rocksdb/util/rate_limiter_test.cc

564 lines
23 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
#include "util/rate_limiter.h"
#include <chrono>
#include <cinttypes>
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
#include <cstdint>
#include <limits>
#include "db/db_test_util.h"
#include "options/options_parser.h"
#include "port/port.h"
#include "rocksdb/convenience.h"
#include "rocksdb/system_clock.h"
#include "rocksdb/utilities/options_type.h"
#include "test_util/sync_point.h"
#include "test_util/testharness.h"
#include "util/random.h"
namespace ROCKSDB_NAMESPACE {
// TODO(yhchiang): the rate will not be accurate when we run test in parallel.
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
class RateLimiterTest : public testing::Test {
protected:
~RateLimiterTest() override {
SyncPoint::GetInstance()->DisableProcessing();
SyncPoint::GetInstance()->ClearAllCallBacks();
}
};
TEST_F(RateLimiterTest, OverflowRate) {
GenericRateLimiter limiter(port::kMaxInt64, 1000, 10,
RateLimiter::Mode::kWritesOnly,
SystemClock::Default(), false /* auto_tuned */);
ASSERT_GT(limiter.GetSingleBurstBytes(), 1000000000ll);
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(RateLimiterTest, StartStop) {
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(100, 100, 10));
}
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
TEST_F(RateLimiterTest, GetTotalBytesThrough) {
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
10 /* fairness */));
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
ASSERT_EQ(limiter->GetTotalBytesThrough(static_cast<Env::IOPriority>(i)),
0);
}
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
std::int64_t request_byte = 200;
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
std::int64_t request_byte_sum = 0;
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
limiter->Request(request_byte, static_cast<Env::IOPriority>(i),
nullptr /* stats */, RateLimiter::OpType::kWrite);
request_byte_sum += request_byte;
}
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
EXPECT_EQ(limiter->GetTotalBytesThrough(static_cast<Env::IOPriority>(i)),
request_byte)
<< "Failed to track total_bytes_through_ correctly when IOPriority = "
<< static_cast<Env::IOPriority>(i);
}
EXPECT_EQ(limiter->GetTotalBytesThrough(Env::IO_TOTAL), request_byte_sum)
<< "Failed to track total_bytes_through_ correctly when IOPriority = "
"Env::IO_TOTAL";
}
TEST_F(RateLimiterTest, GetTotalRequests) {
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
10 /* fairness */));
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
ASSERT_EQ(limiter->GetTotalRequests(static_cast<Env::IOPriority>(i)), 0);
}
std::int64_t total_requests_sum = 0;
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
limiter->Request(200, static_cast<Env::IOPriority>(i), nullptr /* stats */,
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
RateLimiter::OpType::kWrite);
total_requests_sum += 1;
}
for (int i = Env::IO_LOW; i < Env::IO_TOTAL; ++i) {
EXPECT_EQ(limiter->GetTotalRequests(static_cast<Env::IOPriority>(i)), 1)
<< "Failed to track total_requests_ correctly when IOPriority = "
<< static_cast<Env::IOPriority>(i);
}
EXPECT_EQ(limiter->GetTotalRequests(Env::IO_TOTAL), total_requests_sum)
<< "Failed to track total_requests_ correctly when IOPriority = "
"Env::IO_TOTAL";
}
TEST_F(RateLimiterTest, GetTotalPendingRequests) {
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
10 /* fairness */));
int64_t total_pending_requests = 0;
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
ASSERT_OK(limiter->GetTotalPendingRequests(
&total_pending_requests, static_cast<Env::IOPriority>(i)));
ASSERT_EQ(total_pending_requests, 0);
}
// This is a variable for making sure the following callback is called
// and the assertions in it are indeed excuted
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
bool nonzero_pending_requests_verified = false;
SyncPoint::GetInstance()->SetCallBack(
"GenericRateLimiter::Request:PostEnqueueRequest", [&](void* arg) {
port::Mutex* request_mutex = (port::Mutex*)arg;
// We temporarily unlock the mutex so that the following
// GetTotalPendingRequests() can acquire it
request_mutex->Unlock();
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
EXPECT_OK(limiter->GetTotalPendingRequests(
&total_pending_requests, static_cast<Env::IOPriority>(i)))
<< "Failed to return total pending requests for priority level = "
<< static_cast<Env::IOPriority>(i);
if (i == Env::IO_USER || i == Env::IO_TOTAL) {
EXPECT_EQ(total_pending_requests, 1)
<< "Failed to correctly return total pending requests for "
"priority level = "
<< static_cast<Env::IOPriority>(i);
} else {
EXPECT_EQ(total_pending_requests, 0)
<< "Failed to correctly return total pending requests for "
"priority level = "
<< static_cast<Env::IOPriority>(i);
}
}
// We lock the mutex again so that the request thread can resume running
// with the mutex locked
request_mutex->Lock();
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
nonzero_pending_requests_verified = true;
});
SyncPoint::GetInstance()->EnableProcessing();
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
limiter->Request(200, Env::IO_USER, nullptr /* stats */,
RateLimiter::OpType::kWrite);
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
ASSERT_EQ(nonzero_pending_requests_verified, true);
for (int i = Env::IO_LOW; i <= Env::IO_TOTAL; ++i) {
