rocksdb/db/compaction/compaction.cc

1082 lines
39 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/compaction/compaction.h"
#include <cinttypes>
#include <vector>
#include "db/column_family.h"
Add support for range deletion when user timestamps are not persisted (#12254) Summary: For the user defined timestamps in memtable only feature, some special handling for range deletion blocks are needed since both the key (start_key) and the value (end_key) of a range tombstone can contain user-defined timestamps. Handling for the key is taken care of in the same way as the other data blocks in the block based table. This PR adds the special handling needed for the value (end_key) part. This includes: 1) On the write path, when L0 SST files are first created from flush, user-defined timestamps are removed from an end key of a range tombstone. There are places where it's logically removed (replaced with a min timestamp) because there is still logic with the running comparator that expects a user key that contains timestamp. And in the block based builder, it is eventually physically removed before persisted in a block. 2) On the read path, when range deletion block is being read, we artificially pad a min timestamp to the end key of a range tombstone in `BlockBasedTableReader`. 3) For file boundary `FileMetaData.largest`, we artificially pad a max timestamp to it if it contains a range deletion sentinel. Anytime when range deletion end_key is used to update file boundaries, it's using max timestamp instead of the range tombstone's actual timestamp to mark it as an exclusive end. https://github.com/facebook/rocksdb/blob/d69628e6ced20ff859381d1eda55675f7f93a0eb/db/dbformat.h#L923-L935 This max timestamp is removed when in memory `FileMetaData.largest` is persisted into Manifest, we pad it back when it's read from Manifest while handling related `VersionEdit` in `VersionEditHandler`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12254 Test Plan: Added unit test and enabled this feature combination's stress test. Reviewed By: cbi42 Differential Revision: D52965527 Pulled By: jowlyzhang fbshipit-source-id: e8315f8a2c5268e2ae0f7aec8012c266b86df985
2024-01-29 19:37:34 +00:00
#include "db/dbformat.h"
Compare the number of input keys and processed keys for compactions (#11571) Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
2023-07-28 16:47:31 +00:00
#include "logging/logging.h"
#include "rocksdb/compaction_filter.h"
#include "rocksdb/sst_partitioner.h"
#include "test_util/sync_point.h"
#include "util/string_util.h"
namespace ROCKSDB_NAMESPACE {
int sstableKeyCompare(const Comparator* uc, const Slice& a, const Slice& b) {
auto c = uc->CompareWithoutTimestamp(ExtractUserKey(a), ExtractUserKey(b));
if (c != 0) {
return c;
}
auto a_footer = ExtractInternalKeyFooter(a);
auto b_footer = ExtractInternalKeyFooter(b);
if (a_footer == kRangeTombstoneSentinel) {
if (b_footer != kRangeTombstoneSentinel) {
return -1;
}
} else if (b_footer == kRangeTombstoneSentinel) {
return 1;
}
return 0;
}
int sstableKeyCompare(const Comparator* user_cmp, const InternalKey* a,
const InternalKey& b) {
if (a == nullptr) {
return -1;
}
return sstableKeyCompare(user_cmp, *a, b);
}
int sstableKeyCompare(const Comparator* user_cmp, const InternalKey& a,
const InternalKey* b) {
if (b == nullptr) {
return -1;
}
return sstableKeyCompare(user_cmp, a, *b);
}
uint64_t TotalFileSize(const std::vector<FileMetaData*>& files) {
uint64_t sum = 0;
for (size_t i = 0; i < files.size() && files[i]; i++) {
sum += files[i]->fd.GetFileSize();
}
return sum;
}
// TODO(hx235): consider making this function part of the construction so we
// don't forget to call it
void Compaction::FinalizeInputInfo(Version* _input_version) {
input_version_ = _input_version;
cfd_ = input_version_->cfd();
cfd_->Ref();
input_version_->Ref();
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
edit_.SetColumnFamily(cfd_->GetID());
}
void Compaction::GetBoundaryKeys(
VersionStorageInfo* vstorage,
const std::vector<CompactionInputFiles>& inputs, Slice* smallest_user_key,
Slice* largest_user_key, int exclude_level) {
bool initialized = false;
const Comparator* ucmp = vstorage->InternalComparator()->user_comparator();
for (size_t i = 0; i < inputs.size(); ++i) {
if (inputs[i].files.empty() || inputs[i].level == exclude_level) {
continue;
}
if (inputs[i].level == 0) {
// we need to consider all files on level 0
for (const auto* f : inputs[i].files) {
const Slice& start_user_key = f->smallest.user_key();
if (!initialized ||
ucmp->Compare(start_user_key, *smallest_user_key) < 0) {
*smallest_user_key = start_user_key;
}
const Slice& end_user_key = f->largest.user_key();
if (!initialized ||
ucmp->Compare(end_user_key, *largest_user_key) > 0) {
*largest_user_key = end_user_key;
}
initialized = true;
}
} else {
// we only need to consider the first and last file
const Slice& start_user_key = inputs[i].files[0]->smallest.user_key();
if (!initialized ||
ucmp->Compare(start_user_key, *smallest_user_key) < 0) {
*smallest_user_key = start_user_key;
}
const Slice& end_user_key = inputs[i].files.back()->largest.user_key();
if (!initialized || ucmp->Compare(end_user_key, *largest_user_key) > 0) {
*largest_user_key = end_user_key;
}
initialized = true;
}
}
}
void Compaction::GetBoundaryInternalKeys(
VersionStorageInfo* vstorage,
const std::vector<CompactionInputFiles>& inputs, InternalKey* smallest_key,
InternalKey* largest_key, int exclude_level) {
bool initialized = false;
const InternalKeyComparator* icmp = vstorage->InternalComparator();
for (size_t i = 0; i < inputs.size(); ++i) {
if (inputs[i].files.empty() || inputs[i].level == exclude_level) {
continue;
}
if (inputs[i].level == 0) {
// we need to consider all files on level 0
for (const auto* f : inputs[i].files) {
if (!initialized || icmp->Compare(f->smallest, *smallest_key) < 0) {
*smallest_key = f->smallest;
}
if (!initialized || icmp->Compare(f->largest, *largest_key) > 0) {
*largest_key = f->largest;
}
initialized = true;
}
} else {
// we only need to consider the first and last file
if (!initialized ||
icmp->Compare(inputs[i].files[0]->smallest, *smallest_key) < 0) {
*smallest_key = inputs[i].files[0]->smallest;
}
if (!initialized ||
icmp->Compare(inputs[i].files.back()->largest, *largest_key) > 0) {
*largest_key = inputs[i].files.back()->largest;
}
initialized = true;
}
}
}
std::vector<CompactionInputFiles> Compaction::PopulateWithAtomicBoundaries(
VersionStorageInfo* vstorage, std::vector<CompactionInputFiles> inputs) {
const Comparator* ucmp = vstorage->InternalComparator()->user_comparator();
for (size_t i = 0; i < inputs.size(); i++) {
if (inputs[i].level == 0 || inputs[i].files.empty()) {
continue;
}
inputs[i].atomic_compaction_unit_boundaries.reserve(inputs[i].files.size());
AtomicCompactionUnitBoundary cur_boundary;
size_t first_atomic_idx = 0;
auto add_unit_boundary = [&](size_t to) {
if (first_atomic_idx == to) {
return;
}
for (size_t k = first_atomic_idx; k < to; k++) {
inputs[i].atomic_compaction_unit_boundaries.push_back(cur_boundary);
}
first_atomic_idx = to;
};
for (size_t j = 0; j < inputs[i].files.size(); j++) {
const auto* f = inputs[i].files[j];
if (j == 0) {
// First file in a level.
cur_boundary.smallest = &f->smallest;
cur_boundary.largest = &f->largest;
} else if (sstableKeyCompare(ucmp, *cur_boundary.largest, f->smallest) ==
0) {
// SSTs overlap but the end key of the previous file was not
// artificially extended by a range tombstone. Extend the current
// boundary.
cur_boundary.largest = &f->largest;
} else {
// Atomic compaction unit has ended.
