rocksdb/port/port_posix.cc

209 lines
5.5 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "port/port_posix.h"
#include <assert.h>
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
#if defined(__i386__) || defined(__x86_64__)
#include <cpuid.h>
#endif
#include <errno.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <unistd.h>
#include <cstdlib>
#include "util/logging.h"
namespace rocksdb {
namespace port {
static int PthreadCall(const char* label, int result) {
if (result != 0 && result != ETIMEDOUT) {
fprintf(stderr, "pthread %s: %s\n", label, strerror(result));
abort();
}
return result;
}
Mutex::Mutex(bool adaptive) {
(void) adaptive;
#ifdef ROCKSDB_PTHREAD_ADAPTIVE_MUTEX
if (!adaptive) {
PthreadCall("init mutex", pthread_mutex_init(&mu_, nullptr));
} else {
pthread_mutexattr_t mutex_attr;
PthreadCall("init mutex attr", pthread_mutexattr_init(&mutex_attr));
PthreadCall("set mutex attr",
pthread_mutexattr_settype(&mutex_attr,
PTHREAD_MUTEX_ADAPTIVE_NP));
PthreadCall("init mutex", pthread_mutex_init(&mu_, &mutex_attr));
PthreadCall("destroy mutex attr",
pthread_mutexattr_destroy(&mutex_attr));
}
#else
PthreadCall("init mutex", pthread_mutex_init(&mu_, nullptr));
#endif // ROCKSDB_PTHREAD_ADAPTIVE_MUTEX
}
Mutex::~Mutex() { PthreadCall("destroy mutex", pthread_mutex_destroy(&mu_)); }
void Mutex::Lock() {
PthreadCall("lock", pthread_mutex_lock(&mu_));
#ifndef NDEBUG
locked_ = true;
#endif
}
void Mutex::Unlock() {
#ifndef NDEBUG
locked_ = false;
#endif
PthreadCall("unlock", pthread_mutex_unlock(&mu_));
}
void Mutex::AssertHeld() {
#ifndef NDEBUG
assert(locked_);
#endif
}
CondVar::CondVar(Mutex* mu)
: mu_(mu) {
PthreadCall("init cv", pthread_cond_init(&cv_, nullptr));
}
CondVar::~CondVar() { PthreadCall("destroy cv", pthread_cond_destroy(&cv_)); }
void CondVar::Wait() {
#ifndef NDEBUG
mu_->locked_ = false;
#endif
PthreadCall("wait", pthread_cond_wait(&cv_, &mu_->mu_));
#ifndef NDEBUG
mu_->locked_ = true;
#endif
}
bool CondVar::TimedWait(uint64_t abs_time_us) {
struct timespec ts;
ts.tv_sec = static_cast<time_t>(abs_time_us / 1000000);
ts.tv_nsec = static_cast<suseconds_t>((abs_time_us % 1000000) * 1000);
#ifndef NDEBUG
mu_->locked_ = false;
#endif
int err = pthread_cond_timedwait(&cv_, &mu_->mu_, &ts);
#ifndef NDEBUG
mu_->locked_ = true;
#endif
if (err == ETIMEDOUT) {
return true;
}
if (err != 0) {
PthreadCall("timedwait", err);
}
return false;
}
void CondVar::Signal() {
PthreadCall("signal", pthread_cond_signal(&cv_));
}
void CondVar::SignalAll() {
PthreadCall("broadcast", pthread_cond_broadcast(&cv_));
}
RWMutex::RWMutex() {
PthreadCall("init mutex", pthread_rwlock_init(&mu_, nullptr));
}
RWMutex::~RWMutex() { PthreadCall("destroy mutex", pthread_rwlock_destroy(&mu_)); }
void RWMutex::ReadLock() { PthreadCall("read lock", pthread_rwlock_rdlock(&mu_)); }
void RWMutex::WriteLock() { PthreadCall("write lock", pthread_rwlock_wrlock(&mu_)); }
void RWMutex::ReadUnlock() { PthreadCall("read unlock", pthread_rwlock_unlock(&mu_)); }
void RWMutex::WriteUnlock() { PthreadCall("write unlock", pthread_rwlock_unlock(&mu_)); }
int PhysicalCoreID() {
#if defined(ROCKSDB_SCHED_GETCPU_PRESENT) && defined(__x86_64__) && \
(__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 22))
// sched_getcpu uses VDSO getcpu() syscall since 2.22. I believe Linux offers VDSO
// support only on x86_64. This is the fastest/preferred method if available.
int cpuno = sched_getcpu();
if (cpuno < 0) {
return -1;
}
return cpuno;
#elif defined(__x86_64__) || defined(__i386__)
// clang/gcc both provide cpuid.h, which defines __get_cpuid(), for x86_64 and i386.
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
unsigned eax, ebx = 0, ecx, edx;
if (!__get_cpuid(1, &eax, &ebx, &ecx, &edx)) {
return -1;
}
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
return ebx >> 24;
#else
// give up, the caller can generate a random number or something.
return -1;
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
#endif
}
void InitOnce(OnceType* once, void (*initializer)()) {
PthreadCall("once", pthread_once(once, initializer));
}
void Crash(const std::string& srcfile, int srcline) {
fprintf(stdout, "Crashing at %s:%d\n", srcfile.c_str(), srcline);
fflush(stdout);
kill(getpid(), SIGTERM);
}
int GetMaxOpenFiles() {
#if defined(RLIMIT_NOFILE)
struct rlimit no_files_limit;
if (getrlimit(RLIMIT_NOFILE, &no_files_limit) != 0) {
return -1;
}
// protect against overflow
if (no_files_limit.rlim_cur >= std::numeric_limits<int>::max()) {
return std::numeric_limits<int>::max();
}
return static_cast<int>(no_files_limit.rlim_cur);
#endif
return -1;
}
void *cacheline_aligned_alloc(size_t size) {
#if __GNUC__ < 5 && defined(__SANITIZE_ADDRESS__)
return malloc(size);
#elif defined(_ISOC11_SOURCE)
return aligned_alloc(CACHE_LINE_SIZE, size);
#elif ( _POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600 || defined(__APPLE__))
void *m;
errno = posix_memalign(&m, CACHE_LINE_SIZE, size);
return errno ? nullptr : m;
#else
return malloc(size);
#endif
}
void cacheline_aligned_free(void *memblock) {
free(memblock);
}
} // namespace port
} // namespace rocksdb