mirror of https://github.com/facebook/rocksdb.git
211 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Peter Dillinger
|
e7ffca9493 |
Refactoring toward making preserve/preclude options mutable (#13114)
Summary: Move them to MutableCFOptions and perform appropriate refactorings to make that work. I didn't want to mix up refactoring with interesting functional changes. Potentially non-trivial bits here: * During DB Open or RegisterRecordSeqnoTimeWorker we use `GetLatestMutableCFOptions()` because either (a) there might not be a current version, or (b) we are in the process of applying the desired next options. * Upgrade some test infrastructure to allow some options in MutableCFOptions to be mutable (should be a temporary state) * Fix a warning that showed up about uninitialized `paranoid_memory_checks` Pull Request resolved: https://github.com/facebook/rocksdb/pull/13114 Test Plan: existing tests, manually check options are still not settable with SetOptions Reviewed By: jowlyzhang Differential Revision: D65429031 Pulled By: pdillinger fbshipit-source-id: 6e0906d08dd8ddf62731cefffe9b8d94149942b9 |
|
|
changyubi
|
2ce6902cf5 |
Introduce an interface `ReadOnlyMemTable` for immutable memtables (#13107)
Summary: This PR sets up follow-up changes for large transaction support. It introduces an interface that allows custom implementations of immutable memtables. Since transactions use a WriteBatchWithIndex to index their operations, I plan to add a ReadOnlyMemTable implementation backed by WriteBatchWithIndex. This will enable direct ingestion of WriteBatchWithIndex into the DB as an immutable memtable, bypassing memtable writes for transactions. The changes mostly involve moving required methods for immutable memtables into the ReadOnlyMemTable class. Pull Request resolved: https://github.com/facebook/rocksdb/pull/13107 Test Plan: * Existing unit test and stress test. * Performance: I do not expect this change to cause noticeable performance regressions with LTO and devirtualization. The memtable-only readrandom benchmark shows no consistent performance difference: ``` USE_LTO=1 OPTIMIZE_LEVEL="-O3" DEBUG_LEVEL=0 make -j160 db_bench (for I in $(seq 1 50);do ./db_bench --benchmarks=fillseq,readrandom --write_buffer_size=268435456 --writes=250000 --num=250000 --reads=500000 --seed=1723056275 2>&1 | grep "readrandom"; done;) | awk '{ t += $5; c++; print } END { print 1.0 * t / c }'; 3 runs: main: 760728, 752727, 739600 PR: 763036, 750696, 739022 ``` Reviewed By: jowlyzhang Differential Revision: D65365062 Pulled By: cbi42 fbshipit-source-id: 40c673ab856b91c65001ef6d6ac04b65286f2882 |
|
|
Andrew Ryan Chang
|
af2a36d2c7 |
Record newest_key_time as a table property (#13083)
Summary: This PR does two things: 1. Adds a new table property `newest_key_time` 2. Uses this property to improve TTL and temperature change compaction. ### Context The current `creation_time` table property should really be named `oldest_ancestor_time`. For flush output files, this is the oldest key time in the file. For compaction output files, this is the minimum among all oldest key times in the input files. The problem with using the oldest ancestor time for TTL compaction is that we may end up dropping files earlier than we should. What we really want is the newest (i.e. "youngest") key time. Right now we take a roundabout way to estimate this value -- we take the value of the _oldest_ key time for the _next_ (newer) SST file. This is also why the current code has checks for `index >= 1`. Our new property `newest_key_time` is set to the file creation time during flushes, and the max over all input files for compactions. There were some additional smaller changes that I had to make for testing purposes: - Refactoring the mock table reader to support specifying my own table properties - Refactoring out a test utility method `GetLevelFileMetadatas` that would otherwise be copy/pasted in 3 places Credit to cbi42 for the problem explanation and proposed solution ### Testing - Added a dedicated unit test to my `newest_key_time` logic in isolation (i.e. are we populating the property on flush and compaction) - Updated the existing unit tests (for TTL/temperate change compaction), which were comprehensive enough to break when I first made my code changes. I removed the test setup code which set the file metadata `oldest_ancestor_time`, so we know we are actually only using the new table property instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/13083 Reviewed By: cbi42 Differential Revision: D65298604 Pulled By: archang19 fbshipit-source-id: 898ef91b692ab33f5129a2a16b64ecadd4c32432 |
|
|
Yu Zhang
|
8592517c89 |
Remove stale entries from L0 files when UDT is not persisted (#13035)
Summary: When user-defined timestamps are not persisted, currently we replace the actual timestamp with min timestamp after an entry is output from compaction iterator. Compaction iterator won't be able to help with removing stale entries this way. This PR adds a wrapper iterator `TimestampStrippingIterator` for `MemTableIterator` that does the min timestamp replacement at the memtable iteration step. It is used by flush and can help remove stale entries from landing in L0 files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/13035 Test Plan: Added unit test Reviewed By: pdillinger, cbi42 Differential Revision: D63423682 Pulled By: jowlyzhang fbshipit-source-id: 087dcc9cee97b9ea51b8d2b88dc91c2984d54e55 |
|
|
Peter Dillinger
|
a1a102ffce |
Steps toward deprecating implicit prefix seek, related fixes (#13026)
