Summary:
With atomic_flush=true, a flush job with younger memtables wait for older memtables to be installed before install its memtables. If the flush for older memtables failed, auto-recovery starts a resume thread which can becomes stuck waiting for all background work to finish (including the flush for younger memtables). If a non-recovery flush starts now and tries to flush, it can make the situation worse since it will fail due to background error but never rollback its memtable: 269478ee46/db/db_impl/db_impl_compaction_flush.cc (L725) This prevents any future flush to pick old memtables.
A more detailed repro is in unit test.
This PR fixes this issue by
1. Ensure we rollback memtables if an atomic flush fails due to background error
2. When there is a background error, abort atomic flushes that are waiting for older memtables to be installed
3. Do not schedule non-recovery flushes when there is a background error that stops background work
There was another issue with atomic_flush=true where DB can hang during DB close, see more in #11867. The fix in this PR, specifically fix 2 above, should be enough to resolve it too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11872
Test Plan: new unit test.
Reviewed By: jowlyzhang
Differential Revision: D49556867
Pulled By: cbi42
fbshipit-source-id: 4a0210ff28a8552a99ece7fbb0f574fd24b4da3f
Summary:
when atomic_flush=false, there are certain cases where we try to install memtable results with already deleted SST files. This can happen when the following sequence events happen:
```
Start Flush0 for memtable M0 to SST0
Start Flush1 for memtable M1 to SST1
Flush 1 returns OK, but don't install to MANIFEST and let whoever flushes M0 to take care of it
Flush0 finishes with a retryable IOError, it rollbacks M0, (incorrectly) does not rollback M1, and deletes SST0 and SST1
Starts Flush2 for M0, it does not pick up M1 since it thought M1 is flushed
Flush2 writes SST2 and finishes OK, tries to install SST2 and SST1
Error opening SST1 since it's already deleted with an error message like the following:
IO error: No such file or directory: While open a file for random read: /tmp/rocksdbtest-501/db_flush_test_3577_4230653031040984171/000011.sst: No such file or directory
```
This happens since:
1. We currently only rollback the memtables that we are flushing in a flush job when atomic_flush=false.
2. Pending output SSTs from previous flushes are deleted since a pending file number is released whenever a flush job is finished no matter of flush status: f42e70bf56/db/db_impl/db_impl_compaction_flush.cc (L3161)
This PR fixes the issue by rollback these pending flushes.
There is another issue where if a new flush for new memtable starts and finishes after Flush0 finishes. Its output may also be deleted (see more in unit test). It is fixed by checking bg error status before installing a memtable result, and rollback if there is an error.
There is a more efficient fix where we just don't release the pending file output number for flushes that delegate installation. It is more efficient since it does not have to rewrite the flush output file. With the fix in this PR, we can end up with a giant file if a lot of memtables are being flushed together. However, the more efficient fix is a bit more complicated to implement (requires associating such pending file numbers with flush job/memtables) and is more risky since it changes normal flush code path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11865
Test Plan: * Added repro unit tests.
Reviewed By: anand1976
Differential Revision: D49484922
Pulled By: cbi42
fbshipit-source-id: 25b536c08f4e02e7f1d0f86571663737d2b5d53d
Summary:
It seems the flag `-fno-elide-constructors` is incorrectly overwritten in Makefile by 9c2ebcc2c3/Makefile (L243)
Applying the change in PR https://github.com/facebook/rocksdb/issues/11675 shows a lot of missing status checks. This PR adds the missing status checks.
Most of changes are just adding asserts in unit tests. I'll add pr comment around more interesting changes that need review.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11686
Test Plan: change Makefile as in https://github.com/facebook/rocksdb/issues/11675, and run `ASSERT_STATUS_CHECKED=1 TEST_UINT128_COMPAT=1 ROCKSDB_MODIFY_NPHASH=1 LIB_MODE=static OPT="-DROCKSDB_NAMESPACE=alternative_rocksdb_ns" make V=1 -j24 J=24 check`
Reviewed By: hx235
Differential Revision: D48176132
Pulled By: cbi42
fbshipit-source-id: 6758946cfb1c6ff84c4c1e0ca540d05e6fc390bd
Summary:
**Context:**
Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes .
```
./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 10
kill $pid
sleep 0.2
./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 &
pid=$!
sleep 0.2
sleep 40
kill $pid
sleep 0.2
Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound:
Crash-recovery verification failed :(
No writes or ops?
