Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
|
|
|
|
#include "db/blob/blob_file_reader.h"
|
|
|
|
|
|
|
|
#include <cassert>
|
|
|
|
#include <string>
|
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
#include "db/blob/blob_contents.h"
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
#include "db/blob/blob_log_format.h"
|
|
|
|
#include "db/blob/blob_log_writer.h"
|
|
|
|
#include "env/mock_env.h"
|
|
|
|
#include "file/filename.h"
|
|
|
|
#include "file/read_write_util.h"
|
|
|
|
#include "file/writable_file_writer.h"
|
|
|
|
#include "options/cf_options.h"
|
|
|
|
#include "rocksdb/env.h"
|
|
|
|
#include "rocksdb/file_system.h"
|
|
|
|
#include "rocksdb/options.h"
|
2020-10-15 20:02:44 +00:00
|
|
|
#include "test_util/sync_point.h"
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
#include "test_util/testharness.h"
|
|
|
|
#include "util/compression.h"
|
|
|
|
#include "utilities/fault_injection_env.h"
|
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
|
|
|
|
namespace {
|
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
// Creates a test blob file with `num` blobs in it.
|
2021-06-16 23:50:43 +00:00
|
|
|
void WriteBlobFile(const ImmutableOptions& immutable_options,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
uint32_t column_family_id, bool has_ttl,
|
|
|
|
const ExpirationRange& expiration_range_header,
|
|
|
|
const ExpirationRange& expiration_range_footer,
|
2021-09-18 01:43:32 +00:00
|
|
|
uint64_t blob_file_number, const std::vector<Slice>& keys,
|
|
|
|
const std::vector<Slice>& blobs, CompressionType compression,
|
|
|
|
std::vector<uint64_t>& blob_offsets,
|
|
|
|
std::vector<uint64_t>& blob_sizes) {
|
2021-06-16 23:50:43 +00:00
|
|
|
assert(!immutable_options.cf_paths.empty());
|
2021-09-18 01:43:32 +00:00
|
|
|
size_t num = keys.size();
|
|
|
|
assert(num == blobs.size());
|
|
|
|
assert(num == blob_offsets.size());
|
|
|
|
assert(num == blob_sizes.size());
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
const std::string blob_file_path =
|
|
|
|
BlobFileName(immutable_options.cf_paths.front().path, blob_file_number);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
std::unique_ptr<FSWritableFile> file;
|
2021-06-16 23:50:43 +00:00
|
|
|
ASSERT_OK(NewWritableFile(immutable_options.fs.get(), blob_file_path, &file,
|
|
|
|
FileOptions()));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
|
|
|
|
std::move(file), blob_file_path, FileOptions(), immutable_options.clock));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr Statistics* statistics = nullptr;
|
|
|
|
constexpr bool use_fsync = false;
|
Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
2021-01-25 21:30:17 +00:00
|
|
|
constexpr bool do_flush = false;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
BlobLogWriter blob_log_writer(std::move(file_writer), immutable_options.clock,
|
|
|
|
statistics, blob_file_number, use_fsync,
|
|
|
|
do_flush);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
BlobLogHeader header(column_family_id, compression, has_ttl,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
expiration_range_header);
|
|
|
|
|
Group SST write in flush, compaction and db open with new stats (#11910)
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 23:29:23 +00:00
|
|
|
ASSERT_OK(blob_log_writer.WriteHeader(WriteOptions(), header));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
std::vector<std::string> compressed_blobs(num);
|
|
|
|
std::vector<Slice> blobs_to_write(num);
|
|
|
|
if (kNoCompression == compression) {
|
|
|
|
for (size_t i = 0; i < num; ++i) {
|
|
|
|
blobs_to_write[i] = blobs[i];
|
|
|
|
blob_sizes[i] = blobs[i].size();
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
} else {
|
|
|
|
CompressionOptions opts;
|
Add `CompressionOptions::checksum` for enabling ZSTD checksum (#11666)
Summary:
Optionally enable zstd checksum flag (https://github.com/facebook/zstd/blob/d857369028d997c92ff1f1861a4d7f679a125464/lib/zstd.h#L428) to detect corruption during decompression. Main changes are in compression.h:
* User can set CompressionOptions::checksum to true to enable this feature.
* We enable this feature in ZSTD by setting the checksum flag in ZSTD compression context: `ZSTD_CCtx`.
* Uses `ZSTD_compress2()` to do compression since it supports frame parameter like the checksum flag. Compression level is also set in compression context as a flag.
* Error handling during decompression to propagate error message from ZSTD.
* Updated microbench to test read performance impact.
About compatibility, the current compression decoders should continue to work with the data created by the new compression API `ZSTD_compress2()`: https://github.com/facebook/zstd/issues/3711.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11666
Test Plan:
* Existing unit tests for zstd compression
* Add unit test `DBTest2.ZSTDChecksum` to test the corruption case
* Manually tested that compression levels, parallel compression, dictionary compression, index compression all work with the new ZSTD_compress2() API.
* Manually tested with `sst_dump --command=recompress` that different compression levels and dictionary compression settings all work.
* Manually tested compiling with older versions of ZSTD: v1.3.8, v1.1.0, v0.6.2.
* Perf impact: from public benchmark data: http://fastcompression.blogspot.com/2019/03/presenting-xxh3.html for checksum and https://github.com/facebook/zstd#benchmarks, if decompression is 1700MB/s and checksum computation is 70000MB/s, checksum computation is an additional ~2.4% time for decompression. Compression is slower and checksumming should be less noticeable.
