mirror of https://github.com/facebook/rocksdb.git
88 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Yu Zhang
|
c73cf7a878 |
Add CompactForTieringCollector to support automatically trigger compaction for tiering use case (#12760)
Summary: This PR adds user property collector factory `CompactForTieringCollectorFactory` to support observe SST file and mark it as need compaction for fast tracking data to the proper tier. A triggering ratio `compaction_trigger_ratio_` can be configured to achieve the following: 1) Setting the ratio to be equal to or smaller than 0 disables this collector 2) Setting the ratio to be within (0, 1] will write the number of observed eligible entries into a user property and marks a file as need-compaction when aforementioned condition is met. 3) Setting the ratio to be higher than 1 can be used to just writes the user table property, and not mark any file as need compaction. For a column family that does not enable tiering feature, even if an effective configuration is provided, this collector is still disabled. For a file that is already on the last level, this collector is also disabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12760 Test Plan: Added unit tests Reviewed By: pdillinger Differential Revision: D58734976 Pulled By: jowlyzhang fbshipit-source-id: 6daab2c4f62b5c6689c3c03e3b3907bbbe6b7a81 |
|
|
Andrew Kryczka
|
bf98dcf9a8 |
Fix kBlockCacheTier read when merge-chain base value is in a blob file (#12462)
Summary: The original goal is to propagate failures from `GetContext::SaveValue()` -> `GetContext::GetBlobValue()` -> `BlobFetcher::FetchBlob()` up to the user. This call sequence happens when a merge chain ends with a base value in a blob file. There's also fixes for bugs encountered along the way where non-ok statuses were ignored/overwritten, and a bit of plumbing work for functions that had no capability to return a status. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12462 Test Plan: A repro command ``` db=/dev/shm/dbstress_db ; exp=/dev/shm/dbstress_exp ; rm -rf $db $exp ; mkdir -p $db $exp ./db_stress \ --clear_column_family_one_in=0 \ --test_batches_snapshots=0 \ --write_fault_one_in=0 \ --use_put_entity_one_in=0 \ --prefixpercent=0 \ --read_fault_one_in=0 \ --readpercent=0 \ --reopen=0 \ --set_options_one_in=10000 \ --delpercent=0 \ --delrangepercent=0 \ --open_metadata_write_fault_one_in=0 \ --open_read_fault_one_in=0 \ --open_write_fault_one_in=0 \ --destroy_db_initially=0 \ --ingest_external_file_one_in=0 \ --iterpercent=0 \ --nooverwritepercent=0 \ --db=$db \ --enable_blob_files=1 \ --expected_values_dir=$exp \ --max_background_compactions=20 \ --max_bytes_for_level_base=2097152 \ --max_key=100000 \ --min_blob_size=0 \ --open_files=-1 \ --ops_per_thread=100000000 \ --prefix_size=-1 \ --target_file_size_base=524288 \ --use_merge=1 \ --value_size_mult=32 \ --write_buffer_size=524288 \ --writepercent=100 ``` It used to fail like: ``` ... frame https://github.com/facebook/rocksdb/issues/9: 0x00007fc63903bc93 libc.so.6`__GI___assert_fail(assertion="HasDefaultColumn(columns)", file="fbcode/internal_repo_rocksdb/repo/db/wide/wide_columns_helper.h", line=33, function="static const rocksdb::Slice &rocksdb::WideColumnsHelper::GetDefaultColumn(const rocksdb::WideColumns &)") at assert.c:101:3 frame https://github.com/facebook/rocksdb/issues/10: 0x00000000006f7e92 db_stress`rocksdb::Version::Get(rocksdb::ReadOptions const&, rocksdb::LookupKey const&, rocksdb::PinnableSlice*, rocksdb::PinnableWideColumns*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, rocksdb::Status*, rocksdb::MergeContext*, unsigned long*, rocksdb::PinnedIteratorsManager*, bool*, bool*, unsigned long*, rocksdb::ReadCallback*, bool*, bool) [inlined] rocksdb::WideColumnsHelper::GetDefaultColumn(columns=size=0) at wide_columns_helper.h:33 frame https://github.com/facebook/rocksdb/issues/11: 0x00000000006f7e76 db_stress`rocksdb::Version::Get(this=0x00007fc5ec763000, read_options=<unavailable>, k=<unavailable>, value=0x0000000000000000, columns=0x00007fc6035fd1d8, timestamp=<unavailable>, status=0x00007fc6035fd250, merge_context=0x00007fc6035fce40, max_covering_tombstone_seq=0x00007fc6035fce90, pinned_iters_mgr=0x00007fc6035fcdf0, value_found=0x0000000000000000, key_exists=0x0000000000000000, seq=0x0000000000000000, callback=0x0000000000000000, is_blob=0x0000000000000000, do_merge=<unavailable>) at version_set.cc:2492 frame https://github.com/facebook/rocksdb/issues/12: 0x000000000051e245 db_stress`rocksdb::DBImpl::GetImpl(this=0x00007fc637a86000, read_options=0x00007fc6035fcf60, key=<unavailable>, get_impl_options=0x00007fc6035fd000) at db_impl.cc:2408 frame https://github.com/facebook/rocksdb/issues/13: 0x000000000050cec2 db_stress`rocksdb::DBImpl::GetEntity(this=0x00007fc637a86000, _read_options=<unavailable>, column_family=<unavailable>, key=0x00007fc6035fd3c8, columns=0x00007fc6035fd1d8) at