mirror of https://github.com/facebook/rocksdb.git
19 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Hui Xiao
|
8f763bdeab |
Record and use the tail size to prefetch table tail (#11406)
Summary: **Context:** We prefetch the tail part of a SST file (i.e, the blocks after data blocks till the end of the file) during each SST file open in hope to prefetch all the stuff at once ahead of time for later read e.g, footer, meta index, filter/index etc. The existing approach to estimate the tail size to prefetch is through `TailPrefetchStats` heuristics introduced in https://github.com/facebook/rocksdb/pull/4156, which has caused small reads in unlucky case (e.g, small read into the tail buffer during table open in thread 1 under the same BlockBasedTableFactory object can make thread 2's tail prefetching use a small size that it shouldn't) and is hard to debug. Therefore we decide to record the exact tail size and use it directly to prefetch tail of the SST instead of relying heuristics. **Summary:** - Obtain and record in manifest the tail size in `BlockBasedTableBuilder::Finish()` - For backward compatibility, we fall back to TailPrefetchStats and last to simple heuristics that the tail size is a linear portion of the file size - see PR conversation for more. - Make`tail_start_offset` part of the table properties and deduct tail size to record in manifest for external files (e.g, file ingestion, import CF) and db repair (with no access to manifest). Pull Request resolved: https://github.com/facebook/rocksdb/pull/11406 Test Plan: 1. New UT 2. db bench Note: db bench on /tmp/ where direct read is supported is too slow to finish and the default pinning setting in db bench is not helpful to profile # sst read of Get. Therefore I hacked the following to obtain the following comparison. ``` diff --git a/table/block_based/block_based_table_reader.cc b/table/block_based/block_based_table_reader.cc index bd5669f0f..791484c1f 100644 --- a/table/block_based/block_based_table_reader.cc +++ b/table/block_based/block_based_table_reader.cc @@ -838,7 +838,7 @@ Status BlockBasedTable::PrefetchTail( &tail_prefetch_size); // Try file system prefetch - if (!file->use_direct_io() && !force_direct_prefetch) { + if (false && !file->use_direct_io() && !force_direct_prefetch) { if (!file->Prefetch(prefetch_off, prefetch_len, ro.rate_limiter_priority) .IsNotSupported()) { prefetch_buffer->reset(new FilePrefetchBuffer( diff --git a/tools/db_bench_tool.cc b/tools/db_bench_tool.cc index ea40f5fa0..39a0ac385 100644 --- a/tools/db_bench_tool.cc +++ b/tools/db_bench_tool.cc @@ -4191,6 +4191,8 @@ class Benchmark { std::shared_ptr<TableFactory>(NewCuckooTableFactory(table_options)); } else { BlockBasedTableOptions block_based_options; + block_based_options.metadata_cache_options.partition_pinning = + PinningTier::kAll; block_based_options.checksum = static_cast<ChecksumType>(FLAGS_checksum_type); if (FLAGS_use_hash_search) { ``` Create DB ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` ReadRandom ``` ./db_bench --bloom_bits=3 --use_existing_db=1 --seed=1682546046158958 --partition_index_and_filters=1 --statistics=1 -db=/dev/shm/testdb/ -benchmarks=readrandom -key_size=3200 -value_size=512 -num=1000000 -write_buffer_size=6550000 -disable_auto_compactions=false -target_file_size_base=6550000 -compression_type=none ``` (a) Existing (Use TailPrefetchStats for tail size + use seperate prefetch buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 3395 rocksdb.sst.read.micros P50 : 5.655570 P95 : 9.931396 P99 : 14.845454 P100 : 585.000000 COUNT : 999905 SUM : 6590614 ``` (b) This PR (Record tail size + use the same tail buffer in PartitionedFilter/IndexReader::CacheDependencies()) ``` rocksdb.table.open.prefetch.tail.hit COUNT : 14257 rocksdb.sst.read.micros P50 : 5.173347 P95 : 9.015017 P99 : 12.912610 P100 : 228.000000 COUNT : 998547 SUM : 5976540 ``` As we can see, we increase the prefetch tail hit count and decrease SST read count with this PR 3. Test backward compatibility by stepping through reading with post-PR code on a db generated pre-PR. Reviewed By: pdillinger Differential Revision: D45413346 Pulled By: hx235 fbshipit-source-id: 7d5e36a60a72477218f79905168d688452a4c064 |
|
|
Hui Xiao
|
151242ce46 |
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288)
Summary:
**Context:**
The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them.