EXPECT_OK(limiter->GetTotalPendingRequests(&total_pending_requests,
static_cast<Env::IOPriority>(i)))
<< "Failed to return total pending requests for priority level = "
<< static_cast<Env::IOPriority>(i);
EXPECT_EQ(total_pending_requests, 0)
<< "Failed to correctly return total pending requests for priority "
"level = "
<< static_cast<Env::IOPriority>(i);
}
SyncPoint::GetInstance()->DisableProcessing();
SyncPoint::GetInstance()->ClearCallBack(
"GenericRateLimiter::Request:PostEnqueueRequest");
}
TEST_F(RateLimiterTest, Modes) {
for (auto mode : {RateLimiter::Mode::kWritesOnly,
RateLimiter::Mode::kReadsOnly, RateLimiter::Mode::kAllIo}) {
GenericRateLimiter limiter(2000 /* rate_bytes_per_sec */,
1000 * 1000 /* refill_period_us */,
10 /* fairness */, mode, SystemClock::Default(),
false /* auto_tuned */);
limiter.Request(1000 /* bytes */, Env::IO_HIGH, nullptr /* stats */,
RateLimiter::OpType::kRead);
if (mode == RateLimiter::Mode::kWritesOnly) {
ASSERT_EQ(0, limiter.GetTotalBytesThrough(Env::IO_HIGH));
} else {
ASSERT_EQ(1000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
}
limiter.Request(1000 /* bytes */, Env::IO_HIGH, nullptr /* stats */,
RateLimiter::OpType::kWrite);
if (mode == RateLimiter::Mode::kAllIo) {
ASSERT_EQ(2000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
} else {
ASSERT_EQ(1000, limiter.GetTotalBytesThrough(Env::IO_HIGH));
}
}
}
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
TEST_F(RateLimiterTest, GeneratePriorityIterationOrder) {
std::unique_ptr<RateLimiter> limiter(NewGenericRateLimiter(
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
200 /* rate_bytes_per_sec */, 1000 * 1000 /* refill_period_us */,
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
10 /* fairness */));
bool possible_random_one_in_fairness_results_for_high_mid_pri[4][2] = {
{false, false}, {false, true}, {true, false}, {true, true}};
std::vector<Env::IOPriority> possible_priority_iteration_orders[4] = {
{Env::IO_USER, Env::IO_HIGH, Env::IO_MID, Env::IO_LOW},
{Env::IO_USER, Env::IO_HIGH, Env::IO_LOW, Env::IO_MID},
{Env::IO_USER, Env::IO_MID, Env::IO_LOW, Env::IO_HIGH},
{Env::IO_USER, Env::IO_LOW, Env::IO_MID, Env::IO_HIGH}};
for (int i = 0; i < 4; ++i) {
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
// These are variables for making sure the following callbacks are called
// and the assertion in the last callback is indeed excuted
bool high_pri_iterated_after_mid_low_pri_set = false;
bool mid_pri_itereated_after_low_pri_set = false;
bool pri_iteration_order_verified = false;
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
SyncPoint::GetInstance()->SetCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PostRandomOneInFairnessForHighPri",
[&](void* arg) {
bool* high_pri_iterated_after_mid_low_pri = (bool*)arg;
*high_pri_iterated_after_mid_low_pri =
possible_random_one_in_fairness_results_for_high_mid_pri[i][0];
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
high_pri_iterated_after_mid_low_pri_set = true;
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
});
SyncPoint::GetInstance()->SetCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PostRandomOneInFairnessForMidPri",
[&](void* arg) {
bool* mid_pri_itereated_after_low_pri = (bool*)arg;
*mid_pri_itereated_after_low_pri =
possible_random_one_in_fairness_results_for_high_mid_pri[i][1];
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
mid_pri_itereated_after_low_pri_set = true;
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
});
SyncPoint::GetInstance()->SetCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PreReturnPriIterationOrder",
[&](void* arg) {
std::vector<Env::IOPriority>* pri_iteration_order =
(std::vector<Env::IOPriority>*)arg;
EXPECT_EQ(*pri_iteration_order, possible_priority_iteration_orders[i])
<< "Failed to generate priority iteration order correctly when "
"high_pri_iterated_after_mid_low_pri = "
<< possible_random_one_in_fairness_results_for_high_mid_pri[i][0]
<< ", mid_pri_itereated_after_low_pri = "
<< possible_random_one_in_fairness_results_for_high_mid_pri[i][1]
<< std::endl;
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
pri_iteration_order_verified = true;
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
});
SyncPoint::GetInstance()->EnableProcessing();
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
limiter->Request(200 /* request max bytes to drain so that refill and order
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
generation will be triggered every time
GenericRateLimiter::Request() is called */
,
Env::IO_USER, nullptr /* stats */,
RateLimiter::OpType::kWrite);
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
ASSERT_EQ(high_pri_iterated_after_mid_low_pri_set, true);
ASSERT_EQ(mid_pri_itereated_after_low_pri_set, true);
ASSERT_EQ(pri_iteration_order_verified, true);
SyncPoint::GetInstance()->DisableProcessing();
SyncPoint::GetInstance()->ClearCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PreReturnPriIterationOrder");
SyncPoint::GetInstance()->ClearCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PostRandomOneInFairnessForMidPri");
SyncPoint::GetInstance()->ClearCallBack(
"GenericRateLimiter::GeneratePriorityIterationOrder::"
"PostRandomOneInFairnessForHighPri");
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
}
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(RateLimiterTest, Rate) {