Verification failed :(
```
The bug is due to the following:
- When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`.
- But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N.
- However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M.
**Summary:**
- Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`.
- For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148
Test Plan:
- New unit test failed before the fix and passes after
- Make check
- Rehearsal stress test
Reviewed By: ajkr
Differential Revision: D42799871
Pulled By: hx235
fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
**Context:**
Concurrent flushes on the same CF can set on `ColumnFamilyData::flush_reason` before each other flush finishes. An symptom is one CF has different flush_reason with others though all of them are in an atomic flush `db_stress: db/db_impl/db_impl_compaction_flush.cc:423: rocksdb::Status rocksdb::DBImpl::AtomicFlushMemTablesToOutputFiles(const rocksdb::autovector<rocksdb::DBImpl::BGFlushArg>&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority): Assertion cfd->GetFlushReason() == cfds[0]->GetFlushReason() failed. `
**Summary:**
Suggested by ltamasi, we now refactor and let FlushRequest/Job to own flush_reason as there is no good way to define `ColumnFamilyData::flush_reason` in face of concurrent flushes on the same CF (which wasn't the case a long time ago when `ColumnFamilyData::flush_reason ` first introduced`)
**Tets:**
- new unit test
- make check
- aggressive crash test rehearsal
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11111
Reviewed By: ajkr
Differential Revision: D42644600
Pulled By: hx235
fbshipit-source-id: 8589c8184869d3415e5b780c887f877818a5ebaf
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910
Reviewed By: riversand963
Differential Revision: D40880683
Pulled By: ajkr
fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
Summary:
When `FlushOptions::wait` is set to false, manual flush should not stall forever.
If the database has already stopped writes, then the thread calling `DB::Flush()` with
`FlushOptions::wait=false` should not enter the `DBImpl::write_thread_`.
To prevent this, we should do a check at the beginning and return `TryAgain()`
Resolves: https://github.com/facebook/rocksdb/issues/9892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10001
Reviewed By: siying
Differential Revision: D36422303
Pulled By: siying
fbshipit-source-id: 723bd3065e8edc4f17c82449d0d6b95a2381ac0a
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
min_log_number_to_keep denotes that the WALs whose numbers are below
this value **will** be deleted by RocksDB.
delete_wals_before will be used by RocksDB if
track_and_verify_wals_in_manifest is set to true. During recovery,
RocksDB uses the info encoded in delete_wals_before to reconstruct its
knowledge about what WALs to expect existing.
If these two tags are not encoded in the same VersionEdit, then it's
possible for min_log_number_to_keep=100 to exist, but
delete_wals_before=100 to be lost due to power failure. Subsequent
recovery will delete 99.log. If the db crashes again, the following
recovery will expect to see 99.log since there is no
delete_wals_before=100 in the MANIFEST, but the WAL is already deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9766
Test Plan:
First of all, make check.
Second, format compatibility.
SHORT_TEST=1 ./tools/check_format_compatible.sh
Reviewed By: ltamasi
Differential Revision: D35203623
Pulled By: riversand963
fbshipit-source-id: 45623fc4b4b50d299d5e0f9559a3a4c5e9522c8f
Summary:
Change the `MemPurge` code to address a failure during a crash test reported in https://github.com/facebook/rocksdb/issues/8958.
### Details and results of the crash investigation:
These failures happened in a specific scenario where the list of immutable tables was composed of 2 or more memtables, and the last memtable was the output of a previous `Mempurge` operation. Because the `PickMemtablesToFlush` function included a sorting of the memtables (previous PR related to the Mempurge project), and because the `VersionEdit` of the flush class is piggybacked onto a single one of these memtables, the `VersionEdit` was not properly selected and applied to the `VersionSet` of the DB. Since the `VersionSet` was not edited properly, the database was losing track of the SST file created during the flush process, which was subsequently deleted (and as you can expect, caused the tests to crash).
The following command consistently failed, which was quite convenient to investigate the issue:
`$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done`
### Solution proposed
The memtables are no longer sorted based on their `memtableID` in the `PickMemtablesToFlush` function. Additionally, the `next_log_number` of the memtable created as an output of the `Mempurge` function now takes in the correct value (the log number of the first memtable being mempurged). Finally, the VersionEdit object of the flush class now takes the maximum `next_log_number` of the stack of memtables being flushed, which doesnt change anything when Mempurge is `off` but becomes necessary when Mempurge is `on`.