* Microbench:
```
TEST_TMPDIR=/dev/shm ./branch_db_basic_bench --benchmark_filter=DBGet/comp_style:0/max_data:1048576/per_key_size:256/enable_statistics:0/negative_query:0/enable_filter:0/mmap:0/compression_type:7/compression_checksum:1/no_blockcache:1/iterations:10000/threads:1 --benchmark_repetitions=100
Min out of 100 runs:
Main:
10390 10436 10456 10484 10499 10535 10544 10545 10565 10568
After this PR, checksum=false
10285 10397 10503 10508 10515 10557 10562 10635 10640 10660
After this PR, checksum=true
10827 10876 10925 10949 10971 11052 11061 11063 11100 11109
```
* db_bench:
```
Write perf
TEST_TMPDIR=/dev/shm/ ./db_bench_ichecksum --benchmarks=fillseq[-X10] --compression_type=zstd --num=10000000 --compression_checksum=..
[FillSeq checksum=0]
fillseq [AVG 10 runs] : 281635 (± 31711) ops/sec; 31.2 (± 3.5) MB/sec
fillseq [MEDIAN 10 runs] : 294027 ops/sec; 32.5 MB/sec
[FillSeq checksum=1]
fillseq [AVG 10 runs] : 286961 (± 34700) ops/sec; 31.7 (± 3.8) MB/sec
fillseq [MEDIAN 10 runs] : 283278 ops/sec; 31.3 MB/sec
Read perf
TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=readrandom[-X20] --num=100000000 --reads=1000000 --use_existing_db=true --readonly=1
[Readrandom checksum=1]
readrandom [AVG 20 runs] : 360928 (± 3579) ops/sec; 4.0 (± 0.0) MB/sec
readrandom [MEDIAN 20 runs] : 362468 ops/sec; 4.0 MB/sec
[Readrandom checksum=0]
readrandom [AVG 20 runs] : 380365 (± 2384) ops/sec; 4.2 (± 0.0) MB/sec
readrandom [MEDIAN 20 runs] : 379800 ops/sec; 4.2 MB/sec
Compression
TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=compress[-X20] --compression_type=zstd --num=100000000 --compression_checksum=1
checksum=1
compress [AVG 20 runs] : 54074 (± 634) ops/sec; 211.2 (± 2.5) MB/sec
compress [MEDIAN 20 runs] : 54396 ops/sec; 212.5 MB/sec
checksum=0
compress [AVG 20 runs] : 54598 (± 393) ops/sec; 213.3 (± 1.5) MB/sec
compress [MEDIAN 20 runs] : 54592 ops/sec; 213.3 MB/sec
Decompression:
TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=uncompress[-X20] --compression_type=zstd --compression_checksum=1
checksum = 0
uncompress [AVG 20 runs] : 167499 (± 962) ops/sec; 654.3 (± 3.8) MB/sec
uncompress [MEDIAN 20 runs] : 167210 ops/sec; 653.2 MB/sec
checksum = 1
uncompress [AVG 20 runs] : 167980 (± 924) ops/sec; 656.2 (± 3.6) MB/sec
uncompress [MEDIAN 20 runs] : 168465 ops/sec; 658.1 MB/sec
```
Reviewed By: ajkr
Differential Revision: D48019378
Pulled By: cbi42
fbshipit-source-id: 674120c6e1853c2ced1436ac8138559d0204feba
2023-08-18 22:01:59 +00:00
|
|
|
CompressionContext context(compression, opts);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
constexpr uint64_t sample_for_compression = 0;
|
|
|
|
CompressionInfo info(opts, context, CompressionDict::GetEmptyDict(),
|
2021-09-18 01:43:32 +00:00
|
|
|
compression, sample_for_compression);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t compression_format_version = 2;
|
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num; ++i) {
|
|
|
|
ASSERT_TRUE(CompressData(blobs[i], info, compression_format_version,
|
|
|
|
&compressed_blobs[i]));
|
|
|
|
blobs_to_write[i] = compressed_blobs[i];
|
|
|
|
blob_sizes[i] = compressed_blobs[i].size();
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num; ++i) {
|
|
|
|
uint64_t key_offset = 0;
|
Group SST write in flush, compaction and db open with new stats (#11910)
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 23:29:23 +00:00
|
|
|
ASSERT_OK(blob_log_writer.AddRecord(WriteOptions(), keys[i],
|
|
|
|
blobs_to_write[i], &key_offset,
|
2021-09-18 01:43:32 +00:00
|
|
|
&blob_offsets[i]));
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
BlobLogFooter footer;
|
2021-09-18 01:43:32 +00:00
|
|
|
footer.blob_count = num;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
footer.expiration_range = expiration_range_footer;
|
|
|
|
|
|
|
|
std::string checksum_method;
|
|
|
|
std::string checksum_value;
|
Group SST write in flush, compaction and db open with new stats (#11910)
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 23:29:23 +00:00
|
|
|
ASSERT_OK(blob_log_writer.AppendFooter(WriteOptions(), footer,
|
|
|
|
&checksum_method, &checksum_value));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
// Creates a test blob file with a single blob in it. Note: this method
|
|
|
|
// makes it possible to test various corner cases by allowing the caller
|
|
|
|
// to specify the contents of various blob file header/footer fields.
