rocksdb/table/table_test.cc

5880 lines
222 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
#include "rocksdb/table.h"
#include <gtest/gtest.h>
#include <stddef.h>
#include <stdio.h>
#include <algorithm>
#include <iostream>
#include <map>
#include <memory>
#include <string>
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
#include <unordered_set>
#include <vector>
#include "cache/lru_cache.h"
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
#include "db/db_test_util.h"
#include "db/dbformat.h"
#include "db/memtable.h"
#include "db/write_batch_internal.h"
#include "memtable/stl_wrappers.h"
#include "monitoring/statistics.h"
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
#include "options/options_helper.h"
#include "port/port.h"
#include "port/stack_trace.h"
#include "rocksdb/cache.h"
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
#include "rocksdb/compression_type.h"
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
#include "rocksdb/convenience.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/file_checksum.h"
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 22:47:08 +00:00
#include "rocksdb/file_system.h"
#include "rocksdb/filter_policy.h"
#include "rocksdb/iterator.h"
#include "rocksdb/memtablerep.h"
#include "rocksdb/options.h"
#include "rocksdb/perf_context.h"
#include "rocksdb/slice_transform.h"
#include "rocksdb/statistics.h"
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
#include "rocksdb/table_properties.h"
#include "rocksdb/trace_record.h"
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
#include "rocksdb/unique_id.h"
#include "rocksdb/write_buffer_manager.h"
#include "table/block_based/block.h"
#include "table/block_based/block_based_table_builder.h"
#include "table/block_based/block_based_table_factory.h"
#include "table/block_based/block_based_table_reader.h"
#include "table/block_based/block_builder.h"
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
#include "table/block_based/filter_policy_internal.h"
#include "table/block_based/flush_block_policy.h"
#include "table/block_fetcher.h"
#include "table/format.h"
#include "table/get_context.h"
#include "table/internal_iterator.h"
#include "table/meta_blocks.h"
#include "table/plain/plain_table_factory.h"
#include "table/scoped_arena_iterator.h"
#include "table/sst_file_writer_collectors.h"
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
#include "table/unique_id_impl.h"
#include "test_util/sync_point.h"
#include "test_util/testharness.h"
#include "test_util/testutil.h"
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
#include "util/coding_lean.h"
#include "util/compression.h"
#include "util/file_checksum_helper.h"
#include "util/random.h"
#include "util/string_util.h"
#include "utilities/memory_allocators.h"
#include "utilities/merge_operators.h"
namespace ROCKSDB_NAMESPACE {
extern const uint64_t kLegacyBlockBasedTableMagicNumber;
extern const uint64_t kLegacyPlainTableMagicNumber;
extern const uint64_t kBlockBasedTableMagicNumber;
extern const uint64_t kPlainTableMagicNumber;
namespace {
const std::string kDummyValue(10000, 'o');
// DummyPropertiesCollector used to test BlockBasedTableProperties
class DummyPropertiesCollector : public TablePropertiesCollector {
public:
const char* Name() const override { return "DummyPropertiesCollector"; }
Status Finish(UserCollectedProperties* /*properties*/) override {
return Status::OK();
}
Status Add(const Slice& /*user_key*/, const Slice& /*value*/) override {
return Status::OK();
}
UserCollectedProperties GetReadableProperties() const override {
return UserCollectedProperties{};
}
};
class DummyPropertiesCollectorFactory1
: public TablePropertiesCollectorFactory {
public:
TablePropertiesCollector* CreateTablePropertiesCollector(
TablePropertiesCollectorFactory::Context /*context*/) override {
return new DummyPropertiesCollector();
}
const char* Name() const override {
return "DummyPropertiesCollectorFactory1";
}
};
class DummyPropertiesCollectorFactory2
: public TablePropertiesCollectorFactory {
public:
TablePropertiesCollector* CreateTablePropertiesCollector(
TablePropertiesCollectorFactory::Context /*context*/) override {
return new DummyPropertiesCollector();
}
const char* Name() const override {
return "DummyPropertiesCollectorFactory2";
}
};
// Return reverse of "key".
// Used to test non-lexicographic comparators.
std::string Reverse(const Slice& key) {
auto rev = key.ToString();
std::reverse(rev.begin(), rev.end());
return rev;
}
class ReverseKeyComparator : public Comparator {
public:
const char* Name() const override {
return "rocksdb.ReverseBytewiseComparator";
}
int Compare(const Slice& a, const Slice& b) const override {
return BytewiseComparator()->Compare(Reverse(a), Reverse(b));
}
void FindShortestSeparator(std::string* start,
const Slice& limit) const override {
std::string s = Reverse(*start);
std::string l = Reverse(limit);
BytewiseComparator()->FindShortestSeparator(&s, l);
*start = Reverse(s);
}
void FindShortSuccessor(std::string* key) const override {
std::string s = Reverse(*key);
BytewiseComparator()->FindShortSuccessor(&s);
*key = Reverse(s);
}
};
ReverseKeyComparator reverse_key_comparator;
void Increment(const Comparator* cmp, std::string* key) {
if (cmp == BytewiseComparator()) {
key->push_back('\0');
} else {
assert(cmp == &reverse_key_comparator);
std::string rev = Reverse(*key);
rev.push_back('\0');
*key = Reverse(rev);
}
}
const auto kUnknownColumnFamily =
TablePropertiesCollectorFactory::Context::kUnknownColumnFamily;
} // namespace
// Helper class for tests to unify the interface between
// BlockBuilder/TableBuilder and Block/Table.
class Constructor {
public:
explicit Constructor(const Comparator* cmp)
: data_(stl_wrappers::LessOfComparator(cmp)) {}
virtual ~Constructor() {}
void Add(const std::string& key, const Slice& value) {
data_[key] = value.ToString();
}
// Finish constructing the data structure with all the keys that have
// been added so far. Returns the keys in sorted order in "*keys"
// and stores the key/value pairs in "*kvmap"
void Finish(const Options& options, const ImmutableOptions& ioptions,
const MutableCFOptions& moptions,
const BlockBasedTableOptions& table_options,
const InternalKeyComparator& internal_comparator,
std::vector<std::string>* keys, stl_wrappers::KVMap* kvmap) {
New stable, fixed-length cache keys (#9126) Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
2021-12-17 01:13:55 +00:00
last_internal_comparator_ = &internal_comparator;
*kvmap = data_;
keys->clear();
for (const auto& kv : data_) {
keys->push_back(kv.first);
}
data_.clear();
Status s = FinishImpl(options, ioptions, moptions, table_options,
internal_comparator, *kvmap);
ASSERT_TRUE(s.ok()) << s.ToString();
}
// Construct the data structure from the data in "data"
virtual Status FinishImpl(const Options& options,
const ImmutableOptions& ioptions,
const MutableCFOptions& moptions,
const BlockBasedTableOptions& table_options,
const InternalKeyComparator& internal_comparator,
const stl_wrappers::KVMap& data) = 0;
virtual InternalIterator* NewIterator(
const SliceTransform* prefix_extractor = nullptr) const = 0;
virtual const stl_wrappers::KVMap& data() { return data_; }
virtual bool IsArenaMode() const { return false; }
virtual DB* db() const { return nullptr; } // Overridden in DBConstructor
virtual bool AnywayDeleteIterator() const { return false; }
protected:
New stable, fixed-length cache keys (#9126) Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
2021-12-17 01:13:55 +00:00
const InternalKeyComparator* last_internal_comparator_;
private:
stl_wrappers::KVMap data_;
};
// A helper class that converts internal format keys into user keys
class KeyConvertingIterator : public InternalIterator {
public:
explicit KeyConvertingIterator(InternalIterator* iter,
bool arena_mode = false)
: iter_(iter), arena_mode_(arena_mode) {}
~KeyConvertingIterator() override {
if (arena_mode_) {
iter_->~InternalIterator();
} else {
delete iter_;
}
}
bool Valid() const override { return iter_->Valid() && status_.ok(); }
void Seek(const Slice& target) override {
ParsedInternalKey ikey(target, kMaxSequenceNumber, kTypeValue);
std::string encoded;
AppendInternalKey(&encoded, ikey);
iter_->Seek(encoded);
}
void SeekForPrev(const Slice& target) override {
ParsedInternalKey ikey(target, kMaxSequenceNumber, kTypeValue);
std::string encoded;
AppendInternalKey(&encoded, ikey);
iter_->SeekForPrev(encoded);
}
void SeekToFirst() override { iter_->SeekToFirst(); }
void SeekToLast() override { iter_->SeekToLast(); }
void Next() override { iter_->Next(); }
void Prev() override { iter_->Prev(); }
IterBoundCheck UpperBoundCheckResult() override {
return iter_->UpperBoundCheckResult();
}
Slice key() const override {
assert(Valid());
ParsedInternalKey parsed_key;
Status pik_status =
ParseInternalKey(iter_->key(), &parsed_key, true /* log_err_key */);
if (!pik_status.ok()) {
status_ = pik_status;
return Slice(status_.getState());
}
return parsed_key.user_key;
}
Slice value() const override { return iter_->value(); }
Status status() const override {
return status_.ok() ? iter_->status() : status_;
}
private:
mutable Status status_;
InternalIterator* iter_;
bool arena_mode_;
// No copying allowed
KeyConvertingIterator(const KeyConvertingIterator&);
void operator=(const KeyConvertingIterator&);
};
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
2020-07-08 00:25:08 +00:00
// `BlockConstructor` APIs always accept/return user keys.
class BlockConstructor : public Constructor {
public:
explicit BlockConstructor(const Comparator* cmp)
: Constructor(cmp), comparator_(cmp), block_(nullptr) {}
~BlockConstructor() override { delete block_; }
Status FinishImpl(const Options& /*options*/,
const ImmutableOptions& /*ioptions*/,
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
2020-07-08 00:25:08 +00:00
const MutableCFOptions& /*moptions*/,
const BlockBasedTableOptions& table_options,
const InternalKeyComparator& /*internal_comparator*/,
const stl_wrappers::KVMap& kv_map) override {
delete block_;
block_ = nullptr;
BlockBuilder builder(table_options.block_restart_interval);
for (const auto& kv : kv_map) {
// `DataBlockIter` assumes it reads only internal keys. `BlockConstructor`
// clients provide user keys, so we need to convert to internal key format
// before writing the data block.
ParsedInternalKey ikey(kv.first, kMaxSequenceNumber, kTypeValue);
std::string encoded;
AppendInternalKey(&encoded, ikey);
builder.Add(encoded, kv.second);
}
// Open the block
data_ = builder.Finish().ToString();
BlockContents contents;
contents.data = data_;
block_ = new Block(std::move(contents));
return Status::OK();
}
InternalIterator* NewIterator(
const SliceTransform* /*prefix_extractor*/) const override {
// `DataBlockIter` returns the internal keys it reads.
// `KeyConvertingIterator` converts them to user keys before they are
// exposed to the `BlockConstructor` clients.
return new KeyConvertingIterator(
block_->NewDataIterator(comparator_, kDisableGlobalSequenceNumber));
}
private:
const Comparator* comparator_;
std::string data_;
Block* block_;
BlockConstructor();
};
class TableConstructor : public Constructor {
public:
explicit TableConstructor(const Comparator* cmp,
bool convert_to_internal_key = false,
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
int level = -1, SequenceNumber largest_seqno = 0)
: Constructor(cmp),
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
largest_seqno_(largest_seqno),
convert_to_internal_key_(convert_to_internal_key),
level_(level) {
env_ = ROCKSDB_NAMESPACE::Env::Default();
}
~TableConstructor() override { Reset(); }
Status FinishImpl(const Options& options, const ImmutableOptions& ioptions,
const MutableCFOptions& moptions,
const BlockBasedTableOptions& /*table_options*/,
const InternalKeyComparator& internal_comparator,
const stl_wrappers::KVMap& kv_map) override {
Reset();
soptions.use_mmap_reads = ioptions.allow_mmap_reads;
std::unique_ptr<FSWritableFile> sink(new test::StringSink());
file_writer_.reset(new WritableFileWriter(
std::move(sink), "" /* don't care */, FileOptions()));
std::unique_ptr<TableBuilder> builder;
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
if (largest_seqno_ != 0) {
// Pretend that it's an external file written by SstFileWriter.
int_tbl_prop_collector_factories.emplace_back(
new SstFileWriterPropertiesCollectorFactory(2 /* version */,
0 /* global_seqno*/));
}
std::string column_family_name;
builder.reset(ioptions.table_factory->NewTableBuilder(
Reduce scope of compression dictionary to single SST (#4952) Summary: Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio. So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include: - The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called. - After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up. - Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952 Differential Revision: D13967980 Pulled By: ajkr fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
2019-02-12 03:42:25 +00:00
TableBuilderOptions(ioptions, moptions, internal_comparator,
&int_tbl_prop_collector_factories,
options.compression, options.compression_opts,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
kUnknownColumnFamily, column_family_name, level_),
file_writer_.get()));
for (const auto& kv : kv_map) {
if (convert_to_internal_key_) {
ParsedInternalKey ikey(kv.first, kMaxSequenceNumber, kTypeValue);
std::string encoded;
AppendInternalKey(&encoded, ikey);
builder->Add(encoded, kv.second);
} else {
builder->Add(kv.first, kv.second);
}
EXPECT_OK(builder->status());
}
Status s = builder->Finish();
EXPECT_OK(file_writer_->Flush());
rocksdb: Replace ASSERT* with EXPECT* in functions that does not return void value Summary: gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes. In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases. In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed: ```lang=bash % USE_CLANG=1 make all -j55 -k 2> build.log % perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \ build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number' % make format ``` After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest. This diff is independent and contains manual changes only in `util/testharness.h`. Test Plan: Make sure all tests are passing. ```lang=bash % USE_CLANG=1 make check ``` Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D33333
2015-03-17 03:52:32 +00:00
EXPECT_TRUE(s.ok()) << s.ToString();
EXPECT_EQ(TEST_GetSink()->contents().size(), builder->FileSize());
// Open the table
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
file_num_ = cur_file_num_++;
New stable, fixed-length cache keys (#9126) Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
2021-12-17 01:13:55 +00:00
return Reopen(ioptions, moptions);
}
InternalIterator* NewIterator(
const SliceTransform* prefix_extractor) const override {
InternalIterator* iter = table_reader_->NewIterator(
read_options_, prefix_extractor, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized);
if (convert_to_internal_key_) {
return new KeyConvertingIterator(iter);
} else {
return iter;
}
}
uint64_t ApproximateOffsetOf(const Slice& key) const {
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
if (convert_to_internal_key_) {
InternalKey ikey(key, kMaxSequenceNumber, kTypeValue);
const Slice skey = ikey.Encode();
return table_reader_->ApproximateOffsetOf(
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
read_options, skey, TableReaderCaller::kUncategorized);
}
return table_reader_->ApproximateOffsetOf(
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
read_options, key, TableReaderCaller::kUncategorized);
}
virtual Status Reopen(const ImmutableOptions& ioptions,
const MutableCFOptions& moptions) {
std::unique_ptr<FSRandomAccessFile> source(new test::StringSource(
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
TEST_GetSink()->contents(), file_num_, ioptions.allow_mmap_reads));
file_reader_.reset(new RandomAccessFileReader(std::move(source), "test"));
return ioptions.table_factory->NewTableReader(
Fast path for detecting unchanged prefix_extractor (#9407) Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
2022-01-21 19:36:36 +00:00
TableReaderOptions(ioptions, moptions.prefix_extractor, soptions,
New stable, fixed-length cache keys (#9126) Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
2021-12-17 01:13:55 +00:00
*last_internal_comparator_, /*skip_filters*/ false,
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
/*immortal*/ false, false, level_,
New stable, fixed-length cache keys (#9126) Summary: This change standardizes on a new 16-byte cache key format for block cache (incl compressed and secondary) and persistent cache (but not table cache and row cache). The goal is a really fast cache key with practically ideal stability and uniqueness properties without external dependencies (e.g. from FileSystem). A fixed key size of 16 bytes should enable future optimizations to the concurrent hash table for block cache, which is a heavy CPU user / bottleneck, but there appears to be measurable performance improvement even with no changes to LRUCache. This change replaces a lot of disjointed and ugly code handling cache keys with calls to a simple, clean new internal API (cache_key.h). (Preserving the old cache key logic under an option would be very ugly and likely negate the performance gain of the new approach. Complete replacement carries some inherent risk, but I think that's acceptable with sufficient analysis and testing.) The scheme for encoding new cache keys is complicated but explained in cache_key.cc. Also: EndianSwapValue is moved to math.h to be next to other bit operations. (Explains some new include "math.h".) ReverseBits operation added and unit tests added to hash_test for both. Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126 Test Plan: ### Basic correctness Several tests needed updates to work with the new functionality, mostly because we are no longer relying on filesystem for stable cache keys so table builders & readers need more context info to agree on cache keys. This functionality is so core, a huge number of existing tests exercise the cache key functionality. ### Performance Create db with `TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters` And test performance with `TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4` using DEBUG_LEVEL=0 and simultaneous before & after runs. Before ops/sec, avg over 100 runs: 121924 After ops/sec, avg over 100 runs: 125385 (+2.8%) ### Collision probability I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity over many months, by making some pessimistic simplifying assumptions: * Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys) * All of every file is cached for its entire lifetime We use a simple table with skewed address assignment and replacement on address collision to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output with `./cache_bench -stress_cache_key -sck_keep_bits=40`: ``` Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached) ``` These come from default settings of 2.5M files per day of 32 MB each, and `-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality. More default assumptions, relatively pessimistic: * 100 DBs in same process (doesn't matter much) * Re-open DB in same process (new session ID related to old session ID) on average every 100 files generated * Restart process (all new session IDs unrelated to old) 24 times per day After enough data, we get a result at the end: ``` (keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected) ``` If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data: ``` (keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected) (keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected) ``` The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases: ``` 197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected) ``` I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data. Reviewed By: zhichao-cao Differential Revision: D33171746 Pulled By: pdillinger fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
2021-12-17 01:13:55 +00:00
&block_cache_tracer_, moptions.write_buffer_size, "",
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
file_num_, kNullUniqueId64x2, largest_seqno_),
std::move(file_reader_), TEST_GetSink()->contents().size(),
&table_reader_);
}
virtual TableReader* GetTableReader() { return table_reader_.get(); }
bool AnywayDeleteIterator() const override {
return convert_to_internal_key_;
}
void ResetTableReader() { table_reader_.reset(); }
bool ConvertToInternalKey() { return convert_to_internal_key_; }
test::StringSink* TEST_GetSink() {
return static_cast<test::StringSink*>(file_writer_->writable_file());
}
BlockCacheTracer block_cache_tracer_;
private:
void Reset() {
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
file_num_ = 0;
table_reader_.reset();
file_writer_.reset();
file_reader_.reset();
}
const ReadOptions read_options_;
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
uint64_t file_num_;
std::unique_ptr<WritableFileWriter> file_writer_;
std::unique_ptr<RandomAccessFileReader> file_reader_;
std::unique_ptr<TableReader> table_reader_;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
SequenceNumber largest_seqno_;
bool convert_to_internal_key_;
int level_;
TableConstructor();
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
static uint64_t cur_file_num_;
EnvOptions soptions;
Env* env_;
};
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
uint64_t TableConstructor::cur_file_num_ = 1;
class MemTableConstructor : public Constructor {
public:
explicit MemTableConstructor(const Comparator* cmp, WriteBufferManager* wb)
: Constructor(cmp),
internal_comparator_(cmp),
write_buffer_manager_(wb),
table_factory_(new SkipListFactory) {
options_.memtable_factory = table_factory_;
ImmutableOptions ioptions(options_);
memtable_ =
new MemTable(internal_comparator_, ioptions, MutableCFOptions(options_),
wb, kMaxSequenceNumber, 0 /* column_family_id */);
memtable_->Ref();
}
~MemTableConstructor() override { delete memtable_->Unref(); }
Status FinishImpl(const Options&, const ImmutableOptions& ioptions,
const MutableCFOptions& /*moptions*/,
const BlockBasedTableOptions& /*table_options*/,
const InternalKeyComparator& /*internal_comparator*/,
const stl_wrappers::KVMap& kv_map) override {
delete memtable_->Unref();
ImmutableOptions mem_ioptions(ioptions);
memtable_ = new MemTable(internal_comparator_, mem_ioptions,
MutableCFOptions(options_), write_buffer_manager_,
kMaxSequenceNumber, 0 /* column_family_id */);
memtable_->Ref();
int seq = 1;
for (const auto& kv : kv_map) {
Integrity protection for live updates to WriteBatch (#7748) Summary: This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.). The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer. When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748 Test Plan: - an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught - add to stress/crash test to verify it works in variety of configs/operations without intentional corruption - [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc. Reviewed By: pdillinger Differential Revision: D25754492 Pulled By: ajkr fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
2021-01-29 20:17:17 +00:00
Status s = memtable_->Add(seq, kTypeValue, kv.first, kv.second,
nullptr /* kv_prot_info */);
if (!s.ok()) {
return s;
}
seq++;
}
return Status::OK();
}
InternalIterator* NewIterator(
const SliceTransform* /*prefix_extractor*/) const override {
return new KeyConvertingIterator(
memtable_->NewIterator(ReadOptions(), &arena_), true);
}
bool AnywayDeleteIterator() const override { return true; }
bool IsArenaMode() const override { return true; }
private:
mutable Arena arena_;
InternalKeyComparator internal_comparator_;
Options options_;
WriteBufferManager* write_buffer_manager_;
MemTable* memtable_;
std::shared_ptr<SkipListFactory> table_factory_;
};
class InternalIteratorFromIterator : public InternalIterator {
public:
explicit InternalIteratorFromIterator(Iterator* it) : it_(it) {}
bool Valid() const override { return it_->Valid(); }
void Seek(const Slice& target) override { it_->Seek(target); }
void SeekForPrev(const Slice& target) override { it_->SeekForPrev(target); }
void SeekToFirst() override { it_->SeekToFirst(); }
void SeekToLast() override { it_->SeekToLast(); }
void Next() override { it_->Next(); }
void Prev() override { it_->Prev(); }
Slice key() const override { return it_->key(); }
Slice value() const override { return it_->value(); }
Status status() const override { return it_->status(); }
private:
std::unique_ptr<Iterator> it_;
};
class DBConstructor : public Constructor {
public:
explicit DBConstructor(const Comparator* cmp)
: Constructor(cmp), comparator_(cmp) {
db_ = nullptr;
NewDB();
}
~DBConstructor() override { delete db_; }
Status FinishImpl(const Options& /*options*/,
const ImmutableOptions& /*ioptions*/,
const MutableCFOptions& /*moptions*/,
const BlockBasedTableOptions& /*table_options*/,
const InternalKeyComparator& /*internal_comparator*/,
const stl_wrappers::KVMap& kv_map) override {
delete db_;
db_ = nullptr;
NewDB();
for (const auto& kv : kv_map) {
WriteBatch batch;
EXPECT_OK(batch.Put(kv.first, kv.second));
rocksdb: Replace ASSERT* with EXPECT* in functions that does not return void value Summary: gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes. In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases. In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed: ```lang=bash % USE_CLANG=1 make all -j55 -k 2> build.log % perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \ build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number' % make format ``` After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest. This diff is independent and contains manual changes only in `util/testharness.h`. Test Plan: Make sure all tests are passing. ```lang=bash % USE_CLANG=1 make check ``` Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D33333
2015-03-17 03:52:32 +00:00
EXPECT_TRUE(db_->Write(WriteOptions(), &batch).ok());
}
return Status::OK();
}
InternalIterator* NewIterator(
const SliceTransform* /*prefix_extractor*/) const override {
return new InternalIteratorFromIterator(db_->NewIterator(ReadOptions()));
}
DB* db() const override { return db_; }
private:
void NewDB() {
std::string name = test::PerThreadDBPath("table_testdb");
Options options;
options.comparator = comparator_;
Status status = DestroyDB(name, options);
ASSERT_TRUE(status.ok()) << status.ToString();
options.create_if_missing = true;
options.error_if_exists = true;
options.write_buffer_size = 10000; // Something small to force merging
status = DB::Open(options, name, &db_);
ASSERT_TRUE(status.ok()) << status.ToString();
}
const Comparator* comparator_;
DB* db_;
};
enum TestType {
BLOCK_BASED_TABLE_TEST,
PLAIN_TABLE_SEMI_FIXED_PREFIX,
PLAIN_TABLE_FULL_STR_PREFIX,
PLAIN_TABLE_TOTAL_ORDER,
BLOCK_TEST,
MEMTABLE_TEST,
DB_TEST
};
struct TestArgs {
TestType type;
bool reverse_compare;
int restart_interval;
CompressionType compression;
uint32_t compression_parallel_threads;
uint32_t format_version;
bool use_mmap;
};
std::ostream& operator<<(std::ostream& os, const TestArgs& args) {
os << "type: " << args.type << " reverse_compare: " << args.reverse_compare
<< " restart_interval: " << args.restart_interval
<< " compression: " << args.compression
<< " compression_parallel_threads: " << args.compression_parallel_threads
<< " format_version: " << args.format_version
<< " use_mmap: " << args.use_mmap;
return os;
}
static std::vector<TestArgs> GenerateArgList() {
std::vector<TestArgs> test_args;
std::vector<TestType> test_types = {BLOCK_BASED_TABLE_TEST,
PLAIN_TABLE_SEMI_FIXED_PREFIX,
PLAIN_TABLE_FULL_STR_PREFIX,
PLAIN_TABLE_TOTAL_ORDER,
BLOCK_TEST,
MEMTABLE_TEST,
DB_TEST};
std::vector<bool> reverse_compare_types = {false, true};
std::vector<int> restart_intervals = {16, 1, 1024};
std::vector<uint32_t> compression_parallel_threads = {1, 4};
// Only add compression if it is supported
std::vector<std::pair<CompressionType, bool>> compression_types;
compression_types.emplace_back(kNoCompression, false);
if (Snappy_Supported()) {
compression_types.emplace_back(kSnappyCompression, false);
}
if (Zlib_Supported()) {
compression_types.emplace_back(kZlibCompression, false);
compression_types.emplace_back(kZlibCompression, true);
}
if (BZip2_Supported()) {
compression_types.emplace_back(kBZip2Compression, false);
compression_types.emplace_back(kBZip2Compression, true);
}
if (LZ4_Supported()) {
compression_types.emplace_back(kLZ4Compression, false);
compression_types.emplace_back(kLZ4Compression, true);
compression_types.emplace_back(kLZ4HCCompression, false);
compression_types.emplace_back(kLZ4HCCompression, true);
2014-02-08 02:12:30 +00:00
}
if (XPRESS_Supported()) {
compression_types.emplace_back(kXpressCompression, false);
compression_types.emplace_back(kXpressCompression, true);
}
if (ZSTD_Supported()) {
compression_types.emplace_back(kZSTD, false);
compression_types.emplace_back(kZSTD, true);
}
for (auto test_type : test_types) {
for (auto reverse_compare : reverse_compare_types) {
if (test_type == PLAIN_TABLE_SEMI_FIXED_PREFIX ||
test_type == PLAIN_TABLE_FULL_STR_PREFIX ||
test_type == PLAIN_TABLE_TOTAL_ORDER) {
// Plain table doesn't use restart index or compression.
