rocksdb/table/two_level_iterator.cc

221 lines
6.6 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "table/two_level_iterator.h"
#include "db/pinned_iterators_manager.h"
#include "memory/arena.h"
#include "rocksdb/options.h"
#include "rocksdb/table.h"
#include "table/block_based/block.h"
#include "table/format.h"
namespace ROCKSDB_NAMESPACE {
namespace {
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
class TwoLevelIndexIterator : public InternalIteratorBase<IndexValue> {
public:
explicit TwoLevelIndexIterator(
TwoLevelIteratorState* state,
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* first_level_iter);
~TwoLevelIndexIterator() override {
first_level_iter_.DeleteIter(false /* is_arena_mode */);
second_level_iter_.DeleteIter(false /* is_arena_mode */);
delete state_;
}
void Seek(const Slice& target) override;
void SeekForPrev(const Slice& target) override;
void SeekToFirst() override;
void SeekToLast() override;
void Next() override;
void Prev() override;
bool Valid() const override { return second_level_iter_.Valid(); }
Slice key() const override {
assert(Valid());
return second_level_iter_.key();
}
Slice user_key() const override {
assert(Valid());
return second_level_iter_.user_key();
}
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
IndexValue value() const override {
assert(Valid());
return second_level_iter_.value();
}
Status status() const override {
if (!first_level_iter_.status().ok()) {
Change and clarify the relationship between Valid(), status() and Seek*() for all iterators. Also fix some bugs Summary: Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are: * If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted. * When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not. However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours). This PR changes the convention to: * If status() is not ok, Valid() always returns false. * Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.) This does sacrifice the two use cases listed above, but siying said it's ok. Overview of the changes: * A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario. * Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed. * A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator. To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types: Iterators that didn't need changes: * status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator. * Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator. Iterators with changes (see inline comments for details): * DBIter - an overhaul: - It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back. - It had a few code paths silently discarding subiterator's status. The stress test caught a few. - The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example. - Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption. - It used to not reset status on seek for some types of errors. - Some simplifications and better comments. - Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer. * MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status. * ForwardIterator - changed to the new convention, also slightly simplified. * ForwardLevelIterator - fixed some bugs and simplified. * LevelIterator - simplified. * TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_. * BlockBasedTableIterator - minor changes. * BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid. * PlainTableIterator - some seeks used to not reset status. * CuckooTableIterator - tiny code cleanup. * ManagedIterator - fixed some bugs. * BaseDeltaIterator - changed to the new convention and fixed a bug. * BlobDBIterator - seeks used to not reset status. * KeyConvertingIterator - some small change. Closes https://github.com/facebook/rocksdb/pull/3810 Differential Revision: D7888019 Pulled By: al13n321 fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
2018-05-17 09:44:14 +00:00
assert(second_level_iter_.iter() == nullptr);
return first_level_iter_.status();
} else if (second_level_iter_.iter() != nullptr &&
!second_level_iter_.status().ok()) {
return second_level_iter_.status();
} else {
return status_;
}
}
void SetPinnedItersMgr(
PinnedIteratorsManager* /*pinned_iters_mgr*/) override {}
bool IsKeyPinned() const override { return false; }
bool IsValuePinned() const override { return false; }
private:
void SaveError(const Status& s) {
if (status_.ok() && !s.ok()) status_ = s;
}
void SkipEmptyDataBlocksForward();
void SkipEmptyDataBlocksBackward();
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
void SetSecondLevelIterator(InternalIteratorBase<IndexValue>* iter);
void InitDataBlock();
TwoLevelIteratorState* state_;
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
IteratorWrapperBase<IndexValue> first_level_iter_;
IteratorWrapperBase<IndexValue> second_level_iter_; // May be nullptr
Status status_;
// If second_level_iter is non-nullptr, then "data_block_handle_" holds the
// "index_value" passed to block_function_ to create the second_level_iter.