db_impl.cc:2109 frame https://github.com/facebook/rocksdb/issues/14: 0x000000000074f688 db_stress`rocksdb::(anonymous namespace)::MemTableInserter::MergeCF(this=0x00007fc6035fd450, column_family_id=2, key=0x00007fc6035fd3c8, value=0x00007fc6035fd3a0) at write_batch.cc:2656 frame https://github.com/facebook/rocksdb/issues/15: 0x00000000007476fc db_stress`rocksdb::WriteBatchInternal::Iterate(wb=0x00007fc6035fe698, handler=0x00007fc6035fd450, begin=12, end=<unavailable>) at write_batch.cc:607 frame https://github.com/facebook/rocksdb/issues/16: 0x000000000074d7dd db_stress`rocksdb::WriteBatchInternal::InsertInto(rocksdb::WriteThread::WriteGroup&, unsigned long, rocksdb::ColumnFamilyMemTables*, rocksdb::FlushScheduler*, rocksdb::TrimHistoryScheduler*, bool, unsigned long, rocksdb::DB*, bool, bool, bool) [inlined] rocksdb::WriteBatch::Iterate(this=<unavailable>, handler=0x00007fc6035fd450) const at write_batch.cc:505 frame https://github.com/facebook/rocksdb/issues/17: 0x000000000074d77b db_stress`rocksdb::WriteBatchInternal::InsertInto(write_group=<unavailable>, sequence=<unavailable>, memtables=<unavailable>, flush_scheduler=<unavailable>, trim_history_scheduler=<unavailable>, ignore_missing_column_families=<unavailable>, recovery_log_number=0, db=0x00007fc637a86000, concurrent_memtable_writes=<unavailable>, seq_per_batch=false, batch_per_txn=<unavailable>) at write_batch.cc:3084 frame https://github.com/facebook/rocksdb/issues/18: 0x0000000000631d77 db_stress`rocksdb::DBImpl::PipelinedWriteImpl(this=0x00007fc637a86000, write_options=<unavailable>, my_batch=0x00007fc6035fe698, callback=0x0000000000000000, log_used=<unavailable>, log_ref=0, disable_memtable=<unavailable>, seq_used=0x0000000000000000) at db_impl_write.cc:807 frame https://github.com/facebook/rocksdb/issues/19: 0x000000000062ceeb db_stress`rocksdb::DBImpl::WriteImpl(this=<unavailable>, write_options=<unavailable>, my_batch=0x00007fc6035fe698, callback=0x0000000000000000, log_used=<unavailable>, log_ref=0, disable_memtable=<unavailable>, seq_used=0x0000000000000000, batch_cnt=0, pre_release_callback=0x0000000000000000, post_memtable_callback=0x0000000000000000) at db_impl_write.cc:312 frame https://github.com/facebook/rocksdb/issues/20: 0x000000000062c8ec db_stress`rocksdb::DBImpl::Write(this=0x00007fc637a86000, write_options=0x00007fc6035feca8, my_batch=0x00007fc6035fe698) at db_impl_write.cc:157 frame https://github.com/facebook/rocksdb/issues/21: 0x000000000062b847 db_stress`rocksdb::DB::Merge(this=0x00007fc637a86000, opt=0x00007fc6035feca8, column_family=0x00007fc6370bf140, key=0x00007fc6035fe8d8, value=0x00007fc6035fe830) at db_impl_write.cc:2544 frame https://github.com/facebook/rocksdb/issues/22: 0x000000000062b6ef db_stress`rocksdb::DBImpl::Merge(this=0x00007fc637a86000, o=<unavailable>, column_family=0x00007fc6370bf140, key=0x00007fc6035fe8d8, val=0x00007fc6035fe830) at db_impl_write.cc:72 frame https://github.com/facebook/rocksdb/issues/23: 0x00000000004d6397 db_stress`rocksdb::NonBatchedOpsStressTest::TestPut(this=0x00007fc637041000, thread=0x00007fc6370dbc00, write_opts=0x00007fc6035feca8, read_opts=0x00007fc6035fe9c8, rand_column_families=<unavailable>, rand_keys=size=1, value={P\xe9_\x03\xc6\x7f\0\0}) at no_batched_ops_stress.cc:1317 frame https://github.com/facebook/rocksdb/issues/24: 0x000000000049361d db_stress`rocksdb::StressTest::OperateDb(this=0x00007fc637041000, thread=0x00007fc6370dbc00) at db_stress_test_base.cc:1148 ... ``` Reviewed By: ltamasi Differential Revision: D55157795 Pulled By: ajkr fbshipit-source-id: 5f7c1380ead5794c29d41680028e34b839744764 |
|
|
Peter Dillinger
|
1d6dbfb8b7 |
Rename IntTblPropCollector -> InternalTblPropColl (#12320)
Summary: I've always found this name difficult to read, because it sounds like it's for collecting int(eger) table properties. I'm fixing this now to set up for a change that I have stubbed out in the public API (table_properties.h): a new adapter function `TablePropertiesCollector::AsInternal()` that allows RocksDB-provided TablePropertiesCollectors (such as CompactOnDeletionCollector) to implement the easier-to-upgrade internal interface while still (superficially) implementing the public interface. In addition to added flexibility, this should be a performance improvement as the adapter class UserKeyTablePropertiesCollector can be avoided for such cases where a RocksDB-provided collector is used (AsInternal() returns non-nullptr). table_properties.h is the only file with changes that aren't simple find-replace renaming. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12320 Test Plan: existing tests, CI Reviewed By: ajkr Differential Revision: D53336945 Pulled By: pdillinger fbshipit-source-id: 02535bcb30bbfb00e29e8478af62e5dad50a63b8 |
|
|
Peter Dillinger
|
76c834e441 |
Remove 'virtual' when implied by 'override' (#12319)
Summary:
... to follow modern C++ style / idioms.