TestArgs one_arg;
one_arg.type = test_type;
one_arg.reverse_compare = reverse_compare;
one_arg.restart_interval = restart_intervals[0];
one_arg.compression = compression_types[0].first;
one_arg.compression_parallel_threads = 1;
one_arg.format_version = 0;
one_arg.use_mmap = true;
test_args.push_back(one_arg);
one_arg.use_mmap = false;
test_args.push_back(one_arg);
continue;
}
for (auto restart_interval : restart_intervals) {
for (auto compression_type : compression_types) {
for (auto num_threads : compression_parallel_threads) {
TestArgs one_arg;
one_arg.type = test_type;
one_arg.reverse_compare = reverse_compare;
one_arg.restart_interval = restart_interval;
one_arg.compression = compression_type.first;
one_arg.compression_parallel_threads = num_threads;
one_arg.format_version = compression_type.second ? 2 : 1;
one_arg.use_mmap = false;
test_args.push_back(one_arg);
}
}
}
}
}
return test_args;
}
// In order to make all tests run for plain table format, including
// those operating on empty keys, create a new prefix transformer which
// return fixed prefix if the slice is not shorter than the prefix length,
// and the full slice if it is shorter.
class FixedOrLessPrefixTransform : public SliceTransform {
private:
const size_t prefix_len_;
public:
explicit FixedOrLessPrefixTransform(size_t prefix_len)
: prefix_len_(prefix_len) {}
const char* Name() const override { return "rocksdb.FixedPrefix"; }
Slice Transform(const Slice& src) const override {
assert(InDomain(src));
if (src.size() < prefix_len_) {
return src;
}
return Slice(src.data(), prefix_len_);
}
bool InDomain(const Slice& /*src*/) const override { return true; }
bool InRange(const Slice& dst) const override {
return (dst.size() <= prefix_len_);
}
bool FullLengthEnabled(size_t* /*len*/) const override { return false; }
};
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
class HarnessTest : public testing::Test {
public:
explicit HarnessTest(const TestArgs& args)
: args_(args),
ioptions_(options_),
moptions_(options_),
write_buffer_(options_.db_write_buffer_size),
support_prev_(true),
only_support_prefix_seek_(false) {
options_.compression = args_.compression;
options_.compression_opts.parallel_threads =
args_.compression_parallel_threads;
// Use shorter block size for tests to exercise block boundary
// conditions more.
if (args_.reverse_compare) {
options_.comparator = &reverse_key_comparator;
}
internal_comparator_.reset(
new test::PlainInternalKeyComparator(options_.comparator));
options_.allow_mmap_reads = args_.use_mmap;
switch (args_.type) {
case BLOCK_BASED_TABLE_TEST:
table_options_.flush_block_policy_factory.reset(
new FlushBlockBySizePolicyFactory());
table_options_.block_size = 256;
table_options_.block_restart_interval = args_.restart_interval;
table_options_.index_block_restart_interval = args_.restart_interval;
table_options_.format_version = args_.format_version;
options_.table_factory.reset(
new BlockBasedTableFactory(table_options_));
constructor_.reset(new TableConstructor(
options_.comparator, true /* convert_to_internal_key_ */));
internal_comparator_.reset(
new InternalKeyComparator(options_.comparator));
break;
case PLAIN_TABLE_SEMI_FIXED_PREFIX:
support_prev_ = false;
only_support_prefix_seek_ = true;
options_.prefix_extractor.reset(new FixedOrLessPrefixTransform(2));
options_.table_factory.reset(NewPlainTableFactory());
constructor_.reset(new TableConstructor(
options_.comparator, true /* convert_to_internal_key_ */));
internal_comparator_.reset(
new InternalKeyComparator(options_.comparator));
break;
case PLAIN_TABLE_FULL_STR_PREFIX:
support_prev_ = false;
only_support_prefix_seek_ = true;
options_.prefix_extractor.reset(NewNoopTransform());
options_.table_factory.reset(NewPlainTableFactory());
constructor_.reset(new TableConstructor(
options_.comparator, true /* convert_to_internal_key_ */));
internal_comparator_.reset(
new InternalKeyComparator(options_.comparator));
break;
case PLAIN_TABLE_TOTAL_ORDER:
support_prev_ = false;
only_support_prefix_seek_ = false;
options_.prefix_extractor = nullptr;
{
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = kPlainTableVariableLength;
plain_table_options.bloom_bits_per_key = 0;
plain_table_options.hash_table_ratio = 0;
options_.table_factory.reset(
NewPlainTableFactory(plain_table_options));
}
constructor_.reset(new TableConstructor(
options_.comparator, true /* convert_to_internal_key_ */));
internal_comparator_.reset(
new InternalKeyComparator(options_.comparator));
break;
case BLOCK_TEST:
table_options_.block_size = 256;
options_.table_factory.reset(
new BlockBasedTableFactory(table_options_));
constructor_.reset(new BlockConstructor(options_.comparator));
break;
case MEMTABLE_TEST:
table_options_.block_size = 256;
options_.table_factory.reset(
new BlockBasedTableFactory(table_options_));
constructor_.reset(
new MemTableConstructor(options_.comparator, &write_buffer_));
break;
case DB_TEST:
table_options_.block_size = 256;
options_.table_factory.reset(
new BlockBasedTableFactory(table_options_));
constructor_.reset(new DBConstructor(options_.comparator));
break;
}
ioptions_ = ImmutableOptions(options_);
moptions_ = MutableCFOptions(options_);
}
void Add(const std::string& key, const std::string& value) {
constructor_->Add(key, value);
}
void Test(Random* rnd) {
std::vector<std::string> keys;
stl_wrappers::KVMap data;
constructor_->Finish(options_, ioptions_, moptions_, table_options_,
*internal_comparator_, &keys, &data);
TestForwardScan(keys, data);
if (support_prev_) {
TestBackwardScan(keys, data);
}
TestRandomAccess(rnd, keys, data);
}
void TestForwardScan(const std::vector<std::string>& /*keys*/,
const stl_wrappers::KVMap& data) {
InternalIterator* iter = constructor_->NewIterator();
ASSERT_TRUE(!iter->Valid());
iter->SeekToFirst();
ASSERT_OK(iter->status());
for (stl_wrappers::KVMap::const_iterator model_iter = data.begin();
model_iter != data.end(); ++model_iter) {
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
iter->Next();
ASSERT_OK(iter->status());
}
ASSERT_TRUE(!iter->Valid());
ASSERT_OK(iter->status());
if (constructor_->IsArenaMode() && !constructor_->AnywayDeleteIterator()) {
iter->~InternalIterator();
} else {
delete iter;
}
}
void TestBackwardScan(const std::vector<std::string>& /*keys*/,
const stl_wrappers::KVMap& data) {
InternalIterator* iter = constructor_->NewIterator();
ASSERT_TRUE(!iter->Valid());
iter->SeekToLast();
ASSERT_OK(iter->status());
for (stl_wrappers::KVMap::const_reverse_iterator model_iter = data.rbegin();
model_iter != data.rend(); ++model_iter) {
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
iter->Prev();
ASSERT_OK(iter->status());
}
ASSERT_TRUE(!iter->Valid());
ASSERT_OK(iter->status());
if (constructor_->IsArenaMode() && !constructor_->AnywayDeleteIterator()) {
iter->~InternalIterator();
} else {
delete iter;
}
}
void TestRandomAccess(Random* rnd, const std::vector<std::string>& keys,
const stl_wrappers::KVMap& data) {
static const bool kVerbose = false;
InternalIterator* iter = constructor_->NewIterator();
ASSERT_TRUE(!iter->Valid());
stl_wrappers::KVMap::const_iterator model_iter = data.begin();
if (kVerbose) fprintf(stderr, "---\n");
for (int i = 0; i < 200; i++) {
const int toss = rnd->Uniform(support_prev_ ? 5 : 3);
switch (toss) {
case 0: {
if (iter->Valid()) {
if (kVerbose) fprintf(stderr, "Next\n");
iter->Next();
ASSERT_OK(iter->status());
++model_iter;
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
}
break;
}
case 1: {
if (kVerbose) fprintf(stderr, "SeekToFirst\n");
iter->SeekToFirst();
ASSERT_OK(iter->status());
model_iter = data.begin();
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
break;
}
case 2: {
std::string key = PickRandomKey(rnd, keys);
model_iter = data.lower_bound(key);
if (kVerbose)
fprintf(stderr, "Seek '%s'\n", EscapeString(key).c_str());
iter->Seek(Slice(key));
ASSERT_OK(iter->status());
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
break;
}
case 3: {
if (iter->Valid()) {
if (kVerbose) fprintf(stderr, "Prev\n");
iter->Prev();
ASSERT_OK(iter->status());
if (model_iter == data.begin()) {
model_iter = data.end(); // Wrap around to invalid value
} else {
--model_iter;
}
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
}
break;
}
case 4: {
if (kVerbose) fprintf(stderr, "SeekToLast\n");
iter->SeekToLast();
ASSERT_OK(iter->status());
if (keys.empty()) {
model_iter = data.end();
} else {
std::string last = data.rbegin()->first;
model_iter = data.lower_bound(last);
}
ASSERT_EQ(ToString(data, model_iter), ToString(iter));
break;
}
}
}
if (constructor_->IsArenaMode() && !constructor_->AnywayDeleteIterator()) {
iter->~InternalIterator();
} else {
delete iter;
}
}
std::string ToString(const stl_wrappers::KVMap& data,
const stl_wrappers::KVMap::const_iterator& it) {
if (it == data.end()) {
return "END";
} else {
return "'" + it->first + "->" + it->second + "'";
}
}
std::string ToString(const stl_wrappers::KVMap& data,
const stl_wrappers::KVMap::const_reverse_iterator& it) {
if (it == data.rend()) {
return "END";
} else {
return "'" + it->first + "->" + it->second + "'";
}
}
std::string ToString(const InternalIterator* it) {
if (!it->Valid()) {
return "END";
} else {
return "'" + it->key().ToString() + "->" + it->value().ToString() + "'";
}
}
std::string PickRandomKey(Random* rnd, const std::vector<std::string>& keys) {
if (keys.empty()) {
return "foo";
} else {
const int index = rnd->Uniform(static_cast<int>(keys.size()));
std::string result = keys[index];
switch (rnd->Uniform(support_prev_ ? 3 : 1)) {
case 0:
// Return an existing key
break;
case 1: {
// Attempt to return something smaller than an existing key
if (result.size() > 0 && result[result.size() - 1] > '\0' &&
(!only_support_prefix_seek_ ||
options_.prefix_extractor->Transform(result).size() <
result.size())) {
result[result.size() - 1]--;
}
break;
}
case 2: {
// Return something larger than an existing key
Increment(options_.comparator, &result);
break;
}
}
return result;
}
}
// Returns nullptr if not running against a DB
DB* db() const { return constructor_->db(); }
private:
TestArgs args_;
Options options_;
ImmutableOptions ioptions_;
MutableCFOptions moptions_;
BlockBasedTableOptions table_options_;
std::unique_ptr<Constructor> constructor_;
WriteBufferManager write_buffer_;
bool support_prev_;
bool only_support_prefix_seek_;
std::shared_ptr<InternalKeyComparator> internal_comparator_;
};
class ParameterizedHarnessTest : public HarnessTest,
public testing::WithParamInterface<TestArgs> {
public:
ParameterizedHarnessTest() : HarnessTest(GetParam()) {}
};
INSTANTIATE_TEST_CASE_P(TableTest, ParameterizedHarnessTest,
::testing::ValuesIn(GenerateArgList()));
class DBHarnessTest : public HarnessTest {
public:
DBHarnessTest()
: HarnessTest(TestArgs{DB_TEST, /* reverse_compare */ false,
/* restart_interval */ 16, kNoCompression,
/* compression_parallel_threads */ 1,
/* format_version */ 0, /* use_mmap */ false}) {}
};
static bool Between(uint64_t val, uint64_t low, uint64_t high) {
bool result = (val >= low) && (val <= high);
if (!result) {
fprintf(stderr, "Value %llu is not in range [%llu, %llu]\n",
(unsigned long long)(val), (unsigned long long)(low),
(unsigned long long)(high));
}
return result;
}
// Tests against all kinds of tables
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
class TableTest : public testing::Test {
public:
const InternalKeyComparator& GetPlainInternalComparator(
const Comparator* comp) {
if (!plain_internal_comparator) {
plain_internal_comparator.reset(
new test::PlainInternalKeyComparator(comp));
}
return *plain_internal_comparator;
}
void IndexTest(BlockBasedTableOptions table_options);
private:
std::unique_ptr<InternalKeyComparator> plain_internal_comparator;
};
class GeneralTableTest : public TableTest {};
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
class BlockBasedTableTestBase : public TableTest {};
class BlockBasedTableTest
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
: public BlockBasedTableTestBase,
virtual public ::testing::WithParamInterface<uint32_t> {
public:
BlockBasedTableTest() : format_(GetParam()) {
env_ = ROCKSDB_NAMESPACE::Env::Default();
}
BlockBasedTableOptions GetBlockBasedTableOptions() {
BlockBasedTableOptions options;
options.format_version = format_;
return options;
}
void SetupTracingTest(TableConstructor* c) {
test_path_ = test::PerThreadDBPath("block_based_table_tracing_test");
EXPECT_OK(env_->CreateDir(test_path_));
trace_file_path_ = test_path_ + "/block_cache_trace_file";
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
BlockCacheTraceWriterOptions trace_writer_opt;
BlockCacheTraceOptions trace_opt;
std::unique_ptr<TraceWriter> trace_writer;
EXPECT_OK(NewFileTraceWriter(env_, EnvOptions(), trace_file_path_,
&trace_writer));
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
std::unique_ptr<BlockCacheTraceWriter> block_cache_trace_writer =
NewBlockCacheTraceWriter(env_->GetSystemClock().get(), trace_writer_opt,
std::move(trace_writer));
ASSERT_NE(block_cache_trace_writer, nullptr);
// Always return Status::OK().
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
ASSERT_OK(c->block_cache_tracer_.StartTrace(
trace_opt, std::move(block_cache_trace_writer)));
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
{
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
InternalKey internal_key(auto_add_key1, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
c->Add(encoded_key, kDummyValue);
}
{
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
InternalKey internal_key(auto_add_key2, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
c->Add(encoded_key, kDummyValue);
}
}
void VerifyBlockAccessTrace(
TableConstructor* c,
const std::vector<BlockCacheTraceRecord>& expected_records) {
c->block_cache_tracer_.EndTrace();
{
std::unique_ptr<TraceReader> trace_reader;
Status s = NewFileTraceReader(env_, EnvOptions(), trace_file_path_,
&trace_reader);
EXPECT_OK(s);
BlockCacheTraceReader reader(std::move(trace_reader));
BlockCacheTraceHeader header;
EXPECT_OK(reader.ReadHeader(&header));
uint32_t index = 0;
while (s.ok()) {
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
SCOPED_TRACE("expected_records[" + std::to_string(index) + "]");
BlockCacheTraceRecord access;
s = reader.ReadAccess(&access);
if (!s.ok()) {
break;
}
ASSERT_LT(index, expected_records.size());
EXPECT_NE("", access.block_key);
EXPECT_EQ(access.block_type, expected_records[index].block_type);
EXPECT_GT(access.block_size, 0);
EXPECT_EQ(access.caller, expected_records[index].caller);
EXPECT_EQ(access.no_insert, expected_records[index].no_insert);
EXPECT_EQ(access.is_cache_hit, expected_records[index].is_cache_hit);
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
EXPECT_EQ(access.get_id, expected_records[index].get_id);
// The well-populated cases
if (access.caller == TableReaderCaller::kUserGet ||
(access.caller == TableReaderCaller::kUserMultiGet &&
access.block_type == TraceType::kBlockTraceDataBlock)) {
EXPECT_EQ(access.referenced_key,
expected_records[index].referenced_key);
EXPECT_EQ(access.get_from_user_specified_snapshot,
expected_records[index].get_from_user_specified_snapshot);
if (access.block_type == TraceType::kBlockTraceDataBlock) {
EXPECT_GT(access.referenced_data_size, 0);
EXPECT_GT(access.num_keys_in_block, 0);
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
if (access.caller == TableReaderCaller::kUserMultiGet) {
// Test num_keys_in_block estimate, assuming default restart
// interval of 16 and just one interval.
// Rounding depends on get_id.
if (access.get_id & 1) {
EXPECT_EQ(access.num_keys_in_block, 9);
} else {
EXPECT_EQ(access.num_keys_in_block, 8);
}
}
EXPECT_EQ(access.referenced_key_exist_in_block,
expected_records[index].referenced_key_exist_in_block);
}
} else {
EXPECT_EQ(access.referenced_key, "");
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
EXPECT_FALSE(access.get_from_user_specified_snapshot);
EXPECT_EQ(access.referenced_data_size, 0);
EXPECT_EQ(access.num_keys_in_block, 0);
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
EXPECT_FALSE(access.referenced_key_exist_in_block);
}
index++;
}
EXPECT_EQ(index, expected_records.size());
}
EXPECT_OK(env_->DeleteFile(trace_file_path_));
EXPECT_OK(env_->DeleteDir(test_path_));
}
protected:
uint64_t IndexUncompressedHelper(bool indexCompress);
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
const std::string auto_add_key1 = "aak01";
const std::string auto_add_key2 = "aak02";
private:
uint32_t format_;
Env* env_;
std::string trace_file_path_;
std::string test_path_;
};
class PlainTableTest : public TableTest {};
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
class TablePropertyTest : public testing::Test {};
class BBTTailPrefetchTest : public TableTest {};
// The helper class to test the file checksum
class FileChecksumTestHelper {
public:
FileChecksumTestHelper(bool convert_to_internal_key = false)
: convert_to_internal_key_(convert_to_internal_key) {}
~FileChecksumTestHelper() {}
void CreateWritableFile() {
sink_ = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink_);
file_writer_.reset(new WritableFileWriter(
std::move(holder), "" /* don't care */, FileOptions()));
}
void SetFileChecksumGenerator(FileChecksumGenerator* checksum_generator) {
if (file_writer_ != nullptr) {
file_writer_->TEST_SetFileChecksumGenerator(checksum_generator);
} else {
delete checksum_generator;
}
}
WritableFileWriter* GetFileWriter() { return file_writer_.get(); }
Status ResetTableBuilder(std::unique_ptr<TableBuilder>&& builder) {
assert(builder != nullptr);
table_builder_ = std::move(builder);
return Status::OK();
}
void AddKVtoKVMap(int num_entries) {
Random rnd(test::RandomSeed());
for (int i = 0; i < num_entries; i++) {
std::string v = rnd.RandomString(100);
kv_map_[test::RandomKey(&rnd, 20)] = v;
}
}
Status WriteKVAndFlushTable() {
for (const auto& kv : kv_map_) {
if (convert_to_internal_key_) {
ParsedInternalKey ikey(kv.first, kMaxSequenceNumber, kTypeValue);
std::string encoded;
AppendInternalKey(&encoded, ikey);
table_builder_->Add(encoded, kv.second);
} else {
table_builder_->Add(kv.first, kv.second);
}
EXPECT_TRUE(table_builder_->status().ok());
}
Status s = table_builder_->Finish();
EXPECT_OK(file_writer_->Flush());
EXPECT_OK(s);
EXPECT_EQ(sink_->contents().size(), table_builder_->FileSize());
return s;
}
std::string GetFileChecksum() {
EXPECT_OK(file_writer_->Close());
return table_builder_->GetFileChecksum();
}
const char* GetFileChecksumFuncName() {
return table_builder_->GetFileChecksumFuncName();
}
Status CalculateFileChecksum(FileChecksumGenerator* file_checksum_generator,
std::string* checksum) {
assert(file_checksum_generator != nullptr);
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
cur_file_num_ = checksum_file_num_++;
test::StringSink* ss_rw =
static_cast<test::StringSink*>(file_writer_->writable_file());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(ss_rw->contents()));
file_reader_.reset(new RandomAccessFileReader(std::move(source), "test"));
std::unique_ptr<char[]> scratch(new char[2048]);
Slice result;
uint64_t offset = 0;
Status s;
s = file_reader_->Read(IOOptions(), offset, 2048, &result, scratch.get(),
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
nullptr, Env::IO_TOTAL /* rate_limiter_priority */);
if (!s.ok()) {
return s;
}
while (result.size() != 0) {
file_checksum_generator->Update(scratch.get(), result.size());
offset += static_cast<uint64_t>(result.size());
s = file_reader_->Read(IOOptions(), offset, 2048, &result, scratch.get(),
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
nullptr,
Env::IO_TOTAL /* rate_limiter_priority */);
if (!s.ok()) {
return s;
}
}
EXPECT_EQ(offset, static_cast<uint64_t>(table_builder_->FileSize()));
file_checksum_generator->Finalize();
*checksum = file_checksum_generator->GetChecksum();
return Status::OK();
}
private:
bool convert_to_internal_key_;
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
uint64_t cur_file_num_;
std::unique_ptr<WritableFileWriter> file_writer_;
std::unique_ptr<RandomAccessFileReader> file_reader_;
std::unique_ptr<TableBuilder> table_builder_;
stl_wrappers::KVMap kv_map_;
test::StringSink* sink_ = nullptr;
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
static uint64_t checksum_file_num_;
};
Always verify SST unique IDs on SST file open (#10532) Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
2022-09-08 05:52:42 +00:00
uint64_t FileChecksumTestHelper::checksum_file_num_ = 1;
INSTANTIATE_TEST_CASE_P(FormatVersions, BlockBasedTableTest,
testing::ValuesIn(test::kFooterFormatVersionsToTest));
// This test serves as the living tutorial for the prefix scan of user collected
// properties.
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(TablePropertyTest, PrefixScanTest) {
UserCollectedProperties props{
{"num.111.1", "1"}, {"num.111.2", "2"}, {"num.111.3", "3"},
{"num.333.1", "1"}, {"num.333.2", "2"}, {"num.333.3", "3"},
{"num.555.1", "1"}, {"num.555.2", "2"}, {"num.555.3", "3"},
};
// prefixes that exist
for (const std::string prefix : {"num.111", "num.333", "num.555"}) {
int num = 0;
for (auto pos = props.lower_bound(prefix);
pos != props.end() &&
pos->first.compare(0, prefix.size(), prefix) == 0;
++pos) {
++num;
auto key = prefix + "." + std::to_string(num);
ASSERT_EQ(key, pos->first);
ASSERT_EQ(std::to_string(num), pos->second);
}
ASSERT_EQ(3, num);
}
// prefixes that don't exist
for (const std::string prefix :
{"num.000", "num.222", "num.444", "num.666"}) {
auto pos = props.lower_bound(prefix);
ASSERT_TRUE(pos == props.end() ||
pos->first.compare(0, prefix.size(), prefix) != 0);
}
}
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
namespace {
struct TestIds {
UniqueId64x3 internal_id;
UniqueId64x3 external_id;
};
inline bool operator==(const TestIds& lhs, const TestIds& rhs) {
return lhs.internal_id == rhs.internal_id &&
lhs.external_id == rhs.external_id;
}
std::ostream& operator<<(std::ostream& os, const TestIds& ids) {
return os << std::hex << "{{{ 0x" << ids.internal_id[0] << "U, 0x"
<< ids.internal_id[1] << "U, 0x" << ids.internal_id[2]
<< "U }}, {{ 0x" << ids.external_id[0] << "U, 0x"
<< ids.external_id[1] << "U, 0x" << ids.external_id[2] << "U }}}";
}
TestIds GetUniqueId(TableProperties* tp, std::unordered_set<uint64_t>* seen,
const std::string& db_id, const std::string& db_session_id,
uint64_t file_number) {
// First test session id logic
if (db_session_id.size() == 20) {
uint64_t upper;
uint64_t lower;
EXPECT_OK(DecodeSessionId(db_session_id, &upper, &lower));
EXPECT_EQ(EncodeSessionId(upper, lower), db_session_id);
}
// Get external using public API
tp->db_id = db_id;
tp->db_session_id = db_session_id;
tp->orig_file_number = file_number;
TestIds t;
{
std::string euid;
EXPECT_OK(GetExtendedUniqueIdFromTableProperties(*tp, &euid));
EXPECT_EQ(euid.size(), 24U);
t.external_id[0] = DecodeFixed64(&euid[0]);
t.external_id[1] = DecodeFixed64(&euid[8]);
t.external_id[2] = DecodeFixed64(&euid[16]);
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
std::string uid;
EXPECT_OK(GetUniqueIdFromTableProperties(*tp, &uid));
EXPECT_EQ(uid.size(), 16U);
EXPECT_EQ(uid, euid.substr(0, 16));
EXPECT_EQ(t.external_id[0], DecodeFixed64(&uid[0]));
EXPECT_EQ(t.external_id[1], DecodeFixed64(&uid[8]));
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
}
// All these should be effectively random
EXPECT_TRUE(seen->insert(t.external_id[0]).second);
EXPECT_TRUE(seen->insert(t.external_id[1]).second);
EXPECT_TRUE(seen->insert(t.external_id[2]).second);
// Get internal with internal API
EXPECT_OK(GetSstInternalUniqueId(db_id, db_session_id, file_number,
&t.internal_id));
EXPECT_NE(t.internal_id, kNullUniqueId64x3);
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
// Verify relationship
UniqueId64x3 tmp = t.internal_id;
InternalUniqueIdToExternal(&tmp);
EXPECT_EQ(tmp, t.external_id);
ExternalUniqueIdToInternal(&tmp);
EXPECT_EQ(tmp, t.internal_id);
// And 128-bit internal version
UniqueId64x2 tmp2{};
EXPECT_OK(GetSstInternalUniqueId(db_id, db_session_id, file_number, &tmp2));
EXPECT_NE(tmp2, kNullUniqueId64x2);
EXPECT_EQ(tmp2[0], t.internal_id[0]);
EXPECT_EQ(tmp2[1], t.internal_id[1]);
InternalUniqueIdToExternal(&tmp2);
EXPECT_EQ(tmp2[0], t.external_id[0]);
EXPECT_EQ(tmp2[1], t.external_id[1]);
ExternalUniqueIdToInternal(&tmp2);
EXPECT_EQ(tmp2[0], t.internal_id[0]);
EXPECT_EQ(tmp2[1], t.internal_id[1]);
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
return t;
}
} // namespace
TEST_F(TablePropertyTest, UniqueIdsSchemaAndQuality) {
// To ensure the computation only depends on the expected entries, we set
// the rest randomly
TableProperties tp;
TEST_SetRandomTableProperties(&tp);
// DB id is normally RFC-4122
const std::string db_id1 = "7265b6eb-4e42-4aec-86a4-0dc5e73a228d";
// Allow other forms of DB id
const std::string db_id2 = "1728000184588763620";
const std::string db_id3 = "x";
// DB session id is normally 20 chars in base-36, but 13 to 24 chars
// is ok, roughly 64 to 128 bits.
const std::string ses_id1 = "ABCDEFGHIJ0123456789";
// Same trailing 13 digits
const std::string ses_id2 = "HIJ0123456789";
const std::string ses_id3 = "0123ABCDEFGHIJ0123456789";
// Different trailing 12 digits
const std::string ses_id4 = "ABCDEFGH888888888888";
// And change length
const std::string ses_id5 = "ABCDEFGHIJ012";
const std::string ses_id6 = "ABCDEFGHIJ0123456789ABCD";
using T = TestIds;
std::unordered_set<uint64_t> seen;
// Establish a stable schema for the unique IDs. These values must not
// change for existing table files.
// (Note: parens needed for macro parsing, extra braces needed for some
// compilers.)
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id1, 1),
T({{{0x61d7dcf415d9cf19U, 0x160d77aae90757fdU, 0x907f41dfd90724ffU}},
{{0xf0bd230365df7464U, 0xca089303f3648eb4U, 0x4b44f7e7324b2817U}}}));
// Only change internal_id[1] with file number
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id1, 2),
T({{{0x61d7dcf415d9cf19U, 0x160d77aae90757feU, 0x907f41dfd90724ffU}},
{{0xf13fdf7adcfebb6dU, 0x97cd2226cc033ea2U, 0x198c438182091f0eU}}}));
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id1, 123456789),
T({{{0x61d7dcf415d9cf19U, 0x160d77aaee5c9ae9U, 0x907f41dfd90724ffU}},
{{0x81fbcebe1ac6c4f0U, 0x6b14a64cfdc0f1c4U, 0x7d8fb6eaf18edbb3U}}}));
// Change internal_id[1] and internal_id[2] with db_id
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id2, ses_id1, 1),
T({{{0x61d7dcf415d9cf19U, 0xf89c471f572f0d25U, 0x1f0f2a5eb0e6257eU}},
{{0x7f1d01d453616991U, 0x32ddf2afec804ab2U, 0xd10a1ee2f0c7d9c1U}}}));
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id3, ses_id1, 1),
T({{{0x61d7dcf415d9cf19U, 0xfed297a8154a57d0U, 0x8b931b9cdebd9e8U}},
{{0x62b2f43183f6894bU, 0x897ff2b460eefad1U, 0xf4ec189fb2d15e04U}}}));
// Keeping same last 13 digits of ses_id keeps same internal_id[0]
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id2, 1),
T({{{0x61d7dcf415d9cf19U, 0x5f6cc4fa2d528c8U, 0x7b70845d5bfb5446U}},
{{0x96d1c83ffcc94266U, 0x82663eac0ec6e14aU, 0x94a88b49678b77f6U}}}));
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id3, 1),
T({{{0x61d7dcf415d9cf19U, 0xfc7232879db37ea2U, 0xc0378d74ea4c89cdU}},
{{0xdf2ef57e98776905U, 0xda5b31c987da833bU, 0x79c1b4bd0a9e760dU}}}));
// Changing last 12 digits of ses_id only changes internal_id[0]
// (vs. db_id1, ses_id1, 1)
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id4, 1),
T({{{0x4f07cc0d003a83a8U, 0x160d77aae90757fdU, 0x907f41dfd90724ffU}},
{{0xbcf85336a9f71f04U, 0x4f2949e2f3adb60dU, 0x9ca0def976abfa10U}}}));
// ses_id can change everything.
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id5, 1),
T({{{0x94b8768e43f87ce6U, 0xc2559653ac4e7c93U, 0xde6dff6bbb1223U}},
{{0x5a9537af681817fbU, 0x1afcd1fecaead5eaU, 0x767077ad9ebe0008U}}}));
EXPECT_EQ(
GetUniqueId(&tp, &seen, db_id1, ses_id6, 1),
T({{{0x43cfb0ffa3b710edU, 0x263c580426406a1bU, 0xfacc91379a80d29dU}},
{{0xfa90547d84cb1cdbU, 0x2afe99c641992d4aU, 0x205b7f7b60e51cc2U}}}));
// Now verify more thoroughly that any small change in inputs completely
// changes external unique id.
// (Relying on 'seen' checks etc. in GetUniqueId)
std::string db_id = "00000000-0000-0000-0000-000000000000";
std::string ses_id = "000000000000000000000000";
uint64_t file_num = 1;
// change db_id
for (size_t i = 0; i < db_id.size(); ++i) {
if (db_id[i] == '-') {
continue;
}
for (char alt : std::string("123456789abcdef")) {
db_id[i] = alt;
GetUniqueId(&tp, &seen, db_id, ses_id, file_num);
}
db_id[i] = '0';
}
// change ses_id
for (size_t i = 0; i < ses_id.size(); ++i) {
for (char alt : std::string("123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ")) {
ses_id[i] = alt;
GetUniqueId(&tp, &seen, db_id, ses_id, file_num);
}
ses_id[i] = '0';
}
// change file_num
for (int i = 1; i < 64; ++i) {
GetUniqueId(&tp, &seen, db_id, ses_id, file_num << i);
}
// Verify that "all zeros" in first 128 bits is equivalent for internal and
// external IDs. This way, as long as we avoid "all zeros" in internal IDs,
// we avoid it in external IDs.
