Summary:
As mentioned in https://github.com/facebook/rocksdb/issues/11893, we are going to use the offpeak time information to pre-process TTL-based compactions. To do so, we need to access `daily_offpeak_time_utc` in `VersionStorageInfo::ComputeCompactionScore()` where we pick the files to compact. This PR is to make the offpeak time information available at the time of compaction-scoring. We are not changing any compaction scoring logic just yet. Will follow up in a separate PR.
There were two ways to achieve what we want.
1. Make `MutableDBOptions` available in `ColumnFamilyData` and `ComputeCompactionScore()` take `MutableDBOptions` along with `ImmutableOptions` and `MutableCFOptions`.
2. Make `daily_offpeak_time_utc` and `IsNowOffpeak()` available in `VersionStorageInfo`.
We chose the latter as it involves smaller changes.
This change includes the following
- Introduction of `OffpeakTimeInfo` and `IsNowOffpeak()` has been moved from `MutableDBOptions`
- `OffpeakTimeInfo` added to `VersionSet` and it can be set during construction and by `ChangeOffpeakTimeInfo()`
- During `SetDBOptions()`, if offpeak time info needs to change, it calls `MaybeScheduleFlushOrCompaction()` to re-compute compaction scores and process compactions as needed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12018
Test Plan:
- `DBOptionsTest::OffpeakTimes` changed to include checks for `MaybeScheduleFlushOrCompaction()` calls and `VersionSet`'s OffpeakTimeInfo value change during `SetDBOptions()`.
- `VersionSetTest::OffpeakTimeInfoTest` added to test `ChangeOffpeakTimeInfo()`. `IsNowOffpeak()` tests moved from `DBOptionsTest::OffpeakTimes`
Reviewed By: pdillinger
Differential Revision: D50723881
Pulled By: jaykorean
fbshipit-source-id: 3cff0291936f3729c0e9c7750834b9378fb435f6
Summary:
**Context:**
DB destruction will wait for ongoing error recovery through `EndAutoRecovery()` and join the recovery thread: 519f2a41fb/db/db_impl/db_impl.cc (L525) -> 519f2a41fb/db/error_handler.cc (L250) -> 519f2a41fb/db/error_handler.cc (L808-L823)
However, due to a race between flush error recovery and db destruction, recovery can actually start after such wait during the db shutdown. The consequence is that the recovery thread created as part of this recovery will not be properly joined upon its destruction as part the db destruction. It then crashes the program as below.
```
std::terminate()
std::default_delete<std::thread>::operator()(std::thread*) const
std::unique_ptr<std::thread, std::default_delete<std::thread>>::~unique_ptr()
rocksdb::ErrorHandler::~ErrorHandler() (rocksdb/db/error_handler.h:31)
rocksdb::DBImpl::~DBImpl() (rocksdb/db/db_impl/db_impl.cc:725)
rocksdb::DBImpl::~DBImpl() (rocksdb/db/db_impl/db_impl.cc:725)
rocksdb::DBTestBase::Close() (rocksdb/db/db_test_util.cc:678)
```
**Summary:**
This PR fixed it by considering whether EndAutoRecovery() has been called before creating such thread. This fix is similar to how we currently [handle](519f2a41fb/db/error_handler.cc (L688-L694)) such case inside the created recovery thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12002
Test Plan: A new UT repro-ed the crash before this fix and and pass after.
Reviewed By: ajkr
Differential Revision: D50586191
Pulled By: hx235
fbshipit-source-id: b372f6d7a94eadee4b9283b826cc5fb81779a093
Summary:
With fragmented record span across multiple blocks, if any following blocks corrupted with arbitary data, and intepreted log number less than the current log number, program will fall into infinite loop due to
not skipping buffer leading bytes
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11979
Test Plan: existing unit tests
Reviewed By: ajkr
Differential Revision: D50604408
Pulled By: jowlyzhang
fbshipit-source-id: e50a0c7e7c3d293fb9d5afec0a3eb4a1835b7a3b
Summary:
... and other fixes for crash test after https://github.com/facebook/rocksdb/issues/11922.
* When pre-allocating sequence numbers for establishing a time history, record that last sequence number in the manifest so that it is (most likely) restored on recovery even if no user writes were made or were recovered (e.g. no WAL).
* When pre-allocating sequence numbers for establishing a time history, only do this for actually new DBs.
* Remove the feature that ensures non-zero sequence number on creating the first column family with preserve/preclude option after initial DB::Open. Until fixed in a way compatible with the crash test, this creates a gap where some data written with active preserve/preclude option won't have a known associated time.
Together, these ensure we don't upset the crash test by manipulating sequence numbers after initial DB creation (esp when re-opening with different options). (The crash test expects that the seqno after re-open corresponds to a known point in time from previous crash test operation, matching an expected DB state.)
Follow-up work:
* Re-fill the gap to ensure all data written under preserve/preclude settings have a known time estimate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11995
Test Plan:
Added to unit test SeqnoTimeTablePropTest.PrePopulateInDB
Verified fixes two crash test scenarios:
## 1st reproducer
First apply
```
diff --git a/db_stress_tool/expected_state.cc b/db_stress_tool/expected_state.cc
index b483e154c..ef63b8d6c 100644
--- a/db_stress_tool/expected_state.cc
+++ b/db_stress_tool/expected_state.cc
@@ -333,6 +333,7 @@ Status FileExpectedStateManager::SaveAtAndAfter(DB* db) {
s = NewFileTraceWriter(Env::Default(), soptions, trace_file_path,
&trace_writer);
}
+ if (getenv("CRASH")) assert(false);
if (s.ok()) {
TraceOptions trace_opts;
trace_opts.filter |= kTraceFilterGet;
```
Then
```
mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_expected
mkdir -p /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox
rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/*
CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=36000
./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --preserve_internal_time_seconds=0
```
Without the fix you get
```
...
DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox]
(Re-)verified 34 unique IDs
Error restoring historical expected values: Corruption: DB is older than any restorable expected state
```
## 2nd reproducer
First apply
```
diff --git a/db_stress_tool/db_stress_test_base.cc b/db_stress_tool/db_stress_test_base.cc
index 62ddead7b..f2654980f 100644
--- a/db_stress_tool/db_stress_test_base.cc
+++ b/db_stress_tool/db_stress_test_base.cc
@@ -1126,6 +1126,7 @@ void StressTest::OperateDb(ThreadState* thread) {
// OPERATION write
TestPut(thread, write_opts, read_opts, rand_column_families, rand_keys,
value);
+ if (getenv("CRASH")) assert(false);
} else if (prob_op < del_bound) {
assert(write_bound <= prob_op);
// OPERATION delete
```
Then
```
rm -rf /dev/shm/rocksdb_test/rocksdb_crashtest_*/*
CRASH=1 ./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=1 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=0
./db_stress --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --destroy_db_initially=0 --manual_wal_flush_one_in=1000000 --clear_column_family_one_in=0 --disable_wal=1 --reopen=0 --preserve_internal_time_seconds=3600
```
Without the fix you get
```
DB path: [/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox]
(Re-)verified 34 unique IDs
db_stress: db_stress_tool/expected_state.cc:380: virtual rocksdb::{anonymous}::ExpectedStateTraceRecordHandler::~
ExpectedStateTraceRecordHandler(): Assertion `IsDone()' failed.
```
Reviewed By: jowlyzhang
Differential Revision: D50533346
Pulled By: pdillinger
fbshipit-source-id: 1056be45c5b9e537c8c601b28c4b27431a782477
Summary:
Context/Summary: as titled
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11957
Test Plan: piggyback on existing tests; fixed a failed test due to adding new stats
Reviewed By: ajkr, cbi42
Differential Revision: D50294310
Pulled By: hx235
fbshipit-source-id: d99b97ebac41efc1bdeaf9ca7a1debd2927d54cd
Summary:
... when compiled with ASSERT_STATUS_CHECKED = 1.
The main change is in iterator_wrapper.h. The remaining changes are just fixing existing unit tests. Adding this check to IteratorWrapper gives a good coverage as the class is used in many places, including child iterators under merging iterator, merging iterator under DB iter, file_iter under level iterator, etc. This change can catch the bug fixed in https://github.com/facebook/rocksdb/issues/11782.
Future follow up: enable `ASSERT_STATUS_CHECKED=1` for stress test and for DEBUG_LEVEL=0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11975
Test Plan:
* `ASSERT_STATUS_CHECKED=1 DEBUG_LEVEL=2 make -j32 J=32 check`
* I tried to run stress test with `ASSERT_STATUS_CHECKED=1`, but there are a lot of existing stress code that ignore status checking, and fail without the change in this PR. So defer that to a follow up task.
Reviewed By: ajkr
Differential Revision: D50383790
Pulled By: cbi42
fbshipit-source-id: 1a28ce0f5fdf1890f93400b26b3b1b3a287624ce
Summary:
A race condition between recovery and backup can happen with error messages like this:
```Failure in BackupEngine::CreateNewBackup with: IO error: No such file or directory: While opening a file for sequentially reading: /dev/shm/rocksdb_test/rocksdb_crashtest_whitebox/002653.log: No such file or directory```
PR https://github.com/facebook/rocksdb/issues/6949 introduced disabling file deletion during error handling of manifest IO errors. Aformentioned race condition is caused by this chain of event:
[Backup engine] disable file deletion
[Recovery] disable file deletion <= this is optional for the race condition, it may or may not get called
[Backup engine] get list of file to copy/link
[Recovery] force enable file deletion
.... some files refered by backup engine get deleted
[Backup engine] copy/link file <= error no file found
This PR fixes this with:
1) Recovery thread is currently forcing enabling file deletion as long as file deletion is disabled. Regardless of whether the previous error handling is for manifest IO error and that disabled it in the first place. This means it could incorrectly enabling file deletions intended by other threads like backup threads, file snapshotting threads. This PR does this check explicitly before making the call.
2) `disable_delete_obsolete_files_` is designed as a counter to allow different threads to enable and disable file deletion separately. The recovery thread currently does a force enable file deletion, because `ErrorHandler::SetBGError()` can be called multiple times by different threads when they receive a manifest IO error(details per PR https://github.com/facebook/rocksdb/issues/6949), resulting in `DBImpl::DisableFileDeletions` to be called multiple times too. Making a force enable file deletion call that resets the counter `disable_delete_obsolete_files_` to zero is a workaround for this. However, as it shows in the race condition, it can incorrectly suppress other threads like a backup thread's intention to keep the file deletion disabled. <strike>This PR adds a `std::atomic<int> disable_file_deletion_count_` to the error handler to track the needed counter decrease more precisely</strike>. This PR tracks and caps file deletion enabling/disabling in error handler.
3) for recovery, the section to find obsolete files and purge them was moved to be done after the attempt to enable file deletion. The actual finding and purging is more likely to happen if file deletion was previously disabled and get re-enabled now. An internal function `DBImpl::EnableFileDeletionsWithLock` was added to support change 2) and 3). Some useful logging was explicitly added to keep those log messages around.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11955
Test Plan: existing unit tests
Reviewed By: anand1976
Differential Revision: D50290592
Pulled By: jowlyzhang
fbshipit-source-id: 73aa8331ca4d636955a5b0324b1e104a26e00c9b
Summary:
This has become obsolete with the new `options_mutex_` in https://github.com/facebook/rocksdb/pull/11929
* Remove now-unnecessary parameter from WriteOptionsFile
* Rename (and negate) other parameter for better clarity (the caller shouldn't tell the callee what the callee needs, just what the caller knows, provides, and requests)
* Move a ROCKS_LOG_WARN (I/O) in WriteOptionsFile to outside of holding DB mutex.
* Also *avoid* (but not always eliminate) write queue synchronization in SetDBOptions. Still needed if there was a change to WAL size limit or other configuration.
* Improve some comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11951
Test Plan: existing unit tests and TSAN crash test local run
Reviewed By: ajkr
Differential Revision: D50247904
Pulled By: pdillinger
fbshipit-source-id: 7dfe445c705ec013886a2adb7c50abe50d83af69
Summary:
Introducing the notion of AttributeGroup by adding the `MultiGetEntity()` API retrieving `PinnableAttributeGroups`.
An "attribute group" refers to a logical grouping of wide-column entities within RocksDB. These attribute groups are implemented using column families.
Users can store WideColumns in different CFs for various reasons (e.g. similar access patterns, same types, etc.). This new API `MultiGetEntity()` takes keys and `PinnableAttributeGroups` per key. `PinnableAttributeGroups` is just a list of `PinnableAttributeGroup`s in which we have `ColumnFamilyHandle*`, `Status`, and `PinnableWideColumns`.
Let's say a user stored "hot" wide columns in column family "hot_data_cf" and "cold" wide columns in column family "cold_data_cf" and all other columns in "common_cf".
Prior to this PR, if the user wants to query for two keys, "key_1" and "key_2" and but only interested in "common_cf" and "hot_data_cf" for "key_1", and "common_cf" and "cold_data_cf" for "key_2", the user would have to construct input like `keys = ["key_1", "key_1", "key_2", "key_2"]`, `column_families = ["common_cf", "hot_data_cf", "common_cf", "cold_data_cf"]` and get the flat list of `PinnableWideColumns` to find the corresponding <key,CF> combo.
With the new `MultiGetEntity()` introduced in this PR, users can now query only `["common_cf", "hot_data_cf"]` for `"key_1"`, and only `["common_cf", "cold_data_cf"]` for `"key_2"`. The user will get `PinnableAttributeGroups` for each key, and `PinnableAttributeGroups` gives a list of `PinnableAttributeGroup`s where the user can find column family and corresponding `PinnableWideColumns` and the `Status`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11925
Test Plan:
- `DBWideBasicTest::MultiCFMultiGetEntityAsPinnableAttributeGroups` added
will enable this new API in the `db_stress` in a separate PR
Reviewed By: ltamasi
Differential Revision: D50017414
Pulled By: jaykorean
fbshipit-source-id: 643611d1273c574bc81b94c6f5aeea24b40c4586
Summary:
We saw the following TSAN stress test failure:
```
WARNING: ThreadSanitizer: data race (pid=17523)
Write of size 1 at 0x7b8c000008b9 by thread T4243 (mutexes: write M0):
#0 rocksdb::ErrorHandler::RecoverFromRetryableBGIOError() fbcode/internal_repo_rocksdb/repo/db/error_handler.cc:742 (db_stress+0x95f954) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/1 std:🧵:_State_impl<std:🧵:_Invoker<std::tuple<void (rocksdb::ErrorHandler::*)(), rocksdb::ErrorHandler*>>>::_M_run() fbcode/third-party-buck/platform010/build/libgcc/include/c++/trunk/bits/invoke.h:74 (db_stress+0x95fc2b) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
https://github.com/facebook/rocksdb/issues/2 execute_native_thread_routine /home/engshare/third-party2/libgcc/11.x/src/gcc-11.x/x86_64-facebook-linux/libstdc++-v3/src/c++11/../../../.././libstdc++-v3/src/c++11/thread.cc:82:18 (libstdc++.so.6+0xdf4e4) (BuildId: 452d1cdae868baeeb2fdf1ab140f1c219bf50c6e)
Previous read of size 1 at 0x7b8c000008b9 by thread T22:
#0 rocksdb::DBImpl::SyncClosedLogs(rocksdb::JobContext*, rocksdb::VersionEdit*) fbcode/internal_repo_rocksdb/repo/db/error_handler.h:76 (db_stress+0x84f69c) (BuildId: 35795dfb86ddc9c4f20ddf08a491f24d)
```
This is due to a data race in accessing `recovery_in_prog_`. This PR fixes it by accessing `recovery_in_prog_` under db mutex before calling `SyncClosedLogs()`. I think the original PR https://github.com/facebook/rocksdb/pull/10489 intended to clear the error if it's a recovery flush. So ideally we can also just check flush reason. I plan to keep a safer change in this PR and make that change in the future if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11950
Test Plan: check future TSAN stress test results.
Reviewed By: anand1976
Differential Revision: D50242255
Pulled By: cbi42
fbshipit-source-id: 0d487948ef9546b038a34460f3bb037f6e5bfc58
Summary:
We were seeing the following stress test failures:
```LevelCompactionBuilder::PickFileToCompact(const rocksdb::autovector<std::pair<int, rocksdb::FileMetaData*> >&, bool): Assertion `!level_file.second->being_compacted' failed```
This can happen when we are picking a file to be compacted from some files marked for compaction, but that file is already being_compacted. We prevent this by always calling `ComputeCompactionScore()` after we pick a compaction and mark some files as being_compacted. However, if SetOptions() is called to disable marking certain files to be compacted, say `enable_blob_garbage_collection`, we currently just skip the relevant logic in `ComputeCompactionScore()` without clearing the existing files already marked for compaction. This PR fixes this issue by already clearing these files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11946
Test Plan: existing tests.
Reviewed By: akankshamahajan15
Differential Revision: D50232608
Pulled By: cbi42
fbshipit-source-id: 11e4fb5e9d48b0f946ad33b18f7c005f0161f496
Summary:
In follow-up to https://github.com/facebook/rocksdb/issues/11922, fix a race in functions like CreateColumnFamily and SetDBOptions where the DB reports one option setting but a different one is left in effect.
To fix, we can add an extra mutex around these rare operations. We don't want to hold the DB mutex during I/O or other slow things because of the many purposes it serves, but a mutex more limited to these cases should be fine.
I believe this would fix a write-write race in https://github.com/facebook/rocksdb/issues/10079 but not the read-write race.
Intended follow-up to this:
* Should be able to remove write thread synchronization from DBImpl::WriteOptionsFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11929
Test Plan:
Added two mini-stress style regression tests that fail with >1% probability before this change:
DBOptionsTest::SetStatsDumpPeriodSecRace
ColumnFamilyTest::CreateAndDropPeriodicRace
I haven't reproduced such an inconsistency between in-memory options and on disk latest options, but this change at least improves safety and adds a test anyway:
DBOptionsTest::SetStatsDumpPeriodSecRace
Reviewed By: ajkr
Differential Revision: D50024506
Pulled By: pdillinger
fbshipit-source-id: 1e99a9ed4d96fdcf3ac5061ec6b3cee78aecdda4
Summary:
1. Prevent a double join on a `port::Thread`
2. Ensure `recovery_in_prog_` and `bg_error_` are both set under same lock hold. This is useful for writers who see a non-OK `bg_error_` and are deciding whether to stall based on whether the error will be auto-recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11939
Reviewed By: cbi42
Differential Revision: D50155484
Pulled By: ajkr
fbshipit-source-id: fbc1f85c50e7eaee27ee0e376aee688d8a06c93b
Summary:
cbi42 pointed out a race condition in which `recovery_io_error_` and `recovery_error_` could be updated inconsistently due to releasing the DB mutex in `EventHelpers::NotifyOnBackgroundError()`. There doesn't seem to be a point to having two status objects, so this PR consolidates them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11937
Reviewed By: cbi42
Differential Revision: D50105793
Pulled By: ajkr
fbshipit-source-id: 3de95baccfa44351a49a5c2aa0986c9bc81baa8f
Summary:
Relaxed the constraints for blocking when writes are stopped. When a recovery is already being attempted, we might as well let `!no_slowdown` writes wait on it in case it succeeds. This makes the user-visible behavior consistent across recovery flush and non-recovery flush.
This enables `db_stress` to inject retryable (soft) flush read errors without having to handle user write failures. I changed `db_stress` a bit to permit injected errors in much more foreground operations as more admin operations (like `GetLiveFiles()`) can fail on a retryable error during flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11879
Reviewed By: anand1976
Differential Revision: D49571196
Pulled By: ajkr
fbshipit-source-id: 5d516d6faf20d2c6bfe0594ab4f2706bca6d69b0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11930
The patch cleans up and refactors the logic in/around `WriteBatchWithIndexInternal` a bit as groundwork for further changes. Specifically, the class is turned back into a stateless collection of static helpers (which is the way it was before PR 6851). Note that there were two apparent reasons for introducing this instance state in PR 6851: a) encapsulating `MergeContext` and b) resolving objects like `Logger` and `Statistics` based on a variety of handles. However, neither reason seems justified at this point. Regarding a), the `MultiGetFromBatchAndDB` logic passes in its own `MergeContext` objects via a second set of methods that do not use the member `MergeContext`. As for b), `Logger` and friends are only needed for Merge, which is only supported if a column family handle is provided; in turn, the column family handle enables us to resolve all the necessary objects without the need for any other handles like `DB` or `DBOptions`. In addition to the above, the patch changes the type of `BaseDeltaIterator::merge_result_` to `std::string` from `PinnableSlice` (since no pinning is ever done) and makes some other small code quality improvements.
Reviewed By: jaykorean
Differential Revision: D50038302
fbshipit-source-id: 5f34abe2e808bdaea0f3a8033b5764ebd446b85d
Summary:
This change has two primary goals (follow-up to https://github.com/facebook/rocksdb/issues/11917, https://github.com/facebook/rocksdb/issues/11920):
* Ensure the DB seqno_to_time_mapping has entries that allow us to put a good time lower bound on any writes that happen after setting up preserve/preclude options (either in a new DB, new CF, SetOptions, etc.) and haven't yet aged out of that time window. This allows us to remove a bunch of work-arounds in tests.
* For new DBs using preserve/preclude options, automatically reserve some sequence numbers and pre-map them to cover the time span back to the preserve/preclude cut-off time. In the future, this will allow us to import data from another DB by key, value, and write time by assigning an appropriate seqno in this DB for that write time.
Note that the pre-population (historical mappings) does not happen if the original options at DB Open time do not have preserve/preclude, so it is recommended to create initial column families at that time with create_missing_column_families, to take advantage of this (future) feature. (Adding these historical mappings after DB Open would risk non-monotonic seqno_to_time_mapping, which is dubious if not dangerous.)
Recommended follow-up:
* Solve existing race conditions (not memory safety) where parallel operations like CreateColumnFamily or SetDBOptions could leave the wrong setting in effect.
* Make SeqnoToTimeMapping more gracefully handle a possible case in which too many mappings are added for the time range of concern. It seems like there could be cases where data is massively excluded from the cold tier because of entries falling off the front of the mapping list (causing GetProximalSeqnoBeforeTime() to return 0). (More investigation needed.)
No release note for the minor bug fix because this is still an experimental feature with limited usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11922
Test Plan: tests added / updated
Reviewed By: jowlyzhang
Differential Revision: D49956563
Pulled By: pdillinger
fbshipit-source-id: 92beb918c3a298fae9ca8e509717b1067caa1519
Summary:
In preparing some seqno_to_time_mapping improvements, I found that some of the wrap-up work for creating column families was unnecessarily repeated in the case of DB::Open with create_missing_column_families. This change fixes that (`CreateColumnFamily()` -> `CreateColumnFamilyImpl()` in `DBImpl::Open()`), motivated by avoiding repeated calls to `RegisterRecordSeqnoTimeWorker()` but with the side benefit of avoiding repeated calls to `WriteOptionsFile()` for each CF.