Summary: With some new use cases onboarding to prefix extractors/seek/filters, one of the risks is existing iterator code, e.g. for maintenance tasks, being unintentionally subject to prefix seek semantics. This is a longstanding known design flaw with prefix seek, and `prefix_same_as_start` and `auto_prefix_mode` were steps in the direction of making that obsolete. However, we can't just immediately set `total_order_seek` to true by default, because that would impact so much code instantly. Here we add a new DB option, `prefix_seek_opt_in_only` that basically allows users to transition to the future behavior when they are ready. When set to true, all iterators will be treated as if `total_order_seek=true` and then the only ways to get prefix seek semantics are with `prefix_same_as_start` or `auto_prefix_mode`. Related fixes / changes: * Make sure that `prefix_same_as_start` and `auto_prefix_mode` are compatible with (or override) `total_order_seek` (depending on your interpretation). * Fix a bug in which a new iterator after dynamically changing the prefix extractor might mix different prefix semantics between memtable and SSTs. Both should use the latest extractor semantics, which means iterators ignoring memtable prefix filters with an old extractor. And that means passing the latest prefix extractor to new memtable iterators that might use prefix seek. (Without the fix, the test added for this fails in many ways.) Suggested follow-up: * Investigate a FIXME where a MergeIteratorBuilder is created in db_impl.cc. No unit test detects a change in value that should impact correctness. * Make memtable prefix bloom compatible with `auto_prefix_mode`, which might require involving the memtablereps because we don't know at iterator creation time (only seek time) whether an auto_prefix_mode seek will be a prefix seek. * Add `prefix_same_as_start` testing to db_stress Pull Request resolved: https://github.com/facebook/rocksdb/pull/13026 Test Plan: tests updated, added. Add combination of `total_order_seek=true` and `auto_prefix_mode=true` to stress test. Ran `make blackbox_crash_test` for a long while. Manually ran tests with `prefix_seek_opt_in_only=true` as default, looking for unexpected issues. I inspected most of the results and migrated many tests to be ready for such a change (but not all). Reviewed By: ltamasi Differential Revision: D63147378 Pulled By: pdillinger fbshipit-source-id: 1f4477b730683d43b4be7e933338583702d3c25e |
|
|
Yu Zhang
|
0c6e9c036a |
Make compaction always use the input version with extra ref protection (#12992)
Summary: `Compaction` is already creating its own ref for the input Version: |
|
|
Yu Zhang
|
a24574e80a |
Add documentation for background job's state transition (#12994)
Summary: The `SchedulePending*` API is a bit confusing since it doesn't immediately schedule the work and can be confused with the actual scheduling. So I have changed these to be `EnqueuePending*` and added some documentation for the corresponding state transitions of these background work. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12994 Test Plan: existing tests Reviewed By: cbi42 Differential Revision: D62252746 Pulled By: jowlyzhang fbshipit-source-id: ee68be6ed33070cad9a5004b7b3e16f5bcb041bf |
|
|
Yu Zhang
|
81d52bdc1a |
Fix UDT in memtable only assertions (#12946)
Summary:
Empty memtables can be legitimately created and flushed, for example by error recovery flush attempts:
|
|
|
Hui Xiao
|
349b1ec08f |
Fix duplicate WAL entries caused by write after error recovery (#12873)
Summary: **Context/Summary:** We recently discovered a case where write of the same key right after error recovery of a previous failed write of the same key finishes causes two same WAL entries, violating our assertion. This is because we don't advance seqno on failed write and reuse the same WAL containing the failed write for the new write if the memtable at the time is empty. This PR reuses the flush path for an empty memtable to switch WAL and update min WAL to keep in error recovery flush as well as updates the INFO log message for clarity. ``` 2024/07/17-15:01:32.271789 327757 (Original Log Time 2024/07/17-15:01:25.942234) [/flush_job.cc:1017] [default] [JOB 2] Level-0 flush table https://github.com/facebook/rocksdb/issues/9: 0 bytes OK It's an empty SST file from a successful flush so won't be kept in the DB 2024/07/17-15:01:32.271798 327757 (Original Log Time 2024/07/17-15:01:32.269954) [/memtable_list.cc:560] [default] Level-0 commit flush result of table https://github.com/facebook/rocksdb/issues/9 started 2024/07/17-15:01:32.271802 327757 (Original Log Time 2024/07/17-15:01:32.271217) [/memtable_list.cc:760] [default] Level-0 commit flush result of table https://github.com/facebook/rocksdb/issues/9: memtable https://github.com/facebook/rocksdb/issues/1 done ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12873 Test Plan: New UT that failed before this PR with following assertion failure (i.e, duplicate WAL entries) and passes after ``` db_wal_test: db/write_batch.cc:2254: rocksdb::Status rocksdb::{anonymous}::MemTableInserter::PutCFImpl(uint32_t, const rocksdb::Slice&, const rocksdb::Slice&, rocksdb::ValueType, RebuildTxnOp, const ProtectionInfoKVOS64*) [with RebuildTxnOp = rocksdb::{anonymous}::MemTableInserter::PutCF(uint32_t, const rocksdb::Slice&, const rocksdb::Slice&)::<lambda(rocksdb::WriteBatch*, uint32_t, const rocksdb::Slice&, const rocksdb::Slice&)>; uint32_t = unsigned int; rocksdb::ProtectionInfoKVOS64 = rocksdb::ProtectionInfoKVOS<long unsigned int>]: Assertion `seq_per_batch_' failed. ``` Reviewed By: anand1976 Differential Revision: D59884468 Pulled By: hx235 fbshipit-source-id: 5d854b719092552c69727a979f269fb7f6c39756 |
|
|
Yu Zhang
|
c73cf7a878 |
Add CompactForTieringCollector to support automatically trigger compaction for tiering use case (#12760)