### Testing of the solution
The following command no longer fails:
``$ while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done``
Additionally, I ran `db_crashtest` (`whitebox` and `blackbox`) for 2.5 hours with MemPurge on and did not observe any crash.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9671
Reviewed By: pdillinger
Differential Revision: D34697424
Pulled By: bjlemaire
fbshipit-source-id: d1ab675b361904351ac81a35c184030e52222874
Summary:
This bug affects use cases that meet the following conditions
- (has only the default column family or disables WAL) and
- has at least one event listener
- atomic flush is NOT affected.
If the above conditions meet, then RocksDB can release the db mutex before picking all the
existing memtables to flush. In the meantime, a snapshot can be created and db's sequence
number can still be incremented. The upcoming flush will ignore this snapshot.
A later read using this snapshot can return incorrect result.
To fix this issue, we call the listeners callbacks after picking the memtables so that we avoid
creating snapshots during this interval.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9648
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D34555456
Pulled By: riversand963
fbshipit-source-id: 1438981e9f069a5916686b1a0ad7627f734cf0ee
Summary:
We often see flaky tests due to `DB::Flush()` or `DBImpl::TEST_WaitForFlushMemTable()` not waiting until event listeners complete. For example, https://github.com/facebook/rocksdb/issues/9084, https://github.com/facebook/rocksdb/issues/9400, https://github.com/facebook/rocksdb/issues/9528, plus two new ones this week: "EventListenerTest.OnSingleDBFlushTest" and "DBFlushTest.FireOnFlushCompletedAfterCommittedResult". I ran a `make check` with the below race condition-coercing patch and fixed issues it found besides old BlobDB.
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 0e1864788..aaba68c4a 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -861,6 +861,8 @@ void DBImpl::NotifyOnFlushCompleted(
mutable_cf_options.level0_stop_writes_trigger);
// release lock while notifying events
mutex_.Unlock();
+ bg_cv_.SignalAll();
+ sleep(1);
{
for (auto& info : *flush_jobs_info) {
info->triggered_writes_slowdown = triggered_writes_slowdown;
```
The reason I did not fix old BlobDB issues is because it appears to have a fundamental (non-test) issue. In particular, it uses an EventListener to keep track of the files. OnFlushCompleted() could be delayed until even after a compaction involving that flushed file completes, causing the compaction to unexpectedly delete an untracked file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9617
Test Plan: `make check` including the race condition coercing patch
Reviewed By: hx235
Differential Revision: D34384022
Pulled By: ajkr
fbshipit-source-id: 2652ded39b415277c5d6a628414345223930514e
Summary:
The patch replaces `std::map` with a sorted `std::vector` for
`VersionStorageInfo::blob_files_` and preallocates the space
for the `vector` before saving the `BlobFileMetaData` into the
new `VersionStorageInfo` in `VersionBuilder::Rep::SaveBlobFilesTo`.
These changes reduce the time the DB mutex is held while
saving new `Version`s, and using a sorted `vector` also makes
lookups faster thanks to better memory locality.
In addition, the patch introduces helper methods
`VersionStorageInfo::GetBlobFileMetaData` and
`VersionStorageInfo::GetBlobFileMetaDataLB` that can be used by
clients to perform lookups in the `vector`, and does some general
cleanup in the parts of code where blob file metadata are used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9526
Test Plan:
Ran `make check` and the crash test script for a while.
Performance was tested using a load-optimized benchmark (`fillseq` with vector memtable, no WAL) and small file sizes so that a significant number of files are produced:
```
numactl --interleave=all ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/ltamasi-dbbench --wal_dir=/data/ltamasi-dbbench --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --enable_blob_files=1 --blob_file_size=16777216 --min_blob_size=0 --blob_compression_type=lz4 --enable_blob_garbage_collection=1 --seed=<some value>
```
Final statistics before the patch:
```
Cumulative writes: 0 writes, 700M keys, 0 commit groups, 0.0 writes per commit group, ingest: 284.62 GB, 121.27 MB/s
Interval writes: 0 writes, 334K keys, 0 commit groups, 0.0 writes per commit group, ingest: 139.28 MB, 72.46 MB/s
```
With the patch:
```
Cumulative writes: 0 writes, 760M keys, 0 commit groups, 0.0 writes per commit group, ingest: 308.66 GB, 131.52 MB/s
Interval writes: 0 writes, 445K keys, 0 commit groups, 0.0 writes per commit group, ingest: 185.35 MB, 93.15 MB/s
```
Total time to complete the benchmark is 2611 seconds with the patch, down from 2986 secs.