Also in this change:
* Add a `Status::UpdateIfOk()` function for combining statuses in a common pattern
* Rename `max_time_duration` -> `min_preserve_seconds` (include units as much as possible)
* Improved comments in several places
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11920
Test Plan: tests added / updated
Reviewed By: jaykorean
Differential Revision: D49919147
Pulled By: pdillinger
fbshipit-source-id: 3d0318c1d070c842c5331da0a5b415caedc104f1
Summary:
1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.`
**Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator.
2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset`
**Fix** - Remove prefetch_buffer to be used when uncompressed dict is read.
3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed.
Received signal 6 (Aborted)
Invoking GDB for stack trace...
db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed`
**Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884
Test Plan: Ran various flavors of crash tests locally for the whole duration
Reviewed By: anand1976
Differential Revision: D49834201
Pulled By: akankshamahajan15
fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
Summary:
Since allowing 24hr peak by setting start_time = end_time is not so intuitive, we are not going to allow it (e.g. `00:00-00:00` doesn't looks like a value that would cover 24hr.). Instead, we are going to compare at minute level (i.e. dropping the seconds to the nearest minute) so that `00:00-23:59` will cover 24hrs. The entire minute from 23:59:00 23:59:59 will be covered with this change.
Minor fixes from previous PR
- release build error
- fixed random seed in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11911
Test Plan:
`DBOptionsTest::OffPeakTimes`
`make -j64 static_lib` to test release build issue that was fixed
Reviewed By: pdillinger
Differential Revision: D49787795
Pulled By: jaykorean
fbshipit-source-id: e8d045b95f54f61d5dd5f1bb473579f8d55c18b3
Summary:
Recovery triggers flushes for very different scenarios:
(1) `FlushReason::kErrorRecoveryRetryFlush`: a flush failed
(2) `FlushReason::kErrorRecovery`: a WAL may be corrupted
(3) `FlushReason::kCatchUpAfterErrorRecovery`: immutable memtables may have accumulated
The old code called called `FlushAllColumnFamilies()` in all cases, which uses manual flush functions: `AtomicFlushMemTables()` and `FlushMemTable()`. Forcing flushing the latest data on all CFs was useful for (2) because it ensures all CFs move past the corrupted WAL.
However, those code paths were overkill for (1) and (3), where only already-immutable memtables need to be flushed. There were conditionals to exclude some of the extraneous logic but I found there was still too much happening. For example, both of the manual flush functions enter the write thread. Entering the write thread is inconvenient because then we can't allow stalled writes to wait on a retrying flush to finish.
Instead of continuing down the path of adding more conditionals to the manual flush functions, this PR introduces a dedicated function for cases (1) and (3): `RetryFlushesForErrorRecovery()`. Also I cleaned up the manual flush functions to remove existing conditionals for these cases as they're no longer needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11903
Reviewed By: cbi42
Differential Revision: D49693812
Pulled By: ajkr
fbshipit-source-id: 7630ac539b9d6c92052c13a3cdce53256134d990
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11913
The `max_successive_merges` logic currently does not handle wide-column base values correctly, since it uses the `Get` API, which only returns the value of the default column. The patch fixes this by switching to `GetEntity` and passing all columns (if applicable) to the merge operator.
Reviewed By: jaykorean
Differential Revision: D49795097
fbshipit-source-id: 75eb7cc9476226255062cdb3d43ab6bd1cc2faa3
Summary:
After https://github.com/facebook/rocksdb/issues/11905, I am preparing a DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping. **Intended follow-up**
However, there are a number of test changes I want to make prior to that to make it clear that I am not regressing the tests and production behavior at the same time.
* Start mock time in the tests well beyond epoch (time 0) so that we aren't normally reaching into pre-history for current time minus the preserve/preclude duration.
* Majorly clean up BasicSeqnoToTimeMapping to avoid confusing hard-coded bounds on GetProximalTimeBeforeSeqno() results.
* There is an unresolved/unexplained issue marked with FIXME that should be investigated when GetProximalTimeBeforeSeqno() is put into production.
* MultiCFs test was strangely generating 5 L0 files, four of which would be compacted into an L1, and then letting TTL compaction compact 1@L0+1@L1. Changing the starting time of the tests seemed to mess up the TTL compaction. But I suspect the TTL compaction was unintentional, so I've cut it down to just 4 L0 files, which compacts predictably.
* Unrelated: allow ROCKSDB_NO_STACK=1 to skip printing a stack trace on assertion failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11917
Test Plan: no changes to production code
Reviewed By: jowlyzhang
Differential Revision: D49841436
Pulled By: pdillinger
fbshipit-source-id: 753348ace9c548e82bcb77fcc8b2ffb7a6beeb0a
Summary:
Missed `GetFileSize()` forwarding , this PR fix this issue, and mark `WritableFile::GetFileSize()` as pure virtual to detect such issue in compile time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11726
Reviewed By: ajkr
Differential Revision: D49791240
Pulled By: jowlyzhang
fbshipit-source-id: ef219508d6b15c9a24df9b706a9fdc33cc6a286e
Summary:
RocksDB's primary function is to facilitate read and write operations. Compactions, while essential for minimizing read amplifications and optimizing storage, can sometimes compete with these primary tasks. Especially during periods of high read/write traffic, it's vital to ensure that primary operations receive priority, avoiding any potential disruptions or slowdowns. Conversely, during off-peak times when traffic is minimal, it's an opportune moment to tackle low-priority tasks like TTL based compactions, optimizing resource usage.
In this PR, we are incorporating the concept of off-peak time into RocksDB by introducing `daily_offpeak_time_utc` within the DBOptions. This setting is formatted as "HH:mm-HH:mm" where the first one before "-" is the start time and the second one is the end time, inclusive. It will be later used for resource optimization in subsequent PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11893
Test Plan:
- New Unit Test Added - `DBOptionsTest::OffPeakTimes`
- Existing Unit Test Updated - `OptionsTest`, `OptionsSettableTest`
Reviewed By: pdillinger
Differential Revision: D49714553
Pulled By: jaykorean
fbshipit-source-id: fef51ea7c0fede6431c715bff116ddbb567c8752
Summary:
This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up**
However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping.
Functional fixes / changes:
* This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc
* That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.)
* Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function.
* Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples.
Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work.
An apparent compaction bug is revealed in
PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909
Cosmetic / code safety things (not exhaustive):
* Fix some confusing names.
* `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name.
* Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing.
* Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions.
* Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind.
* (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.)
* A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`).
* Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905
Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others.
Reviewed By: jowlyzhang
Differential Revision: D49755592
Pulled By: pdillinger
fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11896
The patch extends the test coverage of the wide column aware merge logic by adding two new tests that perform general transformations during merge by implementing the `FullMergeV3` interface. The first one uses a merge operator that produces a wide-column entity as result in all cases (i.e. even if the base value is a plain key-value, or if there is no base value). The second one uses a merge operator that results in a plain key-value in all cases.
Reviewed By: jaykorean
Differential Revision: D49665946
fbshipit-source-id: 419b9e557c064525b659685eb8c09ae446656439
Summary:
Make the `RecoverFromRetryableBGIOError` function always mark `recovery_in_prog_` to false when it returns.
Otherwise, in below code snippet, when db closes and the `error_handler_.CancelErrorRecovery()` call successfully joined the recovery thread, the immediately following while loop will incorrectly think the error recovery is still in progress and loops in `bg_cv_.Wait()`.
1c871a4d86/db/db_impl/db_impl.cc (L542-L545)
This is the issue https://github.com/facebook/rocksdb/issues/11440
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11890
Reviewed By: anand1976
Differential Revision: D49624216
Pulled By: jowlyzhang
fbshipit-source-id: ee10cf6527d95b8dd4705a326eb6208d741fe002
Summary:
https://github.com/facebook/rocksdb/issues/11872 causes a unit test to start failing with the error message below. The cause is that the additional call to `FlushAllColumnFamilies()` in `DBImpl::ResumeImpl()` can run while DB is closing. More detailed explanation: there are two places where we call `ResumeImpl()`:
1. in `ErrorHandler::RecoverFromBGError`, for manual resume or recovery from errors like OutOfSpace through sst file manager, and
2. in `Errorhandler::RecoverFromRetryableBGIOError`, for error recovery from errors like flush failure due to retryable IOError. This is tracked by `ErrorHandler::recovery_thread_`.
Here is how DB close waits for error recovery: 49da91ec09/db/db_impl/db_impl.cc (L540-L543)
`CancelErrorRecovery()` waits until `recovery_thread_` finishes and `IsRecoveryInProgress()` checks the `recovery_in_prog_` flag. The additional call to `FlushAllColumnFamilies()` in `ResumeImpl()` happens after it clears bg error and the `recovery_in_prog_` flag: 49da91ec09/db/db_impl/db_impl.cc (L436-L463). So if `ResumeImpl()` is called in `RecoverFromBGError()`, we can have a thread running `FlushAllColumnFamilies()` while DB is closing and thought that recovery is done.
The fix is to only do the additional call to `FlushAllColumnFamilies()` when doing error recovery through `Errorhandler::RecoverFromRetryableBGIOError` by setting flags in `DBRecoverContext`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11880
Test Plan:
`gtest-parallel --repeat=100 --workers=4 ./error_handler_fs_test --gtest_filter="*AutoRecoverFlushError*"` reproduces the error pretty reliably.
```[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBErrorHandlingFSTest
[ RUN ] DBErrorHandlingFSTest.AutoRecoverFlushError
error_handler_fs_test: db/column_family.cc:1618: rocksdb::ColumnFamilySet::~ColumnFamilySet(): Assertion `last_ref' failed.
Received signal 6 (Aborted)
...
https://github.com/facebook/rocksdb/issues/10 0x00007fac4409efd6 in __GI___assert_fail (assertion=0x7fac452c0afa "last_ref", file=0x7fac452c9fb5 "db/column_family.cc", line=1618, function=0x7fac452cb950 "rocksdb::ColumnFamilySet::~ColumnFamilySet()") at assert.c:101
101 in assert.c
https://github.com/facebook/rocksdb/issues/11 0x00007fac44b5324f in rocksdb::ColumnFamilySet::~ColumnFamilySet (this=0x7b5400000000) at db/column_family.cc:1618
1618 assert(last_ref);
https://github.com/facebook/rocksdb/issues/12 0x00007fac44e0f047 in std::default_delete<rocksdb::ColumnFamilySet>::operator() (this=0x7b5800000940, __ptr=0x7b5400000000) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/13 std::__uniq_ptr_impl<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/14 std::unique_ptr<rocksdb::ColumnFamilySet, std::default_delete<rocksdb::ColumnFamilySet> >::reset (this=0x7b5800000940, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/15 rocksdb::VersionSet::~VersionSet (this=this@entry=0x7b5800000900) at db/version_set.cc:5081
5081 column_family_set_.reset();
https://github.com/facebook/rocksdb/issues/16 0x00007fac44e0f97a in rocksdb::VersionSet::~VersionSet (this=0x7b5800000900) at db/version_set.cc:5078
5078 VersionSet::~VersionSet() {
https://github.com/facebook/rocksdb/issues/17 0x00007fac44bf0b2f in std::default_delete<rocksdb::VersionSet>::operator() (this=0x7b8c00000068, __ptr=0x7b5800000900) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:85
85 delete __ptr;
https://github.com/facebook/rocksdb/issues/18 std::__uniq_ptr_impl<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:182
182 _M_deleter()(__old_p);
https://github.com/facebook/rocksdb/issues/19 std::unique_ptr<rocksdb::VersionSet, std::default_delete<rocksdb::VersionSet> >::reset (this=0x7b8c00000068, __p=0x0) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/unique_ptr.h:456
456 _M_t.reset(std::move(__p));
https://github.com/facebook/rocksdb/issues/20 rocksdb::DBImpl::CloseHelper (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:676
676 versions_.reset();
https://github.com/facebook/rocksdb/issues/21 0x00007fac44bf1346 in rocksdb::DBImpl::CloseImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:720
720 Status DBImpl::CloseImpl() { return CloseHelper(); }
https://github.com/facebook/rocksdb/issues/22 rocksdb::DBImpl::~DBImpl (this=this@entry=0x7b8c00000000) at db/db_impl/db_impl.cc:738
738 closing_status_ = CloseImpl();
https://github.com/facebook/rocksdb/issues/23 0x00007fac44bf2bba in rocksdb::DBImpl::~DBImpl (this=0x7b8c00000000) at db/db_impl/db_impl.cc:722
722 DBImpl::~DBImpl() {
https://github.com/facebook/rocksdb/issues/24 0x00007fac455444d4 in rocksdb::DBTestBase::Close (this=this@entry=0x7b6c00000000) at db/db_test_util.cc:678
678 delete db_;
https://github.com/facebook/rocksdb/issues/25 0x00007fac455455fb in rocksdb::DBTestBase::TryReopen (this=this@entry=0x7b6c00000000, options=...) at db/db_test_util.cc:707
707 Close();
https://github.com/facebook/rocksdb/issues/26 0x00007fac45543459 in rocksdb::DBTestBase::Reopen (this=0x7ffed74b79a0, options=...) at db/db_test_util.cc:670
670 ASSERT_OK(TryReopen(options));
https://github.com/facebook/rocksdb/issues/27 0x00000000004f2522 in rocksdb::DBErrorHandlingFSTest_AutoRecoverFlushError_Test::TestBody (this=this@entry=0x7b6c00000000) at db/error_handler_fs_test.cc:1224
1224 Reopen(options);
```
Reviewed By: jowlyzhang
Differential Revision: D49579701
Pulled By: cbi42
fbshipit-source-id: 3fc8325e6dde7e7faa8bcad95060cb4e26eda638
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable: 269478ee46/db/db_impl/db_impl_compaction_flush.cc (L725) This prevents any future flush to pick old memtables.
A more detailed repro is in unit test.
This PR fixes this issue by
1. Ensure we rollback memtables if an atomic flush fails due to background error
2. When there is a background error, abort atomic flushes that are waiting for older memtables to be installed
3. Do not schedule non-recovery flushes when there is a background error that stops background work
There was another issue with atomic_flush=true where DB can hang during DB close, see more in #11867. The fix in this PR, specifically fix 2 above, should be enough to resolve it too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11872
Test Plan: new unit test.
Reviewed By: jowlyzhang
Differential Revision: D49556867
Pulled By: cbi42
fbshipit-source-id: 4a0210ff28a8552a99ece7fbb0f574fd24b4da3f
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11870
Having a large number of merge operands applied at query time can have a significant effect on performance; therefore, applications might want limit the number of deltas for any given key. However, there is currently no way to establish the number of operands for certain types of queries. The ticker `READ_NUM_MERGE_OPERANDS` only provides aggregate (not per-read) information. The `PerfContext` counters `internal_merge_count` and `internal_merge_point_lookup_count` can be used to get this information on a per-query basis for iterators and single point lookups; however, there is no per-key breakdown for `MultiGet` type APIs. The patch addresses this issue by introducing a special kind of OK status which signals that an application-defined threshold on the number of merge operands has been exceeded for a given key. The threshold can be specified on a per-query basis using a new field in `ReadOptions`.
Reviewed By: jaykorean
Differential Revision: D49522786
fbshipit-source-id: 4265b3848d1be5ff313a3e8fb604ddf56411dd2c
Summary:
This PR implements support for a three tier cache - primary block cache, compressed secondary cache, and a nvm (local flash) secondary cache. This allows more effective utilization of the nvm cache, and minimizes the number of reads from local flash by caching compressed blocks in the compressed secondary cache.
The basic design is as follows -
1. A new secondary cache implementation, ```TieredSecondaryCache```, is introduced. It keeps the compressed and nvm secondary caches and manages the movement of blocks between them and the primary block cache. To setup a three tier cache, we allocate a ```CacheWithSecondaryAdapter```, with a ```TieredSecondaryCache``` instance as the secondary cache.
2. The table reader passes both the uncompressed and compressed block to ```FullTypedCacheInterface::InsertFull```, allowing the block cache to optionally store the compressed block.
3. When there's a miss, the block object is constructed and inserted in the primary cache, and the compressed block is inserted into the nvm cache by calling ```InsertSaved```. This avoids the overhead of recompressing the block, as well as avoiding putting more memory pressure on the compressed secondary cache.
4. When there's a hit in the nvm cache, we attempt to insert the block in the compressed secondary cache and the primary cache, subject to the admission policy of those caches (i.e admit on second access). Blocks/items evicted from any tier are simply discarded.
We can easily implement additional admission policies if desired.
Todo (In a subsequent PR):
1. Add to db_bench and run benchmarks
2. Add to db_stress
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11812
Reviewed By: pdillinger
Differential Revision: D49461842
Pulled By: anand1976
fbshipit-source-id: b40ac1330ef7cd8c12efa0a3ca75128e602e3a0b
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status: f42e70bf56/db/db_impl/db_impl_compaction_flush.cc (L3161)
This PR fixes the issue by rollback these pending flushes.
There is another issue where if a new flush for new memtable starts and finishes after Flush0 finishes. Its output may also be deleted (see more in unit test). It is fixed by checking bg error status before installing a memtable result, and rollback if there is an error.
There is a more efficient fix where we just don't release the pending file output number for flushes that delegate installation. It is more efficient since it does not have to rewrite the flush output file. With the fix in this PR, we can end up with a giant file if a lot of memtables are being flushed together. However, the more efficient fix is a bit more complicated to implement (requires associating such pending file numbers with flush job/memtables) and is more risky since it changes normal flush code path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11865
Test Plan: * Added repro unit tests.
Reviewed By: anand1976
Differential Revision: D49484922
Pulled By: cbi42
fbshipit-source-id: 25b536c08f4e02e7f1d0f86571663737d2b5d53d
Summary:
To fix off-by-one error: Transaction could not check for conflicts for operation at SequenceNumber 500000 as the MemTable only contains changes newer than SequenceNumber 500001.
Fixes https://github.com/facebook/rocksdb/issues/11822
I think introduced in a657ee9a9c
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11861
Reviewed By: pdillinger
Differential Revision: D49457273
Pulled By: ajkr
fbshipit-source-id: b527cbae4ecc7874633a11f07027adee62940d74
Summary:
**Context:**
As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`.
**Summary:**
This PR contains two commits:
(1) [Refactory](0012777f0e) to make resonating/using what is in `Compaction:: table_properties_` easier
- Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_`
- Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties`
- Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other
(2) [Expose more info about input files:](6093e7dfba) `CompactionFilter::Context::input_start_level/input_table_properties`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857
Test Plan:
- Modify existing UT `
TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics
Reviewed By: ajkr
Differential Revision: D49402540
Pulled By: hx235
fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
Summary:
**Summary:**
When row cache hits and a timestamp is being set in read_options, even though ROW_CACHE entry is hit, the return status is kNotFound.
**Cause of error:**
If timestamp is provided in readoptions, a callback for sequence number checking is registered [here](8fc78a3a9e/db/db_impl/db_impl.cc (L2112)).
Hence the default value set at this [line](694e49cbb1/table/get_context.cc (L611)) prevents get_context from saving value found in cache. Causing the final status to be kNotFound even though the entry exist in both cache and SST file.
**Proposed Solution**
Row cache key contains a sequence number in it. If the key for row cache lookup matches the key in cache, this cache entry should be good to be exposed to user and hence we reuse the sequence number in cache key rather than passing kMaxSequenceNumber.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11816
Reviewed By: ajkr
Differential Revision: D49419029
Pulled By: jowlyzhang
fbshipit-source-id: 6c77e9e751628d7d8e6c389f299e29a11ea824c6
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11858
The patch builds on https://github.com/facebook/rocksdb/pull/11807 and integrates the `FullMergeV3` API into the read and compaction code paths by updating and extending the logic in `MergeHelper`.
In particular, when it comes to merge inputs, the existing `TimedFullMergeWithEntity` is folded into `TimedFullMerge`, since wide-column base values are now handled the same way as plain base values (or no base values for that matter), e.g. they are passed directly to the `MergeOperator`. On the other hand, there is some new differentiation on the output side. Namely, there are now two sets of `TimedFullMerge` variants: one set for contexts where the complete merge result and its value type are needed (used by iterators and compactions), and another set where the merge result is needed in a form determined by the client (used by the point lookup APIs, where e.g. for `Get` we have to extract the value of the default column of any wide-column results).
Implementation-wise, the two sets of overloads use different visitors to process the `std::variant` produced by `FullMergeV3`. This has the benefit of eliminating some repeated code e.g. in the point lookup paths, since `TimedFullMerge` now populates the application's result object (`PinnableSlice`/`string` or `PinnableWideColumns`) directly. Moreover, within each set of variants, there is a separate overload for the no base value/plain base value/wide-column base value cases, which eliminates some repeated branching w/r/t to the type of the base value if any.
Reviewed By: jaykorean
Differential Revision: D49352562
fbshipit-source-id: c2fb9853dba3fbbc6918665bde4195c4ea150a0c
Summary:
Fixes https://github.com/facebook/rocksdb/issues/10257 (also see [here](https://github.com/facebook/rocksdb/pull/10355#issuecomment-1684308556)) by releasing compaction files earlier when writing to manifest in LogAndApply(). This is done by passing in a [callback](ba59751430/db/version_set.h (L1199)) to LogAndApply(). The new Version is created in the same critical section where compaction files are released. When compaction picker is picking compaction based on the new version, these compaction files will already be released.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11764
Test Plan:
* Existing unit tests
* A repro unit test to validate that compaction files are released: `./db_compaction_test --gtest_filter=DBCompactionTest.ReleaseCompactionDuringManifestWrite`
* `python3 ./tools/db_crashtest.py --simple whitebox` with some assertions to check compaction files are released
Reviewed By: ajkr
Differential Revision: D48742152
Pulled By: cbi42
fbshipit-source-id: 7560fd0e723a63fe692234015d2b96850f8b5d77
Summary:
When skip_memtable is true in MultiGetImpl, The lookup_current is always false, Causes data to be unable to be queried in super_version->current。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11700
Reviewed By: anand1976
Differential Revision: D49342877
Pulled By: jowlyzhang
fbshipit-source-id: 270a36d049b4cb7fd151a1fa3080300310111271
Summary:
An internal user wants to be able to dynamically switch between Bloom and Ribbon filters, without a custom FilterPolicy. Making `filter_policy` mutable would actually make issue https://github.com/facebook/rocksdb/issues/10079 worse, because it would be a race on a pointer field, not just on scalars.
As a reasonable compromise until that is fixed, I am enabling dynamic control over Bloom vs. Ribbon choice by making
RibbonFilterPolicy::bloom_before_level mutable, and doing that safely by using an atomic.
I've also slightly tweaked the interpretation of that field so that setting it to INT_MAX really means "always Bloom."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11838
Test Plan: unit tests added/extended. crash test updated for SetOptions call and tested under TSAN with amplified probability (lower set_options_one_in).
Reviewed By: ajkr
Differential Revision: D49296284
Pulled By: pdillinger
fbshipit-source-id: e4251c077510df9a9c719876f482448c0d15402a
Summary:
- As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`.
## Minor Refactor
- Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`.
- I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842
Test Plan:
- Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing.
```
python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10
```
Reviewed By: ltamasi
Differential Revision: D49329575
Pulled By: jaykorean
fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
Summary:
This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically.
The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`.
This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594
Test Plan:
* New unit tests.
* Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case.
TODO in a following PR:
* Stress test Iterator::Refresh() to different snapshots or no snapshot.
Reviewed By: ajkr
Differential Revision: D48456896
Pulled By: cbi42
fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
Summary:
When `MultiGet` acquires `SuperVersion` via locking the db mutex and get the current `ColumnFamilyData::super_version_`, its corresponding cleanup logic is not correctly done.
It's currently doing this:
`MultiGetColumnFamilyData::cfd->GetSuperVersion().Unref()`
This operates on the most recent `SuperVersion` without locking db mutex , which is not thread safe by itself. And this unref operation is intended for the originally acquired `SuperVersion` instead of the current one. Because a race condition could happen where a new `SuperVersion` is installed in between this `MultiGet`'s ref and unref. When this race condition does happen, it's not sufficient to just unref the `SuperVersion`, `DBImpl::CleanupSuperVersion` should be called instead to properly clean up the `SuperVersion` had this `MultiGet` call be its last reference holder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11830
Test Plan:
`make all check`
Added a unit test that would originally fail
Reviewed By: ltamasi
Differential Revision: D49287715
Pulled By: jowlyzhang
fbshipit-source-id: 8353636ee11b2e90d85c677a96a92360072644b0
Summary:
`GetEntity` API support for ReadOnly DB and Secondary DB.
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`)
- Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity`
- `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally.
- `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()`
- Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`.
- Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799
Test Plan:
**Unit Tests**
- Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup.
- Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()`
- `make -j64 check`
**Crash Tests**
- `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
- `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 `
- `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter
val=10`
Reviewed By: ltamasi
Differential Revision: D49037040
Pulled By: jaykorean
fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b
Summary:
When executing ClipColumnFamily, if end_key is equal to largest_user_key in a file, this key will not be deleted. So we need to change less than to less than or equal to
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11811
Reviewed By: ajkr
Differential Revision: D49206936
Pulled By: cbi42
fbshipit-source-id: 3e8bcb7b52040a9b4d1176de727616cc298d3445
Summary:
`last_stats_dump_time_microsec_` is not used after initialization.
I guess that it was previously used to implement periodically dumping stats,
but this functionality has now been delegated to the `PeriodicTaskScheduler`.
4b79e8c003/db/db_impl/db_impl.cc (L770-L778)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11824
Reviewed By: cbi42
Differential Revision: D49278311
Pulled By: jowlyzhang
fbshipit-source-id: 5856245580afc026e6b490755a45c5436a2375c9
Summary:
As discussed in https://github.com/facebook/rocksdb/issues/11730 , this PR tracks the effective `full_history_ts_low` per SuperVersion and update existing sanity checks for `ReadOptions.timestamp >= full_history_ts_low` to use this per SuperVersion `full_history_ts_low` instead. This also means the check is moved to happen after acquiring SuperVersion.
There are two motivations for this: 1) Each time `full_history_ts_low` really come into effect to collapse history, a new SuperVersion is always installed, because it would involve either a Flush or Compaction, both of which change the LSM tree shape. We can take advantage of this to ensure that as long as this sanity check is passed, even if `full_history_ts_low` can be concurrently increased and collapse some history above the requested `ReadOptions.timestamp`, a read request won’t have visibility to that part of history through this SuperVersion that it already acquired. 2) the existing sanity check uses `ColumnFamilyData::GetFullHistoryTsLow` without locking the db mutex, which is the mutex all `IncreaseFullHistoryTsLow` operation is using when mutating this field. So there is a race condition. This also solve the race condition on the read path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11784
Test Plan:
`make all check`
// Checks success scenario really provide the read consistency attribute as mentioned above.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckPassReadIsConsistent*`
// Checks failure scenario cleans up SuperVersion properly.
`./db_with_timestamp_basic_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_secondary_test --gtest_filter=*FullHistoryTsLowSanityCheckFail*`
`./db_readonly_with_timestamp_test --gtest_filter=*FullHistoryTsLowSanitchCheckFail*`
Reviewed By: ltamasi
Differential Revision: D48894795
Pulled By: jowlyzhang
fbshipit-source-id: 1f801fe8e1bc8e63ca76c03cbdbd0974e5ff5bf6
Summary:
**Context/Summary:**
A size amp compaction can select and prevent a large number of L0 files from being selected by other compaction. If such compaction is running long or being queued behind, these L0 files will exist for long. With a few more flushes, we can run into write stop triggered by # L0 files. We've seen this happen on a host with many DBs sharing same thread pool, each of these DBs submits a size amp compaction with (110-180)+ files to the pool upon reopen and with a few more flushes, they hit the 200 L0 write stop condition.
The idea is to exclude some L0 input files in size amp compaction that are harmless to size amp reduction but improve the situation described above.
The exclusion algorithm is in `MightExcludeNewL0sToReduceWriteStop()` with two elements:
1. #L0 to exclude + (level0_stop_writes_trigger - num_l0_input_pre_exclusion) should be in the range of [min_merge_width, max_merge_width].
- This is to ensure we are excluding enough L0 input files but not too many to be qualified to picked for another compaction along with the incoming future L0 files before write stop.
2. Based on (1), further constrain #L0 to exclude based on the post-exclusion compaction score. The goal is to ensure our exclusion will not disqualify the size amp compaction from being a size amp compaction after exclusion.
**Tets plan:** New unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11749
Reviewed By: ajkr
Differential Revision: D48850631
Pulled By: hx235
fbshipit-source-id: 2c321036e164087c36319dd5645cbbf6b6152092
Summary:
Existing compaction statistics are `COMPACTION_TIME` and `COMPACTION_CPU_TIME` which are histogram and are logged at the end of a compaction. The new statistics `COMPACTION_CPU_TOTAL_TIME` is for cumulative total compaction time which is updated regularly during a compaction. This allows user to more closely track compaction cpu usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11741
Test Plan: * new unit test `DBTestWithParam.CompactionTotalTimeTest`
Reviewed By: ajkr
Differential Revision: D48608094
Pulled By: cbi42
fbshipit-source-id: b597109f3e4bf2237fb5a216b6fd036e5363b4c0
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11823
Similarly to https://github.com/facebook/rocksdb/pull/11813, the patch is a small refactoring that eliminates some copy-paste around sorting the columns of entities by column name.
Reviewed By: jaykorean
Differential Revision: D49195504
fbshipit-source-id: d48c9f290e3203f838cc5949856c469ecf730008
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11807
For now, RocksDB has limited support for using merge with wide columns: when a bunch of merge operands have to be applied to a wide-column base value, RocksDB currently passes only the value of the default column to the application's `MergeOperator`, which means there is no way to update any other columns during a merge. As a first step in making this more general, the patch adds a new API `FullMergeV3` to `MergeOperator`.
`FullMergeV3`'s interface enables applications to receive a plain, wide-column, or non-existent base value as merge input, and to produce a new plain value, a new wide-column value, or an existing operand as merge output. Note that there are no limitations on the column names and values if the merge result is a wide-column entity. Also, the interface is general in the sense that it makes it possible e.g. for a merge that takes a plain base value and some deltas to produce a wide-column entity as a result.
For backward compatibility, the default implementation of `FullMergeV3` falls back to `FullMergeV2` and implements the current logic where merge operands are applied to the default column of the base entity and any other columns are unchanged. (Note that with `FullMergeV3` in the `MergeOperator` interface, this behavior will become customizable.)
This patch just introduces the new API and the default backward compatible implementation. I plan to integrate `FullMergeV3` into the query and compaction logic in subsequent diffs.
Reviewed By: jaykorean
Differential Revision: D49117253
fbshipit-source-id: 109e016f25cd130fc504790818d927bae7fec6bd
Summary:
Tests a scenario where range tombstone reseek used to cause MergingIterator to discard non-ok status.
Ran on main without https://github.com/facebook/rocksdb/issues/11786:
```
./db_range_del_test --gtest_filter="*RangeDelReseekAfterFileReadError*"
Note: Google Test filter = *RangeDelReseekAfterFileReadError*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBRangeDelTest
[ RUN ] DBRangeDelTest.RangeDelReseekAfterFileReadError
db/db_range_del_test.cc:3577: Failure
Value of: iter->Valid()
Actual: true
Expected: false
[ FAILED ] DBRangeDelTest.RangeDelReseekAfterFileReadError (64 ms)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11790
Reviewed By: ajkr
Differential Revision: D48972869
Pulled By: cbi42
fbshipit-source-id: b1a71867533b0fb60af86f8ce8a9e391ba84dd57
Summary:
Some repro unit tests for the bug fixed in https://github.com/facebook/rocksdb/pull/11782.
Ran on main without https://github.com/facebook/rocksdb/pull/11782:
```
./db_compaction_test --gtest_filter='*ErrorWhenReadFileHead'
Note: Google Test filter = *ErrorWhenReadFileHead
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.ErrorWhenReadFileHead
db/db_compaction_test.cc:10105: Failure
Value of: s.IsIOError()
Actual: false
Expected: true
[ FAILED ] DBCompactionTest.ErrorWhenReadFileHead (3960 ms)
./db_iterator_test --gtest_filter="*ErrorWhenReadFile*"
Note: Google Test filter = *ErrorWhenReadFile*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBIteratorTest
[ RUN ] DBIteratorTest.ErrorWhenReadFile
db/db_iterator_test.cc:3399: Failure
Value of: (iter->status()).ok()
Actual: true
Expected: false
[ FAILED ] DBIteratorTest.ErrorWhenReadFile (280 ms)
[----------] 1 test from DBIteratorTest (280 ms total)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11788
Reviewed By: ajkr
Differential Revision: D48940284
Pulled By: cbi42
fbshipit-source-id: 06f3c5963f576db3f85d305ffb2745ee13d209bb
Summary:
**Context/Summary:**
After https://github.com/facebook/rocksdb/pull/11631, we rely on `compaction_readahead_size` for how much to read ahead for compaction read under non-direct IO case. https://github.com/facebook/rocksdb/pull/11658 therefore also sanitized 0 `compaction_readahead_size` to 2MB under non-direct IO, which is consistent with the existing sanitization with direct IO.
However, this makes disabling compaction readahead impossible as well as add one more scenario to the inconsistent effects between `Options.compaction_readahead_size=0` during DB open and `SetDBOptions("compaction_readahead_size", "0")` .
- `SetDBOptions("compaction_readahead_size", "0")` will disable compaction readahead as its logic never goes through sanitization above while `Options.compaction_readahead_size=0` will go through sanitization.
Therefore we decided to do this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11762
Test Plan: Modified existing UTs to cover this PR
Reviewed By: ajkr
Differential Revision: D48759560
Pulled By: hx235
fbshipit-source-id: b3f85e58bda362a6fa1dc26bd8a87aa0e171af79
Summary:
For a SST file that uses user-defined timestamp aware comparators, if a lower or upper bound is set, sst_dump tool doesn't handle it well. This PR adds support for that. While working on this `MaybeAddTimestampsToRange` is moved to the udt_util.h file to be shared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11757
Test Plan:
make all check
for changes in db_impl.cc and db_impl_compaction_flush.cc
for changes in sst_file_dumper.cc, I manually tested this change handles specifying bounds for UDT use cases. It probably should have a unit test file eventually.
Reviewed By: ltamasi
Differential Revision: D48668048
Pulled By: jowlyzhang
fbshipit-source-id: 1560465f40e44668d6d82a7439fe9012be0e74a8
Summary:
wide_columns can now be pretty-printed in the following commands
- `./ldb dump_wal`
- `./ldb dump`
- `./ldb idump`
- `./ldb dump_live_files`
- `./ldb scan`
- `./sst_dump --command=scan`
There are opportunities to refactor to reduce some nearly identical code. This PR is initial change to add wide column support in `ldb` and `sst_dump` tool. More PRs to come for the refactor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11754
Test Plan:
**New Tests added**
- `WideColumnsHelperTest::DumpWideColumns`
- `WideColumnsHelperTest::DumpSliceAsWideColumns`
**Changes added to existing tests**
- `ExternalSSTFileTest::BasicMixed` added to cover mixed case (This test should have been added in https://github.com/facebook/rocksdb/issues/11688). This test does not verify the ldb or sst_dump output. This test was used to create test SST files having some rows with wide columns and some without and the generated SST files were used to manually test sst_dump_tool.
- `createSST()` in `sst_dump_test` now takes `wide_column_one_in` to add wide column value in SST
**dump_wal**
```
./ldb dump_wal --walfile=/tmp/rocksdbtest-226125/db_wide_basic_test_2675429_2308393776696827948/000004.log --print_value --header
```
```
Sequence,Count,ByteSize,Physical Offset,Key(s) : value
1,1,59,0,PUT_ENTITY(0) : 0x:0x68656C6C6F 0x617474725F6E616D6531:0x666F6F 0x617474725F6E616D6532:0x626172
2,1,34,42,PUT_ENTITY(0) : 0x617474725F6F6E65:0x74776F 0x617474725F7468726565:0x666F7572
3,1,17,7d,PUT(0) : 0x7468697264 : 0x62617A
```
**idump**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ idump
```
```
'first' seq:1, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:2, type:22 => attr_one:two attr_three:four
'third' seq:3, type:1 => baz
Internal keys in range: 3
```
**SST Dump from dump_live_files**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ compact
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ dump_live_files
```
```
...
==============================
SST Files
==============================
/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst level:1
------------------------------
Process /tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst
Sst file format: block-based
'first' seq:0, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:0, type:22 => attr_one:two attr_three:four
'third' seq:0, type:1 => baz
...
```
**dump**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ dump
```
```
first ==> :hello attr_name1:foo attr_name2:bar
second ==> attr_one:two attr_three:four
third ==> baz
Keys in range: 3
```
**scan**
```
./ldb --db=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/ scan
```
```
first : :hello attr_name1:foo attr_name2:bar
second : attr_one:two attr_three:four
third : baz
```
**sst_dump**
```
./sst_dump --file=/tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst --command=scan
```
```
options.env is 0x7ff54b296000
Process /tmp/rocksdbtest-226125/db_wide_basic_test_3481961_2308393776696827948/000013.sst
Sst file format: block-based
from [] to []
'first' seq:0, type:22 => :hello attr_name1:foo attr_name2:bar
'second' seq:0, type:22 => attr_one:two attr_three:four
'third' seq:0, type:1 => baz
```
Reviewed By: ltamasi
Differential Revision: D48837999
Pulled By: jaykorean
fbshipit-source-id: b0280f0589d2b9716bb9b50530ffcabb397d140f
Summary:
This PR adds a missing piece for the UDT in memtable only feature, which is to automatically increase `full_history_ts_low` when flush happens during recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11774
Test Plan:
Added unit test
make all check
Reviewed By: ltamasi
Differential Revision: D48799109
Pulled By: jowlyzhang
fbshipit-source-id: fd681ed66d9d40904ca2c919b2618eb692686035
Summary:
the value of `done` is always false here, so the sub-condition `!done` will always be true and the check can be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11746
Reviewed By: anand1976
Differential Revision: D48656845
Pulled By: ajkr
fbshipit-source-id: 523ba3d07b3af7880c8c8ccb20442fd7c0f49417
Summary:
The user-defined timestamps feature only enforces that for the same key, user-defined timestamps should be non-decreasing. For the user-defined timestamps in memtable only feature, during flush, we check the user-defined timestamps in each memtable to examine if the data is considered expired with regard to `full_history_ts_low`. In this process, it's assuming that a newer memtable should not have smaller user-defined timestamps than an older memtable. This check however is enforcing ordering of user-defined timestamps across keys, as apposed to the vanilla UDT feature, that only enforce ordering of user-defined timestamps for the same key.
This more strict user-defined timestamp ordering requirement could be an issue for secondary instances where commits can be out of order. And after thinking more about it, this requirement is really an overkill to keep the invariants of `full_history_ts_low` which are:
1) users cannot read below `full_history_ts_low`
2) users cannot write at or below `full_history_ts_low`
3) `full_history_ts_low` can only be increasing
As long as RocksDB enforces these 3 checks, we can prohibit inconsistent read that returns a different value. And these three checks are covered in existing APIs.
So this PR removes the extra checks in the UDT in memtable only feature that requires user-defined timestamps to be non decreasing across keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11732
Reviewed By: ltamasi
Differential Revision: D48541466
Pulled By: jowlyzhang
fbshipit-source-id: 95453c6e391cbd511c0feab05f0b11c312d17186
Summary:
`VersionBuilderMap` type alias definition seem unused.
If this PR can be compiled fine then the alias is probably not needed anymore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11286
Reviewed By: jaykorean
Differential Revision: D48656747
Pulled By: ajkr
fbshipit-source-id: ac8554922aead7dc3d24fe7e6544a4622578c514
Summary:
**Context/Summary:**
Same intention as https://github.com/facebook/rocksdb/pull/2693 - basically we now pick from the last sorted run and expand forward till we can't
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11740
Test Plan:
Existing UT
Stress test
Reviewed By: ajkr
Differential Revision: D48586475
Pulled By: hx235
fbshipit-source-id: 3eb3c3ee1d5f7e0b0d6d649baaeb8c6990fee398
Summary:
Add a bunch of C API functions to expose new `WaitForCompact` function and related options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11737
Test Plan: unit tests
Reviewed By: jaykorean
Differential Revision: D48568239
Pulled By: abulimov
fbshipit-source-id: 1ff35972d7abacd7e1e17fe2ada1e20cdc88d8de
Summary:
This piggy back the existing last level file temperature statistics test to test the default temperature becoming effective.
While adding this unit test, I found that the approach to swap out and use default temperature in `VersionBuilder::LoadTableHandlers` will miss the L0 files created from flush, and only work for existing SST files, SST files created by compaction. So this PR moves that logic to `TableCache::GetTableReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11722
Test Plan:
```
./db_test2 --gtest_filter="*LastLevelStatistics*"
make all check
```
Reviewed By: pdillinger
Differential Revision: D48489171
Pulled By: jowlyzhang
fbshipit-source-id: ac29f7d484916f3218729594c5bb35c4f2979ac2
Summary:
While it's rare, we may run into a scenario where `WaitForCompact()` waits for background jobs indefinitely. For example, not enough space error will add the job back to the queue while WaitForCompact() waits for _all jobs_ including the jobs that are in the queue to be completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11711
Test Plan:
`DBCompactionWaitForCompactTest::WaitForCompactToTimeout` added
`timeout` option added to the variables for all of the existing DBCompactionWaitForCompactTests
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D48416390
Pulled By: jaykorean
fbshipit-source-id: 7b6a12f705ab6c6dfaf8ad736a484ca654a86106
Summary:
Add a column family option `default_temperature` that will be used for file reading accounting purpose, such as io statistics, for files that don't have an explicitly set temperature.
This options is not a mutable one, changing its value would require a DB restart. This is to avoid the confusion that had the option being a mutable one, the users may expect it to take effect on all files immediately, while in reality, it would only become effective for SST files opened in the future.
This `default_temperature` also just affect accounting during one DB session. It won't be recorded in manifest as the file's temperature and can be different across different DB sessions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11708
Test Plan:
```
make all check
```
Reviewed By: pdillinger
Differential Revision: D48375763
Pulled By: jowlyzhang
fbshipit-source-id: eb756696c14a694c6e2a93d2bb6f040563194981
Summary:
For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions.
* The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701
Test Plan:
* Add two unit tests to test when bottommost_file_compaction_delay > 0.
* Ran crash test with the new option.
Reviewed By: jaykorean, ajkr
Differential Revision: D48331564
Pulled By: cbi42
fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8
Summary:
As titled, mostly adding documentation. While updating one usage of these util functions in the external file ingestion job based on code inspection.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11674
Test Plan:
```
make check
```
Note that no unit test was added or updated to check the change in the external file ingestion flow works. This is because user-defined timestamp doesn't support bulk loading yet. There could be other missing pieces that are needed to make this flow functional and testable. That work is separately tracked and unit tests will be added then.
Reviewed By: cbi42
Differential Revision: D48271338
Pulled By: jowlyzhang
fbshipit-source-id: c05c3440f1c08632dd0de51b563a30b44b4eb8b5
Summary:
* The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation.
* Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache).
* Simplify some existing tests not to depend directly on cache type.
* Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation.
* Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test.
* Add another templated class BaseHyperClockCache to reduce future copy-paste
* Added ReportProblems support to cache_bench
* Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC:
```
2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17
```
In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692
Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in.
Reviewed By: jowlyzhang
Differential Revision: D48247413
Pulled By: pdillinger
fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
Summary:
Context:
As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `close_db` option in `WaitForCompactOptions` to close DB after waiting for compactions to finish. Must be set to true to close the DB upon compactions finishing.
1. `bool close_db = false` added to `WaitForCompactOptions`
2. Introduced `CancelPeriodicTaskSchedulers()` and moved unregistering PeriodicTaskSchedulers to it.`CancelAllBackgroundWork()` calls it now.
3. When close_db option is on, unpersisted data (data in memtable when WAL is disabled) will be flushed in `WaitForCompact()` if flush option is not on (and `mutable_db_options_.avoid_flush_during_shutdown` is not true). The unpersisted data flush in `CancelAllBackgroundWork()` will be skipped because `shutting_down_` flag will be set true before calling `Close()`.
4. Atomic boolean `reject_new_background_jobs_` is introduced to prevent new background jobs from being added during the short period of time after waiting is done and before `shutting_down_` is set by `Close()`.
5. `WaitForCompact()` now waits for recovery in progress to complete as well. (flush operations from WAL -> L0 files)
6. Added `close_db_` cases to all existing `WaitForCompactTests`
7. Added a scenario to `DBBasicTest::DBClose`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11497
Test Plan:
- Existing DBCompactionTests
- `WaitForCompactWithOptionToFlushAndCloseDB` added
- Added a scenario to `DBBasicTest::DBClose`
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D46337560
Pulled By: jaykorean
fbshipit-source-id: 0f8c7ee09394847f2af5ea4bdd331b47bcdef0b0
Summary:
This API should consider the case when user-defined timestamp is enabled. Also added some documentation to some related API to clarify the usage in the case when user-defined timestamp is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11689
Test Plan:
Unit test added
```
make check
./db_with_timestamp_basic_test --gtest_filter=*GetApproximateSizes*
```
Reviewed By: ltamasi
Differential Revision: D48208568
Pulled By: jowlyzhang
fbshipit-source-id: c5baa4a2923441f8ea3a3672c98223a43a3428dc
Summary:
RocksDB provides APIs that enable creating SST files offline and then bulk loading them into the LSM tree quickly using metadata operations. Namely, clients can use the `SstFileWriter` class for the offline data preparation and then the IngestExternalFile family of APIs to perform the bulk loading. However, `SstFileWriter` currently does not support creating files with wide-column data in them. This PR adds `PutEntity` API implementation to `SstFileWriter` to support creating files with wide-column data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11688
Test Plan: - `BasicWideColumn` test added in external_sst_file_test
Reviewed By: ltamasi
Differential Revision: D48243779
Pulled By: jaykorean
fbshipit-source-id: 1697e5bd67121a648c03946f867416a94be0cadf
Summary:
It seems the flag `-fno-elide-constructors` is incorrectly overwritten in Makefile by 9c2ebcc2c3/Makefile (L243)
Applying the change in PR https://github.com/facebook/rocksdb/issues/11675 shows a lot of missing status checks. This PR adds the missing status checks.
