Summary:
https://github.com/facebook/rocksdb/issues/12466 reported a bug when `RocksDB.getColumnFamilyMetaData()` is called on an existing database(With files stored on disk). As neilramaswamy mentioned, this was caused by https://github.com/facebook/rocksdb/issues/11770 where the signature of `SstFileMetaData` constructor was changed, but JNI code wasn't updated.
This PR fix JNI code, and also properly populate `fileChecksum` on `SstFileMetaData`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12474
Reviewed By: jowlyzhang
Differential Revision: D55811808
Pulled By: ajkr
fbshipit-source-id: 2ab156f41eaf4a4f30c49e6df421b61e8451230e
Summary:
ScopedArenaIterator is not an iterator. It is a pointer wrapper. And we don't need a custom implemented pointer wrapper when std::unique_ptr can be instantiated with what we want.
So this adds ScopedArenaPtr<T> to replace those uses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12470
Test Plan: CI (including ASAN/UBSAN)
Reviewed By: jowlyzhang
Differential Revision: D55254362
Pulled By: pdillinger
fbshipit-source-id: cc96a0b9840df99aa807f417725e120802c0ae18
Summary:
On file systems that support storage level data checksum and reconstruction, retry SST block reads for point lookups, scans, and flush and compaction if there's a checksum mismatch on the initial read. A file system can indicate its support by setting the `FSSupportedOps::kVerifyAndReconstructRead` bit in `SupportedOps`.
Tests:
Add new unit tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12427
Reviewed By: ajkr
Differential Revision: D55025941
Pulled By: anand1976
fbshipit-source-id: dbd990cb75e03f756c8a66d42956f645c0b6d55e
Summary:
This PR adds support to return data's approximate unix write time in the iterator property API. The general implementation is:
1) If the entry comes from a SST file, the sequence number to time mapping recorded in that file's table properties will be used to deduce the entry's write time from its sequence number. If no such recording is available, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown except if the entry's sequence number is zero, in which case, 0 is returned. This also means that even if `preclude_last_level_data_seconds` and `preserve_internal_time_seconds` can be toggled off between DB reopens, as long as the SST file's table property has the mapping available, the entry's write time can be deduced and returned.
2) If the entry comes from memtable, we will use the DB's sequence number to write time mapping to do similar things. A copy of the DB's seqno to write time mapping is kept in SuperVersion to allow iterators to have lock free access. This also means a new `SuperVersion` is installed each time DB's seqno to time mapping updates, which is originally proposed by Peter in https://github.com/facebook/rocksdb/issues/11928 . Similarly, if the feature is not enabled, `std::numeric_limits<uint64_t>::max()` is returned to indicate the write time is unknown.
Needed follow up:
1) The write time for `kTypeValuePreferredSeqno` should be special cased, where it's already specified by the user, so we can directly return it.
2) Flush job can be updated to use DB's seqno to time mapping copy in the SuperVersion.
3) Handle the case when `TimedPut` is called with a write time that is `std::numeric_limits<uint64_t>::max()`. We can make it a regular `Put`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12428
Test Plan: Added unit test
Reviewed By: pdillinger
Differential Revision: D54967067
Pulled By: jowlyzhang
fbshipit-source-id: c795b1b7ec142e09e53f2ed3461cf719833cb37a
Summary:
The most general `open()` method for each of RocksDB, TtlDB, OptimisticTransactionDB and TransactionDB should
- ensure the default CF is supplied in the list of descriptors
- cache the default CF handle
- store open CF handles for automatic close on DB close
The `close()` method in each of these DB subclasses should `close()` all the owned CF handles.
I can’t find a cleaner way to build some generalised open/close that does this for all DB subclasses, so it exists as cut and paste with variations in the 4 different DB subclasses.
Added some slightly paranoid testing that CF handles explicitly referred to as default in a list of CF handles in the general open methods, and the simple open that doesn’t supply a CF, end up reading and writing to the same CF. Prompted by the fact that this code is a bit opaque; the first returned handle is the DB.