Reviewed By: riversand963
Differential Revision: D34082728
Pulled By: ltamasi
fbshipit-source-id: fc598abf676dce436734d06bb9d2d99a26a004fc
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
After RocksDB 6.19 and before this PR, RocksDB FlushJob may pick more memtables to flush beyond synced WALs.
This can be problematic if there are multiple column families, since it can prematurely advance the flushed column
family's log_number. Should subsequent attempts fail to sync the latest WALs and the database goes
through a recovery, it may detect corrupted WAL number below the flushed column family's log number
and complain about column family inconsistency.
To fix, we record the maximum memtable ID of the column family being flushed. Then we call SyncClosedLogs()
so that all closed WALs at the time when memtable ID is recorded will be synced.
I also disabled a unit test temporarily due to reasons described in https://github.com/facebook/rocksdb/issues/9151
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9142
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D32299956
Pulled By: riversand963
fbshipit-source-id: 0da75888177d91905cf8c9d00605b73afb5970a7
Summary:
TSAN reported data race on count variables in MemPurgeBasic
test. This suggests the test could fail if mempurges were slow enough
that they don't complete before the count variables being checked, but
injecting a long sleep into MemPurge (outside DB mutex) confirms that
blocked writes ensure enough mempurges/flushes happen to make the test
pass. All the possible different values on testing should be OK to make
the test pass.
So this change makes the variables atomic so that up-to-date value is
always read and TSAN report suppressed. I have also used `.exchange(0)`
to make the checking less stateful by "popping off" all the accumulated
counts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9115
Test Plan: updated test, watch for any flakiness
Reviewed By: riversand963
Differential Revision: D32114432
Pulled By: pdillinger
fbshipit-source-id: c985609d39896a0d8f69ebc87b221e688609bdd8
Summary:
DBFlushTest.FireOnFlushCompletedAfterCommittedResult uses test sync
points to coordinate interleaving of different threads. Before this PR,
the test writes some data to memtable, triggers a manual flush, and
triggers a second manual flush after a first bg flush thread starts
executing. Though unlikely, it is possible for the second bg flush
thread to run faster than the first bg flush thread and deques flush
queue first. In this case, the original test will fail.
The fix is to wait until the first bg flush thread deques the flush
queue before triggering second manual flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9083
Test Plan: ./db_flush_test --gtest_filter=DBFlushTest.FireOnFlushCompletedAfterCommittedResult
Reviewed By: jay-zhuang
Differential Revision: D31951239
Pulled By: riversand963
fbshipit-source-id: f32d7cdabe6ad6808fd18e54e663936dc0a9edb4
Summary:
In atomic flush, concurrent background flush threads will commit to the MANIFEST
one by one, in the order of the IDs of their picked memtables for all included column
families. Each time, a background flush thread decides whether to wait based on two
criteria:
- Is db stopped? If so, don't wait.
- Am I the one to commit the currently earliest memtable? If so, don't wait and ready to go.
When atomic flush was implemented, error writing to or syncing the MANIFEST would
cause the db to be stopped. Therefore, this background thread does not have to check
for the background error while waiting. If there has been such an error, `DBStopped()`
would have been true, and this thread will **not** wait forever.
After we improved error handling, RocksDB may map an IOError while writing to MANIFEST
to a soft error, if there is no WAL. This requires the background threads to check for
background error while waiting. Otherwise, a background flush thread may wait forever.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9034
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D31639225
Pulled By: riversand963
fbshipit-source-id: e9ab07c4d8f2eade238adeefe3e42dd9a5a3ebbd
Summary:
Made SystemClock into a Customizable class, complete with CreateFromString.
Cleaned up some of the existing SystemClock implementations that were redundant (NoSleep was the same as the internal one for MockEnv).
Changed MockEnv construction to allow Clock to be passed to the Memory/MockFileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8636
Reviewed By: zhichao-cao
Differential Revision: D30483360
Pulled By: mrambacher
fbshipit-source-id: cd0e3a876c39f8c98fe13374c06e8edbd5b9f2a1
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
Previously, when a `FlushJob` was redirected to a MemPurge, the function `DBImpl::NotifyOnFlushComplete` was called, which created a series of issues because the JobInfo was not correctly collected from the memtables.