Used this hack:
```
for FILE in `cat my_list_of_files`; do perl -pi -e 'BEGIN{undef $/;} s/ virtual( [^;{]* override)/$1/smg' $FILE; done
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12319
Test Plan: existing tests, CI
Reviewed By: jaykorean
Differential Revision: D53275303
Pulled By: pdillinger
fbshipit-source-id: bc0881af270aa8ef4d0ae4f44c5a6614b6407377
|
|
|
Peter Dillinger
|
4e60663b31 |
Remove unnecessary, confusing 'extern' (#12300)
Summary: In C++, `extern` is redundant in a number of cases: * "Global" function declarations and definitions * "Global" variable definitions when already declared `extern` For consistency and simplicity, I've removed these in code that *we own*. In a couple of cases, I removed obsolete declarations, and for MagicNumber constants, I have consolidated the declarations into a header file (format.h) as standard best practice would prescribe. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12300 Test Plan: no functional changes, CI Reviewed By: ajkr Differential Revision: D53148629 Pulled By: pdillinger fbshipit-source-id: fb8d927959892e03af09b0c0d542b0a3b38fd886 |
|
|
Peter Dillinger
|
cb08a682d4 |
Fix/cleanup SeqnoToTimeMapping (#12253)
Summary: The SeqnoToTimeMapping class (RocksDB internal) used by the preserve_internal_time_seconds / preclude_last_level_data_seconds options was essentially in a prototype state with some significant flaws that would risk biting us some day. This is a big, complicated change because both the implementation and the behavioral requirements of the class needed to be upgraded together. In short, this makes SeqnoToTimeMapping more internally responsible for maintaining good invariants, so that callers don't easily encounter dangerous scenarios. * Some API functions were confusingly named and structured, so I fully refactored the APIs to use clear naming (e.g. `DecodeFrom` and `CopyFromSeqnoRange`), object states, function preconditions, etc. * Previously the object could informally be sorted / compacted or not, and there was limited checking or enforcement on these states. Now there's a well-defined "enforced" state that is consistently checked in debug mode for applicable operations. (I attempted to create a separate "builder" class for unenforced states, but IIRC found that more cumbersome for existing uses than it was worth.) * Previously operations would coalesce data in a way that was better for `GetProximalTimeBeforeSeqno` than for `GetProximalSeqnoBeforeTime` which is odd because the latter is the only one used by DB code currently (what is the seqno cut-off for data definitely older than this given time?). This is now reversed to consistently favor `GetProximalSeqnoBeforeTime`, with that logic concentrated in one place: `SeqnoToTimeMapping::SeqnoTimePair::Merge()`. Unfortunately, a lot of unit test logic was specifically testing the old, suboptimal behavior. * Previously, the natural behavior of SeqnoToTimeMapping was to THROW AWAY data needed to get reasonable answers to the important `GetProximalSeqnoBeforeTime` queries. This is because SeqnoToTimeMapping only had a FIFO policy for staying within the entry capacity (except in aggregate+sort+serialize mode). If the DB wasn't extremely careful to avoid gathering too many time mappings, it could lose track of where the seqno cutoff was for cold data (`GetProximalSeqnoBeforeTime()` returning 0) and preventing all further data migration to the cold tier--until time passes etc. for mappings to catch up with FIFO purging of them. (The problem is not so acute because SST files contain relevant snapshots of the mappings, but the problem would apply to long-lived memtables.) * Now the SeqnoToTimeMapping class has fully-integrated smarts for keeping a sufficiently complete history, within capacity limits, to give good answers to `GetProximalSeqnoBeforeTime` queries. * Fixes old `// FIXME: be smarter about how we erase to avoid data falling off the front prematurely.` * Fix an apparent bug in how entries are selected for storing into SST files. Previously, it only selected entries within the seqno range of the file, but that would easily leave a gap at the beginning of the timeline for data in the file for the purposes of answering GetProximalXXX queries with reasonable accuracy. This could probably lead to the same problem discussed above in naively throwing away entries in FIFO order in the old SeqnoToTimeMapping. The updated testing of GetProximalSeqnoBeforeTime in BasicSeqnoToTimeMapping relies on the fixed behavior. * Fix a potential compaction CPU efficiency/scaling issue in which each compaction output file would iterate over and sort all seqno-to-time mappings from all compaction input files. Now we distill the input file entries to a constant size before processing each compaction output file. Intended follow-up (me or others): * Expand some direct testing of SeqnoToTimeMapping APIs. Here I've focused on updating existing tests to make sense. * There are likely more gaps in availability of needed SeqnoToTimeMapping data when the DB shuts down and is restarted, at least with WAL. * The data tracked in the DB could be kept more accurate and limited if it used the oldest seqno of unflushed data. This might require some more API refactoring. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12253 Test Plan: unit tests updated Reviewed By: jowlyzhang Differential Revision: D52913733 Pulled By: pdillinger fbshipit-source-id: 020737fcbbe6212f6701191a6ab86565054c9593 |
|
|
Hui Xiao
|
06e593376c |
Group SST write in flush, compaction and db open with new stats (#11910)
Summary: ## Context/Summary Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity. For that, this PR does the following: - Tag different write IOs by passing down and converting WriteOptions to IOOptions - Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS Some related code refactory to make implementation cleaner: - Blob stats - Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info. - Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write. - Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority - Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification - Build table - TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables - Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder. This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more - Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority ## Test ### db bench Flush ``` ./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100 rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377 rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 ``` compaction, db oopen ``` Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279 rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0 rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213 rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66 ``` blob stats - just to make sure they aren't broken by this PR ``` Integrated Blob DB Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1 pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600 rocksdb.blobdb.blob.file.synced COUNT : 1 rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same) ``` ``` Stacked Blob DB Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench pre-PR: rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876 rocksdb.blobdb.blob.file.synced COUNT : 8 rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 post-PR: rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924 - COUNT is higher and values are smaller as it includes header and footer write - COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164 rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same) rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same) ``` ### Rehearsal CI stress test Trigger 3 full runs of all our CI stress tests ### Performance Flush ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark; enable_statistics = true Pre-pr: avg 507515519.3 ns 497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908, Post-pr: avg 511971266.5 ns, regressed 0.88% 502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408, ``` Compaction ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 495346098.30 ns 492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846 Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97% 502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007 ``` Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats) ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000 -- default: 1 thread is used to run benchmark Pre-pr: avg 3848.10 ns 3814,3838,3839,3848,3854,3854,3854,3860,3860,3860 Post-pr: avg 3874.20 ns, regressed 0.68% 3863,3867,3871,3874,3875,3877,3877,3877,3880,3881 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910 Reviewed By: ajkr Differential Revision: D49788060 Pulled By: hx235 fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff |
|
|
Peter Dillinger
|
c96d9a0fbb |
Allow TablePropertiesCollectorFactory to return null collector (#12129)
Summary: As part of building another feature, I wanted this: * Custom implementations of `TablePropertiesCollectorFactory` may now return a `nullptr` collector to decline processing a file, reducing callback overheads in such cases. * Polished, clarified some related API comments. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12129 Test Plan: unit test added Reviewed By: ltamasi Differential Revision: D51966667 Pulled By: pdillinger fbshipit-source-id: 2991c08fe6ce3a8c9f14c68f1495f5a17bca2770 |
|
|
Andrew Kryczka
|
06dc32ef25 |
internal_repo_rocksdb (435146444452818992) (#12115)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/12115 Reviewed By: jowlyzhang Differential Revision: D51745742 Pulled By: ajkr fbshipit-source-id: 67000d07783b413924798dd9c1751da27e119d53 |
|
|
Hui Xiao
|
f337533b6f |
Ensure and clarify how RocksDB calls TablePropertiesCollector's functions (#12053)
Summary: **Context/Summary:** It's intuitive for users to assume `TablePropertiesCollector::Finish()` is called only once by RocksDB internal by the word "finish". However, this is currently not true as RocksDB also calls this function in `BlockBased/PlainTableBuilder::GetTableProperties()` to populate user collected properties on demand. This PR avoids that by moving that populating to where we first call `Finish()` (i.e, `NotifyCollectTableCollectorsOnFinish`) Bonus: clarified in the API that `GetReadableProperties()` will be called after `Finish()` and added UT to ensure that. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12053 Test Plan: - Modified test `DBPropertiesTest.GetUserDefinedTableProperties` to ensure `Finish()` only called once. - Existing test particularly `db_properties_test, table_properties_collector_test` verify the functionality `NotifyCollectTableCollectorsOnFinish` and `GetReadableProperties()` are not broken by this change. Reviewed By: ajkr Differential Revision: D51095434 Pulled By: hx235 fbshipit-source-id: 1c6275258f9b99dedad313ee8427119126817973 |
|
|
Hui Xiao
|
9a034801ce |
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444)
Summary:
**Context/Summary:**
- Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`.
- For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation)
- New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main.
- Misc
- More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority`
- Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444
Test Plan:
- CI fake db crash/stress test
- Microbenchmarking
**Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench`
- google benchmark version:
|
|
|
Peter Dillinger
|
7a1b0207e6 |
format_version=6 and context-aware block checksums (#9058)
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
|
|
|
zhangyuxiang.ax
|
1567108fc1 |
Add missing table properties in plaintable GetTableProperties() (#11267)
Summary:
Plaintable will miss properties.
It should have some behavior like blockbasedtable.
Here is a unit test for reproduce this bug.
```
#include <gflags/gflags.h>
#include "rocksdb/db.h"
#include "rocksdb/options.h"
#include "rocksdb/table.h"
#include "rocksdb/slice_transform.h"
#include <iostream>
#include <thread>
#include <csignal>
const std::string kKey = "key";
DEFINE_bool(use_plaintable, true, "use plain table");
DEFINE_string(db_path, "/dev/shm/test_zyx_path", "db_path");
rocksdb::DB* db = nullptr;
class NoopTransform : public rocksdb::SliceTransform {
public:
explicit NoopTransform() {
}
virtual const char* Name() const override {
return "rocksdb.Noop";
}
virtual rocksdb::Slice Transform(const rocksdb::Slice& src) const override {
return src;
}
virtual bool InDomain(const rocksdb::Slice& src) const override {
return true;
}
virtual bool InRange(const rocksdb::Slice& dst) const override {
return true;
}
virtual bool SameResultWhenAppended(const rocksdb::Slice& prefix) const override {
return false;
}
};
class TestPropertiesCollector : public ::rocksdb::TablePropertiesCollector {
public:
explicit TestPropertiesCollector() {
}
private:
::rocksdb::Status AddUserKey(const ::rocksdb::Slice& key, const ::rocksdb::Slice& value, ::rocksdb::EntryType type,
::rocksdb::SequenceNumber seq, uint64_t file_size) override {
count++;
return ::rocksdb::Status::OK();
}
::rocksdb::Status Finish(::rocksdb::UserCollectedProperties* properties) override {
properties->insert({kKey, std::to_string(count)});
return ::rocksdb::Status::OK();
}
::rocksdb::UserCollectedProperties GetReadableProperties() const override {
::rocksdb::UserCollectedProperties properties;
properties.insert({kKey, std::to_string(count)});
return properties;
}
const char* Name() const override {
return "TestPropertiesCollector";
}
