rocksdb/db/memtable.cc

995 lines
36 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "db/memtable.h"
#include <algorithm>
#include <limits>
#include <memory>
#include "db/dbformat.h"
#include "db/merge_context.h"
#include "db/merge_helper.h"
#include "db/pinned_iterators_manager.h"
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
#include "db/range_tombstone_fragmenter.h"
#include "db/read_callback.h"
#include "monitoring/perf_context_imp.h"
#include "monitoring/statistics.h"
#include "port/port.h"
#include "rocksdb/comparator.h"
#include "rocksdb/env.h"
#include "rocksdb/iterator.h"
#include "rocksdb/merge_operator.h"
#include "rocksdb/slice_transform.h"
#include "rocksdb/write_buffer_manager.h"
#include "table/internal_iterator.h"
#include "table/iterator_wrapper.h"
#include "table/merging_iterator.h"
#include "util/arena.h"
#include "util/autovector.h"
#include "util/coding.h"
#include "util/memory_usage.h"
#include "util/murmurhash.h"
2013-11-27 19:47:40 +00:00
#include "util/mutexlock.h"
#include "util/util.h"
namespace rocksdb {
ImmutableMemTableOptions::ImmutableMemTableOptions(
const ImmutableCFOptions& ioptions,
const MutableCFOptions& mutable_cf_options)
: arena_block_size(mutable_cf_options.arena_block_size),
memtable_prefix_bloom_bits(
static_cast<uint32_t>(
static_cast<double>(mutable_cf_options.write_buffer_size) *
mutable_cf_options.memtable_prefix_bloom_size_ratio) *
8u),
memtable_huge_page_size(mutable_cf_options.memtable_huge_page_size),
inplace_update_support(ioptions.inplace_update_support),
inplace_update_num_locks(mutable_cf_options.inplace_update_num_locks),
inplace_callback(ioptions.inplace_callback),
max_successive_merges(mutable_cf_options.max_successive_merges),
statistics(ioptions.statistics),
merge_operator(ioptions.merge_operator),
info_log(ioptions.info_log) {}
MemTable::MemTable(const InternalKeyComparator& cmp,
const ImmutableCFOptions& ioptions,
const MutableCFOptions& mutable_cf_options,
WriteBufferManager* write_buffer_manager,
SequenceNumber latest_seq, uint32_t column_family_id)
: comparator_(cmp),
moptions_(ioptions, mutable_cf_options),
refs_(0),
kArenaBlockSize(OptimizeBlockSize(moptions_.arena_block_size)),
mem_tracker_(write_buffer_manager),
arena_(moptions_.arena_block_size,
(write_buffer_manager != nullptr &&
(write_buffer_manager->enabled() ||
write_buffer_manager->cost_to_cache()))
? &mem_tracker_
: nullptr,
mutable_cf_options.memtable_huge_page_size),
table_(ioptions.memtable_factory->CreateMemTableRep(
comparator_, &arena_, mutable_cf_options.prefix_extractor.get(),
ioptions.info_log, column_family_id)),
range_del_table_(SkipListFactory().CreateMemTableRep(
comparator_, &arena_, nullptr /* transform */, ioptions.info_log,
column_family_id)),
is_range_del_table_empty_(true),
data_size_(0),
num_entries_(0),
num_deletes_(0),
write_buffer_size_(mutable_cf_options.write_buffer_size),
flush_in_progress_(false),
flush_completed_(false),
file_number_(0),
first_seqno_(0),
earliest_seqno_(latest_seq),
creation_seq_(latest_seq),
mem_next_logfile_number_(0),
min_prep_log_referenced_(0),
locks_(moptions_.inplace_update_support
? moptions_.inplace_update_num_locks
: 0),
prefix_extractor_(mutable_cf_options.prefix_extractor.get()),
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
flush_state_(FLUSH_NOT_REQUESTED),
env_(ioptions.env),
insert_with_hint_prefix_extractor_(
ioptions.memtable_insert_with_hint_prefix_extractor),
oldest_key_time_(std::numeric_limits<uint64_t>::max()),
atomic_flush_seqno_(kMaxSequenceNumber) {
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
UpdateFlushState();
// something went wrong if we need to flush before inserting anything
assert(!ShouldScheduleFlush());
if (prefix_extractor_ && moptions_.memtable_prefix_bloom_bits > 0) {
prefix_bloom_.reset(new DynamicBloom(
&arena_, moptions_.memtable_prefix_bloom_bits, ioptions.bloom_locality,
6 /* hard coded 6 probes */, nullptr, moptions_.memtable_huge_page_size,
ioptions.info_log));
}
}
MemTable::~MemTable() {
mem_tracker_.FreeMem();
assert(refs_ == 0);
}
size_t MemTable::ApproximateMemoryUsage() {
autovector<size_t> usages = {arena_.ApproximateMemoryUsage(),
table_->ApproximateMemoryUsage(),
range_del_table_->ApproximateMemoryUsage(),
rocksdb::ApproximateMemoryUsage(insert_hints_)};
size_t total_usage = 0;
for (size_t usage : usages) {
// If usage + total_usage >= kMaxSizet, return kMaxSizet.
