injection `Env`, and also implemented `LinkFile()` in fault injection so the unsynced data is tracked under the new name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8995
Test Plan:
- Verified it fixes the following failure:
```
$ ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --ops_per_thread=1000 --prefixpercent=0 --readpercent=60 --reopen=0 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
$ ./db_stress --avoid_flush_during_recovery=1 --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/rocksdb_crashtest_whitebox --delpercent=5 --destroy_db_initially=0 --expected_values_dir=/dev/shm/rocksdb_crashtest_expected --iterpercent=10 --key_len_percent_dist=1,30,69 --max_bytes_for_level_base=4194304 --max_key=100000 --max_key_len=3 --nooverwritepercent=1 --open_files=-1 --open_metadata_write_fault_one_in=8 --open_write_fault_one_in=16 --ops_per_thread=1000 --prefix_size=-1 --prefixpercent=0 --readpercent=50 --sync=1 --target_file_size_base=1048576 --test_batches_snapshots=0 --write_buffer_size=1048576 --writepercent=35 --value_size_mult=33 -threads=1
...
Verification failed for column family 0 key 000000000000001300000000000000857878787878 (1143): Value not found: NotFound:
Crash-recovery verification failed :(
...
```
- `make check -j48`
Reviewed By: ltamasi
Differential Revision: D31495388
Pulled By: ajkr
fbshipit-source-id: 7886ccb6a07cb8b78ad7b6c1c341ccf40bb68385
Summary:
Add the file temperature to `IngestExternalFileArg` such that when SST files are ingested, user is able to assign the temperature to each SST file. If the temperature vector is empty or its size does not match the file name vector size, all ingested SST files will be assigned with `Temperature::unKnown`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8949
Test Plan: add the new test and make check
Reviewed By: siying
Differential Revision: D31127852
Pulled By: zhichao-cao
fbshipit-source-id: 141a81f0f7b473d88f4ab0cb2a21a114cbc6f83c
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/8991
Test Plan: the new test hangs forever without this fix and passes with this fix.
Reviewed By: hx235
Differential Revision: D31456419
Pulled By: ajkr
fbshipit-source-id: a82c0e5560b6e6153089dccd8e46163c61b07bff
Summary:
This change introduces warnings instead of a silent override when trying to use level_compaction_dynamic_level_bytes with multiple cf_paths/db_paths.
I have completed the CLA.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8329
Reviewed By: hx235
Differential Revision: D31399713
Pulled By: ajkr
fbshipit-source-id: 29c6fe5258d1f739b4590ecd44aee44f55415595
Summary:
For tiered storage project, we need to know the block read count and read bytes of files with different temperature. Add FileIOByTemperature to IOStatsContext and collect the bytes read and read count from different temperature files through the RandomAccessFileReader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8710
Test Plan: make check, add the testing cases
Reviewed By: siying
Differential Revision: D30582400
Pulled By: zhichao-cao
fbshipit-source-id: d83173de594374fc8404af5ce93a6a9be72c7141
Summary:
- Update few stale GitHub wiki link references from rocksdb.org
- Update the API comments for ignore_range_deletions
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8983
Reviewed By: ajkr
Differential Revision: D31355965
Pulled By: ramvadiv
fbshipit-source-id: 245ac4a6913976dd82afa308bc4aae6bff3d788c
Summary:
There were three implementations of VectorIterator (util/vector_iterator, test_util/testutil.h and LoggingForwardVectorIterator). Merged them into one class to increase code coverage/testing and reduce duplication.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8901
Reviewed By: pdillinger
Differential Revision: D31022673
Pulled By: mrambacher
fbshipit-source-id: 8e3acbd2dfd60b4df609d02cc72846de2389d531
Summary:
This change adds File IO Notifications to the SequentialFileReader The SequentialFileReader is extended
with a listener parameter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8982
Test Plan:
A new test EventListenerTest::OnWALOperationTest has been added. The
test verifies that during restore the sequential file reader is called
and the notifications are fired.
Reviewed By: riversand963
Differential Revision: D31320844
Pulled By: shrfb
fbshipit-source-id: 040b24da7c010d7c14ebb5c6460fae9a19b8c168
Summary:
On MacOS, there were errors building in LITE mode related to unused private member variables:
In file included from ./db/compaction/compaction_job.h:20:
./db/blob/blob_file_completion_callback.h:87:19: error: private field ‘sst_file_manager_’ is not used [-Werror,-Wunused-private-field]
SstFileManager* sst_file_manager_;
^
./db/blob/blob_file_completion_callback.h:88:22: error: private field ‘mutex_’ is not used [-Werror,-Wunused-private-field]
InstrumentedMutex* mutex_;
^
./db/blob/blob_file_completion_callback.h:89:17: error: private field ‘error_handler_’ is not used [-Werror,-Wunused-private-field]
ErrorHandler* error_handler_;
This PR resolves those build issues by removing the values as members in LITE mode and fixing the constructor to ignore the input values in LITE mode (otherwise we get unused parameter warnings).
Tested by validating compiles without warnings.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8981
Reviewed By: akankshamahajan15
Differential Revision: D31320141
Pulled By: mrambacher
fbshipit-source-id: d67875ebbd39a9555e4f09b2d37159566dd8a085
Akanksha Mahajan