Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12688
As a first step of covering the wide-column transaction APIs, the patch adds `PutEntity` to the optimistic and pessimistic transaction stress tests (for the latter, only when the WriteCommitted policy is utilized). Other APIs and the multi-operation transaction test will be covered by subsequent PRs.
Reviewed By: jaykorean
Differential Revision: D57675781
fbshipit-source-id: bfe062ec5f6ab48641cd99a70f239ce4aa39299c
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12683
With optimistic transactions, the stress test parameter `txn_write_policy` is not applicable and is thus not set. When the parameter is subsequently checked, Python's dictionary `get` method returns `None`, which is not equal to zero. The net result of this is that currently, `sync_fault_injection` and `manual_wal_flush_one_in` are always disabled in optimistic transaction mode (most likely unintentionally).
Reviewed By: cbi42
Differential Revision: D57655339
fbshipit-source-id: 8b93a788f9b02307b6ea7b2129dc012271130334
Summary:
We recently noticed that some memtable flushed and file
ingestions could proceed during LockWAL, in violation of its stated
contract. (Note: we aren't 100% sure its actually needed by MySQL, but
we want it to be in a clean state nonetheless.)
Despite earlier skepticism that this could be done safely (https://github.com/facebook/rocksdb/issues/12666), I
found a place to wait to wait for LockWAL to be cleared before allowing
these operations to proceed: WaitForPendingWrites()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12652
Test Plan:
Added to unit tests. Extended how db_stress validates LockWAL
and re-enabled combination of ingestion and LockWAL in crash test, in
follow-up to https://github.com/facebook/rocksdb/issues/12642
Ran blackbox_crash_test for a long while with relevant features
amplified.
Suggested follow-up: fix FaultInjectionTestFS to report file sizes
consistent with what the user has requested to be flushed.
Reviewed By: jowlyzhang
Differential Revision: D57622142
Pulled By: pdillinger
fbshipit-source-id: aef265fce69465618974b4ec47f4636257c676ce
Summary:
the value of `inplace_update_support` option need to be fixed across runs of db_stress on the same DB (https://github.com/facebook/rocksdb/issues/12577). My recent fix (https://github.com/facebook/rocksdb/issues/12673) regressed this behavior. Also fix some existing places where this does not hold.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12675
Test Plan: monitor crash tests related to `inplace_update_support`.
Reviewed By: hx235
Differential Revision: D57576375
Pulled By: cbi42
fbshipit-source-id: 75b1bd233f03e5657984f5d5234dbbb1ffc35c27
Summary:
With unsynced data loss, we replay traces to recover expected state to DB's latest sequence number. With `inplace_update_support`, the largest sequence number of memtable may not reflect the latest update. This is because inplace updates in memtable do not update sequence number. So we disable `inplace_update_support` where traces need to be replayed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12673
Reviewed By: ltamasi
Differential Revision: D57512548
Pulled By: cbi42
fbshipit-source-id: 69278fe2e935874faf744d0ac4fd85263773c3ec
Summary:
As titled. A proper fix should probably be failing file ingestion if the DB is in a lock wal state as it promises to "Freezes the logical state of the DB".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12642
Reviewed By: pdillinger
Differential Revision: D57235869
Pulled By: jowlyzhang
fbshipit-source-id: c70031463842220f865621eb6f53424df27d29e9
Summary:
Seeing way too many errors likely related to PromoteL0 from https://github.com/facebook/rocksdb/issues/12617, containing
```
Cannot delete table file #N from level 0 since it is on level X
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12651
Test Plan: watch crash test results
Reviewed By: hx235
Differential Revision: D57286208
Pulled By: pdillinger
fbshipit-source-id: f7f0560cc0804ca297373c8d20ebc34986cc19d0
Summary:
Adding AttributeGroup APIs in stress test. This contains the following changes only. More PRs to follow.