|
|
|
|
void WriteBlobFile(const ImmutableOptions& immutable_options,
|
|
|
|
uint32_t column_family_id, bool has_ttl,
|
|
|
|
const ExpirationRange& expiration_range_header,
|
|
|
|
const ExpirationRange& expiration_range_footer,
|
|
|
|
uint64_t blob_file_number, const Slice& key,
|
|
|
|
const Slice& blob, CompressionType compression,
|
|
|
|
uint64_t* blob_offset, uint64_t* blob_size) {
|
|
|
|
std::vector<Slice> keys{key};
|
|
|
|
std::vector<Slice> blobs{blob};
|
|
|
|
std::vector<uint64_t> blob_offsets{0};
|
|
|
|
std::vector<uint64_t> blob_sizes{0};
|
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl,
|
|
|
|
expiration_range_header, expiration_range_footer,
|
|
|
|
blob_file_number, keys, blobs, compression, blob_offsets,
|
|
|
|
blob_sizes);
|
|
|
|
if (blob_offset) {
|
|
|
|
*blob_offset = blob_offsets[0];
|
|
|
|
}
|
|
|
|
if (blob_size) {
|
|
|
|
*blob_size = blob_sizes[0];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
} // anonymous namespace
|
|
|
|
|
|
|
|
class BlobFileReaderTest : public testing::Test {
|
|
|
|
protected:
|
2021-09-21 15:53:03 +00:00
|
|
|
BlobFileReaderTest() { mock_env_.reset(MockEnv::Create(Env::Default())); }
|
|
|
|
std::unique_ptr<Env> mock_env_;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, CreateReaderAndGetBlob) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderTest_CreateReaderAndGetBlob"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
2021-09-18 01:43:32 +00:00
|
|
|
constexpr size_t num_blobs = 3;
|
|
|
|
const std::vector<std::string> key_strs = {"key1", "key2", "key3"};
|
|
|
|
const std::vector<std::string> blob_strs = {"blob1", "blob2", "blob3"};
|
|
|
|
|
|
|
|
const std::vector<Slice> keys = {key_strs[0], key_strs[1], key_strs[2]};
|
|
|
|
const std::vector<Slice> blobs = {blob_strs[0], blob_strs[1], blob_strs[2]};
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
std::vector<uint64_t> blob_offsets(keys.size());
|
|
|
|
std::vector<uint64_t> blob_sizes(keys.size());
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
2021-09-18 01:43:32 +00:00
|
|
|
expiration_range, blob_file_number, keys, blobs, kNoCompression,
|
|
|
|
blob_offsets, blob_sizes);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
|
|
|
|
2023-04-21 16:07:18 +00:00
|
|
|
ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
ASSERT_OK(BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
// Make sure the blob can be retrieved with and without checksum verification
|
|
|
|
read_options.verify_checksums = false;
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
2021-11-20 01:52:42 +00:00
|
|
|
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
ASSERT_OK(reader->GetBlob(read_options, keys[0], blob_offsets[0],
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[0], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read));
|
|
|
|
ASSERT_NE(value, nullptr);
|
|
|
|
ASSERT_EQ(value->data(), blobs[0]);
|
2021-09-18 01:43:32 +00:00
|
|
|
ASSERT_EQ(bytes_read, blob_sizes[0]);
|
|
|
|
|
|
|
|
// MultiGetBlob
|
|
|
|
bytes_read = 0;
|
|
|
|
size_t total_size = 0;
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
std::array<Status, num_blobs> statuses_buf;
|
2022-06-30 20:24:35 +00:00
|
|
|
std::array<BlobReadRequest, num_blobs> requests_buf;
|
2022-09-08 19:40:18 +00:00
|
|
|
autovector<std::pair<BlobReadRequest*, std::unique_ptr<BlobContents>>>
|
|
|
|
blob_reqs;
|
2022-06-30 20:24:35 +00:00
|
|
|
|
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
requests_buf[i] =
|
|
|
|
BlobReadRequest(keys[i], blob_offsets[i], blob_sizes[i],
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, nullptr, &statuses_buf[i]);
|
|
|
|
blob_reqs.emplace_back(&requests_buf[i], std::unique_ptr<BlobContents>());
|
2022-06-30 20:24:35 +00:00
|
|
|
}
|
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
reader->MultiGetBlob(read_options, allocator, blob_reqs, &bytes_read);
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
2022-09-08 19:40:18 +00:00
|
|
|
const auto& result = blob_reqs[i].second;
|
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
ASSERT_OK(statuses_buf[i]);
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_NE(result, nullptr);
|
|
|
|
ASSERT_EQ(result->data(), blobs[i]);
|
2021-09-18 01:43:32 +00:00
|
|
|
total_size += blob_sizes[i];
|
|
|
|
}
|
|
|
|
ASSERT_EQ(bytes_read, total_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
read_options.verify_checksums = true;
|
|
|
|
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
ASSERT_OK(reader->GetBlob(read_options, keys[1], blob_offsets[1],
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[1], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read));
|
|
|
|
ASSERT_NE(value, nullptr);
|
|
|
|
ASSERT_EQ(value->data(), blobs[1]);
|
2021-03-04 08:42:11 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
const uint64_t key_size = keys[1].size();
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read,
|
|
|
|
BlobLogRecord::CalculateAdjustmentForRecordHeader(key_size) +
|
2021-09-18 01:43:32 +00:00
|
|
|
blob_sizes[1]);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Invalid offset (too close to start of file)
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
2021-09-18 01:43:32 +00:00
|
|
|
->GetBlob(read_options, keys[0], blob_offsets[0] - 1,
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[0], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Invalid offset (too close to end of file)
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
2021-09-18 01:43:32 +00:00
|
|
|
->GetBlob(read_options, keys[2], blob_offsets[2] + 1,
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[2], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Incorrect compression type
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_TRUE(reader
|
2021-09-18 01:43:32 +00:00
|
|
|
->GetBlob(read_options, keys[0], blob_offsets[0],
|
2022-09-08 19:40:18 +00:00
|
|
|