**Summary**
- Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros`
- Fixed the default histogram in `RandomAccessFileReader`
- New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader`
- Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288
Test Plan:
- **Stress test**
- **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob)
- May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads.
```
./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10)
```
```
// BlockBasedTable
rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805
rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116
rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689
// PlainTable
Does not apply
```
- **Db bench 2: performance**
**Read**
SETUP: db with 900 files
```
./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none
```run till convergence
```
./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3
```
Pre-change
`readrandom [AVG 60 runs] : 21568 (± 248) ops/sec`
Post-change (no regression, -0.3%)
`readrandom [AVG 60 runs] : 21486 (± 236) ops/sec`
**Compaction/Flush**run till convergence
```
./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none
rocksdb.sst.read.micros COUNT : 33820
rocksdb.sst.read.flush.micros COUNT : 1800
rocksdb.sst.read.compaction.micros COUNT : 32020
```
Pre-change
`fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec`
Post-change (no regression, ~-0.4%)
`fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec`
Reviewed By: ajkr
Differential Revision: D44007011
Pulled By: hx235
fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
|
|
|
sdong
|
4720ba4391 |
Remove RocksDB LITE (#11147)
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2 |
|
|
Changyu Bi
|
cc6f323705 |
Include estimated bytes deleted by range tombstones in compensated file size (#10734)
Summary: compensate file sizes in compaction picking so files with range tombstones are preferred, such that they get compacted down earlier as they tend to delete a lot of data. This PR adds a `compensated_range_deletion_size` field in FileMeta that is computed during Flush/Compaction and persisted in MANIFEST. This value is added to `compensated_file_size` which will be used for compaction picking. Currently, for a file in level L, `compensated_range_deletion_size` is set to the estimated bytes deleted by range tombstone of this file in all levels > L. This helps to reduce space amp when data in older levels are covered by range tombstones in level L. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10734 Test Plan: - Added unit tests. - benchmark to check if the above definition `compensated_range_deletion_size` is reducing space amp as intended, without affecting write amp too much. The experiment set up favorable for this optimization: large range tombstone issued infrequently. Command used: ``` ./db_bench -benchmarks=fillrandom,waitforcompaction,stats,levelstats -use_existing_db=false -avoid_flush_during_recovery=true -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -max_bytes_for_level_base=134217728 -target_file_size_base=33554432 -writes_per_range_tombstone=500000 -range_tombstone_width=5000000 -num=50000000 -benchmark_write_rate_limit=8388608 -threads=16 -duration=1800 --max_num_range_tombstones=1000000000 ``` In this experiment, each thread wrote 16 range tombstones over the duration of 30 minutes, each range tombstone has width 5M that is the 10% of the key space width. Results shows this PR generates a smaller DB size. Compaction stats from this PR: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 2/0 31.54 MB 0.5 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 63.4 135.56 110.94 544 0.249 0 0 0.0 0.0 L4 3/0 96.55 MB 0.8 18.5 6.7 11.8 18.4 6.6 0.0 2.7 65.3 64.9 290.08 284.03 108 2.686 284M 1957K 0.0 0.0 L5 15/0 404.41 MB 1.0 19.1 7.7 11.4 18.8 7.4 0.3 2.5 66.6 65.7 292.93 285.34 220 1.332 293M 3808K 0.0 0.0 L6 143/0 4.12 GB 0.0 45.0 7.5 37.5 41.6 4.1 0.0 5.5 71.2 65.9 647.00 632.66 251 2.578 739M 47M 0.0 0.0 Sum 163/0 4.64 GB 0.0 82.6 21.9 60.7 87.2 26.5 0.3 10.4 61.9 65.4 1365.58 1312.97 1123 1.216 1318M 52M 0.0 0.0 ``` Compaction stats from main: ``` Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) CompMergeCPU(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop Rblob(GB) Wblob(GB) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0.00 KB 0.0 0.0 0.0 0.0 8.4 8.4 0.0 1.0 0.0 60.5 142.12 115.89 569 0.250 0 0 0.0 0.0 L4 3/0 85.68 MB 1.0 17.7 6.8 10.9 17.6 6.7 0.0 2.6 62.7 62.3 289.05 281.79 112 2.581 272M 2309K 0.0 0.0 L5 11/0 293.73 MB 1.0 18.8 7.5 11.2 18.5 7.2 0.5 2.5 64.9 63.9 296.07 288.50 220 1.346 288M 4365K 0.0 0.0 L6 130/0 3.94 GB 0.0 51.5 7.6 43.9 47.9 3.9 0.0 6.3 67.2 62.4 784.95 765.92 258 3.042 848M 51M 0.0 0.0 Sum 144/0 4.31 GB 0.0 88.0 21.9 66.0 92.3 26.3 0.5 11.0 59.6 62.5 1512.19 1452.09 1159 1.305 1409M 58M 0.0 0.0``` Reviewed By: ajkr Differential Revision: D39834713 Pulled By: cbi42 fbshipit-source-id: fe9341040b8704a8fbb10cad5cf5c43e962c7e6b |
|
|
Hui Xiao
|
98d5db5c2e |
Sort L0 files by newly introduced epoch_num (#10922)
Summary:
**Context:**
Sorting L0 files by `largest_seqno` has at least two inconvenience:
- File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap.