BlockHandle data_block_handle_;
};
TwoLevelIndexIterator::TwoLevelIndexIterator(
TwoLevelIteratorState* state,
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* first_level_iter)
: state_(state), first_level_iter_(first_level_iter) {}
void TwoLevelIndexIterator::Seek(const Slice& target) {
first_level_iter_.Seek(target);
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.Seek(target);
}
SkipEmptyDataBlocksForward();
}
void TwoLevelIndexIterator::SeekForPrev(const Slice& target) {
first_level_iter_.Seek(target);
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekForPrev(target);
}
if (!Valid()) {
Change and clarify the relationship between Valid(), status() and Seek*() for all iterators. Also fix some bugs Summary: Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are: * If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted. * When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not. However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours). This PR changes the convention to: * If status() is not ok, Valid() always returns false. * Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.) This does sacrifice the two use cases listed above, but siying said it's ok. Overview of the changes: * A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario. * Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed. * A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator. To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types: Iterators that didn't need changes: * status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator. * Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator. Iterators with changes (see inline comments for details): * DBIter - an overhaul: - It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back. - It had a few code paths silently discarding subiterator's status. The stress test caught a few. - The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example. - Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption. - It used to not reset status on seek for some types of errors. - Some simplifications and better comments. - Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer. * MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status. * ForwardIterator - changed to the new convention, also slightly simplified. * ForwardLevelIterator - fixed some bugs and simplified. * LevelIterator - simplified. * TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_. * BlockBasedTableIterator - minor changes. * BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid. * PlainTableIterator - some seeks used to not reset status. * CuckooTableIterator - tiny code cleanup. * ManagedIterator - fixed some bugs. * BaseDeltaIterator - changed to the new convention and fixed a bug. * BlobDBIterator - seeks used to not reset status. * KeyConvertingIterator - some small change. Closes https://github.com/facebook/rocksdb/pull/3810 Differential Revision: D7888019 Pulled By: al13n321 fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
2018-05-17 09:44:14 +00:00
if (!first_level_iter_.Valid() && first_level_iter_.status().ok()) {
first_level_iter_.SeekToLast();
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekForPrev(target);
}
}
SkipEmptyDataBlocksBackward();
}
}
void TwoLevelIndexIterator::SeekToFirst() {
first_level_iter_.SeekToFirst();
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekToFirst();
}
SkipEmptyDataBlocksForward();
}
void TwoLevelIndexIterator::SeekToLast() {
first_level_iter_.SeekToLast();
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekToLast();
}
SkipEmptyDataBlocksBackward();
}
void TwoLevelIndexIterator::Next() {
assert(Valid());
second_level_iter_.Next();
SkipEmptyDataBlocksForward();
}
void TwoLevelIndexIterator::Prev() {
assert(Valid());
second_level_iter_.Prev();
SkipEmptyDataBlocksBackward();
}
void TwoLevelIndexIterator::SkipEmptyDataBlocksForward() {
while (second_level_iter_.iter() == nullptr ||
Change and clarify the relationship between Valid(), status() and Seek*() for all iterators. Also fix some bugs Summary: Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are: * If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted. * When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not. However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours). This PR changes the convention to: * If status() is not ok, Valid() always returns false. * Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.) This does sacrifice the two use cases listed above, but siying said it's ok. Overview of the changes: * A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario. * Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed. * A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator. To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types: Iterators that didn't need changes: * status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator. * Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator. Iterators with changes (see inline comments for details): * DBIter - an overhaul: - It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back. - It had a few code paths silently discarding subiterator's status. The stress test caught a few. - The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example. - Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption. - It used to not reset status on seek for some types