- Introduce `use_attribute_group` flag
- AttributeGroup `PutEntity()` and `GetEntity()` are now used per `use_attribute_group` flag in BatchOps, NonBatchOps and CfConsistency tests
In the next PRs I plan to add
- AttributeGroup `MultiGetEntity()` in Stress Test
- AttributeGroupIterator in Stress Test (along with CoalescingIterator)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12605
Test Plan:
NonBatchOps
```
python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
BatchOps
```
python3 tools/db_crashtest.py blackbox --test_batches_snapshots=1 --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
CfConsistency Test
```
python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --use_attribute_group=1 --use_put_entity_one_in=1
```
Reviewed By: ltamasi
Differential Revision: D56916768
Pulled By: jaykorean
fbshipit-source-id: 8555d9e0d05927740a10e4e8301e44beec59a6f5
Summary:
**Context/Summary:**
As titled. Bonus: found that PromoteL0 called with other concurrent PromoteL0 will return non-okay error so clarify the API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12617
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56954428
Pulled By: hx235
fbshipit-source-id: 0e056153c515003fd241ffec59b0d8a27529db4c
Summary:
After https://github.com/facebook/rocksdb/issues/12624 seeing db_stress failures due to db_crashtest.py calling it with --prefixpercent=5 --enable_compaction_filter=1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12627
Test Plan: watch crash test
Reviewed By: ajkr
Differential Revision: D57121592
Pulled By: pdillinger
fbshipit-source-id: 55727355a7662e67efcd22d7e353153e78e24f59
Summary:
This also updates WriteBatch's protection info to include write time since there are several places in memtable that by default protects the whole value slice.
This PR is stacked on https://github.com/facebook/rocksdb/issues/12543
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12559
Reviewed By: pdillinger
Differential Revision: D56308285
Pulled By: jowlyzhang
fbshipit-source-id: 5524339fe0dd6c918dc940ca2f0657b5f2111c56
Summary:
Made `BlockBasedTableOptions::block_align` incompatible (i.e., APIs will return `Status::InvalidArgument`) with more ways of enabling compression: `CompactionOptions::compression`, `ColumnFamilyOptions::compression_per_level`, and `ColumnFamilyOptions::bottommost_compression`. Previously it was only incompatible with `ColumnFamilyOptions::compression`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12592
Reviewed By: hx235
Differential Revision: D56650862
Pulled By: ajkr
fbshipit-source-id: f5201602c2ce436e6d8d30893caa6a161a61f141
Summary:
`MultiOpsTxnsStressTest` relies on snapshot which is incompatible with `inplace_update_support`. TransactionDB uses snapshot too so we don't expect it to be used with `inplace_update_support` either.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12586
Test Plan:
```
python3 tools/db_crashtest.py whitebox --[test_multiops_txn|txn] --txn_write_policy=1
```
Reviewed By: hx235
Differential Revision: D56602769
Pulled By: cbi42
fbshipit-source-id: 8778541295f0af71e8ce912c8f872ab5cc607fc1
Summary:
**Context/Summary:**
Our crash test recently surfaced incompatibilities between DeleteRange and inplace_update_support. Incorrect read result will be returned after insertion into memtables already contain delete range data.
This PR is to clarify this in API and re-enable `inplace_update_support` in crash test with sanitization.
