Summary:
Right now, deleting blob files is not rate limited, even if SstFileManger is specified.
On the other hand, rate limiting blob deletion is not supported. With this change, Blob file
deletion will go through SstFileManager too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4904
Differential Revision: D13772545
Pulled By: siying
fbshipit-source-id: bd1b1d0beb26d5167385e00b7ecb8b94b879de84
Summary:
By convention, time_t almost always stores the integral number of seconds since
00:00 hours, Jan 1, 1970 UTC, according to http://www.cplusplus.com/reference/ctime/time_t/.
We surely want more precision than seconds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4868
Differential Revision: D13633046
Pulled By: riversand963
fbshipit-source-id: 4e01e23a22e8838023c51a91247a286dbf3a5396
Summary:
LDB is frequently used to exam data copied. wal_dir in option file is not modified and it usually points to the path it copied from.
The user experience will be better if when ldb sees wal_dir pointed by the option file doesn't exist, rather than fail, just ignore it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4875
Differential Revision: D13643173
Pulled By: siying
fbshipit-source-id: 2e64d4ea2ec49a6794b9a706b7fc1ba901128bb8
Summary:
Remove some components that we never heard people using them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4101
Differential Revision: D8825431
Pulled By: siying
fbshipit-source-id: 97a12ad3cad4ab12c82741a5ba49669aaa854180
Summary:
Previously for point lookup we decided which file to look into based on user key overlap only. We also did not truncate range tombstones in the point lookup code path. These two ideas did not interact well in cases like this:
- L1 has range tombstone [a, c)#1 and point key b#2. The data is split between file1 with range [a#1,1, b#72057594037927935,15], and file2 with range [b#2, c#1].
- L1's file2 gets compacted to L2.
- User issues `Get()` for b#3.
- L1's file1 is opened and the range tombstone [a, c)#1 is found for b, while no point-key for b is found in L1.
- `Get()` assumes that the range tombstone must cover all data in that range in lower levels, so short circuits and returns `NotFound`.
The solution to this problem is to not look into files that only overlap with the point lookup at a range tombstone sentinel endpoint. In the above example, this would mean not opening L1's file1 or its tombstones during the `Get()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4829
Differential Revision: D13561355
Pulled By: ajkr
fbshipit-source-id: a13c21c816870a2f5d32a48af6dbd719a7d9d19f
Summary:
The original implementation has two problems:
1. f0dda35d7d/db/db_impl_write.cc (L478)f0dda35d7d/db/write_thread.h (L231)
If the callback status of leader of the write_group fails, then the whole write_group will not write to WAL, this may cause data loss.
2. f0dda35d7d/db/write_thread.h (L130)
The annotation says that Writer.status is the status of memtable inserter, but the original implementation use it for another case which is not consistent with the original design. Looks like we can still reuse Writer.status, but we should modify the annotation, so Writer.status is not only the status of memtable inserter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4838
Differential Revision: D13574070
Pulled By: yiwu-arbug
fbshipit-source-id: a2a2aefcfd329c4c6a91652bf090aaf1ce119c4b
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.
Tests:
1. Unit tests
2. make check
3. db_bench -
TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom : 0.167 micros/op 5983920 ops/sec; 426.2 MB/s (1000000 of 1000000 found)
Multireadrandom with batch size 1:
multireadrandom : 0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754
Differential Revision: D13363550
Pulled By: anand1976
fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4
Summary:
Choose to preload some files if options.max_open_files != -1. This can slightly narrow the gap of performance between options.max_open_files is -1 and a large number. To avoid a significant regression to DB reopen speed if options.max_open_files != -1. Limit the files to preload in DB open time to 16.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3340
Differential Revision: D6686945
Pulled By: siying
fbshipit-source-id: 8ec11bbdb46e3d0cdee7b6ad5897a09c5a07869f
Summary:
Previously we were cleaning up range tombstone meta-block by calling `ReleaseCachedEntry`, which wouldn't work if `value != nullptr && cache_handle == nullptr`. This happened at least in the case with mmap reads and block cache both enabled. I noticed `NewDataBlockIterator` intends to handle all these cases, so migrated to that instead of `NewUnfragmentedRangeTombstoneIterator`.