{
UniqueId64x3 id1{{0, 0, Random::GetTLSInstance()->Next64()}};
UniqueId64x3 id2 = id1;
InternalUniqueIdToExternal(&id1);
EXPECT_EQ(id1, id2);
ExternalUniqueIdToInternal(&id2);
EXPECT_EQ(id1, id2);
}
}
namespace {
void SetGoodTableProperties(TableProperties* tp) {
// To ensure the computation only depends on the expected entries, we set
// the rest randomly
TEST_SetRandomTableProperties(tp);
tp->db_id = "7265b6eb-4e42-4aec-86a4-0dc5e73a228d";
tp->db_session_id = "ABCDEFGHIJ0123456789";
tp->orig_file_number = 1;
}
} // namespace
TEST_F(TablePropertyTest, UniqueIdHumanStrings) {
TableProperties tp;
SetGoodTableProperties(&tp);
std::string tmp;
EXPECT_OK(GetExtendedUniqueIdFromTableProperties(tp, &tmp));
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
EXPECT_EQ(tmp,
(std::string{{'\x64', '\x74', '\xdf', '\x65', '\x03', '\x23',
'\xbd', '\xf0', '\xb4', '\x8e', '\x64', '\xf3',
'\x03', '\x93', '\x08', '\xca', '\x17', '\x28',
'\x4b', '\x32', '\xe7', '\xf7', '\x44', '\x4b'}}));
EXPECT_EQ(UniqueIdToHumanString(tmp),
"6474DF650323BDF0-B48E64F3039308CA-17284B32E7F7444B");
EXPECT_OK(GetUniqueIdFromTableProperties(tp, &tmp));
EXPECT_EQ(UniqueIdToHumanString(tmp), "6474DF650323BDF0-B48E64F3039308CA");
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
// including zero padding
tmp = std::string(24U, '\0');
tmp[15] = '\x12';
tmp[23] = '\xAB';
EXPECT_EQ(UniqueIdToHumanString(tmp),
"0000000000000000-0000000000000012-00000000000000AB");
// And shortened
tmp = std::string(20U, '\0');
tmp[5] = '\x12';
tmp[10] = '\xAB';
tmp[17] = '\xEF';
EXPECT_EQ(UniqueIdToHumanString(tmp),
"0000000000120000-0000AB0000000000-00EF0000");
tmp.resize(16);
EXPECT_EQ(UniqueIdToHumanString(tmp), "0000000000120000-0000AB0000000000");
tmp.resize(11);
EXPECT_EQ(UniqueIdToHumanString(tmp), "0000000000120000-0000AB");
tmp.resize(6);
EXPECT_EQ(UniqueIdToHumanString(tmp), "000000000012");
// Also internal IDs to human string
UniqueId64x3 euid = {12345, 678, 9};
EXPECT_EQ(InternalUniqueIdToHumanString(&euid), "{12345,678,9}");
UniqueId64x2 uid = {1234, 567890};
EXPECT_EQ(InternalUniqueIdToHumanString(&uid), "{1234,567890}");
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
}
TEST_F(TablePropertyTest, UniqueIdsFailure) {
TableProperties tp;
std::string tmp;
// Missing DB id
SetGoodTableProperties(&tp);
tp.db_id = "";
EXPECT_TRUE(GetUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
EXPECT_TRUE(
GetExtendedUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
// Missing session id
SetGoodTableProperties(&tp);
tp.db_session_id = "";
EXPECT_TRUE(GetUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
EXPECT_TRUE(
GetExtendedUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
// Missing file number
SetGoodTableProperties(&tp);
tp.orig_file_number = 0;
EXPECT_TRUE(GetUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
EXPECT_TRUE(
GetExtendedUniqueIdFromTableProperties(tp, &tmp).IsNotSupported());
Experimental support for SST unique IDs (#8990) Summary: * New public header unique_id.h and function GetUniqueIdFromTableProperties which computes a universally unique identifier based on table properties of table files from recent RocksDB versions. * Generation of DB session IDs is refactored so that they are guaranteed unique in the lifetime of a process running RocksDB. (SemiStructuredUniqueIdGen, new test included.) Along with file numbers, this enables SST unique IDs to be guaranteed unique among SSTs generated in a single process, and "better than random" between processes. See https://github.com/pdillinger/unique_id * In addition to public API producing 'external' unique IDs, there is a function for producing 'internal' unique IDs, with functions for converting between the two. In short, the external ID is "safe" for things people might do with it, and the internal ID enables more "power user" features for the future. Specifically, the external ID goes through a hashing layer so that any subset of bits in the external ID can be used as a hash of the full ID, while also preserving uniqueness guarantees in the first 128 bits (bijective both on first 128 bits and on full 192 bits). Intended follow-up: * Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into the third 64-bit value of the unique ID.) * Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968) Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990 Test Plan: Unit tests added, and checking of unique ids in stress test. NOTE in stress test we do not generate nearly enough files to thoroughly stress uniqueness, but the test trims off pieces of the ID to check for uniqueness so that we can infer (with some assumptions) stronger properties in the aggregate. Reviewed By: zhichao-cao, mrambacher Differential Revision: D31582865 Pulled By: pdillinger fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
2021-10-19 06:28:28 +00:00
}
// This test include all the basic checks except those for index size and block
// size, which will be conducted in separated unit tests.
TEST_P(BlockBasedTableTest, BasicBlockBasedTableProperties) {
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("a1", "val1");
c.Add("b2", "val2");
c.Add("c3", "val3");
c.Add("d4", "val4");
c.Add("e5", "val5");
c.Add("f6", "val6");
c.Add("g7", "val7");
c.Add("h8", "val8");
c.Add("j9", "val9");
uint64_t diff_internal_user_bytes = 9 * 8; // 8 is seq size, 9 k-v totally
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
options.compression = kNoCompression;
options.statistics = CreateDBStatistics();
options.statistics->set_stats_level(StatsLevel::kAll);
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_restart_interval = 1;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
ASSERT_EQ(
options.statistics->getTickerCount(NUMBER_BLOCK_COMPRESSION_REJECTED), 0);
auto& props = *c.GetTableReader()->GetTableProperties();
ASSERT_EQ(kvmap.size(), props.num_entries);
auto raw_key_size = kvmap.size() * 2ul;
auto raw_value_size = kvmap.size() * 4ul;
ASSERT_EQ(raw_key_size + diff_internal_user_bytes, props.raw_key_size);
ASSERT_EQ(raw_value_size, props.raw_value_size);
ASSERT_EQ(1ul, props.num_data_blocks);
ASSERT_EQ("", props.filter_policy_name); // no filter policy is used
// Verify data size.
BlockBuilder block_builder(1);
for (const auto& item : kvmap) {
block_builder.Add(item.first, item.second);
}
Slice content = block_builder.Finish();
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
ASSERT_EQ(content.size() + BlockBasedTable::kBlockTrailerSize +
diff_internal_user_bytes,
props.data_size);
c.ResetTableReader();
}
#ifdef SNAPPY
uint64_t BlockBasedTableTest::IndexUncompressedHelper(bool compressed) {
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
constexpr size_t kNumKeys = 10000;
for (size_t k = 0; k < kNumKeys; ++k) {
c.Add("key" + std::to_string(k), "val" + std::to_string(k));
}
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
options.compression = kSnappyCompression;
options.statistics = CreateDBStatistics();
options.statistics->set_stats_level(StatsLevel::kAll);
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_restart_interval = 1;
table_options.enable_index_compression = compressed;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
c.ResetTableReader();
return options.statistics->getTickerCount(NUMBER_BLOCK_COMPRESSED);
}
TEST_P(BlockBasedTableTest, IndexUncompressed) {
uint64_t tbl1_compressed_cnt = IndexUncompressedHelper(true);
uint64_t tbl2_compressed_cnt = IndexUncompressedHelper(false);
// tbl1_compressed_cnt should include 1 index block
EXPECT_EQ(tbl2_compressed_cnt + 1, tbl1_compressed_cnt);
}
#endif // SNAPPY
TEST_P(BlockBasedTableTest, BlockBasedTableProperties2) {
TableConstructor c(&reverse_key_comparator);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
{
Options options;
options.compression = CompressionType::kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
auto& props = *c.GetTableReader()->GetTableProperties();
// Default comparator
ASSERT_EQ("leveldb.BytewiseComparator", props.comparator_name);
// No merge operator
ASSERT_EQ("nullptr", props.merge_operator_name);
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
// No prefix extractor
ASSERT_EQ("nullptr", props.prefix_extractor_name);
// No property collectors
ASSERT_EQ("[]", props.property_collectors_names);
// No filter policy is used
ASSERT_EQ("", props.filter_policy_name);
// Compression type == that set:
ASSERT_EQ("NoCompression", props.compression_name);
c.ResetTableReader();
}
{
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
options.comparator = &reverse_key_comparator;
options.merge_operator = MergeOperators::CreateUInt64AddOperator();
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
options.prefix_extractor.reset(NewNoopTransform());
options.table_properties_collector_factories.emplace_back(
new DummyPropertiesCollectorFactory1());
options.table_properties_collector_factories.emplace_back(
new DummyPropertiesCollectorFactory2());
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
auto& props = *c.GetTableReader()->GetTableProperties();
ASSERT_EQ("rocksdb.ReverseBytewiseComparator", props.comparator_name);
ASSERT_EQ("UInt64AddOperator", props.merge_operator_name);
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
ASSERT_EQ("rocksdb.Noop", props.prefix_extractor_name);
ASSERT_EQ(
"[DummyPropertiesCollectorFactory1,DummyPropertiesCollectorFactory2]",
props.property_collectors_names);
ASSERT_EQ("", props.filter_policy_name); // no filter policy is used
c.ResetTableReader();
}
}
TEST_P(BlockBasedTableTest, RangeDelBlock) {
TableConstructor c(BytewiseComparator());
std::vector<std::string> keys = {"1pika", "2chu"};
std::vector<std::string> vals = {"p", "c"};
Cache fragmented range tombstones in BlockBasedTableReader (#4493) Summary: This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses. On the same DB used in #4449, running `readrandom` results in the following: ``` readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found) ``` Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results): ``` Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s ----------------- | ------------- | ---------------- | ------------ | ------------ None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41 500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65 500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52 1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57 1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94 5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85 5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55 10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36 10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82 25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93 25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81 50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49 50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32 ``` After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493 Differential Revision: D10842844 Pulled By: abhimadan fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
2018-10-26 02:25:00 +00:00
std::vector<RangeTombstone> expected_tombstones = {
{"1pika", "2chu", 0},
{"2chu", "c", 1},
{"2chu", "c", 0},
{"c", "p", 0},
};
for (int i = 0; i < 2; i++) {
RangeTombstone t(keys[i], vals[i], i);
std::pair<InternalKey, Slice> p = t.Serialize();
c.Add(p.first.Encode().ToString(), p.second);
}
std::vector<std::string> sorted_keys;
stl_wrappers::KVMap kvmap;
Options options;
options.compression = kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_restart_interval = 1;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
std::unique_ptr<InternalKeyComparator> internal_cmp(
new InternalKeyComparator(options.comparator));
c.Finish(options, ioptions, moptions, table_options, *internal_cmp,
&sorted_keys, &kvmap);
for (int j = 0; j < 2; ++j) {
std::unique_ptr<InternalIterator> iter(
c.GetTableReader()->NewRangeTombstoneIterator(ReadOptions()));
if (j > 0) {
// For second iteration, delete the table reader object and verify the
// iterator can still access its metablock's range tombstones.
c.ResetTableReader();
}
ASSERT_FALSE(iter->Valid());
iter->SeekToFirst();
ASSERT_TRUE(iter->Valid());
Cache fragmented range tombstones in BlockBasedTableReader (#4493) Summary: This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses. On the same DB used in #4449, running `readrandom` results in the following: ``` readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found) ``` Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results): ``` Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s ----------------- | ------------- | ---------------- | ------------ | ------------ None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41 500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65 500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52 1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57 1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94 5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85 5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55 10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36 10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82 25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93 25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81 50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49 50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32 ``` After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493 Differential Revision: D10842844 Pulled By: abhimadan fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
2018-10-26 02:25:00 +00:00
for (size_t i = 0; i < expected_tombstones.size(); i++) {
ASSERT_TRUE(iter->Valid());
ParsedInternalKey parsed_key;
ASSERT_OK(
ParseInternalKey(iter->key(), &parsed_key, true /* log_err_key */));
RangeTombstone t(parsed_key, iter->value());
Cache fragmented range tombstones in BlockBasedTableReader (#4493) Summary: This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses. On the same DB used in #4449, running `readrandom` results in the following: ``` readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found) ``` Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results): ``` Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s ----------------- | ------------- | ---------------- | ------------ | ------------ None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41 500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65 500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52 1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57 1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94 5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85 5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55 10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36 10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82 25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93 25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81 50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49 50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32 ``` After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493 Differential Revision: D10842844 Pulled By: abhimadan fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
2018-10-26 02:25:00 +00:00
const auto& expected_t = expected_tombstones[i];
ASSERT_EQ(t.start_key_, expected_t.start_key_);
ASSERT_EQ(t.end_key_, expected_t.end_key_);
ASSERT_EQ(t.seq_, expected_t.seq_);
iter->Next();
}
ASSERT_TRUE(!iter->Valid());
}
}
TEST_P(BlockBasedTableTest, FilterPolicyNameProperties) {
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("a1", "val1");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
Options options;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
auto& props = *c.GetTableReader()->GetTableProperties();
ASSERT_EQ(table_options.filter_policy->Name(), props.filter_policy_name);
c.ResetTableReader();
}
//
// BlockBasedTableTest::PrefetchTest
//
void AssertKeysInCache(BlockBasedTable* table_reader,
const std::vector<std::string>& keys_in_cache,
const std::vector<std::string>& keys_not_in_cache,
bool convert = false) {
if (convert) {
for (auto key : keys_in_cache) {
InternalKey ikey(key, kMaxSequenceNumber, kTypeValue);
ASSERT_TRUE(table_reader->TEST_KeyInCache(ReadOptions(), ikey.Encode()));
}
for (auto key : keys_not_in_cache) {
InternalKey ikey(key, kMaxSequenceNumber, kTypeValue);
ASSERT_TRUE(!table_reader->TEST_KeyInCache(ReadOptions(), ikey.Encode()));
}
} else {
for (auto key : keys_in_cache) {
ASSERT_TRUE(table_reader->TEST_KeyInCache(ReadOptions(), key));
}
for (auto key : keys_not_in_cache) {
ASSERT_TRUE(!table_reader->TEST_KeyInCache(ReadOptions(), key));
}
}
}
void PrefetchRange(TableConstructor* c, Options* opt,
BlockBasedTableOptions* table_options, const char* key_begin,
const char* key_end,
const std::vector<std::string>& keys_in_cache,
const std::vector<std::string>& keys_not_in_cache,
const Status expected_status = Status::OK()) {
// reset the cache and reopen the table
table_options->block_cache = NewLRUCache(16 * 1024 * 1024, 4);
opt->table_factory.reset(NewBlockBasedTableFactory(*table_options));
const ImmutableOptions ioptions2(*opt);
const MutableCFOptions moptions(*opt);
ASSERT_OK(c->Reopen(ioptions2, moptions));
// prefetch
auto* table_reader = dynamic_cast<BlockBasedTable*>(c->GetTableReader());
Status s;
std::unique_ptr<Slice> begin, end;
std::unique_ptr<InternalKey> i_begin, i_end;
if (key_begin != nullptr) {
if (c->ConvertToInternalKey()) {
i_begin.reset(new InternalKey(key_begin, kMaxSequenceNumber, kTypeValue));
begin.reset(new Slice(i_begin->Encode()));
} else {
begin.reset(new Slice(key_begin));
}
}
if (key_end != nullptr) {
if (c->ConvertToInternalKey()) {
i_end.reset(new InternalKey(key_end, kMaxSequenceNumber, kTypeValue));
end.reset(new Slice(i_end->Encode()));
} else {
end.reset(new Slice(key_end));
}
}
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
s = table_reader->Prefetch(read_options, begin.get(), end.get());
ASSERT_TRUE(s.code() == expected_status.code());
// assert our expectation in cache warmup
AssertKeysInCache(table_reader, keys_in_cache, keys_not_in_cache,
c->ConvertToInternalKey());
c->ResetTableReader();
}
TEST_P(BlockBasedTableTest, PrefetchTest) {
// The purpose of this test is to test the prefetching operation built into
// BlockBasedTable.
Options opt;
std::unique_ptr<InternalKeyComparator> ikc;
ikc.reset(new test::PlainInternalKeyComparator(opt.comparator));
opt.compression = kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_size = 1024;
// big enough so we don't ever lose cached values.
table_options.block_cache = NewLRUCache(16 * 1024 * 1024, 4);
opt.table_factory.reset(NewBlockBasedTableFactory(table_options));
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("k01", "hello");
c.Add("k02", "hello2");
c.Add("k03", std::string(10000, 'x'));
c.Add("k04", std::string(200000, 'x'));
c.Add("k05", std::string(300000, 'x'));
c.Add("k06", "hello3");
c.Add("k07", std::string(100000, 'x'));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(opt);
const MutableCFOptions moptions(opt);
c.Finish(opt, ioptions, moptions, table_options, *ikc, &keys, &kvmap);
c.ResetTableReader();
// We get the following data spread :
//
// Data block Index
// ========================
// [ k01 k02 k03 ] k03
// [ k04 ] k04
// [ k05 ] k05
// [ k06 k07 ] k07
// Simple
PrefetchRange(&c, &opt, &table_options,
/*key_range=*/"k01", "k05",
/*keys_in_cache=*/{"k01", "k02", "k03", "k04", "k05"},
/*keys_not_in_cache=*/{"k06", "k07"});
PrefetchRange(&c, &opt, &table_options, "k01", "k01", {"k01", "k02", "k03"},
{"k04", "k05", "k06", "k07"});
// odd
PrefetchRange(&c, &opt, &table_options, "a", "z",
{"k01", "k02", "k03", "k04", "k05", "k06", "k07"}, {});
PrefetchRange(&c, &opt, &table_options, "k00", "k00", {"k01", "k02", "k03"},
{"k04", "k05", "k06", "k07"});
// Edge cases
PrefetchRange(&c, &opt, &table_options, "k00", "k06",
{"k01", "k02", "k03", "k04", "k05", "k06", "k07"}, {});
PrefetchRange(&c, &opt, &table_options, "k00", "zzz",
{"k01", "k02", "k03", "k04", "k05", "k06", "k07"}, {});
// null keys
PrefetchRange(&c, &opt, &table_options, nullptr, nullptr,
{"k01", "k02", "k03", "k04", "k05", "k06", "k07"}, {});
PrefetchRange(&c, &opt, &table_options, "k04", nullptr,
{"k04", "k05", "k06", "k07"}, {"k01", "k02", "k03"});
PrefetchRange(&c, &opt, &table_options, nullptr, "k05",
{"k01", "k02", "k03", "k04", "k05"}, {"k06", "k07"});
// invalid
PrefetchRange(&c, &opt, &table_options, "k06", "k00", {}, {},
Status::InvalidArgument(Slice("k06 "), Slice("k07")));
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, TotalOrderSeekOnHashIndex) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
for (int i = 0; i <= 4; ++i) {
Options options;
// Make each key/value an individual block
table_options.block_size = 64;
switch (i) {
case 0:
// Binary search index
table_options.index_type = BlockBasedTableOptions::kBinarySearch;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
break;
case 1:
// Hash search index
table_options.index_type = BlockBasedTableOptions::kHashSearch;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
options.prefix_extractor.reset(NewFixedPrefixTransform(4));
break;
case 2:
// Hash search index with filter policy
table_options.index_type = BlockBasedTableOptions::kHashSearch;
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
options.prefix_extractor.reset(NewFixedPrefixTransform(4));
break;
case 3:
// Two-level index
table_options.index_type = BlockBasedTableOptions::kTwoLevelIndexSearch;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
break;
case 4:
// Binary search with first key
table_options.index_type =
BlockBasedTableOptions::kBinarySearchWithFirstKey;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
break;
}
TableConstructor c(BytewiseComparator(),
true /* convert_to_internal_key_ */);
c.Add("aaaa1", std::string('a', 56));
c.Add("bbaa1", std::string('a', 56));
c.Add("cccc1", std::string('a', 56));
c.Add("bbbb1", std::string('a', 56));
c.Add("baaa1", std::string('a', 56));
c.Add("abbb1", std::string('a', 56));
c.Add("cccc2", std::string('a', 56));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
auto props = c.GetTableReader()->GetTableProperties();
ASSERT_EQ(7u, props->num_data_blocks);
auto* reader = c.GetTableReader();
ReadOptions ro;
ro.total_order_seek = true;
std::unique_ptr<InternalIterator> iter(reader->NewIterator(
ro, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
iter->Seek(InternalKey("b", 0, kTypeValue).Encode());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("baaa1", ExtractUserKey(iter->key()).ToString());
iter->Next();
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("bbaa1", ExtractUserKey(iter->key()).ToString());
iter->Seek(InternalKey("bb", 0, kTypeValue).Encode());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("bbaa1", ExtractUserKey(iter->key()).ToString());
iter->Next();
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("bbbb1", ExtractUserKey(iter->key()).ToString());
iter->Seek(InternalKey("bbb", 0, kTypeValue).Encode());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("bbbb1", ExtractUserKey(iter->key()).ToString());
iter->Next();
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("cccc1", ExtractUserKey(iter->key()).ToString());
}
}
TEST_P(BlockBasedTableTest, NoopTransformSeek) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
Options options;
options.comparator = BytewiseComparator();
options.table_factory.reset(new BlockBasedTableFactory(table_options));
options.prefix_extractor.reset(NewNoopTransform());
TableConstructor c(options.comparator);
// To tickle the PrefixMayMatch bug it is important that the
// user-key is a single byte so that the index key exactly matches
// the user-key.
InternalKey key("a", 1, kTypeValue);
c.Add(key.Encode().ToString(), "b");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
const InternalKeyComparator internal_comparator(options.comparator);
c.Finish(options, ioptions, moptions, table_options, internal_comparator,
&keys, &kvmap);
auto* reader = c.GetTableReader();
for (int i = 0; i < 2; ++i) {
ReadOptions ro;
ro.total_order_seek = (i == 0);
std::unique_ptr<InternalIterator> iter(reader->NewIterator(
ro, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
iter->Seek(key.Encode());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("a", ExtractUserKey(iter->key()).ToString());
}
}
TEST_P(BlockBasedTableTest, SkipPrefixBloomFilter) {
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
// if DB is opened with a prefix extractor of a different name,
// prefix bloom is skipped when read the file
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
table_options.filter_policy.reset(NewBloomFilterPolicy(2));
table_options.whole_key_filtering = false;
Options options;
options.comparator = BytewiseComparator();
options.table_factory.reset(new BlockBasedTableFactory(table_options));
options.prefix_extractor.reset(NewFixedPrefixTransform(1));
TableConstructor c(options.comparator);
InternalKey key("abcdefghijk", 1, kTypeValue);
c.Add(key.Encode().ToString(), "test");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
const InternalKeyComparator internal_comparator(options.comparator);
c.Finish(options, ioptions, moptions, table_options, internal_comparator,
&keys, &kvmap);
// TODO(Zhongyi): update test to use MutableCFOptions
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
options.prefix_extractor.reset(NewFixedPrefixTransform(9));
const ImmutableOptions new_ioptions(options);
const MutableCFOptions new_moptions(options);
ASSERT_OK(c.Reopen(new_ioptions, new_moptions));
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
auto reader = c.GetTableReader();
ReadOptions read_options;
std::unique_ptr<InternalIterator> db_iter(reader->NewIterator(
read_options, new_moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
store prefix_extractor_name in table Summary: Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file. Also add unit tests for that. Test Plan: before change: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter table/table_test.cc:1421: Failure Value of: db_iter->Valid() Actual: false Expected: true [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms) [----------] 1 test from BlockBasedTableTest (1 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (1 ms total) [ PASSED ] 0 tests. [ FAILED ] 1 test, listed below: [ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter 1 FAILED TEST ``` after: ``` Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from BlockBasedTableTest [ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter [ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms) [----------] 1 test from BlockBasedTableTest (0 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (0 ms total) [ PASSED ] 1 test. ``` Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D61215
2016-08-26 18:46:32 +00:00
// Test point lookup
// only one kv
for (auto& kv : kvmap) {
db_iter->Seek(kv.first);
ASSERT_TRUE(db_iter->Valid());
ASSERT_OK(db_iter->status());
ASSERT_EQ(db_iter->key(), kv.first);
ASSERT_EQ(db_iter->value(), kv.second);
}
}
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
TEST_P(BlockBasedTableTest, BadChecksumType) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
Options options;
options.comparator = BytewiseComparator();
options.table_factory.reset(new BlockBasedTableFactory(table_options));
TableConstructor c(options.comparator);
InternalKey key("abc", 1, kTypeValue);
c.Add(key.Encode().ToString(), "test");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
const InternalKeyComparator internal_comparator(options.comparator);
c.Finish(options, ioptions, moptions, table_options, internal_comparator,
&keys, &kvmap);
// Corrupt checksum type (123 is invalid)
auto& sink = *c.TEST_GetSink();
size_t len = sink.contents_.size();
ASSERT_EQ(sink.contents_[len - Footer::kNewVersionsEncodedLength],
table_options.checksum);
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
sink.contents_[len - Footer::kNewVersionsEncodedLength] = char{123};
// (Re-)Open table file with bad checksum type
const ImmutableOptions new_ioptions(options);
const MutableCFOptions new_moptions(options);
Status s = c.Reopen(new_ioptions, new_moptions);
ASSERT_NOK(s);
// "test" is file name
ASSERT_EQ(s.ToString(),
"Corruption: Corrupt or unsupported checksum type: 123 in test");
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
}
class BuiltinChecksumTest : public testing::Test,
public testing::WithParamInterface<ChecksumType> {};
INSTANTIATE_TEST_CASE_P(SupportedChecksums, BuiltinChecksumTest,
testing::ValuesIn(GetSupportedChecksums()));
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
namespace {
std::string ChecksumAsString(const std::string& data,
ChecksumType checksum_type) {
uint32_t v = ComputeBuiltinChecksum(checksum_type, data.data(), data.size());
// Verify consistency with other function
if (data.size() >= 1) {
EXPECT_EQ(v, ComputeBuiltinChecksumWithLastByte(
checksum_type, data.data(), data.size() - 1, data.back()));
}
// Little endian as in file
std::array<char, 4> raw_bytes;
EncodeFixed32(raw_bytes.data(), v);
return Slice(raw_bytes.data(), raw_bytes.size()).ToString(/*hex*/ true);
}
std::string ChecksumAsString(std::string* data, char new_last_byte,
ChecksumType checksum_type) {
data->back() = new_last_byte;
return ChecksumAsString(*data, checksum_type);
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
}
} // namespace
// Make sure that checksum values don't change in later versions, even if
// consistent within current version.
TEST_P(BuiltinChecksumTest, ChecksumSchemas) {
// Trailing 'x' chars will be replaced by compression type. Specifically,
// the first byte of a block trailer is compression type, which is part of
// the checksum input. This test does not deal with storing or parsing
// checksums from the trailer (next 4 bytes of trailer).
std::string b0 = "x";
std::string b1 = "This is a short block!x";
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
std::string b2;
for (int i = 0; i < 100; ++i) {
b2.append("This is a long block!");
}
b2.append("x");
std::string empty;
char ct1 = kNoCompression;
char ct2 = kSnappyCompression;
char ct3 = kZSTD;
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
ChecksumType t = GetParam();
switch (t) {
case kNoChecksum:
EXPECT_EQ(ChecksumAsString(empty, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b0, ct1, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b0, ct2, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b0, ct3, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b1, ct1, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b1, ct2, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b1, ct3, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b2, ct1, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b2, ct2, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b2, ct3, t), "00000000");
break;
case kCRC32c:
EXPECT_EQ(ChecksumAsString(empty, t), "D8EA82A2");
EXPECT_EQ(ChecksumAsString(&b0, ct1, t), "D28F2549");
EXPECT_EQ(ChecksumAsString(&b0, ct2, t), "052B2843");
EXPECT_EQ(ChecksumAsString(&b0, ct3, t), "46F8F711");
EXPECT_EQ(ChecksumAsString(&b1, ct1, t), "583F0355");
EXPECT_EQ(ChecksumAsString(&b1, ct2, t), "2F9B0A57");
EXPECT_EQ(ChecksumAsString(&b1, ct3, t), "ECE7DA1D");
EXPECT_EQ(ChecksumAsString(&b2, ct1, t), "943EF0AB");
EXPECT_EQ(ChecksumAsString(&b2, ct2, t), "43A2EDB1");
EXPECT_EQ(ChecksumAsString(&b2, ct3, t), "00E53D63");
break;
case kxxHash:
EXPECT_EQ(ChecksumAsString(empty, t), "055DCC02");
EXPECT_EQ(ChecksumAsString(&b0, ct1, t), "3EB065CF");
EXPECT_EQ(ChecksumAsString(&b0, ct2, t), "31F79238");
EXPECT_EQ(ChecksumAsString(&b0, ct3, t), "320D2E00");
EXPECT_EQ(ChecksumAsString(&b1, ct1, t), "4A2E5FB0");
EXPECT_EQ(ChecksumAsString(&b1, ct2, t), "0BD9F652");
EXPECT_EQ(ChecksumAsString(&b1, ct3, t), "B4107E50");
EXPECT_EQ(ChecksumAsString(&b2, ct1, t), "20F4D4BA");
EXPECT_EQ(ChecksumAsString(&b2, ct2, t), "8F1A1F99");
EXPECT_EQ(ChecksumAsString(&b2, ct3, t), "A191A338");
break;
case kxxHash64:
EXPECT_EQ(ChecksumAsString(empty, t), "99E9D851");
EXPECT_EQ(ChecksumAsString(&b0, ct1, t), "682705DB");
EXPECT_EQ(ChecksumAsString(&b0, ct2, t), "30E7211B");
EXPECT_EQ(ChecksumAsString(&b0, ct3, t), "B7BB58E8");
EXPECT_EQ(ChecksumAsString(&b1, ct1, t), "B74655EF");
EXPECT_EQ(ChecksumAsString(&b1, ct2, t), "B6C8BBBE");
EXPECT_EQ(ChecksumAsString(&b1, ct3, t), "AED9E3B4");
EXPECT_EQ(ChecksumAsString(&b2, ct1, t), "0D4999FE");
EXPECT_EQ(ChecksumAsString(&b2, ct2, t), "F5932423");
EXPECT_EQ(ChecksumAsString(&b2, ct3, t), "6B31BAB1");
break;
case kXXH3:
EXPECT_EQ(ChecksumAsString(empty, t), "00000000");
EXPECT_EQ(ChecksumAsString(&b0, ct1, t), "C294D338");
EXPECT_EQ(ChecksumAsString(&b0, ct2, t), "1B174353");
EXPECT_EQ(ChecksumAsString(&b0, ct3, t), "2D0E20C8");
EXPECT_EQ(ChecksumAsString(&b1, ct1, t), "B37FB5E6");
EXPECT_EQ(ChecksumAsString(&b1, ct2, t), "6AFC258D");
EXPECT_EQ(ChecksumAsString(&b1, ct3, t), "5CE54616");
EXPECT_EQ(ChecksumAsString(&b2, ct1, t), "FA2D482E");
EXPECT_EQ(ChecksumAsString(&b2, ct2, t), "23AED845");
EXPECT_EQ(ChecksumAsString(&b2, ct3, t), "15B7BBDE");
break;
default:
// Force this test to be updated on new ChecksumTypes
assert(false);
break;
}
}
TEST_P(BuiltinChecksumTest, ChecksumZeroInputs) {
// Verify that no reasonably sized "all zeros" inputs produce "all zeros"
// output. Otherwise, "wiped" data could appear to be well-formed.