As part of this, fix the bug where the Java side of `OptimisticsTransactionDB` was not setting up default column family; this was visible when setting up an iterator; add a test to validate that the iterator is OK. A single Java reference to the default column family was not being created in the OptimisticsTransactionDB RocksDB subclass; it should be created in all subclasses. The same problem had previously been fixed for TtlDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12417
Reviewed By: ajkr
Differential Revision: D54807643
Pulled By: pdillinger
fbshipit-source-id: 66f34e56a822a009a8f2018d401cf8940d91aa35
Summary:
Fix some issues introduced in https://github.com/facebook/rocksdb/pull/12199 (CC rhubner)
1. Previous `jar -v -c -f` was not valid command syntax.
2. Javadoc and source Jar files were prefixed `rocksdb-`, now corrected to `rocksdbjni-`
pdillinger This needs to be merged to `main` and also `8.11.fb` (to fix the Windows build for the RocksJava release of 8.11.2) please.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12371
Reviewed By: pdillinger, jowlyzhang
Differential Revision: D54136834
Pulled By: hx235
fbshipit-source-id: f356f2401042af359ada607e5f0be627418ccd6c
Summary:
This option is used for encoding keys in block based table files. It has been having a default true value since its introduction.
Users may not notice this option is not persisted in options file unless they are explicitly setting it to false. If the users expect `Iterator::GetProperty("rocksdb.iterator.is-key-pinned")` to return 1 when setting `ReadOptions.pin_data = true`, they should have noticed loading options file won't work and have work around for this by always explicitly set this option to false for opening DB. This change won't impact those users except that now they can remove their work around. If the users are not relying on key pinning behavior at all and as a result didn't notice the option is not persisted, this change shouldn't have any visible behavior impact either.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11987
Reviewed By: hx235
Differential Revision: D54093238
Pulled By: jowlyzhang
fbshipit-source-id: 256a3348c44cf91349034d1f6e242c437b32b9a5
Summary:
In RocksDb jni threre is no method to know if the instance is closed or not.
so when using a closed instance it makes jvm crash.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11337
Reviewed By: jaykorean
Differential Revision: D53941387
Pulled By: ajkr
fbshipit-source-id: e3e4e6fe48409fa70a312810e467ec0c4ce356ef
Summary:
A lot of variants of Get and MultiGet have been added to `include/rocksdb/db.h` over the years. Try to consolidate them by marking variants that don't return timestamps as deprecated. The underlying DB implementation will check and return Status::NotSupported() if it doesn't support returning timestamps and the caller asks for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12327
Reviewed By: pdillinger
Differential Revision: D53828151
Pulled By: anand1976
fbshipit-source-id: e0b5ca42d32daa2739d5f439a729815a2d4ff050
Summary:
The RocksDB ticker and histogram statistics were out of sync between the C++ and Java code, with a number of newer stats missing in TickerType.java and HistogramType.java. Also, there were gaps in numbering in portal.h, which could soon become an issue due to the number of tickers and the fact that we're limited to 1 byte in Java. This PR adds the missing stats, and re-numbers all of them. It also moves some stats around to try to group related stats together. Since this will go into a major release, compatibility shouldn't be an issue.
This should be automated at some point, since the current process is somewhat error prone.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12355
Reviewed By: jaykorean
Differential Revision: D53825324
Pulled By: anand1976
fbshipit-source-id: 298c180872f4b9f1ee54b8bb22f4e280458e7e09
Summary:
It's in production for a large storage service, and it was initially released 6 months ago (8.6.0). IMHO that's enough room for "easy downgrade" to most any user's previously integrated version, even if they only update a few times a year.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12352
Test Plan:
tests updated, including format capatibility test
table_test: ApproximateOffsetOfCompressed is affected because adding index block to metaindex adds about 13 bytes
to SST files in format_version 6. This test has historically been problematic and one reason is that, apparently, not only
could it pass/fail depending on snappy compression version, but also how long your host name is, because of db_host_id.
I've cleared that out for the test, which takes care of format_version=6 and hopefully improves long-term reliability.
Suggested follow-up: FinishImpl in table_test.cc takes a table_options that is ignored in some cases and might not match
the ioptions.table_factory configuration unless the caller is very careful. This should be cleaned up somehow.