Ideally there should be a way to check memtable for delete range entry upon put under inplace_update_support = true
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12577
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56492556
Pulled By: hx235
fbshipit-source-id: 9e80e5c69dd708716619a266f41580959680c83b
Summary:
**Context/Summary:**
Our recent crash test failures show inplace_update_support can cause DB to return value inconsistent with expected state upon crash recovery if delete range was used in the previous run AND inplace_update_support=true is used in either previous or the current verification run. Since it's a bit hard to keep track of whether previous run has used delete range or not, I decided to temporarily disable inplace_update_support in crash test to keep crash test stabilized before figuring why these two features are incompatible and how to prevent such combination in crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12574
Test Plan: Rehearsed many stress run with `inplace_update_support=0` and they passed
Reviewed By: jaykorean
Differential Revision: D56454951
Pulled By: hx235
fbshipit-source-id: 57f2ae6308bad7ed4077ddb9e658380742afa293
Summary:
**Context/Summary:**
In-place memtable updates (inplace_update_support) is not compatible with concurrent writes (allow_concurrent_memtable_write). So we disallow this combination in crash test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12550
Test Plan: CI
Reviewed By: jaykorean
Differential Revision: D56204269
Pulled By: hx235
fbshipit-source-id: 06608f2591db5e37470a1da6afcdfd2701781c2d
Summary:
**Context/Summary:**
This PR includes some public DB APIs not tested in crash/stress yet can be added in a straightforward way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12541
Test Plan:
- Locally run crash test heavily stressing on these new APIs
- CI
Reviewed By: jowlyzhang
Differential Revision: D56164892
Pulled By: hx235
fbshipit-source-id: 8bb568c3e65aec39d642987033f1d76c52f69bd8
Summary:
**Context/Summary:**
`inplace_update_support=true` is not tested in crash/stress test. Since it's not compatible with snapshots like compaction_filter, we need to sanitize its value in presence of snapshots-related options. A minor refactoring is added to centralize such sanitization in db_crashtest.py - see `check_multiget_consistency` and `check_multiget_entity_consistency`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12535
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D56102978
Pulled By: hx235
fbshipit-source-id: 2e2ab6685a65123b14a321b99f45f60bc6509c6b
Summary:
Context/Summary:
We need a `nvm_sec_cache` when `kAdmPolicyThreeQueue` is used otherwise a nullptr cache will be accessed causing us segfault in https://github.com/facebook/rocksdb/pull/12521
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12524
Test Plan: - Re-enabled `kAdmPolicyThreeQueue` and rehearsed stress test that failed before this fix and pass after
Reviewed By: jowlyzhang
Differential Revision: D55997093
Pulled By: hx235
fbshipit-source-id: e1c6f1015091b4cff0ce6a3fff981d5dece52a62
Summary:
**Context/Summary**
This policy leads to segfault in `CompressedCacheSetCapacityThread` with some build/compilation. Before figuring out the why, disable it for now.
**Test**
Rehearse stress test that failed before the fix but passes after
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12521
Reviewed By: jowlyzhang
Differential Revision: D55942399
Pulled By: hx235
fbshipit-source-id: 85f28e50d596dcfd4a316481570b78fdce58ed0b
Summary:
**Context/Summary:**
This is to improve our crash test coverage.
Bonus change:
- Added the missing Options string mapping for `CacheTier::kVolatileCompressedTier`
- Deprecated crash test options `enable_tiered_storage` mainly for setting `last_level_temperature` which is now covered in crash test by itself
- Intensified `verify_checksum_one_in\verify_file_checksums_one_in` as I found out these together with new coverage surface more issues
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12508
Test Plan: CI to look out for trivial failures
Reviewed By: jowlyzhang
Differential Revision: D55768594
Pulled By: hx235
fbshipit-source-id: 9b829da0309a7db3fcdb17992a524dd64498325c
Summary:
Since some internal user might be interested in using this feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12506
Test Plan:
The option was disabled in stress test due to causing failures.
I've ran a round of crash tests internally and there was no failure due to parallel compression. Will monitor if more runs cause failures. So we will know at least how it's broken and decide to fix them or reverse the change.