int count = 0;
};
class TestTablePropertiesCollectorFactory : public ::rocksdb::TablePropertiesCollectorFactory {
public:
explicit TestTablePropertiesCollectorFactory() {
}
private:
::rocksdb::TablePropertiesCollector* CreateTablePropertiesCollector(
::rocksdb::TablePropertiesCollectorFactory::Context context) override {
return new TestPropertiesCollector();
}
const char* Name() const override {
return "test.TablePropertiesCollectorFactory";
}
};
class TestFlushListener : rocksdb::EventListener {
public:
const char* Name() const override {
return "TestFlushListener";
}
void OnFlushCompleted(rocksdb::DB* /*db*/, const rocksdb::FlushJobInfo& flush_job_info) override {
if (flush_job_info.table_properties.user_collected_properties.find(kKey) ==
flush_job_info.table_properties.user_collected_properties.end()) {
std::cerr << "OnFlushCompleted: properties not found" << std::endl;
return;
}
std::cerr << "OnFlushCompleted: properties found "
<< flush_job_info.table_properties.user_collected_properties.at(kKey) << std::endl;
}
explicit TestFlushListener() {
}
};
int main(int argc, char* argv[]) {
gflags::ParseCommandLineFlags(&argc, &argv, true);
rocksdb::DBOptions rocksdb_options;
std::shared_ptr<rocksdb::EventListener> flush_offset;
rocksdb_options.create_if_missing = true;
rocksdb_options.create_missing_column_families = true;
std::shared_ptr<::rocksdb::TablePropertiesCollectorFactory> properties_collector(
new TestTablePropertiesCollectorFactory());
rocksdb::ColumnFamilyOptions cfoptions;
cfoptions.table_properties_collector_factories.emplace_back(properties_collector);
std::shared_ptr<rocksdb::EventListener> test_cleaner;
test_cleaner.reset((rocksdb::EventListener*)new TestFlushListener());
rocksdb_options.listeners.emplace_back(test_cleaner);
std::vector<rocksdb::ColumnFamilyDescriptor> cf_desc_;
cf_desc_.emplace_back(rocksdb::kDefaultColumnFamilyName, cfoptions);
std::vector<rocksdb::ColumnFamilyHandle*> cfhs;
cfoptions.prefix_extractor.reset(new NoopTransform());
if (FLAGS_use_plaintable) {
cfoptions.table_factory.reset(rocksdb::NewPlainTableFactory());
std::cerr << "use plaintable" << std::endl;
} else {
cfoptions.table_factory.reset(rocksdb::NewBlockBasedTableFactory());
std::cerr << "use blockbasedtable" << std::endl;
}
auto s = rocksdb::DB::Open(rocksdb_options, FLAGS_db_path, cf_desc_, &cfhs, &db);
if (s.ok()) {
rocksdb::WriteOptions wops;
wops.disableWAL = true;
for (int i = 0; i < 1000000; i++) {
auto status = db->Put(wops, std::to_string(i), std::string(1024, '3'));
if (!status.ok()) {
std::cerr << "write fail " << status.getState() << std::endl;
}
}
} else {
std::cerr << "open rocksdb failed" << s.getState() << std::endl;
}
std::this_thread::sleep_for(std::chrono::seconds(1000));
delete db;
}
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11267
Reviewed By: jowlyzhang
Differential Revision: D47689943
Pulled By: hx235
fbshipit-source-id: 585589cc48f8b26c7dd2323fc7ac4a0c3d4df6bb
|
|
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
|
|
Hui Xiao
|
6650ca244e |
Remove a couple deprecated convenience.h APIs (#11120)
Summary: **Context/Summary:** As instructed by convenience.h comments, a few deprecated APIs are removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120 Test Plan: - make check & CI - eyeball check on test semantics. Reviewed By: pdillinger Differential Revision: D42937507 Pulled By: hx235 fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1 |
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
anand76
|
727bad78b8 |
Format files under table/ by clang-format (#10852)
Summary: Run clang-format on files under the `table` directory. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10852 Reviewed By: ajkr Differential Revision: D40650732 Pulled By: anand1976 fbshipit-source-id: 2023a958e37fd6274040c5181130284600c9e0ef |
|
|
anand76
|
fb9a025892 |
Fix platform 10 build with folly (#10708)
Summary: Change the library order in PLATFORM_LDFLAGS to enable fbcode platform 10 build with folly. This PR also has a few fixes for platform 10 compiler errors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10708 Test Plan: ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_COROUTINES=1 make -j64 check ROCKSDB_FBCODE_BUILD_WITH_PLATFORM010=1 USE_FOLLY=1 make -j64 check Reviewed By: ajkr Differential Revision: D39666590 Pulled By: anand1976 fbshipit-source-id: 256a1127ef561399cd6299a6a392ca29bd68ca44 |
|
|
Jay Zhuang
|
a3acf2ef87 |
Add seqno to time mapping (#10338)
Summary: Which will be used for tiered storage to preclude hot data from compacting to the cold tier (the last level). Internally, adding seqno to time mapping. A periodic_task is scheduled to record the current_seqno -> current_time in certain cadence. When memtable flush, the mapping informaiton is stored in sstable property. During compaction, the mapping information are merged and get the approximate time of sequence number, which is used to determine if a key is recently inserted or not and preclude it from the last level if it's recently inserted (within the `preclude_last_level_data_seconds`). Pull Request resolved: https://github.com/facebook/rocksdb/pull/10338 Test Plan: CI Reviewed By: siying Differential Revision: D37810187 Pulled By: jay-zhuang fbshipit-source-id: 6953be7a18a99de8b1cb3b162d712f79c2b4899f |
|
|
mrambacher
|
204a42ca97 |
Added GetFactoryCount/Names/Types to ObjectRegistry (#9358)
Summary: These methods allow for more thorough testing of the ObjectRegistry and Customizable infrastructure in a simpler manner. With this change, the Customizable tests can now check what factories are registered and attempt to create each of them in a systematic fashion. With this change, I think all of the factories registered with the ObjectRegistry/CreateFromString are now tested via the customizable_test classes. Note that there were a few other minor changes. There was a "posix://*" register with the ObjectRegistry which was missed during the PatternEntry conversion -- these changes found that. The nickname and default names for the FileSystem classes was also inverted. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9358 Reviewed By: pdillinger Differential Revision: D33433542 Pulled By: mrambacher fbshipit-source-id: 9a32da74e6620745b4eeffb2712be70eeeadfa7e |
|
|
sdong
|
736a7b5433 |
Remove own ToString() (#9955)
Summary: ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString(). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955 Test Plan: Watch CI tests Reviewed By: riversand963 Differential Revision: D36176799 fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471 |
|
|
Peter Dillinger
|
efd035164b |
Meta-internal folly integration with F14FastMap (#9546)