// the following variation is to avoid numeric overflow.
if (usage >= port::kMaxSizet - total_usage) {
return port::kMaxSizet;
}
total_usage += usage;
Add a new mem-table representation based on cuckoo hash. Summary: = Major Changes = * Add a new mem-table representation, HashCuckooRep, which is based cuckoo hash. Cuckoo hash uses multiple hash functions. This allows each key to have multiple possible locations in the mem-table. - Put: When insert a key, it will try to find whether one of its possible locations is vacant and store the key. If none of its possible locations are available, then it will kick out a victim key and store at that location. The kicked-out victim key will then be stored at a vacant space of its possible locations or kick-out another victim. In this diff, the kick-out path (known as cuckoo-path) is found using BFS, which guarantees to be the shortest. - Get: Simply tries all possible locations of a key --- this guarantees worst-case constant time complexity. - Time complexity: O(1) for Get, and average O(1) for Put if the fullness of the mem-table is below 80%. - Default using two hash functions, the number of hash functions used by the cuckoo-hash may dynamically increase if it fails to find a short-enough kick-out path. - Currently, HashCuckooRep does not support iteration and snapshots, as our current main purpose of this is to optimize point access. = Minor Changes = * Add IsSnapshotSupported() to DB to indicate whether the current DB supports snapshots. If it returns false, then DB::GetSnapshot() will always return nullptr. Test Plan: Run existing tests. Will develop a test specifically for cuckoo hash in the next diff. Reviewers: sdong, haobo Reviewed By: sdong CC: leveldb, dhruba, igor Differential Revision: https://reviews.facebook.net/D16155
2014-04-30 00:13:46 +00:00
}
// otherwise, return the actual usage
return total_usage;
}
bool MemTable::ShouldFlushNow() const {
size_t write_buffer_size = write_buffer_size_.load(std::memory_order_relaxed);
// In a lot of times, we cannot allocate arena blocks that exactly matches the
// buffer size. Thus we have to decide if we should over-allocate or
// under-allocate.
// This constant variable can be interpreted as: if we still have more than
// "kAllowOverAllocationRatio * kArenaBlockSize" space left, we'd try to over
// allocate one more block.
const double kAllowOverAllocationRatio = 0.6;
// If arena still have room for new block allocation, we can safely say it
// shouldn't flush.
auto allocated_memory = table_->ApproximateMemoryUsage() +
range_del_table_->ApproximateMemoryUsage() +
arena_.MemoryAllocatedBytes();
// if we can still allocate one more block without exceeding the
// over-allocation ratio, then we should not flush.
if (allocated_memory + kArenaBlockSize <
write_buffer_size + kArenaBlockSize * kAllowOverAllocationRatio) {
return false;
}
// if user keeps adding entries that exceeds write_buffer_size, we need to
// flush earlier even though we still have much available memory left.
if (allocated_memory >
write_buffer_size + kArenaBlockSize * kAllowOverAllocationRatio) {
return true;
}
// In this code path, Arena has already allocated its "last block", which
// means the total allocatedmemory size is either:
// (1) "moderately" over allocated the memory (no more than `0.6 * arena
// block size`. Or,
// (2) the allocated memory is less than write buffer size, but we'll stop
// here since if we allocate a new arena block, we'll over allocate too much
// more (half of the arena block size) memory.
//
// In either case, to avoid over-allocate, the last block will stop allocation
// when its usage reaches a certain ratio, which we carefully choose "0.75
// full" as the stop condition because it addresses the following issue with
// great simplicity: What if the next inserted entry's size is
// bigger than AllocatedAndUnused()?
//
// The answer is: if the entry size is also bigger than 0.25 *
// kArenaBlockSize, a dedicated block will be allocated for it; otherwise
// arena will anyway skip the AllocatedAndUnused() and allocate a new, empty
// and regular block. In either case, we *overly* over-allocated.
//
// Therefore, setting the last block to be at most "0.75 full" avoids both
// cases.
//
// NOTE: the average percentage of waste space of this approach can be counted
// as: "arena block size * 0.25 / write buffer size". User who specify a small
// write buffer size and/or big arena block size may suffer.
return arena_.AllocatedAndUnused() < kArenaBlockSize / 4;
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
void MemTable::UpdateFlushState() {
auto state = flush_state_.load(std::memory_order_relaxed);
if (state == FLUSH_NOT_REQUESTED && ShouldFlushNow()) {
// ignore CAS failure, because that means somebody else requested
// a flush
flush_state_.compare_exchange_strong(state, FLUSH_REQUESTED,
std::memory_order_relaxed,
std::memory_order_relaxed);
}
}
void MemTable::UpdateOldestKeyTime() {
uint64_t oldest_key_time = oldest_key_time_.load(std::memory_order_relaxed);
if (oldest_key_time == std::numeric_limits<uint64_t>::max()) {
int64_t current_time = 0;
auto s = env_->GetCurrentTime(&current_time);
if (s.ok()) {
assert(current_time >= 0);
// If fail, the timestamp is already set.
oldest_key_time_.compare_exchange_strong(
oldest_key_time, static_cast<uint64_t>(current_time),
std::memory_order_relaxed, std::memory_order_relaxed);
}
}
}
int MemTable::KeyComparator::operator()(const char* prefix_len_key1,
const char* prefix_len_key2) const {
// Internal keys are encoded as length-prefixed strings.
Slice k1 = GetLengthPrefixedSlice(prefix_len_key1);
Slice k2 = GetLengthPrefixedSlice(prefix_len_key2);
return comparator.CompareKeySeq(k1, k2);
}
int MemTable::KeyComparator::operator()(const char* prefix_len_key,
const KeyComparator::DecodedType& key)
const {
// Internal keys are encoded as length-prefixed strings.
Slice a = GetLengthPrefixedSlice(prefix_len_key);
return comparator.CompareKeySeq(a, key);
}
void MemTableRep::InsertConcurrently(KeyHandle /*handle*/) {
#ifndef ROCKSDB_LITE
throw std::runtime_error("concurrent insert not supported");
#else
abort();
#endif
}
Slice MemTableRep::UserKey(const char* key) const {
Slice slice = GetLengthPrefixedSlice(key);
return Slice(slice.data(), slice.size() - 8);
}
KeyHandle MemTableRep::Allocate(const size_t len, char** buf) {
*buf = allocator_->Allocate(len);
return static_cast<KeyHandle>(*buf);
}
// Encode a suitable internal key target for "target" and return it.
