Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
To make it consistent with the compaction picker which uses the `sstableKeyCompare()` to pick the overlap files. For example, without this change, it may cut L1 files like:
```
L1: [2-21] [22-30]
L2: [1-10] [21-30]
```
Because "21" on L1 is smaller than "21" on L2. But for compaction, these 2 files are overlapped.
`sstableKeyCompare()` also take range delete into consideration which may cut file for the same key.
It also makes the `max_compaction_bytes` calculation more accurate for cases like above, the overlapped bytes was under estimated. Also make sure the 2 keys won't be splitted to 2 files because of reaching `max_compaction_bytes`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10763
Reviewed By: cbi42
Differential Revision: D39971904
Pulled By: cbi42
fbshipit-source-id: bcc309e9c3dc61a8f50667a6f633e6132c0154a8
Summary:
Try to align the compaction output file boundaries to the next level ones
(grandparent level), to reduce the level compaction write-amplification.
In level compaction, there are "wasted" data at the beginning and end of the
output level files. Align the file boundary can avoid such "wasted" compaction.
With this PR, it tries to align the non-bottommost level file boundaries to its
next level ones. It may cut file when the file size is large enough (at least
50% of target_file_size) and not too large (2x target_file_size).
db_bench shows about 12.56% compaction reduction:
```
TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432
# baseline:
Flush(GB): cumulative 25.882, interval 7.216
Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds
# with this change:
Flush(GB): cumulative 25.882, interval 7.753
Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds
```
The compaction simulator shows a similar result (14% with 100G random data).
As a side effect, with this PR, the SST file size can exceed the
target_file_size, but is capped at 2x target_file_size. And there will be
smaller files. Here are file size statistics when loading 100GB with the target
file size 32MB:
```
baseline this_PR
count 1.656000e+03 1.705000e+03
mean 3.116062e+07 3.028076e+07
std 7.145242e+06 8.046139e+06
```
The feature is enabled by default, to revert to the old behavior disable it
with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false`
Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for
use case like user adding 2 or more non-overlapping data range at the same
time, it can reduce the overlapping of 2 datasets in the lower levels.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655
Reviewed By: cbi42
Differential Revision: D39552321
Pulled By: jay-zhuang
fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
Summary:
When user-defined timestamp is enabled, subcompaction bounds should be set up properly. When creating InputIterator for the compaction, the `start` and `end` should have their timestamp portions set to kMaxTimestamp, which is the highest possible timestamp. This is similar to what we do with setting up their sequence numbers to `kMaxSequenceNumber`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10658
Test Plan:
```bash
make check
rm -rf /dev/shm/rocksdb/* && mkdir
/dev/shm/rocksdb/rocksdb_crashtest_expected && ./db_stress
--allow_data_in_errors=True --clear_column_family_one_in=0
--continuous_verification_interval=0 --data_block_index_type=1
--db=/dev/shm/rocksdb//rocksdb_crashtest_blackbox --delpercent=5
--delrangepercent=0
--expected_values_dir=/dev/shm/rocksdb//rocksdb_crashtest_expected
--iterpercent=0 --max_background_compactions=20
--max_bytes_for_level_base=10485760 --max_key=25000000
--max_write_batch_group_size_bytes=1048576 --nooverwritepercent=1
--ops_per_thread=300000 --paranoid_file_checks=1 --partition_filters=0
--prefix_size=8 --prefixpercent=5 --readpercent=30 --reopen=0
--snapshot_hold_ops=100000 --subcompactions=4
--target_file_size_base=65536 --target_file_size_multiplier=2
--test_batches_snapshots=0 --test_cf_consistency=0 --use_multiget=1
--user_timestamp_size=8 --value_size_mult=32 --verify_checksum=1
--write_buffer_size=65536 --writepercent=60 -disable_wal=1
-column_families=1
```
Reviewed By: akankshamahajan15
Differential Revision: D39393402
Pulled By: riversand963
fbshipit-source-id: f276e35b19fce51a175c368a502fb0718d1f3871
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
Summary:
FileMetaData::[min|max]_timestamp are not currently being used or
tracked by RocksDB, even when user-defined timestamp is enabled. Each of
them is a std::string which can occupy 32 bytes. Remove them for now.