Reviewed By: anand1976
Differential Revision: D53786884
Pulled By: pdillinger
fbshipit-source-id: 1964cbd40d3ab0a821fdc01c458031df716fcf51
Summary:
There is no strong reason for user to need this mode while on the other hand, its behavior is destructive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12337
Reviewed By: hx235
Differential Revision: D53630393
Pulled By: jowlyzhang
fbshipit-source-id: ce94b537258102cd98f89aa4090025663664dd78
Summary:
When using the Rocksdb Java API.
When we use Java code to call `db.compactRange (columnFamilyHandle, start, null)` which means we hope to perform range compaction on keys bigger than **start**.
we expected call to the corresponding C++ code : `db->compactRange (columnFamilyHandle, &start, nullptr)`
But in reality, what is being called is
`db ->compactRange (columnFamilyHandle,start,"")`
The problem here is the `null` in Java are not converted to `nullptr`, but rather to `""`, which may result in some unexpected results
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12328
Reviewed By: jowlyzhang
Differential Revision: D53432749
Pulled By: cbi42
fbshipit-source-id: eeadd19d05667230568668946d2ef1d5b2568268
Summary:
When is RocksDB is opened with Column Family descriptors, the default column family must be set properly. If it was not, then the flush operation will fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12167
Reviewed By: ajkr
Differential Revision: D53104007
Pulled By: cbi42
fbshipit-source-id: dffa8e34a4b2a438553ee4ea308f3fa2e22e46f7
Summary:
## Overview
In this PR, we introduce support for setting the RocksDB native logger through Java. As mentioned in the discussion on the [Google Group discussion](https://groups.google.com/g/rocksdb/c/xYmbEs4sqRM/m/e73E4whJAQAJ), this work is primarily motivated by the JDK 17 [performance regression in JNI thread attach/detach calls](https://bugs.openjdk.org/browse/JDK-8314859): the only existing RocksJava logging configuration call, `setLogger`, invokes the provided logger over the JNI.
## Changes
Specifically, these changes add support for the `devnull` and `stderr` native loggers. For the `stderr` logger, we add the ability to prefix every log with a `logPrefix`, so that it becomes possible know which database a particular log is coming from (if multiple databases are in use). The API looks like the following:
```java
Options opts = new Options();
NativeLogger stderrNativeLogger = NativeLogger.newStderrLogger(
InfoLogLevel.DEBUG_LEVEL, "[my prefix here]");
options.setLogger(stderrNativeLogger);
try (final RocksDB db = RocksDB.open(options, ...)) {...}
// Cleanup
stderrNativeLogger.close()
opts.close();
```
Note that the API to set the logger is the same, via `Options::setLogger` (or `DBOptions::setLogger`). However, it will set the RocksDB logger to be native when the provided logger is an instance of `NativeLogger`.
## Testing
Two tests have been added in `NativeLoggerTest.java`. The first test creates both the `devnull` and `stderr` loggers, and sets them on the associated `Options`. However, to avoid polluting the testing output with logs from `stderr`, only the `devnull` logger is actually used in the test. The second test does the same logic, but for `DBOptions`.
It is possible to manually verify the `stderr` logger by modifying the tests slightly, and observing that the console indeed gets cluttered with logs from `stderr`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12213
Reviewed By: cbi42
Differential Revision: D52772306
Pulled By: ajkr
fbshipit-source-id: 4026895f78f9cc250daf6bfa57427957e2d8b053
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
Summary:
**Description**
This PR passes along the native `LiveFileMetaData#file_checksum` field from the C++ class to the Java API as a copied byte array. If there is no file checksum generator factory set beforehand, then the array will empty. Please advise if you'd rather it be null - an empty array means one extra allocation, but it avoids possible null pointer exceptions.