blob_sizes[0], kZSTD, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read)
|
2021-03-04 08:42:11 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Incorrect key size
|
|
|
|
{
|
|
|
|
constexpr char shorter_key[] = "k";
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
|
|
|
->GetBlob(read_options, shorter_key,
|
2021-09-18 01:43:32 +00:00
|
|
|
blob_offsets[0] -
|
|
|
|
(keys[0].size() - sizeof(shorter_key) + 1),
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[0], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
2021-09-18 01:43:32 +00:00
|
|
|
|
|
|
|
// MultiGetBlob
|
|
|
|
autovector<std::reference_wrapper<const Slice>> key_refs;
|
|
|
|
for (const auto& key_ref : keys) {
|
|
|
|
key_refs.emplace_back(std::cref(key_ref));
|
|
|
|
}
|
|
|
|
Slice shorter_key_slice(shorter_key, sizeof(shorter_key) - 1);
|
|
|
|
key_refs[1] = std::cref(shorter_key_slice);
|
|
|
|
|
|
|
|
autovector<uint64_t> offsets{
|
|
|
|
blob_offsets[0],
|
|
|
|
blob_offsets[1] - (keys[1].size() - key_refs[1].get().size()),
|
|
|
|
blob_offsets[2]};
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
std::array<Status, num_blobs> statuses_buf;
|
2022-06-30 20:24:35 +00:00
|
|
|
std::array<BlobReadRequest, num_blobs> requests_buf;
|
2022-09-08 19:40:18 +00:00
|
|
|
autovector<std::pair<BlobReadRequest*, std::unique_ptr<BlobContents>>>
|
|
|
|
blob_reqs;
|
2022-06-30 20:24:35 +00:00
|
|
|
|
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
requests_buf[i] =
|
|
|
|
BlobReadRequest(key_refs[i], offsets[i], blob_sizes[i],
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, nullptr, &statuses_buf[i]);
|
|
|
|
blob_reqs.emplace_back(&requests_buf[i], std::unique_ptr<BlobContents>());
|
2022-06-30 20:24:35 +00:00
|
|
|
}
|
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
reader->MultiGetBlob(read_options, allocator, blob_reqs, &bytes_read);
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
if (i == 1) {
|
|
|
|
ASSERT_TRUE(statuses_buf[i].IsCorruption());
|
|
|
|
} else {
|
|
|
|
ASSERT_OK(statuses_buf[i]);
|
|
|
|
}
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Incorrect key
|
|
|
|
{
|
2021-09-18 01:43:32 +00:00
|
|
|
constexpr char incorrect_key[] = "foo1";
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
2021-09-18 01:43:32 +00:00
|
|
|
->GetBlob(read_options, incorrect_key, blob_offsets[0],
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[0], kNoCompression, prefetch_buffer,
|
2022-09-08 19:40:18 +00:00
|
|
|
allocator, &value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
2021-09-18 01:43:32 +00:00
|
|
|
|
|
|
|
// MultiGetBlob
|
|
|
|
autovector<std::reference_wrapper<const Slice>> key_refs;
|
|
|
|
for (const auto& key_ref : keys) {
|
|
|
|
key_refs.emplace_back(std::cref(key_ref));
|
|
|
|
}
|
|
|
|
Slice wrong_key_slice(incorrect_key, sizeof(incorrect_key) - 1);
|
|
|
|
key_refs[2] = std::cref(wrong_key_slice);
|
|
|
|
|
|
|
|
std::array<Status, num_blobs> statuses_buf;
|
2022-06-30 20:24:35 +00:00
|
|
|
std::array<BlobReadRequest, num_blobs> requests_buf;
|
2022-09-08 19:40:18 +00:00
|
|
|
autovector<std::pair<BlobReadRequest*, std::unique_ptr<BlobContents>>>
|
|
|
|
blob_reqs;
|
2022-06-30 20:24:35 +00:00
|
|
|
|
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
requests_buf[i] =
|
|
|
|
BlobReadRequest(key_refs[i], blob_offsets[i], blob_sizes[i],
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, nullptr, &statuses_buf[i]);
|
|
|
|
blob_reqs.emplace_back(&requests_buf[i], std::unique_ptr<BlobContents>());
|
2022-06-30 20:24:35 +00:00
|
|
|
}
|
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
reader->MultiGetBlob(read_options, allocator, blob_reqs, &bytes_read);
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
if (i == num_blobs - 1) {
|
|
|
|
ASSERT_TRUE(statuses_buf[i].IsCorruption());
|
|
|
|
} else {
|
|
|
|
ASSERT_OK(statuses_buf[i]);
|
|
|
|
}
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// Incorrect value size
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
2021-09-18 01:43:32 +00:00
|
|
|
->GetBlob(read_options, keys[1], blob_offsets[1],
|
2021-11-20 01:52:42 +00:00
|
|
|
blob_sizes[1] + 1, kNoCompression,
|
2022-09-08 19:40:18 +00:00
|
|
|
prefetch_buffer, allocator, &value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
2021-09-18 01:43:32 +00:00
|
|
|
|
|
|
|
// MultiGetBlob
|
|
|
|
autovector<std::reference_wrapper<const Slice>> key_refs;
|
|
|
|
for (const auto& key_ref : keys) {
|
|
|
|
key_refs.emplace_back(std::cref(key_ref));
|
|
|
|
}
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
std::array<Status, num_blobs> statuses_buf;
|
2022-06-30 20:24:35 +00:00
|
|
|
std::array<BlobReadRequest, num_blobs> requests_buf;
|
|
|
|
|
|
|
|
requests_buf[0] =
|
|
|
|
BlobReadRequest(key_refs[0], blob_offsets[0], blob_sizes[0],
|
2024-03-04 18:08:32 +00:00
|
|
|
kNoCompression, nullptr, statuses_buf.data());
|
2022-06-30 20:24:35 +00:00
|
|
|
requests_buf[1] =
|
|
|
|
BlobReadRequest(key_refs[1], blob_offsets[1], blob_sizes[1] + 1,
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, nullptr, &statuses_buf[1]);
|
2022-06-30 20:24:35 +00:00
|
|
|
requests_buf[2] =
|
|
|
|
BlobReadRequest(key_refs[2], blob_offsets[2], blob_sizes[2],
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, nullptr, &statuses_buf[2]);
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
autovector<std::pair<BlobReadRequest*, std::unique_ptr<BlobContents>>>
|
|
|
|
blob_reqs;
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2022-09-08 19:40:18 +00:00
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
blob_reqs.emplace_back(&requests_buf[i], std::unique_ptr<BlobContents>());
|
|
|
|
}
|
|
|
|
|
|
|
|
reader->MultiGetBlob(read_options, allocator, blob_reqs, &bytes_read);
|
2022-06-30 20:24:35 +00:00
|
|
|
|
2021-09-18 01:43:32 +00:00
|
|
|
for (size_t i = 0; i < num_blobs; ++i) {
|
|
|
|
if (i != 1) {
|
|
|
|
ASSERT_OK(statuses_buf[i]);
|
|
|