Summary: This PR adds user property collector factory `CompactForTieringCollectorFactory` to support observe SST file and mark it as need compaction for fast tracking data to the proper tier. A triggering ratio `compaction_trigger_ratio_` can be configured to achieve the following: 1) Setting the ratio to be equal to or smaller than 0 disables this collector 2) Setting the ratio to be within (0, 1] will write the number of observed eligible entries into a user property and marks a file as need-compaction when aforementioned condition is met. 3) Setting the ratio to be higher than 1 can be used to just writes the user table property, and not mark any file as need compaction. For a column family that does not enable tiering feature, even if an effective configuration is provided, this collector is still disabled. For a file that is already on the last level, this collector is also disabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12760 Test Plan: Added unit tests Reviewed By: pdillinger Differential Revision: D58734976 Pulled By: jowlyzhang fbshipit-source-id: 6daab2c4f62b5c6689c3c03e3b3907bbbe6b7a81 |
|
|
Peter Dillinger
|
b515a5db3f |
Replace ScopedArenaIterator with ScopedArenaPtr<InternalIterator> (#12470)
Summary: ScopedArenaIterator is not an iterator. It is a pointer wrapper. And we don't need a custom implemented pointer wrapper when std::unique_ptr can be instantiated with what we want. So this adds ScopedArenaPtr<T> to replace those uses. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12470 Test Plan: CI (including ASAN/UBSAN) Reviewed By: jowlyzhang Differential Revision: D55254362 Pulled By: pdillinger fbshipit-source-id: cc96a0b9840df99aa807f417725e120802c0ae18 |
|
|
Yu Zhang
|
13e1c32a18 |
Follow ups for TimedPut and write time property (#12455)
Summary: This PR contains a few follow ups from https://github.com/facebook/rocksdb/issues/12419 and https://github.com/facebook/rocksdb/issues/12428 including: 1) Handle a special case for `WriteBatch::TimedPut`. When the user specified write time is `std::numeric_limits<uint64_t>::max()`, it's not treated as an error, but it instead creates and writes a regular `Put` entry. 2) Update the `InternalIterator::write_unix_time` APIs to handle `kTypeValuePreferredSeqno` entries. 3) FlushJob is updated to use the seqno to time mapping copy in `SuperVersion`. FlushJob currently copy the DB's seqno to time mapping while holding db mutex and only copies the part of interest, a.k.a, the part that only goes back to the earliest sequence number of the to-be-flushed memtables. While updating FlushJob to use the mapping copy in `SuperVersion`, it's given access to the full mapping to help cover the need to convert `kTypeValuePreferredSeqno`'s write time to preferred seqno as much as possible. Test plans: Added unit tests Pull Request resolved: https://github.com/facebook/rocksdb/pull/12455 Reviewed By: pdillinger Differential Revision: D55165422 Pulled By: jowlyzhang fbshipit-source-id: dc022653077f678c24661de5743146a74cce4b47 |
|
|
Yu Zhang
|
f2546b6623 |
Support returning write unix time in iterator property (#12428)
Summary: This PR adds support to return data's approximate unix write time in the iterator property API. The general implementation is: 1) If the entry comes from a SST file, the sequence number to time mapping recorded in that file's table properties will be used to deduce the entry's write time from its sequence number. If no such recording is available, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown except if the entry's sequence number is zero, in which case, 0 is returned. This also means that even if `preclude_last_level_data_seconds` and `preserve_internal_time_seconds` can be toggled off between DB reopens, as long as the SST file's table property has the mapping available, the entry's write time can be deduced and returned. 2) If the entry comes from memtable, we will use the DB's sequence number to write time mapping to do similar things. A copy of the DB's seqno to write time mapping is kept in SuperVersion to allow iterators to have lock free access. This also means a new `SuperVersion` is installed each time DB's seqno to time mapping updates, which is originally proposed by Peter in https://github.com/facebook/rocksdb/issues/11928 . Similarly, if the feature is not enabled, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown. Needed follow up: 1) The write time for `kTypeValuePreferredSeqno` should be special cased, where it's already specified by the user, so we can directly return it. 2) Flush job can be updated to use DB's seqno to time mapping copy in the SuperVersion. 3) Handle the case when `TimedPut` is called with a write time that is `std::numeric_limits<uint64_t>::max()`. We can make it a regular `Put`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12428 Test Plan: Added unit test Reviewed By: pdillinger Differential Revision: D54967067 Pulled By: jowlyzhang fbshipit-source-id: c795b1b7ec142e09e53f2ed3461cf719833cb37a |
|
|
Yu Zhang
|
1104eaa35e |
Add initial support for TimedPut API (#12419)
Summary:
This PR adds support for `TimedPut` API. We introduced a new type `kTypeValuePreferredSeqno` for entries added to the DB via the `TimedPut` API.
The life cycle of such an entry on the write/flush/compaction paths are:
1) It is initially added to memtable as:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, write_unix_time}`
2) When it's flushed to L0 sst files, it's converted to:
`<user_key, seq, kTypeValuePreferredSeqno>: {value, preferred_seqno}`
when we have easy access to the seqno to time mapping.
3) During compaction, if certain conditions are met, we swap in the `preferred_seqno` and the entry will become:
`<user_key, preferred_seqno, kTypeValue>: value`. This step helps fast track these entries to the cold tier if they are eligible after the sequence number swap.
On the read path:
A `kTypeValuePreferredSeqno` entry acts the same as a `kTypeValue` entry, the unix_write_time/preferred seqno part packed in value is completely ignored.
Needed follow ups:
1) The seqno to time mapping accessible in flush needs to be extended to cover the `write_unix_time` for possible `kTypeValuePreferredSeqno` entries. This also means we need to track these `write_unix_time` in memtable.
2) Compaction filter support for the new `kTypeValuePreferredSeqno` type for feature parity with other `kTypeValue` and equivalent types.