auto* env = Env::Default();
struct Arg {
Arg(int32_t _target_rate, int _burst)
: limiter(NewGenericRateLimiter(_target_rate /* rate_bytes_per_sec */,
100 * 1000 /* refill_period_us */,
10 /* fairness */)),
request_size(_target_rate /
10 /* refill period here is 1/10 second */),
burst(_burst) {}
std::unique_ptr<RateLimiter> limiter;
int32_t request_size;
int burst;
};
auto writer = [](void* p) {
const auto& thread_clock = SystemClock::Default();
auto* arg = static_cast<Arg*>(p);
// Test for 2 seconds
auto until = thread_clock->NowMicros() + 2 * 1000000;
Random r((uint32_t)(thread_clock->NowNanos() %
std::numeric_limits<uint32_t>::max()));
while (thread_clock->NowMicros() < until) {
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst * 2) + 1); ++i) {
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1,
Env::IO_USER, nullptr /* stats */,
RateLimiter::OpType::kWrite);
}
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst) + 1); ++i) {
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1,
Env::IO_HIGH, nullptr /* stats */,
RateLimiter::OpType::kWrite);
}
Implement superior user & mid IO priority level in GenericRateLimiter (#8595) Summary: Context: An extra IO_USER priority in rate limiter allows users to optionally charge WAL writes / SST reads to rate limiter at this priority level, which then has higher priority than IO_HIGH and IO_LOW. With an extra IO_USER priority, it allows users to better specify the relative urgency/importance among different requests in rate limiter. As a consequence, IO resource management can better prioritize and limit resource based on user's need. The IO_USER is implemented as superior priority in GenericRateLimiter, in the sense that its request queue will always be iterated first without being constrained to fairness. The reason is that the notion of fairness is only meaningful in helping lower priorities in background IO (i.e, IO_HIGH/MID/LOW) to gain some fair chance to run so that it does not block foreground IO (i.e, the ones that are charged at the level of IO_USER). As we can see, the ultimate goal here is to not blocking foreground IO at IO_USER level, which justifies the superiority of IO_USER. Similar benefits exist for IO_MID priority. - Rewrote the logic of deciding the order of iterating request queues of high/low priorities to include the extra user/mid priority w/o affecting the existing behavior (see PR's [comment](https://github.com/facebook/rocksdb/pull/8595/files#r678749331)) - Included the request queue of user-pri/mid-pri in the code path of next-leader-candidate signaling and GenericRateLimiter's destructor - Included the extra user/mid-pri in bookkeeping data structures: total_bytes_through_ and total_requests_ - Re-written the previous impl of explicitly iterating priorities with a loop from Env::IO_LOW to Env::IO_TOTAL Pull Request resolved: https://github.com/facebook/rocksdb/pull/8595 Test Plan: - passed existing rate_limiter_test.cc - passed added unit tests in rate_limiter_test.cc - run performance test to verify performance with only high/low requests is not affected by this change - Set-up command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillrandom --duration=5 --compression_type=none --num=100000000 --disable_auto_compactions=true --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1))` - Test command: `TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=overwrite --use_existing_db=true --disable_wal=true --duration=30 --compression_type=none --num=100000000 --write_buffer_size=1048576 --writable_file_max_buffer_size=65536 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --level0_slowdown_writes_trigger=$(((1 << 31) - 1)) --level0_stop_writes_trigger=$(((1 << 31) - 1)) --statistics=true --rate_limiter_bytes_per_sec=1048576 --rate_limiter_refill_period_us=1000 --threads=32 |& grep -E '(flush|compact)\.write\.bytes'` - Before (on branch upstream/master): `rocksdb.compact.write.bytes COUNT : 4014162` `rocksdb.flush.write.bytes COUNT : 26715832` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.66 - After (on branch rate_limiter_user_pri): `rocksdb.compact.write.bytes COUNT : 3807822` `rocksdb.flush.write.bytes COUNT : 26098659` rocksdb.flush.write.bytes/rocksdb.compact.write.bytes ~= 6.85 Reviewed By: ajkr Differential Revision: D30577783 Pulled By: hx235 fbshipit-source-id: 0881f2705ffd13ecd331256bde7e8ec874a353f4
2021-08-31 17:59:14 +00:00
for (int i = 0; i < static_cast<int>(r.Skewed(arg->burst / 2 + 1) + 1);
++i) {
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1, Env::IO_MID,
nullptr /* stats */, RateLimiter::OpType::kWrite);
}
arg->limiter->Request(r.Uniform(arg->request_size - 1) + 1, Env::IO_LOW,
nullptr /* stats */, RateLimiter::OpType::kWrite);
}
};
int samples = 0;
int samples_at_minimum = 0;
for (int i = 1; i <= 16; i *= 2) {
int32_t target = i * 1024 * 10;
Arg arg(target, i / 4 + 1);
int64_t old_total_bytes_through = 0;
for (int iter = 1; iter <= 2; ++iter) {
// second iteration changes the target dynamically
if (iter == 2) {
target *= 2;
arg.limiter->SetBytesPerSecond(target);
}
auto start = env->NowMicros();
for (int t = 0; t < i; ++t) {
env->StartThread(writer, &arg);
}
env->WaitForJoin();
auto elapsed = env->NowMicros() - start;
double rate =
(arg.limiter->GetTotalBytesThrough() - old_total_bytes_through) *
1000000.0 / elapsed;