Most of changes are just adding asserts in unit tests. I'll add pr comment around more interesting changes that need review.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11686
Test Plan: change Makefile as in https://github.com/facebook/rocksdb/issues/11675, and run `ASSERT_STATUS_CHECKED=1 TEST_UINT128_COMPAT=1 ROCKSDB_MODIFY_NPHASH=1 LIB_MODE=static OPT="-DROCKSDB_NAMESPACE=alternative_rocksdb_ns" make V=1 -j24 J=24 check`
Reviewed By: hx235
Differential Revision: D48176132
Pulled By: cbi42
fbshipit-source-id: 6758946cfb1c6ff84c4c1e0ca540d05e6fc390bd
Summary:
Set up the default column family timestamp size for a reused write committed transaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11685
Test Plan: Added unit test.
Reviewed By: ltamasi
Differential Revision: D48195129
Pulled By: jowlyzhang
fbshipit-source-id: 54faa900c123fc6daa412c01490e36c10a24a678
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version: 604f6fd3f4
- db_basic_bench_base: upstream
- db_basic_bench_pr: db_basic_bench_base + this PR
- asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read)
- asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR
**Test**
Get
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000
```
Result
```
Coming soon
```
AsyncRead
```
TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out
```
Result
```
Base:
1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008,
PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before):
1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053,
```
Reviewed By: ajkr
Differential Revision: D45918925
Pulled By: hx235
fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
Summary:
As titled, and also removed an undefined and unused member function in for ColumnFamilyData
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11683
Reviewed By: ajkr
Differential Revision: D48156290
Pulled By: jowlyzhang
fbshipit-source-id: cc99aaafe69db6611af3854cb2b2ebc5044941f7
Summary:
Although the built-in Cache implementations never return failure on Insert without keeping a reference (Handle), a custom implementation could. The code for inserting into row_cache does not keep a reference but does not clean up appropriately on non-OK. This is a fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11682
Test Plan: unit test added that previously fails under ASAN
Reviewed By: ajkr
Differential Revision: D48153831
Pulled By: pdillinger
fbshipit-source-id: 86eb7387915c5b38b6ff5dd8deb4e1e223b7d020
Summary:
Only re-calculate compaction score once for a batch of deletions. Fix performance regression brought by https://github.com/facebook/rocksdb/pull/8434.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10744
Test Plan:
In one of our production cluster that recently upgraded to RocksDB 6.29, it takes more than 10 minutes to delete files in 30,000 ranges. The RocksDB instance contains approximately 80,000 files. After this patch, the duration reduces to 100+ ms, which is on par with RocksDB 6.4.
Cherry-picking downstream PR: https://github.com/tikv/rocksdb/pull/316
Signed-off-by: tabokie <xy.tao@outlook.com>
Reviewed By: cbi42
Differential Revision: D48002581
Pulled By: ajkr
fbshipit-source-id: 7245607ee3ad79c53b648a6396c9159f166b9437
Summary:
An internal user reported this copy showing up in a CPU profile. We can use move instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11681
Differential Revision: D48103170
Pulled By: ajkr
fbshipit-source-id: 083d6470181a0041bb5275b657aa61bee23a3729
Summary:
When `num_levels` > 65, we may be shifting more than 63 bits in FileTtlBooster. This can give errors like: `runtime error: shift exponent 98 is too large for 64-bit type 'uint64_t' (aka 'unsigned long')`. This PR makes a quick fix for this issue by taking a min in the shifting component. This issue should be rare since it requires a user using a large `num_levels`. I'll follow up with a more complex fix if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11673
Test Plan: * Add a unit test that produce the above error before this PR. Need to compile it with ubsan: `COMPILE_WITH_UBSAN=1 OPT="-fsanitize-blacklist=.circleci/ubsan_suppression_list.txt" ROCKSDB_DISABLE_ALIGNED_NEW=1 USE_CLANG=1 make V=1 -j32 compaction_picker_test`
Reviewed By: hx235
Differential Revision: D48074386
Pulled By: cbi42
fbshipit-source-id: 25e59df7e93f20e0793cffb941de70ac815d9392
Summary:
**Context/Summary:**
After https://github.com/facebook/rocksdb/pull/11631, file hint is not longer needed for compaction read. Therefore we can deprecate `Options::access_hint_on_compaction_start`. As this is a public API change, we should first mark the relevant APIs (including the Java's) deprecated and remove it in next major release 9.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11658
Test Plan: No code change
Reviewed By: ajkr
Differential Revision: D47997856
Pulled By: hx235
fbshipit-source-id: 16e015ae7728c224b1caef73143aa9915668f4ac
Summary:
Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358
Test Plan:
* New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions`
* Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions.
Reviewed By: ajkr
Differential Revision: D46582680
Pulled By: cbi42
fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da
Summary:
Adds a few missing features to the C API:
1) Statistics level
2) Getting individual values instead of a serialized string
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11263
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D47309963
Pulled By: hx235
fbshipit-source-id: 84df59db4045fc0fb3ea4aec451bc5c2afd2a248
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
Summary:
... to improve data integrity validation during compaction.
A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.
For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.
For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571
Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`
Reviewed By: ajkr
Differential Revision: D47131965
Pulled By: cbi42
fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
Summary:
Make flush respect the cutoff timestamp `full_history_ts_low` as much as possible for the user-defined timestamps in Memtables only feature. We achieve this by not proceeding with the actual flushing but instead reschedule the same `FlushRequest` so a follow up flush job can continue with the check after some interval.
This approach doesn't work well for atomic flush, so this feature currently is not supported in combination with atomic flush. Furthermore, this approach also requires a customized method to get the next immediately bigger user-defined timestamp. So currently it's limited to comparator that use uint64_t as the user-defined timestamp format. This support can be extended when we add such a customized method to `AdvancedColumnFamilyOptions`.
For non atomic flush request, at any single time, a column family can only have as many as one FlushRequest for it in the `flush_queue_`. There is deduplication done at `FlushRequest` enqueueing(`SchedulePendingFlush`) and dequeueing time (`PopFirstFromFlushQueue`). We hold the db mutex between when a `FlushRequest` is popped from the queue and the same FlushRequest get rescheduled, so no other `FlushRequest` with a higher `max_memtable_id` can be added to the `flush_queue_` blocking us from re-enqueueing the same `FlushRequest`.
Flush is continued nevertheless if there is risk of entering write stall mode had the flush being postponed, e.g. due to accumulation of write buffers, exceeding the `max_write_buffer_number` setting. When this happens, the newest user-defined timestamp in the involved Memtables need to be tracked and we use it to increase the `full_history_ts_low`, which is an inclusive cutoff timestamp for which RocksDB promises to keep all user-defined timestamps equal to and newer than it.
Tet plan:
```
./column_family_test --gtest_filter="*RetainUDT*"
./memtable_list_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11599
Reviewed By: ajkr
Differential Revision: D47561586
Pulled By: jowlyzhang
fbshipit-source-id: 9400445f983dd6eac489e9dd0fb5d9b99637fe89
Summary:
this is stacked on https://github.com/facebook/rocksdb/issues/11550 to further clarify usage of these two options for universal compaction. Similar to FIFO, the two options have the same meaning for universal compaction, which can be confusing to use. For example, for universal compaction, dynamically changing the value of `ttl` has no impact on periodic compactions. Users should dynamically change `periodic_compaction_seconds` instead. From feature matrix (https://fburl.com/daiquery/5s647hwh), there are instances where users set `ttl` to non-zero value and `periodic_compaction_seconds` to 0. For backward compatibility reason, instead of deprecating `ttl`, comments are added to mention that `periodic_compaction_seconds` are preferred. In `SanitizeOptions()`, we update the value of `periodic_compaction_seconds` to take into account value of `ttl`. The logic is documented in relevant option comment.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11552
Test Plan: * updated existing unit test `DBTestUniversalCompaction2.PeriodicCompactionDefault`
Reviewed By: ajkr
Differential Revision: D47381434
Pulled By: cbi42
fbshipit-source-id: bc41f29f77318bae9a96be84dd89bf5617c7fd57
Summary:
Add `rocksdb_transactiondb_get_base_db` and `rocksdb_transactiondb_close_base_db` functions to the C API modeled after `rocksdb_optimistictransactiondb_get_base_db` and `rocksdb_optimistictransactiondb_close_base_db`:
ca50ccc71a/include/rocksdb/c.h (L2711-L2716)
With this pair of functions, it is possible to get a `rocksdb_t *` from a `rocksdb_transactiondb_t *`. The main goal is to be able to use the approximate memory usage API, only accessible to the `rocksdb_t *` type:
ca50ccc71a/include/rocksdb/c.h (L2821-L2833)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11562
Reviewed By: ajkr
Differential Revision: D47603343
Pulled By: jowlyzhang
fbshipit-source-id: c70cf6af5834026e232fe7791634db3a396f7d5e
Summary:
In [db_impl_open.cc](https://github.com/facebook/rocksdb/blob/main/db/db_impl/db_impl_open.cc), the sync point `SanitizeOptions::AfterChangeMaxOpenFiles` is used to set `max_open_files` with some specified "**invalid**" value even if it has been sanitized.
However, in [db_compaction_test.cc](https://github.com/facebook/rocksdb/blob/main/db/db_compaction_test.cc), `SanitizeOptions::AfterChangeMaxOpenFiles` would not be executed since `SyncPoint::EnableProcessing()` is run after `DBTestBase::Reopen()`. To enable `SanitizeOptions::AfterChangeMaxOpenFiles`, `SyncPoint::EnableProcessing()` should be put ahead of `DBTestBase::Reopen()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11583
Test Plan:
run unit tests locally as below:
```
make J=1 check
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
[ OK ] DBCompactionTest.LevelTtlCascadingCompactions (85 ms)
[ RUN ] DBCompactionTest.LevelPeriodicCompaction
[ OK ] DBCompactionTest.LevelPeriodicCompaction (57 ms)
```
Reviewed By: jowlyzhang
Differential Revision: D47311827
Pulled By: ajkr
fbshipit-source-id: 99165e87a8129e404af06fdf9b4c96eca540fd23
Summary:
An internal user wants to implement a key-aware row cache policy. For that, they need to know the components of the cache key, especially the user key component. With a specialized `RowCache` interface, we will be able to tell them the components so they won't have to make assumptions about our internal key schema.
This PR prepares for the specialized `RowCache` interface by updating the migration plan of https://github.com/facebook/rocksdb/issues/11450. I added a release note for the removed APIs and didn't mention the added ones for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11620
Reviewed By: pdillinger
Differential Revision: D47536962
Pulled By: ajkr
fbshipit-source-id: bbee0fc4ad67fc699a66b8f2b4ea4544dd003691
Summary:
Extend the coverage for option `flush_verify_memtable_count`. The verification code is similar to the ones for regular flush: c3c84b3397/db/flush_job.cc (L956-L965)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11611
Test Plan: existing tests.
Reviewed By: ajkr
Differential Revision: D47478893
Pulled By: cbi42
fbshipit-source-id: ca580c9dbcd6e91facf2e49210661336a79a248e
Summary:
We observed `CompactionOutputs::UpdateGrandparentBoundaryInfo` consumes much time for `InternalKey::DecodeFrom` and `InternalKey::~InternalKey` in flame graph.
This PR omit the InternalKey object in `CompactionOutputs::UpdateGrandparentBoundaryInfo` .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11610
Reviewed By: ajkr
Differential Revision: D47426971
Pulled By: cbi42
fbshipit-source-id: f0d3a8186d778294515c0685032f5b395c4d6a62
Summary:
I got the following error message when an SST file is recorded in MANIFEST but is missing from the db folder.
It's confusing in two ways:
1. The part about file "./074837.ldb" which RocksDB will attempt to open only after ./074837.sst is not found.
2. The last part about "No such file or directory in file ./MANIFEST-074507" sounds like `074837.ldb` is not found in manifest.
```
ldb --hex --db=. get some_key
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.ldb: No such file or directory in file ./MANIFEST-074507
```
Improving the error message a little bit:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11573
Test Plan:
run the same command after this PR
```
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.sst: No such file or directory The file ./MANIFEST-074507 may be corrupted.
```
Reviewed By: ajkr
Differential Revision: D47192056
Pulled By: cbi42
fbshipit-source-id: 06863f376cc4455803cffb2250c41399b4c39467
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578
Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```
Reviewed By: pdillinger
Differential Revision: D47309399
Pulled By: jowlyzhang
fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
Summary:
Thanks pdillinger for pointing out this test hole. The test `DBWALTestWithTimestamp.Recover` that is intended to test recovery from WAL including user-defined timestamps doesn't achieve its promised coverage. Specifically, after https://github.com/facebook/rocksdb/issues/11557, timestamps will be removed during flush, and RocksDB by default flush memtables during recovery with `avoid_flush_during_recovery` defaults to false. This test didn't fail even if all the timestamps are quickly lost due to the default flush behavior.
This PR renamed test `Recover` to `RecoverAndNoFlush`, and updated it to verify timestamps are successfully recovered from WAL with some time-travel reads. `avoid_flush_during_recovery` is set to true to help do this verification.
On the other hand, for test `DBWALTestWithTimestamp.RecoverAndFlush`, since flush on reopen is DB's default behavior. Setting the flags `max_write_buffer` and `arena_block_size` are not really the factors that enforces the flush, so these flags are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11577
Test Plan: ./db_wal_test
Reviewed By: pdillinger
Differential Revision: D47142892
Pulled By: jowlyzhang
fbshipit-source-id: 9465e278806faa5885b541b4e32d99e698edef7d
Summary:
https://github.com/facebook/rocksdb/issues/11542 added a parameter to the C API `rocksdb_options_add_compact_on_deletion_collector_factory` which causes some internal builds to fail. External users using this API would also require code change. Making the API backward compatible by restoring the old C API and add the parameter to a new C API `rocksdb_options_add_compact_on_deletion_collector_factory_del_ratio`.
Also updated change log for 8.4 and will backport this change to 8.4 branch once landed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11593
Test Plan: `make c_test && ./c_test`
Reviewed By: akankshamahajan15
Differential Revision: D47299555
Pulled By: cbi42
fbshipit-source-id: 517dc093ef4cf02cac2fe4af4f1af13754bbda63
Summary:
both options `ttl` and `periodic_compaction_seconds` have the same meaning for FIFO compaction, which is redundant and can be confusing to use. For example, setting TTL to 0 does not disable TTL: user needs to also set periodic_compaction_seconds to 0. Another example is that dynamically setting `periodic_compaction_seconds` (surprisingly) has no effect on TTL compaction. This is because FIFO compaction picker internally only looks at value of `ttl`. The value of `ttl` is in `SanitizeOptions()` which take into account the value of `periodic_compaction_seconds`, but dynamically setting an option does not invoke this method.
This PR clarifies the usage of both options for FIFO compaction: only `ttl` should be used, `periodic_compaction_seconds` will not have any effect on FIFO compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11550
Test Plan:
- updated existing unit test `DBOptionsTest.SanitizeFIFOPeriodicCompaction`
- checked existing values of both options in feature matrix: https://fburl.com/daiquery/xxd0gs9w. All current uses cases either have `periodic_compaction_seconds = 0` or have `periodic_compaction_seconds > ttl`, so should not cause change of behavior.
Reviewed By: ajkr
Differential Revision: D46902959
Pulled By: cbi42
fbshipit-source-id: a9ede235b276783b4906aaec443551fa62ceff4c
Summary:
This should be a benign bug caused by a long lived typo, this PR fix this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11398
Reviewed By: ajkr
Differential Revision: D47163379
Pulled By: cbi42
fbshipit-source-id: 531728cae496fd7ac1371bbbd64fc103c3a90dcf
Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.
While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
PR vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557
Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.
```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```
Reviewed By: pdillinger
Differential Revision: D47027664
Pulled By: jowlyzhang
fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
Summary:
Expose the remaining fields of PlainTableOptions as arguments to `rocksdb_options_set_plain_table_factory` in the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11442
Reviewed By: ajkr
Differential Revision: D46786962
Pulled By: hx235
fbshipit-source-id: 8862083dde332bfecc5ff02f9375776ad35c11f5
Summary:
https://github.com/facebook/rocksdb/issues/11378 added a new overloaded `CreateColumnFamilyWithImport` API and updated the virtual function in `StackableDB` and `DBImplReadOnly` to the newly overloaded one. This caused internal error when there is a derived class that tries to override the original `CreateColumnFamilyWithImport` function. This PR adds the original `CreateColumnFamilyWithImport` function back to `StackableDB` and `DBImplReadOnly`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11556
Test Plan: check if this fixes an internal build
Reviewed By: akankshamahajan15
Differential Revision: D46980506
Pulled By: cbi42
fbshipit-source-id: 975a6c5748bf9481499a62ee5997ca59e542e3bc
Summary:
1. Public API change: Replace `use_async_io` API in file_system with `SupportedOps` API which is used by underlying FileSystem to indicate to upper layers whether the FileSystem supports different operations introduced in `enum FSSupportedOps `. Right now operations are `async_io` and whether FS will provide its own buffer during reads or not. The api is changed to extend it to various FileSystem operations in one API rather than creating a separate API for each operation.
2. Provide support for underlying FS to pass their own buffer during Reads (async and sync read) instead of using RocksDB provided `scratch` (buffer) in `FSReadRequest`. Currently only MultiRead supports it and later will be extended to other reads as well (point lookup, scan etc). More details in how to enable in file_system.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11324
Test Plan: Tested locally
Reviewed By: anand1976
Differential Revision: D44465322
Pulled By: akankshamahajan15
fbshipit-source-id: 9ec9e08f839b5cc815e75d5dade6cd549998d0ec
Summary:
Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515
Test Plan:
```
make all check
./version_edit_test
```
Reviewed By: ltamasi
Differential Revision: D46920386
Pulled By: jowlyzhang
fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26
Summary:
The class `NewCompactOnDeletionCollectorFactory` exposes the parameter `delete_ratio`.
The C API `rocksdb_options_add_compact_on_deletion_collector_factory` does not allow a user to pass a delete ration to be passed down the the C++ class bellow.
The class has default value for the delete ratio which makes it pass the compilation and the tests.
closes https://github.com/facebook/rocksdb/issues/11541
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11542
Reviewed By: ajkr
Differential Revision: D46770908
Pulled By: cbi42
fbshipit-source-id: 7b5162fe459896052e392e2d85a8f6c01db3b464
Summary:
Calling `Flush` (even with `wait==true`) does not guarantee that obsolete WAL files are physically deleted before the call returns. The patch attempts to fix the resulting flakiness by using `SyncPoint`s to make sure `PurgeObsoleteFiles` finishes before checking for WAL deletions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11537
Test Plan:
```
gtest-parallel --repeat=1000 ./db_wal_test --gtest_filter="*SkipDeletedWALs*"
```
Reviewed By: pdillinger
Differential Revision: D46736050
Pulled By: ltamasi
fbshipit-source-id: 47a931b7a3a03ef681fbf4adb5a0b223d452703e
Summary:
after https://github.com/facebook/rocksdb/issues/11321 and https://github.com/facebook/rocksdb/issues/11340 (both included in RocksDB v8.2), migration from `level_compaction_dynamic_level_bytes=false` to `level_compaction_dynamic_level_bytes=true` is automatic by RocksDB and requires no manual compaction from user. Making the option true by default as it has several advantages: 1. better space amplification guarantee (a more stable LSM shape). 2. compaction is more adaptive to write traffic. 3. automatic draining of unneeded levels. Wiki is updated with more detail: https://github.com/facebook/rocksdb/wiki/Leveled-Compaction#option-level_compaction_dynamic_level_bytes-and-levels-target-size.
The PR mostly contains fixes for unit tests as they assumed `level_compaction_dynamic_level_bytes=false`. Most notable change is commit f742be330c and b1928e42b3 which override the default option in DBTestBase to still set `level_compaction_dynamic_level_bytes=false` by default. This helps to reduce the change needed for unit tests. I think this default option override in unit tests is okay since the behavior of `level_compaction_dynamic_level_bytes=true` is tested by explicitly setting this option. Also, `level_compaction_dynamic_level_bytes=false` may be more desired in unit tests as it makes it easier to create a desired LSM shape.
Comment for option `level_compaction_dynamic_level_bytes` is updated to reflect this change and change made in https://github.com/facebook/rocksdb/issues/10057.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11525
Test Plan: `make -j32 J=32 check` several times to try to catch flaky tests due to this option change.
Reviewed By: ajkr
Differential Revision: D46654256
Pulled By: cbi42
fbshipit-source-id: 6b5827dae124f6f1fdc8cca2ac6f6fcd878830e1
Summary:
The original Feature Request is from [https://github.com/facebook/rocksdb/issues/11317](https://github.com/facebook/rocksdb/issues/11317).
Flink uses rocksdb as the state backend, all DB options are the same, and the keys of each DB instance are adjacent and there is no key overlap between two db instances.
In the Flink rescaling scenario, it is necessary to quickly split the DB according to a certain key range or quickly merge multiple DBs into one.
This PR is mainly used to quickly merge multiple DBs into one.
We hope to extend the function of `CreateColumnFamilyWithImports` to support creating ColumnFamily by importing multiple ColumnFamily with no overlapping keys.
The import logic is almost the same as `CreateColumnFamilyWithImport`, but it will check whether there is key overlap between CF when importing. The import will fail if there are key overlaps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11378
Reviewed By: ajkr
Differential Revision: D46413709
Pulled By: cbi42
fbshipit-source-id: 846d0049fad11c59cf460fa846c345b26c658dfb
Summary:
when a DB is configured with `allow_ingest_behind = true`, the last level should be reserved for ingested files and these files should not be included in any compaction. Currently, a major compaction can compact these files to smaller levels. This can cause future files to be rejected for ingest behind (see `ExternalSstFileIngestionJob::CheckLevelForIngestedBehindFile()`). This PR fixes the issue such that files in the last level is not included in any compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11489
Test Plan: * Updated unit test `ExternalSSTFileTest.IngestBehind` to test that last level is not included in manual and auto-compaction.