3) Stress test coverage for the feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12419
Test Plan: Added unit tests
Reviewed By: pdillinger
Differential Revision: D54920296
Pulled By: jowlyzhang
fbshipit-source-id: c8b43f7a7c465e569141770e93c748371ff1da9e
|
|
|
Peter Dillinger
|
13ef21c22e |
default_write_temperature option (#12388)
Summary: Currently SST files that aren't applicable to last_level_temperature nor file_temperature_age_thresholds are written with temperature kUnknown, which is a little weird and doesn't support CF-based tiering. The default_temperature option only affects how kUnknown is interpreted for stats. This change adds a new per-CF option default_write_temperature that determines the temperature of new SST files when those other options do not apply. Also made a change to ignore last_level_temperature with FIFO compaction, because I found that could lead to an infinite loop in compaction. Needed follow-up: Fix temperature handling with external file ingestion Pull Request resolved: https://github.com/facebook/rocksdb/pull/12388 Test Plan: unit tests extended appropriately. (Ignore whitespace changes when reviewing.) Reviewed By: jowlyzhang Differential Revision: D54266574 Pulled By: pdillinger fbshipit-source-id: c9ec9a74dbf22be6e986f77f9689d05fea8ef0bb |
|
|
Peter Dillinger
|
1d6dbfb8b7 |
Rename IntTblPropCollector -> InternalTblPropColl (#12320)
Summary: I've always found this name difficult to read, because it sounds like it's for collecting int(eger) table properties. I'm fixing this now to set up for a change that I have stubbed out in the public API (table_properties.h): a new adapter function `TablePropertiesCollector::AsInternal()` that allows RocksDB-provided TablePropertiesCollectors (such as CompactOnDeletionCollector) to implement the easier-to-upgrade internal interface while still (superficially) implementing the public interface. In addition to added flexibility, this should be a performance improvement as the adapter class UserKeyTablePropertiesCollector can be avoided for such cases where a RocksDB-provided collector is used (AsInternal() returns non-nullptr). table_properties.h is the only file with changes that aren't simple find-replace renaming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12320 Test Plan: existing tests, CI Reviewed By: ajkr Differential Revision: D53336945 Pulled By: pdillinger fbshipit-source-id: 02535bcb30bbfb00e29e8478af62e5dad50a63b8 |
|
|
Hui Xiao
|
96fb7de3bc |
Rate-limit un-ratelimited flush/compaction code paths (#12290)
Summary: **Context/Summary:** We recently found out some code paths in flush and compaction aren't rate-limited when they should. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12290 Test Plan: existing UT** Reviewed By: anand1976 Differential Revision: D53066103 Pulled By: hx235 fbshipit-source-id: 9dc4cab5f841230d18e5504dc480ac523e9d3950 |
|
|
Peter Dillinger
|
cb08a682d4 |
Fix/cleanup SeqnoToTimeMapping (#12253)
Summary: The SeqnoToTimeMapping class (RocksDB internal) used by the preserve_internal_time_seconds / preclude_last_level_data_seconds options was essentially in a prototype state with some significant flaws that would risk biting us some day. This is a big, complicated change because both the implementation and the behavioral requirements of the class needed to be upgraded together. In short, this makes SeqnoToTimeMapping more internally responsible for maintaining good invariants, so that callers don't easily encounter dangerous scenarios. * Some API functions were confusingly named and structured, so I fully refactored the APIs to use clear naming (e.g. `DecodeFrom` and `CopyFromSeqnoRange`), object states, function preconditions, etc. * Previously the object could informally be sorted / compacted or not, and there was limited checking or enforcement on these states. Now there's a well-defined "enforced" state that is consistently checked in debug mode for applicable operations. (I attempted to create a separate "builder" class for unenforced states, but IIRC found that more cumbersome for existing uses than it was worth.) * Previously operations would coalesce data in a way that was better for `GetProximalTimeBeforeSeqno` than for `GetProximalSeqnoBeforeTime` which is odd because the latter is the only one used by DB code currently (what is the seqno cut-off for data definitely older than this given time?). This is now reversed to consistently favor `GetProximalSeqnoBeforeTime`, with that logic concentrated in one place: `SeqnoToTimeMapping::SeqnoTimePair::Merge()`. Unfortunately, a lot of unit test logic was specifically testing the old, suboptimal behavior. * Previously, the natural behavior of SeqnoToTimeMapping was to THROW AWAY data needed to get reasonable answers to the important `GetProximalSeqnoBeforeTime` queries. This is because SeqnoToTimeMapping only had a FIFO policy for staying within the entry capacity (except in aggregate+sort+serialize mode). If the DB wasn't extremely careful to avoid gathering too many time mappings, it could lose track of where the seqno cutoff was for cold data (`GetProximalSeqnoBeforeTime()` returning 0) and preventing all further data migration to the cold tier--until time passes etc. for mappings to catch up with FIFO purging of them. (The problem is not so acute because SST files contain relevant snapshots of the mappings, but the problem would apply to long-lived memtables.) * Now the SeqnoToTimeMapping class has fully-integrated smarts for keeping a sufficiently complete history, within capacity limits, to give good answers to `GetProximalSeqnoBeforeTime` queries. * Fixes old `// FIXME: be smarter about how we erase to avoid data falling off the front prematurely.` * Fix an apparent bug in how entries are selected for storing into SST files. Previously, it only selected entries within the seqno range of the file, but that would easily leave a gap at the beginning of the timeline for data in the file for the purposes of answering GetProximalXXX queries with reasonable accuracy. This could probably lead to the same problem discussed above in naively throwing away entries in FIFO order in the old SeqnoToTimeMapping. The updated testing of GetProximalSeqnoBeforeTime in BasicSeqnoToTimeMapping relies on the fixed behavior. * Fix a potential compaction CPU efficiency/scaling issue in which each compaction output file would iterate over and sort all seqno-to-time mappings from all compaction input files. Now we distill the input file entries to a constant size before processing each compaction output file. Intended follow-up (me or others): * Expand some direct testing of SeqnoToTimeMapping APIs. Here I've focused on updating existing tests to make sense. * There are likely more gaps in availability of needed SeqnoToTimeMapping data when the DB shuts down and is restarted, at least with WAL. * The data tracked in the DB could be kept more accurate and limited if it used the oldest seqno of unflushed data. This might require some more API refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12253 Test Plan: unit tests updated Reviewed By: jowlyzhang Differential Revision: D52913733 Pulled By: pdillinger fbshipit-source-id: 020737fcbbe6212f6701191a6ab86565054c9593 |