Summary: Especially after updating to C++17, I don't see a compelling case for *requiring* any folly components in RocksDB. I was able to purge the existing hard dependencies, and it can be quite difficult to strip out non-trivial components from folly for use in RocksDB. (The prospect of doing that on F14 has changed my mind on the best approach here.) But this change creates an optional integration where we can plug in components from folly at compile time, starting here with F14FastMap to replace std::unordered_map when possible (probably no public APIs for example). I have replaced the biggest CPU users of std::unordered_map with compile-time pluggable UnorderedMap which will use F14FastMap when USE_FOLLY is set. USE_FOLLY is always set in the Meta-internal buck build, and a simulation of that is in the Makefile for public CI testing. A full folly build is not needed, but checking out the full folly repo is much simpler for getting the dependency, and anything else we might want to optionally integrate in the future. Some picky details: * I don't think the distributed mutex stuff is actually used, so it was easy to remove. * I implemented an alternative to `folly::constexpr_log2` (which is much easier in C++17 than C++11) so that I could pull out the hard dependencies on `ConstexprMath.h` * I had to add noexcept move constructors/operators to some types to make F14's complainUnlessNothrowMoveAndDestroy check happy, and I added a macro to make that easier in some common cases. * Updated Meta-internal buck build to use folly F14Map (always) No updates to HISTORY.md nor INSTALL.md as this is not (yet?) considered a production integration for open source users. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9546 Test Plan: CircleCI tests updated so that a couple of them use folly. Most internal unit & stress/crash tests updated to use Meta-internal latest folly. (Note: they should probably use buck but they currently use Makefile.) Example performance improvement: when filter partitions are pinned in cache, they are tracked by PartitionedFilterBlockReader::filter_map_ and we can build a test that exercises that heavily. Build DB with ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters ``` and test with (simultaneous runs with & without folly, ~20 times each to see convergence) ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench_folly -readonly -use_existing_db -benchmarks=readrandom -num=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -partition_index_and_filters -duration=40 -pin_l0_filter_and_index_blocks_in_cache ``` Average ops/s no folly: 26229.2 Average ops/s with folly: 26853.3 (+2.4%) Reviewed By: ajkr Differential Revision: D34181736 Pulled By: pdillinger fbshipit-source-id: ffa6ad5104c2880321d8a1aa7187e00ab0d02e94 |
|
|
ehds@qq.com
|
60422f1676 |
Replace GetUserKey with ExtractUserKey (#9664)
Summary: Replace `GetUserKey` with `ExtractUserKey` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9664 Reviewed By: jay-zhuang Differential Revision: D34673571 Pulled By: ajkr fbshipit-source-id: 5acf7d0d1a45efce0ccbe505991acf76c9cdc461 |
|
|
Andrew Kryczka
|
babe56ddba |
Add rate limiter priority to ReadOptions (#9424)
Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c |
|
|
Peter Dillinger
|
fc9d4071f0 |
Fast path for detecting unchanged prefix_extractor (#9407)
Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76 |
|
|
mrambacher
|
1973fcba11 |
Restore Regex support for ObjectLibrary::Register, rename new APIs to allow old one to be deprecated in the future (#9362)
Summary: In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release. Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362 Reviewed By: pdillinger Differential Revision: D33432562 Pulled By: mrambacher fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02 |
|
|
mrambacher
|
1c39b7952b |
Remove/Reduce use of Regex in ObjectRegistry/Library (#9264)
Summary: Added new ObjectLibrary::Entry classes to replace/reduce the use of Regex. For simple factories that only do name matching, there are "StringEntry" and "AltStringEntry" classes. For classes that use some semblance of regular expressions, there is a PatternEntry class that can match a name and prefixes. There is also a class for Customizable::IndividualId format matches. Added tests for the new derivative classes and got all unit tests to pass. Resolves https://github.com/facebook/rocksdb/issues/9225. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9264 Reviewed By: pdillinger Differential Revision: D33062001 Pulled By: mrambacher fbshipit-source-id: c2d2143bd2d38bdf522705c8280c35381b135c03 |
|
|
Peter Dillinger
|
e92a0ed040 |
Optimize & clean up footer code (#9280)
Summary: Again, ahead of planned changes in https://github.com/facebook/rocksdb/issues/9058. This change improves performance (vs. pre-https://github.com/facebook/rocksdb/issues/9240 baseline) by separating a FooterBuilder from Footer, where FooterBuilder includes (inline owns) the serialized data so that it can be stack allocated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9280 Test Plan: existing tests + performance testing below Extreme case performance testing as in https://github.com/facebook/rocksdb/issues/9240 with TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Pre-https://github.com/facebook/rocksdb/issues/9240 baseline ( |
|
|
Peter Dillinger
|
653c392e47 |
More refactoring ahead of footer & meta changes (#9240)
Summary: I'm working on a new format_version=6 to support context checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test updates to support that change. Test coverage data and manual inspection agree on dead code in block_based_table_reader.cc (removed). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240 Test Plan: tests enhanced to cover more cases etc. Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible. TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true} (Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness) Before w/ wal: 454512 After w/ wal: 444820 (-2.1%) Before w/o wal: 1004560 After w/o wal: 998897 (-0.6%) Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case. This regression will be corrected in a follow-up PR. Reviewed By: ajkr Differential Revision: D32813769 Pulled By: pdillinger fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f |
|
|
Peter Dillinger
|
230660be73 |
Improve / clean up meta block code & integrity (#9163)
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
|
|
|
mrambacher
|
13ae16c315 |
Cleanup includes in dbformat.h (#8930)
Summary: This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead. Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing. Hopefully, this sort of code hygiene cleanup will speed up the builds... Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930 Reviewed By: pdillinger Differential Revision: D31142788 Pulled By: mrambacher fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d |
|
|
Hui Xiao
|
d6bd1a0291 |