Also changed the table-opening logic to fail on `ReadRangeDelBlock` failure, since that can cause data corruption. Added a test case to verify this behavior. Note the test case does not fail on `TryReopen` because failure to preload table handlers is not considered critical. However, it does fail on any read involving that file since it cannot return correct data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4810
Differential Revision: D13534296
Pulled By: ajkr
fbshipit-source-id: 55dde1111717cea6ec4bf38418daab81ccef3599
Summary:
If one column family is dropped, we should simply skip it and continue to flush
other active ones.
Currently we use Status::ShutdownInProgress to notify caller of column families
being dropped. In the future, we should consider using a different Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4708
Differential Revision: D13378954
Pulled By: riversand963
fbshipit-source-id: 42f248cdf2d32d4c0f677cd39012694b8f1328ca
Summary:
1. DBImplReadOnly::GetLiveFiles should not return NotSupported. Instead, it
should call DBImpl::GetLiveFiles(flush_memtable=false).
2. In DBImp::Recover, we should also recover the OPTIONS file name and/or
number so that an immediate subsequent GetLiveFiles will get the correct
OPTIONS name.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4681
Differential Revision: D13069205
Pulled By: riversand963
fbshipit-source-id: 3e6a0174307d06db5a01feb099b306cea1f7f88a
Summary:
Transaction::GetForUpdate is extended with a do_validate parameter with default value of true. If false it skips validating the snapshot (if there is any) before doing the read. After the read it also returns the latest value (expects the ReadOptions::snapshot to be nullptr). This allows RocksDB applications to use GetForUpdate similarly to how InnoDB does. Similarly ::Merge, ::Put, ::Delete, and ::SingleDelete are extended with assume_exclusive_tracked with default value of false. It true it indicates that call is assumed to be after a ::GetForUpdate(do_validate=false).
The Java APIs are accordingly updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4680
Differential Revision: D13068508
Pulled By: maysamyabandeh
fbshipit-source-id: f0b59db28f7f6a078b60844d902057140765e67d
Summary:
As titled. Update history to include a recent bug fix in
9be3e6b488.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4753
Differential Revision: D13350286
Pulled By: riversand963
fbshipit-source-id: b6324780dee4cb1757bc2209403a08531c150c08
Summary:
Full block (use_block_based_builder=false) Bloom filter has clear CPU saving benefits but with limitation of using temp memory when building an SST file proportional to the SST file size. We reduced the chance of having large SST files with multi-level universal compaction. Now we change to a default with better performance.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4735
Differential Revision: D13266674
Pulled By: siying
fbshipit-source-id: 7594a4c3e32568a5a2adce22bb0e46553e55c602
Summary:
Fix block based table reader not using memory_allocator when allocating index blocks and compression dictionary blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4678
Differential Revision: D13054594
Pulled By: yiwu-arbug
fbshipit-source-id: 379f25bcc665395662511c4f873f4b7b55104ce2
Summary:
DeleteRange is now ready for production use. Change the header comment to reflect this, and update HISTORY.md with the feature's status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4709
Differential Revision: D13209055
Pulled By: abhimadan
fbshipit-source-id: 65423eb1a4927cf593c38254cd87c322f73ae137
Summary:
We haven't been populating `NO_FILE_CLOSES` since v1.5.8 even though it was never marked as deprecated. Start populating it again. Conveniently `DeleteTableReader` has an unused `void*` argument that we can use...
Blame: 63f216ee0aCloses#4700.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4703
Differential Revision: D13146769
Pulled By: ajkr
fbshipit-source-id: ad8d6fb0493e701f60a165a3bca1787d255be008
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
Since a range tombstone seen at one level will cover all keys
in the range at lower levels, there was a short-circuiting check in Get
that reported a key was not found at most one file after the range
tombstone was discovered. However, this was incorrect for merge
operands, since a deletion might only cover some merge operands,
which implies that the key should be found. This PR fixes this logic in
the Version portion of Get, and removes the logic from the MemTable
portion of Get, since the perforamnce benefit provided there is minimal.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4698
Differential Revision: D13142484
Pulled By: abhimadan
fbshipit-source-id: cbd74537c806032f2bfa564724d01a80df7c8f10
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
Currently, `Statistics` can record tick by `recordTick()` whose second parameter is an `uint64_t`.
That means tick can only increase.
If we want to reduce tick, we have to work around like `RecordTick(statistics_, NO_ITERATORS, uint64_t(-1));`.
That's kind of a hack.
So, this PR divide `NO_ITERATORS` into two counters `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETE`, making the counters increase only.