// Uses *scratch as scratch space, and the returned pointer will point
// into this scratch space.
const char* EncodeKey(std::string* scratch, const Slice& target) {
scratch->clear();
PutVarint32(scratch, static_cast<uint32_t>(target.size()));
scratch->append(target.data(), target.size());
return scratch->data();
}
class MemTableIterator : public InternalIterator {
public:
Introduce FullMergeV2 (eliminate memcpy from merge operators) Summary: This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice> This diff is stacked on top of D56493 and D56511 In this diff we - Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future - Replace std::deque<std::string> with std::vector<Slice> to pass operands - Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187) - Allow FullMergeV2 output to be an existing operand ``` [Everything in Memtable | 10K operands | 10 KB each | 1 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s [master] readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s ``` ``` [Everything in Memtable | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s [master] readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 1 operand per key] [FullMergeV2] $ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s [master] readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions [FullMergeV2] readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s [master] readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s ``` Test Plan: COMPILE_WITH_ASAN=1 make check -j64 Reviewers: yhchiang, andrewkr, sdong Reviewed By: sdong Subscribers: lovro, andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 16:49:03 +00:00
MemTableIterator(const MemTable& mem, const ReadOptions& read_options,
Arena* arena, bool use_range_del_table = false)
: bloom_(nullptr),
prefix_extractor_(mem.prefix_extractor_),
comparator_(mem.comparator_),
valid_(false),
Introduce FullMergeV2 (eliminate memcpy from merge operators) Summary: This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice> This diff is stacked on top of D56493 and D56511 In this diff we - Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future - Replace std::deque<std::string> with std::vector<Slice> to pass operands - Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187) - Allow FullMergeV2 output to be an existing operand ``` [Everything in Memtable | 10K operands | 10 KB each | 1 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s [master] readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s ``` ``` [Everything in Memtable | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s [master] readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 1 operand per key] [FullMergeV2] $ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s [master] readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions [FullMergeV2] readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s [master] readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s ``` Test Plan: COMPILE_WITH_ASAN=1 make check -j64 Reviewers: yhchiang, andrewkr, sdong Reviewed By: sdong Subscribers: lovro, andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 16:49:03 +00:00
arena_mode_(arena != nullptr),
value_pinned_(
!mem.GetImmutableMemTableOptions()->inplace_update_support) {
if (use_range_del_table) {
iter_ = mem.range_del_table_->GetIterator(arena);
} else if (prefix_extractor_ != nullptr && !read_options.total_order_seek) {
bloom_ = mem.prefix_bloom_.get();
iter_ = mem.table_->GetDynamicPrefixIterator(arena);
} else {
iter_ = mem.table_->GetIterator(arena);
}
}
~MemTableIterator() {
#ifndef NDEBUG
// Assert that the MemTableIterator is never deleted while
// Pinning is Enabled.
assert(!pinned_iters_mgr_ || !pinned_iters_mgr_->PinningEnabled());
#endif
if (arena_mode_) {
iter_->~Iterator();
} else {
delete iter_;
}
}
#ifndef NDEBUG
virtual void SetPinnedItersMgr(
PinnedIteratorsManager* pinned_iters_mgr) override {
pinned_iters_mgr_ = pinned_iters_mgr;
}
PinnedIteratorsManager* pinned_iters_mgr_ = nullptr;
#endif
virtual bool Valid() const override { return valid_; }
virtual void Seek(const Slice& k) override {
PERF_TIMER_GUARD(seek_on_memtable_time);
PERF_COUNTER_ADD(seek_on_memtable_count, 1);
if (bloom_ != nullptr) {
if (!bloom_->MayContain(
prefix_extractor_->Transform(ExtractUserKey(k)))) {
PERF_COUNTER_ADD(bloom_memtable_miss_count, 1);
valid_ = false;
return;
} else {
PERF_COUNTER_ADD(bloom_memtable_hit_count, 1);
}
}
iter_->Seek(k, nullptr);
valid_ = iter_->Valid();
}
virtual void SeekForPrev(const Slice& k) override {
PERF_TIMER_GUARD(seek_on_memtable_time);
PERF_COUNTER_ADD(seek_on_memtable_count, 1);
if (bloom_ != nullptr) {
if (!bloom_->MayContain(
prefix_extractor_->Transform(ExtractUserKey(k)))) {
PERF_COUNTER_ADD(bloom_memtable_miss_count, 1);
valid_ = false;
return;
} else {
PERF_COUNTER_ADD(bloom_memtable_hit_count, 1);
}
}
iter_->Seek(k, nullptr);
valid_ = iter_->Valid();
if (!Valid()) {
SeekToLast();
}
while (Valid() && comparator_.comparator.Compare(k, key()) < 0) {
Prev();
}
}
virtual void SeekToFirst() override {
iter_->SeekToFirst();
valid_ = iter_->Valid();
}
virtual void SeekToLast() override {
iter_->SeekToLast();
valid_ = iter_->Valid();
}
virtual void Next() override {
PERF_COUNTER_ADD(next_on_memtable_count, 1);
assert(Valid());
iter_->Next();
valid_ = iter_->Valid();
}
virtual void Prev() override {
PERF_COUNTER_ADD(prev_on_memtable_count, 1);
assert(Valid());
iter_->Prev();
valid_ = iter_->Valid();
}
virtual Slice key() const override {
assert(Valid());
return GetLengthPrefixedSlice(iter_->key());
}
virtual Slice value() const override {
assert(Valid());
Slice key_slice = GetLengthPrefixedSlice(iter_->key());
return GetLengthPrefixedSlice(key_slice.data() + key_slice.size());
}
virtual Status status() const override { return Status::OK(); }