> **Note**
> This functionality complements but does not supersede https://github.com/facebook/rocksdb/issues/11736
It's outside the scope here to add support for Java based `FileChecksumGenFactory` implementations. As a workaround, users can already use the built-in one by creating their initial `DBOptions` via properties:
```java
final Properties props = new Properties();
props.put("file_checksum_gen_factory", "FileChecksumGenCrc32cFactory");
try (final DBOptions dbOptions = DBOptions.getDBOptionsFromProps(props);
final ColumnFamilyOptions cfOptions = new ColumnFamilyOptions();
final Options options = new Options(dbOptions, cfOptions).setCreateIfMissing(true)) {
// do stuff
}
```
I wanted to add a better test, but unfortunately there's no available CRC32C implementation available in Java 8 without adding a dependency or adding a JNI helper for RocksDB's own implementation (or bumping the minimum version for tests to Java 9). That said, I understand the test is rather poor, so happy to change it to whatever you'd like.
**Context**
To give some context, we replicate RocksDB checkpoints to other nodes. Part of this is verifying the integrity of each file during replication. With a large enough RocksDB, computing the checksum ourselves is prohibitively expensive. Since SST files comprise the bulk of the data, we'd much rather delegate this to RocksDB on file write, and read it back after to compare.
It's likely we will provide a follow up to read the file checksum list directly from the manifest without having to open the DB, but this was the easiest first step to get it working for us.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11770
Reviewed By: hx235
Differential Revision: D52420729
Pulled By: ajkr
fbshipit-source-id: a873de35a48aaf315e125733091cd221a97b9073
Summary:
### Implement new Java API get()/put()/merge() methods, and transactional variants.
The Java API methods are very inconsistent in terms of how they pass parameters (byte[], ByteBuffer), and what variants and defaulted parameters they support. We try to bring some consistency to this.
* All APIs should support calls with ByteBuffer parameters.
* Similar methods (RocksDB.get() vs Transaction.get()) should support as similar as possible sets of parameters for predictability.
* get()-like methods should provide variants where the caller supplies the target buffer, for the sake of efficiency. Allocation costs in Java can be significant when large buffers are repeatedly allocated and freed.
### API Additions
1. RockDB.get implement indirect ByteBuffers. Added indirect ByteBuffers and supporting native methods for get().
2. RocksDB.Iterator implement missing (byte[], offset, length) variants for key() and value() parameters.
3. Transaction.get() implement missing methods, based on RocksDB.get. Added ByteBuffer.get with and without column family. Added byte[]-as-target get.
4. Transaction.iterator() implement a getIterator() which defaults ReadOptions; as per RocksDB.iterator(). Rationalize support API for this and RocksDB.iterator()
5. RocksDB.merge implement ByteBuffer methods; both direct and indirect buffers. Shadow the methods of RocksDB.put; RocksDB.put only offers ByteBuffer API with explicit WriteOptions. Duplicated this with RocksDB.merge
6. Transaction.merge implement methods as per RocksDB.merge methods. Transaction is already constructed with WriteOptions, so no explicit WriteOptions methods required.
7. Transaction.mergeUntracked implement the same API methods as Transaction.merge except the ones that use assumeTracked, because that’s not a feature of merge untracked.
### Support Changes (C++)
The current JNI code in C++ supports multiple variants of methods through a number of helper functions. There are numerous TODO suggestions in the code proposing that the helpers be re-factored/shared.
We have taken a different approach for the new methods; we have created wrapper classes `JDirectBufferSlice`, `JDirectBufferPinnableSlice`, `JByteArraySlice` and `JByteArrayPinnableSlice` RAII classes which construct slices from JNI parameters and can then be passed directly to RocksDB methods. For instance, the `Java_org_rocksdb_Transaction_getDirect` method is implemented like this:
```
try {
ROCKSDB_NAMESPACE::JDirectBufferSlice key(env, jkey_bb, jkey_off,
jkey_part_len);
ROCKSDB_NAMESPACE::JDirectBufferPinnableSlice value(env, jval_bb, jval_off,
jval_part_len);
ROCKSDB_NAMESPACE::KVException::ThrowOnError(
env, txn->Get(*read_options, column_family_handle, key.slice(),
&value.pinnable_slice()));
return value.Fetch();
} catch (const ROCKSDB_NAMESPACE::KVException& e) {
return e.Code();
}
```
Notice the try/catch mechanism with the `KVException` class, which combined with RAII and the wrapper classes means that there is no ad-hoc cleanup necessary in the JNI methods.