// Assuming essentially random assignment of output values, the likelihood
// of encountering checksum == 0 for an input not specifically crafted is
// 1 in 4 billion.
if (GetParam() == kNoChecksum) {
return;
}
// "Thorough" case is too slow for continouous testing
bool thorough = getenv("ROCKSDB_THOROUGH_CHECKSUM_TEST") != nullptr;
// Verified through 10M
size_t kMaxZerosLen = thorough ? 10000000 : 20000;
std::string zeros(kMaxZerosLen, '\0');
for (size_t len = 0; len < kMaxZerosLen; ++len) {
if (thorough && (len & 0xffffU) == 0) {
fprintf(stderr, "t=%u len=%u\n", (unsigned)GetParam(), (unsigned)len);
}
uint32_t v = ComputeBuiltinChecksum(GetParam(), zeros.data(), len);
if (v == 0U) {
// One exception case:
if (GetParam() == kXXH3 && len == 0) {
// This is not a big deal because assuming the block length is known
// from the block handle, which comes from a checksum-verified block,
// there is nothing to corrupt in a zero-length block. And when there
// is a block trailer with compression byte (as in block-based table),
// zero length checksummed data never arises.
continue;
}
// Only compute this on failure
SCOPED_TRACE("len=" + std::to_string(len));
ASSERT_NE(v, 0U);
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
}
}
}
void AddInternalKey(TableConstructor* c, const std::string& prefix,
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
std::string value = "v", int /*suffix_len*/ = 800) {
static Random rnd(1023);
InternalKey k(prefix + rnd.RandomString(800), 0, kTypeValue);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
c->Add(k.Encode().ToString(), value);
}
void TableTest::IndexTest(BlockBasedTableOptions table_options) {
TableConstructor c(BytewiseComparator());
// keys with prefix length 3, make sure the key/value is big enough to fill
// one block
AddInternalKey(&c, "0015");
AddInternalKey(&c, "0035");
AddInternalKey(&c, "0054");
AddInternalKey(&c, "0055");
AddInternalKey(&c, "0056");
AddInternalKey(&c, "0057");
AddInternalKey(&c, "0058");
AddInternalKey(&c, "0075");
AddInternalKey(&c, "0076");
AddInternalKey(&c, "0095");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
options.prefix_extractor.reset(NewFixedPrefixTransform(3));
table_options.block_size = 1700;
table_options.block_cache = NewLRUCache(1024, 4);
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options, *comparator, &keys,
&kvmap);
auto reader = c.GetTableReader();
auto props = reader->GetTableProperties();
ASSERT_EQ(5u, props->num_data_blocks);
// TODO(Zhongyi): update test to use MutableCFOptions
ReadOptions read_options;
std::unique_ptr<InternalIterator> index_iter(reader->NewIterator(
read_options, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
// -- Find keys do not exist, but have common prefix.
std::vector<std::string> prefixes = {"001", "003", "005", "007", "009"};
std::vector<std::string> lower_bound = {
keys[0], keys[1], keys[2], keys[7], keys[9],
};
// find the lower bound of the prefix
for (size_t i = 0; i < prefixes.size(); ++i) {
index_iter->Seek(InternalKey(prefixes[i], 0, kTypeValue).Encode());
ASSERT_OK(index_iter->status());
ASSERT_TRUE(index_iter->Valid());
// seek the first element in the block
ASSERT_EQ(lower_bound[i], index_iter->key().ToString());
ASSERT_EQ("v", index_iter->value().ToString());
}
// find the upper bound of prefixes
std::vector<std::string> upper_bound = {
keys[1],
keys[2],
keys[7],
keys[9],
};
// find existing keys
for (const auto& item : kvmap) {
auto ukey = ExtractUserKey(item.first).ToString();
index_iter->Seek(ukey);
// ASSERT_OK(regular_iter->status());
ASSERT_OK(index_iter->status());
// ASSERT_TRUE(regular_iter->Valid());
ASSERT_TRUE(index_iter->Valid());
ASSERT_EQ(item.first, index_iter->key().ToString());
ASSERT_EQ(item.second, index_iter->value().ToString());
}
for (size_t i = 0; i < prefixes.size(); ++i) {
// the key is greater than any existing keys.
auto key = prefixes[i] + "9";
index_iter->Seek(InternalKey(key, 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter->status().ok() || index_iter->status().IsNotFound());
ASSERT_TRUE(!index_iter->status().IsNotFound() || !index_iter->Valid());
if (i == prefixes.size() - 1) {
// last key
ASSERT_TRUE(!index_iter->Valid());
} else {
ASSERT_TRUE(index_iter->Valid());
// seek the first element in the block
ASSERT_EQ(upper_bound[i], index_iter->key().ToString());
ASSERT_EQ("v", index_iter->value().ToString());
}
}
// find keys with prefix that don't match any of the existing prefixes.
std::vector<std::string> non_exist_prefixes = {"002", "004", "006", "008"};
for (const auto& prefix : non_exist_prefixes) {
index_iter->Seek(InternalKey(prefix, 0, kTypeValue).Encode());
// regular_iter->Seek(prefix);
ASSERT_OK(index_iter->status());
// Seek to non-existing prefixes should yield either invalid, or a
// key with prefix greater than the target.
if (index_iter->Valid()) {
Slice ukey = ExtractUserKey(index_iter->key());
Slice ukey_prefix = options.prefix_extractor->Transform(ukey);
ASSERT_TRUE(BytewiseComparator()->Compare(prefix, ukey_prefix) < 0);
}
}
for (const auto& prefix : non_exist_prefixes) {
index_iter->SeekForPrev(InternalKey(prefix, 0, kTypeValue).Encode());
// regular_iter->Seek(prefix);
ASSERT_OK(index_iter->status());
// Seek to non-existing prefixes should yield either invalid, or a
// key with prefix greater than the target.
if (index_iter->Valid()) {
Slice ukey = ExtractUserKey(index_iter->key());
Slice ukey_prefix = options.prefix_extractor->Transform(ukey);
ASSERT_TRUE(BytewiseComparator()->Compare(prefix, ukey_prefix) > 0);
}
}
{
// Test reseek case. It should impact partitioned index more.
ReadOptions ro;
ro.total_order_seek = true;
std::unique_ptr<InternalIterator> index_iter2(reader->NewIterator(
ro, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
// Things to cover in partitioned index:
// 1. Both of Seek() and SeekToLast() has optimization to prevent
// rereek leaf index block if it remains to the same one, and
// they reuse the same variable.
// 2. When Next() or Prev() is called, the block moves, so the
// optimization should kick in only with the current one.
index_iter2->Seek(InternalKey("0055", 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0055", index_iter2->key().ToString().substr(0, 4));
index_iter2->SeekToLast();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->Seek(InternalKey("0055", 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0055", index_iter2->key().ToString().substr(0, 4));
index_iter2->SeekToLast();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0075", index_iter2->key().ToString().substr(0, 4));
index_iter2->Seek(InternalKey("0095", 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0075", index_iter2->key().ToString().substr(0, 4));
index_iter2->SeekToLast();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->Seek(InternalKey("0095", 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
index_iter2->Prev();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0075", index_iter2->key().ToString().substr(0, 4));
index_iter2->Seek(InternalKey("0075", 0, kTypeValue).Encode());
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0075", index_iter2->key().ToString().substr(0, 4));
index_iter2->Next();
ASSERT_TRUE(index_iter2->Valid());
index_iter2->Next();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
index_iter2->SeekToLast();
ASSERT_TRUE(index_iter2->Valid());
ASSERT_EQ("0095", index_iter2->key().ToString().substr(0, 4));
}
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, BinaryIndexTest) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kBinarySearch;
IndexTest(table_options);
}
TEST_P(BlockBasedTableTest, HashIndexTest) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kHashSearch;
IndexTest(table_options);
}
TEST_P(BlockBasedTableTest, PartitionIndexTest) {
const int max_index_keys = 5;
const int est_max_index_key_value_size = 32;
const int est_max_index_size = max_index_keys * est_max_index_key_value_size;
for (int i = 1; i <= est_max_index_size + 1; i++) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kTwoLevelIndexSearch;
table_options.metadata_block_size = i;
IndexTest(table_options);
}
}
TEST_P(BlockBasedTableTest, IndexSeekOptimizationIncomplete) {
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
Options options;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
TableConstructor c(BytewiseComparator());
AddInternalKey(&c, "pika");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
c.Finish(options, ioptions, moptions, table_options, *comparator, &keys,
&kvmap);
ASSERT_EQ(1, keys.size());
auto reader = c.GetTableReader();
ReadOptions ropt;
ropt.read_tier = ReadTier::kBlockCacheTier;
std::unique_ptr<InternalIterator> iter(reader->NewIterator(
ropt, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
auto ikey = [](Slice user_key) {
return InternalKey(user_key, 0, kTypeValue).Encode().ToString();
};
iter->Seek(ikey("pika"));
ASSERT_FALSE(iter->Valid());
ASSERT_TRUE(iter->status().IsIncomplete());
// This used to crash at some point.
iter->Seek(ikey("pika"));
ASSERT_FALSE(iter->Valid());
ASSERT_TRUE(iter->status().IsIncomplete());
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
TEST_P(BlockBasedTableTest, BinaryIndexWithFirstKey1) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kBinarySearchWithFirstKey;
IndexTest(table_options);
}
class CustomFlushBlockPolicy : public FlushBlockPolicyFactory,
public FlushBlockPolicy {
public:
explicit CustomFlushBlockPolicy(std::vector<int> keys_per_block)
: keys_per_block_(keys_per_block) {}
const char* Name() const override { return "CustomFlushBlockPolicy"; }
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
FlushBlockPolicy* NewFlushBlockPolicy(const BlockBasedTableOptions&,
const BlockBuilder&) const override {
return new CustomFlushBlockPolicy(keys_per_block_);
}
bool Update(const Slice&, const Slice&) override {
if (keys_in_current_block_ >= keys_per_block_.at(current_block_idx_)) {
++current_block_idx_;
keys_in_current_block_ = 1;
return true;
}
++keys_in_current_block_;
return false;
}
std::vector<int> keys_per_block_;
int current_block_idx_ = 0;
int keys_in_current_block_ = 0;
};
TEST_P(BlockBasedTableTest, BinaryIndexWithFirstKey2) {
for (int use_first_key = 0; use_first_key < 2; ++use_first_key) {
SCOPED_TRACE("use_first_key = " + std::to_string(use_first_key));
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type =
use_first_key ? BlockBasedTableOptions::kBinarySearchWithFirstKey
: BlockBasedTableOptions::kBinarySearch;
table_options.block_cache = NewLRUCache(10000); // fits all blocks
table_options.index_shortening =
BlockBasedTableOptions::IndexShorteningMode::kNoShortening;
table_options.flush_block_policy_factory =
std::make_shared<CustomFlushBlockPolicy>(std::vector<int>{2, 1, 3, 2});
Options options;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
options.statistics = CreateDBStatistics();
Statistics* stats = options.statistics.get();
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
const ImmutableOptions ioptions(options);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
const MutableCFOptions moptions(options);
TableConstructor c(BytewiseComparator());
// Block 0.
AddInternalKey(&c, "aaaa", "v0");
AddInternalKey(&c, "aaac", "v1");
// Block 1.
AddInternalKey(&c, "aaca", "v2");
// Block 2.
AddInternalKey(&c, "caaa", "v3");
AddInternalKey(&c, "caac", "v4");
AddInternalKey(&c, "caae", "v5");
// Block 3.
AddInternalKey(&c, "ccaa", "v6");
AddInternalKey(&c, "ccac", "v7");
// Write the file.
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
c.Finish(options, ioptions, moptions, table_options, *comparator, &keys,
&kvmap);
ASSERT_EQ(8, keys.size());
auto reader = c.GetTableReader();
auto props = reader->GetTableProperties();
ASSERT_EQ(4u, props->num_data_blocks);
ReadOptions read_options;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
std::unique_ptr<InternalIterator> iter(reader->NewIterator(
read_options, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
/*skip_filters=*/false, TableReaderCaller::kUncategorized,
/*compaction_readahead_size=*/0, /*allow_unprepared_value=*/true));
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
// Shouldn't have read data blocks before iterator is seeked.
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
auto ikey = [](Slice user_key) {
return InternalKey(user_key, 0, kTypeValue).Encode().ToString();
};
// Seek to a key between blocks. If index contains first key, we shouldn't
// read any data blocks until value is requested.
iter->Seek(ikey("aaba"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[2], iter->key().ToString());
EXPECT_EQ(use_first_key ? 0 : 1,
stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v2", iter->value().ToString());
EXPECT_EQ(1, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Seek to the middle of a block. The block should be read right away.
iter->Seek(ikey("caab"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[4], iter->key().ToString());
EXPECT_EQ(2, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v4", iter->value().ToString());
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Seek to just before the same block and don't access value.
// The iterator should keep pinning the block contents.
iter->Seek(ikey("baaa"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[3], iter->key().ToString());
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Seek to the same block again to check that the block is still pinned.
iter->Seek(ikey("caae"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[5], iter->key().ToString());
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v5", iter->value().ToString());
EXPECT_EQ(2, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Step forward and fall through to the next block. Don't access value.
iter->Next();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[6], iter->key().ToString());
EXPECT_EQ(use_first_key ? 2 : 3,
stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Step forward again. Block should be read.
iter->Next();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[7], iter->key().ToString());
EXPECT_EQ(3, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v7", iter->value().ToString());
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Step forward and reach the end.
iter->Next();
EXPECT_FALSE(iter->Valid());
EXPECT_EQ(3, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Seek to a single-key block and step forward without accessing value.
iter->Seek(ikey("aaca"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[2], iter->key().ToString());
EXPECT_EQ(use_first_key ? 0 : 1,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
iter->Next();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[3], iter->key().ToString());
EXPECT_EQ(use_first_key ? 1 : 2,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v3", iter->value().ToString());
EXPECT_EQ(2, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
EXPECT_EQ(3, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
// Seek between blocks and step back without accessing value.
iter->Seek(ikey("aaca"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[2], iter->key().ToString());
EXPECT_EQ(use_first_key ? 2 : 3,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
EXPECT_EQ(3, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
iter->Prev();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[1], iter->key().ToString());
EXPECT_EQ(use_first_key ? 2 : 3,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// All blocks are in cache now, there'll be no more misses ever.
EXPECT_EQ(4, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v1", iter->value().ToString());
// Next into the next block again.
iter->Next();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[2], iter->key().ToString());
EXPECT_EQ(use_first_key ? 2 : 4,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Seek to first and step back without accessing value.
iter->SeekToFirst();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[0], iter->key().ToString());
EXPECT_EQ(use_first_key ? 2 : 5,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
iter->Prev();
EXPECT_FALSE(iter->Valid());
EXPECT_EQ(use_first_key ? 2 : 5,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
// Do some SeekForPrev() and SeekToLast() just to cover all methods.
iter->SeekForPrev(ikey("caad"));
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[4], iter->key().ToString());
EXPECT_EQ(use_first_key ? 3 : 6,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v4", iter->value().ToString());
EXPECT_EQ(use_first_key ? 3 : 6,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
iter->SeekToLast();
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(keys[7], iter->key().ToString());
EXPECT_EQ(use_first_key ? 4 : 7,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("v7", iter->value().ToString());
EXPECT_EQ(use_first_key ? 4 : 7,
stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
EXPECT_EQ(4, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
c.ResetTableReader();
}
}
TEST_P(BlockBasedTableTest, BinaryIndexWithFirstKeyGlobalSeqno) {
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kBinarySearchWithFirstKey;
table_options.block_cache = NewLRUCache(10000);
Options options;
options.statistics = CreateDBStatistics();
Statistics* stats = options.statistics.get();
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
const ImmutableOptions ioptions(options);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
const MutableCFOptions moptions(options);
TableConstructor c(BytewiseComparator(), /* convert_to_internal_key */ false,
/* level */ -1, /* largest_seqno */ 42);
c.Add(InternalKey("b", 0, kTypeValue).Encode().ToString(), "x");
c.Add(InternalKey("c", 0, kTypeValue).Encode().ToString(), "y");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
c.Finish(options, ioptions, moptions, table_options, *comparator, &keys,
&kvmap);
ASSERT_EQ(2, keys.size());
auto reader = c.GetTableReader();
auto props = reader->GetTableProperties();
ASSERT_EQ(1u, props->num_data_blocks);
ReadOptions read_options;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
std::unique_ptr<InternalIterator> iter(reader->NewIterator(
read_options, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
/*skip_filters=*/false, TableReaderCaller::kUncategorized,
/*compaction_readahead_size=*/0, /*allow_unprepared_value=*/true));
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
iter->Seek(InternalKey("a", 0, kTypeValue).Encode().ToString());
ASSERT_TRUE(iter->Valid());
EXPECT_EQ(InternalKey("b", 42, kTypeValue).Encode().ToString(),
iter->key().ToString());
EXPECT_NE(keys[0], iter->key().ToString());
// Key should have been served from index, without reading data blocks.
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621) Summary: Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype. Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling. It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas. Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621 Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats. Reviewed By: siying Differential Revision: D20786930 Pulled By: al13n321 fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-16 00:37:23 +00:00
ASSERT_TRUE(iter->PrepareValue());
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
EXPECT_EQ("x", iter->value().ToString());
EXPECT_EQ(1, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
EXPECT_EQ(InternalKey("b", 42, kTypeValue).Encode().ToString(),
iter->key().ToString());
c.ResetTableReader();
}
// It's very hard to figure out the index block size of a block accurately.
// To make sure we get the index size, we just make sure as key number
// grows, the filter block size also grows.
TEST_P(BlockBasedTableTest, IndexSizeStat) {
uint64_t last_index_size = 0;
// we need to use random keys since the pure human readable texts
// may be well compressed, resulting insignifcant change of index
// block size.
Random rnd(test::RandomSeed());
std::vector<std::string> keys;
for (int i = 0; i < 100; ++i) {
keys.push_back(rnd.RandomString(10000));
}
// Each time we load one more key to the table. the table index block
// size is expected to be larger than last time's.
for (size_t i = 1; i < keys.size(); ++i) {
TableConstructor c(BytewiseComparator(),
true /* convert_to_internal_key_ */);
for (size_t j = 0; j < i; ++j) {
c.Add(keys[j], "val");
}
std::vector<std::string> ks;
stl_wrappers::KVMap kvmap;
Options options;
options.compression = kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_restart_interval = 1;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &ks, &kvmap);
auto index_size = c.GetTableReader()->GetTableProperties()->index_size;
ASSERT_GT(index_size, last_index_size);
last_index_size = index_size;
c.ResetTableReader();
}
}
TEST_P(BlockBasedTableTest, NumBlockStat) {
Random rnd(test::RandomSeed());
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
Options options;
options.compression = kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_restart_interval = 1;
table_options.block_size = 1000;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
for (int i = 0; i < 10; ++i) {
// the key/val are slightly smaller than block size, so that each block
// holds roughly one key/value pair.
c.Add(rnd.RandomString(900), "val");
}
std::vector<std::string> ks;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &ks, &kvmap);
ASSERT_EQ(kvmap.size(),
c.GetTableReader()->GetTableProperties()->num_data_blocks);
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, TracingGetTest) {
TableConstructor c(BytewiseComparator());
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.create_if_missing = true;
table_options.block_cache = NewLRUCache(1024 * 1024, 0);
table_options.cache_index_and_filter_blocks = true;
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
SetupTracingTest(&c);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
InternalKey internal_key(auto_add_key1, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
for (uint32_t i = 1; i <= 2; i++) {
PinnableSlice value;
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
GetContext get_context(
options.comparator, nullptr, nullptr, nullptr, GetContext::kNotFound,
auto_add_key1, &value, nullptr, nullptr, nullptr, true, nullptr,
nullptr, nullptr, nullptr, nullptr, nullptr, /*tracing_get_id=*/i);
get_perf_context()->Reset();
ASSERT_OK(c.GetTableReader()->Get(ReadOptions(), encoded_key, &get_context,
moptions.prefix_extractor.get()));
ASSERT_EQ(get_context.State(), GetContext::kFound);
ASSERT_EQ(value.ToString(), kDummyValue);
}
// Verify traces.
std::vector<BlockCacheTraceRecord> expected_records;
// The first two records should be prefetching index and filter blocks.
BlockCacheTraceRecord record;
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kPrefetch;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = false;
record.no_insert = false;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceFilterBlock;
expected_records.push_back(record);
// Then we should have three records for one index, one filter, and one data
// block access.
record.get_id = 1;
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
record.block_type = TraceType::kBlockTraceFilterBlock;
record.caller = TableReaderCaller::kUserGet;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.get_from_user_specified_snapshot = false;
record.referenced_key = encoded_key;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.referenced_key_exist_in_block = true;
record.is_cache_hit = true;
expected_records.push_back(record);
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
record.block_type = TraceType::kBlockTraceIndexBlock;
expected_records.push_back(record);
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = false;
record.block_type = TraceType::kBlockTraceDataBlock;
expected_records.push_back(record);
// The second get should all observe cache hits.
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = true;
record.get_id = 2;
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
record.block_type = TraceType::kBlockTraceFilterBlock;
record.caller = TableReaderCaller::kUserGet;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.get_from_user_specified_snapshot = false;
record.referenced_key = encoded_key;
expected_records.push_back(record);
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
record.block_type = TraceType::kBlockTraceIndexBlock;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceDataBlock;
expected_records.push_back(record);
VerifyBlockAccessTrace(&c, expected_records);
c.ResetTableReader();
}
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
struct HitMissCountingCache : public CacheWrapper {
using CacheWrapper::CacheWrapper;
const char* Name() const override { return "HitMissCountingCache"; }
uint64_t hit_count_ = 0;
uint64_t miss_count_ = 0;
void Reset() {
hit_count_ = 0;
miss_count_ = 0;
}
Handle* Lookup(const Slice& key, const CacheItemHelper* helper,
CreateContext* create_context,
Priority priority = Priority::LOW,
Statistics* stats = nullptr) override {
// ASSUMES no blocking async lookups
Handle* h = target_->Lookup(key, helper, create_context, priority, stats);
if (h) {
hit_count_++;
} else {
miss_count_++;
}
return h;
}
void StartAsyncLookup(AsyncLookupHandle& async_handle) override {
target_->StartAsyncLookup(async_handle);
// If not pending, caller might not call WaitAll, so have to account here.
if (!async_handle.IsPending()) {
if (async_handle.Result()) {
hit_count_++;
} else {
miss_count_++;
}
}
}
void WaitAll(AsyncLookupHandle* async_handles, size_t count) override {
// If !pending, then we already accounted for it in StartAsyncLookup.
// Assume the pending status does not change asynchronously (since
// StartAsyncLookup) and remember which still need accounting.
std::vector<AsyncLookupHandle*> needs_accounting;
for (size_t i = 0; i < count; ++i) {
if (async_handles[i].IsPending()) {
needs_accounting.push_back(async_handles + i);
}
}
target_->WaitAll(async_handles, count);
for (auto ah : needs_accounting) {
if (ah->Result()) {
hit_count_++;
} else {
miss_count_++;
}
}
}
void VerifyExpectedHitMissCounts(
const std::vector<BlockCacheTraceRecord>& expected_records) {
uint64_t expected_hits = 0;
uint64_t expected_misses = 0;
for (const auto& r : expected_records) {
if (r.is_cache_hit) {
expected_hits++;
} else {
expected_misses++;
}
}
EXPECT_EQ(expected_hits, hit_count_);
EXPECT_EQ(expected_misses, miss_count_);
Reset();
}
};
TEST_P(BlockBasedTableTest, TracingMultiGetTest) {
TableConstructor c(BytewiseComparator());
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.create_if_missing = true;
auto cache =
std::make_shared<HitMissCountingCache>(NewLRUCache(1024 * 1024, 0));
table_options.block_cache = cache;
table_options.cache_index_and_filter_blocks = true;
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
// Put auto_add_key1 and auto_add_key2 in the same data block
table_options.block_size = kDummyValue.size() * 2 + 100;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
SetupTracingTest(&c);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
std::vector<BlockCacheTraceRecord> expected_records;
for (bool first_pass : {true, false}) {
uint64_t get_id_offset = first_pass ? 2 : 5;
ReadOptions ro;
std::array<Slice, 2> ukeys{{auto_add_key1, auto_add_key2}};
std::array<PinnableSlice, 2> values;
std::vector<GetContext> get_contexts;
get_contexts.emplace_back(
options.comparator, nullptr, nullptr, nullptr, GetContext::kNotFound,
ukeys[0], &values[0], nullptr, nullptr, nullptr, true, nullptr, nullptr,
nullptr, nullptr, nullptr, nullptr, get_id_offset);
get_contexts.emplace_back(
options.comparator, nullptr, nullptr, nullptr, GetContext::kNotFound,
ukeys[1], &values[1], nullptr, nullptr, nullptr, true, nullptr, nullptr,
nullptr, nullptr, nullptr, nullptr, get_id_offset + 1);
std::array<std::string, 2> encoded_keys;
encoded_keys[0] = InternalKey(ukeys[0], 0, kTypeValue).Encode().ToString();
encoded_keys[1] = InternalKey(ukeys[1], 0, kTypeValue).Encode().ToString();
std::array<Status, 2> statuses;
autovector<KeyContext, MultiGetContext::MAX_BATCH_SIZE> key_context;
key_context.emplace_back(/*ColumnFamilyHandle omitted*/ nullptr, ukeys[0],
&values[0],
/*PinnableWideColumns omitted*/ nullptr,
/*timestamp omitted*/ nullptr, &statuses[0]);
key_context[0].ukey_without_ts = ukeys[0];
key_context[0].ikey = encoded_keys[0];
key_context[0].get_context = &get_contexts[0];
key_context.emplace_back(/*ColumnFamilyHandle omitted*/ nullptr, ukeys[1],
&values[1],
/*PinnableWideColumns omitted*/ nullptr,
/*timestamp omitted*/ nullptr, &statuses[1]);
key_context[1].ukey_without_ts = ukeys[1];
key_context[1].ikey = encoded_keys[1];
key_context[1].get_context = &get_contexts[1];
autovector<KeyContext*, MultiGetContext::MAX_BATCH_SIZE> sorted_keys;
sorted_keys.push_back(&key_context[0]);
sorted_keys.push_back(&key_context[1]);
MultiGetContext m_context(
&sorted_keys, 0, sorted_keys.size(), /*SequenceNumber*/ 42, ro,
options.env->GetFileSystem().get(), options.statistics.get());
MultiGetRange range = m_context.GetMultiGetRange();
get_perf_context()->Reset();
c.GetTableReader()->MultiGet(ro, &range, /*prefix_extractor*/ nullptr);
// Verify read op result
for (uint32_t i = 0; i <= 1; i++) {
ASSERT_OK(statuses[i]);
ASSERT_EQ(get_contexts[i].State(), GetContext::kFound);
ASSERT_EQ(values[i].ToString(), kDummyValue);
}
// Verify traces.
BlockCacheTraceRecord record;
if (first_pass) {
// The first two records should be prefetching index and filter blocks.
record.get_id = 0;
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kPrefetch;
record.is_cache_hit = false;
record.no_insert = false;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceFilterBlock;
expected_records.push_back(record);
}
// Then we should have three records for one index, one filter, and one data
// block access. (The two keys share a data block.)
record.get_id = get_id_offset;
record.block_type = TraceType::kBlockTraceFilterBlock;
record.caller = TableReaderCaller::kUserMultiGet;
record.get_from_user_specified_snapshot = false;
record.referenced_key = encoded_keys[0];
record.referenced_key_exist_in_block = true;
record.is_cache_hit = true;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceIndexBlock;
expected_records.push_back(record);
record.is_cache_hit = !first_pass;
record.block_type = TraceType::kBlockTraceDataBlock;
expected_records.push_back(record);
}
VerifyBlockAccessTrace(&c, expected_records);
cache->VerifyExpectedHitMissCounts(expected_records);
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, TracingApproximateOffsetOfTest) {
TableConstructor c(BytewiseComparator());
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.create_if_missing = true;
table_options.block_cache = NewLRUCache(1024 * 1024, 0);
table_options.cache_index_and_filter_blocks = true;
table_options.filter_policy.reset(NewBloomFilterPolicy(10, true));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
SetupTracingTest(&c);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
for (uint32_t i = 1; i <= 2; i++) {
Refactor block cache tracing w/improved MultiGet (#11339) Summary: After https://github.com/facebook/rocksdb/issues/11301, I wasn't sure whether I had regressed block cache tracing with MultiGet. Demo PR https://github.com/facebook/rocksdb/issues/11330 shows the flawed state of tracing MultiGet before my change, and based on the unit test, there was essentially no change in tracing behavior with https://github.com/facebook/rocksdb/issues/11301. This change is to leave that code and behavior better than I found it. This change is not intended to change any production behaviors except when block cache tracing is active, though might improve general read path efficiency by disabling some related tracking when such tracing is disabled. More detail on production code: * Refactoring to consolidate the construction of BlockCacheTraceRecord, and other related functionality, in block-based table reader, though it's somewhat awkward to preserve an optimization to avoid copying Slices into temporary strings in BlockCacheLookupContext. * Accurately track cache hits and misses (etc.) for each data block accessed by a MultiGet(). (Previously reported hits as misses.) * Reduced repeated checking of `block_cache_tracer_` state (by creating lookup_context only when active) for efficiency and to reduce the risk of corner case bugs where tracing is enabled or disabled for different parts of a read op. (See a TODO below) * Improved estimate calculation for num_keys_in_block (see code comment) Possible follow-up: * `XXX:` use_cache=true means double cache query? (possible double-query of block cache when allow_mmap_reads=true) * `TODO:` need more than one lookup_context here to track individual filter and index partition hits and misses * `TODO:` optimize more state checks of `block_cache_tracer_` down to `lookup_context != nullptr` * Pre-existing `XXX:` There appear to be 'break' statements above that bypass this writing of the block cache trace record * Expand test coverage (see below) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11339 Test Plan: * Added a basic unit test for block cache tracing MultiGet, for now just covering one data block with two keys. * Added HitMissCountingCache to independently verify that the actual block cache trace and expected block cache trace also agree with the actual number of cache hits / misses (nothing missing or mislabeled). For now only used with MultiGet test. * Better testing of num_keys_in_block, for now just with MultiGet * Misc improvements to table_test to improve clarity, such as making it clear that certain keys are auto-inserted at the start of every test. Performance test: Testing multireadrandom as in https://github.com/facebook/rocksdb/issues/11301, except averaging over distinct runs rather than [-X30] which doesn't seem to sufficiently reset after each run to work as an independent test run. Base with revert of 11301: 3148926 ops/sec Base: 3019146 ops/sec New: 2999529 ops/sec Possibly a tiny MultiGet CPU regression with this change. We are now always allocating an additional vector for the LookupContexts. I'm still contemplating options to try to correct the regression in https://github.com/facebook/rocksdb/issues/11301. Testing readrandom: Base with revert of 11301: 2311988 Base: 2281726 New: 2299722 Possibly a tiny Get CPU improvement with this change. We are now avoiding some unnecessary LookupContext population. Reviewed By: akankshamahajan15 Differential Revision: D44557845 Pulled By: pdillinger fbshipit-source-id: b841691799d2a48fb59cc8880dc7cbb1e107ae3d
2023-04-07 19:55:56 +00:00
InternalKey internal_key(auto_add_key1, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
c.GetTableReader()->ApproximateOffsetOf(
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
read_options, encoded_key, TableReaderCaller::kUserApproximateSize);
}
// Verify traces.
std::vector<BlockCacheTraceRecord> expected_records;
// The first two records should be prefetching index and filter blocks.