Reviewed By: jowlyzhang
Differential Revision: D55747552
Pulled By: cbi42
fbshipit-source-id: ae5cda78c338b8b58f651c557d9b70790362444d
Summary:
**Context/Summary:**
`wal_bytes_per_sync > 0` can sync newer WAL but not an older WAL by its nature. This creates a hole in synced WAL data. By our crash test, we recently discovered that our DB can recover past that hole. This resulted in crash-recovery-verification error. Before we fix that recovery behavior, we will temporarily disable `wal_bytes_per_sync` in crash test
Bonus: updated the API to make the nature of this option more explicitly documented
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12489
Test Plan: More stabilized crash test
Reviewed By: ajkr
Differential Revision: D55531589
Pulled By: hx235
fbshipit-source-id: 6dea6486420dc0f50550d488c15652f93972a0ea
Summary:
Previously it was uninitialized. Setting `checksum_handoff_file_types` will cause `kCRC32c` checksums to be passed down in the `DataVerificationInfo`, so it makes sense for `kCRC32c` to be the default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12485
Test Plan:
ran `db_stress` in a way that failed before. Building with ASAN was needed to ensure the uninitialized bytes are nonzero according to `malloc_fill_byte` (default 0xbe)
```
$ COMPILE_WITH_ASAN=1 make -j28 db_stress
...
$ ./db_stress -sync_fault_injection=1 -enable_checksum_handoff=true
```
Reviewed By: jaykorean
Differential Revision: D55450587
Pulled By: ajkr
fbshipit-source-id: 53dc829b86e49b3fa80570032e83af0bb12adaad
Summary:
This option was previously disabled due to a bug in the recovery logic. The recovery code in `DBImpl::RecoverLogFiles` couldn't tell if an EoF reported by the log reader was really an EoF or a possible corruption that made a record look like an old log record. To fix this, the log reader now explicitly reports when it encounters what looks like an old record. The recovery code treats it as a possible corruption, and uses the next sequence number in the WAL to determine if it should continue replaying the WAL.
This PR also fixes a couple of bugs that log file recycling exposed in the backup and checkpoint path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12403
Test Plan:
1. Add new unit tests to verify behavior upon corruption
2. Re-enable disabled tests for verifying recycling behavior
Reviewed By: ajkr
Differential Revision: D54544824
Pulled By: anand1976
fbshipit-source-id: 12f5ce39bd6bc0d63b0bc6432dc4db510e0e802a
Summary:
with https://github.com/facebook/rocksdb/issues/12414 enabling `ReadOptions::pin_data`, this bug surfaced as corrupted per key-value checksum during crash test. `saved_key_.GetUserKey()` could be pinned user key, so DBIter should not overwrite it.
In one case, it only surfaces when iterator skips many keys of the same user key. To stress that code path, this PR also added `max_sequential_skip_in_iterations` to crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12451
Test Plan:
- Set ReadOptions::pin_data to true, the bug can be reproed quickly with `./db_stress --persist_user_defined_timestamps=1 --user_timestamp_size=8 --writepercent=35 --delpercent=4 --delrangepercent=1 --iterpercent=20 --nooverwritepercent=1 --prefix_size=8 --prefixpercent=10 --readpercent=30 --memtable_protection_bytes_per_key=8 --block_protection_bytes_per_key=2 --clear_column_family_one_in=0`.
- Set max_sequential_skip_in_iterations to 1 for the other occurrence of the bug.
Reviewed By: jowlyzhang
Differential Revision: D55003766
Pulled By: cbi42
fbshipit-source-id: 23e1049129456684dafb028b6132b70e0afc07fb
Summary:
since it been causing a few crash tests failures, I suspect it'll be easy to repro locally. Also fixed how to print its corruption message so it does not crash with output cannot be utf-8 decoded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12431
Reviewed By: hx235
Differential Revision: D54881023
Pulled By: cbi42
fbshipit-source-id: 47208a637cd69b30d2545154849405e37db62ed3
Summary:
**Context/Summary:**
We are doing a sweep in all public options, including but not limited to the `Options`, `Read/WriteOptions`, `IngestExternalFileOptions`, cache options.., to find and add the uncovered ones into db crash. The options included in this PR require minimum changes to db crash other than adding the options themselves.