old_total_bytes_through = arg.limiter->GetTotalBytesThrough();
fprintf(stderr,
"request size [1 - %" PRIi32 "], limit %" PRIi32
" KB/sec, actual rate: %lf KB/sec, elapsed %.2lf seconds\n",
arg.request_size - 1, target / 1024, rate / 1024,
elapsed / 1000000.0);
++samples;
if (rate / target >= 0.80) {
++samples_at_minimum;
}
ASSERT_LE(rate / target, 1.25);
}
}
// This can fail in heavily loaded CI environments
bool skip_minimum_rate_check =
#if (defined(TRAVIS) || defined(CIRCLECI)) && defined(OS_MACOSX)
true;
#else
getenv("SANDCASTLE");
#endif
if (skip_minimum_rate_check) {
fprintf(stderr, "Skipped minimum rate check (%d / %d passed)\n",
samples_at_minimum, samples);
} else {
ASSERT_EQ(samples_at_minimum, samples);
}
}
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
TEST_F(RateLimiterTest, LimitChangeTest) {
// starvation test when limit changes to a smaller value
int64_t refill_period = 1000 * 1000;
auto* env = Env::Default();
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
struct Arg {
Arg(int32_t _request_size, Env::IOPriority _pri,
std::shared_ptr<RateLimiter> _limiter)
: request_size(_request_size), pri(_pri), limiter(_limiter) {}
int32_t request_size;
Env::IOPriority pri;
std::shared_ptr<RateLimiter> limiter;
};
auto writer = [](void* p) {
auto* arg = static_cast<Arg*>(p);
arg->limiter->Request(arg->request_size, arg->pri, nullptr /* stats */,
RateLimiter::OpType::kWrite);
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
};
for (uint32_t i = 1; i <= 16; i <<= 1) {
int32_t target = i * 1024 * 10;
// refill per second
for (int iter = 0; iter < 2; iter++) {
std::shared_ptr<RateLimiter> limiter =
std::make_shared<GenericRateLimiter>(
target, refill_period, 10, RateLimiter::Mode::kWritesOnly,
SystemClock::Default(), false /* auto_tuned */);
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->LoadDependency(
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
{{"GenericRateLimiter::Request",
"RateLimiterTest::LimitChangeTest:changeLimitStart"},
{"RateLimiterTest::LimitChangeTest:changeLimitEnd",
"GenericRateLimiter::RefillBytesAndGrantRequests"}});
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
Arg arg(target, Env::IO_HIGH, limiter);
// The idea behind is to start a request first, then before it refills,
// update limit to a different value (2X/0.5X). No starvation should
// be guaranteed under any situation
// TODO(lightmark): more test cases are welcome.
env->StartThread(writer, &arg);
int32_t new_limit = (target << 1) >> (iter << 1);
TEST_SYNC_POINT("RateLimiterTest::LimitChangeTest:changeLimitStart");
arg.limiter->SetBytesPerSecond(new_limit);
TEST_SYNC_POINT("RateLimiterTest::LimitChangeTest:changeLimitEnd");
env->WaitForJoin();
fprintf(stderr,
"[COMPLETE] request size %" PRIi32 " KB, new limit %" PRIi32
"KB/sec, refill period %" PRIi64 " ms\n",
target / 1024, new_limit / 1024, refill_period / 1000);
}
}
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
fix rate limiter to avoid starvation Summary: The current implementation of rate limiter has the possibility to introduce resource starvation when change its limit. This diff aims to fix this problem by consuming request bytes partially. Test Plan: ``` ./rate_limiter_test [==========] Running 4 tests from 1 test case. [----------] Global test environment set-up. [----------] 4 tests from RateLimiterTest [ RUN ] RateLimiterTest.OverflowRate [ OK ] RateLimiterTest.OverflowRate (0 ms) [ RUN ] RateLimiterTest.StartStop [ OK ] RateLimiterTest.StartStop (0 ms) [ RUN ] RateLimiterTest.Rate request size [1 - 1023], limit 10 KB/sec, actual rate: 10.355712 KB/sec, elapsed 2.00 seconds request size [1 - 1023], limit 20 KB/sec, actual rate: 19.136564 KB/sec, elapsed 2.00 seconds request size [1 - 2047], limit 20 KB/sec, actual rate: 20.783976 KB/sec, elapsed 2.10 seconds request size [1 - 2047], limit 40 KB/sec, actual rate: 39.308144 KB/sec, elapsed 2.10 seconds request size [1 - 4095], limit 40 KB/sec, actual rate: 40.318349 KB/sec, elapsed 2.20 seconds request size [1 - 4095], limit 80 KB/sec, actual rate: 79.667396 KB/sec, elapsed 2.20 seconds request size [1 - 8191], limit 80 KB/sec, actual rate: 81.807158 KB/sec, elapsed 2.30 seconds request size [1 - 8191], limit 160 KB/sec, actual rate: 160.659761 KB/sec, elapsed 2.20 seconds request size [1 - 16383], limit 160 KB/sec, actual rate: 160.700990 KB/sec, elapsed 3.00 seconds request size [1 - 16383], limit 320 KB/sec, actual rate: 317.639481 KB/sec, elapsed 2.50 seconds [ OK ] RateLimiterTest.Rate (22618 ms) [ RUN ] RateLimiterTest.LimitChangeTest [COMPLETE] request size 10 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 10 KB, new limit 5KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 20 KB, new limit 10KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 80KB/sec, refill period 1000 ms [COMPLETE] request size 40 KB, new limit 20KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 160KB/sec, refill period 1000 ms [COMPLETE] request size 80 KB, new limit 40KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 320KB/sec, refill period 1000 ms [COMPLETE] request size 160 KB, new limit 80KB/sec, refill period 1000 ms [ OK ] RateLimiterTest.LimitChangeTest (5002 ms) [----------] 4 tests from RateLimiterTest (27620 ms total) [----------] Global test environment tear-down [==========] 4 tests from 1 test case ran. (27621 ms total) [ PASSED ] 4 tests. ``` Reviewers: sdong, IslamAbdelRahman, yiwu, andrewkr Reviewed By: andrewkr Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60207