add_unit_boundary(j);
cur_boundary.smallest = &f->smallest;
cur_boundary.largest = &f->largest;
}
}
add_unit_boundary(inputs[i].files.size());
assert(inputs[i].files.size() ==
inputs[i].atomic_compaction_unit_boundaries.size());
}
return inputs;
}
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
// helper function to determine if compaction is creating files at the
// bottommost level
bool Compaction::IsBottommostLevel(
int output_level, VersionStorageInfo* vstorage,
const std::vector<CompactionInputFiles>& inputs) {
single-file bottom-level compaction when snapshot released Summary: When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys. - Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys. - Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases. - Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called. - Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction. Closes https://github.com/facebook/rocksdb/pull/3009 Differential Revision: D6062044 Pulled By: ajkr fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
2017-10-25 23:24:29 +00:00
int output_l0_idx;
if (output_level == 0) {
output_l0_idx = 0;
for (const auto* file : vstorage->LevelFiles(0)) {
if (inputs[0].files.back() == file) {
break;
}
++output_l0_idx;
}
assert(static_cast<size_t>(output_l0_idx) < vstorage->LevelFiles(0).size());
} else {
output_l0_idx = -1;
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
}
Slice smallest_key, largest_key;
GetBoundaryKeys(vstorage, inputs, &smallest_key, &largest_key);
single-file bottom-level compaction when snapshot released Summary: When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys. - Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys. - Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases. - Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called. - Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction. Closes https://github.com/facebook/rocksdb/pull/3009 Differential Revision: D6062044 Pulled By: ajkr fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
2017-10-25 23:24:29 +00:00
return !vstorage->RangeMightExistAfterSortedRun(smallest_key, largest_key,
output_level, output_l0_idx);
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
}
// test function to validate the functionality of IsBottommostLevel()
// function -- determines if compaction with inputs and storage is bottommost
bool Compaction::TEST_IsBottommostLevel(
int output_level, VersionStorageInfo* vstorage,
const std::vector<CompactionInputFiles>& inputs) {
return IsBottommostLevel(output_level, vstorage, inputs);
}
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
bool Compaction::IsFullCompaction(
VersionStorageInfo* vstorage,
const std::vector<CompactionInputFiles>& inputs) {
size_t num_files_in_compaction = 0;
size_t total_num_files = 0;
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
for (int l = 0; l < vstorage->num_levels(); l++) {
total_num_files += vstorage->NumLevelFiles(l);
}
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
for (size_t i = 0; i < inputs.size(); i++) {
num_files_in_compaction += inputs[i].size();
}
return num_files_in_compaction == total_num_files;
}
Expose more info about input files in `CompactionFilter::Context` (#11857) Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier - Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_` - Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties` - Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other (2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857 Test Plan: - Modify existing UT ` TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics Reviewed By: ajkr Differential Revision: D49402540 Pulled By: hx235 fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
2023-09-20 20:34:39 +00:00
Status Compaction::InitInputTableProperties() {
if (!input_table_properties_.empty()) {
return Status::OK();
}
Status s;
const ReadOptions read_options(Env::IOActivity::kCompaction);
assert(input_version_);
for (size_t i = 0; i < num_input_levels(); ++i) {
for (const FileMetaData* fmd : *(this->inputs(i))) {
std::shared_ptr<const TableProperties> tp;
std::string file_name =
TableFileName(immutable_options_.cf_paths, fmd->fd.GetNumber(),
fmd->fd.GetPathId());
s = input_version_->GetTableProperties(read_options, &tp, fmd,
&file_name);
if (s.ok()) {
input_table_properties_[file_name] = tp;
} else {
ROCKS_LOG_ERROR(immutable_options_.info_log,
"Unable to load table properties for file %" PRIu64
" --- %s\n",
fmd->fd.GetNumber(), s.ToString().c_str());
input_table_properties_.clear();
return s;
Compare the number of input keys and processed keys for compactions (#11571) Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
2023-07-28 16:47:31 +00:00
}
}
Expose more info about input files in `CompactionFilter::Context` (#11857) Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier - Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_` - Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties` - Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other (2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857 Test Plan: - Modify existing UT ` TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics Reviewed By: ajkr Differential Revision: D49402540 Pulled By: hx235 fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
2023-09-20 20:34:39 +00:00
}
Compare the number of input keys and processed keys for compactions (#11571) Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
2023-07-28 16:47:31 +00:00
Expose more info about input files in `CompactionFilter::Context` (#11857) Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier - Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_` - Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties` - Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other (2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857 Test Plan: - Modify existing UT ` TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics Reviewed By: ajkr Differential Revision: D49402540 Pulled By: hx235 fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
2023-09-20 20:34:39 +00:00
return s;
Compare the number of input keys and processed keys for compactions (#11571) Summary: ... to improve data integrity validation during compaction. A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed. For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code. For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571 Test Plan: * Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case. * All other unit tests for non-corrupted case. * Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple` Reviewed By: ajkr Differential Revision: D47131965 Pulled By: cbi42 fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
2023-07-28 16:47:31 +00:00
}
Compaction::Compaction(
VersionStorageInfo* vstorage, const ImmutableOptions& _immutable_options,
const MutableCFOptions& _mutable_cf_options,
const MutableDBOptions& _mutable_db_options,
std::vector<CompactionInputFiles> _inputs, int _output_level,
uint64_t _target_file_size, uint64_t _max_compaction_bytes,
uint32_t _output_path_id, CompressionType _compression,
CompressionOptions _compression_opts, Temperature _output_temperature,
uint32_t _max_subcompactions, std::vector<FileMetaData*> _grandparents,
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
std::optional<SequenceNumber> _earliest_snapshot,
const SnapshotChecker* _snapshot_checker, bool _manual_compaction,
const std::string& _trim_ts, double _score, bool _deletion_compaction,
bool l0_files_might_overlap, CompactionReason _compaction_reason,
BlobGarbageCollectionPolicy _blob_garbage_collection_policy,
double _blob_garbage_collection_age_cutoff)
: input_vstorage_(vstorage),
start_level_(_inputs[0].level),
output_level_(_output_level),
Align compaction output file boundaries to the next level ones (#10655) Summary: Try to align the compaction output file boundaries to the next level ones (grandparent level), to reduce the level compaction write-amplification. In level compaction, there are "wasted" data at the beginning and end of the output level files. Align the file boundary can avoid such "wasted" compaction. With this PR, it tries to align the non-bottommost level file boundaries to its next level ones. It may cut file when the file size is large enough (at least 50% of target_file_size) and not too large (2x target_file_size). db_bench shows about 12.56% compaction reduction: ``` TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432 # baseline: Flush(GB): cumulative 25.882, interval 7.216 Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds # with this change: Flush(GB): cumulative 25.882, interval 7.753 Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds ``` The compaction simulator shows a similar result (14% with 100G random data). As a side effect, with this PR, the SST file size can exceed the target_file_size, but is capped at 2x target_file_size. And there will be smaller files. Here are file size statistics when loading 100GB with the target file size 32MB: ``` baseline this_PR count 1.656000e+03 1.705000e+03 mean 3.116062e+07 3.028076e+07 std 7.145242e+06 8.046139e+06 ``` The feature is enabled by default, to revert to the old behavior disable it with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false` Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for use case like user adding 2 or more non-overlapping data range at the same time, it can reduce the overlapping of 2 datasets in the lower levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655 Reviewed By: cbi42 Differential Revision: D39552321 Pulled By: jay-zhuang fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
2022-09-30 02:43:55 +00:00
target_output_file_size_(_target_file_size),
max_compaction_bytes_(_max_compaction_bytes),
max_subcompactions_(_max_subcompactions),
immutable_options_(_immutable_options),
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
mutable_cf_options_(_mutable_cf_options),
input_version_(nullptr),
number_levels_(vstorage->num_levels()),
cfd_(nullptr),
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
output_path_id_(_output_path_id),
output_compression_(_compression),
output_compression_opts_(_compression_opts),
output_temperature_(_output_temperature),
deletion_compaction_(_deletion_compaction),
l0_files_might_overlap_(l0_files_might_overlap),
inputs_(PopulateWithAtomicBoundaries(vstorage, std::move(_inputs))),
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
grandparents_(std::move(_grandparents)),
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
earliest_snapshot_(_earliest_snapshot),
snapshot_checker_(_snapshot_checker),
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
score_(_score),
Add missing range conflict check between file ingestion and RefitLevel() (#10988) Summary: **Context:** File ingestion never checks whether the key range it acts on overlaps with an ongoing RefitLevel() (used in `CompactRange()` with `change_level=true`). That's because RefitLevel() doesn't register and make its key range known to file ingestion. Though it checks overlapping with other compactions by https://github.com/facebook/rocksdb/blob/7.8.fb/db/external_sst_file_ingestion_job.cc#L998. RefitLevel() (used in `CompactRange()` with `change_level=true`) doesn't check whether the key range it acts on overlaps with an ongoing file ingestion. That's because file ingestion does not register and make its key range known to other compactions. - Note that non-refitlevel-compaction (e.g, manual compaction w/o RefitLevel() or general compaction) also does not check key range overlap with ongoing file ingestion for the same reason. - But it's fine. Credited to cbi42's discovery, `WaitForIngestFile` was called by background and foreground compactions. They were introduced in https://github.com/facebook/rocksdb/commit/0f88160f67d36ea30e3aca3a3cef924c3a009be6, https://github.com/facebook/rocksdb/commit/5c64fb67d2fc198f1a73ff3ae543749a6a41f513 and https://github.com/facebook/rocksdb/commit/87dfc1d23e0e16ff73e15f63c6fa0fb3b3fc8c8c. - Regardless, this PR registers file ingestion like a compaction is a general approach that will also add range conflict check between file ingestion and non-refitlevel-compaction, though it has not been the issue motivated this PR. Above are bugs resulting in two bad consequences: - If file ingestion and RefitLevel() creates files in the same level, then range-overlapped files will be created at that level and caught as corruption by `force_consistency_checks=true` - If file ingestion and RefitLevel() creates file in different levels, then with one further compaction on the ingested file, it can result in two same keys both with seqno 0 in two different levels. Then with iterator's [optimization](https://github.com/facebook/rocksdb/blame/c62f3221698fd273b673d4f7e54eabb8329a4369/db/db_iter.cc#L342-L343) that assumes no two same keys both with seqno 0, it will either break this assertion in debug build or, even worst, return value of this same key for the key after it, which is the wrong value to return, in release build. Therefore we decide to introduce range conflict check for file ingestion and RefitLevel() inspired from the existing range conflict check among compactions. **Summary:** - Treat file ingestion job and RefitLevel() as `Compaction` of new compaction reasons: `CompactionReason::kExternalSstIngestion` and `CompactionReason::kRefitLevel` and register/unregister them. File ingestion is treated as compaction from L0 to different levels and RefitLevel() as compaction from source level to target level. - Check for `RangeOverlapWithCompaction` with other ongoing compactions, `RegisterCompaction()` on this "compaction" before changing the LSM state in `VersionStorageInfo`, and `UnregisterCompaction()` after changing. - Replace scattered fixes (https://github.com/facebook/rocksdb/commit/0f88160f67d36ea30e3aca3a3cef924c3a009be6, https://github.com/facebook/rocksdb/commit/5c64fb67d2fc198f1a73ff3ae543749a6a41f513 and https://github.com/facebook/rocksdb/commit/87dfc1d23e0e16ff73e15f63c6fa0fb3b3fc8c8c.) that prevents overlapping between file ingestion and non-refit-level compaction with this fix cuz those practices are easy to overlook. - Misc: logic cleanup, see PR comments Pull Request resolved: https://github.com/facebook/rocksdb/pull/10988 Test Plan: - New unit test `DBCompactionTestWithOngoingFileIngestionParam*` that failed pre-fix and passed afterwards. - Made compatible with existing tests, see PR comments - make check - [Ongoing] Stress test rehearsal with normal value and aggressive CI value https://github.com/facebook/rocksdb/pull/10761 Reviewed By: cbi42 Differential Revision: D41535685 Pulled By: hx235 fbshipit-source-id: 549833a577ba1496d20a870583d4caa737da1258