A bonus change: to surface new issues by improved coverage in stderror, we decided to fail/terminate crash test for manual compactions (CompactFiles, CompactRange()) on meaningful errors. See https://github.com/facebook/rocksdb/pull/12414/files#diff-5c4ced6afb6a90e27fec18ab03b2cd89e8f99db87791b4ecc6fa2694284d50c0R2528-R2532, https://github.com/facebook/rocksdb/pull/12414/files#diff-5c4ced6afb6a90e27fec18ab03b2cd89e8f99db87791b4ecc6fa2694284d50c0R2330-R2336 for more.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12414
Test Plan:
- Run `python3 ./tools/db_crashtest.py --simple blackbox` for 10 minutes to ensure no trivial failure
- Run `python3 tools/db_crashtest.py --simple blackbox --compact_files_one_in=1 --compact_range_one_in=1 --read_fault_one_in=1 --write_fault_one_in=1 --interval=50` for a while to ensure the bonus change does not result in trivial crash/termination of stress test
Reviewed By: ajkr, jowlyzhang, cbi42
Differential Revision: D54691774
Pulled By: hx235
fbshipit-source-id: 50443dfb6aaabd8e24c79a2e42b68c6de877be88
Summary:
This PR updates `VersionEditHandlerPointInTime` to recover all or none of the updates in an AtomicGroup. This makes best-effort recovery properly handle atomic flushes during recovery, so the features are now allowed to both be enabled at once.
The new logic requires that AtomicGroups do not contain column family additions or removals. AtomicGroups are currently written for atomic flush, which does not include such edits.
Column family additions or removals are recovered independently of AtomicGroups. The new logic needs to be aware of removal, though, so that a dropped CF does not prevent completion of an AtomicGroup recovery.
The new logic treats each AtomicGroup as if it contains updates for all existing column families, even though it is possible to create AtomicGroups that only affect a subset of column families. This simplifies the logic at the expense of recovering less data in certain edge case scenarios.
The usage of `MaybeCreateVersion()` is pretty tricky. The goal is to create a barrier at the start of an AtomicGroup such that all valid states up to that point will be applied to `versions_`. Here is a summary.
- `MaybeCreateVersion(..., false)` creates a `Version` on a negative edge trigger (transition from valid to invalid). It was previously called when applying each update. Now, it is only called when applying non-AtomicGroup updates.
- `MaybeCreateVersion(..., true)` creates a `Version` on a positive level trigger (valid state). It was previously called only at the end of iteration. Now, it is additionally called before processing an AtomicGroup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12406
Reviewed By: jaykorean, cbi42
Differential Revision: D54494904
Pulled By: ajkr
fbshipit-source-id: 0114a9fe1d04b471d086dcab5978ea8a3a56ad52
Summary:
Some of the errors like data race and heap-after-use are error out based on crash test reporting them as error by relying on stderr. So reverting back to original form unless we come up with a more reliable solution to error out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12335
Reviewed By: cbi42
Differential Revision: D53534781
Pulled By: akankshamahajan15
fbshipit-source-id: b19aa560d1560ac2281f7bc04e13961ed751f178
Summary:
For the user defined timestamps in memtable only feature, some special handling for range deletion blocks are needed since both the key (start_key) and the value (end_key) of a range tombstone can contain user-defined timestamps. Handling for the key is taken care of in the same way as the other data blocks in the block based table. This PR adds the special handling needed for the value (end_key) part. This includes:
1) On the write path, when L0 SST files are first created from flush, user-defined timestamps are removed from an end key of a range tombstone. There are places where it's logically removed (replaced with a min timestamp) because there is still logic with the running comparator that expects a user key that contains timestamp. And in the block based builder, it is eventually physically removed before persisted in a block.
2) On the read path, when range deletion block is being read, we artificially pad a min timestamp to the end key of a range tombstone in `BlockBasedTableReader`.