|
|
Hui Xiao
|
81b6296c7e |
Pass flush IO activity enum in FlushJob::MaybeIncreaseFullHistoryTsLowToAboveCutoffUDT...() (#12197)
Summary: **Context/Summary:** as titled Pull Request resolved: https://github.com/facebook/rocksdb/pull/12197 Test Plan: ``` ./db_stress --acquire_snapshot_one_in=100 --adaptive_readahead=0 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --async_io=1 --atomic_flush=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=0 --block_size=16384 --bloom_before_level=2147483647 --bloom_bits=4.393039399748979 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=fixed_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash64 --clear_column_family_one_in=0 --compact_files_one_in=1000 --compact_range_one_in=1000 --compaction_pri=3 --compaction_readahead_size=1048576 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=0 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_blob_files=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=1 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=1000 --format_version=6 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=100000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=13 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=0 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=10000 --long_running_snapshots=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=10 --max_write_buffer_size_to_maintain=8388608 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0.1 --memtable_protection_bytes_per_key=2 --memtable_whole_key_filtering=1 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=2 --open_files=100 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=10000 --periodic_compaction_seconds=0 --persist_user_defined_timestamps=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=16384 --readpercent=55 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 --top_level_index_pinning=3 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=0 --use_multi_get_entity=0 --use_multiget=0 --use_put_entity_one_in=0 --use_txn=0 --use_write_buffer_manager=0 --user_timestamp_size=8 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=10000 --verify_file_checksums_one_in=0 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=1048576 --write_dbid_to_manifest=1 --write_fault_one_in=128 --writepercent=35 ``` Before fix: ``` db_stress_tool/db_stress_env_wrapper.h:92: virtual rocksdb::IOStatus rocksdb::DbStressWritableFileWrapper::Append(const rocksdb::Slice &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `io_activity == Env::IOActivity::kUnknown || io_activity == options.io_activity' failed. ``` After fix: Succeed Reviewed By: ajkr Differential Revision: D52492030 Pulled By: hx235 fbshipit-source-id: 842a0dcbdf135838b57ddb4a3a6f1effc8dd3e82 |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
Peter Dillinger
|
02443dd93f |
Refactor, clean up, fixes, and more testing for SeqnoToTimeMapping (#11905)
Summary: This change is before a planned DBImpl change to ensure all sufficiently recent sequence numbers since Open are covered by SeqnoToTimeMapping (bug fix with existing test work-arounds). **Intended follow-up** However, I found enough issues with SeqnoToTimeMapping to warrant this PR first, including very small fixes in DB implementation related to API contract of SeqnoToTimeMapping. Functional fixes / changes: * This fixes some mishandling of boundary cases. For example, if the user decides to stop writing to DB, the last written sequence number would perpetually have its write time updated to "now" and would always be ineligible for migration to cold tier. Part of the problem is that the SeqnoToTimeMapping would return a seqno known to have been written before (immediately or otherwise) the requested time, but compaction_job.cc would include that seqno in the preserve/exclude set. That is fixed (in part) by adding one in compaction_job.cc * That problem was worse because a whole range of seqnos could be updated perpetually with new times in SeqnoToTimeMapping::Append (if no writes to DB). That logic was apparently optimized for GetOldestApproximateTime (now GetProximalTimeBeforeSeqno), which is not used in production, to the detriment of GetOldestSequenceNum (now GetProximalSeqnoBeforeTime), which is used in production. (Perhaps plans changed during development?) This is fixed in Append to optimize for accuracy of GetProximalSeqnoBeforeTime. (Unit tests added and updated.) * Related: SeqnoToTimeMapping did not have a clear contract about the relationships between seqnos and times, just the idea of a rough correspondence. Now the class description makes it clear that the write time of each recorded seqno comes before or at the associated time, to support getting best results for GetProximalSeqnoBeforeTime. And this makes it easier to make clear the contract of each API function. * Update `DBImpl::RecordSeqnoToTimeMapping()` to follow this ordering in gathering samples. Some part of these changes has required an expanded test work-around for the problem (see intended follow-up above) that the DB does not immediately ensure recent seqnos are covered by its mapping. These work-arounds will be removed with that planned work. An apparent compaction bug is revealed in PrecludeLastLevelTest::RangeDelsCauseFileEndpointsToOverlap, so that test is disabled. Filed GitHub issue #11909 Cosmetic / code safety things (not exhaustive): * Fix some confusing names. * `seqno_time_mapping` was used inconsistently in places. Now just `seqno_to_time_mapping` to correspond to class name. * Rename confusing `GetOldestSequenceNum` -> `GetProximalSeqnoBeforeTime` and `GetOldestApproximateTime` -> `GetProximalTimeBeforeSeqno`. Part of the motivation is that our times and seqnos here have the same underlying type, so we want to be clear about which is expected where to avoid mixing. * Rename `kUnknownSeqnoTime` to `kUnknownTimeBeforeAll` because the value is a bad choice for unknown if we ever add ProximalAfterBlah functions. * Arithmetic on SeqnoTimePair doesn't make sense except for delta encoding, so use better names / APIs with that in mind. * (OMG) Don't allow direct comparison between SeqnoTimePair and SequenceNumber. (There is no checking that it isn't compared against time by accident.) * A field name essentially matching the containing class name is a confusing pattern (`seqno_time_mapping_`). * Wrap calls to confusing (but useful) upper_bound and lower_bound functions to have clearer names and more code reuse. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11905 Test Plan: GetOldestSequenceNum (now GetProximalSeqnoBeforeTime) and TruncateOldEntries were lacking unit tests, despite both being used in production (experimental feature). Added those and expanded others. Reviewed By: jowlyzhang Differential Revision: D49755592 Pulled By: pdillinger fbshipit-source-id: f72a3baac74d24b963c77e538bba89a7fc8dce51 |