|
} else {
|
|
|
|
ASSERT_TRUE(statuses_buf[i].IsCorruption());
|
|
|
|
}
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, Malformed) {
|
|
|
|
// Write a blob file consisting of nothing but a header, and make sure we
|
|
|
|
// detect the error when we open it for reading
|
|
|
|
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(), "BlobFileReaderTest_Malformed"),
|
|
|
|
0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
|
|
|
|
{
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
const std::string blob_file_path =
|
|
|
|
BlobFileName(immutable_options.cf_paths.front().path, blob_file_number);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
std::unique_ptr<FSWritableFile> file;
|
2021-06-16 23:50:43 +00:00
|
|
|
ASSERT_OK(NewWritableFile(immutable_options.fs.get(), blob_file_path, &file,
|
|
|
|
FileOptions()));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
std::unique_ptr<WritableFileWriter> file_writer(
|
|
|
|
new WritableFileWriter(std::move(file), blob_file_path, FileOptions(),
|
2021-06-16 23:50:43 +00:00
|
|
|
immutable_options.clock));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr Statistics* statistics = nullptr;
|
|
|
|
constexpr bool use_fsync = false;
|
Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
2021-01-25 21:30:17 +00:00
|
|
|
constexpr bool do_flush = false;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-03-15 11:32:24 +00:00
|
|
|
BlobLogWriter blob_log_writer(std::move(file_writer),
|
2021-06-16 23:50:43 +00:00
|
|
|
immutable_options.clock, statistics,
|
2021-03-15 11:32:24 +00:00
|
|
|
blob_file_number, use_fsync, do_flush);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
BlobLogHeader header(column_family_id, kNoCompression, has_ttl,
|
|
|
|
expiration_range);
|
|
|
|
|
Group SST write in flush, compaction and db open with new stats (#11910)
Summary:
## Context/Summary
Similar to https://github.com/facebook/rocksdb/pull/11288, https://github.com/facebook/rocksdb/pull/11444, categorizing SST/blob file write according to different io activities allows more insight into the activity.
For that, this PR does the following:
- Tag different write IOs by passing down and converting WriteOptions to IOOptions
- Add new SST_WRITE_MICROS histogram in WritableFileWriter::Append() and breakdown FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS
Some related code refactory to make implementation cleaner:
- Blob stats
- Replace high-level write measurement with low-level WritableFileWriter::Append() measurement for BLOB_DB_BLOB_FILE_WRITE_MICROS. This is to make FILE_WRITE_{FLUSH|COMPACTION|DB_OPEN}_MICROS include blob file. As a consequence, this introduces some behavioral changes on it, see HISTORY and db bench test plan below for more info.
- Fix bugs where BLOB_DB_BLOB_FILE_SYNCED/BLOB_DB_BLOB_FILE_BYTES_WRITTEN include file failed to sync and bytes failed to write.
- Refactor WriteOptions constructor for easier construction with io_activity and rate_limiter_priority
- Refactor DBImpl::~DBImpl()/BlobDBImpl::Close() to bypass thread op verification
- Build table
- TableBuilderOptions now includes Read/WriteOpitons so BuildTable() do not need to take these two variables
- Replace the io_priority passed into BuildTable() with TableBuilderOptions::WriteOpitons::rate_limiter_priority. Similar for BlobFileBuilder.
This parameter is used for dynamically changing file io priority for flush, see https://github.com/facebook/rocksdb/pull/9988?fbclid=IwAR1DtKel6c-bRJAdesGo0jsbztRtciByNlvokbxkV6h_L-AE9MACzqRTT5s for more
- Update ThreadStatus::FLUSH_BYTES_WRITTEN to use io_activity to track flush IO in flush job and db open instead of io_priority
## Test
### db bench
Flush
```
./db_bench --statistics=1 --benchmarks=fillseq --num=100000 --write_buffer_size=100
rocksdb.sst.write.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.flush.micros P50 : 1.830863 P95 : 4.094720 P99 : 6.578947 P100 : 26.000000 COUNT : 7875 SUM : 20377
rocksdb.file.write.compaction.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.db.open.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
```
compaction, db oopen
```
Setup: ./db_bench --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
rocksdb.sst.write.micros P50 : 2.675325 P95 : 9.578788 P99 : 18.780000 P100 : 314.000000 COUNT : 638 SUM : 3279
rocksdb.file.write.flush.micros P50 : 0.000000 P95 : 0.000000 P99 : 0.000000 P100 : 0.000000 COUNT : 0 SUM : 0
rocksdb.file.write.compaction.micros P50 : 2.757353 P95 : 9.610687 P99 : 19.316667 P100 : 314.000000 COUNT : 615 SUM : 3213
rocksdb.file.write.db.open.micros P50 : 2.055556 P95 : 3.925000 P99 : 9.000000 P100 : 9.000000 COUNT : 23 SUM : 66
```
blob stats - just to make sure they aren't broken by this PR
```
Integrated Blob DB
Setup: ./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
Run:./db_bench --enable_blob_files=1 --statistics=1 --benchmarks=compact --db=../db_bench --use_existing_db=1
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 7.298246 P95 : 9.771930 P99 : 9.991813 P100 : 16.000000 COUNT : 235 SUM : 1600
rocksdb.blobdb.blob.file.synced COUNT : 1
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 2.000000 P95 : 2.829360 P99 : 2.993779 P100 : 9.000000 COUNT : 707 SUM : 1614
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 1 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 34842 (stay the same)
```
```
Stacked Blob DB
Run: ./db_bench --use_blob_db=1 --statistics=1 --benchmarks=fillseq --num=10000 --disable_auto_compactions=1 -write_buffer_size=100 --db=../db_bench
pre-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 12.808042 P95 : 19.674497 P99 : 28.539683 P100 : 51.000000 COUNT : 10000 SUM : 140876
rocksdb.blobdb.blob.file.synced COUNT : 8
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445
post-PR:
rocksdb.blobdb.blob.file.write.micros P50 : 1.657370 P95 : 2.952175 P99 : 3.877519 P100 : 24.000000 COUNT : 30001 SUM : 67924