3) For file boundary `FileMetaData.largest`, we artificially pad a max timestamp to it if it contains a range deletion sentinel. Anytime when range deletion end_key is used to update file boundaries, it's using max timestamp instead of the range tombstone's actual timestamp to mark it as an exclusive end. d69628e6ce/db/dbformat.h (L923-L935)
This max timestamp is removed when in memory `FileMetaData.largest` is persisted into Manifest, we pad it back when it's read from Manifest while handling related `VersionEdit` in `VersionEditHandler`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12254
Test Plan: Added unit test and enabled this feature combination's stress test.
Reviewed By: cbi42
Differential Revision: D52965527
Pulled By: jowlyzhang
fbshipit-source-id: e8315f8a2c5268e2ae0f7aec8012c266b86df985
Summary:
While working on Meta's internal test triaging process, I found that `db_crashtest.py` was printing out `stdout` and `stderr` altogether. Adding an option to print `stderr` separately so that it's easy to extract only `stderr` from the test run.
`print_stderr_separately` is introduced as an optional parameter with default value `False` to keep the existing behavior as is (except a few minor changes).
Minor changes to the existing behavior
- We no longer print `stderr has error message:` and `***` prefix to each line. We simply print `stderr:` before printing `stderr` if stderr is printed in stdout and print `stderr` as is.
- We no longer print `times error occurred in output is ...` which doesn't appear to have any values
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12301
Test Plan:
**Default Behavior (blackbox)**
Run printed everything as is
```
$> python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 2> /tmp/error.log
Running blackbox-crash-test with
interval_between_crash=120
total-duration=6000
...
Integrated BlobDB: blob files enabled 0, min blob size 0, blob file size 268435456, blob compression type NoCompression, blob GC enabled 0, cutoff 0.250000, force threshold 1.000000, blob compaction readahead size 0, blob file starting level 0
Integrated BlobDB: blob cache disabled
DB path: [/tmp/jewoongh/rocksdb_crashtest_blackboxwh7yxpec]
(Re-)verified 0 unique IDs
2024/01/29-09:16:30 Initializing worker threads
Crash-recovery verification passed :)
2024/01/29-09:16:35 Starting database operations
2024/01/29-09:16:35 Starting verification
Stress Test : 543.600 micros/op 8802 ops/sec
: Wrote 0.00 MB (0.27 MB/sec) (50% of 10 ops)
: Wrote 5 times
: Deleted 1 times
: Single deleted 0 times
: 4 read and 0 found the key
: Prefix scanned 0 times
: Iterator size sum is 0
: Iterated 0 times
: Deleted 0 key-ranges
: Range deletions covered 0 keys
: Got errors 0 times
: 0 CompactFiles() succeed
: 0 CompactFiles() did not succeed
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
Error : jewoongh injected test error This is not a real failure.
Verification failed :(
```
Nothing in stderr
```
$> cat /tmp/error.log
```
**Default Behavior (whitebox)**
Run printed everything as is
```
$> python3 tools/db_crashtest.py whitebox --simple --max_key=25000000 --write_buffer_size=4194304 2> /tmp/error.log
Running whitebox-crash-test with
total-duration=10000
...
(Re-)verified 571 unique IDs
2024/01/29-09:33:53 Initializing worker threads
Crash-recovery verification passed :)
2024/01/29-09:35:16 Starting database operations
2024/01/29-09:35:16 Starting verification
Stress Test : 97248.125 micros/op 10 ops/sec
: Wrote 0.00 MB (0.00 MB/sec) (12% of 8 ops)
: Wrote 1 times
: Deleted 0 times
: Single deleted 0 times
: 4 read and 1 found the key
: Prefix scanned 1 times
: Iterator size sum is 120868
: Iterated 4 times
: Deleted 0 key-ranges
: Range deletions covered 0 keys
: Got errors 0 times
: 0 CompactFiles() succeed
: 0 CompactFiles() did not succeed
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
Error : jewoongh injected test error This is not a real failure.
New cache capacity = 4865393
Verification failed :(
TEST FAILED. See kill option and exit code above!!!