|
|
Changyu Bi
|
0086809601 |
Fix a bug with atomic_flush that causes DB to stuck after a flush failure (#11872)
Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable:
|
|
|
Changyu Bi
|
b927ba5936 |
Rollback other pending memtable flushes when a flush fails (#11865)
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status:
|
|
|
Yu Zhang
|
4234a6a301 |
Increase full_history_ts_low when flush happens during recovery (#11774)
Summary: This PR adds a missing piece for the UDT in memtable only feature, which is to automatically increase `full_history_ts_low` when flush happens during recovery. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11774 Test Plan: Added unit test make all check Reviewed By: ltamasi Differential Revision: D48799109 Pulled By: jowlyzhang fbshipit-source-id: fd681ed66d9d40904ca2c919b2618eb692686035 |
|
|
Yu Zhang
|
ecbeb305a0 |
Removing some checks for UDT in memtable only feature (#11732)
Summary: The user-defined timestamps feature only enforces that for the same key, user-defined timestamps should be non-decreasing. For the user-defined timestamps in memtable only feature, during flush, we check the user-defined timestamps in each memtable to examine if the data is considered expired with regard to `full_history_ts_low`. In this process, it's assuming that a newer memtable should not have smaller user-defined timestamps than an older memtable. This check however is enforcing ordering of user-defined timestamps across keys, as apposed to the vanilla UDT feature, that only enforce ordering of user-defined timestamps for the same key. This more strict user-defined timestamp ordering requirement could be an issue for secondary instances where commits can be out of order. And after thinking more about it, this requirement is really an overkill to keep the invariants of `full_history_ts_low` which are: 1) users cannot read below `full_history_ts_low` 2) users cannot write at or below `full_history_ts_low` 3) `full_history_ts_low` can only be increasing As long as RocksDB enforces these 3 checks, we can prohibit inconsistent read that returns a different value. And these three checks are covered in existing APIs. So this PR removes the extra checks in the UDT in memtable only feature that requires user-defined timestamps to be non decreasing across keys. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11732 Reviewed By: ltamasi Differential Revision: D48541466 Pulled By: jowlyzhang fbshipit-source-id: 95453c6e391cbd511c0feab05f0b11c312d17186 |
|
|
Vardhan
|
87a21d08fe |
Add an option to trigger flush when the number of range deletions reach a threshold (#11358)
Summary: Add a mutable column family option `memtable_max_range_deletions`. When non-zero, RocksDB will try to flush the current memtable after it has at least `memtable_max_range_deletions` range deletions. Java API is added and crash test is updated accordingly to randomly enable this option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11358 Test Plan: * New unit test: `DBRangeDelTest.MemtableMaxRangeDeletions` * Ran crash test `python3 ./tools/db_crashtest.py whitebox --simple --memtable_max_range_deletions=20` and saw logs showing flushed memtables usually with 20 range deletions. Reviewed By: ajkr Differential Revision: D46582680 Pulled By: cbi42 fbshipit-source-id: f23d6fa8d8264ecf0a18d55c113ba03f5e2504da |
|
|
Changyu Bi
|
6a0f637633 |
Compare the number of input keys and processed keys for compactions (#11571)
Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92 |
|
|
Yu Zhang
|
4ea7b796b7 |
Respect cutoff timestamp during flush (#11599)
Summary: Make flush respect the cutoff timestamp `full_history_ts_low` as much as possible for the user-defined timestamps in Memtables only feature. We achieve this by not proceeding with the actual flushing but instead reschedule the same `FlushRequest` so a follow up flush job can continue with the check after some interval. This approach doesn't work well for atomic flush, so this feature currently is not supported in combination with atomic flush. Furthermore, this approach also requires a customized method to get the next immediately bigger user-defined timestamp. So currently it's limited to comparator that use uint64_t as the user-defined timestamp format. This support can be extended when we add such a customized method to `AdvancedColumnFamilyOptions`. For non atomic flush request, at any single time, a column family can only have as many as one FlushRequest for it in the `flush_queue_`. There is deduplication done at `FlushRequest` enqueueing(`SchedulePendingFlush`) and dequeueing time (`PopFirstFromFlushQueue`). We hold the db mutex between when a `FlushRequest` is popped from the queue and the same FlushRequest get rescheduled, so no other `FlushRequest` with a higher `max_memtable_id` can be added to the `flush_queue_` blocking us from re-enqueueing the same `FlushRequest`. Flush is continued nevertheless if there is risk of entering write stall mode had the flush being postponed, e.g. due to accumulation of write buffers, exceeding the `max_write_buffer_number` setting. When this happens, the newest user-defined timestamp in the involved Memtables need to be tracked and we use it to increase the `full_history_ts_low`, which is an inclusive cutoff timestamp for which RocksDB promises to keep all user-defined timestamps equal to and newer than it. Tet plan: ``` ./column_family_test --gtest_filter="*RetainUDT*" ./memtable_list_test --gtest_filter="*WithTimestamp*" ./flush_job_test --gtest_filter="*WithTimestamp*" ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11599 Reviewed By: ajkr Differential Revision: D47561586 Pulled By: jowlyzhang fbshipit-source-id: 9400445f983dd6eac489e9dd0fb5d9b99637fe89 |
|
|
Yu Zhang
|
7521478b43 |
Record the `persist_user_defined_timestamps` flag in manifest (#11515)