- COUNT is higher and values are smaller as it includes header and footer write
- COUNT is 3X higher due to each Append() count as one post-PR, while in pre-PR, 3 Append()s counts as one. See https://github.com/facebook/rocksdb/pull/11910/files#diff-32b811c0a1c000768cfb2532052b44dc0b3bf82253f3eab078e15ff201a0dabfL157-L164
rocksdb.blobdb.blob.file.synced COUNT : 8 (stay the same)
rocksdb.blobdb.blob.file.bytes.written COUNT : 1043445 (stay the same)
```
### Rehearsal CI stress test
Trigger 3 full runs of all our CI stress tests
### Performance
Flush
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=ManualFlush/key_num:524288/per_key_size:256 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark; enable_statistics = true
Pre-pr: avg 507515519.3 ns
497686074,499444327,500862543,501389862,502994471,503744435,504142123,504224056,505724198,506610393,506837742,506955122,507695561,507929036,508307733,508312691,508999120,509963561,510142147,510698091,510743096,510769317,510957074,511053311,511371367,511409911,511432960,511642385,511691964,511730908,
Post-pr: avg 511971266.5 ns, regressed 0.88%
502744835,506502498,507735420,507929724,508313335,509548582,509994942,510107257,510715603,511046955,511352639,511458478,512117521,512317380,512766303,512972652,513059586,513804934,513808980,514059409,514187369,514389494,514447762,514616464,514622882,514641763,514666265,514716377,514990179,515502408,
```
Compaction
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_{pre|post}_pr --benchmark_filter=ManualCompaction/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 495346098.30 ns
492118301,493203526,494201411,494336607,495269217,495404950,496402598,497012157,497358370,498153846
Post-pr: avg 504528077.20, regressed 1.85%. "ManualCompaction" include flush so the isolated regression for compaction should be around 1.85-0.88 = 0.97%
502465338,502485945,502541789,502909283,503438601,504143885,506113087,506629423,507160414,507393007
```
Put with WAL (in case passing WriteOptions slows down this path even without collecting SST write stats)
```
TEST_TMPDIR=/dev/shm ./db_basic_bench_pre_pr --benchmark_filter=DBPut/comp_style:0/max_data:107374182400/per_key_size:256/enable_statistics:1/wal:1 --benchmark_repetitions=1000
-- default: 1 thread is used to run benchmark
Pre-pr: avg 3848.10 ns
3814,3838,3839,3848,3854,3854,3854,3860,3860,3860
Post-pr: avg 3874.20 ns, regressed 0.68%
3863,3867,3871,3874,3875,3877,3877,3877,3880,3881
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11910
Reviewed By: ajkr
Differential Revision: D49788060
Pulled By: hx235
fbshipit-source-id: 79e73699cda5be3b66461687e5147c2484fc5eff
2023-12-29 23:29:23 +00:00
|
|
|
ASSERT_OK(blob_log_writer.WriteHeader(WriteOptions(), header));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
|
|
|
ASSERT_TRUE(BlobFileReader::Create(immutable_options, read_options,
|
|
|
|
FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number,
|
|
|
|
nullptr /*IOTracer*/, &reader)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, TTL) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(), "BlobFileReaderTest_TTL"), 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = true;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob, kNoCompression,
|
|
|
|
&blob_offset, &blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
|
|
|
ASSERT_TRUE(BlobFileReader::Create(immutable_options, read_options,
|
|
|
|
FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number,
|
|
|
|
nullptr /*IOTracer*/, &reader)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, ExpirationRangeInHeader) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderTest_ExpirationRangeInHeader"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
2020-10-08 17:47:47 +00:00
|
|
|
const ExpirationRange expiration_range_header(
|
|
|
|
1, 2); // can be made constexpr when we adopt C++14
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
constexpr ExpirationRange expiration_range_footer;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
expiration_range_header, expiration_range_footer,
|
|
|
|
blob_file_number, key, blob, kNoCompression, &blob_offset,
|
|
|
|
&blob_size);
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
|
|
|
ASSERT_TRUE(BlobFileReader::Create(immutable_options, read_options,
|
|
|
|
FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number,
|
|
|
|
nullptr /*IOTracer*/, &reader)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, ExpirationRangeInFooter) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderTest_ExpirationRangeInFooter"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range_header;
|
2020-10-08 17:47:47 +00:00
|
|
|
const ExpirationRange expiration_range_footer(
|
|
|
|
1, 2); // can be made constexpr when we adopt C++14
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
expiration_range_header, expiration_range_footer,
|
|
|
|
blob_file_number, key, blob, kNoCompression, &blob_offset,
|
|
|
|
&blob_size);
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
|
|
|
ASSERT_TRUE(BlobFileReader::Create(immutable_options, read_options,
|
|
|
|
FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number,
|
|
|
|
nullptr /*IOTracer*/, &reader)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, IncorrectColumnFamily) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderTest_IncorrectColumnFamily"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob, kNoCompression,
|
|
|
|
&blob_offset, &blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
|
|
|
|
|
|
|
constexpr uint32_t incorrect_column_family_id = 2;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
|
|
|
ASSERT_TRUE(BlobFileReader::Create(immutable_options, read_options,
|
|
|
|
FileOptions(), incorrect_column_family_id,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
blob_file_read_hist, blob_file_number,
|
2021-02-16 17:47:12 +00:00
|
|
|