Introduce ReadOptions::pin_data (support zero copy for keys) Summary: This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed. Benchmark results (using https://phabricator.fb.com/P20083553) ``` // $ du -h /home/tec/local/normal.4K.Snappy/db10077 // 6.1G /home/tec/local/normal.4K.Snappy/db10077 // $ du -h /home/tec/local/zero.8K.LZ4/db10077 // 6.4G /home/tec/local/zero.8K.LZ4/db10077 // Benchmarks for shard db10077 // _build/opt/rocks/benchmark/rocks_copy_benchmark \ // --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \ // --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077" // First run // ============================================================================ // rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s // ============================================================================ // BM_StringCopy 1.73s 576.97m // BM_StringPiece 103.74% 1.67s 598.55m // ============================================================================ // Match rate : 1000000 / 1000000 // Second run // ============================================================================ // rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s // ============================================================================ // BM_StringCopy 611.99ms 1.63 // BM_StringPiece 203.76% 300.35ms 3.33 // ============================================================================ // Match rate : 1000000 / 1000000 ``` Test Plan: Unit tests Reviewers: sdong, igor, anthony, yhchiang, rven Reviewed By: rven Subscribers: dhruba, lovro, adsharma Differential Revision: https://reviews.facebook.net/D48999
2015-12-16 20:08:30 +00:00
virtual bool IsKeyPinned() const override {
// memtable data is always pinned
return true;
}
Introduce FullMergeV2 (eliminate memcpy from merge operators) Summary: This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice> This diff is stacked on top of D56493 and D56511 In this diff we - Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future - Replace std::deque<std::string> with std::vector<Slice> to pass operands - Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187) - Allow FullMergeV2 output to be an existing operand ``` [Everything in Memtable | 10K operands | 10 KB each | 1 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s [master] readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s ``` ``` [Everything in Memtable | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s [master] readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 1 operand per key] [FullMergeV2] $ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s [master] readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions [FullMergeV2] readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s [master] readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s ``` Test Plan: COMPILE_WITH_ASAN=1 make check -j64 Reviewers: yhchiang, andrewkr, sdong Reviewed By: sdong Subscribers: lovro, andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 16:49:03 +00:00
virtual bool IsValuePinned() const override {
// memtable value is always pinned, except if we allow inplace update.
return value_pinned_;
}
private:
DynamicBloom* bloom_;
const SliceTransform* const prefix_extractor_;
const MemTable::KeyComparator comparator_;
MemTableRep::Iterator* iter_;
bool valid_;
bool arena_mode_;
Introduce FullMergeV2 (eliminate memcpy from merge operators) Summary: This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice> This diff is stacked on top of D56493 and D56511 In this diff we - Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future - Replace std::deque<std::string> with std::vector<Slice> to pass operands - Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187) - Allow FullMergeV2 output to be an existing operand ``` [Everything in Memtable | 10K operands | 10 KB each | 1 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s [master] readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s ``` ``` [Everything in Memtable | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s [master] readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 1 operand per key] [FullMergeV2] $ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s [master] readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions [FullMergeV2] readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s [master] readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s ``` Test Plan: COMPILE_WITH_ASAN=1 make check -j64 Reviewers: yhchiang, andrewkr, sdong Reviewed By: sdong Subscribers: lovro, andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 16:49:03 +00:00
bool value_pinned_;
// No copying allowed
MemTableIterator(const MemTableIterator&);
void operator=(const MemTableIterator&);
};
InternalIterator* MemTable::NewIterator(const ReadOptions& read_options,
Arena* arena) {
assert(arena != nullptr);
auto mem = arena->AllocateAligned(sizeof(MemTableIterator));
return new (mem) MemTableIterator(*this, read_options, arena);
}
FragmentedRangeTombstoneIterator* MemTable::NewRangeTombstoneIterator(
const ReadOptions& read_options, SequenceNumber read_seq) {
if (read_options.ignore_range_deletions || is_range_del_table_empty_) {
return nullptr;
}
auto* unfragmented_iter = new MemTableIterator(
*this, read_options, nullptr /* arena */, true /* use_range_del_table */);
if (unfragmented_iter == nullptr) {
return nullptr;
}
auto fragmented_tombstone_list =
std::make_shared<FragmentedRangeTombstoneList>(
std::unique_ptr<InternalIterator>(unfragmented_iter),
comparator_.comparator);
auto* fragmented_iter = new FragmentedRangeTombstoneIterator(
fragmented_tombstone_list, comparator_.comparator, read_seq);
return fragmented_iter;
}
port::RWMutex* MemTable::GetLock(const Slice& key) {
static murmur_hash hash;
return &locks_[hash(key) % locks_.size()];
}
MemTable::MemTableStats MemTable::ApproximateStats(const Slice& start_ikey,
const Slice& end_ikey) {
uint64_t entry_count = table_->ApproximateNumEntries(start_ikey, end_ikey);
entry_count += range_del_table_->ApproximateNumEntries(start_ikey, end_ikey);
if (entry_count == 0) {
return {0, 0};
}
uint64_t n = num_entries_.load(std::memory_order_relaxed);
if (n == 0) {
return {0, 0};
}
if (entry_count > n) {
// (range_del_)table_->ApproximateNumEntries() is just an estimate so it can
// be larger than actual entries we have. Cap it to entries we have to limit
// the inaccuracy.