They may be added back when we have a pressing need for them. When we do
add them back, consider store them in a more compact way, e.g. one
boolean flag and a byte array of size 16.
Per file min/max timestamp bounds are available as table properties.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D38292275
Pulled By: riversand963
fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94
Summary:
Support per_key_placement for last level compaction, which will
be used for tiered compaction.
* compaction iterator reports which level a key should output to;
* compaction get the output level information and check if it's safe to
output the data to penultimate level;
* all compaction output files will be installed.
* extra internal compaction stats added for penultimate level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9964
Test Plan:
* Unittest
* db_bench, no significate difference: https://gist.github.com/jay-zhuang/3645f8fb97ec0ab47c10704bb39fd6e4
* microbench manual compaction no significate difference: https://gist.github.com/jay-zhuang/ba679b3e89e24992615ee9eef310e6dd
* run the db_stress multiple times (not covering the new feature) looks good (internal: https://fburl.com/sandcastle/9w84pp2m)
Reviewed By: ajkr
Differential Revision: D36249494
Pulled By: jay-zhuang
fbshipit-source-id: a96da57c8031c1df83e4a7a8567b657a112b80a3
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost.
Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel!
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198
Reviewed By: ltamasi
Differential Revision: D37294735
Pulled By: gangliao
fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e
Summary:
**Summary:**
Add unit tests to verify that the dynamic priority can be passed from compaction to FS. Compaction reads&writes and other DB reads&writes share the same read&write paths to FSRandomAccessFile or FSWritableFile, so a MockTestFileSystem is added to replace the default filesystem from Env to intercept and verify the io_priority. To prepare the compaction input files, use the default filesystem from Env. To test the io priority of the compaction reads and writes, db_options_.fs is set as MockTestFileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10088
Test Plan: Add unit tests.
Reviewed By: anand1976
Differential Revision: D36882528
Pulled By: gitbw95
fbshipit-source-id: 120adc15801966f2b8c9fc45285f590a3fff96d1
Summary:
As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`.
Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070
Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test).
Reviewed By: ajkr
Differential Revision: D36949133
Pulled By: littlepig2013
fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
### Context:
Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users.
From the RocksDB perspective, there can be two kinds of rate limiters, the internal (native) one and the external one.
- The internal (native) rate limiter is introduced in [the wiki](https://github.com/facebook/rocksdb/wiki/Rate-Limiter). Currently, only IO_LOW and IO_HIGH are used and they are set statically.
- For the external rate limiter, in FSWritableFile functions, IOOptions is open for end users to set and get rate_limiter_priority for their own rate limiter. Currently, RocksDB doesn’t pass the rate_limiter_priority through IOOptions to the file system.
### Solution
During the User Read, Flush write, Compaction read/write, the WriteController is used to determine whether DB writes are stalled or slowed down. The rate limiter priority (Env::IOPriority) can be determined accordingly. We decided to always pass the priority in IOOptions. What the file system does with it should be a contract between the user and the file system. We would like to set the rate limiter priority at file level, since the Flush/Compaction job level may be too coarse with multiple files and block IO level is too granular.
**This PR is for the Write path.** The **Write:** dynamic priority for different state are listed as follows:
| State | Normal | Delayed | Stalled |
| ----- | ------ | ------- | ------- |
| Flush | IO_HIGH | IO_USER | IO_USER |
| Compaction | IO_LOW | IO_USER | IO_USER |
Flush and Compaction writes share the same call path through BlockBaseTableWriter, WritableFileWriter, and FSWritableFile. When a new FSWritableFile object is created, its io_priority_ can be set dynamically based on the state of the WriteController. In WritableFileWriter, before the call sites of FSWritableFile functions, WritableFileWriter::DecideRateLimiterPriority() determines the rate_limiter_priority. The options (IOOptions) argument of FSWritableFile functions will be updated with the rate_limiter_priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9988
Test Plan: Add unit tests.