Summary: Start to record the value of the flag `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` in the Manifest and table properties for a SST file when it is created. And use the recorded flag when creating a table reader for the SST file. This flag's default value is true, it is only explicitly recorded if it's false. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11515 Test Plan: ``` make all check ./version_edit_test ``` Reviewed By: ltamasi Differential Revision: D46920386 Pulled By: jowlyzhang fbshipit-source-id: 075c20363d3d2cc1368422ecc805617ed135cc26 |
|
|
darionyaphet
|
9f774baaa8 |
Support Error Recovery Retry Flush in GetFlushReasonString (#11536)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11536 Reviewed By: cbi42 Differential Revision: D46732297 Pulled By: ajkr fbshipit-source-id: 82bb078f189da233addc4f483eaa6eaf7fdd3910 |
|
|
Jay Huh
|
87bc929db3 |
Flush option in WaitForCompact() (#11483)
Summary: Context: As mentioned in https://github.com/facebook/rocksdb/issues/11436, introducing `flush` option in `WaitForCompactOptions` to flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB. 1. `bool flush = false` added to `WaitForCompactOptions` 2. `DBImpl::FlushAllColumnFamilies()` is introduced and `DBImpl::FlushForGetLiveFiles()` is refactored to call it. 3. `DBImpl::FlushAllColumnFamilies()` gets called before waiting in `WaitForCompact()` if `flush` option is `true` 4. Some previous WaitForCompact tests were parameterized to include both cases for `abort_on_pause_` being true/false as well as `flush_` being true/false Pull Request resolved: https://github.com/facebook/rocksdb/pull/11483 Test Plan: - `DBCompactionTest::WaitForCompactWithOptionToFlush` added - Changed existing DBCompactionTest::WaitForCompact tests to `DBCompactionWaitForCompactTest` to include params Reviewed By: pdillinger Differential Revision: D46289770 Pulled By: jaykorean fbshipit-source-id: 70d3f461d96a6e06390be60170dd7c4d0d38f8b0 |
|
|
Hui Xiao
|
8f763bdeab |
Record and use the tail size to prefetch table tail (#11406)
Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064 |
|
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
Hui Xiao
|
86fa2592be |
Fix data race on `ColumnFamilyData::flush_reason` by letting FlushRequest/Job owns flush_reason instead of CFD (#11111)
Summary: **Context:** Concurrent flushes on the same CF can set on `ColumnFamilyData::flush_reason` before each other flush finishes. An symptom is one CF has different flush_reason with others though all of them are in an atomic flush `db_stress: db/db_impl/db_impl_compaction_flush.cc:423: rocksdb::Status rocksdb::DBImpl::AtomicFlushMemTablesToOutputFiles(const rocksdb::autovector<rocksdb::DBImpl::BGFlushArg>&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority): Assertion cfd->GetFlushReason() == cfds[0]->GetFlushReason() failed. ` **Summary:** Suggested by ltamasi, we now refactor and let FlushRequest/Job to own flush_reason as there is no good way to define `ColumnFamilyData::flush_reason` in face of concurrent flushes on the same CF (which wasn't the case a long time ago when `ColumnFamilyData::flush_reason ` first introduced`) **Tets:** - new unit test - make check - aggressive crash test rehearsal Pull Request resolved: https://github.com/facebook/rocksdb/pull/11111 Reviewed By: ajkr Differential Revision: D42644600 Pulled By: hx235 fbshipit-source-id: 8589c8184869d3415e5b780c887f877818a5ebaf |
|
|
Changyu Bi
|
cc6f323705 |
Include estimated bytes deleted by range tombstones in compensated file size (#10734)
Summary: compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734 Test Plan: - Added unit tests. - benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used: ``` ./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000 ``` In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size. Compaction stats from this PR: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 2/0 31.54 MB 0.5 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 63.4 135.56 110.94 544 0.249 0 0 0.0 0.0 L4 3/0 96.55 MB 0.8 18.5 6.7 11.8 18.4 6.6 0.0 2.7 65.3 64.9 290.08 284.03 108 2.686 284M 1957K 0.0 0.0 L5 15/0 404.41 MB 1.0 19.1 7.7 11.4 18.8 7.4 0.3 2.5 66.6 65.7 292.93 285.34 220 1.332 293M 3808K 0.0 0.0 L6 143/0 4.12 GB 0.0 45.0 7.5 37.5 41.6 4.1 0.0 5.5 71.2 65.9 647.00 632.66 251 2.578 739M 47M 0.0 0.0 Sum 163/0 4.64 GB 0.0 82.6 21.9 60.7 87.2 26.5 0.3 10.4 61.9 65.4 1365.58 1312.97 1123 1.216 1318M 52M 0.0 0.0 ``` Compaction stats from main: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 0.0 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 60.5 142.12 115.89 569 0.250 0 0 0.0 0.0 L4 3/0 85.68 MB 1.0 17.7 6.8 10.9 17.6 6.7 0.0 2.6 62.7 62.3 289.05 281.79 112 2.581 272M 2309K 0.0 0.0 L5 11/0 293.73 MB 1.0 18.8 7.5 11.2 18.5 7.2 0.5 2.5 64.9 63.9 296.07 288.50 220 1.346 288M 4365K 0.0 0.0 L6 130/0 3.94 GB 0.0 51.5 7.6 43.9 47.9 3.9 0.0 6.3 67.2 62.4 784.95 765.92 258 3.042 848M 51M 0.0 0.0 Sum 144/0 4.31 GB 0.0 88.0 21.9 66.0 92.3 26.3 0.5 11.0 59.6 62.5 1512.19 1452.09 1159 1.305 1409M 58M 0.0 0.0``` Reviewed By: ajkr Differential Revision: D39834713 Pulled By: cbi42 fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b |
|
|
Hui Xiao
|
98d5db5c2e |
Sort L0 files by newly introduced epoch_num (#10922)
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run
|
|
|
Andrew Kryczka
|
5cf6ab6f31 |
Ran clang-format on db/ directory (#10910)
Summary: Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910 Reviewed By: riversand963 Differential Revision: D40880683 Pulled By: ajkr fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174 |
|
|
Changyu Bi
|
9f2363f4c4 |
User-defined timestamp support for `DeleteRange()` (#10661)
Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2 |
|
|
Levi Tamasi
|
81388b36e0 |
Add support for wide-column point lookups (#10540)
Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b |
|
|
Changyu Bi
|
9d77bf8f7b |
Fragment memtable range tombstone in the write path (#10380)
Summary: - Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact. - db_bench is updated to print out the number of range deletions executed if there is any. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380 Test Plan: - CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed. - Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable. ``` single thread: ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100 multi_thread ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100 ``` Commit |
|
|
Yanqin Jin
|
fbfcf5cbcd |
Remove unused fields from FileMetaData (temporarily) (#10443)