entry_count = n;
}
uint64_t data_size = data_size_.load(std::memory_order_relaxed);
return {entry_count * (data_size / n), entry_count};
}
bool MemTable::Add(SequenceNumber s, ValueType type,
const Slice& key, /* user key */
const Slice& value, bool allow_concurrent,
MemTablePostProcessInfo* post_process_info) {
// Format of an entry is concatenation of:
// key_size : varint32 of internal_key.size()
// key bytes : char[internal_key.size()]
// value_size : varint32 of value.size()
// value bytes : char[value.size()]
uint32_t key_size = static_cast<uint32_t>(key.size());
uint32_t val_size = static_cast<uint32_t>(value.size());
uint32_t internal_key_size = key_size + 8;
const uint32_t encoded_len = VarintLength(internal_key_size) +
internal_key_size + VarintLength(val_size) +
val_size;
char* buf = nullptr;
std::unique_ptr<MemTableRep>& table =
type == kTypeRangeDeletion ? range_del_table_ : table_;
KeyHandle handle = table->Allocate(encoded_len, &buf);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
char* p = EncodeVarint32(buf, internal_key_size);
memcpy(p, key.data(), key_size);
Slice key_slice(p, key_size);
p += key_size;
uint64_t packed = PackSequenceAndType(s, type);
EncodeFixed64(p, packed);
p += 8;
p = EncodeVarint32(p, val_size);
memcpy(p, value.data(), val_size);
assert((unsigned)(p + val_size - buf) == (unsigned)encoded_len);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (!allow_concurrent) {
// Extract prefix for insert with hint.
if (insert_with_hint_prefix_extractor_ != nullptr &&
insert_with_hint_prefix_extractor_->InDomain(key_slice)) {
Slice prefix = insert_with_hint_prefix_extractor_->Transform(key_slice);
bool res = table->InsertKeyWithHint(handle, &insert_hints_[prefix]);
if (UNLIKELY(!res)) {
return res;
}
} else {
bool res = table->InsertKey(handle);
if (UNLIKELY(!res)) {
return res;
}
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
// this is a bit ugly, but is the way to avoid locked instructions
// when incrementing an atomic
num_entries_.store(num_entries_.load(std::memory_order_relaxed) + 1,
std::memory_order_relaxed);
data_size_.store(data_size_.load(std::memory_order_relaxed) + encoded_len,
std::memory_order_relaxed);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (type == kTypeDeletion) {
num_deletes_.store(num_deletes_.load(std::memory_order_relaxed) + 1,
std::memory_order_relaxed);
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (prefix_bloom_) {
assert(prefix_extractor_);
prefix_bloom_->Add(prefix_extractor_->Transform(key));
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
// The first sequence number inserted into the memtable
assert(first_seqno_ == 0 || s >= first_seqno_);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (first_seqno_ == 0) {
first_seqno_.store(s, std::memory_order_relaxed);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (earliest_seqno_ == kMaxSequenceNumber) {
earliest_seqno_.store(GetFirstSequenceNumber(),
std::memory_order_relaxed);
}
assert(first_seqno_.load() >= earliest_seqno_.load());
}
assert(post_process_info == nullptr);
UpdateFlushState();
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
} else {
bool res = table->InsertKeyConcurrently(handle);
if (UNLIKELY(!res)) {
return res;
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
assert(post_process_info != nullptr);
post_process_info->num_entries++;
post_process_info->data_size += encoded_len;
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
if (type == kTypeDeletion) {
post_process_info->num_deletes++;
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
}
if (prefix_bloom_) {
assert(prefix_extractor_);
prefix_bloom_->AddConcurrently(prefix_extractor_->Transform(key));
}
// atomically update first_seqno_ and earliest_seqno_.
uint64_t cur_seq_num = first_seqno_.load(std::memory_order_relaxed);
while ((cur_seq_num == 0 || s < cur_seq_num) &&
!first_seqno_.compare_exchange_weak(cur_seq_num, s)) {
}
uint64_t cur_earliest_seqno =
earliest_seqno_.load(std::memory_order_relaxed);
while (
(cur_earliest_seqno == kMaxSequenceNumber || s < cur_earliest_seqno) &&
!first_seqno_.compare_exchange_weak(cur_earliest_seqno, s)) {
}
}
if (is_range_del_table_empty_ && type == kTypeRangeDeletion) {
is_range_del_table_empty_ = false;
}
UpdateOldestKeyTime();
return true;
}
// Callback from MemTable::Get()
namespace {
struct Saver {
Status* status;
const LookupKey* key;
bool* found_final_value; // Is value set correctly? Used by KeyMayExist
bool* merge_in_progress;
std::string* value;
SequenceNumber seq;
const MergeOperator* merge_operator;
// the merge operations encountered;
MergeContext* merge_context;
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
SequenceNumber max_covering_tombstone_seq;
MemTable* mem;
Logger* logger;
Statistics* statistics;
bool inplace_update_support;
Env* env_;
ReadCallback* callback_;
bool* is_blob_index;
bool CheckCallback(SequenceNumber _seq) {
if (callback_) {
return callback_->IsVisible(_seq);
}
return true;
}
};
} // namespace
static bool SaveValue(void* arg, const char* entry) {
Saver* s = reinterpret_cast<Saver*>(arg);
assert(s != nullptr);
MergeContext* merge_context = s->merge_context;
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
SequenceNumber max_covering_tombstone_seq = s->max_covering_tombstone_seq;
const MergeOperator* merge_operator = s->merge_operator;
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
assert(merge_context != nullptr);
// entry format is:
// klength varint32
// userkey char[klength-8]
// tag uint64
// vlength varint32
// value char[vlength]
// Check that it belongs to same user key. We do not check the
// sequence number since the Seek() call above should have skipped
// all entries with overly large sequence numbers.
