rocksdb/db/log_writer.cc

280 lines
9 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/log_writer.h"
#include <cstdint>
#include "file/writable_file_writer.h"
#include "rocksdb/env.h"
#include "rocksdb/io_status.h"
#include "util/coding.h"
#include "util/crc32c.h"
#include "util/udt_util.h"
namespace ROCKSDB_NAMESPACE {
namespace log {
Writer::Writer(std::unique_ptr<WritableFileWriter>&& dest, uint64_t log_number,
bool recycle_log_files, bool manual_flush,
CompressionType compression_type)
: dest_(std::move(dest)),
block_offset_(0),
log_number_(log_number),
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
recycle_log_files_(recycle_log_files),
manual_flush_(manual_flush),
compression_type_(compression_type),
compress_(nullptr) {
for (int i = 0; i <= kMaxRecordType; i++) {
char t = static_cast<char>(i);
type_crc_[i] = crc32c::Value(&t, 1);
}
}
Writer::~Writer() {
if (dest_) {
WriteBuffer().PermitUncheckedError();
}
if (compress_) {
delete compress_;
}
}
Optimize for serial commits in 2PC Summary: Throughput: 46k tps in our sysbench settings (filling the details later) The idea is to have the simplest change that gives us a reasonable boost in 2PC throughput. Major design changes: 1. The WAL file internal buffer is not flushed after each write. Instead it is flushed before critical operations (WAL copy via fs) or when FlushWAL is called by MySQL. Flushing the WAL buffer is also protected via mutex_. 2. Use two sequence numbers: last seq, and last seq for write. Last seq is the last visible sequence number for reads. Last seq for write is the next sequence number that should be used to write to WAL/memtable. This allows to have a memtable write be in parallel to WAL writes. 3. BatchGroup is not used for writes. This means that we can have parallel writers which changes a major assumption in the code base. To accommodate for that i) allow only 1 WriteImpl that intends to write to memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes come via group commit phase which is serial anyway, ii) make all the parts in the code base that assumed to be the only writer (via EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are protected via a stat_mutex_. Note: the first commit has the approach figured out but is not clean. Submitting the PR anyway to get the early feedback on the approach. If we are ok with the approach I will go ahead with this updates: 0) Rebase with Yi's pipelining changes 1) Currently batching is disabled by default to make sure that it will be consistent with all unit tests. Will make this optional via a config. 2) A couple of unit tests are disabled. They need to be updated with the serial commit of 2PC taken into account. 3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires releasing mutex_ beforehand (the same way EnterUnbatched does). This needs to be cleaned up. Closes https://github.com/facebook/rocksdb/pull/2345 Differential Revision: D5210732 Pulled By: maysamyabandeh fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 21:06:43 +00:00
IOStatus Writer::WriteBuffer() {
if (dest_->seen_error()) {
return IOStatus::IOError("Seen error. Skip writing buffer.");
}
return dest_->Flush();
}
IOStatus Writer::Close() {
IOStatus s;
if (dest_) {
s = dest_->Close();
dest_.reset();
}
return s;
}
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
IOStatus Writer::AddRecord(const Slice& slice,
Env::IOPriority rate_limiter_priority) {
const char* ptr = slice.data();
size_t left = slice.size();
// Header size varies depending on whether we are recycling or not.
const int header_size =
recycle_log_files_ ? kRecyclableHeaderSize : kHeaderSize;
// Fragment the record if necessary and emit it. Note that if slice
// is empty, we still want to iterate once to emit a single
// zero-length record
bool begin = true;
int compress_remaining = 0;
bool compress_start = false;
if (compress_) {
compress_->Reset();
compress_start = true;
}
IOStatus s;
do {
const int64_t leftover = kBlockSize - block_offset_;
assert(leftover >= 0);
if (leftover < header_size) {
// Switch to a new block
if (leftover > 0) {
// Fill the trailer (literal below relies on kHeaderSize and
// kRecyclableHeaderSize being <= 11)
assert(header_size <= 11);
s = dest_->Append(Slice("\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
static_cast<size_t>(leftover)),
0 /* crc32c_checksum */, rate_limiter_priority);
if (!s.ok()) {
break;
}
}
block_offset_ = 0;
}
// Invariant: we never leave < header_size bytes in a block.
assert(static_cast<int64_t>(kBlockSize - block_offset_) >= header_size);
const size_t avail = kBlockSize - block_offset_ - header_size;
// Compress the record if compression is enabled.