Reviewed By: ajkr
Differential Revision: D46455711
Pulled By: cbi42
fbshipit-source-id: 5e2142c2a709ef932ad797897795021c06c4ac8c
Summary:
See "unreleased_history/new_features/obsolete_sst_files_size.md" for description
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11533
Test Plan: updated unit test
Reviewed By: jowlyzhang
Differential Revision: D46703152
Pulled By: ajkr
fbshipit-source-id: ea5e31cd6293eccc154130c13e66b5271f57c102
Summary:
Add new tickers: `rocksdb.error.handler.bg.error.count`, `rocksdb.error.handler.bg.io.error.count`, `rocksdb.error.handler.bg.retryable.io.error.count` to replace the misspelled ones: `rocksdb.error.handler.bg.errro.count`, `rocksdb.error.handler.bg.io.errro.count`, `rocksdb.error.handler.bg.retryable.io.errro.count` ('error' instead of 'errro'). Users should switch to use the new tickers before 9.0 release as the misspelled old tickers will be completely removed then.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11509
Reviewed By: ltamasi
Differential Revision: D46542809
Pulled By: jowlyzhang
fbshipit-source-id: a2a6d8354af46a060de81d40ef6f5336a80bd32e
Summary:
The `rocksdb.db.get.micros` histogram is never updated if the DB is open in ReadOnly mode, as well as the `get_cpu_nanos` perf counter. An earlier PR (https://github.com/facebook/rocksdb/issues/4260) for some reason has only added the TODO line, not the accounting itself, so this one is intended to fix it, adding two lines to match [DBImplSecondary](4dafa5b220/db/db_impl/db_impl_secondary.cc (L366-L367)).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11521
Reviewed By: cbi42
Differential Revision: D46577330
Pulled By: jowlyzhang
fbshipit-source-id: be147923e763af32bbc18fd6bdf3aff8ebf08aee
Summary:
Fix the test added in https://github.com/facebook/rocksdb/issues/11459 that is failing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11512
Test Plan: `./db_range_del_test --gtest_filter="*NonBottommostCompactionDropRangetombstone"`
Reviewed By: pdillinger
Differential Revision: D46451450
Pulled By: cbi42
fbshipit-source-id: bcad20b8fd21c4f71924cec6cb045ee4b2038b90
Summary:
Switch from std::unordered_map to RocksDB UnorderedMap for all the places that logging user-defined timestamp size in WAL used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11507
Test Plan:
```
make all check
```
Reviewed By: ltamasi
Differential Revision: D46448975
Pulled By: jowlyzhang
fbshipit-source-id: bdb4d56a723b697a33daaf0f856a61d49a367a99
Summary:
Similar to point tombstones, we can drop a range tombstone during compaction when we know its range does not exist in any higher level. This PR adds this optimization. Some existing test in db_range_del_test is fixed to work under this optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11459
Test Plan:
* Add unit test `DBRangeDelTest, NonBottommostCompactionDropRangetombstone`.
* Ran crash test that issues range deletion for a few hours: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=1048576 --delrangepercent=10 --writepercent=31 --readpercent=40`
Reviewed By: ajkr
Differential Revision: D46007904
Pulled By: cbi42
fbshipit-source-id: 3f37205b6778b7d55ed106369ca41b0632a6d0fd
Summary:
currently for leveled compaction, the max output level of a call to `CompactRange()` is pre-computed before compacting each level. This max output level is the max level whose key range overlaps with the manual compaction key range. However, during manual compaction, files in the max output level may be compacted down further by some background compaction. When this background compaction is a trivial move, there is a race condition and the manual compaction may not be able to compact all keys in the specified key range. This PR updates `CompactRange()` to always compact to the bottommost level to make this race condition more unlikely (it can still happen, see more in comment here: 796f58f42a/db/db_impl/db_impl_compaction_flush.cc (L1180C29-L1184)).
This PR also changes the behavior of CompactRange() when `bottommost_level_compaction=kIfHaveCompactionFilter` (the default option). The old behavior is that, if a compaction filter is provided, CompactRange() always does an intra-level compaction at the final output level for all files in the manual compaction key range. The only exception when `first_overlapped_level = 0` and `max_overlapped_level = 0`. It’s awkward to maintain the same behavior after this PR since we do not compute max_overlapped_level anymore. So the new behavior is similar to kForceOptimized: always does intra-level compaction at the bottommost level, but not including new files generated during this manual compaction.
Several unit tests are updated to work with this new manual compaction behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11468
Test Plan: Add new unit tests `DBCompactionTest.ManualCompactionCompactAllKeysInRange*`
Reviewed By: ajkr
Differential Revision: D46079619
Pulled By: cbi42
fbshipit-source-id: 19d844ba4ec8dc1a0b8af5d2f36ff15820c6e76f
Summary:
Context:
As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `flush` option in `WaitForCompactOptions` to flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
1. `bool flush = false` added to `WaitForCompactOptions`
2. `DBImpl::FlushAllColumnFamilies()` is introduced and `DBImpl::FlushForGetLiveFiles()` is refactored to call it.
3. `DBImpl::FlushAllColumnFamilies()` gets called before waiting in `WaitForCompact()` if `flush` option is `true`
4. Some previous WaitForCompact tests were parameterized to include both cases for `abort_on_pause_` being true/false as well as `flush_` being true/false
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11483
Test Plan:
- `DBCompactionTest::WaitForCompactWithOptionToFlush` added
- Changed existing DBCompactionTest::WaitForCompact tests to `DBCompactionWaitForCompactTest` to include params
Reviewed By: pdillinger
Differential Revision: D46289770
Pulled By: jaykorean
fbshipit-source-id: 70d3f461d96a6e06390be60170dd7c4d0d38f8b0
Summary:
Start logging the timestamp size record in WAL and use the record during recovery. Currently, user comparator cannot be different from what was used to create a column family, so the timestamp size record is just used to confirm it's consistent with the timestamp size the running user comparator indicates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11471
Test Plan:
```
make all check
./db_secondary_test
./db_wal_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
```
Reviewed By: ltamasi
Differential Revision: D46236769
Pulled By: jowlyzhang
fbshipit-source-id: f6c60b5c8defdb05021c63df302ccc0be1275ad0
Summary:
Together with the existing constructor,
`explicit WriteBatch(std::string&& rep)`, this enables transferring `WriteBatch` via its `std::string` representation. Associated info like KV checksums are dropped but the caller can use `WriteBatch::VerifyChecksum()` before taking ownership if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11482
Reviewed By: cbi42
Differential Revision: D46233884
Pulled By: ajkr
fbshipit-source-id: 6bc64a6e75fb7bbf61d08c09520fc3705a7b44d8
Summary:
`output_level_` and `number_levels_` are not changing in iteration of `inputs_` files.
Moving the check out of `for` loop could slightly improve performance.
It is easier to review when ignore whitespace changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11467
Reviewed By: cbi42
Differential Revision: D46155962
Pulled By: ajkr
fbshipit-source-id: 45ec80b13152b3bed7305e6f707cb9b187d5f315
Summary:
Context:
This is the first PR for WaitForCompact() Implementation with WaitForCompactOptions. In this PR, we are introducing `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` in the public API. This currently utilizes the existing internal `WaitForCompact()` implementation (with default abort_on_pause = false). `abort_on_pause` has been moved to `WaitForCompactOptions&`. In the later PRs, we will introduce the following two options in `WaitForCompactOptions`
1. `bool flush = false` by default - If true, flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB.
2. `bool close_db = false` by default - If true, will also close the DB upon compactions finishing.
1. struct `WaitForCompactOptions` added to options.h and `abort_on_pause` in the internal API moved to the option struct.
2. `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` introduced in `db.h`
3. Changed the internal WaitForCompact() to `WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` and checks for the `abort_on_pause` inside the option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11436
Test Plan:
Following tests added
- `DBCompactionTest::WaitForCompactWaitsOnCompactionToFinish`
- `DBCompactionTest::WaitForCompactAbortOnPauseAborted`
- `DBCompactionTest::WaitForCompactContinueAfterPauseNotAborted`
- `DBCompactionTest::WaitForCompactShutdownWhileWaiting`
- `TransactionTest::WaitForCompactAbortOnPause`
NOTE: `TransactionTest::WaitForCompactAbortOnPause` was added to use `StackableDB` to ensure the wrapper function is in place.
Reviewed By: pdillinger
Differential Revision: D45799659
Pulled By: jaykorean
fbshipit-source-id: b5b58f95957f2ab47d1221dee32a61d6cdc4685b
Summary:
This patch adds support in `BlockBuilder` to strip user-defined timestamp from the `key` added via `Add(key, value)` and its equivalent APIs. The stripping logic is different when the key is either a user key or an internal key, so the `BlockBuilder` is created with a flag to indicate that. This patch also add support on the read path to APIs `NewIndexIterator`, `NewDataIterator` to support pad a min timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11472
Test Plan:
Three test modes are added to parameterize existing tests:
UserDefinedTimestampTestMode::kNone -> UDT feature is not enabled
UserDefinedTimestampTestMode::kNormal -> UDT feature enabled, write / read with min timestamp
UserDefinedTimestampTestMode::kStripUserDefinedTimestamps -> UDT feature enabled, write / read with min timestamp, set `persist_user_defined_timestamps` where it applies to false.
The tests read/write with min timestamp so that point read and range scan can correctly read values in all three test modes.
`block_test` are parameterized to run with above three test modes and some additional parameteriazation
```
make all check
./block_test --gtest_filter="P/BlockTest*"
./block_test --gtest_filter="P/IndexBlockTest*"
```
Reviewed By: ltamasi
Differential Revision: D46200539
Pulled By: jowlyzhang
fbshipit-source-id: 59f5d6b584639976b69c2943eba723bd47d9b3c0
Summary:
Currently it's easy to use a ton of memory with many small OptimisticTransactionDB instances, because each one by default allocates a million mutexes (40 bytes each on my compiler) for validating transactions. It even puts a lot of pressure on the allocator by allocating each one individually!
In this change:
* Create a new object and option that enables sharing these buckets of mutexes between instances. This is generally good for load balancing potential contention as various DBs become hotter or colder with txn writes. About the only cases where this sharing wouldn't make sense (e.g. each DB usually written by one thread) are cases that would be better off with OccValidationPolicy::kValidateSerial which doesn't use the buckets anyway.
* Allocate the mutexes in a contiguous array, for efficiency
* Add an option to ensure the mutexes are cache-aligned. In several other places we use cache-aligned mutexes but OptimisticTransactionDB historically does not. It should be a space-time trade-off the user can choose.
* Provide some visibility into the memory used by the mutex buckets with an ApproximateMemoryUsage() function (also used in unit testing)
* Share code with other users of "striped" mutexes, appropriate refactoring for customization & efficiency (e.g. using FastRange instead of modulus)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11439
Test Plan: unit tests added. Ran sized-up versions of stress test in unit test, including a before-and-after performance test showing no consistent difference. (NOTE: OptimisticTransactionDB not currently covered by db_stress!)
Reviewed By: ltamasi
Differential Revision: D45796393
Pulled By: pdillinger
fbshipit-source-id: ae2b3a26ad91ceeec15debcdc63ff48df6736a54
Summary:
Do not bother comparing the version of the local super version handle with the global one.
An inequality comparison result indicates nothing but a spurious obsoleteness. It only happens when the writer has increased the `ColumnFamilyData::super_version_number_`(5fc57eec2b/db/column_family.cc (L1309)) but has not yet called `ResetThreadLocalSuperVersions()`(5fc57eec2b/db/column_family.cc (L1328)) at the time when a reader reads the local handle(`void* ptr = local_sv_->Swap(SuperVersion::kSVInUse);`). In other words, the existence of a local handle is a sufficent evidence of its fressness.
With this PR, we save one or even two atomic instructions when getting a handle of super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11452
Reviewed By: ajkr
Differential Revision: D46059317
Pulled By: cbi42
fbshipit-source-id: 68b4b1ca8a9929a4aa470105c37a09e0625b014d
Summary:
Add a util method `HandleWriteBatchTimestampSizeDifference` to handle a `WriteBatch` read from WAL log when user-defined timestamp size record is written and read. Two check modes are added: `kVerifyConsistency` that just verifies the recorded timestamp size are consistent with the running ones. This mode is to be used by `db_impl_secondary` for opening a DB as secondary instance. It will also be used by `db_impl_open` before the user comparator switch support is added to make a column switch between enabling/disable UDT feature. The other mode `kReconcileInconsistency` will be used by `db_impl_open` later when user comparator can be changed.
Another change is to extract a method `CollectColumnFamilyIdsFromWriteBatch` in db_secondary_impl.h into its standalone util file so it can be shared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11451
Test Plan:
```
make check
./udt_util_test
```
Reviewed By: ltamasi
Differential Revision: D45894386
Pulled By: jowlyzhang
fbshipit-source-id: b96790777f154cddab6d45d9ba2e5d20ebc6fe9d
Summary:
We want to know more about opportunities for better range filters, and the effectiveness of our own range filters. Currently the stats are very limited, essentially logging just hits and misses against prefix filters for range scans in BLOOM_FILTER_PREFIX_* without tracking the false positive rate. Perhaps confusingly, when prefix filters are used for point queries, the stats are currently going into the non-PREFIX tickers.
This change does several things:
* Introduce new stat tickers for seeks and related filtering, \*LEVEL_SEEK\*
* Most importantly, allows us to see opportunities for range filtering. Specifically, we can count how many times a seek in an SST file accesses at least one data block, and how many times at least one value() is then accessed. If a data block was accessed but no value(), we can generally assume that the key(s) seen was(were) not of interest so could have been filtered with the right kind of filter, avoiding the data block access.
* We can get the same level of detail when a filter (for now, prefix Bloom/ribbon) is used, or not. Specifically, we can infer a false positive rate for prefix filters (not available before) from the seek "false positive" rate: when a data block is accessed but no value() is called. (There can be other explanations for a seek false positive, but in typical iterator usage it would indicate a filter false positive.)
* For efficiency, I wanted to avoid making additional calls to the prefix extractor (or key comparisons, etc.), which would be required if we wanted to more precisely detect filter false positives. I believe that instrumenting value() is the best balance of efficiency vs. accurately measuring what we are often interested in.
* The stats are divided between last level and non-last levels, to help understand potential tiered storage use cases.
* The old BLOOM_FILTER_PREFIX_* stats have a different meaning: no longer referring to iterators but to point queries using prefix filters. BLOOM_FILTER_PREFIX_TRUE_POSITIVE is added for computing the prefix false positive rate on point queries, which can be due to filter false positives as well as different keys with the same prefix.
* Similarly, the non-PREFIX BLOOM_FILTER stats are now for whole key filtering only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11460
Test Plan:
unit tests updated, including updating many to pop the stat value since last read to improve test
readability and maintainability.
Performance test shows a consistent small improvement with these changes, both with clang and with gcc. CPU profile indicates that RecordTick is using less CPU, and this makes sense at least for a high filter miss rate. Before, we were recording two ticks per filter miss in iterators (CHECKED & USEFUL) and now recording just one (FILTERED).
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
```
And run simultaneous before&after with
```
TEST_TMPDIR=/dev/shm ./db_bench -readonly -benchmarks=seekrandom[-X1000] -num=10000000 -bloom_bits=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -seek_nexts=1 -duration=20 -seed=43 -threads=8 -cache_size=1000000000 -statistics
```
Before: seekrandom [AVG 275 runs] : 189680 (± 222) ops/sec; 18.4 (± 0.0) MB/sec
After: seekrandom [AVG 275 runs] : 197110 (± 208) ops/sec; 19.1 (± 0.0) MB/sec
Reviewed By: ajkr
Differential Revision: D46029177
Pulled By: pdillinger
fbshipit-source-id: cdace79a2ea548d46c5900b068c5b7c3a02e5822
Summary:
Add two type aliases for Cache: BlockCache and GeneralCache, and add LRUCacheOptions::MakeSharedGeneralCache(). This will ease upgrade to an intended future change to separate the cache API between block cache and other (general) uses, including row cache. Separating the APIs will make it easier to expose more details of block caching for customization. For example, it would be nice to pass the file unique ID and offset as the logical cache key instead of using a Slice, which could facilitate some file-specific customizations in block cache. This would also make it clear that HyperClockCache is not usable as a general cache, because it can only deal with fixed-size block cache keys.
block_cache, row_cache, and blob_cache are the uses of Cache in the public API. blob_cache should be able to use BlockCache while row_cache is a GeneralCache user, as its keys are of arbitrary size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11450
Test Plan: see updated unit test.
Reviewed By: anand1976
Differential Revision: D45882067
Pulled By: pdillinger
fbshipit-source-id: ff5d9f0b644f87ae337a29a7728ce3ed07b2a4b2
Summary:
This PR is part of the request https://github.com/facebook/rocksdb/issues/11317.
(Another part is https://github.com/facebook/rocksdb/pull/11378)
ClipDB() will clip the entries in the CF according to the range [begin_key, end_key). All the entries outside this range will be completely deleted (including tombstones).
This feature is mainly used to ensure that there is no overlapping Key when calling CreateColumnFamilyWithImports() to import multiple CFs.
When Calling ClipDB [begin, end), there are the following steps
1. Quickly and directly delete files without overlap
DeleteFilesInRanges(nullptr, begin) + DeleteFilesInRanges(end, nullptr)
2. Delete the Key outside the range
Delete[smallest_key, begin) + Delete[end, largest_key]
3. Delete the tombstone through Manul Compact
CompactRange(option, nullptr, nullptr)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11379
Reviewed By: ajkr
Differential Revision: D45840358
Pulled By: cbi42
fbshipit-source-id: 54152e8a45fd8ede137f99787eb252f0b51440a4
Summary:
Context:
In pull request https://github.com/facebook/rocksdb/issues/11436, we are introducing a new public API `waitForCompact(const WaitForCompactOptions& wait_for_compact_options)`. This API invokes the internal implementation `waitForCompact(bool wait_unscheduled=false)`. The unscheduled parameter indicates the compactions that are not yet scheduled but are required to process items in the queue.
In certain cases, we are unable to wait for compactions, such as during a shutdown or when background jobs are paused. It is important to return the appropriate status in these scenarios. For all other cases, we should wait for all compaction and flush jobs, including the unscheduled ones. The primary purpose of this new API is to wait until the system has resolved its compaction debt. Currently, the usage of `wait_unscheduled` is limited to test code.
This pull request eliminates the usage of wait_unscheduled. The internal `waitForCompact()` API now waits for unscheduled compactions unless the db is undergoing a shutdown. In the event of a shutdown, the API returns `Status::ShutdownInProgress()`.
Additionally, a new parameter, `abort_on_pause`, has been introduced with a default value of `false`. This parameter addresses the possibility of waiting indefinitely for unscheduled jobs if `PauseBackgroundWork()` was called before `waitForCompact()` is invoked. By setting `abort_on_pause` to `true`, the API will immediately return `Status::Aborted`.
Furthermore, all tests that previously called `waitForCompact(true)` have been fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11443
Test Plan:
Existing tests that involve a shutdown in progress:
- DBCompactionTest::CompactRangeShutdownWhileDelayed
- DBTestWithParam::PreShutdownMultipleCompaction
- DBTestWithParam::PreShutdownCompactionMiddle
Reviewed By: pdillinger
Differential Revision: D45923426
Pulled By: jaykorean
fbshipit-source-id: 7dc93fe6a6841a7d9d2d72866fa647090dba8eae
Summary:
In IDE navigation I find it annoying that there are two statistics.h files (etc.) and often land on the wrong one. Here I migrate several headers to use the blah.h <- blah_impl.h <- blah.cc idiom. Although clang-format wants "blah.h" to be the top include for "blah.cc", I think overall this is an improvement.
No public API changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11408
Test Plan: existing tests
Reviewed By: ltamasi
Differential Revision: D45456696
Pulled By: pdillinger
fbshipit-source-id: 809d931253f3272c908cf5facf7e1d32fc507373
Summary:
When the DB is opened, RocksDB creates a temp OPTIONS file, writes the current options to it, and renames it. In case of a failure, the temp file is left behind, and is not deleted by PurgeObsoleteFiles(). Fix this by explicitly deleting the temp file if writing to it or renaming it fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11423
Test Plan: Add a unit test
Reviewed By: akankshamahajan15
Differential Revision: D45540454
Pulled By: anand1976
fbshipit-source-id: 47facdc30d8cc5667036312d04b21d3fc253c92e
Summary:
Added a ticker stat, `BLOCK_CHECKSUM_MISMATCH_COUNT`, to count how many block checksum verifications detected a mismatch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11438
Test Plan: new unit test
Reviewed By: pdillinger
Differential Revision: D45788179
Pulled By: ajkr
fbshipit-source-id: e2b44eba7c23b3e110ebe69eaa78a710dec2590f
Summary:
This patch adds support to write and read a user-defined timestamp size record in log writer and log reader. It will be used by WAL logs to persist the user-defined timestamp format for subsequent WriteBatch records. Reading and writing UDT sizes for WAL logs are not included in this patch. It will be in a follow up.
The syntax for the record is: at write time, one such record is added when log writer encountered any non-zero UDT size it hasn't recorded so far. At read time, all such records read up to a point are accumulated and applicable to all subsequent WriteBatch records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11433
Test Plan:
```
make clean && make -j32 all
./log_test --gtest_filter="*WithTimestampSize*"
```
Reviewed By: ltamasi
Differential Revision: D45678708
Pulled By: jowlyzhang
fbshipit-source-id: b770c8f45bb7b9383b14aac9f22af781304fb41d
Summary:
- Add a new option `CompactionOptionsFIFO::file_temperature_age_thresholds` that allows user to specify age thresholds for compacting files to different temperatures. File temperature can be used to store files in different storage media. The new options allows specifying multiple temperature-age pairs. The option uses struct for a temperature-age pair to use the existing parsing functionality to make the option dynamically settable.
- Deprecate the old option `age_for_warm` that was added for a similar purpose.
- Compaction score calculation logic is updated to check if a file needs to be compacted to change its temperature.
- Some refactoring is done in `FIFOCompactionPicker::PickTemperatureChangeCompaction`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11428
Test Plan: adapted unit tests that were for `age_for_warm` to this new option.
Reviewed By: ajkr
Differential Revision: D45611412
Pulled By: cbi42
fbshipit-source-id: 2dc384841f61cc04abb9681e31aa2de0f0b06106
Summary:
See motivation and description in new ShardedCacheOptions::hash_seed option.
Updated db_bench so that its seed param is used for the cache hash seed.
Made its code more safe to ensure seed is set before use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11391
Test Plan:
unit tests added / updated
**Performance** - no discernible difference seen running cache_bench repeatedly before & after. With lru_cache and hyper_clock_cache.
Reviewed By: hx235
Differential Revision: D45557797
Pulled By: pdillinger
fbshipit-source-id: 40bf4da6d66f9d41a8a0eb8e5cf4246a4aa07934
Summary:
Fix build error: variable 'base_level' may be uninitialized
```
db_impl_compaction_flush.cc:1195:21: error: variable 'base_level' may be uninitialized when used here [-Werror,-Wconditional-uninitialized]
level = base_level;
```
^~~~~~~~~~
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11435
Test Plan: CircleCI jobs
Reviewed By: cbi42
Differential Revision: D45708176
Pulled By: akankshamahajan15
fbshipit-source-id: 851b1205b22b63d728495e5735fa91b0ad8e012b
Summary:
**Context:**
We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics.
**Summary:**
- Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()`
- For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more.
- Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406
Test Plan:
1. New UT
2. db bench
Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison.