Summary: FileMetaData::[min|max]_timestamp are not currently being used or tracked by RocksDB, even when user-defined timestamp is enabled. Each of them is a std::string which can occupy 32 bytes. Remove them for now. They may be added back when we have a pressing need for them. When we do add them back, consider store them in a more compact way, e.g. one boolean flag and a byte array of size 16. Per file min/max timestamp bounds are available as table properties. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443 Test Plan: make check Reviewed By: pdillinger Differential Revision: D38292275 Pulled By: riversand963 fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94 |
|
|
Jay Zhuang
|
faa0f9723c |
Tiered compaction: integrate Seqno time mapping with per key placement (#10370)
Summary: Using the Sequence number to time mapping to decide if a key is hot or not in compaction and place it in the corresponding level. Note: the feature is not complete, level compaction will run indefinitely until all penultimate level data is cold and small enough to not trigger compaction. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10370 Test Plan: CI * Run basic db_bench for universal compaction manually Reviewed By: siying Differential Revision: D37892338 Pulled By: jay-zhuang fbshipit-source-id: 792bbd91b1ccc2f62b5d14c53118434bcaac4bbe |
|
|
Jay Zhuang
|
a3acf2ef87 |
Add seqno to time mapping (#10338)
Summary: Which will be used for tiered storage to preclude hot data from compacting to the cold tier (the last level). Internally, adding seqno to time mapping. A periodic_task is scheduled to record the current_seqno -> current_time in certain cadence. When memtable flush, the mapping informaiton is stored in sstable property. During compaction, the mapping information are merged and get the approximate time of sequence number, which is used to determine if a key is recently inserted or not and preclude it from the last level if it's recently inserted (within the `preclude_last_level_data_seconds`). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338 Test Plan: CI Reviewed By: siying Differential Revision: D37810187 Pulled By: jay-zhuang fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f |
|
|
Baptiste Lemaire
|
5879053fd0 |
Dynamically changeable `MemPurge` option (#10011)
Summary: **Summary** Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled. **Motivation** RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible. Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement. **Content of this PR** This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes. **Benchmarking** I will add numbers to prove that there is no performance impact within the next 12 hours. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011 Reviewed By: pdillinger Differential Revision: D36462357 Pulled By: bjlemaire fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802 |
|
|
zczhu
|
3ee6c9baec |
Consolidate manual_compaction_paused_ check (#10070)
Summary: As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`. Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070 Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test). Reviewed By: ajkr Differential Revision: D36949133 Pulled By: littlepig2013 fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821 |
|
|
sdong
|
bea5831bff |
Move three info logging within DB Mutex to use log buffer (#10029)
Summary: info logging with DB Mutex could potentially invoke I/O and cause performance issues. Move three of the cases to use log buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10029 Test Plan: Run existing tests. Reviewed By: jay-zhuang Differential Revision: D36561694 fbshipit-source-id: cabb93fea299001a6b4c2802fcba3fde27fa062c |
|
|
Jay Zhuang
|
c6d326d3d7 |
Track SST unique id in MANIFEST and verify (#9990)
Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f |
|
|
gitbw95
|
05c678e135 |
Set Write rate limiter priority dynamically and pass it to FS (#9988)
Summary: ### Context: Background compactions and flush generate large reads and writes, and can be long running, especially for universal compaction. In some cases, this can impact foreground reads and writes by users. From the RocksDB perspective, there can be two kinds of rate limiters, the internal (native) one and the external one. - The internal (native) rate limiter is introduced in [the wiki](https://github.com/facebook/rocksdb/wiki/Rate-Limiter). Currently, only IO_LOW and IO_HIGH are used and they are set statically. - For the external rate limiter, in FSWritableFile functions, IOOptions is open for end users to set and get rate_limiter_priority for their own rate limiter. Currently, RocksDB doesn’t pass the rate_limiter_priority through IOOptions to the file system. ### Solution During the User Read, Flush write, Compaction read/write, the WriteController is used to determine whether DB writes are stalled or slowed down. The rate limiter priority (Env::IOPriority) can be determined accordingly. We decided to always pass the priority in IOOptions. What the file system does with it should be a contract between the user and the file system. We would like to set the rate limiter priority at file level, since the Flush/Compaction job level may be too coarse with multiple files and block IO level is too granular. **This PR is for the Write path.** The **Write:** dynamic priority for different state are listed as follows: | State | Normal | Delayed | Stalled | | ----- | ------ | ------- | ------- | | Flush | IO_HIGH | IO_USER | IO_USER | | Compaction | IO_LOW | IO_USER | IO_USER | Flush and Compaction writes share the same call path through BlockBaseTableWriter, WritableFileWriter, and FSWritableFile. When a new FSWritableFile object is created, its io_priority_ can be set dynamically based on the state of the WriteController. In WritableFileWriter, before the call sites of FSWritableFile functions, WritableFileWriter::DecideRateLimiterPriority() determines the rate_limiter_priority. The options (IOOptions) argument of FSWritableFile functions will be updated with the rate_limiter_priority. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9988 Test Plan: Add unit tests. Reviewed By: anand1976 Differential Revision: D36395159 Pulled By: gitbw95 fbshipit-source-id: a7c82fc29759139a1a07ec46c37dbf7e753474cf |
|
|
Yanqin Jin
|
3f263ef536 |
Add a temporary option for user to opt-out enforcement of SingleDelete contract (#9983)
Summary: PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete. For some of existing use cases, it is desirable to have a transition during which compaction will not fail if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again. In a future release, the option will be removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983 Test Plan: make check Reviewed By: ajkr Differential Revision: D36333672 Pulled By: riversand963 fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2 |