// Compress() is called at least once (compress_start=true) and after the
// previous generated compressed chunk is written out as one or more
// physical records (left=0).
if (compress_ && (compress_start || left == 0)) {
compress_remaining = compress_->Compress(slice.data(), slice.size(),
compressed_buffer_.get(), &left);
if (compress_remaining < 0) {
// Set failure status
s = IOStatus::IOError("Unexpected WAL compression error");
s.SetDataLoss(true);
break;
} else if (left == 0) {
// Nothing left to compress
if (!compress_start) {
break;
}
}
compress_start = false;
ptr = compressed_buffer_.get();
}
const size_t fragment_length = (left < avail) ? left : avail;
RecordType type;
const bool end = (left == fragment_length && compress_remaining == 0);
if (begin && end) {
type = recycle_log_files_ ? kRecyclableFullType : kFullType;
} else if (begin) {
type = recycle_log_files_ ? kRecyclableFirstType : kFirstType;
} else if (end) {
type = recycle_log_files_ ? kRecyclableLastType : kLastType;
} else {
type = recycle_log_files_ ? kRecyclableMiddleType : kMiddleType;
}
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
s = EmitPhysicalRecord(type, ptr, fragment_length, rate_limiter_priority);
ptr += fragment_length;
left -= fragment_length;
begin = false;
} while (s.ok() && (left > 0 || compress_remaining > 0));
if (s.ok()) {
if (!manual_flush_) {
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
s = dest_->Flush(rate_limiter_priority);
}
}
return s;
}
IOStatus Writer::AddCompressionTypeRecord() {
// Should be the first record
assert(block_offset_ == 0);
if (compression_type_ == kNoCompression) {
// No need to add a record
return IOStatus::OK();
}
CompressionTypeRecord record(compression_type_);
std::string encode;
record.EncodeTo(&encode);
IOStatus s =
EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());
if (s.ok()) {
if (!manual_flush_) {
s = dest_->Flush();
}
// Initialize fields required for compression
const size_t max_output_buffer_len =
kBlockSize - (recycle_log_files_ ? kRecyclableHeaderSize : kHeaderSize);
CompressionOptions opts;
constexpr uint32_t compression_format_version = 2;
compress_ = StreamingCompress::Create(compression_type_, opts,
compression_format_version,
max_output_buffer_len);
assert(compress_ != nullptr);
compressed_buffer_ =
std::unique_ptr<char[]>(new char[max_output_buffer_len]);
assert(compressed_buffer_);
} else {
// Disable compression if the record could not be added.
compression_type_ = kNoCompression;
}
return s;
}
IOStatus Writer::MaybeAddUserDefinedTimestampSizeRecord(
const UnorderedMap<uint32_t, size_t>& cf_to_ts_sz,
Env::IOPriority rate_limiter_priority) {
std::vector<std::pair<uint32_t, size_t>> ts_sz_to_record;
for (const auto& [cf_id, ts_sz] : cf_to_ts_sz) {
if (recorded_cf_to_ts_sz_.count(cf_id) != 0) {
// A column family's user-defined timestamp size should not be
// updated while DB is running.