2016-07-01 07:16:29 +00:00
}
TEST_F(RateLimiterTest, AutoTuneIncreaseWhenFull) {
const std::chrono::seconds kTimePerRefill(1);
const int kRefillsPerTune = 100; // needs to match util/rate_limiter.cc
Fix+clean up handling of mock sleeps (#7101) Summary: We have a number of tests hanging on MacOS and windows due to mishandling of code for mock sleeps. In addition, the code was in terrible shape because the same variable (addon_time_) would sometimes refer to microseconds and sometimes to seconds. One test even assumed it was nanoseconds but was written to pass anyway. This has been cleaned up so that DB tests generally use a SpecialEnv function to mock sleep, for either some number of microseconds or seconds depending on the function called. But to call one of these, the test must first call SetMockSleep (precondition enforced with assertion), which also turns sleeps in RocksDB into mock sleeps. To also removes accounting for actual clock time, call SetTimeElapseOnlySleepOnReopen, which implies SetMockSleep (on DB re-open). This latter setting only works by applying on DB re-open, otherwise havoc can ensue if Env goes back in time with DB open. More specifics: Removed some unused test classes, and updated comments on the general problem. Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead of mock time. For this we have the only modification to production code, inserting a sync point callback in flush_job.cc, which is not a change to production behavior. Removed unnecessary resetting of mock times to 0 in many tests. RocksDB deals in relative time. Any behaviors relying on absolute date/time are likely a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one clearly injecting a specific absolute time for actual testing convenience.) Just in case I misunderstood some test, I put this note in each replacement: // NOTE: Presumed unnecessary and removed: resetting mock time in env Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and FilterCompactionTimeTest in db_test.cc stats_history_test and blob_db_test are each their own beast, rather deeply dependent on MockTimeEnv. Each gets its own variant of a work-around for TimedWait in a mock time environment. (Reduces redundancy and inconsistency in stats_history_test.) Intended follow-up: Remove TimedWait from the public API of InstrumentedCondVar, and only make that accessible through Env by passing in an InstrumentedCondVar and a deadline. Then the Env implementations mocking time can fix this problem without using sync points. (Test infrastructure using sync points interferes with individual tests' control over sync points.) With that change, we can simplify/consolidate the scattered work-arounds. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101 Test Plan: make check on Linux and MacOS Reviewed By: zhichao-cao Differential Revision: D23032815 Pulled By: pdillinger fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
2020-08-11 19:39:49 +00:00
SpecialEnv special_env(Env::Default(), /*time_elapse_only_sleep*/ true);
auto stats = CreateDBStatistics();
std::unique_ptr<RateLimiter> rate_limiter(new GenericRateLimiter(
1000 /* rate_bytes_per_sec */,
std::chrono::microseconds(kTimePerRefill).count(), 10 /* fairness */,
RateLimiter::Mode::kWritesOnly, special_env.GetSystemClock(),
true /* auto_tuned */));
Simplify GenericRateLimiter algorithm (#8602) Summary: `GenericRateLimiter` slow path handles requests that cannot be satisfied immediately. Such requests enter a queue, and their thread stays in `Request()` until they are granted or the rate limiter is stopped. These threads are responsible for unblocking themselves. The work to do so is split into two main duties. (1) Waiting for the next refill time. (2) Refilling the bytes and granting requests. Prior to this PR, the slow path logic involved a leader election algorithm to pick one thread to perform (1) followed by (2). It elected the thread whose request was at the front of the highest priority non-empty queue since that request was most likely to be granted. This algorithm was efficient in terms of reducing intermediate wakeups, which is a thread waking up only to resume waiting after finding its request is not granted. However, the conceptual complexity of this algorithm was too high. It took me a long time to draw a timeline to understand how it works for just one edge case yet there were so many. This PR drops the leader election to reduce conceptual complexity. Now, the two duties can be performed by whichever thread acquires the lock first. The risk of this change is increasing the number of intermediate wakeups, however, we took steps to mitigate that. - `wait_until_refill_pending_` flag ensures only one thread performs (1). This\ prevents the thundering herd problem at the next refill time. The remaining\ threads wait on their condition variable with an unbounded duration -- thus we\ must remember to notify them to ensure forward progress. - (1) is typically done by a thread at the front of a queue. This is trivial\ when the queues are initially empty as the first choice that arrives must be\ the only entry in its queue. When queues are initially non-empty, we achieve\ this by having (2) notify a