2022-12-29 23:05:36 +00:00
bottommost_level_(
// For simplicity, we don't support the concept of "bottommost level"
// with
// `CompactionReason::kExternalSstIngestion` and
// `CompactionReason::kRefitLevel`
(_compaction_reason == CompactionReason::kExternalSstIngestion ||
_compaction_reason == CompactionReason::kRefitLevel)
? false
: IsBottommostLevel(output_level_, vstorage, inputs_)),
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
is_full_compaction_(IsFullCompaction(vstorage, inputs_)),
is_manual_compaction_(_manual_compaction),
trim_ts_(_trim_ts),
is_trivial_move_(false),
compaction_reason_(_compaction_reason),
notify_on_compaction_completion_(false),
enable_blob_garbage_collection_(
_blob_garbage_collection_policy == BlobGarbageCollectionPolicy::kForce
? true
: (_blob_garbage_collection_policy ==
BlobGarbageCollectionPolicy::kDisable
? false
: mutable_cf_options()->enable_blob_garbage_collection)),
blob_garbage_collection_age_cutoff_(
_blob_garbage_collection_age_cutoff < 0 ||
_blob_garbage_collection_age_cutoff > 1
? mutable_cf_options()->blob_garbage_collection_age_cutoff
: _blob_garbage_collection_age_cutoff),
Add missing range conflict check between file ingestion and RefitLevel() (#10988) Summary: **Context:** File ingestion never checks whether the key range it acts on overlaps with an ongoing RefitLevel() (used in `CompactRange()` with `change_level=true`). That's because RefitLevel() doesn't register and make its key range known to file ingestion. Though it checks overlapping with other compactions by https://github.com/facebook/rocksdb/blob/7.8.fb/db/external_sst_file_ingestion_job.cc#L998. RefitLevel() (used in `CompactRange()` with `change_level=true`) doesn't check whether the key range it acts on overlaps with an ongoing file ingestion. That's because file ingestion does not register and make its key range known to other compactions. - Note that non-refitlevel-compaction (e.g, manual compaction w/o RefitLevel() or general compaction) also does not check key range overlap with ongoing file ingestion for the same reason. - But it's fine. Credited to cbi42's discovery, `WaitForIngestFile` was called by background and foreground compactions. They were introduced in https://github.com/facebook/rocksdb/commit/0f88160f67d36ea30e3aca3a3cef924c3a009be6, https://github.com/facebook/rocksdb/commit/5c64fb67d2fc198f1a73ff3ae543749a6a41f513 and https://github.com/facebook/rocksdb/commit/87dfc1d23e0e16ff73e15f63c6fa0fb3b3fc8c8c. - Regardless, this PR registers file ingestion like a compaction is a general approach that will also add range conflict check between file ingestion and non-refitlevel-compaction, though it has not been the issue motivated this PR. Above are bugs resulting in two bad consequences: - If file ingestion and RefitLevel() creates files in the same level, then range-overlapped files will be created at that level and caught as corruption by `force_consistency_checks=true` - If file ingestion and RefitLevel() creates file in different levels, then with one further compaction on the ingested file, it can result in two same keys both with seqno 0 in two different levels. Then with iterator's [optimization](https://github.com/facebook/rocksdb/blame/c62f3221698fd273b673d4f7e54eabb8329a4369/db/db_iter.cc#L342-L343) that assumes no two same keys both with seqno 0, it will either break this assertion in debug build or, even worst, return value of this same key for the key after it, which is the wrong value to return, in release build. Therefore we decide to introduce range conflict check for file ingestion and RefitLevel() inspired from the existing range conflict check among compactions. **Summary:** - Treat file ingestion job and RefitLevel() as `Compaction` of new compaction reasons: `CompactionReason::kExternalSstIngestion` and `CompactionReason::kRefitLevel` and register/unregister them. File ingestion is treated as compaction from L0 to different levels and RefitLevel() as compaction from source level to target level. - Check for `RangeOverlapWithCompaction` with other ongoing compactions, `RegisterCompaction()` on this "compaction" before changing the LSM state in `VersionStorageInfo`, and `UnregisterCompaction()` after changing. - Replace scattered fixes (https://github.com/facebook/rocksdb/commit/0f88160f67d36ea30e3aca3a3cef924c3a009be6, https://github.com/facebook/rocksdb/commit/5c64fb67d2fc198f1a73ff3ae543749a6a41f513 and https://github.com/facebook/rocksdb/commit/87dfc1d23e0e16ff73e15f63c6fa0fb3b3fc8c8c.) that prevents overlapping between file ingestion and non-refit-level compaction with this fix cuz those practices are easy to overlook. - Misc: logic cleanup, see PR comments Pull Request resolved: https://github.com/facebook/rocksdb/pull/10988 Test Plan: - New unit test `DBCompactionTestWithOngoingFileIngestionParam*` that failed pre-fix and passed afterwards. - Made compatible with existing tests, see PR comments - make check - [Ongoing] Stress test rehearsal with normal value and aggressive CI value https://github.com/facebook/rocksdb/pull/10761 Reviewed By: cbi42 Differential Revision: D41535685 Pulled By: hx235 fbshipit-source-id: 549833a577ba1496d20a870583d4caa737da1258
2022-12-29 23:05:36 +00:00
penultimate_level_(
// For simplicity, we don't support the concept of "penultimate level"
// with `CompactionReason::kExternalSstIngestion` and
// `CompactionReason::kRefitLevel`
_compaction_reason == CompactionReason::kExternalSstIngestion ||
_compaction_reason == CompactionReason::kRefitLevel
? Compaction::kInvalidLevel
: EvaluatePenultimateLevel(vstorage, immutable_options_,
start_level_, output_level_)) {
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
MarkFilesBeingCompacted(true);
if (is_manual_compaction_) {
compaction_reason_ = CompactionReason::kManualCompaction;
}
if (max_subcompactions_ == 0) {
max_subcompactions_ = _mutable_db_options.max_subcompactions;
}
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
Align compaction output file boundaries to the next level ones (#10655) Summary: Try to align the compaction output file boundaries to the next level ones (grandparent level), to reduce the level compaction write-amplification. In level compaction, there are "wasted" data at the beginning and end of the output level files. Align the file boundary can avoid such "wasted" compaction. With this PR, it tries to align the non-bottommost level file boundaries to its next level ones. It may cut file when the file size is large enough (at least 50% of target_file_size) and not too large (2x target_file_size). db_bench shows about 12.56% compaction reduction: ``` TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432 # baseline: Flush(GB): cumulative 25.882, interval 7.216 Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds # with this change: Flush(GB): cumulative 25.882, interval 7.753 Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds ``` The compaction simulator shows a similar result (14% with 100G random data). As a side effect, with this PR, the SST file size can exceed the target_file_size, but is capped at 2x target_file_size. And there will be smaller files. Here are file size statistics when loading 100GB with the target file size 32MB: ``` baseline this_PR count 1.656000e+03 1.705000e+03 mean 3.116062e+07 3.028076e+07 std 7.145242e+06 8.046139e+06 ``` The feature is enabled by default, to revert to the old behavior disable it with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false` Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for use case like user adding 2 or more non-overlapping data range at the same time, it can reduce the overlapping of 2 datasets in the lower levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655 Reviewed By: cbi42 Differential Revision: D39552321 Pulled By: jay-zhuang fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
2022-09-30 02:43:55 +00:00
// for the non-bottommost levels, it tries to build files match the target
// file size, but not guaranteed. It could be 2x the size of the target size.
max_output_file_size_ = bottommost_level_ || grandparents_.empty()
? target_output_file_size_
: 2 * target_output_file_size_;
Align compaction output file boundaries to the next level ones (#10655) Summary: Try to align the compaction output file boundaries to the next level ones (grandparent level), to reduce the level compaction write-amplification. In level compaction, there are "wasted" data at the beginning and end of the output level files. Align the file boundary can avoid such "wasted" compaction. With this PR, it tries to align the non-bottommost level file boundaries to its next level ones. It may cut file when the file size is large enough (at least 50% of target_file_size) and not too large (2x target_file_size). db_bench shows about 12.56% compaction reduction: ``` TEST_TMPDIR=/data/dbbench2 ./db_bench --benchmarks=fillrandom,readrandom -max_background_jobs=12 -num=400000000 -target_file_size_base=33554432 # baseline: Flush(GB): cumulative 25.882, interval 7.216 Cumulative compaction: 285.90 GB write, 162.36 MB/s write, 269.68 GB read, 153.15 MB/s read, 2926.7 seconds # with this change: Flush(GB): cumulative 25.882, interval 7.753 Cumulative compaction: 249.97 GB write, 141.96 MB/s write, 233.74 GB read, 132.74 MB/s read, 2534.9 seconds ``` The compaction simulator shows a similar result (14% with 100G random data). As a side effect, with this PR, the SST file size can exceed the target_file_size, but is capped at 2x target_file_size. And there will be smaller files. Here are file size statistics when loading 100GB with the target file size 32MB: ``` baseline this_PR count 1.656000e+03 1.705000e+03 mean 3.116062e+07 3.028076e+07 std 7.145242e+06 8.046139e+06 ``` The feature is enabled by default, to revert to the old behavior disable it with `AdvancedColumnFamilyOptions.level_compaction_dynamic_file_size = false` Also includes https://github.com/facebook/rocksdb/issues/1963 to cut file before skippable grandparent file. Which is for use case like user adding 2 or more non-overlapping data range at the same time, it can reduce the overlapping of 2 datasets in the lower levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10655 Reviewed By: cbi42 Differential Revision: D39552321 Pulled By: jay-zhuang fbshipit-source-id: 640d15f159ab0cd973f2426cfc3af266fc8bdde2
2022-09-30 02:43:55 +00:00
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
#ifndef NDEBUG
for (size_t i = 1; i < inputs_.size(); ++i) {
assert(inputs_[i].level > inputs_[i - 1].level);
}
#endif
// setup input_levels_
{
input_levels_.resize(num_input_levels());
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
if (earliest_snapshot_.has_value()) {
FilterInputsForCompactionIterator();
} else {
for (size_t which = 0; which < num_input_levels(); which++) {
DoGenerateLevelFilesBrief(&input_levels_[which], inputs_[which].files,
&arena_);
}
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
}
}
GetBoundaryKeys(vstorage, inputs_, &smallest_user_key_, &largest_user_key_);
// Every compaction regardless of any compaction reason may respect the
// existing compact cursor in the output level to split output files
output_split_key_ = nullptr;
if (immutable_options_.compaction_style == kCompactionStyleLevel &&
immutable_options_.compaction_pri == kRoundRobin) {
const InternalKey* cursor =
&input_vstorage_->GetCompactCursors()[output_level_];
if (cursor->size() != 0) {
const Slice& cursor_user_key = ExtractUserKey(cursor->Encode());
auto ucmp = vstorage->InternalComparator()->user_comparator();
// May split output files according to the cursor if it in the user-key
// range
if (ucmp->CompareWithoutTimestamp(cursor_user_key, smallest_user_key_) >
0 &&
ucmp->CompareWithoutTimestamp(cursor_user_key, largest_user_key_) <=
0) {
output_split_key_ = cursor;
}
}
}
PopulatePenultimateLevelOutputRange();
}
void Compaction::PopulatePenultimateLevelOutputRange() {
if (!SupportsPerKeyPlacement()) {
return;
}
// exclude the last level, the range of all input levels is the safe range
// of keys that can be moved up.
int exclude_level = number_levels_ - 1;
penultimate_output_range_type_ = PenultimateOutputRangeType::kNonLastRange;
// For universal compaction, the penultimate_output_range could be extended if
// all penultimate level files are included in the compaction (which includes
// the case that the penultimate level is empty).
if (immutable_options_.compaction_style == kCompactionStyleUniversal) {
exclude_level = kInvalidLevel;
penultimate_output_range_type_ = PenultimateOutputRangeType::kFullRange;
std::set<uint64_t> penultimate_inputs;
for (const auto& input_lvl : inputs_) {
if (input_lvl.level == penultimate_level_) {
for (const auto& file : input_lvl.files) {
penultimate_inputs.emplace(file->fd.GetNumber());
}
}
}
auto penultimate_files = input_vstorage_->LevelFiles(penultimate_level_);
for (const auto& file : penultimate_files) {
if (penultimate_inputs.find(file->fd.GetNumber()) ==
penultimate_inputs.end()) {
exclude_level = number_levels_ - 1;
penultimate_output_range_type_ =
PenultimateOutputRangeType::kNonLastRange;
break;
}
}
}
// FIXME: should make use of `penultimate_output_range_type_`.