```
diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc
index bd5669f0f..791484c1f 100644
--- a/table/block_based/block_based_table_reader.cc
+++ b/table/block_based/block_based_table_reader.cc
@@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail(
&tail_prefetch_size);
// Try file system prefetch
- if (!file->use_direct_io() && !force_direct_prefetch) {
+ if (false && !file->use_direct_io() && !force_direct_prefetch) {
if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority)
.IsNotSupported()) {
prefetch_buffer->reset(new FilePrefetchBuffer(
diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc
index ea40f5fa0..39a0ac385 100644
--- a/tools/db_bench_tool.cc
+++ b/tools/db_bench_tool.cc
@@ -4191,6 +4191,8 @@ class Benchmark {
std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options));
} else {
BlockBasedTableOptions block_based_options;
+ block_based_options.metadata_cache_options.partition_pinning =
+ PinningTier::kAll;
block_based_options.checksum =
static_cast<ChecksumType>(FLAGS_checksum_type);
if (FLAGS_use_hash_search) {
```
Create DB
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
ReadRandom
```
./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none
```
(a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 3395
rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614
```
(b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies())
```
rocksdb.table.open.prefetch.tail.hit COUNT : 14257
rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540
```
As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR
3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR.
Reviewed By: pdillinger
Differential Revision: D45413346
Pulled By: hx235
fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064
Summary:
the test is flaky when compiled with `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`. The cause is that a manual compaction `CompactRange()` can finish and return before obsolete files are deleted. One reason for this is that a manual compaction waits until `manual.done` is set here 62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L1978)
and the compaction thread can set `manual.done`:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3672)
and then temporarily release mutex_:
62fc15f009/db/db_impl/db_impl_files.cc (L317)
before purging obsolete files:
62fc15f009/db/db_impl/db_impl_compaction_flush.cc (L3144)
With `COERCE_CONTEXT_SWITCH=1`, `bg_cv_.SignalAll()` is called during `mutex_.Lock()`, so the manual compaction thread can wake up and return before obsolete files are deleted. Updated the test to only count live SST files.
Also updated `FindObsoleteFiles()` to avoid locking a locked mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11412
Test Plan: `make -j56 COERCE_CONTEXT_SWITCH=1 ./db_universal_compaction_test`
Reviewed By: ajkr
Differential Revision: D45342242
Pulled By: cbi42
fbshipit-source-id: 955c9796aa3f484e3557d300f97cffacb3ed9b0c
Summary:
when I use g++-13 to exec the `make all` command, the output throws the warnings.
```
db/compaction/compaction_job_test.cc: In member function ‘void rocksdb::CompactionJobTestBase::AddMockFile(const rocksdb::mock::KVVector&, int)’:
db/compaction/compaction_job_test.cc:376:57: error: redundant move in initialization [-Werror=redundant-move]
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
db/compaction/compaction_job_test.cc:376:57: note: remove ‘std::move’ call
376 | env_, GenerateFileName(file_number), std::move(contents)));
| ~~~~~~~~~^~~~~~~~~~
db/compaction/compaction_job_test.cc:375:7: note: in expansion of macro ‘EXPECT_OK’
375 | EXPECT_OK(mock_table_factory_->CreateMockTable(
| ^~~~~~~~~
cc1plus: all warnings being treated as errors
make: *** [Makefile:2507: db/compaction/compaction_job_test.o] Error 1
```
and I also add some `(void)unused_variable` statements because of the cmake argument `-Wunused-but-set-variable -Wunused-but-set-variable`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11418
Reviewed By: akankshamahajan15
Differential Revision: D45528223
Pulled By: ajkr
fbshipit-source-id: fee1a77c30039a56b481de953f0a834cc788abbc
Summary:
When a DB is opened, RocksDB creates an empty WAL file. When the DB is reopened and the WAL is empty, the min log number to keep is not advanced until a memtable flush happens. If a process crashes soon after reopening the DB, its likely that no memtable flush would have happened, which means the empty WAL file is not deleted. In a crash loop scenario, this leads to empty WAL files accumulating. Fix this by ensuring the min log number is advanced if the WAL is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11409
Test Plan: Add a unit test
Reviewed By: ajkr
Differential Revision: D45281685
Pulled By: anand1976
fbshipit-source-id: 0225877c613e65ffb30972a0051db2830105423e
Summary:
For better clarity, encouraging more options explicitly specified using fields rather than positionally via constructor parameter lists. Simplifies code maintenance as new fields are added. Deprecate some cases of the confusing pattern of NewWhatever() functions returning shared_ptr.
Net reduction of about 70 source code lines (including comments).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11386
Test Plan: existing tests
Reviewed By: ajkr
Differential Revision: D45059075
Pulled By: pdillinger
fbshipit-source-id: d53fa09b268024f9c55254bb973b6c69feebf41a
Summary:
add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are
1. checksum construction and verification in block.cc/h
2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h)
3. unit tests/crash test updates
Tests:
* Added unit tests
* Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576`
Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled.
Performance:
Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory.
For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates):
```
SETUP
make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench
./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none
BENCHMARK
./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE
The readrandom ops/sec looks like the following:
Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB
Main 240805 223604 198176 161653 139040
PR prot_bytes=0 238691 226693 200127 161082 141153
PR prot_bytes=1 214983 193199 178532 137013 108211
prot_bytes=1 vs -10% -15% -10.8% -15% -23%
prot_bytes=0
```
The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287
Reviewed By: ajkr
Differential Revision: D43970708
Pulled By: cbi42
fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
Summary:
Tweak some bounds and things, and reduce risk of surprise results by running on all supported compressions (mostly).
Also improves the precise compressibility of CompressibleString by using RandomBinaryString.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11396
Test Plan: updated tests
Reviewed By: ltamasi
Differential Revision: D45211938
Pulled By: pdillinger
fbshipit-source-id: 9dc1dd8574a60a9364efe18558be66d31a35598b
Summary:
## Option API updates
* Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7.
* Remove unnecessary constructor for CompressionOptions.
* Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated).
## Stat API updates
* Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed.
* Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing.
* New or existing tickers relevant to compression:
* BYTES_COMPRESSED_FROM
* BYTES_COMPRESSED_TO
* BYTES_COMPRESSION_BYPASSED
* BYTES_COMPRESSION_REJECTED
* COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing)
* NUMBER_BLOCK_COMPRESSED (existing)
* NUMBER_BLOCK_COMPRESSION_BYPASSED
* NUMBER_BLOCK_COMPRESSION_REJECTED
* BYTES_DECOMPRESSED_FROM
* BYTES_DECOMPRESSED_TO
We can compute a number of things with these stats:
* "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO
* Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED)
* Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED
* Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES
Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression.
## BlockBasedTableBuilder
Various small refactorings, optimizations, and name clean-ups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388
Test Plan:
unit tests added
* `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field.
Reviewed By: ajkr
Differential Revision: D45128202
Pulled By: pdillinger
fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
Summary:
during manual compaction (CompactRange()), L0->L1 trivial move is disabled when only L0 overlaps with compacting key range (introduced in https://github.com/facebook/rocksdb/issues/7368 to enforce kForce* contract). This can cause large memory usage due to compaction readahead when number of L0 files is large. This PR allows L0->L1 trivial move in this case, and will do a L1 -> L1 intra-level compaction when needed (`bottommost_level_compaction` is kForce*). In brief, consider a DB with only L0 file, and user calls CompactRange(kForce, nullptr, nullptr),
- before this PR, RocksDB does a L0 -> L1 compaction (disallow trivial move),
- after this PR, RocksDB does a L0 -> L1 compaction (allow trivial move), and a L1 -> L1 compaction.
Users can use kForceOptimized to avoid this extra L1->L1 compaction overhead when L0s are overlapping and cannot be trivial moved.
This PR also fixed a bug (see previous discussion in https://github.com/facebook/rocksdb/issues/11041) where `final_output_level` of a manual compaction can be miscalculated when `level_compaction_dynamic_level_bytes=true`. This bug could cause incorrect level being moved when CompactRangeOptions::change_level is specified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11375
Test Plan: - Added new unit tests to test that L0 -> L1 compaction allows trivial move and L1 -> L1 compaction is done when needed.
Reviewed By: ajkr
Differential Revision: D44943518
Pulled By: cbi42
fbshipit-source-id: e9fb770d17b163c18a623e1d1bd6b81159192708
Summary:
This test exhibited the following flaky failure:
```
db/db_write_test.cc:653: Failure
db_->Resume()
Corruption: Not active
```
I was able to repro it by applying the following patch to coerce a specific race condition:
```
diff --git a/db/db_write_test.cc b/db/db_write_test.cc
index d82c57376..775ba3cde 100644
--- a/db/db_write_test.cc
+++ b/db/db_write_test.cc
@@ -636,6 +636,10 @@ TEST_P(DBWriteTest, LockWALInEffect) {
ASSERT_TRUE(dbfull()->WALBufferIsEmpty());
ASSERT_OK(db_->UnlockWAL());
+ // Test thread: sleep interval: [0, 3)
+ // In this interval, the file system is active
+ sleep(3);
+
// Fail the WAL flush if applicable
fault_fs->SetFilesystemActive(false);
Status s = Put("key2", "value");
@@ -649,6 +653,11 @@ TEST_P(DBWriteTest, LockWALInEffect) {
ASSERT_OK(db_->LockWAL());
ASSERT_OK(db_->UnlockWAL());
}
+
+ // Test thread: sleep interval: [3, 6)
+ // In this interval, the file system is inactive
+ sleep(3);
+
fault_fs->SetFilesystemActive(true);
ASSERT_OK(db_->Resume());
// Writes should work again
diff --git a/db/flush_job.cc b/db/flush_job.cc
index 8193f594f..602ee2c9f 100644
--- a/db/flush_job.cc
+++ b/db/flush_job.cc
@@ -979,6 +979,10 @@ Status FlushJob::WriteLevel0Table() {
DirFsyncOptions(DirFsyncOptions::FsyncReason::kNewFileSynced));
}
TEST_SYNC_POINT_CALLBACK("FlushJob::WriteLevel0Table", &mems_);
+ // Flush thread: sleep interval: [0, 4)
+ // Upon awakening, the file system will be inactive. Then the MANIFEST
+ // update will fail.
+ sleep(4);
db_mutex_->Lock();
}
base_->Unref();
```
The fix for this scenario is explained in the code change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11382
Reviewed By: cbi42
Differential Revision: D45027632
Pulled By: ajkr
fbshipit-source-id: 6bfa35a5781c0c080fb74e13f2b2c9f871f7effb
Summary:
In CircleCI build-linux-arm-test-full job (https://app.circleci.com/pipelines/github/facebook/rocksdb/26462/workflows/a9d39d2c-c970-4b0f-9c10-7743beb9771b/jobs/591722), this test exhibited the following flaky failure:
```
db/db_bloom_filter_test.cc:2506: Failure
Expected: (TestGetTickerCount(options, BLOOM_FILTER_USEFUL)) > (65000 * 2), actual: 120558 vs 130000
```
I ssh'd to an instance and observed it cuts memtables at slightly different points across runs. Logging in `ConcurrentArena` pointed to `try_lock()` returning false at different points across runs.
This PR changes the approach to allow a fixed number of keys per memtable flush. I verified the bloom filter useful count is deterministic now even on the CircleCI ARM instance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11383
Reviewed By: cbi42
Differential Revision: D45036829
Pulled By: ajkr
fbshipit-source-id: b602dacb63955f1af09bf0ed409cde0552805a08
Summary:
When calculating the largest_key in ImportColumnFamilyJob::GetIngestedFileInfo, only the first element of range_del_iter is calculated. If range_del_iter has multiple elements, the largest_key will be wrong
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11381
Reviewed By: cbi42
Differential Revision: D44981450
Pulled By: ajkr
fbshipit-source-id: 584bc7da86295568a96984d2951644f289e578c7
Summary:
Before this PR, in `LevelCompactionBuilder::TryExtendNonL0TrivialMove(index)`, we start from a file at index and expand the compaction input towards right to find files to trivial move. This PR adds the logic to also expand towards left.
Another major change made in this PR is to not expand L0 files through `TryExtendNonL0TrivialMove()`. This happens currently when compacting L0 files to an empty output level. The condition for expanding files in `TryExtendNonL0TrivialMove()` is to check atomic boundary, which does not take into account that L0 files can overlap in key range and are not sorted in key order. So it may include more L0 files than needed and disallow a trivial move. This change is included in this PR so that we don't make it worse by always expanding L0 in both direction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11347
Test Plan:
* new unit test
* Benchmark does not show obvious improvement or regression:
```
Write sequentially
./db_bench --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=1000000 --num=100000000 --value_size=100 -level_compaction_dynamic_level_bytes --target_file_size_base=7340032 --max_bytes_for_level_base=16777216
Main:
fillseq : 4.726 micros/op 211592 ops/sec 472.607 seconds 100000000 operations; 23.4 MB/s
This PR:
fillseq : 4.755 micros/op 210289 ops/sec 475.534 seconds 100000000 operations; 23.3 MB/s
Write randomly
./db_bench --benchmarks=fillrandom --compression_type=lz4 --write_buffer_size=1000000 --num=100000000 --value_size=100 -level_compaction_dynamic_level_bytes --target_file_size_base=7340032 --max_bytes_for_level_base=16777216
Main:
fillrandom : 16.351 micros/op 61159 ops/sec 1635.066 seconds 100000000 operations; 6.8 MB/s
This PR:
fillrandom : 15.798 micros/op 63298 ops/sec 1579.817 seconds 100000000 operations; 7.0 MB/s
```
Reviewed By: ajkr
Differential Revision: D44645650
Pulled By: cbi42
fbshipit-source-id: 8631f3a6b3f01decbbf18c34f2b62833cb4f9733
Summary:
**Context/Summary:**
ASSERT_EQ will only verify the code of Status, but will not check the state message of Status.
- Assert by checking Status state in `ImportColumnFamilyTest`
- Forgot to set db_comparator_name when creating ExportImportFilesMetaData in `ImportColumnFamilyNegativeTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11372
Reviewed By: ajkr
Differential Revision: D45004343
Pulled By: cbi42
fbshipit-source-id: a13d45521df17ead3d6d4c1c1fe1e4c95397ce8b
Summary:
Makes it easier to use generated Rust bindings. Constness of these is already part of the C++ API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11243
Reviewed By: hx235
Differential Revision: D44840394
Pulled By: ajkr
fbshipit-source-id: bcd1aeb8c959c304148d25b00043bb8c4cd3e0a4
Summary:
If RocksDB enables user-defined timestamp, then RocksDB read path can filter table files by the min/max timestamps of each file. If application wants to lookup a key that is the most recent and visible to a certain timestamp ts, then we can compare ts with the min_ts of each file. If ts < min_ts, then we know all keys in the file is not visible at time ts, then we do not have to open the file. This can also save an IO.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11332
Reviewed By: pdillinger
Differential Revision: D44763497
Pulled By: guowentian
fbshipit-source-id: abde346b9f18480fe03c04e4006e7d62aa9c22a8
Summary:
When a user migrates to level compaction + `level_compaction_dynamic_level_bytes=true`, or when a DB shrinks, there can be unnecessary levels in the DB. Before this PR, this is no way to remove these levels except a manual compaction. These extra unnecessary levels make it harder to guarantee max_bytes_for_level_multiplier and can cause extra space amp. This PR boosts compaction score for these levels to allow RocksDB to automatically drain these levels. Together with https://github.com/facebook/rocksdb/issues/11321, this makes migration to `level_compaction_dynamic_level_bytes=true` automatic without needing user to do a one time full manual compaction. Credit: this PR is modified from https://github.com/facebook/rocksdb/issues/3921.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11340
Test Plan:
- New unit tests
- `python3 tools/db_crashtest.py whitebox --simple` which randomly sets level_compaction_dynamic_level_bytes in each run.
Reviewed By: ajkr
Differential Revision: D44563884
Pulled By: cbi42
fbshipit-source-id: e20d3620bd73dff22be18c5a91a07f340740bcc8
Summary:
VerifyFileChecksums currently interprets the readahead_size as a payload of readahead_size for calculating the checksum, plus a prefetch of an additional readahead_size. Hence each read is readahead_size * 2. This change treats it as chunks of readahead_size for checksum calculation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11328
Test Plan: Add a unit test
Reviewed By: pdillinger
Differential Revision: D44718781
Pulled By: anand1976
fbshipit-source-id: 79bae1ebaa27de2a13bc86f5910bf09356936e63
Summary:
**Context/Summary:**
- Allow runtime changes to whether `WriteBufferManager` allows stall or not by calling `SetAllowStall()`
- Misc: some clean up - see PR conversation
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11335
Test Plan: - New UT
Reviewed By: akankshamahajan15
Differential Revision: D44502555
Pulled By: hx235
fbshipit-source-id: 24b5cc57df7734b11d42e4870c06c87b95312b5e
Summary:
**Context/Summary:**
Motived by user need of investigating db iterator behavior during an interval of any time length of a certain thread, we decide to collect and expose related counters in `PerfContext` as an experimental feature, in addition to the existing db-scope ones (i.e, tickers)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11320
Test Plan:
- new UT
- db bench
Setup
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=1000000 -compression_type=none -bloom_bits=3
```
Test till converges
```
./db_bench -seed=1679526311157283 -use_existing_db=1 -perf_level=2 -db=/dev/shm/testdb/ -benchmarks="seekrandom[-X60]"
```
pre-change
`seekrandom [AVG 33 runs] : 7545 (± 100) ops/sec`
post-change (no regression)
`seekrandom [AVG 33 runs] : 7688 (± 67) ops/sec`
Reviewed By: cbi42
Differential Revision: D44321931
Pulled By: hx235
fbshipit-source-id: f98a254ba3e3ced95eb5928884e33f1b99dca401
Summary:
…evel_bytes
During DB open, if a column family uses level compaction with level_compaction_dynamic_level_bytes=true, trivially move its files down in the LSM such that the bottommost files are in Lmax, the second from bottommost level files are in Lmax-1 and so on. This is aimed to make it easier to migrate level_compaction_dynamic_level_bytes from false to true. Before this change, a full manual compaction is suggested for such migration. After this change, user can just restart DB to turn on this option. db_crashtest.py is updated to randomly choose value for level_compaction_dynamic_level_bytes.
Note that there may still be too many unnecessary levels if a user is migrating from universal compaction or level compaction with a smaller level multiplier. A full manual compaction may still be needed in that case before some PR that automatically drain unnecessary levels like https://github.com/facebook/rocksdb/issues/3921 lands. Eventually we may want to change the default value of option level_compaction_dynamic_level_bytes to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11321
Test Plan:
1. Added unit tests.
2. Crash test: ran a variation of db_crashtest.py (like 32516507e77521ae887e45091b69139e32e8efb7) that turns level_compaction_dynamic_level_bytes on and off and switches between LC and UC for the same DB.
TODO: Update `OptionChangeMigration`, either after this PR or https://github.com/facebook/rocksdb/issues/3921.
Reviewed By: ajkr
Differential Revision: D44341930
Pulled By: cbi42
fbshipit-source-id: 013de19a915c6a0502be569f07c4cc8f1c3c6be2
Summary:
In DBCompactionTest::CancelCompactionWaitingOnConflict, when generating SST files to trigger a compaction, we don't wait after each file, which may cause multiple memtables going to the same SST file, causing insufficient files to trigger the compaction. We do the waiting instead, except the last one, which would trigger compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11318
Test Plan: Run DBCompactionTest.CancelCompactionWaitingOnConflict multiple times.
Reviewed By: ajkr
Differential Revision: D44267273
fbshipit-source-id: 86af49b05fc67ea3335312f0f5f3d22df1520bf8
Summary:
Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key.
This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places.
It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct.
## cache.h (public API)
Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache.
## advanced_cache.h (advanced public API)
* Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it.
* Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper.
These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations.
* Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle)
I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss.
## cacheable_entry.h
A couple of functions are obsolete because Cache::Handle can no longer be pending.
## cache.cc
Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches.
## secondary_cache_adapter.{h,cc}
The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code.
## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc
Simply updated for Cache API changes.
## lru_cache.{h,cc}
Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality.
## clock_cache.{h,cc}
Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring.
## block_based_table_reader*
Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready.
Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse).
Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait.
## Intended follow-up work
* Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet
* Stacked secondary caches (see above discussion)
* See if we can make up for the small MultiGet performance regression.
* Study more performance with SecondaryCache
* Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal.
* Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup.
* Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301
Test Plan:
## Unit tests
Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them.
## Crash/stress test
Updated to use the new combination.
## Performance
First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0.
```
(while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }'
```
**Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type:
HyperClockCache: 3168662 (average parallel ops/sec)
LRUCache: 2940127
**After** this and #11299, running for about an hour:
HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower)
LRUCache: 2940928 (0.03% faster)
This is an acceptable difference IMHO.
Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits.
Create DB and test (before and after tests running simultaneously):
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec
multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec
So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache:
**Before**:
multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec
multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec
**After**:
multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec
multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec
Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately.
Let's also look at Get() in db_bench:
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16
```
**Before**:
readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec
readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec
**After**:
readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec
readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec
That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement:
**Before**:
readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec
readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec
**After**:
readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec
readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec
Reviewed By: ltamasi
Differential Revision: D44177044
Pulled By: pdillinger
fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
Summary:
In PosixFileSystem, IO uring support is opt-in. If the support is not enabled by the user, then ignore the async_io ReadOption in MultiGet and iteration at the top, rather than follow the async_io codepath and transparently switch to sync IO at the FileSystem layer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11296
Test Plan: Add new unit tests
Reviewed By: akankshamahajan15
Differential Revision: D44045776
Pulled By: anand1976
fbshipit-source-id: a0881bf763ca2fde50b84063d0068bb521edd8b9
Summary:
In preparation for factoring secondary cache support out of individual Cache implementations, we can get rid of the "in secondary cache" flag on entries through a workable hack: when an entry is promoted from secondary, it is inserted in primary using a helper that lacks secondary cache support, thus preventing re-insertion into secondary cache through existing logic.
This adds to the complexity of building CacheItemHelpers, because you always have to be able to get to an equivalent helper without secondary cache support, but that complexity is reasonably isolated within RocksDB typed_cache.h and test code.
gcc-7 seems to have problems with constexpr constructor referencing `this` so removed constexpr support on CacheItemHelper.
Also refactored some related test code to share common code / functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11299
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D44101453
Pulled By: pdillinger
fbshipit-source-id: 7a59d0a3938ee40159c90c3e65d7004f6a272345
Summary:
... ahead of a larger change.
* Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache`
* Unify naming of "standalone" block cache entries (was "detached" in clock_cache)
* Remove some unused definitions in clock_cache.h (leftover from a previous revision)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291
Test Plan: usual tests and CI, no behavior changes
Reviewed By: anand1976
Differential Revision: D43984642
Pulled By: pdillinger
fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97
Summary:
**Context:**
Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes .
```
./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 10
kill $pid
sleep 0.2
./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 40
kill $pid
sleep 0.2
Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound:
Crash-recovery verification failed :(
No writes or ops?
Verification failed :(
```
The bug is due to the following:
- When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`.
- But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N.
- However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M.
**Summary:**
- Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`.