thread at the front of a queue (preferring higher\ priority) to perform the next duty. - We do not require any additional wakeup for (2). Typically it will just be\ done by the thread that finished (1). Combined, the second and third bullet points above suggest the refill/granting will typically be done by a request at the front of its queue. This is important because one wakeup is saved when a granted request happens to be in an already running thread. Note there are a few cases that still lead to intermediate wakeup, however. The first two are existing issues that also apply to the old algorithm, however, the third (including both subpoints) is new. - No request may be granted (only possible when rate limit dynamically\ decreases). - Requests from a different queue may be granted. - (2) may be run by a non-front request thread causing it to not be granted even\ if some requests in that same queue are granted. It can happen for a couple\ (unlikely) reasons. - A new request may sneak in and grab the lock at the refill time, before the\ thread finishing (1) can wake up and grab it. - A new request may sneak in and grab the lock and execute (1) before (2)'s\ chosen candidate can wake up and grab the lock. Then that non-front request\ thread performing (1) can carry over to perform (2). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602 Test Plan: - Use existing tests. The edge cases listed in the comment are all performance\ related; I could not really think of any related to correctness. The logic\ looks the same whether a thread wakes up/finishes its work early/on-time/late,\ or whether the thread is chosen vs. "steals" the work. - Verified write throughput and CPU overhead are basically the same with and\ without this change, even in a rate limiter heavy workload: Test command: ``` $ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000 ``` Results before this PR: ``` fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s 7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k ``` Results after this PR: ``` fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s 7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k ``` Reviewed By: hx235 Differential Revision: D30048013 Pulled By: ajkr fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
2021-08-09 23:46:14 +00:00
// Rate limiter uses `CondVar::TimedWait()`, which does not have access to the
// `Env` to advance its time according to the fake wait duration. The
// workaround is to install a callback that advance the `Env`'s mock time.
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->SetCallBack(
Simplify GenericRateLimiter algorithm (#8602) Summary: `GenericRateLimiter` slow path handles requests that cannot be satisfied immediately. Such requests enter a queue, and their thread stays in `Request()` until they are granted or the rate limiter is stopped. These threads are responsible for unblocking themselves. The work to do so is split into two main duties. (1) Waiting for the next refill time. (2) Refilling the bytes and granting requests. Prior to this PR, the slow path logic involved a leader election algorithm to pick one thread to perform (1) followed by (2). It elected the thread whose request was at the front of the highest priority non-empty queue since that request was most likely to be granted. This algorithm was efficient in terms of reducing intermediate wakeups, which is a thread waking up only to resume waiting after finding its request is not granted. However, the conceptual complexity of this algorithm was too high. It took me a long time to draw a timeline to understand how it works for just one edge case yet there were so many. This PR drops the leader election to reduce conceptual complexity. Now, the two duties can be performed by whichever thread acquires the lock first. The risk of this change is increasing the number of intermediate wakeups, however, we took steps to mitigate that. - `wait_until_refill_pending_` flag ensures only one thread performs (1). This\ prevents the thundering herd problem at the next refill time. The remaining\ threads wait on their condition variable with an unbounded duration -- thus we\ must remember to notify them to ensure forward progress. - (1) is typically done by a thread at the front of a queue. This is trivial\ when the queues are initially empty as the first choice that arrives must be\ the only entry in its queue. When queues are initially non-empty, we achieve\ this by having (2) notify a thread at the front of a queue (preferring higher\ priority) to perform the next duty. - We do not require any additional wakeup for (2). Typically it will just be\ done by the thread that finished (1). Combined, the second and third bullet points above suggest the refill/granting will typically be done by a request at the front of its queue. This is important because one wakeup is saved when a granted request happens to be in an already running thread. Note there are a few cases that still lead to intermediate wakeup, however. The first two are existing issues that also apply to the old algorithm, however, the third (including both subpoints) is new. - No request may be granted (only possible when rate limit dynamically\ decreases). - Requests from a different queue may be granted. - (2) may be run by a non-front request thread causing it to not be granted even\ if some requests in that same queue are granted. It can happen for a couple\ (unlikely) reasons. - A new request may sneak in and grab the lock at the refill time, before the\ thread finishing (1) can wake up and grab it. - A new request may sneak in and grab the lock and execute (1) before (2)'s\ chosen candidate can wake up and grab the lock. Then that non-front request\ thread performing (1) can carry over to perform (2). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8602 Test Plan: - Use existing tests. The edge cases listed in the comment are all performance\ related; I could not really think of any related to correctness. The logic\ looks the same whether a thread wakes up/finishes its work early/on-time/late,\ or whether the thread is chosen vs. "steals" the work. - Verified write throughput and CPU overhead are basically the same with and\ without this change, even in a rate limiter heavy workload: Test command: ``` $ rm -rf /dev/shm/dbbench/ && TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -benchmarks=fillrandom -num_multi_db=64 -num_low_pri_threads=64 -num_high_pri_threads=64 -write_buffer_size=262144 -target_file_size_base=262144 -max_bytes_for_level_base=1048576 -rate_limiter_bytes_per_sec=16777216 -key_size=24 -value_size=1000 -num=10000 -compression_type=none -rate_limiter_refill_period_us=1000 ``` Results before this PR: ``` fillrandom : 108.463 micros/op 9219 ops/sec; 9.0 MB/s 7.40user 8.84system 1:26.20elapsed 18%CPU (0avgtext+0avgdata 256140maxresident)k ``` Results after this PR: ``` fillrandom : 108.108 micros/op 9250 ops/sec; 9.0 MB/s 7.45user 8.23system 1:26.68elapsed 18%CPU (0avgtext+0avgdata 255688maxresident)k ``` Reviewed By: hx235 Differential Revision: D30048013 Pulled By: ajkr fbshipit-source-id: 6741bba9d9dfbccab359806d725105817fef818b
2021-08-09 23:46:14 +00:00
"GenericRateLimiter::Request:PostTimedWait", [&](void* arg) {
int64_t time_waited_us = *static_cast<int64_t*>(arg);
special_env.SleepForMicroseconds(static_cast<int>(time_waited_us));
});
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->EnableProcessing();
// verify rate limit increases after a sequence of periods where rate limiter
// is always drained
int64_t orig_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
rate_limiter->Request(orig_bytes_per_sec, Env::IO_HIGH, stats.get(),
RateLimiter::OpType::kWrite);
while (std::chrono::microseconds(special_env.NowMicros()) <=
kRefillsPerTune * kTimePerRefill) {
rate_limiter->Request(orig_bytes_per_sec, Env::IO_HIGH, stats.get(),
RateLimiter::OpType::kWrite);
}
int64_t new_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
ASSERT_GT(new_bytes_per_sec, orig_bytes_per_sec);
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->DisableProcessing();
Improve rate_limiter_test.cc (#8904) Summary: - Fixed a bug in `RateLimiterTest.GeneratePriorityIterationOrder` that the callbacks in this test were not called starting from `i = 1`. Fix by increasing `rate_bytes_per_sec` and requested bytes. - The bug is due to the previous `rate_bytes_per_sec` was set too small, resulting in `refill_bytes_per_period` less than `kMinRefillBytesPerPeriod`. Hence the actual `refill_bytes_per_period` was equal to `kMinRefillBytesPerPeriod` due to the logic [here](https://github.com/facebook/rocksdb/blob/main/util/rate_limiter.cc#L302-L303) and it ended up being greater than the previously set requested bytes. Therefore starting from `i = 1`, `RefillBytesAndGrantRequests()` and `GeneratePriorityIterationOrder` won't be called and the test callbacks was not triggered to execute the assertion. - Added internal flag to assert callbacks are called in `RateLimiterTest.GeneratePriorityIterationOrder` to prevent any future changes defeat the purpose of the test [as suggested](https://github.com/facebook/rocksdb/pull/8890#discussion_r704915134) - Increased `rate_bytes_per_sec` and bytes of each request in `RateLimiterTest.GetTotalBytesThrough`, `RateLimiterTest.GetTotalRequests`, `RateLimiterTest.GetTotalPendingRequests` to trigger the "long path" of execution (i.e, the one trigger RefillBytesAndGrantRequests()) to increase test coverage - This increased the running time of the three tests, see test plan for time difference running locally - Cleared up sync point effects after each test by calling `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearAllCallBacks();` in `~RateLimiterTest()` [as suggested](https://github.com/facebook/rocksdb/pull/8595/files#r697534279) - It's fine to call these two methods even when `EnableProcessing()` or `SetCallBack()` is not called in the test or is already cleaned up. In those cases, calling these two functions in destructor is effectively no-op. - This will allow cleaning up sync point effects of previous test even when the previous test failed in assertion. - Added missing `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in existing tests for completeness - Called `SyncPoint::GetInstance()->DisableProcessing();` and `SyncPoint::GetInstance()->ClearCallBacks(..);` in loop in `RateLimiterTest.GeneratePriorityIterationOrder` for completeness Pull Request resolved: https://github.com/facebook/rocksdb/pull/8904 Test Plan: - Passing existing tests - To verify the 1st change, run `RateLimiterTest.GeneratePriorityIterationOrder` with assertions of callbacks are indeed called under