nullptr /*IOTracer*/, &reader)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, BlobCRCError) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(), "BlobFileReaderTest_BlobCRCError"),
|
|
|
|
0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob, kNoCompression,
|
|
|
|
&blob_offset, &blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
ASSERT_OK(BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"BlobFileReader::VerifyBlob:CheckBlobCRC", [](void* arg) {
|
|
|
|
BlobLogRecord* const record = static_cast<BlobLogRecord*>(arg);
|
|
|
|
assert(record);
|
|
|
|
|
|
|
|
record->blob_crc = 0xfaceb00c;
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
|
|
|
->GetBlob(ReadOptions(), key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, prefetch_buffer, allocator, &value,
|
2021-11-20 01:52:42 +00:00
|
|
|
&bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, Compression) {
|
|
|
|
if (!Snappy_Supported()) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(), "BlobFileReaderTest_Compression"),
|
|
|
|
0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
kSnappyCompression, &blob_offset, &blob_size);
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
ASSERT_OK(BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
// Make sure the blob can be retrieved with and without checksum verification
|
|
|
|
read_options.verify_checksums = false;
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
2021-11-20 01:52:42 +00:00
|
|
|
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_OK(reader->GetBlob(read_options, key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kSnappyCompression, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read));
|
|
|
|
ASSERT_NE(value, nullptr);
|
|
|
|
ASSERT_EQ(value->data(), blob);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
read_options.verify_checksums = true;
|
|
|
|
|
|
|
|
{
|
2022-09-08 19:40:18 +00:00
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_OK(reader->GetBlob(read_options, key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kSnappyCompression, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read));
|
|
|
|
ASSERT_NE(value, nullptr);
|
|
|
|
ASSERT_EQ(value->data(), blob);
|
2021-03-04 08:42:11 +00:00
|
|
|
|
|
|
|
constexpr uint64_t key_size = sizeof(key) - 1;
|
|
|
|
ASSERT_EQ(bytes_read,
|
|
|
|
BlobLogRecord::CalculateAdjustmentForRecordHeader(key_size) +
|
|
|
|
blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_F(BlobFileReaderTest, UncompressionError) {
|
|
|
|
if (!Snappy_Supported()) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderTest_UncompressionError"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob,
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
kSnappyCompression, &blob_offset, &blob_size);
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
ASSERT_OK(BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
|
|
"BlobFileReader::UncompressBlobIfNeeded:TamperWithResult", [](void* arg) {
|
|
|
|
CacheAllocationPtr* const output =
|
|
|
|
static_cast<CacheAllocationPtr*>(arg);
|
|
|
|
assert(output);
|
|
|
|
|
|
|
|
output->reset();
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
|
|
|
->GetBlob(ReadOptions(), key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kSnappyCompression, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
class BlobFileReaderIOErrorTest
|
|
|
|
: public testing::Test,
|
|
|
|
public testing::WithParamInterface<std::string> {
|
|
|
|
protected:
|
2021-09-21 15:53:03 +00:00
|
|
|
BlobFileReaderIOErrorTest() : sync_point_(GetParam()) {
|
|
|
|
mock_env_.reset(MockEnv::Create(Env::Default()));
|
|
|
|
fault_injection_env_.reset(new FaultInjectionTestEnv(mock_env_.get()));
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-21 15:53:03 +00:00
|
|
|
std::unique_ptr<Env> mock_env_;
|
|
|
|
std::unique_ptr<FaultInjectionTestEnv> fault_injection_env_;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
std::string sync_point_;
|
|
|
|
};
|
|
|
|
|
|
|
|
INSTANTIATE_TEST_CASE_P(BlobFileReaderTest, BlobFileReaderIOErrorTest,
|
|
|
|
::testing::ValuesIn(std::vector<std::string>{
|
|
|
|
"BlobFileReader::OpenFile:GetFileSize",
|
|
|
|
"BlobFileReader::OpenFile:NewRandomAccessFile",
|
|
|
|
"BlobFileReader::ReadHeader:ReadFromFile",
|
|
|
|
"BlobFileReader::ReadFooter:ReadFromFile",
|
|
|
|
"BlobFileReader::GetBlob:ReadFromFile"}));
|
|
|
|
|
|
|
|
TEST_P(BlobFileReaderIOErrorTest, IOError) {
|
|
|
|
// Simulates an I/O error during the specified step
|
|
|
|
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = fault_injection_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(fault_injection_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderIOErrorTest_IOError"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob, kNoCompression,
|
|
|
|
&blob_offset, &blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(sync_point_, [this](void* /* arg */) {
|
2021-09-21 15:53:03 +00:00
|
|
|
fault_injection_env_->SetFilesystemActive(false,
|
|
|
|
Status::IOError(sync_point_));
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
});
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
const Status s = BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
const bool fail_during_create =
|
|
|
|
(sync_point_ != "BlobFileReader::GetBlob:ReadFromFile");
|
|
|
|
|
|
|
|
if (fail_during_create) {
|
|
|
|
ASSERT_TRUE(s.IsIOError());
|
|
|
|
} else {
|
|
|
|
ASSERT_OK(s);
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
|
|
|
->GetBlob(ReadOptions(), key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsIOError());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
class BlobFileReaderDecodingErrorTest
|
|
|
|
: public testing::Test,
|
|
|
|
public testing::WithParamInterface<std::string> {
|
|
|
|
protected:
|
2021-09-21 15:53:03 +00:00
|
|
|
BlobFileReaderDecodingErrorTest() : sync_point_(GetParam()) {
|
|
|
|
mock_env_.reset(MockEnv::Create(Env::Default()));