assert(recorded_cf_to_ts_sz_[cf_id] == ts_sz);
} else if (ts_sz != 0) {
ts_sz_to_record.emplace_back(cf_id, ts_sz);
recorded_cf_to_ts_sz_.insert(std::make_pair(cf_id, ts_sz));
}
}
if (ts_sz_to_record.empty()) {
return IOStatus::OK();
}
UserDefinedTimestampSizeRecord record(std::move(ts_sz_to_record));
std::string encoded;
record.EncodeTo(&encoded);
RecordType type = recycle_log_files_ ? kRecyclableUserDefinedTimestampSizeType
: kUserDefinedTimestampSizeType;
return EmitPhysicalRecord(type, encoded.data(), encoded.size(),
rate_limiter_priority);
}
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
bool Writer::BufferIsEmpty() { return dest_->BufferIsEmpty(); }
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
IOStatus Writer::EmitPhysicalRecord(RecordType t, const char* ptr, size_t n,
Env::IOPriority rate_limiter_priority) {
assert(n <= 0xffff); // Must fit in two bytes
size_t header_size;
char buf[kRecyclableHeaderSize];
// Format the header
buf[4] = static_cast<char>(n & 0xff);
buf[5] = static_cast<char>(n >> 8);
buf[6] = static_cast<char>(t);
uint32_t crc = type_crc_[t];
if (t < kRecyclableFullType || t == kSetCompressionType ||
t == kUserDefinedTimestampSizeType) {
// Legacy record format
assert(block_offset_ + kHeaderSize + n <= kBlockSize);
header_size = kHeaderSize;
} else {
// Recyclable record format
assert(block_offset_ + kRecyclableHeaderSize + n <= kBlockSize);
header_size = kRecyclableHeaderSize;
// Only encode low 32-bits of the 64-bit log number. This means
// we will fail to detect an old record if we recycled a log from
// ~4 billion logs ago, but that is effectively impossible, and
// even if it were we'dbe far more likely to see a false positive
// on the 32-bit CRC.
EncodeFixed32(buf + 7, static_cast<uint32_t>(log_number_));
crc = crc32c::Extend(crc, buf + 7, 4);
}
// Compute the crc of the record type and the payload.
Using existing crc32c checksum in checksum handoff for Manifest and WAL (#8412) Summary: In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead. In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412 Test Plan: make check, add new testing cases. Reviewed By: anand1976 Differential Revision: D29151545 Pulled By: zhichao-cao fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
2021-06-25 07:46:33 +00:00
uint32_t payload_crc = crc32c::Value(ptr, n);
crc = crc32c::Crc32cCombine(crc, payload_crc, n);
crc = crc32c::Mask(crc); // Adjust for storage
Fail recovery when MANIFEST record checksum mismatch (#6996) Summary: https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows. Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further. ``` // Correct // Inside Recover LogReporter reporter; reporter.status = &s; log::Reader reader(..., reporter); while (reader.ReadRecord() && s.ok()) { ... } ``` The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported. ``` // Incorrect // Inside Recover LogReporter reporter; reporter.status = &s; log::Reader reader(..., reporter); s = ReadAndRecover(reader, ...); // Inside ReadAndRecover Status s; // Shadows the s in Recover. while (reader.ReadRecord() && s.ok()) { ... } ``` `LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`. Test plan (devserver): make check Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996 Reviewed By: ajkr Differential Revision: D22105746 Pulled By: riversand963 fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
2020-06-18 17:07:42 +00:00
TEST_SYNC_POINT_CALLBACK("LogWriter::EmitPhysicalRecord:BeforeEncodeChecksum",
&crc);
EncodeFixed32(buf, crc);
// Write the header and the payload
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
IOStatus s = dest_->Append(Slice(buf, header_size), 0 /* crc32c_checksum */,
rate_limiter_priority);
if (s.ok()) {
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
s = dest_->Append(Slice(ptr, n), payload_crc, rate_limiter_priority);
}
block_offset_ += header_size + n;
return s;
}
} // namespace log
} // namespace ROCKSDB_NAMESPACE