Support "level_at_creation" in TablePropertiesCollectorFactory::Context (#8919)
Summary: Context: Exposing the level of the sst file (i.e, table) where it is created in `TablePropertiesCollectorFactory::Context` allows users of `TablePropertiesCollectorFactory` to customize some implementation details of `TablePropertiesCollectorFactory` and `TablePropertiesCollector` based on the level of creation. For example, `TablePropertiesCollector::NeedCompact()` can return different values based on level of creation. - Declared an extra field `level_at_creation` in `TablePropertiesCollectorFactory::Context` - Allowed `level_at_creation` to be passed in as an argument in `IntTblPropCollectorFactory::CreateIntTblPropCollector()` and `UserKeyTablePropertiesCollectorFactory::CreateIntTblPropCollector()`, the latter of which is an internal wrapper of user's passed-in `TablePropertiesCollectorFactory::CreateTablePropertiesCollector()` used in table-building process - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` passed into both `BlockBasedTableBuilder` and `PlainTableBuilder` - `PlainTableBuilder` previously did not capture `level_at_creation` from `TableBuilderOptions` in `PlainTableFactory`. In order for it to call the method with this parameter, this PR also made `PlainTableBuilder` capture `level_at_creation` as a required parameter - Called `IntTblPropCollectorFactory::CreateIntTblPropCollector()` with `level_at_creation` its overridden functions in its derived classes, including `RegularKeysStartWithAFactory::CreateIntTblPropCollector()` in `table_properties_collector_test.cc`, `SstFileWriterPropertiesCollectorFactory::CreateIntTblPropCollector()` in `sst_file_writer_collectors.h` Pull Request resolved: https://github.com/facebook/rocksdb/pull/8919 Test Plan: - Passed the added assertion for `context.level_at_creation` - Passed existing tests - Run `Make` to make sure adding a required parameter to `PlainTableBuilder`'s constructor does not break anything Reviewed By: anand1976 Differential Revision: D30951729 Pulled By: hx235 fbshipit-source-id: c4a0173b0d9344a4cf47e1b987d759c1c73cb474 |
|
|
mrambacher
|
e0f697d2bd |
Make SliceTransform into a Customizable class (#8641)
Summary: Made SliceTransform into a Customizable class. Would be nice to write a test that stored and used a custom transform in an SST table. There are a set of tests (DBBlockFliterTest.PrefixExtractor*, SamePrefixTest.InDomainTest, PrefixTest.PrefixAndWholeKeyTest that run the same with or without a SliceTransform/PrefixFilter. Is this expected? Pull Request resolved: https://github.com/facebook/rocksdb/pull/8641 Reviewed By: zhichao-cao Differential Revision: D31142793 Pulled By: mrambacher fbshipit-source-id: bb08672fccbfdc263dcae21f25a62307e1facda1 |
|
|
mrambacher
|
beed86473a |
Make MemTableRepFactory into a Customizable class (#8419)
Summary: This PR does the following: -> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString -> Makes the existing implementations compatible with configurations -> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419 Reviewed By: zhichao-cao Differential Revision: D29558961 Pulled By: mrambacher fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c |
|
|
Peter Dillinger
|
c9cd5d25a8 |
Remove some unneeded code (#8736)
Summary: * FullKey and ParseFullKey appear to serve no purpose in the public API (or anything else) so removed. Only use in one test updated. * NumberToString serves no purpose vs. ToString so removed, numerous calls updated * Remove unnecessary forward declarations in metadata.h by re-arranging class definitions. * Remove some unneeded semicolons Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736 Test Plan: existing tests Reviewed By: mrambacher Differential Revision: D30700039 Pulled By: pdillinger fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2 |
|
|
Peter Dillinger
|
04db764831 |
Embed original file number in SST table properties (#8686)
Summary: I very recently realized that with https://github.com/facebook/rocksdb/issues/8669 we cannot later add file numbers to external SST files (so that more can share db session ids for better uniqueness properties), because of forward compatibility. We would have a version of RocksDB that assumes session IDs are unique on external SST files and therefore can't really break that invariant in future files. This change adds a table property for "orig_file_number" which is populated by normal SST files and also external SST files generated by SstFileWriter. SstFileWriter now keeps a db_session_id for life of the object and increments its own file numbers for embedding in table properties. (They are arguably "fake" file numbers because these numbers and not embedded in the file name.) While updating block_based_table_builder, I removed several unnecessary fields from Rep, because following the pattern would have created another unnecessary field. This change also updates block_based_table_reader to use this new property when available, which means that for newer SST files, we can determine the stable/original <db_session_id,file_number> unique identifier using just the file contents, not the file name. (It's a bit complicated; detailed comments in block_based_table_reader.) Also added DB host id to properties listing by sst_dump, which could be useful in debugging. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8686 Test Plan: majorly overhauled StableCacheKeys test for this change Reviewed By: zhichao-cao Differential Revision: D30457742 Pulled By: pdillinger fbshipit-source-id: 2e5ae7dddeb94fb9d8eac8a928486aed8b8cd445 |
|
|
Levi Tamasi
|
1ae026c400 |
Partially revert the "apply subrange of table property collectors" change (#8465)
Summary: We ended up using a different approach for tracking the amount of garbage in blob files (see e.g. https://github.com/facebook/rocksdb/pull/8450), so the ability to apply only a range of table property collectors is now unnecessary. The patch reverts this part of https://github.com/facebook/rocksdb/pull/8298 while keeping the cleanup done in that PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8465 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D29399921 Pulled By: ltamasi fbshipit-source-id: af64816c357d0829b9d7ba8ca1477038138f6f0a |
|
|
Levi Tamasi
|
d83542ca83 |
Make it possible to apply only a subrange of table property collectors (#8298)