original `rate_bytes_per_sec` and request byte and under updated `rate_bytes_per_sec` and request byte. The former will fail the assertion while the latter succeeds. - Here is the increased test time due to the 3rd change mentioned above in the summary. The relevant 3 tests mentioned in total increase the test time by 6s (~6000/33848 = 17.7% of the original total test time), which IMO is acceptable for better test coverage through running the "long path". - current (run on branch rate_limiter_ut_improve locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (3000 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (3001 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (43349 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (43349 ms total) [ PASSED ] 10 tests. - previous (run on branch main locally) [ RUN ] RateLimiterTest.GetTotalBytesThrough [ OK ] RateLimiterTest.GetTotalBytesThrough (0 ms) [ RUN ] RateLimiterTest.GetTotalRequests [ OK ] RateLimiterTest.GetTotalRequests (0 ms) [ RUN ] RateLimiterTest.GetTotalPendingRequests [ OK ] RateLimiterTest.GetTotalPendingRequests (0 ms) ... [----------] 10 tests from RateLimiterTest (33848 ms total) [----------] Global test environment tear-down [==========] 10 tests from 1 test case ran. (33848 ms total) [ PASSED ] 10 tests. Reviewed By: ajkr Differential Revision: D30872544 Pulled By: hx235 fbshipit-source-id: ff894f5c1a4bef70e8e407d53b00be45f776b3e4
2021-09-17 15:52:20 +00:00
ROCKSDB_NAMESPACE::SyncPoint::GetInstance()->ClearCallBack(
"GenericRateLimiter::Request:PostTimedWait");
// decreases after a sequence of periods where rate limiter is not drained
orig_bytes_per_sec = new_bytes_per_sec;
special_env.SleepForMicroseconds(static_cast<int>(
kRefillsPerTune * std::chrono::microseconds(kTimePerRefill).count()));
// make a request so tuner can be triggered
rate_limiter->Request(1 /* bytes */, Env::IO_HIGH, stats.get(),
RateLimiter::OpType::kWrite);
new_bytes_per_sec = rate_limiter->GetSingleBurstBytes();
ASSERT_LT(new_bytes_per_sec, orig_bytes_per_sec);
}
TEST_F(RateLimiterTest, CreateGenericRateLimiterFromString) {
std::shared_ptr<RateLimiter> limiter;
ConfigOptions config_options;
std::string limiter_id = GenericRateLimiter::kClassName();
ASSERT_OK(RateLimiter::CreateFromString(config_options, limiter_id + ":1024",
&limiter));
ASSERT_NE(limiter, nullptr);
ASSERT_EQ(limiter->GetBytesPerSecond(), 1024U);
#ifndef ROCKSDB_LITE
ASSERT_OK(RateLimiter::CreateFromString(
config_options, "rate_bytes_per_sec=2048;id=" + limiter_id, &limiter));
ASSERT_NE(limiter, nullptr);
ASSERT_EQ(limiter->GetBytesPerSecond(), 2048U);
ASSERT_NOK(RateLimiter::CreateFromString(
config_options, "rate_bytes_per_sec=0;id=" + limiter_id, &limiter));
ASSERT_NOK(RateLimiter::CreateFromString(
config_options, "rate_bytes_per_sec=2048;fairness=0;id=" + limiter_id,
&limiter));
ASSERT_OK(
RateLimiter::CreateFromString(config_options,
"rate_bytes_per_sec=2048;refill_period_us="
"1024;fairness=42;auto_tuned=true;"
"mode=kReadsOnly;id=" +
limiter_id,
&limiter));
ASSERT_NE(limiter, nullptr);
auto opts =
limiter->GetOptions<GenericRateLimiter::GenericRateLimiterOptions>();
ASSERT_NE(opts, nullptr);
ASSERT_EQ(opts->max_bytes_per_sec, 2048);
ASSERT_EQ(opts->refill_period_us, 1024);
ASSERT_EQ(opts->fairness, 42);
ASSERT_EQ(opts->auto_tuned, true);
ASSERT_TRUE(limiter->IsRateLimited(RateLimiter::OpType::kRead));
ASSERT_FALSE(limiter->IsRateLimited(RateLimiter::OpType::kWrite));
#endif // ROCKSDB_LITE
}
#ifndef ROCKSDB_LITE
// This test is for a rate limiter that has no name (Name() returns "").
// When the default Name() method is deprecated, this test should be removed.
TEST_F(RateLimiterTest, NoNameRateLimiter) {
static std::unordered_map<std::string, OptionTypeInfo> dummy_limiter_options =
{
{"dummy",
{0, OptionType::kInt, OptionVerificationType::kNormal,
OptionTypeFlags::kNone}},
};
class NoNameRateLimiter : public RateLimiter {
public:
explicit NoNameRateLimiter(bool do_register) {
if (do_register) {
RegisterOptions("", &dummy, &dummy_limiter_options);
}
}
void SetBytesPerSecond(int64_t /*bytes_per_second*/) override {}
int64_t GetSingleBurstBytes() const override { return 0; }
int64_t GetTotalBytesThrough(const Env::IOPriority /*pri*/) const override {
return 0;
}
int64_t GetTotalRequests(const Env::IOPriority /*pri*/) const override {
return 0;
}
int64_t GetBytesPerSecond() const override { return 0; }
private:
int dummy;
};
ConfigOptions config_options;
DBOptions db_opts, copy;
db_opts.rate_limiter.reset(new NoNameRateLimiter(false));
ASSERT_EQ(db_opts.rate_limiter->GetId(), "");
ASSERT_EQ(db_opts.rate_limiter->ToString(config_options), "");
db_opts.rate_limiter.reset(new NoNameRateLimiter(true));
ASSERT_EQ(db_opts.rate_limiter->GetId(), "");
ASSERT_EQ(db_opts.rate_limiter->ToString(config_options), "");
std::string opt_str;
ASSERT_OK(GetStringFromDBOptions(config_options, db_opts, &opt_str));
ASSERT_OK(
GetDBOptionsFromString(config_options, DBOptions(), opt_str, &copy));
ASSERT_OK(
RocksDBOptionsParser::VerifyDBOptions(config_options, db_opts, copy));
ASSERT_EQ(copy.rate_limiter, nullptr);
ASSERT_NE(copy.rate_limiter, db_opts.rate_limiter);
}
#endif // ROCKSDB_LITE
} // namespace ROCKSDB_NAMESPACE
int main(int argc, char** argv) {
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
::testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}