// FIXME: when last level's input range does not overlap with
// penultimate level, and penultimate level input is empty,
// this call will not set penultimate_level_smallest_ or
// penultimate_level_largest_. No keys will be compacted up.
GetBoundaryInternalKeys(input_vstorage_, inputs_,
&penultimate_level_smallest_,
&penultimate_level_largest_, exclude_level);
}
Compaction::~Compaction() {
if (input_version_ != nullptr) {
input_version_->Unref();
}
if (cfd_ != nullptr) {
cfd_->UnrefAndTryDelete();
}
}
bool Compaction::SupportsPerKeyPlacement() const {
return penultimate_level_ != kInvalidLevel;
}
int Compaction::GetPenultimateLevel() const { return penultimate_level_; }
// smallest_key and largest_key include timestamps if user-defined timestamp is
// enabled.
bool Compaction::OverlapPenultimateLevelOutputRange(
const Slice& smallest_key, const Slice& largest_key) const {
if (!SupportsPerKeyPlacement()) {
return false;
}
// See FIXME in Compaction::PopulatePenultimateLevelOutputRange().
// We do not compact any key up in this case.
if (penultimate_level_smallest_.size() == 0 ||
penultimate_level_largest_.size() == 0) {
return false;
}
const Comparator* ucmp =
input_vstorage_->InternalComparator()->user_comparator();
return ucmp->CompareWithoutTimestamp(
smallest_key, penultimate_level_largest_.user_key()) <= 0 &&
ucmp->CompareWithoutTimestamp(
largest_key, penultimate_level_smallest_.user_key()) >= 0;
}
// key includes timestamp if user-defined timestamp is enabled.
bool Compaction::WithinPenultimateLevelOutputRange(
const ParsedInternalKey& ikey) const {
if (!SupportsPerKeyPlacement()) {
return false;
}
if (penultimate_level_smallest_.size() == 0 ||
penultimate_level_largest_.size() == 0) {
return false;
}
const InternalKeyComparator* icmp = input_vstorage_->InternalComparator();
// op_type of a key can change during compaction, e.g. Merge -> Put.
return icmp->CompareKeySeq(ikey, penultimate_level_smallest_.Encode()) >= 0 &&
icmp->CompareKeySeq(ikey, penultimate_level_largest_.Encode()) <= 0;
}
bool Compaction::InputCompressionMatchesOutput() const {
int base_level = input_vstorage_->base_level();
bool matches =
(GetCompressionType(input_vstorage_, mutable_cf_options_, start_level_,
base_level) == output_compression_);
if (matches) {
TEST_SYNC_POINT("Compaction::InputCompressionMatchesOutput:Matches");
return true;
}
TEST_SYNC_POINT("Compaction::InputCompressionMatchesOutput:DidntMatch");
Allow GetThreadList() to report basic compaction operation properties. Summary: Now we're able to show more details about a compaction in GetThreadList() :) This patch allows GetThreadList() to report basic compaction operation properties. Basic compaction properties include: 1. job id 2. compaction input / output level 3. compaction property flags (is_manual, is_deletion, .. etc) 4. total input bytes 5. the number of bytes has been read currently. 6. the number of bytes has been written currently. Flush operation properties will be done in a seperate diff. Test Plan: /db_bench --threads=30 --num=1000000 --benchmarks=fillrandom --thread_status_per_interval=1 Sample output of tracking same job: ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties 140664171987072 Low Pri default Compaction 31.357 ms CompactionJob::FinishCompactionOutputFile BaseInputLevel 1 | BytesRead 2264663 | BytesWritten 1934241 | IsDeletion 0 | IsManual 0 | IsTrivialMove 0 | JobID 277 | OutputLevel 2 | TotalInputBytes 3964158 | ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties 140664171987072 Low Pri default Compaction 59.440 ms CompactionJob::FinishCompactionOutputFile BaseInputLevel 1 | BytesRead 2264663 | BytesWritten 1934241 | IsDeletion 0 | IsManual 0 | IsTrivialMove 0 | JobID 277 | OutputLevel 2 | TotalInputBytes 3964158 | ThreadID ThreadType cfName Operation ElapsedTime Stage State OperationProperties 140664171987072 Low Pri default Compaction 226.375 ms CompactionJob::Install BaseInputLevel 1 | BytesRead 3958013 | BytesWritten 3621940 | IsDeletion 0 | IsManual 0 | IsTrivialMove 0 | JobID 277 | OutputLevel 2 | TotalInputBytes 3964158 | Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37653
2015-05-07 05:50:35 +00:00
return matches;
}
bool Compaction::IsTrivialMove() const {
// Avoid a move if there is lots of overlapping grandparent data.
// Otherwise, the move could create a parent file that will require
// a very expensive merge later on.
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
// If start_level_== output_level_, the purpose is to force compaction
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
// filter to be applied to that level, and thus cannot be a trivial move.
// Check if start level have files with overlapping ranges
if (start_level_ == 0 && input_vstorage_->level0_non_overlapping() == false &&
l0_files_might_overlap_) {
// We cannot move files from L0 to L1 if the L0 files in the LSM-tree are
// overlapping, unless we are sure that files picked in L0 don't overlap.
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
return false;
}
if (is_manual_compaction_ &&
(immutable_options_.compaction_filter != nullptr ||
immutable_options_.compaction_filter_factory != nullptr)) {
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
// This is a manual compaction and we have a compaction filter that should
// be executed, we cannot do a trivial move
return false;
}
if (start_level_ == output_level_) {
// It doesn't make sense if compaction picker picks files just to trivial
// move to the same level.
return false;
}
if (compaction_reason_ == CompactionReason::kChangeTemperature) {
// Changing temperature usually requires rewriting the file.
return false;
}
// Used in universal compaction, where trivial move can be done if the
// input files are non overlapping
if ((mutable_cf_options_.compaction_options_universal.allow_trivial_move) &&
Fixes #9565 (#9586) Summary: [Compaction::IsTrivialMove](https://github.com/facebook/rocksdb/blob/a2b9be42b6d5ac4d44bcc6a9451a825440000769/db/compaction/compaction.cc#L318) checks whether allow_trivial_move is set, and if so it returns the value of is_trivial_move_. The allow_trivial_move option is there for universal compaction. So when this is set and leveled compaction is enabled, then useful code that follows this block never gets a chance to run. A check that [compaction_style == kCompactionStyleUniversal](https://github.com/facebook/rocksdb/blob/320d9a8e8a1b6998f92934f87fc71ad8bd6d4596/db/db_impl/db_impl_compaction_flush.cc#L1030) should be added to avoid doing the wrong thing for leveled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9586 Test Plan: To reproduce this: First edit db/compaction/compaction.cc with ``` diff --git a/db/compaction/compaction.cc b/db/compaction/compaction.cc index 7ae50b91e..52dd489b1 100644 --- a/db/compaction/compaction.cc +++ b/db/compaction/compaction.cc @@ -319,6 +319,8 @@ bool Compaction::IsTrivialMove() const { // input files are non overlapping if ((mutable_cf_options_.compaction_options_universal.allow_trivial_move) && (output_level_ != 0)) { + printf("IsTrivialMove:: return %d because universal allow_trivial_move\n", (int) is_trivial_move_); + // abort(); return is_trivial_move_; } ``` And then run ``` ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/m/rx --wal_dir=/data/m/rx --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --seed=1641328309 --universal_allow_trivial_move=1 ``` Example output with the debug code added ``` IsTrivialMove:: return 0 because universal allow_trivial_move IsTrivialMove:: return 0 because universal allow_trivial_move ``` After this PR, the bug is fixed. Reviewed By: ajkr Differential Revision: D34350451 Pulled By: gitbw95 fbshipit-source-id: 3232005cc47c40a7e75d316cfc7960beb5bdff3a
2022-02-18 22:10:25 +00:00
(output_level_ != 0) &&
(cfd_->ioptions()->compaction_style == kCompactionStyleUniversal)) {
return is_trivial_move_;
}
if (!(start_level_ != output_level_ && num_input_levels() == 1 &&
input(0, 0)->fd.GetPathId() == output_path_id() &&
InputCompressionMatchesOutput())) {
return false;
}
// assert inputs_.size() == 1
if (output_level_ + 1 < number_levels_) {
std::unique_ptr<SstPartitioner> partitioner = CreateSstPartitioner();
for (const auto& file : inputs_.front().files) {
std::vector<FileMetaData*> file_grand_parents;
input_vstorage_->GetOverlappingInputs(output_level_ + 1, &file->smallest,
&file->largest,
&file_grand_parents);
const auto compaction_size =
file->fd.GetFileSize() + TotalFileSize(file_grand_parents);
if (compaction_size > max_compaction_bytes_) {
return false;
}
if (partitioner.get() != nullptr) {
if (!partitioner->CanDoTrivialMove(file->smallest.user_key(),
file->largest.user_key())) {
return false;
}
}
}
}
// PerKeyPlacement compaction should never be trivial move.