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n")
- insert k1@1 to memtable m1
- ingest file s1 with k2@2, ingest file s2 with k3@3
- insert k4@4 to m1
- compact files s1, s2 and result in new file s3 of seqno range [2, 3]
- flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1
- However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption.
- Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption
- For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example)
- an existing SST s1 contains only k1@1
- insert k1@2 to memtable m1
- ingest file s2 with k3@3, ingest file s3 with k4@4
- insert single delete k5@5 in m1
- flush m1 and result in new file s4 of seqno range [2, 5]
- compact s1, s2, s3 and result in new file s5 of seqno range [1, 4]
- compact s4 and result in new file s6 of seqno range [2] due to single delete
- By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno`
Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways:
- In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more.
- In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption.
**Summary:**
- Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`.
- `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`)
- Compaction output file is assigned with the minimum `epoch_number` among input files'
- Refit level: reuse refitted file's epoch_number
- Other paths needing `epoch_number` treatment:
- Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`
- Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`.
- Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair).
- Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder.
- Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery
- Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more
- Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag`
- Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above
- Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`.
- Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR.
- Misc:
- update existing tests with `epoch_number` so make check will pass
- update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases
- assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922
Test Plan:
- `make check`
- New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc`
- Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930
- [Ongoing] Compatibility test: manually run
|
|
|
Peter Dillinger
|
2d0380adbe |
Allow manifest fix-up without requiring prior state (#10796)
Summary: This change is motivated by ensuring that `ldb update_manifest` or `UpdateManifestForFilesState` can run without expecting files to open when the old temperature is provided (in case the FileSystem strictly interprets non-kUnknown), but ended up fixing a problem in `OfflineManifestWriter` (used by `ldb unsafe_remove_sst_file`) where it would open some SST files during recovery and expect them to match the prior manifest state, even if not required by the intended new state. Also update BackupEngine to retry with Temperature kUnknown when reading file with potentially "wrong" temperature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10796 Test Plan: tests added/updated, that fail before the change(s) and now pass Reviewed By: jay-zhuang Differential Revision: D40232645 Pulled By: jay-zhuang fbshipit-source-id: b5aa2688aecfe0c320b80a7da689b315414c20be |
|
|
Hui Xiao
|
e484b81eee |
Sync dir containing CURRENT after RenameFile on CURRENT as much as possible (#10573)
Summary:
**Context:**
Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation.
This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want.
The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` )
```
./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35
```
```
stderr:
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.`
```
**Summary:**
The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following:
- Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file
- Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr.
- Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file`
- Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`.
- `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573
Test Plan:
- `make check`
- Passed the repro db_stress command
- For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed.