Summary: This patch does two things: 1) Introduces some aliases in order to eliminate/prevent long-winded type names w/r/t the internal table property collectors (see e.g. `std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`). 2) Makes it possible to apply only a subrange of table property collectors during table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories` from a pointer to a `vector` into a range (i.e. a pair of iterators). Rationale: I plan to introduce a BlobDB related table property collector, which should only be applied during table creation if blob storage is enabled at the moment (which can be changed dynamically). This change will make it possible to include/ exclude the BlobDB related collector as needed without having to introduce a second `vector` of collectors in `ColumnFamilyData` with pretty much the same contents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298 Test Plan: `make check` Reviewed By: jay-zhuang Differential Revision: D28430910 Pulled By: ltamasi fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e |
|
|
mrambacher
|
8948dc8524 |
Make ImmutableOptions struct that inherits from ImmutableCFOptions and ImmutableDBOptions (#8262)
Summary: The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form). Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes. Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262 Reviewed By: pdillinger Differential Revision: D28226540 Pulled By: mrambacher fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf |
|
|
Peter Dillinger
|
85becd94c1 |
Refactor: use TableBuilderOptions to reduce parameter lists (#8240)
Summary: Greatly reduced the not-quite-copy-paste giant parameter lists of rocksdb::NewTableBuilder, rocksdb::BuildTable, BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor. Moved weird separate parameter `uint32_t column_family_id` of TableFactory::NewTableBuilder into TableBuilderOptions. Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t target_file_size` is not randomly placed between uint64_t timestamps (was easy to mix up). Replaced a couple of fields of BlockBasedTableBuilder::Rep with a FilterBuildingContext. The motivation for this change is making it easier to pass along more data into new fields in FilterBuildingContext (follow-up PR). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240 Test Plan: ASAN make check Reviewed By: mrambacher Differential Revision: D28075891 Pulled By: pdillinger fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f |
|
|
mrambacher
|
0ca6d6297f |
Rename variables in ImmutableCFOptions to avoid conflicts with ImmutableDBOptions (#8227)
Summary: Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227 Reviewed By: jay-zhuang Differential Revision: D28000967 Pulled By: mrambacher fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b |
|
|
mrambacher
|
6bab3a34e9 |
Move RegisterOptions into the Configurable API (#8223)
Summary: As previously coded, a Configurable extension would need access to code not in the public API. This change moves RegisterOptions into the Configurable class and therefore available to public extensions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8223 Reviewed By: anand1976 Differential Revision: D27960188 Pulled By: mrambacher fbshipit-source-id: ac88b19397183df633902def5b5701b9b65fbf40 |
|
|
mrambacher
|
c442f6809f |
Create a Customizable class to load classes and configurations (#6590)
Summary: The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID. Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and a method to instantiate them (TableFactory::CreateFromString). Customizable objects can be registered with the ObjectRegistry and created dynamically. Future PRs will make more types of objects extend Customizable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590 Reviewed By: cheng-chang Differential Revision: D24841553 Pulled By: zhichao-cao fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155 |
|
|
Ramkumar Vadivelu
|
9a690a74e1 |
In ParseInternalKey(), include corrupt key info in Status (#7515)
Summary: Fixes Issue https://github.com/facebook/rocksdb/issues/7497 When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()` Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later. Tests: - make check - some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test - some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test Example of new status returns: - Key too small - `Corrupted Key: Internal Key too small. Size=5` - Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3` - Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3` Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515 Reviewed By: ajkr Differential Revision: D24240264 Pulled By: ramvadiv fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7 |
|
|
mrambacher
|
1eda625eab |
Revert `Status`es returned from pre-`Configurable` options functions (#7563)
Summary: Further refinement of the earlier PR. Now the Status is NotFound with a subcode of PathNotFound. Also the existing functions for options parsing/loading are reverted to return InvalidArgument no matter in which way the user-provided arguments are deemed invalid. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7563 Reviewed By: zhichao-cao Differential Revision: D24422491 Pulled By: ajkr fbshipit-source-id: ba6b237cd0584d3f925c5ba0d349aeb8c250af67 |
|
|
anand76
|
00751e4292 |
Add a host location property to TableProperties (#7479)
Summary: This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479 Test Plan: Add new unit tests Reviewed By: pdillinger Differential Revision: D24340671 Pulled By: anand1976 fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2 |
|
|
Zhichao Cao
|
16bff5370d |
Add plain_table_db_test to ASSERT_STATUS_CHECKED list (#7482)
Summary: Add plain_table_db_test to ASSERT_STATUS_CHECKED list Pull Request resolved: https://github.com/facebook/rocksdb/pull/7482 Test Plan: ASSERT_STATUS_CHECKED=1 make -j48 plain_table_db_test Reviewed By: riversand963 Differential Revision: D24034987 Pulled By: zhichao-cao fbshipit-source-id: e61c937d55ded0947cc8936937362dafed572a60 |
|
|
Ramkumar Vadivelu
|
e04a50923d |
Change ParseInternalKey() to return Status instead of bool (#7457)
Summary: Fixes https://github.com/facebook/rocksdb/issues/7430 Change ParseInternalKey() to return Status instead of bool. db_bench (seekrandom) based before/after results with value size of 100 bytes and 16 bytes can be found at (tests ran on an udb server): https://www.dropbox.com/s/47bwamdy5ozngph/PIK_ret_Status_results.xlsx?dl=0  Pull Request resolved: https://github.com/facebook/rocksdb/pull/7457 Reviewed By: ajkr Differential Revision: D24002433 Pulled By: ramvadiv fbshipit-source-id: ac253ecf577a29044c47c3fe254a01e71404c44c |
|
|
sdong
|
d08a9005b7 |
Make db_basic_test pass assert status checked (#7452)
Summary: Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452 Test Plan: See CI tests pass. Reviewed By: zhichao-cao Differential Revision: D23979764 fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe |
|
|
yaphet
|
323a834d1d |
Fix typo (#7353)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7353 Reviewed By: ajkr Differential Revision: D23585525 Pulled By: zhichao-cao fbshipit-source-id: 3f72d9663ec207b9dfe6b287d455a13d3c86879f |