Reviewed By: anand1976
Differential Revision: D36395159
Pulled By: gitbw95
fbshipit-source-id: a7c82fc29759139a1a07ec46c37dbf7e753474cf
Summary:
PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete.
For some of existing use cases, it is desirable to have a transition during which compaction will not fail
if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow
application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again.
In a future release, the option will be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36333672
Pulled By: riversand963
fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
Enforce the contract of SingleDelete so that they are not mixed with
Delete for the same key. Otherwise, it will lead to undefined behavior.
See https://github.com/facebook/rocksdb/wiki/Single-Delete#notes.
Also fix unit tests and write-unprepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9888
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D35837817
Pulled By: riversand963
fbshipit-source-id: acd06e4dcba8cb18df92b44ed18c57e10e5a7635
Summary:
**This PR does not affect the functionality of `DB` and write-committed transactions.**
`CompactionIterator` uses `KeyCommitted(seq)` to determine if a key in the database is committed.
As the name 'write-committed' implies, if write-committed policy is used, a key exists in the database only if
it is committed. In fact, the implementation of `KeyCommitted()` is as follows:
```
inline bool KeyCommitted(SequenceNumber seq) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(seq, kMaxSequence) == SnapshotCheckerResult::kInSnapshot;
}
```
With that being said, we focus on write-prepared/write-unprepared transactions.
A few notes:
- A key can exist in the db even if it's uncommitted. Therefore, we rely on `snapshot_checker_` to determine data visibility. We also require that all writes go through transaction API instead of the raw `WriteBatch` + `Write`, thus at most one uncommitted version of one user key can exist in the database.
- `CompactionIterator` outputs a key as long as the key is uncommitted.
Due to the above reasons, it is possible that `CompactionIterator` decides to output an uncommitted key without
doing further checks on the key (`NextFromInput()`). By the time the key is being prepared for output, the key becomes
committed because the `snapshot_checker_(seq, kMaxSequence)` becomes true in the implementation of `KeyCommitted()`.
Then `CompactionIterator` will try to zero its sequence number and hit assertion error if the key is a tombstone.
To fix this issue, we should make the `CompactionIterator` see a consistent view of the input keys. Note that
for write-prepared/write-unprepared, the background flush/compaction jobs already take a "job snapshot" before starting
processing keys. The job snapshot is released only after the entire flush/compaction finishes. We can use this snapshot
to determine whether a key is committed or not with minor change to `KeyCommitted()`.
```
inline bool KeyCommitted(SequenceNumber sequence) {
// For non-txn-db and write-committed, snapshot_checker_ is always nullptr.
return snapshot_checker_ == nullptr ||
snapshot_checker_->CheckInSnapshot(sequence, job_snapshot_) ==
SnapshotCheckerResult::kInSnapshot;
}
```
As a result, whether a key is committed or not will remain a constant throughout compaction, causing no trouble
for `CompactionIterator`s assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9830
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35561162
Pulled By: riversand963
fbshipit-source-id: 0e00d200c195240341cfe6d34cbc86798b315b9f
Summary:
Options `preserve_deletes` and `iter_start_seqnum` have been removed since 7.0.
This PR removes dead code related to these two removed options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9825
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D35517950
Pulled By: riversand963
fbshipit-source-id: 86282ce5ec4087acb94a06a42a1b6d55b1715482
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
Track per-SST user-defined timestamp information in MANIFEST https://github.com/facebook/rocksdb/issues/8957
Rockdb has supported user-defined timestamp feature. Application can specify a timestamp
when writing each k-v pair. When data flush from memory to disk file called SST files, file
creation activity will commit to MANIFEST. This commit is for tracking timestamp info in the
MANIFEST for each file. The changes involved are as follows:
1) Track max/min timestamp in FileMetaData, and fix invoved codes.