Fixes#3013 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4498
Differential Revision: D10395010
Pulled By: sagar0
fbshipit-source-id: cfb523b22a37411c794b4e9da090f1ae30293db2
Summary:
Use the `DBOptions` that the backup engine already holds to figure out the right `EnvOptions` to use when reading the DB files. This means that, if a user opened a DB instance with `use_direct_reads=true`, then using `BackupEngine` to back up that DB instance will use direct I/O to read files when calculating checksums and copying. Currently the WALs and manifests would still be read using buffered I/O to prevent mixing direct I/O reads with concurrent buffered I/O writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4640
Differential Revision: D13015268
Pulled By: ajkr
fbshipit-source-id: 77006ad6f3e00ce58374ca4793b785eea0db6269
Summary:
this PR adds two more per-level perf context counters to track
* number of keys returned in Get call, break down by levels
* total processing time at each level during Get call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4617
Differential Revision: D12898024
Pulled By: miasantreble
fbshipit-source-id: 6b84ef1c8097c0d9e97bee1a774958f56ab4a6c4
Summary:
Move the line `Add xxhash64 checksum support` to `Unreleased` section because it has not been released to 5.17.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4627
Differential Revision: D12944123
Pulled By: riversand963
fbshipit-source-id: 2762857065b9e741c64ff8b6116ca62fe31891d8
Summary:
When evicting an entry form the commit_cache, it is verified against the list of old snapshots to see if it overlaps with any. The list of old snapshots is split into two lists: an efficient concurrent cache and an slow vector protected by a lock. The patch fixes a bug that would stop the search in the cache if it finds any and yet would not include the larger snapshots in the slower list.
An extra info log entry is also removed. The condition to trigger that although very rare is still feasible and should not spam the LOG when that happens.
Fixes#4621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4639
Differential Revision: D12934989
Pulled By: maysamyabandeh
fbshipit-source-id: 4e0fe8147ba292b554ae78e94c21c2ef31e03e2d
Summary:
This property can help debug why SST files aren't being deleted. Previously we only had the property "rocksdb.is-file-deletions-enabled". However, even when that returned true, obsolete SSTs may still not be deleted due to the coarse-grained mechanism we use to prevent newly created SSTs from being accidentally deleted. That coarse-grained mechanism uses a lower bound file number for SSTs that should not be deleted, and this property exposes that lower bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4618
Differential Revision: D12898179
Pulled By: ajkr
fbshipit-source-id: fe68acc041ddbcc9276bbd48976524d95aafc776
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
There was a bug that the user comparator would receive the internal key instead of the user key. The bug was due to RangeMightExistAfterSortedRun expecting user key but receiving internal key when called in GenerateBottommostFiles. The patch augment an existing unit test to reproduce the bug and fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4575
Differential Revision: D10500434
Pulled By: maysamyabandeh
fbshipit-source-id: 858346d2fd102cce9e20516d77338c112bdfe366
Summary:
Level compaction usually performs poorly when the writes so heavy that the level targets can't be guaranteed. With this improvement, we improve level_compaction_dynamic_level_bytes = true so that in the write heavy cases, the level multiplier can be slightly adjusted based on the size of L0.
We keep the behavior the same if number of L0 files is under 2X compaction trigger and the total size is less than options.max_bytes_for_level_base, so that unless write is so heavy that compaction cannot keep up, the behavior doesn't change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4338
Differential Revision: D9636782
Pulled By: siying
fbshipit-source-id: e27fc17a7c29c84b00064cc17536a01dacef7595
Summary:
WriteBatchWithIndex's SeekForPrev() has a bug that we internally place the position just before the seek key rather than after. This makes the iterator to miss the result that is the same as the seek key. Fix it by position the iterator equal or smaller.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4559
Differential Revision: D10468534
Pulled By: siying
fbshipit-source-id: 2fb371ae809c561b60a1c11cef71e1c66fea1f19
Summary:
Current implementation of perf context is level agnostic. Making it hard to do performance evaluation for the LSM tree. This PR adds `PerfContextByLevel` to decompose the counters by level.
This will be helpful when analyzing point and range query performance as well as tuning bloom filter
Also replaced __thread with thread_local keyword for perf_context
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4226
Differential Revision: D10369509
Pulled By: miasantreble
fbshipit-source-id: f1ced4e0de5fcebdb7f9cff36164516bc6382d82
Summary:
When a CompactRange() call for a level is truncated before the end key
is reached, because it exceeds max_compaction_bytes, we need to properly
set the compaction_end parameter to indicate the stop key. The next
CompactRange will use that as the begin key. We set it to the smallest
key of the next file in the level after expanding inputs to get a clean
cut.