of errors. - Some simplifications and better comments. - Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer. * MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status. * ForwardIterator - changed to the new convention, also slightly simplified. * ForwardLevelIterator - fixed some bugs and simplified. * LevelIterator - simplified. * TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_. * BlockBasedTableIterator - minor changes. * BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid. * PlainTableIterator - some seeks used to not reset status. * CuckooTableIterator - tiny code cleanup. * ManagedIterator - fixed some bugs. * BaseDeltaIterator - changed to the new convention and fixed a bug. * BlobDBIterator - seeks used to not reset status. * KeyConvertingIterator - some small change. Closes https://github.com/facebook/rocksdb/pull/3810 Differential Revision: D7888019 Pulled By: al13n321 fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
2018-05-17 09:44:14 +00:00
(!second_level_iter_.Valid() && second_level_iter_.status().ok())) {
// Move to next block
if (!first_level_iter_.Valid()) {
SetSecondLevelIterator(nullptr);
return;
}
first_level_iter_.Next();
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekToFirst();
}
}
}
void TwoLevelIndexIterator::SkipEmptyDataBlocksBackward() {
while (second_level_iter_.iter() == nullptr ||
Change and clarify the relationship between Valid(), status() and Seek*() for all iterators. Also fix some bugs Summary: Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are: * If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted. * When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not. However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours). This PR changes the convention to: * If status() is not ok, Valid() always returns false. * Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.) This does sacrifice the two use cases listed above, but siying said it's ok. Overview of the changes: * A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario. * Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed. * A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator. To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types: Iterators that didn't need changes: * status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator. * Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator. Iterators with changes (see inline comments for details): * DBIter - an overhaul: - It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back. - It had a few code paths silently discarding subiterator's status. The stress test caught a few. - The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example. - Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption. - It used to not reset status on seek for some types of errors. - Some simplifications and better comments. - Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer. * MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status. * ForwardIterator - changed to the new convention, also slightly simplified. * ForwardLevelIterator - fixed some bugs and simplified. * LevelIterator - simplified. * TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_. * BlockBasedTableIterator - minor changes. * BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid. * PlainTableIterator - some seeks used to not reset status. * CuckooTableIterator - tiny code cleanup. * ManagedIterator - fixed some bugs. * BaseDeltaIterator - changed to the new convention and fixed a bug. * BlobDBIterator - seeks used to not reset status. * KeyConvertingIterator - some small change. Closes https://github.com/facebook/rocksdb/pull/3810 Differential Revision: D7888019 Pulled By: al13n321 fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
2018-05-17 09:44:14 +00:00
(!second_level_iter_.Valid() && second_level_iter_.status().ok())) {
// Move to next block
if (!first_level_iter_.Valid()) {
SetSecondLevelIterator(nullptr);
return;
}
first_level_iter_.Prev();
InitDataBlock();
if (second_level_iter_.iter() != nullptr) {
second_level_iter_.SeekToLast();
}
}
}
void TwoLevelIndexIterator::SetSecondLevelIterator(
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* iter) {
InternalIteratorBase<IndexValue>* old_iter = second_level_iter_.Set(iter);
delete old_iter;
}
void TwoLevelIndexIterator::InitDataBlock() {
if (!first_level_iter_.Valid()) {
SetSecondLevelIterator(nullptr);
} else {
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
BlockHandle handle = first_level_iter_.value().handle;
if (second_level_iter_.iter() != nullptr &&
!second_level_iter_.status().IsIncomplete() &&
handle.offset() == data_block_handle_.offset()) {
// second_level_iter is already constructed with this iterator, so
// no need to change anything
} else {
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* iter =
state_->NewSecondaryIterator(handle);
data_block_handle_ = handle;
SetSecondLevelIterator(iter);
if (iter == nullptr) {
status_ = Status::Corruption("Missing block for partition " +
handle.ToString());
}
}
}
}
} // namespace
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* NewTwoLevelIterator(
TwoLevelIteratorState* state,
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-25 03:50:35 +00:00
InternalIteratorBase<IndexValue>* first_level_iter) {
return new TwoLevelIndexIterator(state, first_level_iter);
}
} // namespace ROCKSDB_NAMESPACE