- For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148
Test Plan:
- New unit test failed before the fix and passes after
- Make check
- Rehearsal stress test
Reviewed By: ajkr
Differential Revision: D42799871
Pulled By: hx235
fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
Summary:
In rare cases seeing failures like this
```
[ RUN ] DBWriteTestInstance/DBWriteTest.LockWALInEffect/2
db/db_write_test.cc:653: Failure
Put("key3", "value")
Corruption: Not active
```
in a test with no explicit threading. This is likely because of the unpredictability of background auto-resume. I didn't really know this feature, in part because DB::Resume() was undocumented. So I believe I have fixed the test and documented the API function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11290
Test Plan: 1000s of stress runs of the test with gtest-parallel
Reviewed By: anand1976
Differential Revision: D43984583
Pulled By: pdillinger
fbshipit-source-id: d30dec120b4864e193751b2e33ff16834d313db3
Summary:
CreateColumnFamilyWithImport() did not support range tombstones for two reasons:
1. it uses point keys of a input file to determine its boundary (smallest and largest internal key), which means range tombstones outside of the point key range will be effectively dropped.
2. it does not handle files with no point keys.
Also included a fix in external_sst_file_ingestion_job.cc where the blocks read in `GetIngestedFileInfo()` can be added to block cache now (issue fixed in https://github.com/facebook/rocksdb/pull/6429).
This PR adds support for exporting and importing column family with range tombstones. The main change is to add smallest internal key and largest internal key to `SstFileMetaData` that will be part of the output of `ExportColumnFamily()`. Then during `CreateColumnFamilyWithImport(...,const ExportImportFilesMetaData& metadata,...)`, file boundaries can be set from `metadata` directly. This is needed since when file boundaries are extended by range tombstones, sometimes they cannot be deduced from a file's content alone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11252
Test Plan:
- added unit tests that fails before this change
Closes https://github.com/facebook/rocksdb/issues/11245
Reviewed By: ajkr
Differential Revision: D43577443
Pulled By: cbi42
fbshipit-source-id: 6bff78e583cc50c44854994dea0a8dd519398f2f
Summary:
The existing PerfContext counter `internal_merge_count` only tracks the
Merge operands applied during range scans. The patch adds a new counter
called `internal_merge_count_point_lookups` to track the same metric
for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and
also fixes a couple of cases in the iterator where the existing counter wasn't
updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284
Test Plan: `make check`
Reviewed By: jowlyzhang
Differential Revision: D43926082
Pulled By: ltamasi
fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
Summary:
`BlobSourceCacheReservationTest.IncreaseCacheReservationOnFullCache` is both flaky and also doesn't do what its name says. The patch changes this test so it actually tests increasing the cache reservation, hopefully also deflaking it in the process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11273
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43800935
Pulled By: ltamasi
fbshipit-source-id: 5eb54130dfbe227285b0e14f2084aa4b89f0b107
Summary:
Hi. :) Noticed we are copying ColumnFamilyDescriptor here because my process crashed during copy constructor (cause unrelated)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10978
Reviewed By: cbi42
Differential Revision: D41473924
Pulled By: ajkr
fbshipit-source-id: 58a3473f2d7b24918f79d4b2726c20081c5e95b4
Summary:
During backward iteration, blob verification would fail because the user key (ts included) in `saved_key_` doesn't match the blob. This happens because during`FindValueForCurrentKey`, `saved_key_` is not updated when the user key(ts not included) is the same for all cases except when `timestamp_lb_` is specified. This breaks the blob verification logic when user defined timestamp is enabled and `timestamp_lb_` is not specified. Fix this by always updating `saved_key_` when a smaller user key (ts included) is seen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11258
Test Plan:
`make check`
`./db_blob_basic_test --gtest_filter=DBBlobWithTimestampTest.IterateBlobs`
Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced with:
`./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5`
Baseline:
- seekrandom [AVG 6 runs] : 72188 (± 1481) ops/sec; 37.2 (± 0.8) MB/sec
With this PR:
- seekrandom [AVG 6 runs] : 74171 (± 1427) ops/sec; 38.2 (± 0.7) MB/sec
Reviewed By: ltamasi
Differential Revision: D43675642
Pulled By: jowlyzhang
fbshipit-source-id: 8022ae8522d1f66548821855e6eed63640c14e04
Summary:
This makes it possible to eliminate some copies in `GetEntity` / `MultiGetEntity`,
in particular when `Merge`s or blobs are involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11248
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43544215
Pulled By: ltamasi
fbshipit-source-id: bc4c8955a24bbd8bc4ab098e72133ead757f9707
Summary:
A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)).
The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113
Test Plan:
* added unit test in db_range_del_test
* crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10`
Reviewed By: ajkr
Differential Revision: D42655709
Pulled By: cbi42
fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
Summary:
Fix complain
```
db/db_impl/db_impl_compaction_flush.cc:417:19: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:417:8: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
db/db_impl/db_impl_compaction_flush.cc:2911:21: error: loop variable 'bg_flush_arg' of type 'const rocksdb::DBImpl::BGFlushArg' creates a copy from type
'const rocksdb::DBImpl::BGFlushArg' [-Werror,-Wrange-loop-analysis]
for (const auto bg_flush_arg : bg_flush_args) {
^
db/db_impl/db_impl_compaction_flush.cc:2911:10: note: use reference type 'const rocksdb::DBImpl::BGFlushArg &' to prevent copying
for (const auto bg_flush_arg : bg_flush_args) {
^~~~~~~~~~~~~~~~~~~~~~~~~
&
```
from
```sh
xxx@MacBook-Pro / % g++ -v
Configured with: --prefix=/Library/Developer/CommandLineTools/usr --with-gxx-include-dir=/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/c++/4.2.1
Apple clang version 12.0.0 (clang-1200.0.32.29)
Target: x86_64-apple-darwin21.6.0
Thread model: posix
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11240
Reviewed By: cbi42
Differential Revision: D43458729
Pulled By: ajkr
fbshipit-source-id: 26e110f83451509463a1bc308f737ccb693c9f45
Summary:
in DBIter::SeekToLast(), key() can be called when iter is invalid and fails the following assertion:
```
./db/db_iter.h:153: virtual rocksdb::Slice rocksdb::DBIter::key() const: Assertion `valid_' failed.
```
This happens when `iterate_upper_bound` and timestamp_lb_ are set. SeekForPrev(*iterate_upper_bound_) positions the iterator on the same user key as *iterate_upper_bound_. A subsequent PrevInternal() call makes the iterator invalid just be the call to key().
This PR fixes this issue by setting updating the seek key to have max sequence number AND max timestamp when the seek key has the same user key as *iterate_upper_bound_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11223
Test Plan: - Added a unit test that would fail the above assertion before this fix.
Reviewed By: jowlyzhang
Differential Revision: D43283600
Pulled By: cbi42
fbshipit-source-id: 0dd3999845b722584679bbc95be2664b266005ba
Summary:
This PR adds support to the c-api bindings for calling `Flush()` with multiple column families, which is useful for performing atomic flushes (assuming also that the db has been opened with `atomic_flush = true`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11112
Reviewed By: cbi42
Differential Revision: D42666382
Pulled By: ajkr
fbshipit-source-id: 82f05bf32d28452d85c79ea42411c8fea961fd87
Summary:
The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required.
Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203
Reviewed By: cbi42
Differential Revision: D43160255
Pulled By: pdillinger
fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
Summary:
From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions.
This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231
Test Plan: updated unit test
Reviewed By: akankshamahajan15
Differential Revision: D43396607
Pulled By: ajkr
fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.
Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43256950
Pulled By: ltamasi
fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
Summary:
The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment.
In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544
Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it.
Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192
Test Plan: `make check`
Reviewed By: anand1976
Differential Revision: D43055487
Pulled By: pdillinger
fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
Summary:
Example failure:
```
[ RUN ] DBWriteTestInstance/DBWriteTest.LockWALInEffect/1
db/db_write_test.cc:646: Failure
Put("key3", "value")
Corruption: Not active
```
Presumably from a background compaction prior to Put.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11209
Test Plan: watch CI
Reviewed By: akankshamahajan15
Differential Revision: D43147727
Pulled By: pdillinger
fbshipit-source-id: a1c34ac5ab124bfe2f23205a30777990056e9082
Summary:
Fix a bug in the calculation of the input buffer address/offset in log_reader.cc. The bug is when consecutive fragments of a compressed record are located at the same offset in the log reader buffer, the second fragment input buffer is treated as a leftover from the previous input buffer. As a result, the offset in the `ZSTD_inBuffer` is not reset.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11198
Test Plan: Add a unit test in log_test.cc that fails without the fix and passes with it.
Reviewed By: ajkr, cbi42
Differential Revision: D43102692
Pulled By: anand1976
fbshipit-source-id: aa2648f4802c33991b76a3233c5a58d4cc9e77fd
Summary:
The patch adds compaction filter support for wide-column entities by introducing
a new `CompactionFilter` API called `FilterV3`. This API is called for regular
key-values, merge operands, and wide-column entities as well. It is passed the
existing value/operand or wide-column structure and it can update the value or
columns or keep/delete/etc. the key-value as usual. For compatibility, the default
implementation of `FilterV3` keeps all wide-column entities and falls back to calling
`FilterV2` for plain old key-values and merge operands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11196
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43094147
Pulled By: ltamasi
fbshipit-source-id: 75acabe9a35254f7f404ba6173ee9c2774382ebd
Summary:
This option has long been intended to be set to false by default and deprecated. It might never be practical to completely remove the feature, so that we can continue to test for backward compatibility by keeping the ability to generate DBs in the old way.
Also improved API comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11179
Test Plan: existing tests (with one tiny update)
Reviewed By: hx235
Differential Revision: D42973927
Pulled By: pdillinger
fbshipit-source-id: e9bc161cb933266e094aea2dff8cc03753c39dab
Summary:
Fixes https://github.com/facebook/rocksdb/issues/11160
By counting the number of stalls placed on a write queue, we can check in UnlockWAL() whether the stall present at the start of UnlockWAL() has been cleared by the end, or wait until it's cleared.
More details in code comments and new unit test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11172
Test Plan: unit test added. Yes, it uses sleep to amplify failure on buggy behavior if present, but using a sync point to only allow new behavior would fail with the old code only because it doesn't contain the new sync point. Basically, using a sync point in UnlockWAL() could easily mask a regression by artificially limiting key behaviors. The test would only check that UnlockWAL() invokes code that *should* do the right thing, without checking that it *does* the right thing.
Reviewed By: ajkr
Differential Revision: D42894341
Pulled By: pdillinger
fbshipit-source-id: 15c9da0ca383e6aec845b29f5447d76cecbf46c3
Summary:
Currently, we incorrectly return a Status::Corruption to the MultiGet caller if the file system ReadAsync cannot issue a read and returns an error for some reason, such as IOStatus::NotSupported(). In this PR, we copy the ReadAsync error to the request status so it can be returned to the user.
Tests:
Update existing unit tests and add a new one for this scenario
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11171
Reviewed By: akankshamahajan15
Differential Revision: D42950057
Pulled By: anand1976
fbshipit-source-id: 85ffcb015fa6c064c311f8a28488fec78c487869
Summary:
The patch makes some code quality enhancements in `CompactionIterator::InvokeFilterIfNeeded`
including the renaming of `filter` (which is most likely a remnant of the days before the `FilterV2`
API when the compaction filter used to return a boolean) to `decision`, the removal of some
outdated comments, the elimination of an `error` flag which was only used in one failure case
out of many, as well as some small stylistic improvements. (Some the above will also come in
handy when adding compaction filter support for wide-column entities.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11174
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42901408
Pulled By: ltamasi
fbshipit-source-id: ab382d59a4990c5dfe1cee219d49e1d80902b666
Summary:
This PR adds logic to the `RunManualCompaction()` loop to check for cancellation before waiting on any conflicting compactions to finish. In case of cancellation, `RunManualCompaction()` no longer waits on conflicting compactions
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11165
Test Plan: repro test case
Reviewed By: cbi42
Differential Revision: D42864058
Pulled By: ajkr
fbshipit-source-id: ea4dd1a8f294abe212905495a8fbe8f07fca3f5a
Summary:
The patch fixes a feature interaction bug between BlobDB and the `GetEntity` API:
without the patch, `GetEntity` would return the blob reference (wrapped into a
single-column entity) instead of the actual blob value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11162
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42854092
Pulled By: ltamasi
fbshipit-source-id: f750d0ff57def107da16f545077ddce9860ff21a
Summary:
The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change:
* Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use.
* Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions)
* Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability)
* Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other.
* Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads.
* Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143
Test Plan: unit tests added / updated, added to stress/crash test
Reviewed By: ajkr
Differential Revision: D42848627
Pulled By: pdillinger
fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4
Summary:
Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller.
Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105
Test Plan:
make V=1 db_blob_basic_test
./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*"
Reviewed By: ltamasi
Differential Revision: D42716487
Pulled By: jowlyzhang
fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11136
Test Plan: the provided unit test used to fail due to `GetMergeOperands()` returning `Status::MergeInProgress()`; it passes now because the `GetMergeOperands()` call returns `Status::OK()`
Reviewed By: pdillinger
Differential Revision: D42759198
Pulled By: ajkr
fbshipit-source-id: 878f9f40ccc1d7e2fe7b1352814bae3a49c19939
Summary:
Migrate derived classes from EnvWrapper to FileSystemWrapper so we can eventually deprecate the storage methods in Env.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11125
Test Plan: CircleCI jobs
Reviewed By: anand1976
Differential Revision: D42732241
Pulled By: akankshamahajan15
fbshipit-source-id: c89a70a79fcfb13e158bf8919b1a87a9de133222
Summary:
PR https://github.com/facebook/rocksdb/issues/11020 fixed a case where it was easy to deadlock the DB with LockWAL() but introduced a bug showing up as a rare assertion failure in the stress test. Specifically, `assert(w->state == STATE_INIT)` in `WriteThread::LinkOne()` called from `BeginWriteStall()`, `DelayWrite()`, `WriteImplWALOnly()`. I haven't been about to generate a unit test that reproduces this failure but I believe the root cause is that DelayWrite() was never meant to be re-entrant, only called from the DB's write_thread_ leader. https://github.com/facebook/rocksdb/issues/11020 introduced a call to DelayWrite() from the nonmem_write_thread_ group leader.
This fix is to make DelayWrite() apply to the specific write queue that it is being called from (inject a dummy write stall entry to the head of the appropriate write queue). WriteController is re-entrant, based on polling and state changes signalled with bg_cv_, so can manage stalling two queues. The only anticipated complication (called out by Andrew in previous PR) is that we don't want timed write delays being injected in parallel for the two queues, because that dimishes the intended throttling effect. Thus, we only allow timed delays for the primary write queue.
HISTORY not updated because this is intended for the same release where the bug was introduced.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11130
Test Plan:
Although I was not able to reproduce the assertion failure, I was able to reproduce a distinct flaw with what I believe is the same root cause: a kind of deadlock if both write queues need to wake up from stopped writes. Only one will be waiting on bg_cv_ (the other waiting in `LinkOne()` for the write queue to open up), so a single SignalAll() will only unblock one of the queues, with the other re-instating the stop until another signal on bg_cv_. A simple unit test is added for this case.
Will also run crash_test_with_multiops_wc_txn for a while looking for issues.
Reviewed By: ajkr
Differential Revision: D42749330
Pulled By: pdillinger
fbshipit-source-id: 4317dd899a93d57c26fd5af7143038f82d4d4d1b
Summary:
Migrate ErrorEnv from EnvWrapper to FileSystemWrapper so we can eventually deprecate the storage methods in Env.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11124
Reviewed By: akankshamahajan15
Differential Revision: D42727791
Pulled By: anand1976
fbshipit-source-id: e8362ad624dc28e55c99fc35eda12866755f62c6
Summary:
Compressed block cache is replaced by compressed secondary cache. Remove the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117
Test Plan: See CI passes
Reviewed By: pdillinger
Differential Revision: D42700164
fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d
Summary:
Capture more of the original intent at a high level, without getting bogged down in low-level details.
The old text made some weak promises about handling of LOCK files. There should be no specific concern for LOCK files, because we already rely on LockFile() to create the file if it's not present already. And the lock file is generally size 0, so don't have to worry about truncation. Added a unit test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11085
Test Plan: existing tests, and a new one.
Reviewed By: siying
Differential Revision: D42713233
Pulled By: pdillinger
fbshipit-source-id: 2fce7c974d35fac065037c9c4c7326a59c9fe340
Summary:
**Context:**
Concurrent flushes on the same CF can set on `ColumnFamilyData::flush_reason` before each other flush finishes. An symptom is one CF has different flush_reason with others though all of them are in an atomic flush `db_stress: db/db_impl/db_impl_compaction_flush.cc:423: rocksdb::Status rocksdb::DBImpl::AtomicFlushMemTablesToOutputFiles(const rocksdb::autovector<rocksdb::DBImpl::BGFlushArg>&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority): Assertion cfd->GetFlushReason() == cfds[0]->GetFlushReason() failed. `
**Summary:**
Suggested by ltamasi, we now refactor and let FlushRequest/Job to own flush_reason as there is no good way to define `ColumnFamilyData::flush_reason` in face of concurrent flushes on the same CF (which wasn't the case a long time ago when `ColumnFamilyData::flush_reason ` first introduced`)
**Tets:**
- new unit test
- make check
- aggressive crash test rehearsal
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11111
Reviewed By: ajkr
Differential Revision: D42644600
Pulled By: hx235
fbshipit-source-id: 8589c8184869d3415e5b780c887f877818a5ebaf
Summary:
Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage.
To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092
Reviewed By: siying
Differential Revision: D42525673
Pulled By: ajkr
fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee
Summary:
the `last_tombstone_start_user_key` variable in `BuildTable()` and in `CompactionOutputs::AddRangeDels()` may point to a start key that is freed if user-defined timestamp is enabled. This was causing ASAN failure and this PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11106
Test Plan: Added UT for repro.
Reviewed By: ajkr
Differential Revision: D42590862
Pulled By: cbi42
fbshipit-source-id: c493265ececdf89636d801d55ae929806c4d4b2c
Summary:
in `CompactionOutputs::ShouldStopBefore()`, TTL-related states, `cur_files_to_cut_for_ttl_` and `next_files_to_cut_for_ttl_`, are not updated if the function returns early. This can cause unnecessary compaction output file cuttings and hence produce smaller output files, which may hurt write amp. See the example in the unit test for how this "unnecessary file cutting" can happen. This PR fixes this issue by moving the code for updating TTL states earlier in `CompactionOutputs::ShouldStopBefore()` so that the states are updated for each key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11075
Test Plan: - Added new unit test.
Reviewed By: hx235
Differential Revision: D42398739
Pulled By: cbi42
fbshipit-source-id: 09fab66679c1a734abcfc31bcea33dd9aeb9dbc7
Summary:
in `CompactionOutputs::AddRangeDels()`, range tombstones with the same start and end key but different sequence numbers all contribute to compensated range tombstone size. This PR removes this redundancy. This PR also includes a fix from https://github.com/facebook/rocksdb/issues/11067 where a range tombstone that is not within a file's range was being added to the file. This fixes an assertion failure for `icmp.Compare(start, end) <= 0` in VersionSet::ApproximateSize() when calculating compensated range tombstone size. Assertions and a comment/essay was added to reason that no such range tombstone will be added after this fix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11091
Test Plan:
- Added unit tests
- Stress test with small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10`
Reviewed By: ajkr
Differential Revision: D42521588
Pulled By: cbi42
fbshipit-source-id: 5bda3fe38997995314e1f7592319af12b69bc4f8
Summary:
This reverts commit f02c708aa3 since it introduced several bugs (see https://github.com/facebook/rocksdb/issues/11078 and https://github.com/facebook/rocksdb/issues/11067 for attempts to fix them) and that I do not have a high confidence to fix all of them and ensure no further ones before the next release branch cut. There are also come existing issue found during bug fixing. We will work on it and try to merge it to the release after.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11089
Test Plan: existing CI.
Reviewed By: ajkr
Differential Revision: D42505972
Pulled By: cbi42
fbshipit-source-id: 2f66dcde6b85dc94977b317c2ce513872cfbc153
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).
The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.
* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)
## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
* Simpler for implementations to deal with just one Insert and one Lookup.
* Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
* Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
* Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
* It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
* I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.
## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).
The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.
These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)
Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.
## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.
## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.
The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.
## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)
## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975
Test Plan:
tests updated
Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):
34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83
Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.
Reviewed By: anand1976
Differential Revision: D42417818
Pulled By: pdillinger
fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
Summary:
valgrind build for `ExternalSSTFileBasicTest/ExternalSSTFileBasicTest.IngestFileWithMixedValueType` and `ExternalSSTFileBasicTest/ExternalSSTFileBasicTest.IngestFileWithGlobalSeqnoPickedSeqno` started failing (see error message in T141554665). I could not repro but I suspect it is due to file ingestion range overlapping with ongoing compaction, which caused a new global seqno being assigned after https://github.com/facebook/rocksdb/issues/10988.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11070
Test Plan: monitor future valgrind tests result.
Reviewed By: hx235
Differential Revision: D42319056
Pulled By: cbi42
fbshipit-source-id: acbcd841a2a15e36b278f39ba514f4b9a6ee43ca
Summary:
**Context:**
File ingestion never checks whether the key range it acts on overlaps with an ongoing RefitLevel() (used in `CompactRange()` with `change_level=true`). That's because RefitLevel() doesn't register and make its key range known to file ingestion. Though it checks overlapping with other compactions by https://github.com/facebook/rocksdb/blob/7.8.fb/db/external_sst_file_ingestion_job.cc#L998.
RefitLevel() (used in `CompactRange()` with `change_level=true`) doesn't check whether the key range it acts on overlaps with an ongoing file ingestion. That's because file ingestion does not register and make its key range known to other compactions.
- Note that non-refitlevel-compaction (e.g, manual compaction w/o RefitLevel() or general compaction) also does not check key range overlap with ongoing file ingestion for the same reason.
- But it's fine. Credited to cbi42's discovery, `WaitForIngestFile` was called by background and foreground compactions. They were introduced in 0f88160f67, 5c64fb67d2 and 87dfc1d23e.
- Regardless, this PR registers file ingestion like a compaction is a general approach that will also add range conflict check between file ingestion and non-refitlevel-compaction, though it has not been the issue motivated this PR.
Above are bugs resulting in two bad consequences:
- If file ingestion and RefitLevel() creates files in the same level, then range-overlapped files will be created at that level and caught as corruption by `force_consistency_checks=true`
- If file ingestion and RefitLevel() creates file in different levels, then with one further compaction on the ingested file, it can result in two same keys both with seqno 0 in two different levels. Then with iterator's [optimization](c62f322169/db/db_iter.cc (L342-L343)) that assumes no two same keys both with seqno 0, it will either break this assertion in debug build or, even worst, return value of this same key for the key after it, which is the wrong value to return, in release build.
Therefore we decide to introduce range conflict check for file ingestion and RefitLevel() inspired from the existing range conflict check among compactions.
**Summary:**
- Treat file ingestion job and RefitLevel() as `Compaction` of new compaction reasons: `CompactionReason::kExternalSstIngestion` and `CompactionReason::kRefitLevel` and register/unregister them. File ingestion is treated as compaction from L0 to different levels and RefitLevel() as compaction from source level to target level.
- Check for `RangeOverlapWithCompaction` with other ongoing compactions, `RegisterCompaction()` on this "compaction" before changing the LSM state in `VersionStorageInfo`, and `UnregisterCompaction()` after changing.