Previously, we were setting it before expanding inputs. So we could end
up recompacting some files. In a pathological case, where a single key
has many entries spanning all the files in the level (possibly due to
merge operands without a partial merge operator, thus resulting in
compaction output identical to the input), this would result in
an endless loop over the same set of files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4496
Differential Revision: D10395026
Pulled By: anand1976
fbshipit-source-id: f0c2f89fee29b4b3be53b6467b53abba8e9146a9
Summary:
`CompactionIterator::snapshots_` is ordered by ascending seqnum, just like `DBImpl`'s linked list of snapshots from which it was copied. This PR exploits this ordering to make `findEarliestVisibleSnapshot` do binary search rather than linear scan. This can make flush/compaction significantly faster when many snapshots exist since that function is called on every single key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4495
Differential Revision: D10386470
Pulled By: ajkr
fbshipit-source-id: 29734991631227b6b7b677e156ac567690118a8b
Summary:
There is a bug when the write queue leader is blocked on a write
delay/stop, and the queue has writers with WriteOptions::no_slowdown set
to true. They are not woken up until the write stall is cleared.
The fix introduces a dummy writer inserted at the tail to indicate a
write stall and prevent further inserts into the queue, and a condition
variable that writers who can tolerate slowdown wait on before adding
themselves to the queue. The leader calls WriteThread::BeginWriteStall()
to add the dummy writer and then walk the queue to fail any writers with
no_slowdown set. Once the stall clears, the leader calls
WriteThread::EndWriteStall() to remove the dummy writer and signal the
condition variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4475
Differential Revision: D10285827
Pulled By: anand1976
fbshipit-source-id: 747465e5e7f07a829b1fb0bc1afcd7b93f4ab1a9
Summary:
The controller you requested could not be found. PTAL
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4466
Differential Revision: D10241358
Pulled By: yiwu-arbug
fbshipit-source-id: 99664eb286860a6c8844d50efeb0ef6f0e10dd1e
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Previously `CompactFiles` with `CompressionType::kDisableCompressionOption` caused program to crash on assertion failure. This PR fixes the crash by adding support for that setting. Now, that setting will cause RocksDB to choose compression according to the column family's options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4438
Differential Revision: D10115761
Pulled By: ajkr
fbshipit-source-id: a553c6fa76fa5b6f73b0d165d95640da6f454122
Summary:
The default for index_block_restart_interval is 1 but some use 16 in production. The patch extends crash test to test both values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4383
Differential Revision: D9887304
Pulled By: maysamyabandeh
fbshipit-source-id: a8d00fea974a79ad563f9f4d9d7b069e9f746a8f
Summary:
TransactionOptions::skip_concurrency_control allows pessimistic transactions to skip the overhead of concurrency control. This could be as an optimization if the application knows that the transaction would not have any conflict with concurrent transactions. It is currently used during recovery assuming (i) application guarantees no conflict between prepared transactions in the WAL (ii) application guarantees that recovered transactions will be rolled back/commit before new transactions start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4346
Differential Revision: D9759149
Pulled By: maysamyabandeh
fbshipit-source-id: f896e84fa58b0b584be904c7fd3883a41ea3215b
Summary:
Basically at the moment it seems it's possible to cause write stall by calling flush (either manually vis DB::Flush(), or from Backup Engine directly calling FlushMemTable() while background flush may be already happening.
One of the ways to fix it is that in DBImpl::CompactRange() we already check for possible stall and delay flush if needed before we actually proceed to call FlushMemTable(). We can simply move this delay logic to separate method and call it from FlushMemTable.
This is draft patch, for first look; need to check tests/update SyncPoints and most certainly would need to add allow_write_stall method to FlushOptions().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4297
Differential Revision: D9420705
Pulled By: mikhail-antonov
fbshipit-source-id: f81d206b55e1d7b39e4dc64242fdfbceeea03fcc
Summary: For the CURRENT file forged during checkpoint, we were forgetting to `fsync` or `fdatasync` it after its creation. This PR fixes it.
Differential Revision: D9525939
Pulled By: ajkr
fbshipit-source-id: a505483644026ee3f501cfc0dcbe74832165b2e3