BlockCacheTraceRecord record;
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kPrefetch;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = false;
record.no_insert = false;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceFilterBlock;
expected_records.push_back(record);
// Then we should have two records for only index blocks.
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kUserApproximateSize;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = true;
expected_records.push_back(record);
expected_records.push_back(record);
VerifyBlockAccessTrace(&c, expected_records);
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, TracingIterator) {
TableConstructor c(BytewiseComparator());
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
options.create_if_missing = true;
table_options.block_cache = NewLRUCache(1024 * 1024, 0);
table_options.cache_index_and_filter_blocks = true;
table_options.filter_policy.reset(NewBloomFilterPolicy(10, true));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
SetupTracingTest(&c);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
for (uint32_t i = 1; i <= 2; i++) {
ReadOptions read_options;
std::unique_ptr<InternalIterator> iter(c.GetTableReader()->NewIterator(
read_options, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUserIterator));
iter->SeekToFirst();
while (iter->Valid()) {
iter->key();
iter->value();
iter->Next();
}
ASSERT_OK(iter->status());
iter.reset();
}
// Verify traces.
std::vector<BlockCacheTraceRecord> expected_records;
// The first two records should be prefetching index and filter blocks.
BlockCacheTraceRecord record;
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kPrefetch;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = false;
record.no_insert = false;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceFilterBlock;
expected_records.push_back(record);
// Then we should have three records for index and two data block access.
record.block_type = TraceType::kBlockTraceIndexBlock;
record.caller = TableReaderCaller::kUserIterator;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = true;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceDataBlock;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = false;
expected_records.push_back(record);
expected_records.push_back(record);
// When we iterate this file for the second time, we should observe all cache
// hits.
record.block_type = TraceType::kBlockTraceIndexBlock;
Refactor block cache tracing APIs (#10811) Summary: Refactor the classes, APIs and data structures for block cache tracing to allow a user provided trace writer to be used. Currently, only a TraceWriter is supported, with a default built-in implementation of FileTraceWriter. The TraceWriter, however, takes a flat trace record and is thus only suitable for file tracing. This PR introduces an abstract BlockCacheTraceWriter class that takes a structured BlockCacheTraceRecord. The BlockCacheTraceWriter implementation can then format and log the record in whatever way it sees fit. The default BlockCacheTraceWriterImpl does file tracing using a user provided TraceWriter. `DB::StartBlockTrace` will internally redirect to changed `BlockCacheTrace::StartBlockCacheTrace`. New API `DB::StartBlockTrace` is also added that directly takes `BlockCacheTraceWriter` pointer. This same philosophy can be applied to KV and IO tracing as well. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10811 Test Plan: existing unit tests Old API DB::StartBlockTrace checked with db_bench tool create database ``` ./db_bench --benchmarks="fillseq" \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 ``` To trace block cache accesses when running readrandom benchmark: ``` ./db_bench --benchmarks="readrandom" --use_existing_db --duration=60 \ --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 \ --cache_index_and_filter_blocks --cache_size=1048576 \ --disable_auto_compactions=1 --disable_wal=1 --compression_type=none \ --min_level_to_compress=-1 --compression_ratio=1 --num=10000000 \ --threads=16 \ -block_cache_trace_file="/tmp/binary_trace_test_example" \ -block_cache_trace_max_trace_file_size_in_bytes=1073741824 \ -block_cache_trace_sampling_frequency=1 ``` Reviewed By: anand1976 Differential Revision: D40435289 Pulled By: akankshamahajan15 fbshipit-source-id: fa2755f4788185e19f4605e731641cfd21ab3282
2022-10-21 19:15:35 +00:00
record.is_cache_hit = true;
expected_records.push_back(record);
record.block_type = TraceType::kBlockTraceDataBlock;
expected_records.push_back(record);
expected_records.push_back(record);
VerifyBlockAccessTrace(&c, expected_records);
c.ResetTableReader();
}
// A simple tool that takes the snapshot of block cache statistics.
class BlockCachePropertiesSnapshot {
public:
explicit BlockCachePropertiesSnapshot(Statistics* statistics) {
block_cache_miss = statistics->getTickerCount(BLOCK_CACHE_MISS);
block_cache_hit = statistics->getTickerCount(BLOCK_CACHE_HIT);
index_block_cache_miss = statistics->getTickerCount(BLOCK_CACHE_INDEX_MISS);
index_block_cache_hit = statistics->getTickerCount(BLOCK_CACHE_INDEX_HIT);
data_block_cache_miss = statistics->getTickerCount(BLOCK_CACHE_DATA_MISS);
data_block_cache_hit = statistics->getTickerCount(BLOCK_CACHE_DATA_HIT);
filter_block_cache_miss =
statistics->getTickerCount(BLOCK_CACHE_FILTER_MISS);
filter_block_cache_hit = statistics->getTickerCount(BLOCK_CACHE_FILTER_HIT);
block_cache_bytes_read = statistics->getTickerCount(BLOCK_CACHE_BYTES_READ);
block_cache_bytes_write =
statistics->getTickerCount(BLOCK_CACHE_BYTES_WRITE);
}
void AssertIndexBlockStat(int64_t expected_index_block_cache_miss,
int64_t expected_index_block_cache_hit) {
ASSERT_EQ(expected_index_block_cache_miss, index_block_cache_miss);
ASSERT_EQ(expected_index_block_cache_hit, index_block_cache_hit);
}
void AssertFilterBlockStat(int64_t expected_filter_block_cache_miss,
int64_t expected_filter_block_cache_hit) {
ASSERT_EQ(expected_filter_block_cache_miss, filter_block_cache_miss);
ASSERT_EQ(expected_filter_block_cache_hit, filter_block_cache_hit);
}
// Check if the fetched props matches the expected ones.
// TODO(kailiu) Use this only when you disabled filter policy!
void AssertEqual(int64_t expected_index_block_cache_miss,
int64_t expected_index_block_cache_hit,
int64_t expected_data_block_cache_miss,
int64_t expected_data_block_cache_hit) const {
ASSERT_EQ(expected_index_block_cache_miss, index_block_cache_miss);
ASSERT_EQ(expected_index_block_cache_hit, index_block_cache_hit);
ASSERT_EQ(expected_data_block_cache_miss, data_block_cache_miss);
ASSERT_EQ(expected_data_block_cache_hit, data_block_cache_hit);
ASSERT_EQ(expected_index_block_cache_miss + expected_data_block_cache_miss,
block_cache_miss);
ASSERT_EQ(expected_index_block_cache_hit + expected_data_block_cache_hit,
block_cache_hit);
}
int64_t GetCacheBytesRead() { return block_cache_bytes_read; }
int64_t GetCacheBytesWrite() { return block_cache_bytes_write; }
private:
int64_t block_cache_miss = 0;
int64_t block_cache_hit = 0;
int64_t index_block_cache_miss = 0;
int64_t index_block_cache_hit = 0;
int64_t data_block_cache_miss = 0;
int64_t data_block_cache_hit = 0;
int64_t filter_block_cache_miss = 0;
int64_t filter_block_cache_hit = 0;
int64_t block_cache_bytes_read = 0;
int64_t block_cache_bytes_write = 0;
};
// Make sure, by default, index/filter blocks were pre-loaded (meaning we won't
// use block cache to store them).
TEST_P(BlockBasedTableTest, BlockCacheDisabledTest) {
Options options;
options.create_if_missing = true;
options.statistics = CreateDBStatistics();
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_cache = NewLRUCache(1024, 4);
table_options.filter_policy.reset(NewBloomFilterPolicy(10));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("key", "value");
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
// preloading filter/index blocks is enabled.
auto reader = dynamic_cast<BlockBasedTable*>(c.GetTableReader());
ASSERT_FALSE(reader->TEST_FilterBlockInCache());
ASSERT_FALSE(reader->TEST_IndexBlockInCache());
{
// nothing happens in the beginning
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertIndexBlockStat(0, 0);
props.AssertFilterBlockStat(0, 0);
}
{
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, Slice(), nullptr, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
// a hack that just to trigger BlockBasedTable::GetFilter.
ASSERT_OK(reader->Get(ReadOptions(), "non-exist-key", &get_context,
moptions.prefix_extractor.get()));
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertIndexBlockStat(0, 0);
props.AssertFilterBlockStat(0, 0);
}
}
// Due to the difficulities of the intersaction between statistics, this test
// only tests the case when "index block is put to block cache"
TEST_P(BlockBasedTableTest, FilterBlockInBlockCache) {
// -- Table construction
Options options;
options.create_if_missing = true;
options.statistics = CreateDBStatistics();
// Enable the cache for index/filter blocks
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
LRUCacheOptions co;
co.capacity = 2048;
co.num_shard_bits = 2;
co.metadata_charge_policy = kDontChargeCacheMetadata;
table_options.block_cache = NewLRUCache(co);
table_options.cache_index_and_filter_blocks = true;
options.table_factory.reset(new BlockBasedTableFactory(table_options));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("key", "value");
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
// preloading filter/index blocks is prohibited.
auto* reader = dynamic_cast<BlockBasedTable*>(c.GetTableReader());
ASSERT_FALSE(reader->TEST_FilterBlockInCache());
ASSERT_TRUE(reader->TEST_IndexBlockInCache());
// -- PART 1: Open with regular block cache.
// Since block_cache is disabled, no cache activities will be involved.
std::unique_ptr<InternalIterator> iter;
int64_t last_cache_bytes_read = 0;
// At first, no block will be accessed.
{
BlockCachePropertiesSnapshot props(options.statistics.get());
// index will be added to block cache.
props.AssertEqual(1, // index block miss
0, 0, 0);
ASSERT_EQ(props.GetCacheBytesRead(), 0);
ASSERT_EQ(props.GetCacheBytesWrite(),
static_cast<int64_t>(table_options.block_cache->GetUsage()));
last_cache_bytes_read = props.GetCacheBytesRead();
}
// Only index block will be accessed
{
iter.reset(c.NewIterator(moptions.prefix_extractor.get()));
BlockCachePropertiesSnapshot props(options.statistics.get());
// NOTE: to help better highlight the "detla" of each ticker, I use
// <last_value> + <added_value> to indicate the increment of changed
// value; other numbers remain the same.
props.AssertEqual(1, 0 + 1, // index block hit
0, 0);
// Cache hit, bytes read from cache should increase
ASSERT_GT(props.GetCacheBytesRead(), last_cache_bytes_read);
ASSERT_EQ(props.GetCacheBytesWrite(),
static_cast<int64_t>(table_options.block_cache->GetUsage()));
last_cache_bytes_read = props.GetCacheBytesRead();
}
// Only data block will be accessed
{
iter->SeekToFirst();
ASSERT_OK(iter->status());
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertEqual(1, 1, 0 + 1, // data block miss
0);
// Cache miss, Bytes read from cache should not change
ASSERT_EQ(props.GetCacheBytesRead(), last_cache_bytes_read);
ASSERT_EQ(props.GetCacheBytesWrite(),
static_cast<int64_t>(table_options.block_cache->GetUsage()));
last_cache_bytes_read = props.GetCacheBytesRead();
}
// Data block will be in cache
{
iter.reset(c.NewIterator(moptions.prefix_extractor.get()));
iter->SeekToFirst();
ASSERT_OK(iter->status());
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertEqual(1, 1 + 1, /* index block hit */
1, 0 + 1 /* data block hit */);
// Cache hit, bytes read from cache should increase
ASSERT_GT(props.GetCacheBytesRead(), last_cache_bytes_read);
ASSERT_EQ(props.GetCacheBytesWrite(),
static_cast<int64_t>(table_options.block_cache->GetUsage()));
}
// release the iterator so that the block cache can reset correctly.
iter.reset();
c.ResetTableReader();
// -- PART 2: Open with very small block cache
// In this test, no block will ever get hit since the block cache is
// too small to fit even one entry.
table_options.block_cache = NewLRUCache(1, 4);
options.statistics = CreateDBStatistics();
options.table_factory.reset(new BlockBasedTableFactory(table_options));
const ImmutableOptions ioptions2(options);
const MutableCFOptions moptions2(options);
ASSERT_OK(c.Reopen(ioptions2, moptions2));
{
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertEqual(1, // index block miss
0, 0, 0);
// Cache miss, Bytes read from cache should not change
ASSERT_EQ(props.GetCacheBytesRead(), 0);
}
{
// Both index and data block get accessed.
// It first cache index block then data block. But since the cache size
// is only 1, index block will be purged after data block is inserted.
iter.reset(c.NewIterator(moptions2.prefix_extractor.get()));
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertEqual(1 + 1, // index block miss
0, 0, // data block miss
0);
// Cache hit, bytes read from cache should increase
ASSERT_EQ(props.GetCacheBytesRead(), 0);
}
{
// SeekToFirst() accesses data block. With similar reason, we expect data
// block's cache miss.
iter->SeekToFirst();
ASSERT_OK(iter->status());
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertEqual(2, 0, 0 + 1, // data block miss
0);
// Cache miss, Bytes read from cache should not change
ASSERT_EQ(props.GetCacheBytesRead(), 0);
}
iter.reset();
c.ResetTableReader();
// -- PART 3: Open table with bloom filter enabled but not in SST file
table_options.block_cache = NewLRUCache(4096, 4);
table_options.cache_index_and_filter_blocks = false;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
TableConstructor c3(BytewiseComparator());
std::string user_key = "k01";
InternalKey internal_key(user_key, 0, kTypeValue);
c3.Add(internal_key.Encode().ToString(), "hello");
ImmutableOptions ioptions3(options);
MutableCFOptions moptions3(options);
// Generate table without filter policy
c3.Finish(options, ioptions3, moptions3, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
c3.ResetTableReader();
// Open table with filter policy
table_options.filter_policy.reset(NewBloomFilterPolicy(1));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
options.statistics = CreateDBStatistics();
ImmutableOptions ioptions4(options);
MutableCFOptions moptions4(options);
ASSERT_OK(c3.Reopen(ioptions4, moptions4));
reader = dynamic_cast<BlockBasedTable*>(c3.GetTableReader());
ASSERT_FALSE(reader->TEST_FilterBlockInCache());
PinnableSlice value;
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, user_key, &value, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
ASSERT_OK(reader->Get(ReadOptions(), internal_key.Encode(), &get_context,
moptions4.prefix_extractor.get()));
ASSERT_STREQ(value.data(), "hello");
BlockCachePropertiesSnapshot props(options.statistics.get());
props.AssertFilterBlockStat(0, 0);
c3.ResetTableReader();
}
void ValidateBlockSizeDeviation(int value, int expected) {
BlockBasedTableOptions table_options;
table_options.block_size_deviation = value;
BlockBasedTableFactory* factory = new BlockBasedTableFactory(table_options);
const BlockBasedTableOptions* normalized_table_options =
factory->GetOptions<BlockBasedTableOptions>();
ASSERT_EQ(normalized_table_options->block_size_deviation, expected);
delete factory;
}
void ValidateBlockRestartInterval(int value, int expected) {
BlockBasedTableOptions table_options;
table_options.block_restart_interval = value;
BlockBasedTableFactory* factory = new BlockBasedTableFactory(table_options);
const BlockBasedTableOptions* normalized_table_options =
factory->GetOptions<BlockBasedTableOptions>();
ASSERT_EQ(normalized_table_options->block_restart_interval, expected);
delete factory;
}
TEST_P(BlockBasedTableTest, InvalidOptions) {
// invalid values for block_size_deviation (<0 or >100) are silently set to 0
ValidateBlockSizeDeviation(-10, 0);
ValidateBlockSizeDeviation(-1, 0);
ValidateBlockSizeDeviation(0, 0);
ValidateBlockSizeDeviation(1, 1);
ValidateBlockSizeDeviation(99, 99);
ValidateBlockSizeDeviation(100, 100);
ValidateBlockSizeDeviation(101, 0);
ValidateBlockSizeDeviation(1000, 0);
// invalid values for block_restart_interval (<1) are silently set to 1
ValidateBlockRestartInterval(-10, 1);
ValidateBlockRestartInterval(-1, 1);
ValidateBlockRestartInterval(0, 1);
ValidateBlockRestartInterval(1, 1);
ValidateBlockRestartInterval(2, 2);
ValidateBlockRestartInterval(1000, 1000);
}
TEST_P(BlockBasedTableTest, BlockReadCountTest) {
Hide deprecated, inefficient block-based filter from public API (#9535) Summary: This change removes the ability to configure the deprecated, inefficient block-based filter in the public API. Options that would have enabled it now use "full" (and optionally partitioned) filters. Existing block-based filters can still be read and used, and a "back door" way to build them still exists, for testing and in case of trouble. About the only way this removal would cause an issue for users is if temporary memory for filter construction greatly increases. In HISTORY.md we suggest a few possible mitigations: partitioned filters, smaller SST files, or setting reserve_table_builder_memory=true. Or users who have customized a FilterPolicy using the CreateFilter/KeyMayMatch mechanism removed in https://github.com/facebook/rocksdb/issues/9501 will have to upgrade their code. (It's long past time for people to move to the new builder/reader customization interface.) This change also introduces some internal-use-only configuration strings for testing specific filter implementations while bypassing some compatibility / intelligence logic. This is intended to hint at a path toward making FilterPolicy Customizable, but it also gives us a "back door" way to configure block-based filter. Aside: updated db_bench so that -readonly implies -use_existing_db Pull Request resolved: https://github.com/facebook/rocksdb/pull/9535 Test Plan: Unit tests updated. Specifically, * BlockBasedTableTest.BlockReadCountTest is tweaked to validate the back door configuration interface and ignoring of `use_block_based_builder`. * BlockBasedTableTest.TracingGetTest is migrated from testing block-based filter access pattern to full filter access patter, by re-ordering some things. * Options test (pretty self-explanatory) Performance test - create with `./db_bench -db=/dev/shm/rocksdb1 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0` with and without `-use_block_based_filter`, which creates a DB with 21 SST files in L0. Read with `./db_bench -db=/dev/shm/rocksdb1 -readonly -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=30` Without -use_block_based_filter: readrandom 464 ops/sec, 689280 KB DB With -use_block_based_filter: readrandom 169 ops/sec, 690996 KB DB No consistent difference with fillrandom Reviewed By: jay-zhuang Differential Revision: D34153871 Pulled By: pdillinger fbshipit-source-id: 31f4a933c542f8f09aca47fa64aec67832a69738
2022-02-12 15:04:09 +00:00
// bloom_filter_type = 1 -- full filter using use_block_based_builder=false
// bloom_filter_type = 2 -- full filter using use_block_based_builder=true
// because of API change to hide block-based filter
Remove deprecated block-based filter (#10184) Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
2022-06-16 22:51:33 +00:00
for (int bloom_filter_type = 1; bloom_filter_type <= 2; ++bloom_filter_type) {
for (int index_and_filter_in_cache = 0; index_and_filter_in_cache < 2;
++index_and_filter_in_cache) {
Options options;
options.create_if_missing = true;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_cache = NewLRUCache(1, 0);
table_options.cache_index_and_filter_blocks = index_and_filter_in_cache;
Remove deprecated block-based filter (#10184) Summary: In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using the public API, because of its inefficiency. Although we normally maintain read compatibility on old DBs forever, filters are not required for reading a DB, only for optimizing read performance. Thus, it should be acceptable to remove this code and the substantial maintenance burden it carries as useful features are developed and validated (such as user timestamp). This change completely removes the code for reading and writing the old block-based filters, net removing about 1370 lines of code no longer needed. Options removed from testing / benchmarking tools. The prior existence is only evident in a couple of places: * `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in a major release to minimize source code incompatibilities. * A warning is logged when an old table file is opened that used the old block-based filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing should suffice. Unfortunately, sst_dump does not tell you whether a file uses block-based filter, and the structure of the code makes it very difficult to fix. * To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`) for metaindex is maintained (for now). Other notes: * In some cases where numbers are associated with filter configurations, we have had to update the assigned numbers so that they all correspond to something that exists. * Fixed potential stat counting bug by assuming `filter_checked = false` for cases like `filter == nullptr` rather than assuming `filter_checked = true` * Removed obsolete `block_offset` and `prefix_extractor` parameters from several functions. * Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)` because the caller guarantees the prefix extractor exists and is compatible Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184 Test Plan: tests updated, manually test new warning in LOG using base version to generate a DB Reviewed By: riversand963 Differential Revision: D37212647 Pulled By: pdillinger fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
2022-06-16 22:51:33 +00:00
table_options.filter_policy.reset(
NewBloomFilterPolicy(10, bloom_filter_type == 2));
options.table_factory.reset(new BlockBasedTableFactory(table_options));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
TableConstructor c(BytewiseComparator());
std::string user_key = "k04";
InternalKey internal_key(user_key, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
c.Add(encoded_key, "hello");
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
// Generate table with filter policy
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
auto reader = c.GetTableReader();
PinnableSlice value;
{
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, user_key, &value, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
get_perf_context()->Reset();
ASSERT_OK(reader->Get(ReadOptions(), encoded_key, &get_context,
moptions.prefix_extractor.get()));
if (index_and_filter_in_cache) {
// data, index and filter block
ASSERT_EQ(get_perf_context()->block_read_count, 3);
ASSERT_EQ(get_perf_context()->index_block_read_count, 1);
ASSERT_EQ(get_perf_context()->filter_block_read_count, 1);
} else {
// just the data block
ASSERT_EQ(get_perf_context()->block_read_count, 1);
}
ASSERT_EQ(get_context.State(), GetContext::kFound);
ASSERT_STREQ(value.data(), "hello");
}
// Get non-existing key
user_key = "does-not-exist";
internal_key = InternalKey(user_key, 0, kTypeValue);
encoded_key = internal_key.Encode().ToString();
value.Reset();
{
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, user_key, &value, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
get_perf_context()->Reset();
ASSERT_OK(reader->Get(ReadOptions(), encoded_key, &get_context,
moptions.prefix_extractor.get()));
ASSERT_EQ(get_context.State(), GetContext::kNotFound);
}
if (index_and_filter_in_cache) {
if (bloom_filter_type == 0) {
// with block-based, we read index and then the filter
ASSERT_EQ(get_perf_context()->block_read_count, 2);
ASSERT_EQ(get_perf_context()->index_block_read_count, 1);
ASSERT_EQ(get_perf_context()->filter_block_read_count, 1);
} else {
// with full-filter, we read filter first and then we stop
ASSERT_EQ(get_perf_context()->block_read_count, 1);
ASSERT_EQ(get_perf_context()->filter_block_read_count, 1);
}
} else {
// filter is already in memory and it figures out that the key doesn't
// exist
ASSERT_EQ(get_perf_context()->block_read_count, 0);
}
}
}
}
TEST_P(BlockBasedTableTest, BlockCacheLeak) {
// Check that when we reopen a table we don't lose access to blocks already
// in the cache. This test checks whether the Table actually makes use of the
// unique ID from the file.
Options opt;
std::unique_ptr<InternalKeyComparator> ikc;
ikc.reset(new test::PlainInternalKeyComparator(opt.comparator));
opt.compression = kNoCompression;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.block_size = 1024;
// big enough so we don't ever lose cached values.