2) Add NewFileCustomTag::kMinTimestamp and NewFileCustomTag::kMinTimestamp in
NewFileCustomTag ( in the kNewFile4 part ), and support invoved codes such as
VersionEdit Encode and Decode etc.
3) Add unit test code for VersionEdit EncodeDecodeNewFile4, and fix invoved test codes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9092
Reviewed By: ajkr, akankshamahajan15
Differential Revision: D32252323
Pulled By: riversand963
fbshipit-source-id: d2642898d6e3ad1fef0eb866b98045408bd4e162
Summary:
For multiple versions (ts + seq) of the same user key, if they cross the boundary of `full_history_ts_low_`,
we should retain the version that is visible to the `full_history_ts_low_`. Namely, we keep the internal key
with the largest timestamp smaller than `full_history_ts_low`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9116
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32261514
Pulled By: riversand963
fbshipit-source-id: e10f47c254c04c05261440051e4f50cb7d95474e
Summary:
Allow compaction_job_test, db_io_failure_test, dbformat_test, deletefile_test, and fault_injection_test to use a custom Env object. Also move ```RegisterCustomObjects``` declaration to a header file to simplify things.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9087
Test Plan: Run manually using "buck test rocksdb/src:compaction_job_test_fbcode" etc.
Reviewed By: riversand963
Differential Revision: D32007222
Pulled By: anand1976
fbshipit-source-id: 99af58559e25bf61563dfa95dc46e31fa7375792
Summary:
Added support for SingleDelete for user-defined timestamps. Users can now Get and Iterate over keys deleted with SingleDelete. It also includes changes in CompactionIterator which preserves the same user key with different timestamps, unless the timestamp is below a certain threshold full_history_ts_low.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8921
Test Plan: Added new unit tests
Reviewed By: riversand963
Differential Revision: D31098191
Pulled By: akankshamahajan15
fbshipit-source-id: 78a59ef4b4884ae324fcd10f56e62a27d5ee2f49
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
Currently, we either use the file system inode or a monotonically incrementing runtime ID as the block cache key prefix. However, if we use a monotonically incrementing runtime ID (in the case that the file system does not support inode id generation), in some cases, it cannot ensure uniqueness (e.g., we have secondary cache migrated from host to host). We use DbSessionID (20 bytes) + current file number (at most 10 bytes) as the new cache block key prefix when the secondary cache is enabled. So can accommodate scenarios such as transfer of cache state across hosts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8360
Test Plan: add the test to lru_cache_test
Reviewed By: pdillinger
Differential Revision: D29006215
Pulled By: zhichao-cao
fbshipit-source-id: 6cff686b38d83904667a2bd39923cd030df16814
Summary:
Added the ability to cancel an in-progress range compaction by storing to an atomic "canceled" variable pointed to within the CompactRangeOptions structure.
Tested via two tests added to db_tests2.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8351
Reviewed By: ajkr
Differential Revision: D28808894
Pulled By: ddevec
fbshipit-source-id: cb321361c9e23b084b188bb203f11c375a22c2dd
Summary:
The functions will be used for remote compaction parameter
input and result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8247
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D28104680
Pulled By: jay-zhuang
fbshipit-source-id: c0a5178e6277125118384278efea2acbf90aa6cb
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.
Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851
Reviewed By: anand1976
Differential Revision: D26114816
Pulled By: mrambacher
fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
Summary:
This PR does the following:
-> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems.
-> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls
-> Eliminates the public uses of the LegacyFileSystemWrapper.
With this change in place, there are effectively the following patterns of Env:
- "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system.
- Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system
- Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself.
With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction.
Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703
Reviewed By: zhichao-cao
Differential Revision: D25762190
Pulled By: anand1976
fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
Summary:
Added "no-elide-constructors to the ASSERT_STATUS_CHECK builds. This flag gives more errors/warnings for some of the Status checks where an inner class checks a Status and later returns it. In this case, without the elide check on, the returned status may not have been checked in the caller, thereby bypassing the checked code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7798
Reviewed By: jay-zhuang
Differential Revision: D25680451
Pulled By: pdillinger
fbshipit-source-id: c3f14ed9e2a13f0a8c54d839d5fb4d1fc1e93917
Summary:
https://github.com/facebook/rocksdb/issues/7556 enables `CompactionIterator` to perform garbage collection during compaction according
to a lower bound (user-defined) timestamp `full_history_ts_low_`.