uint32_t key_length;
const char* key_ptr = GetVarint32Ptr(entry, entry + 5, &key_length);
if (s->mem->GetInternalKeyComparator().user_comparator()->Equal(
Slice(key_ptr, key_length - 8), s->key->user_key())) {
// Correct user key
const uint64_t tag = DecodeFixed64(key_ptr + key_length - 8);
ValueType type;
SequenceNumber seq;
UnPackSequenceAndType(tag, &seq, &type);
// If the value is not in the snapshot, skip it
if (!s->CheckCallback(seq)) {
return true; // to continue to the next seq
}
s->seq = seq;
if ((type == kTypeValue || type == kTypeMerge || type == kTypeBlobIndex) &&
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
max_covering_tombstone_seq > seq) {
type = kTypeRangeDeletion;
}
switch (type) {
case kTypeBlobIndex:
if (s->is_blob_index == nullptr) {
ROCKS_LOG_ERROR(s->logger, "Encounter unexpected blob index.");
*(s->status) = Status::NotSupported(
"Encounter unsupported blob value. Please open DB with "
"rocksdb::blob_db::BlobDB instead.");
} else if (*(s->merge_in_progress)) {
*(s->status) =
Status::NotSupported("Blob DB does not support merge operator.");
}
if (!s->status->ok()) {
*(s->found_final_value) = true;
return false;
}
FALLTHROUGH_INTENDED;
case kTypeValue: {
if (s->inplace_update_support) {
s->mem->GetLock(s->key->user_key())->ReadLock();
}
Slice v = GetLengthPrefixedSlice(key_ptr + key_length);
*(s->status) = Status::OK();
if (*(s->merge_in_progress)) {
if (s->value != nullptr) {
*(s->status) = MergeHelper::TimedFullMerge(
merge_operator, s->key->user_key(), &v,
merge_context->GetOperands(), s->value, s->logger,
s->statistics, s->env_, nullptr /* result_operand */, true);
}
} else if (s->value != nullptr) {
s->value->assign(v.data(), v.size());
}
if (s->inplace_update_support) {
s->mem->GetLock(s->key->user_key())->ReadUnlock();
}
*(s->found_final_value) = true;
if (s->is_blob_index != nullptr) {
*(s->is_blob_index) = (type == kTypeBlobIndex);
}
return false;
}
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 18:42:56 +00:00
case kTypeDeletion:
case kTypeSingleDeletion:
case kTypeRangeDeletion: {
if (*(s->merge_in_progress)) {
if (s->value != nullptr) {
*(s->status) = MergeHelper::TimedFullMerge(
merge_operator, s->key->user_key(), nullptr,
merge_context->GetOperands(), s->value, s->logger,
s->statistics, s->env_, nullptr /* result_operand */, true);
}
} else {
*(s->status) = Status::NotFound();
}
*(s->found_final_value) = true;
return false;
}
case kTypeMerge: {
if (!merge_operator) {
*(s->status) = Status::InvalidArgument(
"merge_operator is not properly initialized.");
// Normally we continue the loop (return true) when we see a merge
// operand. But in case of an error, we should stop the loop
// immediately and pretend we have found the value to stop further
// seek. Otherwise, the later call will override this error status.
*(s->found_final_value) = true;
return false;
}
Slice v = GetLengthPrefixedSlice(key_ptr + key_length);
*(s->merge_in_progress) = true;
Introduce FullMergeV2 (eliminate memcpy from merge operators) Summary: This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice> This diff is stacked on top of D56493 and D56511 In this diff we - Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future - Replace std::deque<std::string> with std::vector<Slice> to pass operands - Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187) - Allow FullMergeV2 output to be an existing operand ``` [Everything in Memtable | 10K operands | 10 KB each | 1 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s [master] readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s ``` ``` [Everything in Memtable | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000 [FullMergeV2] readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s [master] readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 1 operand per key] [FullMergeV2] $ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s [master] readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s ``` ``` [Everything in Block cache | 10K operands | 10 KB each | 10 operand per key] DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions [FullMergeV2] readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s [master] readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s ``` Test Plan: COMPILE_WITH_ASAN=1 make check -j64 Reviewers: yhchiang, andrewkr, sdong Reviewed By: sdong Subscribers: lovro, andrewkr, dhruba Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 16:49:03 +00:00
merge_context->PushOperand(
v, s->inplace_update_support == false /* operand_pinned */);
if (merge_operator->ShouldMerge(merge_context->GetOperandsDirectionBackward())) {
Introduce conditional merge-operator invocation in point lookups Summary: For every merge operand encountered for a key in the read path we now have the ability to decide whether to look further (to retrieve more merge operands for the key) or stop and invoke the merge operator to return the value. The user needs to override `ShouldMerge()` method with a condition to terminate search when true to avail this facility. This has a couple of advantages: 1. It helps in limiting the number of merge operands that are looked at to compute a value as part of a user Get operation. 2. It allows to peek at a merge key-value to see if further merge operands need to look at. Example: Limiting the number of merge operands that are looked at: Lets say you have 10 merge operands for a key spread over various levels. If you only want RocksDB to look at the latest two merge operands instead of all 10 to compute the value, it is now possible with this PR. You can set the condition in `ShouldMerge()` to return true when the size of the operand list is 2. Look at the example implementation in the unit test. Without this PR, a Get might look at all the 10 merge operands in different levels before invoking the merge-operator. Added a new unit test. Made sure that there is no perf regression by running benchmarks. Command line to Load data: ``` TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="mergerandom" --merge_operator="uint64add" --num=10000000 ... mergerandom : 12.861 micros/op 77757 ops/sec; 8.6 MB/s ( updates:10000000) ``` **ReadRandomMergeRandom bechmark results:** Command line: ``` TEST_TMPDIR=/dev/shm ./db_bench --benchmarks="readrandommergerandom" --merge_operator="uint64add" --num=10000000 ``` Base -- Without this code change (on commit fc7476b): ``` readrandommergerandom : 38.586 micros/op 25916 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8) ``` With this code change: ``` readrandommergerandom : 38.653 micros/op 25870 ops/sec; (reads:3001599 merges:6998401 total:10000000 hits:842235 maxlength:8) ``` Closes https://github.com/facebook/rocksdb/pull/2923 Differential Revision: D5898239 Pulled By: sagar0 fbshipit-source-id: daefa325019f77968639a75c851d46352c2303ef
2017-09-28 22:49:05 +00:00
*(s->status) = MergeHelper::TimedFullMerge(
merge_operator, s->key->user_key(), nullptr,
merge_context->GetOperands(), s->value, s->logger, s->statistics,
s->env_, nullptr /* result_operand */, true);
*(s->found_final_value) = true;
return false;
}
return true;
}
default:
assert(false);
return true;
}
}
// s->state could be Corrupt, merge or notfound
return false;
}
bool MemTable::Get(const LookupKey& key, std::string* value, Status* s,
MergeContext* merge_context,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
SequenceNumber* max_covering_tombstone_seq,
SequenceNumber* seq, const ReadOptions& read_opts,
ReadCallback* callback, bool* is_blob_index) {
// The sequence number is updated synchronously in version_set.h
if (IsEmpty()) {
// Avoiding recording stats for speed.