table_options.block_cache = NewLRUCache(16 * 1024 * 1024, 4);
opt.table_factory.reset(NewBlockBasedTableFactory(table_options));
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("k01", "hello");
c.Add("k02", "hello2");
c.Add("k03", std::string(10000, 'x'));
c.Add("k04", std::string(200000, 'x'));
c.Add("k05", std::string(300000, 'x'));
c.Add("k06", "hello3");
c.Add("k07", std::string(100000, 'x'));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(opt);
const MutableCFOptions moptions(opt);
c.Finish(opt, ioptions, moptions, table_options, *ikc, &keys, &kvmap);
std::unique_ptr<InternalIterator> iter(
c.NewIterator(moptions.prefix_extractor.get()));
iter->SeekToFirst();
while (iter->Valid()) {
iter->key();
iter->value();
iter->Next();
}
ASSERT_OK(iter->status());
Change and clarify the relationship between Valid(), status() and Seek*() for all iterators. Also fix some bugs Summary: Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are: * If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted. * When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not. However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours). This PR changes the convention to: * If status() is not ok, Valid() always returns false. * Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.) This does sacrifice the two use cases listed above, but siying said it's ok. Overview of the changes: * A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario. * Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed. * A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator. To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types: Iterators that didn't need changes: * status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator. * Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator. Iterators with changes (see inline comments for details): * DBIter - an overhaul: - It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back. - It had a few code paths silently discarding subiterator's status. The stress test caught a few. - The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example. - Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption. - It used to not reset status on seek for some types of errors. - Some simplifications and better comments. - Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer. * MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status. * ForwardIterator - changed to the new convention, also slightly simplified. * ForwardLevelIterator - fixed some bugs and simplified. * LevelIterator - simplified. * TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_. * BlockBasedTableIterator - minor changes. * BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid. * PlainTableIterator - some seeks used to not reset status. * CuckooTableIterator - tiny code cleanup. * ManagedIterator - fixed some bugs. * BaseDeltaIterator - changed to the new convention and fixed a bug. * BlobDBIterator - seeks used to not reset status. * KeyConvertingIterator - some small change. Closes https://github.com/facebook/rocksdb/pull/3810 Differential Revision: D7888019 Pulled By: al13n321 fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
2018-05-17 09:44:14 +00:00
iter.reset();
const ImmutableOptions ioptions1(opt);
const MutableCFOptions moptions1(opt);
ASSERT_OK(c.Reopen(ioptions1, moptions1));
auto table_reader = dynamic_cast<BlockBasedTable*>(c.GetTableReader());
for (const std::string& key : keys) {
InternalKey ikey(key, kMaxSequenceNumber, kTypeValue);
ASSERT_TRUE(table_reader->TEST_KeyInCache(ReadOptions(), ikey.Encode()));
}
c.ResetTableReader();
// rerun with different block cache
table_options.block_cache = NewLRUCache(16 * 1024 * 1024, 4);
opt.table_factory.reset(NewBlockBasedTableFactory(table_options));
const ImmutableOptions ioptions2(opt);
const MutableCFOptions moptions2(opt);
ASSERT_OK(c.Reopen(ioptions2, moptions2));
table_reader = dynamic_cast<BlockBasedTable*>(c.GetTableReader());
for (const std::string& key : keys) {
InternalKey ikey(key, kMaxSequenceNumber, kTypeValue);
ASSERT_TRUE(!table_reader->TEST_KeyInCache(ReadOptions(), ikey.Encode()));
}
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, MemoryAllocator) {
auto default_memory_allocator = std::make_shared<DefaultMemoryAllocator>();
auto custom_memory_allocator =
std::make_shared<CountedMemoryAllocator>(default_memory_allocator);
{
Options opt;
std::unique_ptr<InternalKeyComparator> ikc;
ikc.reset(new test::PlainInternalKeyComparator(opt.comparator));
opt.compression = kNoCompression;
BlockBasedTableOptions table_options;
table_options.block_size = 1024;
LRUCacheOptions lruOptions;
lruOptions.memory_allocator = custom_memory_allocator;
lruOptions.capacity = 16 * 1024 * 1024;
lruOptions.num_shard_bits = 4;
table_options.block_cache = NewLRUCache(std::move(lruOptions));
opt.table_factory.reset(NewBlockBasedTableFactory(table_options));
TableConstructor c(BytewiseComparator(),
true /* convert_to_internal_key_ */);
c.Add("k01", "hello");
c.Add("k02", "hello2");
c.Add("k03", std::string(10000, 'x'));
c.Add("k04", std::string(200000, 'x'));
c.Add("k05", std::string(300000, 'x'));
c.Add("k06", "hello3");
c.Add("k07", std::string(100000, 'x'));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(opt);
const MutableCFOptions moptions(opt);
c.Finish(opt, ioptions, moptions, table_options, *ikc, &keys, &kvmap);
std::unique_ptr<InternalIterator> iter(
c.NewIterator(moptions.prefix_extractor.get()));
iter->SeekToFirst();
while (iter->Valid()) {
iter->key();
iter->value();
iter->Next();
}
ASSERT_OK(iter->status());
}
// out of scope, block cache should have been deleted, all allocations
// deallocated
EXPECT_EQ(custom_memory_allocator->GetNumAllocations(),
custom_memory_allocator->GetNumDeallocations());
// make sure that allocations actually happened through the cache allocator
EXPECT_GT(custom_memory_allocator->GetNumAllocations(), 0);
}
// Test the file checksum of block based table
TEST_P(BlockBasedTableTest, NoFileChecksum) {
Options options;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
int level = 0;
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
FileChecksumTestHelper f(true);
f.CreateWritableFile();
std::unique_ptr<TableBuilder> builder;
builder.reset(ioptions.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, *comparator,
&int_tbl_prop_collector_factories,
options.compression, options.compression_opts,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
kUnknownColumnFamily, column_family_name, level),
f.GetFileWriter()));
ASSERT_OK(f.ResetTableBuilder(std::move(builder)));
f.AddKVtoKVMap(1000);
ASSERT_OK(f.WriteKVAndFlushTable());
ASSERT_STREQ(f.GetFileChecksumFuncName(), kUnknownFileChecksumFuncName);
ASSERT_STREQ(f.GetFileChecksum().c_str(), kUnknownFileChecksum);
}
TEST_P(BlockBasedTableTest, Crc32cFileChecksum) {
FileChecksumGenCrc32cFactory* file_checksum_gen_factory =
new FileChecksumGenCrc32cFactory();
Options options;
options.file_checksum_gen_factory.reset(file_checksum_gen_factory);
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
int level = 0;
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
FileChecksumGenContext gen_context;
gen_context.file_name = "db/tmp";
std::unique_ptr<FileChecksumGenerator> checksum_crc32c_gen1 =
options.file_checksum_gen_factory->CreateFileChecksumGenerator(
gen_context);
FileChecksumTestHelper f(true);
f.CreateWritableFile();
f.SetFileChecksumGenerator(checksum_crc32c_gen1.release());
std::unique_ptr<TableBuilder> builder;
builder.reset(ioptions.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, *comparator,
&int_tbl_prop_collector_factories,
options.compression, options.compression_opts,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
kUnknownColumnFamily, column_family_name, level),
f.GetFileWriter()));
ASSERT_OK(f.ResetTableBuilder(std::move(builder)));
f.AddKVtoKVMap(1000);
ASSERT_OK(f.WriteKVAndFlushTable());
ASSERT_STREQ(f.GetFileChecksumFuncName(), "FileChecksumCrc32c");
std::unique_ptr<FileChecksumGenerator> checksum_crc32c_gen2 =
options.file_checksum_gen_factory->CreateFileChecksumGenerator(
gen_context);
std::string checksum;
ASSERT_OK(f.CalculateFileChecksum(checksum_crc32c_gen2.get(), &checksum));
ASSERT_STREQ(f.GetFileChecksum().c_str(), checksum.c_str());
// Unit test the generator itself for schema stability
std::unique_ptr<FileChecksumGenerator> checksum_crc32c_gen3 =
options.file_checksum_gen_factory->CreateFileChecksumGenerator(
gen_context);
const char data[] = "here is some data";
checksum_crc32c_gen3->Update(data, sizeof(data));
checksum_crc32c_gen3->Finalize();
checksum = checksum_crc32c_gen3->GetChecksum();
ASSERT_STREQ(checksum.c_str(), "\345\245\277\110");
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(PlainTableTest, BasicPlainTableProperties) {
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = 8;
plain_table_options.bloom_bits_per_key = 8;
plain_table_options.hash_table_ratio = 0;
PlainTableFactory factory(plain_table_options);
std::unique_ptr<FSWritableFile> sink(new test::StringSink());
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(sink), "" /* don't care */, FileOptions()));
Options options;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
int unknown_level = -1;
std::unique_ptr<TableBuilder> builder(factory.NewTableBuilder(
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
CompressionOptions(), kUnknownColumnFamily,
column_family_name, unknown_level),
file_writer.get()));
for (char c = 'a'; c <= 'z'; ++c) {
std::string key(8, c);
key.append("\1 "); // PlainTable expects internal key structure
std::string value(28, c + 42);
builder->Add(key, value);
}
ASSERT_OK(builder->Finish());
ASSERT_OK(file_writer->Flush());
test::StringSink* ss =
static_cast<test::StringSink*>(file_writer->writable_file());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(ss->contents(), 72242, true));
std::unique_ptr<RandomAccessFileReader> file_reader(
new RandomAccessFileReader(std::move(source), "test"));
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
std::unique_ptr<TableProperties> props;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
auto s = ReadTableProperties(file_reader.get(), ss->contents().size(),
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
kPlainTableMagicNumber, ioptions, read_options,
&props);
ASSERT_OK(s);
ASSERT_EQ(0ul, props->index_size);
ASSERT_EQ(0ul, props->filter_size);
ASSERT_EQ(16ul * 26, props->raw_key_size);
ASSERT_EQ(28ul * 26, props->raw_value_size);
ASSERT_EQ(26ul, props->num_entries);
ASSERT_EQ(1ul, props->num_data_blocks);
}
TEST_F(PlainTableTest, NoFileChecksum) {
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = 20;
plain_table_options.bloom_bits_per_key = 8;
plain_table_options.hash_table_ratio = 0;
PlainTableFactory factory(plain_table_options);
Options options;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
int unknown_level = -1;
FileChecksumTestHelper f(true);
f.CreateWritableFile();
std::unique_ptr<TableBuilder> builder(factory.NewTableBuilder(
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
CompressionOptions(), kUnknownColumnFamily,
column_family_name, unknown_level),
f.GetFileWriter()));
ASSERT_OK(f.ResetTableBuilder(std::move(builder)));
f.AddKVtoKVMap(1000);
ASSERT_OK(f.WriteKVAndFlushTable());
ASSERT_STREQ(f.GetFileChecksumFuncName(), kUnknownFileChecksumFuncName);
EXPECT_EQ(f.GetFileChecksum(), kUnknownFileChecksum);
}
TEST_F(PlainTableTest, Crc32cFileChecksum) {
PlainTableOptions plain_table_options;
plain_table_options.user_key_len = 20;
plain_table_options.bloom_bits_per_key = 8;
plain_table_options.hash_table_ratio = 0;
PlainTableFactory factory(plain_table_options);
FileChecksumGenCrc32cFactory* file_checksum_gen_factory =
new FileChecksumGenCrc32cFactory();
Options options;
options.file_checksum_gen_factory.reset(file_checksum_gen_factory);
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
int unknown_level = -1;
FileChecksumGenContext gen_context;
gen_context.file_name = "db/tmp";
std::unique_ptr<FileChecksumGenerator> checksum_crc32c_gen1 =
options.file_checksum_gen_factory->CreateFileChecksumGenerator(
gen_context);
FileChecksumTestHelper f(true);
f.CreateWritableFile();
f.SetFileChecksumGenerator(checksum_crc32c_gen1.release());
std::unique_ptr<TableBuilder> builder(factory.NewTableBuilder(
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
CompressionOptions(), kUnknownColumnFamily,
column_family_name, unknown_level),
f.GetFileWriter()));
ASSERT_OK(f.ResetTableBuilder(std::move(builder)));
f.AddKVtoKVMap(1000);
ASSERT_OK(f.WriteKVAndFlushTable());
ASSERT_STREQ(f.GetFileChecksumFuncName(), "FileChecksumCrc32c");
std::unique_ptr<FileChecksumGenerator> checksum_crc32c_gen2 =
options.file_checksum_gen_factory->CreateFileChecksumGenerator(
gen_context);
std::string checksum;
ASSERT_OK(f.CalculateFileChecksum(checksum_crc32c_gen2.get(), &checksum));
EXPECT_STREQ(f.GetFileChecksum().c_str(), checksum.c_str());
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(GeneralTableTest, ApproximateOffsetOfPlain) {
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("k01", "hello");
c.Add("k02", "hello2");
c.Add("k03", std::string(10000, 'x'));
c.Add("k04", std::string(200000, 'x'));
c.Add("k05", std::string(300000, 'x'));
c.Add("k06", "hello3");
c.Add("k07", std::string(100000, 'x'));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
options.db_host_id = "";
test::PlainInternalKeyComparator internal_comparator(options.comparator);
options.compression = kNoCompression;
BlockBasedTableOptions table_options;
table_options.block_size = 1024;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options, internal_comparator,
&keys, &kvmap);
ASSERT_TRUE(Between(c.ApproximateOffsetOf("abc"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k01"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k01a"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k02"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k03"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k04"), 10000, 11000));
// k04 and k05 will be in two consecutive blocks, the index is
// an arbitrary slice between k04 and k05, either before or after k04a
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k04a"), 10000, 211000));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k05"), 210000, 211000));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k06"), 510000, 511000));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k07"), 510000, 511000));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("xyz"), 610000, 612000));
c.ResetTableReader();
}
static void DoCompressionTest(CompressionType comp) {
SCOPED_TRACE("CompressionType = " + CompressionTypeToString(comp));
Random rnd(301);
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
std::string tmp;
c.Add("k01", "hello");
c.Add("k02", test::CompressibleString(&rnd, 0.25, 10000, &tmp));
c.Add("k03", "hello3");
c.Add("k04", test::CompressibleString(&rnd, 0.25, 10000, &tmp));
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
test::PlainInternalKeyComparator ikc(options.comparator);
options.compression = comp;
BlockBasedTableOptions table_options;
table_options.block_size = 1024;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options, ikc, &keys, &kvmap);
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784) Summary: The implementation of GetApproximateSizes was inconsistent in its treatment of the size of non-data blocks of SST files, sometimes including and sometimes now. This was at its worst with large portion of table file used by filters and querying a small range that crossed a table boundary: the size estimate would include large filter size. It's conceivable that someone might want only to know the size in terms of data blocks, but I believe that's unlikely enough to ignore for now. Similarly, there's no evidence the internal function AppoximateOffsetOf is used for anything other than a one-sided ApproximateSize, so I intend to refactor to remove redundancy in a follow-up commit. So to fix this, GetApproximateSizes (and implementation details ApproximateSize and ApproximateOffsetOf) now consistently include in their returned sizes a portion of table file metadata (incl filters and indexes) based on the size portion of the data blocks in range. In other words, if a key range covers data blocks that are X% by size of all the table's data blocks, returned approximate size is X% of the total file size. It would technically be more accurate to attribute metadata based on number of keys, but that's not computationally efficient with data available and rarely a meaningful difference. Also includes miscellaneous comment improvements / clarifications. Also included is a new approximatesizerandom benchmark for db_bench. No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784 Test Plan: Test added to DBTest.ApproximateSizesFilesWithErrorMargin. Old code running new test... [ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin db/db_test.cc:1562: Failure Expected: (size) <= (11 * 100), actual: 9478 vs 1100 Other tests updated to reflect consistent accounting of metadata. Reviewed By: siying Differential Revision: D21334706 Pulled By: pdillinger fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
2020-06-02 19:27:59 +00:00
ASSERT_TRUE(Between(c.ApproximateOffsetOf("abc"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k01"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k02"), 0, 0));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k03"), 2000, 3550));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("k04"), 2000, 3550));
ASSERT_TRUE(Between(c.ApproximateOffsetOf("xyz"), 4000, 7075));
c.ResetTableReader();
}
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(GeneralTableTest, ApproximateOffsetOfCompressed) {
std::vector<CompressionType> compression_state;
if (!Snappy_Supported()) {
fprintf(stderr, "skipping snappy compression tests\n");
} else {
compression_state.push_back(kSnappyCompression);
}
if (!Zlib_Supported()) {
fprintf(stderr, "skipping zlib compression tests\n");
} else {
compression_state.push_back(kZlibCompression);
}
// TODO(kailiu) DoCompressionTest() doesn't work with BZip2.
/*
if (!BZip2_Supported()) {
2014-02-08 02:12:30 +00:00
fprintf(stderr, "skipping bzip2 compression tests\n");
} else {
compression_state.push_back(kBZip2Compression);
2014-02-08 02:12:30 +00:00
}
*/
2014-02-08 02:12:30 +00:00
if (!LZ4_Supported()) {
fprintf(stderr, "skipping lz4 and lz4hc compression tests\n");
2014-02-08 02:12:30 +00:00
} else {
compression_state.push_back(kLZ4Compression);
compression_state.push_back(kLZ4HCCompression);
}
if (!XPRESS_Supported()) {
fprintf(stderr, "skipping xpress and xpress compression tests\n");
} else {
compression_state.push_back(kXpressCompression);
}
for (auto state : compression_state) {
DoCompressionTest(state);
}
}
TEST_F(GeneralTableTest, ApproximateKeyAnchors) {
Random rnd(301);
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
std::string tmp;
for (int i = 1000; i < 9000; i++) {
c.Add(std::to_string(i), rnd.RandomString(2000));
}
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
InternalKeyComparator ikc(options.comparator);
options.compression = kNoCompression;
BlockBasedTableOptions table_options;
table_options.block_size = 4096;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options, ikc, &keys, &kvmap);
std::vector<TableReader::Anchor> anchors;
ASSERT_OK(c.GetTableReader()->ApproximateKeyAnchors(ReadOptions(), anchors));
// The target is 128 anchors. But in reality it can be slightly more or fewer.
ASSERT_GT(anchors.size(), 120);
ASSERT_LT(anchors.size(), 140);
// We have around 8000 keys. With 128 anchors, in average 62.5 keys per
// anchor. Here we take a rough range and estimate the distance between
// anchors is between 50 and 100.
// Total data size is about 18,000,000, so each anchor range is about
// 140,625. We also take a rough range.
int prev_num = 1000;
// Non-last anchor
for (size_t i = 0; i + 1 < anchors.size(); i++) {
auto& anchor = anchors[i];
ASSERT_GT(anchor.range_size, 100000);
ASSERT_LT(anchor.range_size, 200000);
// Key might be shortened, so fill 0 in the end if it is the case.
std::string key_cpy = anchor.user_key;
key_cpy.append(4 - key_cpy.size(), '0');
int num = std::stoi(key_cpy);
ASSERT_GT(num - prev_num, 50);
ASSERT_LT(num - prev_num, 100);
prev_num = num;
}
ASSERT_EQ("8999", anchors.back().user_key);
ASSERT_LT(anchors.back().range_size, 200000);
c.ResetTableReader();
}
#if !defined(ROCKSDB_VALGRIND_RUN) || defined(ROCKSDB_FULL_VALGRIND_RUN)
TEST_P(ParameterizedHarnessTest, RandomizedHarnessTest) {
Random rnd(test::RandomSeed() + 5);
for (int num_entries = 0; num_entries < 2000;
num_entries += (num_entries < 50 ? 1 : 200)) {
for (int e = 0; e < num_entries; e++) {
Add(test::RandomKey(&rnd, rnd.Skewed(4)),
rnd.RandomString(rnd.Skewed(5)));
}
Test(&rnd);
}
}
TEST_F(DBHarnessTest, RandomizedLongDB) {
Random rnd(test::RandomSeed());
int num_entries = 100000;
for (int e = 0; e < num_entries; e++) {
std::string v;
Add(test::RandomKey(&rnd, rnd.Skewed(4)), rnd.RandomString(rnd.Skewed(5)));
}
Test(&rnd);
// We must have created enough data to force merging
int files = 0;
for (int level = 0; level < db()->NumberLevels(); level++) {
std::string value;
char name[100];
snprintf(name, sizeof(name), "rocksdb.num-files-at-level%d", level);
ASSERT_TRUE(db()->GetProperty(name, &value));
files += atoi(value.c_str());
}
ASSERT_GT(files, 0);
}
#endif // !defined(ROCKSDB_VALGRIND_RUN) || defined(ROCKSDB_FULL_VALGRIND_RUN)
class MemTableTest : public testing::Test {
public:
MemTableTest() {
InternalKeyComparator cmp(BytewiseComparator());
auto table_factory = std::make_shared<SkipListFactory>();
options_.memtable_factory = table_factory;
ImmutableOptions ioptions(options_);
wb_ = new WriteBufferManager(options_.db_write_buffer_size);
memtable_ = new MemTable(cmp, ioptions, MutableCFOptions(options_), wb_,
kMaxSequenceNumber, 0 /* column_family_id */);
memtable_->Ref();
}
~MemTableTest() {
delete memtable_->Unref();
delete wb_;
}
MemTable* GetMemTable() { return memtable_; }
private:
MemTable* memtable_;
Options options_;
WriteBufferManager* wb_;
};
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
TEST_F(MemTableTest, Simple) {
WriteBatch batch;
WriteBatchInternal::SetSequence(&batch, 100);
ASSERT_OK(batch.Put(std::string("k1"), std::string("v1")));
ASSERT_OK(batch.Put(std::string("k2"), std::string("v2")));
ASSERT_OK(batch.Put(std::string("k3"), std::string("v3")));
ASSERT_OK(batch.Put(std::string("largekey"), std::string("vlarge")));
ASSERT_OK(batch.DeleteRange(std::string("chi"), std::string("xigua")));
ASSERT_OK(batch.DeleteRange(std::string("begin"), std::string("end")));
ColumnFamilyMemTablesDefault cf_mems_default(GetMemTable());
support for concurrent adds to memtable Summary: This diff adds support for concurrent adds to the skiplist memtable implementations. Memory allocation is made thread-safe by the addition of a spinlock, with small per-core buffers to avoid contention. Concurrent memtable writes are made via an additional method and don't impose a performance overhead on the non-concurrent case, so parallelism can be selected on a per-batch basis. Write thread synchronization is an increasing bottleneck for higher levels of concurrency, so this diff adds --enable_write_thread_adaptive_yield (default off). This feature causes threads joining a write batch group to spin for a short time (default 100 usec) using sched_yield, rather than going to sleep on a mutex. If the timing of the yield calls indicates that another thread has actually run during the yield then spinning is avoided. This option improves performance for concurrent situations even without parallel adds, although it has the potential to increase CPU usage (and the heuristic adaptation is not yet mature). Parallel writes are not currently compatible with inplace updates, update callbacks, or delete filtering. Enable it with --allow_concurrent_memtable_write (and --enable_write_thread_adaptive_yield). Parallel memtable writes are performance neutral when there is no actual parallelism, and in my experiments (SSD server-class Linux and varying contention and key sizes for fillrandom) they are always a performance win when there is more than one thread. Statistics are updated earlier in the write path, dropping the number of DB mutex acquisitions from 2 to 1 for almost all cases. This diff was motivated and inspired by Yahoo's cLSM work. It is more conservative than cLSM: RocksDB's write batch group leader role is preserved (along with all of the existing flush and write throttling logic) and concurrent writers are blocked until all memtable insertions have completed and the sequence number has been advanced, to preserve linearizability. My test config is "db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000 --block_size=16384 --allow_concurrent_memtable_write" on a two-socket Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1 thread I get ~440Kops/sec. Peak performance for 1 socket (numactl -N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance across both sockets happens at 30 threads, and is ~900Kops/sec, although with fewer threads there is less performance loss when the system has background work. Test Plan: 1. concurrent stress tests for InlineSkipList and DynamicBloom 2. make clean; make check 3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench 4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench 5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench 6. make clean; OPT=-DROCKSDB_LITE make check 7. verify no perf regressions when disabled Reviewers: igor, sdong Reviewed By: sdong Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba Differential Revision: https://reviews.facebook.net/D50589
2015-08-14 23:59:07 +00:00
ASSERT_TRUE(
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
WriteBatchInternal::InsertInto(&batch, &cf_mems_default, nullptr, nullptr)
.ok());
for (int i = 0; i < 2; ++i) {
Arena arena;
ScopedArenaIterator arena_iter_guard;
std::unique_ptr<InternalIterator> iter_guard;
InternalIterator* iter;
if (i == 0) {
iter = GetMemTable()->NewIterator(ReadOptions(), &arena);
arena_iter_guard.set(iter);
} else {
iter = GetMemTable()->NewRangeTombstoneIterator(
Fragment memtable range tombstone in the write path (#10380) Summary: - Right now each read fragments the memtable range tombstones https://github.com/facebook/rocksdb/issues/4808. This PR explores the idea of fragmenting memtable range tombstones in the write path and reads can just read this cached fragmented tombstone without any fragmenting cost. This PR only does the caching for immutable memtable, and does so right before a memtable is added to an immutable memtable list. The fragmentation is done without holding mutex to minimize its performance impact. - db_bench is updated to print out the number of range deletions executed if there is any. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10380 Test Plan: - CI, added asserts in various places to check whether a fragmented range tombstone list should have been constructed. - Benchmark: as this PR only optimizes immutable memtable path, the number of writes in the benchmark is chosen such an immutable memtable is created and range tombstones are in that memtable. ``` single thread: ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=100000 --max_num_range_tombstones=100 multi_thread ./db_bench --benchmarks=fillrandom,readrandom --writes_per_range_tombstone=1 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=15000 --reads=20000 --threads=32 --max_num_range_tombstones=100 ``` Commit 99cdf16464a057ca44de2f747541dedf651bae9e is included in benchmark result. It was an earlier attempt where tombstones are fragmented for each write operation. Reader threads share it using a shared_ptr which would slow down multi-thread read performance as seen in benchmark results. Results are averaged over 5 runs. Single thread result: | Max # tombstones | main fillrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | main readrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | | ------------- | ------------- |------------- |------------- |------------- |------------- |------------- | | 0 |6.68 |6.57 |6.72 |4.72 |4.79 |4.54 | | 1 |6.67 |6.58 |6.62 |5.41 |4.74 |4.72 | | 10 |6.59 |6.5 |6.56 |7.83 |4.69 |4.59 | | 100 |6.62 |6.75 |6.58 |29.57 |5.04 |5.09 | | 1000 |6.54 |6.82 |6.61 |320.33 |5.22 |5.21 | 32-thread result: note that "Max # tombstones" is per thread. | Max # tombstones | main fillrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | main readrandom micros/op | 99cdf16464a057ca44de2f747541dedf651bae9e | Post PR | | ------------- | ------------- |------------- |------------- |------------- |------------- |------------- | | 0 |234.52 |260.25 |239.42 |5.06 |5.38 |5.09 | | 1 |236.46 |262.0 |231.1 |19.57 |22.14 |5.45 | | 10 |236.95 |263.84 |251.49 |151.73 |21.61 |5.73 | | 100 |268.16 |296.8 |280.13 |2308.52 |22.27 |6.57 | Reviewed By: ajkr Differential Revision: D37916564 Pulled By: cbi42 fbshipit-source-id: 05d6d2e16df26c374c57ddcca13a5bfe9d5b731e
2022-08-05 19:02:33 +00:00
ReadOptions(), kMaxSequenceNumber /* read_seq */,
false /* immutable_memtable */);
iter_guard.reset(iter);
}
if (iter == nullptr) {
continue;
}
iter->SeekToFirst();
while (iter->Valid()) {
fprintf(stderr, "key: '%s' -> '%s'\n", iter->key().ToString().c_str(),
iter->value().ToString().c_str());
iter->Next();
}
}
}
// Test the empty key
TEST_P(ParameterizedHarnessTest, SimpleEmptyKey) {
Random rnd(test::RandomSeed() + 1);
Add("", "v");
Test(&rnd);
}
TEST_P(ParameterizedHarnessTest, SimpleSingle) {
Random rnd(test::RandomSeed() + 2);
Add("abc", "v");
Test(&rnd);
}
TEST_P(ParameterizedHarnessTest, SimpleMulti) {
Random rnd(test::RandomSeed() + 3);
Add("abc", "v");
Add("abcd", "v");
Add("ac", "v2");
Test(&rnd);
}
TEST_P(ParameterizedHarnessTest, SimpleSpecialKey) {
Random rnd(test::RandomSeed() + 4);
Add("\xff\xff", "v3");
Test(&rnd);
}
TEST(TableTest, FooterTests) {
Random* r = Random::GetTLSInstance();
uint64_t data_size = (uint64_t{1} << r->Uniform(40)) + r->Uniform(100);
uint64_t index_size = r->Uniform(1000000000);
uint64_t metaindex_size = r->Uniform(1000000);
// 5 == block trailer size
BlockHandle index(data_size + 5, index_size);
BlockHandle meta_index(data_size + index_size + 2 * 5, metaindex_size);
uint64_t footer_offset = data_size + metaindex_size + index_size + 3 * 5;
{
// legacy block based
FooterBuilder footer;
footer.Build(kBlockBasedTableMagicNumber, /* format_version */ 0,
footer_offset, kCRC32c, meta_index, index);
Footer decoded_footer;
ASSERT_OK(decoded_footer.DecodeFrom(footer.GetSlice(), footer_offset));
ASSERT_EQ(decoded_footer.table_magic_number(), kBlockBasedTableMagicNumber);
ASSERT_EQ(decoded_footer.checksum_type(), kCRC32c);
ASSERT_EQ(decoded_footer.metaindex_handle().offset(), meta_index.offset());
ASSERT_EQ(decoded_footer.metaindex_handle().size(), meta_index.size());
ASSERT_EQ(decoded_footer.index_handle().offset(), index.offset());
ASSERT_EQ(decoded_footer.index_handle().size(), index.size());
ASSERT_EQ(decoded_footer.format_version(), 0U);
ASSERT_EQ(decoded_footer.GetBlockTrailerSize(), 5U);
// Ensure serialized with legacy magic
ASSERT_EQ(
DecodeFixed64(footer.GetSlice().data() + footer.GetSlice().size() - 8),
kLegacyBlockBasedTableMagicNumber);
}
// block based, various checksums, various versions
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
for (auto t : GetSupportedChecksums()) {
for (uint32_t fv = 1; IsSupportedFormatVersion(fv); ++fv) {
FooterBuilder footer;
footer.Build(kBlockBasedTableMagicNumber, fv, footer_offset, t,
meta_index, index);
Footer decoded_footer;
ASSERT_OK(decoded_footer.DecodeFrom(footer.GetSlice(), footer_offset));
ASSERT_EQ(decoded_footer.table_magic_number(),
kBlockBasedTableMagicNumber);
ASSERT_EQ(decoded_footer.checksum_type(), t);
ASSERT_EQ(decoded_footer.metaindex_handle().offset(),
meta_index.offset());
ASSERT_EQ(decoded_footer.metaindex_handle().size(), meta_index.size());
ASSERT_EQ(decoded_footer.index_handle().offset(), index.offset());
ASSERT_EQ(decoded_footer.index_handle().size(), index.size());
ASSERT_EQ(decoded_footer.format_version(), fv);
ASSERT_EQ(decoded_footer.GetBlockTrailerSize(), 5U);
}
}
{
// legacy plain table
FooterBuilder footer;
footer.Build(kPlainTableMagicNumber, /* format_version */ 0, footer_offset,
kNoChecksum, meta_index);
Footer decoded_footer;
ASSERT_OK(decoded_footer.DecodeFrom(footer.GetSlice(), footer_offset));
ASSERT_EQ(decoded_footer.table_magic_number(), kPlainTableMagicNumber);
ASSERT_EQ(decoded_footer.checksum_type(), kCRC32c);
ASSERT_EQ(decoded_footer.metaindex_handle().offset(), meta_index.offset());
ASSERT_EQ(decoded_footer.metaindex_handle().size(), meta_index.size());
ASSERT_EQ(decoded_footer.index_handle().offset(), 0U);
ASSERT_EQ(decoded_footer.index_handle().size(), 0U);
ASSERT_EQ(decoded_footer.format_version(), 0U);
ASSERT_EQ(decoded_footer.GetBlockTrailerSize(), 0U);
// Ensure serialized with legacy magic
ASSERT_EQ(
DecodeFixed64(footer.GetSlice().data() + footer.GetSlice().size() - 8),
kLegacyPlainTableMagicNumber);
}
{
Implement XXH3 block checksum type (#9069) Summary: XXH3 - latest hash function that is extremely fast on large data, easily faster than crc32c on most any x86_64 hardware. In integrating this hash function, I have handled the compression type byte in a non-standard way to avoid using the streaming API (extra data movement and active code size because of hash function complexity). This approach got a thumbs-up from Yann Collet. Existing functionality change: * reject bad ChecksumType in options with InvalidArgument This change split off from https://github.com/facebook/rocksdb/issues/9058 because context-aware checksum is likely to be handled through different configuration than ChecksumType. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9069 Test Plan: tests updated, and substantially expanded. Unit tests now check that we don't accidentally change the values generated by the checksum algorithms ("schema test") and that we properly handle invalid/unrecognized checksum types in options or in file footer. DBTestBase::ChangeOptions (etc.) updated from two to one configuration changing from default CRC32c ChecksumType. The point of this test code is to detect possible interactions among features, and the likelihood of some bad interaction being detected by including configurations other than XXH3 and CRC32c--and then not detected by stress/crash test--is extremely low. Stress/crash test also updated (manual run long enough to see it accepts new checksum type). db_bench also updated for microbenchmarking checksums. ### Performance microbenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) ./db_bench -benchmarks=crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3,crc32c,xxhash,xxhash64,xxh3 crc32c : 0.200 micros/op 5005220 ops/sec; 19551.6 MB/s (4096 per op) xxhash : 0.807 micros/op 1238408 ops/sec; 4837.5 MB/s (4096 per op) xxhash64 : 0.421 micros/op 2376514 ops/sec; 9283.3 MB/s (4096 per op) xxh3 : 0.171 micros/op 5858391 ops/sec; 22884.3 MB/s (4096 per op) crc32c : 0.206 micros/op 4859566 ops/sec; 18982.7 MB/s (4096 per op) xxhash : 0.793 micros/op 1260850 ops/sec; 4925.2 MB/s (4096 per op) xxhash64 : 0.410 micros/op 2439182 ops/sec; 9528.1 MB/s (4096 per op) xxh3 : 0.161 micros/op 6202872 ops/sec; 24230.0 MB/s (4096 per op) crc32c : 0.203 micros/op 4924686 ops/sec; 19237.1 MB/s (4096 per op) xxhash : 0.839 micros/op 1192388 ops/sec; 4657.8 MB/s (4096 per op) xxhash64 : 0.424 micros/op 2357391 ops/sec; 9208.6 MB/s (4096 per op) xxh3 : 0.162 micros/op 6182678 ops/sec; 24151.1 MB/s (4096 per op) As you can see, especially once warmed up, xxh3 is fastest. ### Performance macrobenchmark (PORTABLE=0 DEBUG_LEVEL=0, Broadwell processor) Test for I in `seq 1 50`; do for CHK in 0 1 2 3 4; do TEST_TMPDIR=/dev/shm/rocksdb$CHK ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=$CHK 2>&1 | grep 'micros/op' | tee -a results-$CHK & done; wait; done Results (ops/sec) for FILE in results*; do echo -n "$FILE "; awk '{ s += $5; c++; } END { print 1.0 * s / c; }' < $FILE; done results-0 252118 # kNoChecksum results-1 251588 # kCRC32c results-2 251863 # kxxHash results-3 252016 # kxxHash64 results-4 252038 # kXXH3 Reviewed By: mrambacher Differential Revision: D31905249 Pulled By: pdillinger fbshipit-source-id: cb9b998ebe2523fc7c400eedf62124a78bf4b4d1
2021-10-29 05:13:47 +00:00
// xxhash plain table (not currently used)
FooterBuilder footer;
footer.Build(kPlainTableMagicNumber, /* format_version */ 1, footer_offset,
kxxHash, meta_index);
Footer decoded_footer;
ASSERT_OK(decoded_footer.DecodeFrom(footer.GetSlice(), footer_offset));
ASSERT_EQ(decoded_footer.table_magic_number(), kPlainTableMagicNumber);
ASSERT_EQ(decoded_footer.checksum_type(), kxxHash);
ASSERT_EQ(decoded_footer.metaindex_handle().offset(), meta_index.offset());
ASSERT_EQ(decoded_footer.metaindex_handle().size(), meta_index.size());
ASSERT_EQ(decoded_footer.index_handle().offset(), 0U);
ASSERT_EQ(decoded_footer.index_handle().size(), 0U);
ASSERT_EQ(decoded_footer.format_version(), 1U);
ASSERT_EQ(decoded_footer.GetBlockTrailerSize(), 0U);
}
}
class IndexBlockRestartIntervalTest
: public TableTest,
public ::testing::WithParamInterface<std::pair<int, bool>> {
public:
static std::vector<std::pair<int, bool>> GetRestartValues() {
return {{-1, false}, {0, false}, {1, false}, {8, false},
{16, false}, {32, false}, {-1, true}, {0, true},
{1, true}, {8, true}, {16, true}, {32, true}};
}
};
INSTANTIATE_TEST_CASE_P(
IndexBlockRestartIntervalTest, IndexBlockRestartIntervalTest,
::testing::ValuesIn(IndexBlockRestartIntervalTest::GetRestartValues()));
TEST_P(IndexBlockRestartIntervalTest, IndexBlockRestartInterval) {
const int kKeysInTable = 10000;
const int kKeySize = 100;
const int kValSize = 500;
const int index_block_restart_interval = std::get<0>(GetParam());
const bool value_delta_encoding = std::get<1>(GetParam());
Options options;
BlockBasedTableOptions table_options;
table_options.block_size = 64; // small block size to get big index block
table_options.index_block_restart_interval = index_block_restart_interval;
if (value_delta_encoding) {
table_options.format_version = 4;
} else {
table_options.format_version = 3;
}
options.table_factory.reset(new BlockBasedTableFactory(table_options));
TableConstructor c(BytewiseComparator());
static Random rnd(301);
for (int i = 0; i < kKeysInTable; i++) {
InternalKey k(rnd.RandomString(kKeySize), 0, kTypeValue);
c.Add(k.Encode().ToString(), rnd.RandomString(kValSize));
}
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
std::unique_ptr<InternalKeyComparator> comparator(
new InternalKeyComparator(BytewiseComparator()));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_options, *comparator, &keys,
&kvmap);
auto reader = c.GetTableReader();
ReadOptions read_options;
std::unique_ptr<InternalIterator> db_iter(reader->NewIterator(
read_options, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
// Test point lookup
for (auto& kv : kvmap) {
db_iter->Seek(kv.first);
ASSERT_TRUE(db_iter->Valid());
ASSERT_OK(db_iter->status());
ASSERT_EQ(db_iter->key(), kv.first);
ASSERT_EQ(db_iter->value(), kv.second);
}
// Test iterating
auto kv_iter = kvmap.begin();
for (db_iter->SeekToFirst(); db_iter->Valid(); db_iter->Next()) {
ASSERT_EQ(db_iter->key(), kv_iter->first);
ASSERT_EQ(db_iter->value(), kv_iter->second);
kv_iter++;
}
ASSERT_EQ(kv_iter, kvmap.end());
c.ResetTableReader();
}
class PrefixTest : public testing::Test {
public:
PrefixTest() : testing::Test() {}
~PrefixTest() override {}
};
namespace {
// A simple PrefixExtractor that only works for test PrefixAndWholeKeyTest
class TestPrefixExtractor : public ROCKSDB_NAMESPACE::SliceTransform {
public:
~TestPrefixExtractor() override{};
const char* Name() const override { return "TestPrefixExtractor"; }
ROCKSDB_NAMESPACE::Slice Transform(
const ROCKSDB_NAMESPACE::Slice& src) const override {
assert(IsValid(src));
return ROCKSDB_NAMESPACE::Slice(src.data(), 3);
}
bool InDomain(const ROCKSDB_NAMESPACE::Slice& src) const override {
Fix a bug for SeekForPrev with partitioned filter and prefix (#8137) Summary: According to https://github.com/facebook/rocksdb/issues/5907, each filter partition "should include the bloom of the prefix of the last key in the previous partition" so that SeekForPrev() in prefix mode can return correct result. The prefix of the last key in the previous partition does not necessarily have the same prefix as the first key in the current partition. Regardless of the first key in current partition, the prefix of the last key in the previous partition should be added. The existing code, however, does not follow this. Furthermore, there is another issue: when finishing current filter partition, `FullFilterBlockBuilder::AddPrefix()` is called for the first key in next filter partition, which effectively overwrites `last_prefix_str_` prematurely. Consequently, when the filter block builder proceeds to the next partition, `last_prefix_str_` will be the prefix of its first key, leaving no way of adding the bloom of the prefix of the last key of the previous partition. Prefix extractor is FixedLength.2. ``` [ filter part 1 ] [ filter part 2 ] abc d ``` When SeekForPrev("abcd"), checking the filter partition will land on filter part 2 because "abcd" > "abc" but smaller than "d". If the filter in filter part 2 happens to return false for the test for "ab", then SeekForPrev("abcd") will build incorrect iterator tree in non-total-order mode. Also fix a unit test which starts to fail following this PR. `InDomain` should not fail due to assertion error when checking on an arbitrary key. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8137 Test Plan: ``` make check ``` Without this fix, the following command will fail pretty soon. ``` ./db_stress --acquire_snapshot_one_in=10000 --avoid_flush_during_recovery=0 \ --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 \ --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=17 \ --bottommost_compression_type=disable --cache_index_and_filter_blocks=1 --cache_size=1048576 \ --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \ --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_ttl=0 \ --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 \ --compression_parallel_threads=1 --compression_type=zstd --compression_zstd_max_train_bytes=0 \ --continuous_verification_interval=0 --db=/dev/shm/rocksdb/rocksdb_crashtest_whitebox \ --db_write_buffer_size=8388608 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --enable_blob_files=0 \ --enable_compaction_filter=0 --enable_pipelined_write=1 --file_checksum_impl=big --flush_one_in=1000000 \ --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \ --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --index_type=2 --ingest_external_file_one_in=0 \ --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \ --log2_keys_per_lock=10 --long_running_snapshots=1 --mark_for_compaction_one_file_in=0 \ --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=100000000 --max_key_len=3 \ --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 \ --max_write_buffer_size_to_maintain=8388608 --memtablerep=skip_list --mmap_read=1 --mock_direct_io=False \ --nooverwritepercent=0 --open_files=500000 --ops_per_thread=20000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=1 --partition_pinning=0 --pause_background_one_in=1000000 \ --periodic_compaction_seconds=0 --prefixpercent=5 --progress_reports=0 --read_fault_one_in=0 --read_only=0 \ --readpercent=45 --recycle_log_file_num=0 --reopen=20 --secondary_catch_up_one_in=0 \ --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 \ --sst_file_manager_bytes_per_truncate=0 --subcompactions=2 --sync=0 --sync_fault_injection=False \ --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 \ --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_blob_db=0 --use_block_based_filter=0 \ --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 \ --use_multiget=0 --use_ribbon_filter=0 --use_txn=0 --user_timestamp_size=8 --verify_checksum=1 \ --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --write_buffer_size=4194304 \ --write_dbid_to_manifest=1 --writepercent=35 ``` Reviewed By: pdillinger Differential Revision: D27553054 Pulled By: riversand963 fbshipit-source-id: 60e391e4a2d8d98a9a3172ec5d6176b90ec3de98
2021-04-06 19:12:57 +00:00
return IsValid(src);
}
bool InRange(const ROCKSDB_NAMESPACE::Slice& /*dst*/) const override {
return true;
}
bool IsValid(const ROCKSDB_NAMESPACE::Slice& src) const {
if (src.size() != 4) {
return false;
}
if (src[0] != '[') {
return false;
}
if (src[1] < '0' || src[1] > '9') {
return false;
}
if (src[2] != ']') {
return false;
}
if (src[3] < '0' || src[3] > '9') {
return false;
}
return true;
}
};
} // namespace
TEST_F(PrefixTest, PrefixAndWholeKeyTest) {
ROCKSDB_NAMESPACE::Options options;
options.compaction_style = ROCKSDB_NAMESPACE::kCompactionStyleUniversal;
options.num_levels = 20;
options.create_if_missing = true;
options.optimize_filters_for_hits = false;
options.target_file_size_base = 268435456;
options.prefix_extractor = std::make_shared<TestPrefixExtractor>();
ROCKSDB_NAMESPACE::BlockBasedTableOptions bbto;
bbto.filter_policy.reset(ROCKSDB_NAMESPACE::NewBloomFilterPolicy(10));
bbto.block_size = 262144;
bbto.whole_key_filtering = true;
const std::string kDBPath = test::PerThreadDBPath("table_prefix_test");
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
ASSERT_OK(DestroyDB(kDBPath, options));
ROCKSDB_NAMESPACE::DB* db;
ASSERT_OK(ROCKSDB_NAMESPACE::DB::Open(options, kDBPath, &db));
// Create a bunch of keys with 10 filters.