if (SupportsPerKeyPlacement()) {
return false;
}
return true;
}
void Compaction::AddInputDeletions(VersionEdit* out_edit) {
for (size_t which = 0; which < num_input_levels(); which++) {
for (size_t i = 0; i < inputs_[which].size(); i++) {
out_edit->DeleteFile(level(which), inputs_[which][i]->fd.GetNumber());
}
}
}
bool Compaction::KeyNotExistsBeyondOutputLevel(
const Slice& user_key, std::vector<size_t>* level_ptrs) const {
assert(input_version_ != nullptr);
assert(level_ptrs != nullptr);
assert(level_ptrs->size() == static_cast<size_t>(number_levels_));
if (bottommost_level_) {
return true;
} else if (output_level_ != 0 &&
cfd_->ioptions()->compaction_style == kCompactionStyleLevel) {
// Maybe use binary search to find right entry instead of linear search?
const Comparator* user_cmp = cfd_->user_comparator();
for (int lvl = output_level_ + 1; lvl < number_levels_; lvl++) {
const std::vector<FileMetaData*>& files =
input_vstorage_->LevelFiles(lvl);
for (; level_ptrs->at(lvl) < files.size(); level_ptrs->at(lvl)++) {
auto* f = files[level_ptrs->at(lvl)];
if (user_cmp->Compare(user_key, f->largest.user_key()) <= 0) {
// We've advanced far enough
Allow compaction iterator to perform garbage collection (#7556) Summary: Add a threshold timestamp, full_history_ts_low_ of type `std::string*` to `CompactionIterator`, so that RocksDB can also perform garbage collection during compaction. * If full_history_ts_low_ is nullptr, then compaction iterator does not perform GC, preserving all timestamp history for all keys. Compaction iterator will treat user key with different timestamps as different user keys. * If full_history_ts_low_ is not nullptr, then compaction iterator performs GC. GC will look at keys older than `*full_history_ts_low_` and determine their eligibility based on factors including snapshots. Current rules of GC: * If an internal key is in the same snapshot as a previous counterpart with the same user key, and this key is eligible for GC, and the key is not single-delete or merge operand, then this key can be dropped. Note that the previous internal key cannot be a merge operand either. * If a tombstone is the most recent one in the earliest snapshot and it is eligible for GC, and keyNotExistsBeyondLevel() is true, then this tombstone can be dropped. * If a tombstone is the most recent one in a snapshot and it is eligible for GC, and the compaction is at bottommost level, then all other older internal keys of the same user key must also be eligible for GC, thus can be dropped * Single-delete, delete-range and merge are not currently supported. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7556 Test Plan: make check Reviewed By: ltamasi Differential Revision: D24507728 Pulled By: riversand963 fbshipit-source-id: 3c09c7301f41eed76dfcf4d1527e68cf6e0a8bb3
2020-10-24 05:58:05 +00:00
// In the presence of user-defined timestamp, we may need to handle
// the case in which f->smallest.user_key() (including ts) has the
// same user key, but the ts part is smaller. If so,
// Compare(user_key, f->smallest.user_key()) returns -1.
// That's why we need CompareWithoutTimestamp().
if (user_cmp->CompareWithoutTimestamp(user_key,
f->smallest.user_key()) >= 0) {
// Key falls in this file's range, so it may
// exist beyond output level
return false;
}
break;
}
}
}
return true;
}
return false;
}
bool Compaction::KeyRangeNotExistsBeyondOutputLevel(
const Slice& begin_key, const Slice& end_key,
std::vector<size_t>* level_ptrs) const {
assert(input_version_ != nullptr);
assert(level_ptrs != nullptr);
assert(level_ptrs->size() == static_cast<size_t>(number_levels_));
assert(cfd_->user_comparator()->CompareWithoutTimestamp(begin_key, end_key) <
0);
if (bottommost_level_) {
return true /* does not overlap */;
} else if (output_level_ != 0 &&
cfd_->ioptions()->compaction_style == kCompactionStyleLevel) {
const Comparator* user_cmp = cfd_->user_comparator();
for (int lvl = output_level_ + 1; lvl < number_levels_; lvl++) {
const std::vector<FileMetaData*>& files =
input_vstorage_->LevelFiles(lvl);
for (; level_ptrs->at(lvl) < files.size(); level_ptrs->at(lvl)++) {
auto* f = files[level_ptrs->at(lvl)];
// Advance until the first file with begin_key <= f->largest.user_key()
if (user_cmp->CompareWithoutTimestamp(begin_key,
f->largest.user_key()) > 0) {
continue;
}
// We know that the previous file prev_f, if exists, has
// prev_f->largest.user_key() < begin_key.
if (user_cmp->CompareWithoutTimestamp(end_key,
f->smallest.user_key()) <= 0) {
// not overlapping with this level
break;
} else {
// We have:
// - begin_key < end_key,
// - begin_key <= f->largest.user_key(), and
// - end_key > f->smallest.user_key()
return false /* overlap */;
}
}
}
return true /* does not overlap */;
}
return false /* overlaps */;
};
// Mark (or clear) each file that is being compacted
void Compaction::MarkFilesBeingCompacted(bool being_compacted) const {
for (size_t i = 0; i < num_input_levels(); i++) {
for (size_t j = 0; j < inputs_[i].size(); j++) {
assert(being_compacted != inputs_[i][j]->being_compacted);
inputs_[i][j]->being_compacted = being_compacted;
}
}
}
// Sample output:
// If compacting 3 L0 files, 2 L3 files and 1 L4 file, and outputting to L5,
// print: "3@0 + 2@3 + 1@4 files to L5"
const char* Compaction::InputLevelSummary(
InputLevelSummaryBuffer* scratch) const {
int len = 0;
bool is_first = true;
for (auto& input_level : inputs_) {
if (input_level.empty()) {
continue;
}
if (!is_first) {
len +=
snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len, " + ");
len = std::min(len, static_cast<int>(sizeof(scratch->buffer)));
} else {
is_first = false;
}
len += snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len,
"%" ROCKSDB_PRIszt "@%d", input_level.size(),
input_level.level);
len = std::min(len, static_cast<int>(sizeof(scratch->buffer)));
}
snprintf(scratch->buffer + len, sizeof(scratch->buffer) - len,
" files to L%d", output_level());
return scratch->buffer;
}
uint64_t Compaction::CalculateTotalInputSize() const {
uint64_t size = 0;
for (auto& input_level : inputs_) {
for (auto f : input_level.files) {
size += f->fd.GetFileSize();
}
}
return size;
}
void Compaction::ReleaseCompactionFiles(const Status& status) {
Make Compaction class easier to use Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
2015-04-10 22:01:54 +00:00
MarkFilesBeingCompacted(false);
cfd_->compaction_picker()->ReleaseCompactionFiles(this, status);
}
void Compaction::ResetNextCompactionIndex() {
assert(input_version_ != nullptr);
input_vstorage_->ResetNextCompactionIndex(start_level_);
}
namespace {
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
int InputSummary(const std::vector<FileMetaData*>& files,
const std::vector<bool>& files_filtered, char* output,
int len) {
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
assert(files_filtered.empty() || (files.size() == files_filtered.size()));
*output = '\0';
int write = 0;
for (size_t i = 0; i < files.size(); i++) {
int sz = len - write;
int ret;
char sztxt[16];
AppendHumanBytes(files.at(i)->fd.GetFileSize(), sztxt, 16);
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
if (files_filtered.empty()) {
ret = snprintf(output + write, sz, "%" PRIu64 "(%s) ",
files.at(i)->fd.GetNumber(), sztxt);
} else {
ret = snprintf(output + write, sz, "%" PRIu64 "(%s filtered:%s) ",
files.at(i)->fd.GetNumber(), sztxt,
files_filtered.at(i) ? "true" : "false");
}
if (ret < 0 || ret >= sz) {
break;
}
write += ret;
}
// if files.size() is non-zero, overwrite the last space
return write - !!files.size();
}
} // namespace
void Compaction::Summary(char* output, int len) {
int write =
snprintf(output, len, "Base version %" PRIu64 " Base level %d, inputs: [",
input_version_->GetVersionNumber(), start_level_);
if (write < 0 || write >= len) {
return;
}
for (size_t level_iter = 0; level_iter < num_input_levels(); ++level_iter) {
if (level_iter > 0) {
write += snprintf(output + write, len - write, "], [");
if (write < 0 || write >= len) {
return;
}
}
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
assert(non_start_level_input_files_filtered_.empty() ||
non_start_level_input_files_filtered_.size() == inputs_.size() - 1);
write += InputSummary(
inputs_[level_iter].files,
(level_iter == 0 || non_start_level_input_files_filtered_.empty())
? std::vector<bool>{}
: non_start_level_input_files_filtered_[level_iter - 1],
output + write, len - write);
if (write < 0 || write >= len) {
return;
}
}
snprintf(output + write, len - write, "]");
}
uint64_t Compaction::OutputFilePreallocationSize() const {
uint64_t preallocation_size = 0;
for (const auto& level_files : inputs_) {
for (const auto& file : level_files.files) {
preallocation_size += file->fd.GetFileSize();
}
}
if (max_output_file_size_ != std::numeric_limits<uint64_t>::max() &&
(immutable_options_.compaction_style == kCompactionStyleLevel ||
output_level() > 0)) {
preallocation_size = std::min(max_output_file_size_, preallocation_size);
}
// Over-estimate slightly so we don't end up just barely crossing
// the threshold
// No point to preallocate more than 1GB.