```
Nothing in stderr
```
$> cat /tmp/error.log
```
**New option added (blackbox)**
```
$> python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --print_stderr_separately 2> /tmp/error.log
Running blackbox-crash-test with
interval_between_crash=120
total-duration=6000
...
Integrated BlobDB: blob files enabled 0, min blob size 0, blob file size 268435456, blob compression type NoCompression, blob GC enabled 0, cutoff 0.250000, force threshold 1.000000, blob compaction readahead size 0, blob file starting level 0
Integrated BlobDB: blob cache disabled
DB path: [/tmp/jewoongh/rocksdb_crashtest_blackbox7ybna32z]
(Re-)verified 0 unique IDs
Compaction filter factory: DbStressCompactionFilterFactory
2024/01/29-09:05:39 Initializing worker threads
Crash-recovery verification passed :)
2024/01/29-09:05:46 Starting database operations
2024/01/29-09:05:46 Starting verification
Stress Test : 235.917 micros/op 16000 ops/sec
: Wrote 0.00 MB (0.16 MB/sec) (16% of 12 ops)
: Wrote 2 times
: Deleted 1 times
: Single deleted 0 times
: 9 read and 0 found the key
: Prefix scanned 0 times
: Iterator size sum is 0
: Iterated 0 times
: Deleted 0 key-ranges
: Range deletions covered 0 keys
: Got errors 0 times
: 0 CompactFiles() succeed
: 0 CompactFiles() did not succeed
```
stderr printed separately
```
$> cat /tmp/error.log
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
Error : jewoongh injected test error This is not a real failure.
New cache capacity = 19461571
Verification failed :(
```
**New option added (whitebox)**
```
$> python3 tools/db_crashtest.py whitebox --simple --max_key=25000000 --write_buffer_size=4194304 --print_stderr_separately 2> /tmp/error.log
Running whitebox-crash-test with
total-duration=10000
...
Integrated BlobDB: blob files enabled 0, min blob size 0, blob file size 268435456, blob compression type NoCompression, blob GC enabled 0, cutoff 0.250000, force threshold 1.000000, blob compaction readahead size 0, blob file starting level 0
Integrated BlobDB: blob cache disabled
DB path: [/tmp/jewoongh/rocksdb_crashtest_whiteboxtwj0ihn6]
(Re-)verified 157 unique IDs
2024/01/29-09:39:59 Initializing worker threads
Crash-recovery verification passed :)
2024/01/29-09:40:16 Starting database operations
2024/01/29-09:40:16 Starting verification
Stress Test : 742.474 micros/op 11801 ops/sec
: Wrote 0.00 MB (0.27 MB/sec) (36% of 19 ops)
: Wrote 7 times
: Deleted 1 times
: Single deleted 0 times
: 8 read and 0 found the key
: Prefix scanned 0 times
: Iterator size sum is 0
: Iterated 4 times
: Deleted 0 key-ranges
: Range deletions covered 0 keys
: Got errors 0 times
: 0 CompactFiles() succeed
: 0 CompactFiles() did not succeed
TEST FAILED. See kill option and exit code above!!!
```
stderr printed separately
```
$> cat /tmp/error.log
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
Error : jewoongh injected test error This is not a real failure.
Error : jewoongh injected test error This is not a real failure.
Error : jewoongh injected test error This is not a real failure.
New cache capacity = 4865393
Verification failed :(
```
Reviewed By: akankshamahajan15
Differential Revision: D53187491
Pulled By: jaykorean
fbshipit-source-id: 76f9100d08b96d014e41b7b88b206d69f0ae932b
Summary:
Right now crash_test relies on std::errors too to check for only errors/failures along with verification. However, that's not a reliable solution and many internal services logs benign errors/warnings in which case our test script fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12265
Test Plan: Keep std::errors but printout instead of failing and will monitor crash tests internally to see if there is any scenario which solely relies on std::error, in which case stress tests can be improve.