- Replace scattered fixes (0f88160f67, 5c64fb67d2 and 87dfc1d23e.) that prevents overlapping between file ingestion and non-refit-level compaction with this fix cuz those practices are easy to overlook.
- Misc: logic cleanup, see PR comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10988
Test Plan:
- New unit test `DBCompactionTestWithOngoingFileIngestionParam*` that failed pre-fix and passed afterwards.
- Made compatible with existing tests, see PR comments
- make check
- [Ongoing] Stress test rehearsal with normal value and aggressive CI value https://github.com/facebook/rocksdb/pull/10761
Reviewed By: cbi42
Differential Revision: D41535685
Pulled By: hx235
fbshipit-source-id: 549833a577ba1496d20a870583d4caa737da1258
Summary:
compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734
Test Plan:
- Added unit tests.
- benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used:
```
./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000
```
In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size.
Compaction stats from this PR:
```
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 2/0 31.54 MB 0.5 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 63.4 135.56 110.94 544 0.249 0 0 0.0 0.0
L4 3/0 96.55 MB 0.8 18.5 6.7 11.8 18.4 6.6 0.0 2.7 65.3 64.9 290.08 284.03 108 2.686 284M 1957K 0.0 0.0
L5 15/0 404.41 MB 1.0 19.1 7.7 11.4 18.8 7.4 0.3 2.5 66.6 65.7 292.93 285.34 220 1.332 293M 3808K 0.0 0.0
L6 143/0 4.12 GB 0.0 45.0 7.5 37.5 41.6 4.1 0.0 5.5 71.2 65.9 647.00 632.66 251 2.578 739M 47M 0.0 0.0
Sum 163/0 4.64 GB 0.0 82.6 21.9 60.7 87.2 26.5 0.3 10.4 61.9 65.4 1365.58 1312.97 1123 1.216 1318M 52M 0.0 0.0
```
Compaction stats from main:
```
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 0/0 0.00 KB 0.0 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 60.5 142.12 115.89 569 0.250 0 0 0.0 0.0
L4 3/0 85.68 MB 1.0 17.7 6.8 10.9 17.6 6.7 0.0 2.6 62.7 62.3 289.05 281.79 112 2.581 272M 2309K 0.0 0.0
L5 11/0 293.73 MB 1.0 18.8 7.5 11.2 18.5 7.2 0.5 2.5 64.9 63.9 296.07 288.50 220 1.346 288M 4365K 0.0 0.0
L6 130/0 3.94 GB 0.0 51.5 7.6 43.9 47.9 3.9 0.0 6.3 67.2 62.4 784.95 765.92 258 3.042 848M 51M 0.0 0.0
Sum 144/0 4.31 GB 0.0 88.0 21.9 66.0 92.3 26.3 0.5 11.0 59.6 62.5 1512.19 1452.09 1159 1.305 1409M 58M 0.0 0.0```
Reviewed By: ajkr
Differential Revision: D39834713
Pulled By: cbi42
fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b
Summary:
Some users are at least considering using SstPartitioner to support efficient physical migration of specific key ranges between RocksDB instances. One might expect manual `CompactRange()` over a narrow key range across some partition to enforce partitioning of any SST files crossing that partition boundary, but that currently only works if there are keys within that range.
This change makes the overlap logic in CompactRange more aware of the partitioner to automatically select relevant files crossing a partition boundary, even when they otherwise would not be selected due to the compaction range falling in a gap between entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11032
Test Plan: unit test included
Reviewed By: hx235
Differential Revision: D41981380
Pulled By: pdillinger
fbshipit-source-id: 2fe445bdddc73c00276c20f295cc1fa33d15b05a
Summary:
the [assertion](c3f720c60d/db/compaction/compaction_outputs.cc (L643)) in `CompactionOutputs::AddRangeDels()` can fail after https://github.com/facebook/rocksdb/pull/10802. The assertion fails when `lower_bound_from_range_tombstone` is true during `AddRangeDels()` for a new compaction output file, while the lower bound range tombstone key has seqno 0 and op_type kTypeRangeDeletion. It can have seqno 0 when it was truncated at a point key whose seqno was zeroed out during compaction, the seqno and op_type could be set [here](c3f720c60d/db/compaction/compaction_outputs.cc (L594)). This PR fixes the assertion excluding the case when `lower_bound_from_range_tombstone` is true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11040
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D42119914
Pulled By: cbi42
fbshipit-source-id: 0897e71b5304cb02aac30f71667b590c37b72baf
Summary:
This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802
Test Plan:
- added unit tests in db_range_del_test.
- stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000`
Reviewed By: ajkr, jay-zhuang
Differential Revision: D40308827
Pulled By: cbi42
fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df
Summary:
RocksDB has two public APIs: `DB::LockWAL()`/`DB::UnlockWAL()`. The current implementation acquires and
releases the internal `DBImpl::log_write_mutex_`.
According to the comment on `DBImpl::log_write_mutex_`: https://github.com/facebook/rocksdb/blob/7.8.fb/db/db_impl/db_impl.h#L2287:L2288
> Note: to avoid dealock, if needed to acquire both log_write_mutex_ and mutex_, the order should be first mutex_ and then log_write_mutex_.
This puts limitations on how applications can use the `LockWAL()` API. After `LockWAL()` returns ok, then application
should not perform any operation that acquires `mutex_`. Currently, the use case of `LockWAL()` is MyRocks implementing
the MySQL storage engine handlerton `lock_hton_log` interface. The operation that MyRocks performs after `LockWAL()`
is `GetSortedWalFiless()` which not only acquires mutex_, but also `log_write_mutex_`.
There are two issues:
1. Applications using these two APIs may hang if one thread calls `GetSortedWalFiles()` after
calling `LockWAL()` because log_write_mutex is not recursive.
2. Two threads may dead lock due to lock order inversion.
To fix these issues, we can modify the implementation of LockWAL so that it does not keep
`log_write_mutex_` held until UnlockWAL. To achieve the goal of locking the WAL, we can
instead manually inject a write stall so that all future writes will be stopped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11020
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D41785203
Pulled By: riversand963
fbshipit-source-id: 5ccb7a9c6eb9a2c3fa80fd2c399cc2568b8f89ce
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run 36a5686ec0 (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox`
- [Ongoing] normal db stress test
- [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761
Reviewed By: ajkr
Differential Revision: D41063187
Pulled By: hx235
fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9
Summary:
Add a tiered storage migration test which would conflict with
an ongoing penultimate level compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10908
Test Plan: Test only change
Reviewed By: anand1976
Differential Revision: D40864509
Pulled By: ajkr
fbshipit-source-id: e316e849a01a6c71a41be130101f909b6c0498cb
Summary:
Besides the existing ordering and validation, more is coming to VersionBuilder/VersionStorageInfo, like migration of epoch_numbers from older RocksDB versions. We should start using those common classes for importing CFs, instead of duplicating their ordering, validation, and migration logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11028
Test Plan: rely on existing tests
Reviewed By: hx235
Differential Revision: D41865427
Pulled By: ajkr
fbshipit-source-id: 873f5cd87b8902a2380c3b71373ce0b0db3a0c50
Summary:
Previously, you could get a format_version error if SST file size was too small in manifest, or a weird "too short" error if too big in manifest. Now we ensure:
* Magic number error is reported first if we attempt to open an SST file and the footer is completely bad.
* Footer errors are reported with affected file.
* If manifest file size doesn't match actual, then the error includes expected and actual sizes (if an error is reported; in some cases we allow the file to be too big)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11009
Test Plan:
unit tests added, some manual
Previously, the code for "file too short" in footer processing was only covered by some tests attempting to verify SST checksums on non-SST files (fixed).
Reviewed By: siying
Differential Revision: D41656272
Pulled By: pdillinger
fbshipit-source-id: 3da32702eb5aaedbea0e5e74742ad57edd7ad3df
Summary:
**Context/Summary:**
Credit to ajkr's https://github.com/facebook/rocksdb/pull/11016#pullrequestreview-1205020134,
flaky test https://app.circleci.com/pipelines/github/facebook/rocksdb/21985/workflows/5f6cc355-78c1-46d8-89ee-0fd679725a8a/jobs/540878 is due to `Flush()` called in the test returned earlier than obsoleted WAL being found in background flush and SyncWAL() was called (i.e, "sync_point_called" sets to true). Fix this by making checking `sync_point_called == true` after obsoleted WAL is found and `SyncWAL()` is called. Also rename the "sync_point_called" to be something more specific.
Also, fix a potential flakiness due to manually setting a log threshold to force new manifest creation. This is unreliable so I decided to use sync point to force new manifest creation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11016
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D41717786
Pulled By: hx235
fbshipit-source-id: ad1e4701a987285bbe6c8e7d9b05c4db06b4edf4
Summary:
when the compaction output file is empty, the assertion in `TimestampTablePropertiesCollector::Finish()` breaks. This PR fixes this assert and added unit test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11015
Test Plan: added UT.
Reviewed By: ajkr
Differential Revision: D41716719
Pulled By: cbi42
fbshipit-source-id: d891d46be4c4805e3d49be6b80c9d75f1bd51080
Summary:
When MultiGet with the async_io option encounters an IO error in TableCache::GetTableReader, it may result in leakage of table cache handles due to queued coroutines being abandoned. This PR fixes it by ensuring any queued coroutines are run before aborting the MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10997
Test Plan:
1. New unit test in db_basic_test
2. asan_crash
Reviewed By: pdillinger
Differential Revision: D41587244
Pulled By: anand1976
fbshipit-source-id: 900920cd3fba47cb0fc744a62facc5ffe2eccb64
Summary:
**Context**
`Options::track_and_verify_wals_in_manifest = true` verifies each of the WALs tracked in manifest indeed presents in the WAL folder. If not, a corruption "Missing WAL with log number" will be thrown.
`DB::SyncWAL()` called at a specific timing (i.e, at the `TEST_SYNC_POINT("FindObsoleteFiles::PostMutexUnlock")`) can record in a new manifest the WAL addition of a WAL file that already had a WAL deletion recorded in the previous manifest.
And the WAL deletion record is not rollover-ed to the new manifest. So the new manifest creates the illusion of such WAL never gets deleted and should presents at db re/open.
- Such WAL deletion record can be caused by flushing the memtable associated with that WAL and such WAL deletion can actually happen in` PurgeObsoleteFiles()`.
As a consequence, upon `DB::Reopen()`, this WAL file can be deleted while manifest still has its WAL addition record , which causes a false alarm of corruption "Missing WAL with log number" to be thrown.
**Summary**
This PR fixes this false alarm by rolling over the WAL deletion record from prev manifest to the new manifest by adding the WAL deletion record to the new manifest.
**Test**
- Make check
- Added new unit test `TEST_F(DBWALTest, FixSyncWalOnObseletedWalWithNewManifestCausingMissingWAL)` that failed before the fix and passed after
- [Ongoing]CI stress test + aggressive value as in https://github.com/facebook/rocksdb/pull/10761 , which is how this false alarm was first surfaced, to confirm such false alarm disappears
- [Ongoing]Regular CI stress test to confirm such fix didn't harm anything
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10892
Reviewed By: ajkr
Differential Revision: D40778965
Pulled By: hx235
fbshipit-source-id: a512364bfdeb0b1a55c171890e60d856c528f37f
Summary:
**Context/Summary:**
This reverts commit fc74abb436 and related HISTORY record.
The issue with PR 10777 or general approach using earliest_mem_seqno like https://github.com/facebook/rocksdb/pull/5958#issue-511150930 is that the earliest seqno of memtable of each CFs does not get persisted and will always start with 0 upon Recover(). Later when creating a new memtable in certain CF, we use the last seqno of the whole DB (but not of that CF from previous DB session) for this CF. This will lead to false positive overlapping seqno and PR 10777 will throw something like https://github.com/facebook/rocksdb/blob/main/db/compaction/compaction_picker.cc#L1002-L1004
Luckily a more elegant and complete solution to the overlapping seqno problem these PR aim to solve does not have above problem, see https://github.com/facebook/rocksdb/pull/10922. It is already being pursued and in the process of review. So we can just revert this PR and focus on getting PR10922 to land.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10999
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D41572604
Pulled By: hx235
fbshipit-source-id: 9d9bdf594abd235e2137045cef513ca0b14e0a3a
Summary:
In MergingIterator, if a range tombstone's start or end key is added to minHeap/maxHeap, the key is copied. This PR removes the copying of range tombstone keys by adding InternalKey comparator that compares `Slice` for internal key and `ParsedInternalKey` directly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10878
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmarks: I did not get improvement when compiling with DEBUG_LEVEL=0, and saw many noise. With `OPTIMIZE_LEVEL="-O3" USE_LTO=1` I do see improvement.
```
# Favorable set up: half of the writes are DeleteRange.
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=1000000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=50
# benchmark command
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --disable_auto_compactions=true --avoid_flush_during_recovery=true --seek_nexts=100 --reads=1000000 --num=1000000 --threads=25
# main
readseq [AVG 5 runs] : 26017977 (± 371077) ops/sec; 3721.9 (± 53.1) MB/sec
readseq [MEDIAN 5 runs] : 26096905 ops/sec; 3733.2 MB/sec
# this PR
readseq [AVG 5 runs] : 27481724 (± 568758) ops/sec; 3931.3 (± 81.4) MB/sec
readseq [MEDIAN 5 runs] : 27323957 ops/sec; 3908.7 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40711170
Pulled By: cbi42
fbshipit-source-id: 708cb584e2bd085a9ce0d2ef6a420489f721717f
Summary:
Currently, `iterate_upper_bound` is not checked for range tombstone keys in MergingIterator. This may impact performance when there is a large number of range tombstones right after `iterate_upper_bound`. This PR fixes this issue by checking `iterate_upper_bound` in MergingIterator for range tombstone keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10966
Test Plan:
- added unit test
- stress test: `python3 tools/db_crashtest.py whitebox --simple --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=18 --writepercent=48 --readpercen=15 --duration=36000 --range_deletion_width=100`
- ran different stress tests over sandcastle
- Falcon team ran some test traffic and saw reduced CPU usage on processing range tombstones.
Reviewed By: ajkr
Differential Revision: D41414172
Pulled By: cbi42
fbshipit-source-id: 9b2c29eb3abb99327c6a649bdc412e70d863f981
Summary:
Enabled output to penultimate level when file endpoints overlap. This is probably only possible when range tombstones span files. Otherwise the overlapping files would all be included in the penultimate level inputs thanks to our atomic compaction unit logic.
Also, corrected `penultimate_output_range_type_`, which is a minor fix as it appears only used for logging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10961
Test Plan: updated unit test
Reviewed By: cbi42
Differential Revision: D41370615
Pulled By: ajkr
fbshipit-source-id: 7e75ec369a3b41b8382b336446c81825a4c4f572
Summary:
The check for SST unique IDs added to best-efforts recovery (`Options::best_efforts_recovery` is true).
With best_efforts_recovery being true, RocksDB will recover to the latest point in
MANIFEST such that all valid SST files included up to this point pass unique ID checks as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10962
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D41378241
Pulled By: riversand963
fbshipit-source-id: a036064e2c17dec13d080a24ef2a9f85d607b16c
Summary:
Since the latency measurement uses real time it is possible for the operation to complete in zero microseconds and then fail these checks. We saw this with the operation that invokes Get() on an invalid CF. This PR relaxes the assertions to allow for operations completing in zero microseconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10979
Reviewed By: riversand963
Differential Revision: D41478300
Pulled By: ajkr
fbshipit-source-id: 50ef096bd8f0162b31adb46f54ae6ddc337d0a5e
Summary:
before this PR, if there is a range tombstone-only file generated in penultimate level, it is marked the `last_level_temperature`. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10972
Test Plan: added unit test for this scenario.
Reviewed By: ajkr
Differential Revision: D41449215
Pulled By: cbi42
fbshipit-source-id: 1e06b5ae3bc0183db2991a45965a9807a7e8be0c
Summary:
We were not resetting it in non-debug mode so it could be true once and then stay true for future keys where it should be false. This PR adds the reset logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10967
Test Plan:
- built `db_bench` with DEBUG_LEVEL=0
- ran benchmark: `TEST_TMPDIR=/dev/shm/prefix ./db_bench -benchmarks=fillrandom -compaction_style=1 -preserve_internal_time_seconds=100 -preclude_last_level_data_seconds=10 -write_buffer_size=1048576 -target_file_size_base=1048576 -subcompactions=8 -duration=120`
- compared "output_to_penultimate_level: X bytes + last: Y bytes" lines in LOG output
- Before this fix, Y was always zero
- After this fix, Y gradually increased throughout the benchmark
Reviewed By: riversand963
Differential Revision: D41417726
Pulled By: ajkr
fbshipit-source-id: ace1e9a289e751a5b0c2fbaa8addd4eda5525329
Summary:
Background. One of the core risks of chosing HyperClockCache is ending up with degraded performance if estimated_entry_charge is very significantly wrong. Too low leads to under-utilized hash table, which wastes a bit of (tracked) memory and likely increases access times due to larger working set size (more TLB misses). Too high leads to fully populated hash table (at some limit with reasonable lookup performance) and not being able to cache as many objects as the memory limit would allow. In either case, performance degradation is graceful/continuous but can be quite significant. For example, cutting block size in half without updating estimated_entry_charge could lead to a large portion of configured block cache memory (up to roughly 1/3) going unused.
Fix. This change adds a mechanism through which the DB periodically probes the block cache(s) for "problems" to report, and adds diagnostics to the HyperClockCache for bad estimated_entry_charge. The periodic probing is currently done with DumpStats / stats_dump_period_sec, and diagnostics reported to info_log (normally LOG file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10965
Test Plan:
unit test included. Doesn't cover all the implemented subtleties of reporting, but ensures basics of when to report or not.
Also manual testing with db_bench. Create db with
```
./db_bench --benchmarks=fillrandom,flush --num=3000000 --disable_wal=1
```
Use and check LOG file for HyperClockCache for various block sizes (used as estimated_entry_charge)
```
./db_bench --use_existing_db --benchmarks=readrandom --num=3000000 --duration=20 --stats_dump_period_sec=8 --cache_type=hyper_clock_cache -block_size=XXXX
```
Seeing warnings / errors or not as expected.
Reviewed By: anand1976
Differential Revision: D41406932
Pulled By: pdillinger
fbshipit-source-id: 4ca56162b73017e4b9cec2cad74466f49c27a0a7
Summary:
This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954
Test Plan: tests updated
Reviewed By: akankshamahajan15
Differential Revision: D41310123
Pulled By: pdillinger
fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c
Summary:
The patch extends the compaction logic to handle `Merge`s in conjunction with wide-column entities. As usual, the merge operation is applied to the anonymous default column, and any other columns are unaffected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10946
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41233722
Pulled By: ltamasi
fbshipit-source-id: dfd9b1362222f01bafcecb139eb48480eb279fed
Summary:
The patch adds `Merge` support for wide-column entities in `DBIter`. As before, the `Merge` operation is applied to the default column of the entity; any other columns are unchanged. As a small cleanup, the PR also changes the signature of `DBIter::Merge` to simply return a boolean instead of the `Merge` operation's `Status` since the actual `Status` is already stored in a member variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10941
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41195471
Pulled By: ltamasi
fbshipit-source-id: 362cf555897296e252c3de5ddfbd569ef34f85ef
Summary:
The patch untangles some nested ifs in `MergeHelper::MergeUntil`. This will come in handy when extending the compaction logic to support `Merge` for wide-column entities, and also enables us to eliminate some repeated branching on value type and to decrease the scope of some variables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10943
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41201946
Pulled By: ltamasi
fbshipit-source-id: 890bd3d4e31cdccadca614489a94686d76485ba9
Summary:
The patch refines/reworks `MergeHelper::TimedFullMerge(WithEntity)`
a bit in two ways. First, it eliminates the recently introduced `TimedFullMerge`
overload, which makes the responsibilities clearer by making sure the query
result (`value` for `Get`, `columns` for `GetEntity`) is set uniformly in
`SaveValue` and `GetContext`. Second, it changes the interface of
`TimedFullMergeWithEntity` so it exposes its result in a serialized form; this
is a more decoupled design which will come in handy when adding support
for `Merge` with wide-column entities to `DBIter`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10932
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D41129399
Pulled By: ltamasi
fbshipit-source-id: 69d8da358c77d4fc7e8c40f4dafc2c129a710677
Summary:
`DBIter::saved_value_` stores the result of any `Merge` that was performed to compute the iterator's current value. This value can be ditched whenever the iterator's position is changed, and is already cleared in `Seek`, `SeekForPrev`, `SeekToFirst`, and `SeekToLast`. With the patch, it is also cleared in `Next` and `Prev`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10934
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D41133473
Pulled By: ltamasi
fbshipit-source-id: cf9e936f48151e64e455cc1664d6e9f4a03aa308
Summary:
The patch fixes a bug where `GetContext::Merge` (and `MergeEntity`) does not update the ticker `READ_NUM_MERGE_OPERANDS` because it implicitly uses the default parameter value of `update_num_ops_stats=false` when calling `MergeHelper::TimedFullMerge`. Also, to prevent such issues going forward, the PR removes the default parameter values from the `TimedFullMerge` methods. In addition, it removes an unused/unnecessary parameter from `TimedFullMergeWithEntity`, and does some cleanup at the call sites of these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10925
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41096453
Pulled By: ltamasi
fbshipit-source-id: fc60646d32b4d516b8fe81e265c3f020a32fd7f8
Summary:
Prevents `MemTableList::PickMemtablesToFlush()` from picking non-consecutive memtables. It leads to wrong ordering in L0 if the files are committed, or an error like below if force_consistency_checks=true catches it:
```
Corruption: force_consistency_checks: VersionBuilder: L0 file https://github.com/facebook/rocksdb/issues/25 with seqno 320416 368066 vs. file https://github.com/facebook/rocksdb/issues/24 with seqno 336037 352068
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10921
Test Plan: fix the expectation in the existing test of this behavior
Reviewed By: riversand963
Differential Revision: D41046935
Pulled By: ajkr
fbshipit-source-id: 783696bff56115063d5dc5856dfaed6a9881d1ab
Summary:
When performing Merge during range scan, iterator should understand value types of kDeletionWithTimestamp.
Also add an additional check in debug mode to MergeHelper, and account for the presence of compaction filter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10915
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40960039
Pulled By: riversand963
fbshipit-source-id: dd79d86d7c79d05755bb939a3d94e0c53ddd7f59
Summary:
The patch adds `Merge` support for wide-column entities to the point lookup
APIs, i.e. `Get`, `MultiGet`, `GetEntity`, and `GetMergeOperands`. (I plan to
update the iterator and compaction logic in separate PRs.) In terms of semantics,
the `Merge` operation is applied to the default (anonymous) column; any other
columns in the entity are unaffected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10916
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40962311
Pulled By: ltamasi
fbshipit-source-id: 244bc9d172be1af2f204796b2f89104e4d2fa373
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910
Reviewed By: riversand963
Differential Revision: D40880683
Pulled By: ajkr
fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
Jay Huh