return false;
}
PERF_TIMER_GUARD(get_from_memtable_time);
std::unique_ptr<FragmentedRangeTombstoneIterator> range_del_iter(
NewRangeTombstoneIterator(read_opts,
GetInternalKeySeqno(key.internal_key())));
if (range_del_iter != nullptr) {
*max_covering_tombstone_seq =
std::max(*max_covering_tombstone_seq,
range_del_iter->MaxCoveringTombstoneSeqnum(key.user_key()));
}
Slice user_key = key.user_key();
bool found_final_value = false;
bool merge_in_progress = s->IsMergeInProgress();
bool const may_contain =
nullptr == prefix_bloom_
? false
: prefix_bloom_->MayContain(prefix_extractor_->Transform(user_key));
if (prefix_bloom_ && !may_contain) {
// iter is null if prefix bloom says the key does not exist
PERF_COUNTER_ADD(bloom_memtable_miss_count, 1);
*seq = kMaxSequenceNumber;
} else {
if (prefix_bloom_) {
PERF_COUNTER_ADD(bloom_memtable_hit_count, 1);
}
Saver saver;
saver.status = s;
saver.found_final_value = &found_final_value;
saver.merge_in_progress = &merge_in_progress;
saver.key = &key;
saver.value = value;
saver.seq = kMaxSequenceNumber;
saver.mem = this;
saver.merge_context = merge_context;
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
saver.max_covering_tombstone_seq = *max_covering_tombstone_seq;
saver.merge_operator = moptions_.merge_operator;
saver.logger = moptions_.info_log;
saver.inplace_update_support = moptions_.inplace_update_support;
saver.statistics = moptions_.statistics;
saver.env_ = env_;
saver.callback_ = callback;
saver.is_blob_index = is_blob_index;
table_->Get(key, &saver, SaveValue);
*seq = saver.seq;
}
[RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences. Summary: Here are the major changes to the Merge Interface. It has been expanded to handle cases where the MergeOperator is not associative. It does so by stacking up merge operations while scanning through the key history (i.e.: during Get() or Compaction), until a valid Put/Delete/end-of-history is encountered; it then applies all of the merge operations in the correct sequence starting with the base/sentinel value. I have also introduced an "AssociativeMerge" function which allows the user to take advantage of associative merge operations (such as in the case of counters). The implementation will always attempt to merge the operations/operands themselves together when they are encountered, and will resort to the "stacking" method if and only if the "associative-merge" fails. This implementation is conjectured to allow MergeOperator to handle the general case, while still providing the user with the ability to take advantage of certain efficiencies in their own merge-operator / data-structure. NOTE: This is a preliminary diff. This must still go through a lot of review, revision, and testing. Feedback welcome! Test Plan: -This is a preliminary diff. I have only just begun testing/debugging it. -I will be testing this with the existing MergeOperator use-cases and unit-tests (counters, string-append, and redis-lists) -I will be "desk-checking" and walking through the code with the help gdb. -I will find a way of stress-testing the new interface / implementation using db_bench, db_test, merge_test, and/or db_stress. -I will ensure that my tests cover all cases: Get-Memtable, Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0, Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found, end-of-history, end-of-file, etc. -A lot of feedback from the reviewers. Reviewers: haobo, dhruba, zshao, emayanke Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D11499
2013-08-06 03:14:32 +00:00
// No change to value, since we have not yet found a Put/Delete
if (!found_final_value && merge_in_progress) {
*s = Status::MergeInProgress();
}
PERF_COUNTER_ADD(get_from_memtable_count, 1);
return found_final_value;
}
void MemTable::Update(SequenceNumber seq,
const Slice& key,
const Slice& value) {
LookupKey lkey(key, seq);
Slice mem_key = lkey.memtable_key();
std::unique_ptr<MemTableRep::Iterator> iter(
table_->GetDynamicPrefixIterator());
iter->Seek(lkey.internal_key(), mem_key.data());
if (iter->Valid()) {
// entry format is:
// key_length varint32
// userkey char[klength-8]
// tag uint64
// vlength varint32
// value char[vlength]
// Check that it belongs to same user key. We do not check the
// sequence number since the Seek() call above should have skipped
// all entries with overly large sequence numbers.