Reviewed By: ajkr, cbi42
Differential Revision: D52967000
Pulled By: akankshamahajan15
fbshipit-source-id: 5328c8b69480c7946fe6a9c72f9ffeede70ac2ad
Summary:
Currently, we treat the long-running whitebox_crash_test as passing. However, we were not cleaning up after ourselves when we killed the running test for running too long, which often caused out-of-space errors in subsequent tests (e.g., blackbox_crash_test after whitebox_crash_test).
Unless we want to start treating these timeouts as failures and need the DB output for investigation now, we should properly clean up the tmp dir.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12248
Test Plan:
```
$> make crash_test -j
```
Reviewed By: ajkr
Differential Revision: D52885342
Pulled By: jaykorean
fbshipit-source-id: 7c1f2ca7cf03d0705bb14155ee44d5d7a411c132
Summary:
We test LockWAL() and UnlockWAL() by checking that latest sequence number is not changed: 1a1f9f1660/db_stress_tool/db_stress_test_base.cc (L920-L937). With writeprepared transaction, sequence number can be advanced in SwitchMemtable::WriteRecoverableState() when writing recoverable state: 1a1f9f1660/db/db_impl/db_impl_write.cc (L1560)
This PR disables LockWAL() tests for writeprepared transaction for now. We probably need to change how we test LockWAL() for writeprepared before re-enabling this test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12221
Reviewed By: ajkr
Differential Revision: D52677076
Pulled By: cbi42
fbshipit-source-id: 27ee694878edf63e8f4ad52f769d4db401f511bc
Summary:
This feature combination is not fully working yet. Disable them so the stress tests have less noise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12218
Reviewed By: cbi42
Differential Revision: D52643957
Pulled By: jowlyzhang
fbshipit-source-id: 8815a18a3b5814cad4f7ec41f3fb94869302081e
Summary:
**Context/Summary:**
Continued from https://github.com/facebook/rocksdb/pull/12127, we can randomly reduce the # max key to coerce more operations on the same key. My experimental run shows it surfaced more issue than just https://github.com/facebook/rocksdb/pull/12127.
I also randomly reduce the related parameters, write buffer size and target file base, to adapt to randomly lower number of # max key. This creates 4 situations of testing, 3 of which are new:
1. **high** # max key with **high** write buffer size and target file base (existing)
2. **high** # max key with **low** write buffer size and target file base (new, will go through some rehearsal testing to ensure we don't run out of space with many files)
3. **low** # max key with **high** write buffer size and target file base (new, keys will stay in memory longer)
4. **low** # max key with **low** write buffer size and target file base (new, experimental runs show it surfaced even more issues)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12148
Test Plan:
- [Ongoing] Rehearsal stress test
- Monitor production stress test
Reviewed By: jaykorean
Differential Revision: D52174980
Pulled By: hx235
fbshipit-source-id: bd5e11280826819ca9314c69bbbf05d481c6d105
Summary:
This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs.
This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably:
1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up.
2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that.
3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124
Test Plan: running multiple flavor of this test on continuous run for sometime before checkin
Reviewed By: ltamasi
Differential Revision: D51916267
Pulled By: jowlyzhang
fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
Summary:
**Context/Summary:**
My experimental stress runs with more frequent "xxx_one_in" surfaced a couple interesting bugs/issues with RocksDB or crash test framework in the past. We now consider changing the default value so they are run more frequently in production testing environment.
Increase frequency by 2 orders of magnitude for most parameters, except for error-prone features e.g, manual compaction and file ingestion (increased by 3 orders) and expensive features e.g, checksum verification (increased by 1 order)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12127
Test Plan: Monitor CI to see if it did surface more interesting bugs/issues. If not, we may consider intensify even more.
Reviewed By: pdillinger
Differential Revision: D51954235
Pulled By: hx235
fbshipit-source-id: 92046cb7c52a37212f19ab7965b40f77b90b08b1