for (int i = 0; i < 10; i++) {
std::string prefix = "[" + std::to_string(i) + "]";
for (int j = 0; j < 10; j++) {
std::string key = prefix + std::to_string(j);
ASSERT_OK(db->Put(ROCKSDB_NAMESPACE::WriteOptions(), key, "1"));
}
}
// Trigger compaction.
ASSERT_OK(db->CompactRange(CompactRangeOptions(), nullptr, nullptr));
delete db;
// In the second round, turn whole_key_filtering off and expect
// rocksdb still works.
}
/*
* Disable TableWithGlobalSeqno since RocksDB does not store global_seqno in
* the SST file any more. Instead, RocksDB deduces global_seqno from the
* MANIFEST while reading from an SST. Therefore, it's not possible to test the
* functionality of global_seqno in a single, isolated unit test without the
* involvement of Version, VersionSet, etc.
*/
TEST_P(BlockBasedTableTest, DISABLED_TableWithGlobalSeqno) {
BlockBasedTableOptions bbto = GetBlockBasedTableOptions();
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "" /* don't care */, FileOptions()));
Options options;
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
int_tbl_prop_collector_factories.emplace_back(
new SstFileWriterPropertiesCollectorFactory(2 /* version */,
0 /* global_seqno*/));
std::string column_family_name;
std::unique_ptr<TableBuilder> builder(options.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
CompressionOptions(), kUnknownColumnFamily,
column_family_name, -1),
file_writer.get()));
for (char c = 'a'; c <= 'z'; ++c) {
std::string key(8, c);
std::string value = key;
InternalKey ik(key, 0, kTypeValue);
builder->Add(ik.Encode(), value);
}
ASSERT_OK(builder->Finish());
ASSERT_OK(file_writer->Flush());
test::RandomRWStringSink ss_rw(sink);
uint32_t version;
uint64_t global_seqno;
uint64_t global_seqno_offset;
// Helper function to get version, global_seqno, global_seqno_offset
std::function<void()> GetVersionAndGlobalSeqno = [&]() {
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(ss_rw.contents(), 73342, true));
std::unique_ptr<RandomAccessFileReader> file_reader(
new RandomAccessFileReader(std::move(source), ""));
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
std::unique_ptr<TableProperties> props;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
ASSERT_OK(ReadTableProperties(file_reader.get(), ss_rw.contents().size(),
kBlockBasedTableMagicNumber, ioptions,
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
read_options, &props));
UserCollectedProperties user_props = props->user_collected_properties;
version = DecodeFixed32(
user_props[ExternalSstFilePropertyNames::kVersion].c_str());
global_seqno = DecodeFixed64(
user_props[ExternalSstFilePropertyNames::kGlobalSeqno].c_str());
global_seqno_offset = props->external_sst_file_global_seqno_offset;
};
// Helper function to update the value of the global seqno in the file
std::function<void(uint64_t)> SetGlobalSeqno = [&](uint64_t val) {
std::string new_global_seqno;
PutFixed64(&new_global_seqno, val);
ASSERT_OK(ss_rw.Write(global_seqno_offset, new_global_seqno, IOOptions(),
nullptr));
};
// Helper function to get the contents of the table InternalIterator
std::unique_ptr<TableReader> table_reader;
const ReadOptions read_options;
std::function<InternalIterator*()> GetTableInternalIter = [&]() {
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(ss_rw.contents(), 73342, true));
std::unique_ptr<RandomAccessFileReader> file_reader(
new RandomAccessFileReader(std::move(source), ""));
options.table_factory->NewTableReader(
Fast path for detecting unchanged prefix_extractor (#9407) Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
2022-01-21 19:36:36 +00:00
TableReaderOptions(ioptions, moptions.prefix_extractor, EnvOptions(),
ikc),
std::move(file_reader), ss_rw.contents().size(), &table_reader);
return table_reader->NewIterator(
read_options, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized);
};
GetVersionAndGlobalSeqno();
ASSERT_EQ(2u, version);
ASSERT_EQ(0u, global_seqno);
InternalIterator* iter = GetTableInternalIter();
char current_c = 'a';
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
ParsedInternalKey pik;
ASSERT_OK(ParseInternalKey(iter->key(), &pik, true /* log_err_key */));
ASSERT_EQ(pik.type, ValueType::kTypeValue);
ASSERT_EQ(pik.sequence, 0);
ASSERT_EQ(pik.user_key, iter->value());
ASSERT_EQ(pik.user_key.ToString(), std::string(8, current_c));
current_c++;
}
ASSERT_EQ(current_c, 'z' + 1);
delete iter;
// Update global sequence number to 10
SetGlobalSeqno(10);
GetVersionAndGlobalSeqno();
ASSERT_EQ(2u, version);
ASSERT_EQ(10u, global_seqno);
iter = GetTableInternalIter();
current_c = 'a';
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
ParsedInternalKey pik;
ASSERT_OK(ParseInternalKey(iter->key(), &pik, true /* log_err_key */));
ASSERT_EQ(pik.type, ValueType::kTypeValue);
ASSERT_EQ(pik.sequence, 10);
ASSERT_EQ(pik.user_key, iter->value());
ASSERT_EQ(pik.user_key.ToString(), std::string(8, current_c));
current_c++;
}
ASSERT_EQ(current_c, 'z' + 1);
// Verify Seek
for (char c = 'a'; c <= 'z'; c++) {
std::string k = std::string(8, c);
InternalKey ik(k, 10, kValueTypeForSeek);
iter->Seek(ik.Encode());
ASSERT_TRUE(iter->Valid());
ParsedInternalKey pik;
ASSERT_OK(ParseInternalKey(iter->key(), &pik, true /* log_err_key */));
ASSERT_EQ(pik.type, ValueType::kTypeValue);
ASSERT_EQ(pik.sequence, 10);
ASSERT_EQ(pik.user_key.ToString(), k);
ASSERT_EQ(iter->value().ToString(), k);
}
delete iter;
// Update global sequence number to 3
SetGlobalSeqno(3);
GetVersionAndGlobalSeqno();
ASSERT_EQ(2u, version);
ASSERT_EQ(3u, global_seqno);
iter = GetTableInternalIter();
current_c = 'a';
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
ParsedInternalKey pik;
ASSERT_OK(ParseInternalKey(iter->key(), &pik, true /* log_err_key */));
ASSERT_EQ(pik.type, ValueType::kTypeValue);
ASSERT_EQ(pik.sequence, 3);
ASSERT_EQ(pik.user_key, iter->value());
ASSERT_EQ(pik.user_key.ToString(), std::string(8, current_c));
current_c++;
}
ASSERT_EQ(current_c, 'z' + 1);
// Verify Seek
for (char c = 'a'; c <= 'z'; c++) {
std::string k = std::string(8, c);
// seqno=4 is less than 3 so we still should get our key
InternalKey ik(k, 4, kValueTypeForSeek);
iter->Seek(ik.Encode());
ASSERT_TRUE(iter->Valid());
ParsedInternalKey pik;
ASSERT_OK(ParseInternalKey(iter->key(), &pik, true /* log_err_key */));
ASSERT_EQ(pik.type, ValueType::kTypeValue);
ASSERT_EQ(pik.sequence, 3);
ASSERT_EQ(pik.user_key.ToString(), k);
ASSERT_EQ(iter->value().ToString(), k);
}
delete iter;
}
TEST_P(BlockBasedTableTest, BlockAlignTest) {
BlockBasedTableOptions bbto = GetBlockBasedTableOptions();
bbto.block_align = true;
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "" /* don't care */, FileOptions()));
Options options;
options.compression = kNoCompression;
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
std::unique_ptr<TableBuilder> builder(options.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
CompressionOptions(), kUnknownColumnFamily,
column_family_name, -1),
file_writer.get()));
for (int i = 1; i <= 10000; ++i) {
std::ostringstream ostr;
ostr << std::setfill('0') << std::setw(5) << i;
std::string key = ostr.str();
std::string value = "val";
InternalKey ik(key, 0, kTypeValue);
builder->Add(ik.Encode(), value);
}
ASSERT_OK(builder->Finish());
ASSERT_OK(file_writer->Flush());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(sink->contents(), 73342, false));
std::unique_ptr<RandomAccessFileReader> file_reader(
new RandomAccessFileReader(std::move(source), "test"));
// Helper function to get version, global_seqno, global_seqno_offset
std::function<void()> VerifyBlockAlignment = [&]() {
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
std::unique_ptr<TableProperties> props;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
const ReadOptions read_options;
ASSERT_OK(ReadTableProperties(file_reader.get(), sink->contents().size(),
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
kBlockBasedTableMagicNumber, ioptions,
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
read_options, &props));
uint64_t data_block_size = props->data_size / props->num_data_blocks;
ASSERT_EQ(data_block_size, 4096);
ASSERT_EQ(props->data_size, data_block_size * props->num_data_blocks);
};
VerifyBlockAlignment();
// The below block of code verifies that we can read back the keys. Set
// block_align to false when creating the reader to ensure we can flip between
// the two modes without any issues
std::unique_ptr<TableReader> table_reader;
bbto.block_align = false;
Options options2;
options2.table_factory.reset(NewBlockBasedTableFactory(bbto));
ImmutableOptions ioptions2(options2);
const MutableCFOptions moptions2(options2);
ASSERT_OK(ioptions.table_factory->NewTableReader(
Fast path for detecting unchanged prefix_extractor (#9407) Summary: Fixes a major performance regression in 6.26, where extra CPU is spent in SliceTransform::AsString when reads involve a prefix_extractor (Get, MultiGet, Seek). Common case performance is now better than 6.25. This change creates a "fast path" for verifying that the current prefix extractor is unchanged and compatible with what was used to generate a table file. This fast path detects the common case by pointer comparison on the current prefix_extractor and a "known good" prefix extractor (if applicable) that is saved at the time the table reader is opened. The "known good" prefix extractor is saved as another shared_ptr copy (in an existing field, however) to ensure the pointer is not recycled. When the prefix_extractor has changed to a different instance but same compatible configuration (rare, odd), performance is still a regression compared to 6.25, but this is likely acceptable because of the oddity of such a case. The performance of incompatible prefix_extractor is essentially unchanged. Also fixed a minor case (ForwardIterator) where a prefix_extractor could be used via a raw pointer after being freed as a shared_ptr, if replaced via SetOptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407 Test Plan: ## Performance Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12` Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load) v6.26: 4833 vs. 6698 (<- major regression!) v6.27: 4737 vs. 6397 (still) New: 6704 vs. 6461 (better than baseline in common case) Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible) Changed prefix size (no usable filter) in new: 787 vs. 5927 Changed prefix size (no usable filter) in new & baseline: 773 vs. 784 Reviewed By: mrambacher Differential Revision: D33677812 Pulled By: pdillinger fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
2022-01-21 19:36:36 +00:00
TableReaderOptions(ioptions2, moptions2.prefix_extractor, EnvOptions(),
GetPlainInternalComparator(options2.comparator)),
std::move(file_reader), sink->contents().size(), &table_reader));
ReadOptions read_options;
std::unique_ptr<InternalIterator> db_iter(table_reader->NewIterator(
read_options, moptions2.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
int expected_key = 1;
for (db_iter->SeekToFirst(); db_iter->Valid(); db_iter->Next()) {
std::ostringstream ostr;
ostr << std::setfill('0') << std::setw(5) << expected_key++;
std::string key = ostr.str();
std::string value = "val";
ASSERT_OK(db_iter->status());
ASSERT_EQ(ExtractUserKey(db_iter->key()).ToString(), key);
ASSERT_EQ(db_iter->value().ToString(), value);
}
expected_key--;
ASSERT_EQ(expected_key, 10000);
table_reader.reset();
}
TEST_P(BlockBasedTableTest, PropertiesBlockRestartPointTest) {
BlockBasedTableOptions bbto = GetBlockBasedTableOptions();
bbto.block_align = true;
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "" /* don't care */, FileOptions()));
Options options;
options.compression = kNoCompression;
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::string column_family_name;
std::unique_ptr<TableBuilder> builder(options.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kNoCompression,
Add more LSM info to FilterBuildingContext (#8246) Summary: Add `num_levels`, `is_bottommost`, and table file creation `reason` to `FilterBuildingContext`, in anticipation of more powerful Bloom-like filter support. To support this, added `is_bottommost` and `reason` to `TableBuilderOptions`, which allowed removing `reason` parameter from `rocksdb::BuildTable`. I attempted to remove `skip_filters` from `TableBuilderOptions`, because filter construction decisions should arise from options, not one-off parameters. I could not completely remove it because the public API for SstFileWriter takes a `skip_filters` parameter, and translating this into an option change would mean awkwardly replacing the table_factory if it is BlockBasedTableFactory with new filter_policy=nullptr option. I marked this public skip_filters option as deprecated because of this oddity. (skip_filters on the read side probably makes sense.) At least `skip_filters` is now largely hidden for users of `TableBuilderOptions` and is no longer used for implementing the optimize_filters_for_hits option. Bringing the logic for that option closer to handling of FilterBuildingContext makes it more obvious that hese two are using the same notion of "bottommost." (Planned: configuration options for Bloom-like filters that generalize `optimize_filters_for_hits`) Recommended follow-up: Try to get away from "bottommost level" naming of things, which is inaccurate (see VersionStorageInfo::RangeMightExistAfterSortedRun), and move to "bottommost run" or just "bottommost." Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246 Test Plan: extended an existing unit test to exercise and check various filter building contexts. Also, existing tests for optimize_filters_for_hits validate some of the "bottommost" handling, which is now closely connected to FilterBuildingContext::is_bottommost through TableBuilderOptions::is_bottommost Reviewed By: mrambacher Differential Revision: D28099346 Pulled By: pdillinger fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
2021-04-30 20:49:24 +00:00
CompressionOptions(), kUnknownColumnFamily,
column_family_name, -1),
file_writer.get()));
for (int i = 1; i <= 10000; ++i) {
std::ostringstream ostr;
ostr << std::setfill('0') << std::setw(5) << i;
std::string key = ostr.str();
std::string value = "val";
InternalKey ik(key, 0, kTypeValue);
builder->Add(ik.Encode(), value);
}
ASSERT_OK(builder->Finish());
ASSERT_OK(file_writer->Flush());
std::unique_ptr<FSRandomAccessFile> source(
new test::StringSource(sink->contents(), 73342, true));
std::unique_ptr<RandomAccessFileReader> file_reader(
new RandomAccessFileReader(std::move(source), "test"));
{
RandomAccessFileReader* file = file_reader.get();
uint64_t file_size = sink->contents().size();
Footer footer;
IOOptions opts;
ASSERT_OK(ReadFooterFromFile(opts, file, *FileSystem::Default(),
nullptr /* prefetch_buffer */, file_size,
&footer, kBlockBasedTableMagicNumber));
auto BlockFetchHelper = [&](const BlockHandle& handle, BlockType block_type,
BlockContents* contents) {
ReadOptions read_options;
read_options.verify_checksums = false;
PersistentCacheOptions cache_options;
BlockFetcher block_fetcher(
file, nullptr /* prefetch_buffer */, footer, read_options, handle,
contents, ioptions, false /* decompress */,
false /*maybe_compressed*/, block_type,
UncompressionDict::GetEmptyDict(), cache_options);
ASSERT_OK(block_fetcher.ReadBlockContents());
};
// -- Read metaindex block
auto metaindex_handle = footer.metaindex_handle();
BlockContents metaindex_contents;
BlockFetchHelper(metaindex_handle, BlockType::kMetaIndex,
&metaindex_contents);
Block metaindex_block(std::move(metaindex_contents));
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
std::unique_ptr<InternalIterator> meta_iter(metaindex_block.NewDataIterator(
Separate internal and user key comparators in `BlockIter` (#6944) Summary: Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944 Test Plan: benchmark setup -- single file DBs, in-memory, no compression. "normal_db" created by regular flush; "ingestion_db" created by ingesting a file. Both DBs have same contents. ``` $ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000 $ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}') $ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ ``` benchmark run command: ``` $ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false ``` results: perf improved marginally for ingestion_db and did not change significantly for normal_db: SEEK_NEXT | DB | code | ops/sec | % change -- | -- | -- | -- | -- 0 | normal_db | master | 350880 |   0 | normal_db | PR6944 | 351040 | 0.0 0 | ingestion_db | master | 343255 |   0 | ingestion_db | PR6944 | 349424 | 1.8 10 | normal_db | master | 218711 |   10 | normal_db | PR6944 | 217892 | -0.4 10 | ingestion_db | master | 220334 |   10 | ingestion_db | PR6944 | 226437 | 2.8 Reviewed By: pdillinger Differential Revision: D21924676 Pulled By: ajkr fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
2020-07-08 00:25:08 +00:00
BytewiseComparator(), kDisableGlobalSequenceNumber));
// -- Read properties block
BlockHandle properties_handle;
ASSERT_OK(FindOptionalMetaBlock(meta_iter.get(), kPropertiesBlockName,
Improve / clean up meta block code & integrity (#9163) Summary: * Checksums are now checked on meta blocks unless specifically suppressed or not applicable (e.g. plain table). (Was other way around.) This means a number of cases that were not checking checksums now are, including direct read TableProperties in Version::GetTableProperties (fixed in meta_blocks ReadTableProperties), reading any block from PersistentCache (fixed in BlockFetcher), read TableProperties in SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open, maybe more. * For that to work, I moved the global_seqno+TableProperties checksum logic to the shared table/ code, because that is used by many utilies such as SstFileDumper. * Also for that to work, we have to know when we're dealing with a block that has a checksum (trailer), so added that capability to Footer based on magic number, and from there BlockFetcher. * Knowledge of trailer presence has also fixed a problem where other table formats were reading blocks including bytes for a non-existant trailer--and awkwardly kind-of not using them, e.g. no shared code checking checksums. (BlockFetcher compression type was populated incorrectly.) Now we only read what is needed. * Minimized code duplication and differing/incompatible/awkward abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block without parsing block handle) * Moved some meta block handling code from table_properties*.* * Moved some code specific to block-based table from shared table/ code to BlockBasedTable class. The checksum stuff means we can't completely separate it, but things that don't need to be in shared table/ code should not be. * Use unique_ptr rather than raw ptr in more places. (Note: you can std::move from unique_ptr to shared_ptr.) Without enhancements to GetPropertiesOfAllTablesTest (see below), net reduction of roughly 100 lines of code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163 Test Plan: existing tests and * Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that checksums are now checked on direct read of table properties by TableCache (new test would fail before this change) * Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test putting table properties under old meta name * Also generally enhanced that same test to actually test what it was supposed to be testing already, by kicking things out of table cache when we don't want them there. Reviewed By: ajkr, mrambacher Differential Revision: D32514757 Pulled By: pdillinger fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
2021-11-18 19:42:12 +00:00
&properties_handle));
ASSERT_FALSE(properties_handle.IsNull());
BlockContents properties_contents;
BlockFetchHelper(properties_handle, BlockType::kProperties,
&properties_contents);
Block properties_block(std::move(properties_contents));
ASSERT_EQ(properties_block.NumRestarts(), 1u);
}
}
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
TEST_P(BlockBasedTableTest, CompressionRatioThreshold) {
for (CompressionType type : GetSupportedCompressions()) {
if (type == kNoCompression) {
continue;
}
if (type == kBZip2Compression) {
// Weird behavior in this test
continue;
}
SCOPED_TRACE("Compression type: " + std::to_string(type));
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
Options options;
options.compression = type;
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
int len = 10000;
Random rnd(301);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
// Test the max_compressed_bytes_per_kb option
for (int threshold : {0, 1, 100, 400, 600, 900, 1024}) {
SCOPED_TRACE("threshold=" + std::to_string(threshold));
options.compression_opts.max_compressed_bytes_per_kb = threshold;
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
for (double compressible_to : {0.25, 0.75}) {
SCOPED_TRACE("compressible_to=" + std::to_string(compressible_to));
TableConstructor c(BytewiseComparator(),
true /* convert_to_internal_key_ */);
std::string buf;
c.Add("x", test::CompressibleString(&rnd, compressible_to, len, &buf));
// write an SST file
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
size_t table_file_size = c.TEST_GetSink()->contents().size();
size_t approx_sst_overhead = 1000;
if (compressible_to < threshold / 1024.0) {
// Should be compressed (substantial variance depending on algorithm)
EXPECT_NEAR2(len * compressible_to + approx_sst_overhead,
table_file_size, len / 8);
} else {
// Should not be compressed
EXPECT_NEAR2(len + approx_sst_overhead, table_file_size, len / 10);
}
Changes and enhancements to compression stats, thresholds (#11388) Summary: ## Option API updates * Add new CompressionOptions::max_compressed_bytes_per_kb, which corresponds to 1024.0 / min allowable compression ratio. This avoids the hard-coded minimum ratio of 8/7. * Remove unnecessary constructor for CompressionOptions. * Document undocumented CompressionOptions. Use idiom for default values shown clearly in one place (not precariously repeated). ## Stat API updates * Deprecate the BYTES_COMPRESSED, BYTES_DECOMPRESSED histograms. Histograms incur substantial extra space & time costs compared to tickers, and the distribution of uncompressed data block sizes tends to be uninteresting. If we're interested in that distribution, I don't see why it should be limited to blocks stored as compressed. * Deprecate the NUMBER_BLOCK_NOT_COMPRESSED ticker, because the name is very confusing. * New or existing tickers relevant to compression: * BYTES_COMPRESSED_FROM * BYTES_COMPRESSED_TO * BYTES_COMPRESSION_BYPASSED * BYTES_COMPRESSION_REJECTED * COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES (both existing) * NUMBER_BLOCK_COMPRESSED (existing) * NUMBER_BLOCK_COMPRESSION_BYPASSED * NUMBER_BLOCK_COMPRESSION_REJECTED * BYTES_DECOMPRESSED_FROM * BYTES_DECOMPRESSED_TO We can compute a number of things with these stats: * "Successful" compression ratio: BYTES_COMPRESSED_FROM / BYTES_COMPRESSED_TO * Compression ratio of data on which compression was attempted: (BYTES_COMPRESSED_FROM + BYTES_COMPRESSION_REJECTED) / (BYTES_COMPRESSED_TO + BYTES_COMPRESSION_REJECTED) * Compression ratio of data that could be eligible for compression: (BYTES_COMPRESSED_FROM + X) / (BYTES_COMPRESSED_TO + X) where X = BYTES_COMPRESSION_REJECTED + NUMBER_BLOCK_COMPRESSION_REJECTED * Overall SST compression ratio (compression disabled vs. actual): (Y - BYTES_COMPRESSED_TO + BYTES_COMPRESSED_FROM) / Y where Y = COMPACT_WRITE_BYTES + FLUSH_WRITE_BYTES Keeping _REJECTED separate from _BYPASSED helps us to understand "wasted" CPU time in compression. ## BlockBasedTableBuilder Various small refactorings, optimizations, and name clean-ups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11388 Test Plan: unit tests added * `options_settable_test.cc`: use non-deprecated idiom for configuring CompressionOptions from string. The old idiom is tested elsewhere and does not need to be updated to support the new field. Reviewed By: ajkr Differential Revision: D45128202 Pulled By: pdillinger fbshipit-source-id: 5a652bf5c022b7ec340cf79018cccf0686962803
2023-04-22 04:57:40 +00:00
}
}
}
}
TEST_P(BlockBasedTableTest, PropertiesMetaBlockLast) {
// The properties meta-block should come at the end since we always need to
// read it when opening a file, unlike index/filter/other meta-blocks, which
// are sometimes read depending on the user's configuration. This ordering
// allows us to do a small readahead on the end of the file to read properties
// and meta-index blocks with one I/O.
