rocksdb/table/block_based/flush_block_policy.cc

133 lines
4.8 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
#include "rocksdb/flush_block_policy.h"
#include <cassert>
#include <mutex>
#include "rocksdb/options.h"
#include "rocksdb/slice.h"
#include "rocksdb/utilities/customizable_util.h"
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
#include "table/block_based/block_based_table_reader.h"
#include "table/block_based/block_builder.h"
#include "table/block_based/flush_block_policy_impl.h"
#include "table/format.h"
namespace ROCKSDB_NAMESPACE {
// Flush block by size
class FlushBlockBySizePolicy : public FlushBlockPolicy {
public:
// @params block_size: Approximate size of user data packed per
// block.
// @params block_size_deviation: This is used to close a block before it
// reaches the configured
FlushBlockBySizePolicy(const uint64_t block_size,
const uint64_t block_size_deviation, const bool align,
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 16:57:43 +00:00
const BlockBuilder& data_block_builder)
: block_size_(block_size),
block_size_deviation_limit_(
((block_size * (100 - block_size_deviation)) + 99) / 100),
align_(align),
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 16:57:43 +00:00
data_block_builder_(data_block_builder) {}
bool Update(const Slice& key, const Slice& value) override {
// it makes no sense to flush when the data block is empty
if (data_block_builder_.empty()) {
return false;
}
auto curr_size = data_block_builder_.CurrentSizeEstimate();
// Do flush if one of the below two conditions is true:
// 1) if the current estimated size already exceeds the block size,
// 2) block_size_deviation is set and the estimated size after appending
// the kv will exceed the block size and the current size is under the
// the deviation.
return curr_size >= block_size_ || BlockAlmostFull(key, value);
}
private:
bool BlockAlmostFull(const Slice& key, const Slice& value) const {
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 16:57:43 +00:00
if (block_size_deviation_limit_ == 0) {
return false;
}
const auto curr_size = data_block_builder_.CurrentSizeEstimate();
auto estimated_size_after =
data_block_builder_.EstimateSizeAfterKV(key, value);
if (align_) {
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
estimated_size_after += BlockBasedTable::kBlockTrailerSize;
return estimated_size_after > block_size_;
}
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 16:57:43 +00:00
return estimated_size_after > block_size_ &&
curr_size > block_size_deviation_limit_;
}
const uint64_t block_size_;
Miscellaneous performance improvements Summary: I was investigating performance issues in the SstFileWriter and found all of the following: - The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function. - In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key. - The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator. - The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value. - The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function. - BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over. - Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on. - FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time. - Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append(). Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9. Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas. Reviewers: sdong, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D59607
2016-06-13 16:57:43 +00:00
const uint64_t block_size_deviation_limit_;
const bool align_;
const BlockBuilder& data_block_builder_;
};
FlushBlockPolicy* FlushBlockBySizePolicyFactory::NewFlushBlockPolicy(
const BlockBasedTableOptions& table_options,
const BlockBuilder& data_block_builder) const {
return new FlushBlockBySizePolicy(
table_options.block_size, table_options.block_size_deviation,
table_options.block_align, data_block_builder);
}
FlushBlockPolicy* FlushBlockBySizePolicyFactory::NewFlushBlockPolicy(
const uint64_t size, const int deviation,
const BlockBuilder& data_block_builder) {
return new FlushBlockBySizePolicy(size, deviation, false, data_block_builder);
}
static int RegisterFlushBlockPolicyFactories(ObjectLibrary& library,
const std::string& /*arg*/) {
library.AddFactory<FlushBlockPolicyFactory>(
FlushBlockBySizePolicyFactory::kClassName(),
[](const std::string& /*uri*/,
std::unique_ptr<FlushBlockPolicyFactory>* guard,
std::string* /* errmsg */) {
guard->reset(new FlushBlockBySizePolicyFactory());
return guard->get();
});
library.AddFactory<FlushBlockPolicyFactory>(
FlushBlockEveryKeyPolicyFactory::kClassName(),
[](const std::string& /*uri*/,
std::unique_ptr<FlushBlockPolicyFactory>* guard,
std::string* /* errmsg */) {
guard->reset(new FlushBlockEveryKeyPolicyFactory());
return guard->get();
});
return 2;
}
FlushBlockBySizePolicyFactory::FlushBlockBySizePolicyFactory()
: FlushBlockPolicyFactory() {}
Status FlushBlockPolicyFactory::CreateFromString(
const ConfigOptions& config_options, const std::string& value,
std::shared_ptr<FlushBlockPolicyFactory>* factory) {
static std::once_flag once;
std::call_once(once, [&]() {
RegisterFlushBlockPolicyFactories(*(ObjectLibrary::Default().get()), "");
});
if (value.empty()) {
factory->reset(new FlushBlockBySizePolicyFactory());
return Status::OK();
} else {
return LoadSharedObject<FlushBlockPolicyFactory>(config_options, value,
factory);
}
}
} // namespace ROCKSDB_NAMESPACE