This PR adds a data member `full_history_ts_low_` of type `std::string` to `CompactionJob`, and
`full_history_ts_low_` does not change during compaction. `CompactionJob` will pass a pointer to this
data member to the `CompactionIterator` used during compaction.
Also refactored compaction_job_test.cc to re-use some existing code, which is actually the majority of this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7657
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24913803
Pulled By: riversand963
fbshipit-source-id: 11ad5329ddac365667152e7b3b02f84182c0ca8e
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467
Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.
Reviewed By: riversand963
Differential Revision: D24010683
fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
Summary:
Fix few test cases and add them in ASSERT_STATUS_CHECKED build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7427
Test Plan:
1. ASSERT_STATUS_CHECKED=1 make -j48 check,
2. travis build for ASSERT_STATUS_CHECKED,
3. Without ASSERT_STATUS_CHECKED: make check -j64, CircleCI build and travis build
Reviewed By: pdillinger
Differential Revision: D23909983
Pulled By: akankshamahajan15
fbshipit-source-id: 42d7e4aea972acb9fcddb7ca73fcb82f93272434
Summary:
As part of the IOTracing project, this PR
1. Caches "FileSystemPtr" object(wrapper class that returns file system pointer based on tracing enabled) instead of "FileSystem" pointer.
2. FileSystemPtr object is created using FileSystem pointer and IOTracer
pointer.
3. IOTracer shared_ptr is created in DBImpl and it is passed to different classes through constructor.
4. When tracing is enabled through DB::StartIOTrace, FileSystemPtr
returns FileSystemTracingWrapper pointer for tracing purpose and when
it is disabled underlying FileSystem pointer is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7180
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D22987117
Pulled By: akankshamahajan15
fbshipit-source-id: 6073617e4c2d5bc363914f3a1f55ae3b0a58fbf1
Summary:
Currently, RocksDB lets compaction to go through even in case of
corrupted keys, the number of which is reported in CompactionJobStats.
However, RocksDB does not check this value. We should let compaction run
in a stricter mode.
Temporarily disable two tests that allow corrupted keys in compaction.
With this PR, the two tests will assert(false) and terminate. Still need
to investigate what is the recommended google-test way of doing it.
Death test (EXPECT_DEATH) in gtest has warnings now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7124
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22530722
Pulled By: riversand963
fbshipit-source-id: 6a5a6a992028c6d4f92cb74693c92db462ae4ad6
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615
Test Plan: Add a unit test to make sure that SetOptions() can change the options.
Reviewed By: riversand963
Differential Revision: D20755951
fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
options.periodic_compaction_seconds isn't supported when options.max_open_files != -1. It's because that the information of file creation time is stored in table properties and are not guaranteed to be loaded unless options.max_open_files = -1. Relax this constraint by storing the information in manifest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6090
Test Plan: Pass all existing tests; Modify an existing test to force the manifest value to take 0 to simulate backward compatibility case; manually open the DB generated with the change by release 4.2.
Differential Revision: D18702268
fbshipit-source-id: 13e0bd94f546498a04f3dc5fc0d9dff5125ec9eb
Summary:
Previously, options.ttl cannot be set with options.max_open_files = -1, because it makes use of creation_time field in table properties, which is not available unless max_open_files = -1. With this commit, the information will be stored in manifest and when it is available, will be used instead.
Note that, this change will break forward compatibility for release 5.1 and older.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6060
Test Plan: Extend existing test case to options.max_open_files != -1, and simulate backward compatility in one test case by forcing the value to be 0.
Differential Revision: D18631623
fbshipit-source-id: 30c232a8672de5432ce9608bb2488ecc19138830