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("a1", "val1");
c.Add("b2", "val2");
c.Add("c3", "val3");
c.Add("d4", "val4");
c.Add("e5", "val5");
c.Add("f6", "val6");
c.Add("g7", "val7");
c.Add("h8", "val8");
c.Add("j9", "val9");
// write an SST file
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.filter_policy.reset(NewBloomFilterPolicy(
8 /* bits_per_key */, false /* use_block_based_filter */));
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
// get file reader
test::StringSink* table_sink = c.TEST_GetSink();
std::unique_ptr<FSRandomAccessFile> source(new test::StringSource(
table_sink->contents(), 0 /* unique_id */, false /* allow_mmap_reads */));
std::unique_ptr<RandomAccessFileReader> table_reader(
new RandomAccessFileReader(std::move(source), "test"));
size_t table_size = table_sink->contents().size();
// read footer
Footer footer;
IOOptions opts;
ASSERT_OK(ReadFooterFromFile(opts, table_reader.get(), *FileSystem::Default(),
nullptr /* prefetch_buffer */, table_size,
&footer, kBlockBasedTableMagicNumber));
// read metaindex
auto metaindex_handle = footer.metaindex_handle();
BlockContents metaindex_contents;
PersistentCacheOptions pcache_opts;
BlockFetcher block_fetcher(
table_reader.get(), nullptr /* prefetch_buffer */, footer, ReadOptions(),
metaindex_handle, &metaindex_contents, ioptions, false /* decompress */,
false /*maybe_compressed*/, BlockType::kMetaIndex,
UncompressionDict::GetEmptyDict(), pcache_opts,
nullptr /*memory_allocator*/);
ASSERT_OK(block_fetcher.ReadBlockContents());
Block metaindex_block(std::move(metaindex_contents));
// verify properties block comes last
std::unique_ptr<InternalIterator> metaindex_iter{
metaindex_block.NewMetaIterator()};
uint64_t max_offset = 0;
std::string key_at_max_offset;
for (metaindex_iter->SeekToFirst(); metaindex_iter->Valid();
metaindex_iter->Next()) {
BlockHandle handle;
Slice value = metaindex_iter->value();
ASSERT_OK(handle.DecodeFrom(&value));
if (handle.offset() > max_offset) {
max_offset = handle.offset();
key_at_max_offset = metaindex_iter->key().ToString();
}
}
ASSERT_EQ(kPropertiesBlockName, key_at_max_offset);
// index handle is stored in footer rather than metaindex block, so need
// separate logic to verify it comes before properties block.
ASSERT_GT(max_offset, footer.index_handle().offset());
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, SeekMetaBlocks) {
TableConstructor c(BytewiseComparator(), true /* convert_to_internal_key_ */);
c.Add("foo_a1", "val1");
c.Add("foo_b2", "val2");
c.Add("foo_c3", "val3");
c.Add("foo_d4", "val4");
c.Add("foo_e5", "val5");
c.Add("foo_f6", "val6");
c.Add("foo_g7", "val7");
c.Add("foo_h8", "val8");
c.Add("foo_j9", "val9");
// write an SST file
Options options;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.index_type = BlockBasedTableOptions::kHashSearch;
table_options.filter_policy.reset(NewBloomFilterPolicy(
8 /* bits_per_key */, false /* use_block_based_filter */));
options.prefix_extractor.reset(NewFixedPrefixTransform(4));
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
c.Finish(options, ioptions, moptions, table_options,
GetPlainInternalComparator(options.comparator), &keys, &kvmap);
// get file reader
test::StringSink* table_sink = c.TEST_GetSink();
std::unique_ptr<FSRandomAccessFile> source(new test::StringSource(
table_sink->contents(), 0 /* unique_id */, false /* allow_mmap_reads */));
std::unique_ptr<RandomAccessFileReader> table_reader(
new RandomAccessFileReader(std::move(source), "test"));
size_t table_size = table_sink->contents().size();
// read footer
Footer footer;
IOOptions opts;
ASSERT_OK(ReadFooterFromFile(opts, table_reader.get(), *FileSystem::Default(),
nullptr /* prefetch_buffer */, table_size,
&footer, kBlockBasedTableMagicNumber));
// read metaindex
auto metaindex_handle = footer.metaindex_handle();
BlockContents metaindex_contents;
PersistentCacheOptions pcache_opts;
BlockFetcher block_fetcher(
table_reader.get(), nullptr /* prefetch_buffer */, footer, ReadOptions(),
metaindex_handle, &metaindex_contents, ioptions, false /* decompress */,
false /*maybe_compressed*/, BlockType::kMetaIndex,
UncompressionDict::GetEmptyDict(), pcache_opts,
nullptr /*memory_allocator*/);
ASSERT_OK(block_fetcher.ReadBlockContents());
Block metaindex_block(std::move(metaindex_contents));
// verify properties block comes last
std::unique_ptr<MetaBlockIter> metaindex_iter(
metaindex_block.NewMetaIterator());
bool has_hash_prefixes = false;
bool has_hash_metadata = false;
for (metaindex_iter->SeekToFirst(); metaindex_iter->Valid();
metaindex_iter->Next()) {
if (metaindex_iter->key().ToString() == kHashIndexPrefixesBlock) {
has_hash_prefixes = true;
} else if (metaindex_iter->key().ToString() ==
kHashIndexPrefixesMetadataBlock) {
has_hash_metadata = true;
}
}
if (has_hash_metadata) {
metaindex_iter->Seek(kHashIndexPrefixesMetadataBlock);
ASSERT_TRUE(metaindex_iter->Valid());
ASSERT_EQ(kHashIndexPrefixesMetadataBlock,
metaindex_iter->key().ToString());
}
if (has_hash_prefixes) {
metaindex_iter->Seek(kHashIndexPrefixesBlock);
ASSERT_TRUE(metaindex_iter->Valid());
ASSERT_EQ(kHashIndexPrefixesBlock, metaindex_iter->key().ToString());
}
c.ResetTableReader();
}
TEST_P(BlockBasedTableTest, BadOptions) {
ROCKSDB_NAMESPACE::Options options;
options.compression = kNoCompression;
BlockBasedTableOptions bbto = GetBlockBasedTableOptions();
bbto.block_size = 4000;
bbto.block_align = true;
const std::string kDBPath =
test::PerThreadDBPath("block_based_table_bad_options_test");
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
ASSERT_OK(DestroyDB(kDBPath, options));
ROCKSDB_NAMESPACE::DB* db;
ASSERT_NOK(ROCKSDB_NAMESPACE::DB::Open(options, kDBPath, &db));
bbto.block_size = 4096;
options.compression = kSnappyCompression;
options.table_factory.reset(NewBlockBasedTableFactory(bbto));
ASSERT_NOK(ROCKSDB_NAMESPACE::DB::Open(options, kDBPath, &db));
}
TEST_F(BBTTailPrefetchTest, TestTailPrefetchStats) {
TailPrefetchStats tpstats;
ASSERT_EQ(0, tpstats.GetSuggestedPrefetchSize());
tpstats.RecordEffectiveSize(size_t{1000});
tpstats.RecordEffectiveSize(size_t{1005});
tpstats.RecordEffectiveSize(size_t{1002});
ASSERT_EQ(1005, tpstats.GetSuggestedPrefetchSize());
// One single super large value shouldn't influence much
tpstats.RecordEffectiveSize(size_t{1002000});
tpstats.RecordEffectiveSize(size_t{999});
ASSERT_LE(1005, tpstats.GetSuggestedPrefetchSize());
ASSERT_GT(1200, tpstats.GetSuggestedPrefetchSize());
// Only history of 32 is kept
for (int i = 0; i < 32; i++) {
tpstats.RecordEffectiveSize(size_t{100});
}
ASSERT_EQ(100, tpstats.GetSuggestedPrefetchSize());
// 16 large values and 16 small values. The result should be closer
// to the small value as the algorithm.
for (int i = 0; i < 16; i++) {
tpstats.RecordEffectiveSize(size_t{1000});
}
tpstats.RecordEffectiveSize(size_t{10});
tpstats.RecordEffectiveSize(size_t{20});
for (int i = 0; i < 6; i++) {
tpstats.RecordEffectiveSize(size_t{100});
}
ASSERT_LE(80, tpstats.GetSuggestedPrefetchSize());
ASSERT_GT(200, tpstats.GetSuggestedPrefetchSize());
}
TEST_F(BBTTailPrefetchTest, FilePrefetchBufferMinOffset) {
TailPrefetchStats tpstats;
FilePrefetchBuffer buffer(0 /* readahead_size */, 0 /* max_readahead_size */,
false /* enable */, true /* track_min_offset */);
IOOptions opts;
buffer.TryReadFromCache(opts, nullptr /* reader */, 500 /* offset */,
10 /* n */, nullptr /* result */,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
nullptr /* status */,
Env::IO_TOTAL /* rate_limiter_priority */);
buffer.TryReadFromCache(opts, nullptr /* reader */, 480 /* offset */,
10 /* n */, nullptr /* result */,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
nullptr /* status */,
Env::IO_TOTAL /* rate_limiter_priority */);
buffer.TryReadFromCache(opts, nullptr /* reader */, 490 /* offset */,
10 /* n */, nullptr /* result */,
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
nullptr /* status */,
Env::IO_TOTAL /* rate_limiter_priority */);
ASSERT_EQ(480, buffer.min_offset_read());
}
TEST_P(BlockBasedTableTest, DataBlockHashIndex) {
const int kNumKeys = 500;
const int kKeySize = 8;
const int kValSize = 40;
BlockBasedTableOptions table_options = GetBlockBasedTableOptions();
table_options.data_block_index_type =
BlockBasedTableOptions::kDataBlockBinaryAndHash;
Options options;
options.comparator = BytewiseComparator();
options.table_factory.reset(new BlockBasedTableFactory(table_options));
TableConstructor c(options.comparator);
static Random rnd(1048);
for (int i = 0; i < kNumKeys; i++) {
// padding one "0" to mark existent keys.
std::string random_key(rnd.RandomString(kKeySize - 1) + "1");
InternalKey k(random_key, 0, kTypeValue);
c.Add(k.Encode().ToString(), rnd.RandomString(kValSize));
}
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
const InternalKeyComparator internal_comparator(options.comparator);
c.Finish(options, ioptions, moptions, table_options, internal_comparator,
&keys, &kvmap);
auto reader = c.GetTableReader();
std::unique_ptr<InternalIterator> seek_iter;
ReadOptions read_options;
seek_iter.reset(reader->NewIterator(
read_options, moptions.prefix_extractor.get(), /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized));
for (int i = 0; i < 2; ++i) {
ReadOptions ro;
// for every kv, we seek using two method: Get() and Seek()
// Get() will use the SuffixIndexHash in Block. For non-existent key it
// will invalidate the iterator
// Seek() will use the default BinarySeek() in Block. So for non-existent
// key it will land at the closest key that is large than target.
// Search for existent keys
for (auto& kv : kvmap) {
if (i == 0) {
// Search using Seek()
seek_iter->Seek(kv.first);
ASSERT_OK(seek_iter->status());
ASSERT_TRUE(seek_iter->Valid());
ASSERT_EQ(seek_iter->key(), kv.first);
ASSERT_EQ(seek_iter->value(), kv.second);
} else {
// Search using Get()
PinnableSlice value;
std::string user_key = ExtractUserKey(kv.first).ToString();
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, user_key, &value, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
ASSERT_OK(reader->Get(ro, kv.first, &get_context,
moptions.prefix_extractor.get()));
ASSERT_EQ(get_context.State(), GetContext::kFound);
ASSERT_EQ(value, Slice(kv.second));
value.Reset();
}
}
// Search for non-existent keys
for (auto& kv : kvmap) {
std::string user_key = ExtractUserKey(kv.first).ToString();
user_key.back() = '0'; // make it non-existent key
InternalKey internal_key(user_key, 0, kTypeValue);
std::string encoded_key = internal_key.Encode().ToString();
if (i == 0) { // Search using Seek()
seek_iter->Seek(encoded_key);
ASSERT_OK(seek_iter->status());
if (seek_iter->Valid()) {
ASSERT_TRUE(BytewiseComparator()->Compare(
user_key, ExtractUserKey(seek_iter->key())) < 0);
}
} else { // Search using Get()
PinnableSlice value;
GetContext get_context(options.comparator, nullptr, nullptr, nullptr,
GetContext::kNotFound, user_key, &value, nullptr,
Add support for wide-column point lookups (#10540) Summary: The patch adds a new API `GetEntity` that can be used to perform wide-column point lookups. It also extends the `Get` code path and the `MemTable` / `MemTableList` and `Version` / `GetContext` logic accordingly so that wide-column entities can be served from both memtables and SSTs. If the result of a lookup is a wide-column entity (`kTypeWideColumnEntity`), it is passed to the application in deserialized form; if it is a plain old key-value (`kTypeValue`), it is presented as a wide-column entity with a single default (anonymous) column. (In contrast, regular `Get` returns plain old key-values as-is, and returns the value of the default column for wide-column entities, see https://github.com/facebook/rocksdb/issues/10483 .) The result of `GetEntity` is a self-contained `PinnableWideColumns` object. `PinnableWideColumns` contains a `PinnableSlice`, which either stores the underlying data in its own buffer or holds on to a cache handle. It also contains a `WideColumns` instance, which indexes the contents of the `PinnableSlice`, so applications can access the values of columns efficiently. There are several pieces of functionality which are currently not supported for wide-column entities: there is currently no `MultiGetEntity` or wide-column iterator; also, `Merge` and `GetMergeOperands` are not supported, and there is no `GetEntity` implementation for read-only and secondary instances. We plan to implement these in future PRs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10540 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D38847474 Pulled By: ltamasi fbshipit-source-id: 42311a34ccdfe88b3775e847a5e2a5296e002b5b
2022-08-19 18:51:12 +00:00
nullptr, nullptr, true, nullptr, nullptr);
ASSERT_OK(reader->Get(ro, encoded_key, &get_context,
moptions.prefix_extractor.get()));
ASSERT_EQ(get_context.State(), GetContext::kNotFound);
value.Reset();
}
}
}
}
// BlockBasedTableIterator should invalidate itself and return
// OutOfBound()=true immediately after Seek(), to allow LevelIterator
// filter out corresponding level.
TEST_P(BlockBasedTableTest, OutOfBoundOnSeek) {
TableConstructor c(BytewiseComparator(), true /*convert_to_internal_key*/);
c.Add("foo", "v1");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
BlockBasedTableOptions table_opt(GetBlockBasedTableOptions());
options.table_factory.reset(NewBlockBasedTableFactory(table_opt));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_opt,
GetPlainInternalComparator(BytewiseComparator()), &keys, &kvmap);
auto* reader = c.GetTableReader();
ReadOptions read_opt;
std::string upper_bound = "bar";
Slice upper_bound_slice(upper_bound);
read_opt.iterate_upper_bound = &upper_bound_slice;
std::unique_ptr<InternalIterator> iter;
iter.reset(new KeyConvertingIterator(reader->NewIterator(
read_opt, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized)));
iter->SeekToFirst();
ASSERT_FALSE(iter->Valid());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->UpperBoundCheckResult() == IterBoundCheck::kOutOfBound);
iter.reset(new KeyConvertingIterator(reader->NewIterator(
read_opt, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized)));
iter->Seek("foo");
ASSERT_FALSE(iter->Valid());
ASSERT_OK(iter->status());
ASSERT_TRUE(iter->UpperBoundCheckResult() == IterBoundCheck::kOutOfBound);
}
// BlockBasedTableIterator should invalidate itself and return
// OutOfBound()=true after Next(), if it finds current index key is no smaller
// than upper bound, unless it is pointing to the last data block.
TEST_P(BlockBasedTableTest, OutOfBoundOnNext) {
TableConstructor c(BytewiseComparator(), true /*convert_to_internal_key*/);
c.Add("bar", "v");
c.Add("foo", "v");
std::vector<std::string> keys;
stl_wrappers::KVMap kvmap;
Options options;
BlockBasedTableOptions table_opt(GetBlockBasedTableOptions());
table_opt.flush_block_policy_factory =
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
options.table_factory.reset(NewBlockBasedTableFactory(table_opt));
const ImmutableOptions ioptions(options);
const MutableCFOptions moptions(options);
c.Finish(options, ioptions, moptions, table_opt,
GetPlainInternalComparator(BytewiseComparator()), &keys, &kvmap);
auto* reader = c.GetTableReader();
ReadOptions read_opt;
std::string ub1 = "bar_after";
Slice ub_slice1(ub1);
read_opt.iterate_upper_bound = &ub_slice1;
std::unique_ptr<InternalIterator> iter;
iter.reset(new KeyConvertingIterator(reader->NewIterator(
read_opt, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized)));
iter->Seek("bar");
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("bar", iter->key());
iter->Next();
ASSERT_FALSE(iter->Valid());
ASSERT_TRUE(iter->UpperBoundCheckResult() == IterBoundCheck::kOutOfBound);
std::string ub2 = "foo_after";
Slice ub_slice2(ub2);
read_opt.iterate_upper_bound = &ub_slice2;
iter.reset(new KeyConvertingIterator(reader->NewIterator(
read_opt, /*prefix_extractor=*/nullptr, /*arena=*/nullptr,
/*skip_filters=*/false, TableReaderCaller::kUncategorized)));
iter->Seek("foo");
ASSERT_TRUE(iter->Valid());
ASSERT_EQ("foo", iter->key());
iter->Next();
ASSERT_FALSE(iter->Valid());
ASSERT_FALSE(iter->UpperBoundCheckResult() == IterBoundCheck::kOutOfBound);
}
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
class ChargeCompressionDictionaryBuildingBufferTest
: public BlockBasedTableTestBase {};
TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic) {
constexpr std::size_t kSizeDummyEntry = 256 * 1024;
constexpr std::size_t kMetaDataChargeOverhead = 10000;
constexpr std::size_t kCacheCapacity = 8 * 1024 * 1024;
constexpr std::size_t kMaxDictBytes = 1024;
constexpr std::size_t kMaxDictBufferBytes = 1024;
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
for (CacheEntryRoleOptions::Decision
charge_compression_dictionary_building_buffer :
{CacheEntryRoleOptions::Decision::kEnabled,
CacheEntryRoleOptions::Decision::kDisabled}) {
BlockBasedTableOptions table_options;
LRUCacheOptions lo;
lo.capacity = kCacheCapacity;
lo.num_shard_bits = 0; // 2^0 shard
lo.strict_capacity_limit = true;
std::shared_ptr<Cache> cache(NewLRUCache(lo));
table_options.block_cache = cache;
table_options.flush_block_policy_factory =
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
table_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kCompressionDictionaryBuildingBuffer,
{/*.charged = */ charge_compression_dictionary_building_buffer}});
Options options;
options.compression = kSnappyCompression;
options.compression_opts.max_dict_bytes = kMaxDictBytes;
options.compression_opts.max_dict_buffer_bytes = kMaxDictBufferBytes;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "test_file_name", FileOptions()));
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
std::unique_ptr<TableBuilder> builder(
options.table_factory->NewTableBuilder(
TableBuilderOptions(
ioptions, moptions, ikc, &int_tbl_prop_collector_factories,
kSnappyCompression, options.compression_opts,
kUnknownColumnFamily, "test_cf", -1 /* level */),
file_writer.get()));
std::string key1 = "key1";
std::string value1 = "val1";
InternalKey ik1(key1, 0 /* sequnce number */, kTypeValue);
// Adding the first key won't trigger a flush by FlushBlockEveryKeyPolicy
// therefore won't trigger any data block's buffering
builder->Add(ik1.Encode(), value1);
ASSERT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
std::string key2 = "key2";
std::string value2 = "val2";
InternalKey ik2(key2, 1 /* sequnce number */, kTypeValue);
// Adding the second key will trigger a flush of the last data block (the
// one containing key1 and value1) by FlushBlockEveryKeyPolicy and hence
// trigger buffering of that data block.
builder->Add(ik2.Encode(), value2);
// Cache charging will increase for last buffered data block (the one
// containing key1 and value1) since the buffer limit is not exceeded after
// that buffering and the cache will not be full after this reservation
if (charge_compression_dictionary_building_buffer ==
CacheEntryRoleOptions::Decision::kEnabled) {
EXPECT_GE(cache->GetPinnedUsage(), 1 * kSizeDummyEntry);
EXPECT_LT(cache->GetPinnedUsage(),
1 * kSizeDummyEntry + kMetaDataChargeOverhead);
} else {
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
}
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
ASSERT_OK(builder->Finish());
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
}
}
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
TEST_F(ChargeCompressionDictionaryBuildingBufferTest,
BasicWithBufferLimitExceed) {
constexpr std::size_t kSizeDummyEntry = 256 * 1024;
constexpr std::size_t kMetaDataChargeOverhead = 10000;
constexpr std::size_t kCacheCapacity = 8 * 1024 * 1024;
constexpr std::size_t kMaxDictBytes = 1024;
constexpr std::size_t kMaxDictBufferBytes = 2 * kSizeDummyEntry;
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// `CacheEntryRoleOptions::charged` is enabled by default for
// CacheEntryRole::kCompressionDictionaryBuildingBuffer
BlockBasedTableOptions table_options;
LRUCacheOptions lo;
lo.capacity = kCacheCapacity;
lo.num_shard_bits = 0; // 2^0 shard
lo.strict_capacity_limit = true;
std::shared_ptr<Cache> cache(NewLRUCache(lo));
table_options.block_cache = cache;
table_options.flush_block_policy_factory =
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
Options options;
options.compression = kSnappyCompression;
options.compression_opts.max_dict_bytes = kMaxDictBytes;
options.compression_opts.max_dict_buffer_bytes = kMaxDictBufferBytes;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "test_file_name", FileOptions()));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::unique_ptr<TableBuilder> builder(options.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kSnappyCompression,
options.compression_opts, kUnknownColumnFamily,
"test_cf", -1 /* level */),
file_writer.get()));
std::string key1 = "key1";
std::string value1(kSizeDummyEntry, '0');
InternalKey ik1(key1, 0 /* sequnce number */, kTypeValue);
// Adding the first key won't trigger a flush by FlushBlockEveryKeyPolicy
// therefore won't trigger any data block's buffering
builder->Add(ik1.Encode(), value1);
ASSERT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
std::string key2 = "key2";
std::string value2(kSizeDummyEntry, '0');
InternalKey ik2(key2, 1 /* sequnce number */, kTypeValue);
// Adding the second key will trigger a flush of the last data block (the one
// containing key1 and value1) by FlushBlockEveryKeyPolicy and hence trigger
// buffering of the last data block.
builder->Add(ik2.Encode(), value2);
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// Cache charging will increase for last buffered data block (the one
// containing key1 and value1) since the buffer limit is not exceeded after
// the buffering and the cache will not be full after this reservation
EXPECT_GE(cache->GetPinnedUsage(), 2 * kSizeDummyEntry);
EXPECT_LT(cache->GetPinnedUsage(),
2 * kSizeDummyEntry + kMetaDataChargeOverhead);
std::string key3 = "key3";
std::string value3 = "val3";
InternalKey ik3(key3, 2 /* sequnce number */, kTypeValue);
// Adding the third key will trigger a flush of the last data block (the one
// containing key2 and value2) by FlushBlockEveryKeyPolicy and hence trigger
// buffering of the last data block.
builder->Add(ik3.Encode(), value3);
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// Cache charging will decrease since the buffer limit is now exceeded
// after the last buffering and EnterUnbuffered() is triggered
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
ASSERT_OK(builder->Finish());
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
}
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
TEST_F(ChargeCompressionDictionaryBuildingBufferTest, BasicWithCacheFull) {
constexpr std::size_t kSizeDummyEntry = 256 * 1024;
constexpr std::size_t kMetaDataChargeOverhead = 10000;
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// A small kCacheCapacity is chosen so that increase cache charging for
// buffering two data blocks, each containing key1/value1, key2/a big
// value2, will cause cache full
constexpr std::size_t kCacheCapacity =
1 * kSizeDummyEntry + kSizeDummyEntry / 2;
constexpr std::size_t kMaxDictBytes = 1024;
// A big kMaxDictBufferBytes is chosen so that adding a big key value pair
// (key2, value2) won't exceed the buffer limit
constexpr std::size_t kMaxDictBufferBytes = 1024 * 1024 * 1024;
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// `CacheEntryRoleOptions::charged` is enabled by default for
// CacheEntryRole::kCompressionDictionaryBuildingBuffer
BlockBasedTableOptions table_options;
LRUCacheOptions lo;
lo.capacity = kCacheCapacity;
lo.num_shard_bits = 0; // 2^0 shard
lo.strict_capacity_limit = true;
std::shared_ptr<Cache> cache(NewLRUCache(lo));
table_options.block_cache = cache;
table_options.flush_block_policy_factory =
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
Options options;
options.compression = kSnappyCompression;
options.compression_opts.max_dict_bytes = kMaxDictBytes;
options.compression_opts.max_dict_buffer_bytes = kMaxDictBufferBytes;
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
test::StringSink* sink = new test::StringSink();
std::unique_ptr<FSWritableFile> holder(sink);
std::unique_ptr<WritableFileWriter> file_writer(new WritableFileWriter(
std::move(holder), "test_file_name", FileOptions()));
ImmutableOptions ioptions(options);
MutableCFOptions moptions(options);
InternalKeyComparator ikc(options.comparator);
IntTblPropCollectorFactories int_tbl_prop_collector_factories;
std::unique_ptr<TableBuilder> builder(options.table_factory->NewTableBuilder(
TableBuilderOptions(ioptions, moptions, ikc,
&int_tbl_prop_collector_factories, kSnappyCompression,
options.compression_opts, kUnknownColumnFamily,
"test_cf", -1 /* level */),
file_writer.get()));
std::string key1 = "key1";
std::string value1 = "val1";
InternalKey ik1(key1, 0 /* sequnce number */, kTypeValue);
// Adding the first key won't trigger a flush by FlushBlockEveryKeyPolicy
// therefore won't trigger any data block's buffering
builder->Add(ik1.Encode(), value1);
ASSERT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
std::string key2 = "key2";
std::string value2(kSizeDummyEntry, '0');
InternalKey ik2(key2, 1 /* sequnce number */, kTypeValue);
// Adding the second key will trigger a flush of the last data block (the one
// containing key1 and value1) by FlushBlockEveryKeyPolicy and hence trigger
// buffering of the last data block.
builder->Add(ik2.Encode(), value2);
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// Cache charging will increase for the last buffered data block (the one
// containing key1 and value1) since the buffer limit is not exceeded after
// the buffering and the cache will not be full after this reservation
EXPECT_GE(cache->GetPinnedUsage(), 1 * kSizeDummyEntry);
EXPECT_LT(cache->GetPinnedUsage(),
1 * kSizeDummyEntry + kMetaDataChargeOverhead);
std::string key3 = "key3";
std::string value3 = "value3";
InternalKey ik3(key3, 2 /* sequnce number */, kTypeValue);
// Adding the third key will trigger a flush of the last data block (the one
// containing key2 and value2) by FlushBlockEveryKeyPolicy and hence trigger
// buffering of the last data block.
builder->Add(ik3.Encode(), value3);
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
// Cache charging will decrease since the cache is now full after
// increasing reservation for the last buffered block and EnterUnbuffered() is
// triggered
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
ASSERT_OK(builder->Finish());
EXPECT_EQ(cache->GetPinnedUsage(), 0 * kSizeDummyEntry);
}
Rewrite memory-charging feature's option API (#9926) Summary: **Context:** Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`. Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags. **Summary:** - Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that - Added missing db bench/stress test for some memory charging features - Renamed related test suite to indicate they are under the same theme of memory charging - Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication - Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926 Test Plan: - New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)` - New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)` - CI - db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465** 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078** - db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36054712 Pulled By: hx235 fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
2022-05-17 22:01:51 +00:00
class CacheUsageOptionsOverridesTest : public DBTestBase {
public:
CacheUsageOptionsOverridesTest()
: DBTestBase("cache_usage_options_overrides_test",
/*env_do_fsync=*/false) {}
};
TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions) {
// To test `cache_usage_options.options_overrides` is sanitized
// where `cache_usage_options.options` is used when there is no entry in
// `cache_usage_options.options_overrides`
Options options;
options.create_if_missing = true;
BlockBasedTableOptions table_options = BlockBasedTableOptions();
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
Destroy(options);
Status s = TryReopen(options);
EXPECT_TRUE(s.ok());
const auto* sanitized_table_options =
options.table_factory->GetOptions<BlockBasedTableOptions>();
const auto sanitized_options_overrides =
sanitized_table_options->cache_usage_options.options_overrides;
EXPECT_EQ(sanitized_options_overrides.size(), kNumCacheEntryRoles);
for (auto options_overrides_iter = sanitized_options_overrides.cbegin();
options_overrides_iter != sanitized_options_overrides.cend();
++options_overrides_iter) {
CacheEntryRoleOptions role_options = options_overrides_iter->second;
CacheEntryRoleOptions default_options =
sanitized_table_options->cache_usage_options.options;
EXPECT_TRUE(role_options == default_options);
}
Destroy(options);
// To test option validation on unsupported CacheEntryRole
table_options = BlockBasedTableOptions();
table_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kDataBlock,
{/*.charged = */ CacheEntryRoleOptions::Decision::kDisabled}});
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
Destroy(options);
s = TryReopen(options);
EXPECT_TRUE(s.IsNotSupported());
EXPECT_TRUE(
s.ToString().find("Enable/Disable CacheEntryRoleOptions::charged") !=
std::string::npos);
EXPECT_TRUE(
s.ToString().find(kCacheEntryRoleToCamelString[static_cast<uint32_t>(
CacheEntryRole::kDataBlock)]) != std::string::npos);
Destroy(options);
// To test option validation on existence of block cache
table_options = BlockBasedTableOptions();
table_options.no_block_cache = true;
table_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kFilterConstruction,
{/*.charged = */ CacheEntryRoleOptions::Decision::kEnabled}});
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
Destroy(options);
s = TryReopen(options);
EXPECT_TRUE(s.IsInvalidArgument());
EXPECT_TRUE(s.ToString().find("Enable CacheEntryRoleOptions::charged") !=
std::string::npos);
EXPECT_TRUE(
s.ToString().find(kCacheEntryRoleToCamelString[static_cast<std::size_t>(
CacheEntryRole::kFilterConstruction)]) != std::string::npos);
EXPECT_TRUE(s.ToString().find("block cache is disabled") !=
std::string::npos);
Destroy(options);
}
} // namespace ROCKSDB_NAMESPACE
int main(int argc, char** argv) {
ROCKSDB_NAMESPACE::port::InstallStackTraceHandler();
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 21:08:00 +00:00
::testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}