We propose to extend this mechanism to existing JNI methods as further work.
### Support Changes (Java)
Where there are multiple parameter-variant versions of the same method, we use fewer or just one supporting native method for all of them. This makes maintenance a bit easier and reduces the opportunity for coding errors mixing up (untyped) object handles.
In order to support this efficiently, some classes need to have default values for column families and read options added and cached so that they are not re-constructed on every method call.
This PR closes https://github.com/facebook/rocksdb/issues/9776
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11019
Reviewed By: ajkr
Differential Revision: D52039446
Pulled By: jowlyzhang
fbshipit-source-id: 45d0140a4887e42134d2e56520e9b8efbd349660
Summary:
Fixes https://github.com/facebook/rocksdb/issues/11000.
That issue pointed out that RocksDB was slow to delete archived WALs in case time-based and size-based expiration were enabled, and the time-based threshold (`WAL_ttl_seconds`) was small. This PR prevents the delay by taking into account `WAL_ttl_seconds` when deciding the frequency to process archived WALs for deletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12069
Reviewed By: pdillinger
Differential Revision: D51262589
Pulled By: ajkr
fbshipit-source-id: e65431a06ee96f4c599ba84a27d1aedebecbb003
Summary:
- Add missing null check for ColumnFamilyHandle in `GetEntity()`
- `FailIfCfHasTs()` now returns `Status::InvalidArgument()` if `column_family` is null. `MultiGetEntity()` can rely on this for cfh null check.
- Added `DeleteRange` API using Default Column Family to be consistent with other major APIs (This was also causing Java Test failure after the `FailIfCfHasTs()` change)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12057
Test Plan:
- Updated `DBWideBasicTest::GetEntityAsPinnableAttributeGroups` to include null CF case
- Updated `DBWideBasicTest::MultiCFMultiGetEntityAsPinnableAttributeGroups` to include null CF case
Reviewed By: jowlyzhang
Differential Revision: D51167445
Pulled By: jaykorean
fbshipit-source-id: 1c1e44fd7b7df4d2dc3bb2d7d251da85bad7d664
Summary:
Disabling file deletion can be critical for operations like making a backup, recovery from manifest IO error (for now). Ideally as long as there is one caller requesting file deletion disabled, it should be kept disabled until all callers agree to re-enable it. So this PR removes the default forcing behavior for the `EnableFileDeletion` API, and users need to explicitly pass the argument if they insisted on doing so knowing the consequence of what can be potentially disrupted.
This PR removes the API's default argument value so it will cause breakage for all users that are relying on the default value, regardless of whether the forcing behavior is critical for them. When fixing this breakage, it's good to check if the forcing behavior is indeed needed and potential disruption is OK.
This PR also makes unit test that do not need force behavior to do a regular enable file deletion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/12001
Reviewed By: ajkr
Differential Revision: D51214683
Pulled By: jowlyzhang
fbshipit-source-id: ca7b1ebf15c09eed00f954da2f75c00d2c6a97e4
Summary:
- Add the following missing options to src/main/java/org/rocksdb/ImportColumnFamilyOptions.java and in java/rocksjni/import_column_family_options.cc in RocksJava.
- Add the struct to src/main/java/org/rocksdb/ExportImportFilesMetaData.java and in java/rocksjni/export_import_files_metadatajni.cc in RocksJava.
- Add New Java API `createColumnFamilyWithImport` to src/main/java/org/rocksdb/RocksDB.java
- Add New Java API `exportColumnFamily` to src/main/java/org/rocksdb/Checkpoint.java
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11646
Test Plan:
- added unit tests for exportColumnFamily in org.rocksdb.CheckpointTest
- added unit tests for createColumnFamilyWithImport to org.rocksdb.ImportColumnFamilyTest
Reviewed By: ajkr
Differential Revision: D50889700
Pulled By: cbi42
fbshipit-source-id: d623b35e445bba62a0d3c007d74352e937678f6c