const char* entry = iter->key();
uint32_t key_length = 0;
const char* key_ptr = GetVarint32Ptr(entry, entry + 5, &key_length);
if (comparator_.comparator.user_comparator()->Equal(
Slice(key_ptr, key_length - 8), lkey.user_key())) {
// Correct user key
const uint64_t tag = DecodeFixed64(key_ptr + key_length - 8);
ValueType type;
SequenceNumber existing_seq;
UnPackSequenceAndType(tag, &existing_seq, &type);
assert(existing_seq != seq);
if (type == kTypeValue) {
Slice prev_value = GetLengthPrefixedSlice(key_ptr + key_length);
uint32_t prev_size = static_cast<uint32_t>(prev_value.size());
uint32_t new_size = static_cast<uint32_t>(value.size());
// Update value, if new value size <= previous value size
if (new_size <= prev_size) {
char* p =
EncodeVarint32(const_cast<char*>(key_ptr) + key_length, new_size);
WriteLock wl(GetLock(lkey.user_key()));
memcpy(p, value.data(), value.size());
assert((unsigned)((p + value.size()) - entry) ==
(unsigned)(VarintLength(key_length) + key_length +
VarintLength(value.size()) + value.size()));
RecordTick(moptions_.statistics, NUMBER_KEYS_UPDATED);
return;
}
}
}
}
// key doesn't exist
bool add_res __attribute__((__unused__));
add_res = Add(seq, kTypeValue, key, value);
// We already checked unused != seq above. In that case, Add should not fail.
assert(add_res);
}
bool MemTable::UpdateCallback(SequenceNumber seq,
const Slice& key,
const Slice& delta) {
LookupKey lkey(key, seq);
Slice memkey = lkey.memtable_key();
std::unique_ptr<MemTableRep::Iterator> iter(
table_->GetDynamicPrefixIterator());
iter->Seek(lkey.internal_key(), memkey.data());
if (iter->Valid()) {
// entry format is:
// key_length varint32
// userkey char[klength-8]
// tag uint64
// vlength varint32
// value char[vlength]
// Check that it belongs to same user key. We do not check the
// sequence number since the Seek() call above should have skipped
// all entries with overly large sequence numbers.
const char* entry = iter->key();
uint32_t key_length = 0;
const char* key_ptr = GetVarint32Ptr(entry, entry + 5, &key_length);
if (comparator_.comparator.user_comparator()->Equal(
Slice(key_ptr, key_length - 8), lkey.user_key())) {
// Correct user key
const uint64_t tag = DecodeFixed64(key_ptr + key_length - 8);
ValueType type;
uint64_t unused;
UnPackSequenceAndType(tag, &unused, &type);
switch (type) {
case kTypeValue: {
Slice prev_value = GetLengthPrefixedSlice(key_ptr + key_length);
uint32_t prev_size = static_cast<uint32_t>(prev_value.size());
char* prev_buffer = const_cast<char*>(prev_value.data());
uint32_t new_prev_size = prev_size;
std::string str_value;
WriteLock wl(GetLock(lkey.user_key()));
auto status = moptions_.inplace_callback(prev_buffer, &new_prev_size,
delta, &str_value);
if (status == UpdateStatus::UPDATED_INPLACE) {
// Value already updated by callback.
assert(new_prev_size <= prev_size);
if (new_prev_size < prev_size) {
// overwrite the new prev_size
char* p = EncodeVarint32(const_cast<char*>(key_ptr) + key_length,
new_prev_size);
if (VarintLength(new_prev_size) < VarintLength(prev_size)) {
// shift the value buffer as well.
memcpy(p, prev_buffer, new_prev_size);
}
}
RecordTick(moptions_.statistics, NUMBER_KEYS_UPDATED);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
UpdateFlushState();
return true;
} else if (status == UpdateStatus::UPDATED) {
Add(seq, kTypeValue, key, Slice(str_value));
RecordTick(moptions_.statistics, NUMBER_KEYS_WRITTEN);
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
UpdateFlushState();
return true;
} else if (status == UpdateStatus::UPDATE_FAILED) {
// No action required. Return.
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
UpdateFlushState();
return true;
}
}
default:
break;
}
}
}
// If the latest value is not kTypeValue
// or key doesn't exist
return false;
}
size_t MemTable::CountSuccessiveMergeEntries(const LookupKey& key) {
Slice memkey = key.memtable_key();
// A total ordered iterator is costly for some memtablerep (prefix aware
// reps). By passing in the user key, we allow efficient iterator creation.
// The iterator only needs to be ordered within the same user key.
std::unique_ptr<MemTableRep::Iterator> iter(
table_->GetDynamicPrefixIterator());
iter->Seek(key.internal_key(), memkey.data());
size_t num_successive_merges = 0;
for (; iter->Valid(); iter->Next()) {
const char* entry = iter->key();
uint32_t key_length = 0;
const char* iter_key_ptr = GetVarint32Ptr(entry, entry + 5, &key_length);
if (!comparator_.comparator.user_comparator()->Equal(
Slice(iter_key_ptr, key_length - 8), key.user_key())) {
break;
}
const uint64_t tag = DecodeFixed64(iter_key_ptr + key_length - 8);
ValueType type;
uint64_t unused;
UnPackSequenceAndType(tag, &unused, &type);
if (type != kTypeMerge) {
break;
}
++num_successive_merges;
}
return num_successive_merges;
}
void MemTableRep::Get(const LookupKey& k, void* callback_args,
bool (*callback_func)(void* arg, const char* entry)) {
auto iter = GetDynamicPrefixIterator();
for (iter->Seek(k.internal_key(), k.memtable_key().data());
iter->Valid() && callback_func(callback_args, iter->key());
iter->Next()) {
}
}
void MemTable::RefLogContainingPrepSection(uint64_t log) {
assert(log > 0);
auto cur = min_prep_log_referenced_.load();
while ((log < cur || cur == 0) &&
!min_prep_log_referenced_.compare_exchange_strong(cur, log)) {
cur = min_prep_log_referenced_.load();
}
}
uint64_t MemTable::GetMinLogContainingPrepSection() {
return min_prep_log_referenced_.load();
}
} // namespace rocksdb