|
|
|
|
}
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
2021-09-21 15:53:03 +00:00
|
|
|
std::unique_ptr<Env> mock_env_;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
std::string sync_point_;
|
|
|
|
};
|
|
|
|
|
|
|
|
INSTANTIATE_TEST_CASE_P(BlobFileReaderTest, BlobFileReaderDecodingErrorTest,
|
|
|
|
::testing::ValuesIn(std::vector<std::string>{
|
|
|
|
"BlobFileReader::ReadHeader:TamperWithResult",
|
|
|
|
"BlobFileReader::ReadFooter:TamperWithResult",
|
|
|
|
"BlobFileReader::GetBlob:TamperWithResult"}));
|
|
|
|
|
|
|
|
TEST_P(BlobFileReaderDecodingErrorTest, DecodingError) {
|
|
|
|
Options options;
|
2021-09-21 15:53:03 +00:00
|
|
|
options.env = mock_env_.get();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
options.cf_paths.emplace_back(
|
2021-09-21 15:53:03 +00:00
|
|
|
test::PerThreadDBPath(mock_env_.get(),
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
"BlobFileReaderDecodingErrorTest_DecodingError"),
|
|
|
|
0);
|
|
|
|
options.enable_blob_files = true;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
ImmutableOptions immutable_options(options);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
constexpr uint32_t column_family_id = 1;
|
|
|
|
constexpr bool has_ttl = false;
|
|
|
|
constexpr ExpirationRange expiration_range;
|
|
|
|
constexpr uint64_t blob_file_number = 1;
|
|
|
|
constexpr char key[] = "key";
|
|
|
|
constexpr char blob[] = "blob";
|
|
|
|
|
|
|
|
uint64_t blob_offset = 0;
|
|
|
|
uint64_t blob_size = 0;
|
|
|
|
|
2021-06-16 23:50:43 +00:00
|
|
|
WriteBlobFile(immutable_options, column_family_id, has_ttl, expiration_range,
|
|
|
|
expiration_range, blob_file_number, key, blob, kNoCompression,
|
|
|
|
&blob_offset, &blob_size);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
SyncPoint::GetInstance()->SetCallBack(sync_point_, [](void* arg) {
|
|
|
|
Slice* const slice = static_cast<Slice*>(arg);
|
|
|
|
assert(slice);
|
|
|
|
assert(!slice->empty());
|
|
|
|
|
|
|
|
slice->remove_prefix(1);
|
|
|
|
});
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
|
|
|
|
constexpr HistogramImpl* blob_file_read_hist = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobFileReader> reader;
|
2023-04-21 16:07:18 +00:00
|
|
|
const ReadOptions read_options;
|
2021-02-16 17:47:12 +00:00
|
|
|
const Status s = BlobFileReader::Create(
|
2023-04-21 16:07:18 +00:00
|
|
|
immutable_options, read_options, FileOptions(), column_family_id,
|
|
|
|
blob_file_read_hist, blob_file_number, nullptr /*IOTracer*/, &reader);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
const bool fail_during_create =
|
|
|
|
sync_point_ != "BlobFileReader::GetBlob:TamperWithResult";
|
|
|
|
|
|
|
|
if (fail_during_create) {
|
|
|
|
ASSERT_TRUE(s.IsCorruption());
|
|
|
|
} else {
|
|
|
|
ASSERT_OK(s);
|
|
|
|
|
2021-11-20 01:52:42 +00:00
|
|
|
constexpr FilePrefetchBuffer* prefetch_buffer = nullptr;
|
2022-09-08 19:40:18 +00:00
|
|
|
constexpr MemoryAllocator* allocator = nullptr;
|
|
|
|
|
|
|
|
std::unique_ptr<BlobContents> value;
|
2021-03-04 08:42:11 +00:00
|
|
|
uint64_t bytes_read = 0;
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
|
|
|
|
ASSERT_TRUE(reader
|
|
|
|
->GetBlob(ReadOptions(), key, blob_offset, blob_size,
|
2022-09-08 19:40:18 +00:00
|
|
|
kNoCompression, prefetch_buffer, allocator,
|
|
|
|
&value, &bytes_read)
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
.IsCorruption());
|
2022-09-08 19:40:18 +00:00
|
|
|
ASSERT_EQ(value, nullptr);
|
2021-03-04 08:42:11 +00:00
|
|
|
ASSERT_EQ(bytes_read, 0);
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
|
|
SyncPoint::GetInstance()->ClearAllCallBacks();
|
|
|
|
}
|
|
|
|
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|
|
|
|
|
|
|
|
int main(int argc, char** argv) {
|
2022-10-18 07:35:35 +00:00
|
|
|
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
|
Introduce a blob file reader class (#7461)
Summary:
The patch adds a class called `BlobFileReader` that can be used to retrieve blobs
using the information available in blob references (e.g. blob file number, offset, and
size). This will come in handy when implementing blob support for `Get`, `MultiGet`,
and iterators, and also for compaction/garbage collection.
When a `BlobFileReader` object is created (using the factory method `Create`),
it first checks whether the specified file is potentially valid by comparing the file
size against the combined size of the blob file header and footer (files smaller than
the threshold are considered malformed). Then, it opens the file, and reads and verifies
the header and footer. The verification involves magic number/CRC checks
as well as checking for unexpected header/footer fields, e.g. incorrect column family ID
or TTL blob files.
Blobs can be retrieved using `GetBlob`. `GetBlob` validates the offset and compression
type passed by the caller (because of the presence of the header and footer, the
specified offset cannot be too close to the start/end of the file; also, the compression type
has to match the one in the blob file header), and retrieves and potentially verifies and
uncompresses the blob. In particular, when `ReadOptions::verify_checksums` is set,
`BlobFileReader` reads the blob record header as well (as opposed to just the blob itself)
and verifies the key/value size, the key itself, as well as the CRC of the blob record header
and the key/value pair.
In addition, the patch exposes the compression type from `BlobIndex` (both using an
accessor and via `DebugString`), and adds a blob file read latency histogram to
`InternalStats` that can be used with `BlobFileReader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7461
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23999219
Pulled By: ltamasi
fbshipit-source-id: deb6b1160d251258b308d5156e2ec063c3e12e5e
2020-10-07 22:43:23 +00:00
|
|
|
::testing::InitGoogleTest(&argc, argv);
|
|
|
|
return RUN_ALL_TESTS();
|
|
|
|
}
|