Reviewed By: ajkr
Differential Revision: D39005886
Pulled By: hx235
fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
|
|
|
Yanqin Jin
|
fbfcf5cbcd |
Remove unused fields from FileMetaData (temporarily) (#10443)
Summary: FileMetaData::[min|max]_timestamp are not currently being used or tracked by RocksDB, even when user-defined timestamp is enabled. Each of them is a std::string which can occupy 32 bytes. Remove them for now. They may be added back when we have a pressing need for them. When we do add them back, consider store them in a more compact way, e.g. one boolean flag and a byte array of size 16. Per file min/max timestamp bounds are available as table properties. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10443 Test Plan: make check Reviewed By: pdillinger Differential Revision: D38292275 Pulled By: riversand963 fbshipit-source-id: 841dc4e855ad8f8481c80cb020603de9607c9c94 |
|
|
Jay Zhuang
|
c6d326d3d7 |
Track SST unique id in MANIFEST and verify (#9990)
Summary: Start tracking SST unique id in MANIFEST, which is used to verify with SST properties to make sure the SST file is not overwritten or misplaced. A DB option `try_verify_sst_unique_id` is introduced to enable/disable the verification, if enabled, it opens all SST files during DB-open to read the unique_id from table properties (default is false), so it's recommended to use it with `max_open_files = -1` to pre-open the files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990 Test Plan: unittests, format-compatible test, mini-crash Reviewed By: anand1976 Differential Revision: D36381863 Pulled By: jay-zhuang fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f |
|
|
Peter Dillinger
|
a8a422e962 |
Add manifest fix-up utility for file temperatures (#9683)
Summary: The goal of this change is to allow changes to the "current" (in FileSystem) file temperatures to feed back into DB metadata, so that they can inform decisions and stats reporting. In part because of modular code factoring, it doesn't seem easy to do this automagically, where opening an SST file and observing current Temperature different from expected would trigger a change in metadata and DB manifest write (essentially giving the deep read path access to the write path). It is also difficult to do this while the DB is open because of the limitations of LogAndApply. This change allows updating file temperature metadata on a closed DB using an experimental utility function UpdateManifestForFilesState() or `ldb update_manifest --update_temperatures`. This should suffice for "migration" scenarios where outside tooling has placed or re-arranged DB files into a (different) tiered configuration without going through RocksDB itself (currently, only compaction can change temperature metadata). Some details: * Refactored and added unit test for `ldb unsafe_remove_sst_file` because of shared functionality * Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext move constructor (related to an older draft of this change) Possible follow-up work: * Support updating manifest with file checksums, such as when a new checksum function is used and want existing DB metadata updated for it. * It's possible that for some repair scenarios, lighter weight than full repair, we might want to support UpdateManifestForFilesState() to modify critical file details like size or checksum using same algorithm. But let's make sure these are differentiated from modifying file details in ways that don't suspect corruption (or require extreme trust). Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683 Test Plan: unit tests added Reviewed By: jay-zhuang Differential Revision: D34798828 Pulled By: pdillinger fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554 |
|
|
sdong
|
fdf882ded2 |
Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary: When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433 Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag. Differential Revision: D19977691 fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e |
|
|
Vijay Nadimpalli
|
49c5a12dbe |
Organizing rocksdb/db directory
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5390 Differential Revision: D15579388 Pulled By: vjnadimpalli fbshipit-source-id: 5bfc95e31554b8ff05b97b76d6534113f527f366 |
|
|
David Lai
|
3be9b36453 |
comment unused parameters to turn on -Wunused-parameter flag
Summary: This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557. Closes https://github.com/facebook/rocksdb/pull/3662 Differential Revision: D7426121 Pulled By: Dayvedde fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352 |
|
|
Siying Dong
|
21696ba502 |
Replace dynamic_cast<>
Summary: Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available. Some nontrivial changes: 1. Add Comparator::GetRootComparator() to get around the internal comparator hack 2. Add the two experiemental functions to DB 3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string 4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric. Closes https://github.com/facebook/rocksdb/pull/2645 Differential Revision: D5502723 Pulled By: siying fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c |
|
|
Siying Dong
|
3c327ac2d0 |
Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589 Differential Revision: D5431502 Pulled By: siying fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75 |
|
|
Siying Dong
|
d616ebea23 |
Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226 Differential Revision: D4967547 Pulled By: siying fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4 |
|
|
Baraa Hamodi
|
21e95811d1 | Updated all copyright headers to the new format. | |
|
Giuseppe Ottaviano
|
2dc421df48 |
Implement DB::PromoteL0 method
Summary: This diff implements a new `DB` method `PromoteL0` which moves all files in L0 to a given level skipping compaction, provided that the files have disjoint ranges and all levels up to the target level are empty. This method provides finer-grain control for trivial compactions, and it is useful for bulk-loading pre-sorted keys. Compared to D34797, it does not change the semantics of an existing operation, which can impact existing code. PromoteL0 is designed to work well in combination with the proposed `GetSstFileWriter`/`AddFile` interface, enabling to "design" the level structure by populating one level at a time. Such fine-grained control can be very useful for static or mostly-static databases. Test Plan: `make check` Reviewers: IslamAbdelRahman, philipp, MarkCallaghan, yhchiang, igor, sdong Reviewed By: sdong Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D37107 |
|
|
Igor Canadi
|
6059bdf86a |
Add experimental API MarkForCompaction()
Summary: Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys). All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart. MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction. Test Plan: added a new unit test Reviewers: yhchiang, rven, MarkCallaghan, sdong Reviewed By: sdong Subscribers: yoshinorim, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37083 |