This diff aims at correcting these two issues (`FlushJobInfo` collection in `FlushJob::MemPurge` , no call to `DBImpl::NotifyOnFlushComplete` after successful mempurge).
Event listeners were added to the unit tests to handle these situations.
Surprisingly none of the crashtests caught this issue, I will try to add event listeners to crash tests in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8672
Reviewed By: akankshamahajan15
Differential Revision: D30383109
Pulled By: bjlemaire
fbshipit-source-id: 35a8d4295886923ee4049a6447f00022cb221c73
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
Add `experimental_mempurge_policy` option flag and introduce two new `MemPurge` (Memtable Garbage Collection) policies: 'ALWAYS' and 'ALTERNATE'. Default value: ALTERNATE.
`ALWAYS`: every flush will first go through a `MemPurge` process. If the output is too big to fit into a single memtable, then the mempurge is aborted and a regular flush process carries on. `ALWAYS` is designed for user that need to reduce the number of L0 SST file created to a strict minimum, and can afford a small dent in performance (possibly hits to CPU usage, read efficiency, and maximum burst write throughput).
`ALTERNATE`: a flush is transformed into a `MemPurge` except if one of the memtables being flushed is the product of a previous `MemPurge`. `ALTERNATE` is a good tradeoff between reduction in number of L0 SST files created and performance. `ALTERNATE` perform particularly well for completely random garbage ratios, or garbage ratios anywhere in (0%,50%], and even higher when there is a wild variability in garbage ratios.
This PR also includes support for `experimental_mempurge_policy` in `db_bench`.
Testing was done locally by replacing all the `MemPurge` policies of the unit tests with `ALTERNATE`, as well as local testing with `db_crashtest.py` `whitebox` and `blackbox`. Overall, if an `ALWAYS` mempurge policy passes the tests, there is no reasons why an `ALTERNATE` policy would fail, and therefore the mempurge policy was set to `ALWAYS` for all mempurge unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8583
Reviewed By: pdillinger
Differential Revision: D29888050
Pulled By: bjlemaire
fbshipit-source-id: e2cf26646d66679f6f5fb29842624615610759c1
Summary:
The PerThreadDBPath has already specified a slash. It does not need to be specified when initializing the test path.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8555
Reviewed By: ajkr
Differential Revision: D29758399
Pulled By: jay-zhuang
fbshipit-source-id: 6d2b878523e3e8580536e2829cb25489844d9011
Summary:
In this PR, `mempurge` is made compatible with the Write Ahead Log: in case of recovery, the DB is now capable of recovering the data that was "mempurged" and kept in the `imm()` list of immutable memtables.
The twist was to add a uint64_t to the `memtable` struct to store the number of the earliest log file containing entries from the `memtable`. When a `Flush` operation is replaced with a `MemPurge`, the `VersionEdit` (which usually contains the new min log file number to pick up for recovery and the level 0 file path of the newly created SST file) is no longer appended to the manifest log, and every time the `deleteWal` method is called, a check is made on the list of immutable memtables.
This PR also includes a unit test that verifies that no data is lost upon Reopening of the database when the mempurge feature is activated. This extensive unit test includes two column families, with valid data contained in the imm() at time of "crash"/reopening (recovery).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8528
Reviewed By: pdillinger
Differential Revision: D29701097
Pulled By: bjlemaire
fbshipit-source-id: 072a900fb6ccc1edcf5eef6caf88f3060238edf9
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
Summary:
**Summary**:
2 new statistics counters are added to RocksDB: `MEMTABLE_PAYLOAD_BYTES_AT_FLUSH` and `MEMTABLE_GARBAGE_BYTES_AT_FLUSH`. The former tracks how many raw bytes of useful data are present on the memtable at flush time, whereas the latter is tracks how many of these raw bytes are considered garbage, meaning that they ended up not being imported on the SSTables resulting from the flush operations.
**Unit test**: run `make db_flush_test -j$(nproc); ./db_flush_test` to run the unit test.
This executable includes 3 tests, that test support and correct stat calculations for workloads with inserts, deletes, and DeleteRanges. The parameters are set such that the workloads are performed on a single memtable, and a single SSTable is created as a result of the flush operation. The flush operation is manually called in the test file. The tests verify that the values of these 2 statistics counters introduced in this PR can be exactly predicted, showing that we have a full understanding of the underlying operations.