return std::min(uint64_t{1073741824},
preallocation_size + (preallocation_size / 10));
}
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
std::unique_ptr<CompactionFilter> Compaction::CreateCompactionFilter() const {
if (!cfd_->ioptions()->compaction_filter_factory) {
return nullptr;
}
if (!cfd_->ioptions()
->compaction_filter_factory->ShouldFilterTableFileCreation(
TableFileCreationReason::kCompaction)) {
return nullptr;
}
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
CompactionFilter::Context context;
context.is_full_compaction = is_full_compaction_;
context.is_manual_compaction = is_manual_compaction_;
Expose more info about input files in `CompactionFilter::Context` (#11857) Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier - Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_` - Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties` - Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other (2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857 Test Plan: - Modify existing UT ` TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics Reviewed By: ajkr Differential Revision: D49402540 Pulled By: hx235 fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
2023-09-20 20:34:39 +00:00
context.input_start_level = start_level_;
context.column_family_id = cfd_->GetID();
context.reason = TableFileCreationReason::kCompaction;
Expose more info about input files in `CompactionFilter::Context` (#11857) Summary: **Context:** As requested, lowest level as well as a map from input file to its table properties among all input files used in table creation (if any) are exposed in `CompactionFilter::Context`. **Summary:** This PR contains two commits: (1) [Refactory](https://github.com/facebook/rocksdb/pull/11857/commits/0012777f0ee829fee859eec5db11a882f450ae26) to make resonating/using what is in `Compaction:: table_properties_` easier - Separate `Compaction:: table_properties_` into `Compaction:: input_table_properties_` and `Compaction:: output_table_properties_` - Separate the "set input table properties" logic into `Compaction:: SetInputTableProperties()`) from `Compaction:: GetInputTableProperties` - Call `Compaction:: SetInputTableProperties()` as soon as possible, which is right after `Compaction::SetInputVersion()`. Bundle these two functions into one `Compaction::FinalizeInputInfo()` to minimize missing one or the other (2) [Expose more info about input files:](https://github.com/facebook/rocksdb/pull/11857/commits/6093e7dfbadd4fe1d05ad8a6ab3452d363f6d131) `CompactionFilter::Context::input_start_level/input_table_properties` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11857 Test Plan: - Modify existing UT ` TEST_F(DBTestCompactionFilter, CompactionFilterContextManual)` to cover new logics Reviewed By: ajkr Differential Revision: D49402540 Pulled By: hx235 fbshipit-source-id: 469fff50fa0e5964ffa5ea8db0743f61438ea392
2023-09-20 20:34:39 +00:00
context.input_table_properties = GetInputTableProperties();
if (context.input_table_properties.empty()) {
ROCKS_LOG_WARN(
immutable_options_.info_log,
"Unable to set `input_table_properties` of `CompactionFilter::Context` "
"for compaction.");
}
Allowing L0 -> L1 trivial move on sorted data Summary: This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping The conditions for trivial move have been updated Introduced conditions: - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual) - Input level files cannot be overlapping Removed conditions: - Trivial move only run when the compaction is not manual - Input level should can contain only 1 file More context on what tests failed because of Trivial move ``` DBTest.CompactionsGenerateMultipleFiles This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1 ``` ``` DBTest.NoSpaceCompactRange This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation because trivial move does not need any extra space, and did not check for that ``` ``` DBTest.DropWrites Similar to DBTest.NoSpaceCompactRange ``` ``` DBTest.DeleteObsoleteFilesPendingOutputs This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3 ``` ``` CuckooTableDBTest.CompactionIntoMultipleFiles Same as DBTest.CompactionsGenerateMultipleFiles ``` This diff is based on a work by @sdong https://reviews.facebook.net/D34149 Test Plan: make -j64 check Reviewers: rven, sdong, igor Reviewed By: igor Subscribers: yhchiang, ott, march, dhruba, sdong Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 23:51:25 +00:00
return cfd_->ioptions()->compaction_filter_factory->CreateCompactionFilter(
context);
}
std::unique_ptr<SstPartitioner> Compaction::CreateSstPartitioner() const {
if (!immutable_options_.sst_partitioner_factory) {
return nullptr;
}
SstPartitioner::Context context;
context.is_full_compaction = is_full_compaction_;
context.is_manual_compaction = is_manual_compaction_;
context.output_level = output_level_;
context.smallest_user_key = smallest_user_key_;
context.largest_user_key = largest_user_key_;
return immutable_options_.sst_partitioner_factory->CreatePartitioner(context);
}
bool Compaction::IsOutputLevelEmpty() const {
return inputs_.back().level != output_level_ || inputs_.back().empty();
}
bool Compaction::ShouldFormSubcompactions() const {
Support subcmpct using reserved resources for round-robin priority (#10341) Summary: Earlier implementation of round-robin priority can only pick one file at a time and disallows parallel compactions within the same level. In this PR, round-robin compaction policy will expand towards more input files with respecting some additional constraints, which are summarized as follows: * Constraint 1: We can only pick consecutive files - Constraint 1a: When a file is being compacted (or some input files are being compacted after expanding), we cannot choose it and have to stop choosing more files - Constraint 1b: When we reach the last file (with the largest keys), we cannot choose more files (the next file will be the first one with small keys) * Constraint 2: We should ensure the total compaction bytes (including the overlapped files from the next level) is no more than `mutable_cf_options_.max_compaction_bytes` * Constraint 3: We try our best to pick as many files as possible so that the post-compaction level size can be just less than `MaxBytesForLevel(start_level_)` * Constraint 4: If trivial move is allowed, we reuse the logic of `TryNonL0TrivialMove()` instead of expanding files with Constraint 3 More details can be found in `LevelCompactionBuilder::SetupOtherFilesWithRoundRobinExpansion()`. The above optimization accelerates the process of moving the compaction cursor, in which the write-amp can be further reduced. While a large compaction may lead to high write stall, we break this large compaction into several subcompactions **regardless of** the `max_subcompactions` limit. The number of subcompactions for round-robin compaction priority is determined through the following steps: * Step 1: Initialized against `max_output_file_limit`, the number of input files in the start level, and also the range size limit `ranges.size()` * Step 2: Call `AcquireSubcompactionResources()`when max subcompactions is not sufficient, but we may or may not obtain desired resources, additional number of resources is stored in `extra_num_subcompaction_threads_reserved_`). Subcompaction limit is changed and update `num_planned_subcompactions` with `GetSubcompactionLimit()` * Step 3: Call `ShrinkSubcompactionResources()` to ensure extra resources can be released (extra resources may exist for round-robin compaction when the number of actual number of subcompactions is less than the number of planned subcompactions) More details can be found in `CompactionJob::AcquireSubcompactionResources()`,`CompactionJob::ShrinkSubcompactionResources()`, and `CompactionJob::ReleaseSubcompactionResources()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10341 Test Plan: Add `CompactionPriMultipleFilesRoundRobin[1-3]` unit test in `compaction_picker_test.cc` and `RoundRobinSubcompactionsAgainstResources.SubcompactionsUsingResources/[0-4]`, `RoundRobinSubcompactionsAgainstPressureToken.PressureTokenTest/[0-1]` in `db_compaction_test.cc` Reviewed By: ajkr, hx235 Differential Revision: D37792644 Pulled By: littlepig2013 fbshipit-source-id: 7fecb7c4ffd97b34bbf6e3b760b2c35a772a0657
2022-07-24 18:12:44 +00:00
if (cfd_ == nullptr) {
return false;
}
Refactor `table_factory` into MutableCFOptions (#13077) Summary: This is setting up for a fix to a data race in SetOptions on BlockBasedTableOptions (BBTO), https://github.com/facebook/rocksdb/issues/10079 The race will be fixed by replacing `table_factory` with a modified copy whenever we want to modify a BBTO field. An argument could be made that this change creates more entaglement between features (e.g. BlobSource <-> MutableCFOptions), rather than (conceptually) minimizing the dependencies of each feature, but * Most of these things already depended on ImmutableOptions * Historically there has been a lot of plumbing (and possible small CPU overhead) involved in adding features that need to reach a lot of places, like `block_protection_bytes_per_key`. Keeping those wrapped up in options simplifies that. * SuperVersion management generally takes care of lifetime management of MutableCFOptions, so is not that difficult. (Crash test agrees so far.) There are some FIXME places where it is known to be unsafe to replace `block_cache` unless/until we handle shared_ptr tracking properly. HOWEVER, replacing `block_cache` is generally dubious, at least while existing users of the old block cache (e.g. table readers) can continue indefinitely. The change to cf_options.cc is essentially just moving code (not changing). I'm not concerned about the performance of copying another shared_ptr with MutableCFOptions, but I left a note about considering an improvement if more shared_ptr are added to it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/13077 Test Plan: existing tests, crash test. Unit test DBOptionsTest.GetLatestCFOptions updated with some temporary logic. MemoryTest required some refactoring (simplification) for the change. Reviewed By: cbi42 Differential Revision: D64546903 Pulled By: pdillinger fbshipit-source-id: 69ae97ce5cf4c01b58edc4c5d4687eb1e5bf5855
2024-10-17 21:13:20 +00:00
if (mutable_cf_options_.table_factory->Name() ==
fix: Round-Robin pri under leveled compaction allows subcompactions b… (#12843) Summary: ### Summary: Round-Robin pri under leveled compaction allows subcompactions by default is not compatible with PlainTable ```c++ bool Compaction::ShouldFormSubcompactions() const { if (cfd_ == nullptr) { return false; } // Round-Robin pri under leveled compaction allows subcompactions by default // and the number of subcompactions can be larger than max_subcompactions_ if (cfd_->ioptions()->compaction_pri == kRoundRobin && cfd_->ioptions()->compaction_style == kCompactionStyleLevel) { return output_level_ > 0; } if (max_subcompactions_ <= 1) { return false; } ``` PlainTable does not support Subcompaction, including when AdaptiveTable is applied to PlainTable. subcompaction by default will result in the following error in some scenarios. ```c++ void PlainTableIterator::Seek(const Slice& target) { if (use_prefix_seek_ != !table_->IsTotalOrderMode()) { // This check is done here instead of NewIterator() to permit creating an // iterator with total_order_seek = true even if we won't be able to Seek() // it. This is needed for compaction: it creates iterator with // total_order_seek = true but usually never does Seek() on it, // only SeekToFirst(). status_ = Status::InvalidArgument( "total_order_seek not implemented for PlainTable."); offset_ = next_offset_ = table_->file_info_.data_end_offset; return; } ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12843 Reviewed By: ajkr Differential Revision: D59433477 Pulled By: cbi42 fbshipit-source-id: fb780ba7f7e8efdfedb7480abf14dd38e0b63677
2024-07-08 19:25:11 +00:00
TableFactory::kPlainTableName()) {
return false;
}