**Performance testing**:
`./db_bench -statistics -benchmarks=fillrandom -num=10000000` repeated 10 times.
Timing done using "date" function in a bash script.
_Results_:
Original Rocksdb fork: mean 66.6 sec, std 1.18 sec.
This feature branch: mean 67.4 sec, std 1.35 sec.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8411
Reviewed By: akankshamahajan15
Differential Revision: D29150629
Pulled By: bjlemaire
fbshipit-source-id: 7b3c2e86d50c6aa34fa50fd134282eacb543a5b1
Summary:
In DBImpl::CloseHelper, we wait for bg_compaction_scheduled_
and bg_flush_scheduled_ to drop to 0. Unschedule is called prior
to cancel any unscheduled flushes/compactions. It is assumed that
anything in the high priority is a flush, and anything in the low
priority pool is a compaction. This assumption, however, is broken when
the high-pri pool is full.
As a result, bg_compaction_scheduled_ can go < 0 and bg_flush_scheduled_
will remain > 0 and DB can be in hang state.
The fix is, we decrement the `bg_{flush,compaction,bottom_compaction}_scheduled_`
inside the `Unschedule{Flush,Compaction,BottomCompaction}Callback()`s. DB
`mutex_` will make the counts atomic in `Unschedule`.
Related discussion: https://github.com/facebook/rocksdb/issues/7928
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8125
Test Plan: Added new test case which hangs without the fix.
Reviewed By: jay-zhuang
Differential Revision: D27390043
Pulled By: ajkr
fbshipit-source-id: 78a367fba9a59ac5607ad24bd1c46dc16d5ec110
Summary:
In previous codebase, if WAL is used, all the retryable IO Error will be treated as hard error. So write is stalled. In this PR, the retryable IO error from WAL sync is separated from SST file flush io error. If WAL Sync is ok and retryable IO Error only happens during SST flush, the error is mapped to soft error. So user can continue insert to Memtable and append to WAL.
Resolve the bug that if WAL sync fails, the memtable status does not roll back due to calling PickMemtable early than calling and checking SyncClosedLog.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8049
Test Plan: added new unit test, make check
Reviewed By: anand1976
Differential Revision: D26965529
Pulled By: zhichao-cao
fbshipit-source-id: f5fecb66602212523c92ee49d7edcb6065982410
Summary:
The patch breaks down the "bytes written" (as well as the "number of output files")
compaction statistics into two, so the values are logged separately for table files
and blob files in the info log, and are shown in separate columns (`Write(GB)` for table
files, `Wblob(GB)` for blob files) when the compaction statistics are dumped.
This will also come in handy for fixing the write amplification statistics, which currently
do not consider the amount of data read from blob files during compaction. (This will
be fixed by an upcoming patch.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8013
Test Plan: Ran `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D26742156
Pulled By: ltamasi
fbshipit-source-id: 31d18ee8f90438b438ca7ed1ea8cbd92114442d5
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
The logic for computing min_log_number_to_keep in atomic flush was incorrect.
For example, when all column families are flushed, the min_log_number_to_keep should be the latest new log. But the incorrect logic calls `PrecomputeMinLogNumberToKeepNon2PC` for each column family, and returns the minimum of them. However, `PrecomputeMinLogNumberToKeepNon2PC(cf)` assumes column families other than `cf` are flushed, but in case all column families are flushed, this assumption is incorrect.
Without this fix, the WAL referenced by the computed min_log_number_to_keep may actually contain no unflushed data, so the WAL might have actually been deleted from disk on recovery, then an incorrect error `Corruption: missing WAL` will be reported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7660
Test Plan:
run `make crash_test_with_atomic_flush` on devserver
added a unit test in `db_flush_test`
Reviewed By: riversand963
Differential Revision: D24906265
Pulled By: cheng-chang
fbshipit-source-id: 08deda62e71f67f59e3b7925cdd86dd09bd4f430
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.
There will be a separate follow-up patch to perform blob garbage collection
during compactions.
In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24404696
Pulled By: ltamasi
fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345
Test Plan: Tested using `make check` and `db_bench`.
Reviewed By: riversand963
Differential Revision: D23506369
Pulled By: ltamasi
fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