Support subcmpct using reserved resources for round-robin priority (#10341) Summary: Earlier implementation of round-robin priority can only pick one file at a time and disallows parallel compactions within the same level. In this PR, round-robin compaction policy will expand towards more input files with respecting some additional constraints, which are summarized as follows: * Constraint 1: We can only pick consecutive files - Constraint 1a: When a file is being compacted (or some input files are being compacted after expanding), we cannot choose it and have to stop choosing more files - Constraint 1b: When we reach the last file (with the largest keys), we cannot choose more files (the next file will be the first one with small keys) * Constraint 2: We should ensure the total compaction bytes (including the overlapped files from the next level) is no more than `mutable_cf_options_.max_compaction_bytes` * Constraint 3: We try our best to pick as many files as possible so that the post-compaction level size can be just less than `MaxBytesForLevel(start_level_)` * Constraint 4: If trivial move is allowed, we reuse the logic of `TryNonL0TrivialMove()` instead of expanding files with Constraint 3 More details can be found in `LevelCompactionBuilder::SetupOtherFilesWithRoundRobinExpansion()`. The above optimization accelerates the process of moving the compaction cursor, in which the write-amp can be further reduced. While a large compaction may lead to high write stall, we break this large compaction into several subcompactions **regardless of** the `max_subcompactions` limit. The number of subcompactions for round-robin compaction priority is determined through the following steps: * Step 1: Initialized against `max_output_file_limit`, the number of input files in the start level, and also the range size limit `ranges.size()` * Step 2: Call `AcquireSubcompactionResources()`when max subcompactions is not sufficient, but we may or may not obtain desired resources, additional number of resources is stored in `extra_num_subcompaction_threads_reserved_`). Subcompaction limit is changed and update `num_planned_subcompactions` with `GetSubcompactionLimit()` * Step 3: Call `ShrinkSubcompactionResources()` to ensure extra resources can be released (extra resources may exist for round-robin compaction when the number of actual number of subcompactions is less than the number of planned subcompactions) More details can be found in `CompactionJob::AcquireSubcompactionResources()`,`CompactionJob::ShrinkSubcompactionResources()`, and `CompactionJob::ReleaseSubcompactionResources()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10341 Test Plan: Add `CompactionPriMultipleFilesRoundRobin[1-3]` unit test in `compaction_picker_test.cc` and `RoundRobinSubcompactionsAgainstResources.SubcompactionsUsingResources/[0-4]`, `RoundRobinSubcompactionsAgainstPressureToken.PressureTokenTest/[0-1]` in `db_compaction_test.cc` Reviewed By: ajkr, hx235 Differential Revision: D37792644 Pulled By: littlepig2013 fbshipit-source-id: 7fecb7c4ffd97b34bbf6e3b760b2c35a772a0657
2022-07-24 18:12:44 +00:00
// Round-Robin pri under leveled compaction allows subcompactions by default
// and the number of subcompactions can be larger than max_subcompactions_
if (cfd_->ioptions()->compaction_pri == kRoundRobin &&
cfd_->ioptions()->compaction_style == kCompactionStyleLevel) {
return output_level_ > 0;
}
if (max_subcompactions_ <= 1) {
return false;
}
if (cfd_->ioptions()->compaction_style == kCompactionStyleLevel) {
return (start_level_ == 0 || is_manual_compaction_) && output_level_ > 0;
} else if (cfd_->ioptions()->compaction_style == kCompactionStyleUniversal) {
return number_levels_ > 1 && output_level_ > 0;
} else {
return false;
}
}
bool Compaction::DoesInputReferenceBlobFiles() const {
assert(input_version_);
const VersionStorageInfo* storage_info = input_version_->storage_info();
assert(storage_info);
if (storage_info->GetBlobFiles().empty()) {
return false;
}
for (size_t i = 0; i < inputs_.size(); ++i) {
for (const FileMetaData* meta : inputs_[i].files) {
assert(meta);
if (meta->oldest_blob_file_number != kInvalidBlobFileNumber) {
return true;
}
}
}
return false;
}
Try to start TTL earlier with kMinOverlappingRatio is used (#8749) Summary: Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles. When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed. In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749 Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end. Reviewed By: jay-zhuang Differential Revision: D30735261 fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
2021-11-01 21:32:12 +00:00
uint64_t Compaction::MinInputFileOldestAncesterTime(
const InternalKey* start, const InternalKey* end) const {
uint64_t min_oldest_ancester_time = std::numeric_limits<uint64_t>::max();
Try to start TTL earlier with kMinOverlappingRatio is used (#8749) Summary: Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles. When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed. In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749 Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end. Reviewed By: jay-zhuang Differential Revision: D30735261 fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
2021-11-01 21:32:12 +00:00
const InternalKeyComparator& icmp =
column_family_data()->internal_comparator();
for (const auto& level_files : inputs_) {
for (const auto& file : level_files.files) {
Try to start TTL earlier with kMinOverlappingRatio is used (#8749) Summary: Right now, when options.ttl is set, compactions are triggered around the time when TTL is reached. This might cause extra compactions which are often bursty. This commit tries to mitigate it by picking those files earlier in normal compaction picking process. This is only implemented using kMinOverlappingRatio with Leveled compaction as it is the default value and it is more complicated to change other styles. When a file is aged more than ttl/2, RocksDB starts to boost the compaction priority of files in normal compaction picking process, and hope by the time TTL is reached, very few extra compaction is needed. In order for this to work, another change is made: during a compaction, if an output level file is older than ttl/2, cut output files based on original boundary (if it is not in the last level). This is to make sure that after an old file is moved to the next level, and new data is merged from the upper level, the new data falling into this range isn't reset with old timestamp. Without this change, in many cases, most files from one level will keep having old timestamp, even if they have newer data and we stuck in it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8749 Test Plan: Add a unit test to test the boosting logic. Will add a unit test to test it end-to-end. Reviewed By: jay-zhuang Differential Revision: D30735261 fbshipit-source-id: 503c2d89250b22911eb99e72b379be154de3428e
2021-11-01 21:32:12 +00:00
if (start != nullptr && icmp.Compare(file->largest, *start) < 0) {
continue;
}
if (end != nullptr && icmp.Compare(file->smallest, *end) > 0) {
continue;
}
uint64_t oldest_ancester_time = file->TryGetOldestAncesterTime();
if (oldest_ancester_time != 0) {
min_oldest_ancester_time =
std::min(min_oldest_ancester_time, oldest_ancester_time);
}
FIFO Compaction with TTL Summary: Introducing FIFO compactions with TTL. FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size. To address that request: - Added a new TTL option to FIFO compaction options. - Updated FIFO compaction score to take TTL into consideration. - Added a new table property, creation_time, to keep track of when the SST file is created. - Creation_time is set as below: - On Flush: Set to the time of flush. - On Compaction: Set to the max creation_time of all the files involved in the compaction. - On Repair and Recovery: Set to the time of repair/recovery. - Old files created prior to this code change will have a creation_time of 0. - FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day. - FIFO compaction will fall back to the prior way of deleting files based on size if: - the creation_time of all files involved in compaction is 0. - the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted. This feature is not supported if max_open_files != -1 or with table formats other than Block-based. **Test Plan:** Added tests. **Benchmark results:** Base: FIFO with max size: 100MB :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found) ``` With TTL (a low one for testing) :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20 readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found) ``` Example Log lines: ``` 2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion 2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files ... 2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK 2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40} ``` SST Files remaining in the dbbench dir, after db_bench execution completed: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst -rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst -rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst -rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst ``` Closes https://github.com/facebook/rocksdb/pull/2480 Differential Revision: D5305116 Pulled By: sagar0 fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
2017-06-28 00:02:20 +00:00
}
}
return min_oldest_ancester_time;
FIFO Compaction with TTL Summary: Introducing FIFO compactions with TTL. FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size. To address that request: - Added a new TTL option to FIFO compaction options. - Updated FIFO compaction score to take TTL into consideration. - Added a new table property, creation_time, to keep track of when the SST file is created. - Creation_time is set as below: - On Flush: Set to the time of flush. - On Compaction: Set to the max creation_time of all the files involved in the compaction. - On Repair and Recovery: Set to the time of repair/recovery. - Old files created prior to this code change will have a creation_time of 0. - FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day. - FIFO compaction will fall back to the prior way of deleting files based on size if: - the creation_time of all files involved in compaction is 0. - the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted. This feature is not supported if max_open_files != -1 or with table formats other than Block-based. **Test Plan:** Added tests. **Benchmark results:** Base: FIFO with max size: 100MB :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found) ``` With TTL (a low one for testing) :: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20 readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found) ``` Example Log lines: ``` 2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion 2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files ... 2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK 2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40} ``` SST Files remaining in the dbbench dir, after db_bench execution completed: ``` svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst -rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst -rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst -rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst ``` Closes https://github.com/facebook/rocksdb/pull/2480 Differential Revision: D5305116 Pulled By: sagar0 fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
2017-06-28 00:02:20 +00:00
}
Sort L0 files by newly introduced epoch_num (#10922) Summary: **Context:** Sorting L0 files by `largest_seqno` has at least two inconvenience: - File ingestion and compaction involving ingested files can create files of overlapping seqno range with the existing files. `force_consistency_check=true` will catch such overlap seqno range even those harmless overlap. - For example, consider the following sequence of events ("key@n" indicates key at seqno "n") - insert k1@1 to memtable m1 - ingest file s1 with k2@2, ingest file s2 with k3@3 - insert k4@4 to m1 - compact files s1, s2 and result in new file s3 of seqno range [2, 3] - flush m1 and result in new file s4 of seqno range [1, 4]. And `force_consistency_check=true` will think s4 and s3 has file reordering corruption that might cause retuning an old value of k1 - However such caught corruption is a false positive since s1, s2 will not have overlapped keys with k1 or whatever inserted into m1 before ingest file s1 by the requirement of file ingestion (otherwise the m1 will be flushed first before any of the file ingestion completes). Therefore there in fact isn't any file reordering corruption. - Single delete can decrease a file's largest seqno and ordering by `largest_seqno` can introduce a wrong ordering hence file reordering corruption - For example, consider the following sequence of events ("key@n" indicates key at seqno "n", Credit to ajkr for this example) - an existing SST s1 contains only k1@1 - insert k1@2 to memtable m1 - ingest file s2 with k3@3, ingest file s3 with k4@4 - insert single delete k5@5 in m1 - flush m1 and result in new file s4 of seqno range [2, 5] - compact s1, s2, s3 and result in new file s5 of seqno range [1, 4] - compact s4 and result in new file s6 of seqno range [2] due to single delete - By the last step, we have file ordering by largest seqno (">" means "newer") : s5 > s6 while s6 contains a newer version of the k1's value (i.e, k1@2) than s5, which is a real reordering corruption. While this can be caught by `force_consistency_check=true`, there isn't a good way to prevent this from happening if ordering by `largest_seqno` Therefore, we are redesigning the sorting criteria of L0 files and avoid above inconvenience. Credit to ajkr , we now introduce `epoch_num` which describes the order of a file being flushed or ingested/imported (compaction output file will has the minimum `epoch_num` among input files'). This will avoid the above inconvenience in the following ways: - In the first case above, there will no longer be overlap seqno range check in `force_consistency_check=true` but `epoch_number` ordering check. This will result in file ordering s1 < s2 < s4 (pre-compaction) and s3 < s4 (post-compaction) which won't trigger false positive corruption. See test class `DBCompactionTestL0FilesMisorderCorruption*` for more. - In the second case above, this will result in file ordering s1 < s2 < s3 < s4 (pre-compacting s1, s2, s3), s5 < s4 (post-compacting s1, s2, s3), s5 < s6 (post-compacting s4), which are correct file ordering without causing any corruption. **Summary:** - Introduce `epoch_number` stored per `ColumnFamilyData` and sort CF's L0 files by their assigned `epoch_number` instead of `largest_seqno`. - `epoch_number` is increased and assigned upon `VersionEdit::AddFile()` for flush (or similarly for WriteLevel0TableForRecovery) and file ingestion (except for allow_behind_true, which will always get assigned as the `kReservedEpochNumberForFileIngestedBehind`) - Compaction output file is assigned with the minimum `epoch_number` among input files' - Refit level: reuse refitted file's epoch_number - Other paths needing `epoch_number` treatment: - Import column families: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo` - Repair: reuse file's epoch_number if exists. If not, assign one based on `NewestFirstBySeqNo`. - Assigning new epoch_number to a file and adding this file to LSM tree should be atomic. This is guaranteed by us assigning epoch_number right upon `VersionEdit::AddFile()` where this version edit will be apply to LSM tree shape right after by holding the db mutex (e.g, flush, file ingestion, import column family) or by there is only 1 ongoing edit per CF (e.g, WriteLevel0TableForRecovery, Repair). - Assigning the minimum input epoch number to compaction output file won't misorder L0 files (even through later `Refit(target_level=0)`). It's due to for every key "k" in the input range, a legit compaction will cover a continuous epoch number range of that key. As long as we assign the key "k" the minimum input epoch number, it won't become newer or older than the versions of this key that aren't included in this compaction hence no misorder. - Persist `epoch_number` of each file in manifest and recover `epoch_number` on db recovery - Backward compatibility with old db without `epoch_number` support is guaranteed by assigning `epoch_number` to recovered files by `NewestFirstBySeqno` order. See `VersionStorageInfo::RecoverEpochNumbers()` for more - Forward compatibility with manifest is guaranteed by flexibility of `NewFileCustomTag` - Replace `force_consistent_check` on L0 with `epoch_number` and remove false positive check like case 1 with `largest_seqno` above - Due to backward compatibility issue, we might encounter files with missing epoch number at the beginning of db recovery. We will still use old L0 sorting mechanism (`NewestFirstBySeqno`) to check/sort them till we infer their epoch number. See usages of `EpochNumberRequirement`. - Remove fix https://github.com/facebook/rocksdb/pull/5958#issue-511150930 and their outdated tests to file reordering corruption because such fix can be replaced by this PR. - Misc: - update existing tests with `epoch_number` so make check will pass - update https://github.com/facebook/rocksdb/pull/5958#issue-511150930 tests to verify corruption is fixed using `epoch_number` and cover universal/fifo compaction/CompactRange/CompactFile cases - assert db_mutex is held for a few places before calling ColumnFamilyData::NewEpochNumber() Pull Request resolved: https://github.com/facebook/rocksdb/pull/10922 Test Plan: - `make check` - New unit tests under `db/db_compaction_test.cc`, `db/db_test2.cc`, `db/version_builder_test.cc`, `db/repair_test.cc` - Updated tests (i.e, `DBCompactionTestL0FilesMisorderCorruption*`) under https://github.com/facebook/rocksdb/pull/5958#issue-511150930 - [Ongoing] Compatibility test: manually run https://github.com/ajkr/rocksdb/commit/36a5686ec012f35a4371e409aa85c404ca1c210d (with file ingestion off for running the `.orig` binary to prevent this bug affecting upgrade/downgrade formality checking) for 1 hour on `simple black/white box`, `cf_consistency/txn/enable_ts with whitebox + test_best_efforts_recovery with blackbox` - [Ongoing] normal db stress test - [Ongoing] db stress test with aggressive value https://github.com/facebook/rocksdb/pull/10761 Reviewed By: ajkr Differential Revision: D41063187 Pulled By: hx235 fbshipit-source-id: 826cb23455de7beaabe2d16c57682a82733a32a9
2022-12-13 21:29:37 +00:00
uint64_t Compaction::MinInputFileEpochNumber() const {
uint64_t min_epoch_number = std::numeric_limits<uint64_t>::max();
for (const auto& inputs_per_level : inputs_) {
for (const auto& file : inputs_per_level.files) {
min_epoch_number = std::min(min_epoch_number, file->epoch_number);
}
}
return min_epoch_number;
}
int Compaction::EvaluatePenultimateLevel(
const VersionStorageInfo* vstorage,
const ImmutableOptions& immutable_options, const int start_level,
const int output_level) {
// TODO: currently per_key_placement feature only support level and universal
// compaction
if (immutable_options.compaction_style != kCompactionStyleLevel &&
immutable_options.compaction_style != kCompactionStyleUniversal) {
return kInvalidLevel;
}
if (output_level != immutable_options.num_levels - 1) {
return kInvalidLevel;
}
int penultimate_level = output_level - 1;
assert(penultimate_level < immutable_options.num_levels);
if (penultimate_level <= 0) {
return kInvalidLevel;
}
// If the penultimate level is not within input level -> output level range
// check if the penultimate output level is empty, if it's empty, it could
// also be locked for the penultimate output.
// TODO: ideally, it only needs to check if there's a file within the
// compaction output key range. For simplicity, it just check if there's any
// file on the penultimate level.
if (start_level == immutable_options.num_levels - 1 &&
(immutable_options.compaction_style != kCompactionStyleUniversal ||
!vstorage->LevelFiles(penultimate_level).empty())) {
return kInvalidLevel;
}
bool supports_per_key_placement =
immutable_options.preclude_last_level_data_seconds > 0;
// it could be overridden by unittest
TEST_SYNC_POINT_CALLBACK("Compaction::SupportsPerKeyPlacement:Enabled",
&supports_per_key_placement);
if (!supports_per_key_placement) {
return kInvalidLevel;
}
return penultimate_level;
}
Optimize compaction for standalone range deletion files (#13078) Summary: This PR adds some optimization for compacting standalone range deletion files. A standalone range deletion file is one with just a single range deletion. Currently, such a file is used in bulk loading to achieve something like atomically delete old version of all data with one big range deletion and adding new version of data. These are the changes included in the PR: 1) When a standalone range deletion file is ingested via bulk loading, it's marked for compaction. 2) When picking input files during compaction picking, we attempt to only pick a standalone range deletion file when oldest snapshot is at or above the file's seqno. To do this, `PickCompaction` API is updated to take existing snapshots as an input. This is only done for the universal compaction + UDT disabled combination, we save querying for existing snapshots and not pass it for all other cases. 3) At `Compaction` construction time, the input files will be filtered to examine if any of them can be skipped for compaction iterator. For example, if all the data of the file is deleted by a standalone range tombstone, and the oldest snapshot is at or above such range tombstone, this file will be filtered out. 4) Every time a snapshot is released, we examine if any column family has standalone range deletion files that becomes eligible to be scheduled for compaction. And schedule one for it. Potential future improvements: - Add some dedicated statistics for the filtered files. - Extend this input filtering to L0 files' compactions cases when a newer L0 file could shadow an older L0 file Pull Request resolved: https://github.com/facebook/rocksdb/pull/13078 Test Plan: Added unit tests and stress tested a few rounds Reviewed By: cbi42 Differential Revision: D64879415 Pulled By: jowlyzhang fbshipit-source-id: 02b8683fddbe11f093bcaa0a38406deb39f44d9e
2024-10-25 16:32:14 +00:00
void Compaction::FilterInputsForCompactionIterator() {
assert(earliest_snapshot_.has_value());
// cfd_ is not populated at Compaction construction time, get it from
// VersionStorageInfo instead.
assert(input_vstorage_);
const auto* ucmp = input_vstorage_->user_comparator();
assert(ucmp);
// Simply comparing file boundaries when user-defined timestamp is defined
// is not as safe because we need to also compare timestamp to know for
// sure. Although entries with higher timestamp is also supposed to have
// higher sequence number for the same user key (without timestamp).
assert(ucmp->timestamp_size() == 0);
size_t num_input_levels = inputs_.size();
// TODO(yuzhangyu): filtering of older L0 file by new L0 file is not
// supported yet.
FileMetaData* rangedel_candidate = inputs_[0].level == 0
? inputs_[0].files.back()
: inputs_[0].files.front();
assert(rangedel_candidate);
if (!rangedel_candidate->FileIsStandAloneRangeTombstone() ||
!DataIsDefinitelyInSnapshot(rangedel_candidate->fd.smallest_seqno,
earliest_snapshot_.value(),
snapshot_checker_)) {
for (size_t level = 0; level < num_input_levels; level++) {
DoGenerateLevelFilesBrief(&input_levels_[level], inputs_[level].files,
&arena_);
}
return;
}
Slice rangedel_start_ukey = rangedel_candidate->smallest.user_key();
Slice rangedel_end_ukey = rangedel_candidate->largest.user_key();
SequenceNumber rangedel_seqno = rangedel_candidate->fd.smallest_seqno;
std::vector<std::vector<FileMetaData*>> non_start_level_input_files;
non_start_level_input_files.reserve(num_input_levels - 1);
non_start_level_input_files_filtered_.reserve(num_input_levels - 1);
for (size_t level = 1; level < num_input_levels; level++) {
non_start_level_input_files.emplace_back();
non_start_level_input_files_filtered_.emplace_back();
for (FileMetaData* file : inputs_[level].files) {
non_start_level_input_files_filtered_.back().push_back(false);
// When range data and point data has the same sequence number, point
// data wins. Range deletion end key is exclusive, so check it's bigger
// than file right boundary user key.
if (rangedel_seqno > file->fd.largest_seqno &&
ucmp->CompareWithoutTimestamp(rangedel_start_ukey,
file->smallest.user_key()) <= 0 &&
ucmp->CompareWithoutTimestamp(rangedel_end_ukey,
file->largest.user_key()) > 0) {
non_start_level_input_files_filtered_.back().back() = true;
} else {
non_start_level_input_files.back().push_back(file);
}
}
}
DoGenerateLevelFilesBrief(&input_levels_[0], inputs_[0].files, &arena_);
assert(non_start_level_input_files.size() == num_input_levels - 1);
for (size_t level = 1; level < num_input_levels; level++) {
DoGenerateLevelFilesBrief(&input_levels_[level],
non_start_level_input_files[level - 1], &arena_);
}
}
} // namespace ROCKSDB_NAMESPACE