rocksdb/db_stress_tool/db_stress_test_base.cc

3858 lines
148 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
//
#include <ios>
Cleanup, improve, stress test LockWAL() (#11143) Summary: The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change: * Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use. * Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions) * Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability) * Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other. * Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads. * Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143 Test Plan: unit tests added / updated, added to stress/crash test Reviewed By: ajkr Differential Revision: D42848627 Pulled By: pdillinger fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4
2023-01-31 06:52:30 +00:00
#include <thread>
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
#include "rocksdb/options.h"
#include "rocksdb/slice_transform.h"
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857) Summary: An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857 Test Plan: #### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data: Set up: change the parameter [here](https://github.com/facebook/rocksdb/blob/fb9a167a55e0970b1ef6f67c1600c8d9c4c6114f/tools/db_bench_tool.cc#L1766) to 16384 to make synthetic data more compressible. ``` # linked local ZSTD with version 1.5.2 # DEBUG_LEVEL=0 ROCKSDB_NO_FBCODE=1 ROCKSDB_DISABLE_ZSTD=1 EXTRA_CXXFLAGS="-DZSTD_STATIC_LINKING_ONLY -DZSTD -I/data/users/changyubi/install/include/" EXTRA_LDFLAGS="-L/data/users/changyubi/install/lib/ -l:libzstd.a" make -j32 db_bench dict_bytes=16384 train_bytes=1048576 echo "========== No Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== Raw Content Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench_main -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== FinalizeDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== TrainDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total # Result: TrainDictionary is much better on space saving, but FinalizeDictionary seems to use less memory. # before compression data size: 1.2GB dict_bytes=16384 max_dict_buffer_bytes = 1048576 space cpu/memory No Dictionary 468M 14.93user 1.00system 0:15.92elapsed 100%CPU (0avgtext+0avgdata 23904maxresident)k Raw Dictionary 251M 15.81user 0.80system 0:16.56elapsed 100%CPU (0avgtext+0avgdata 156808maxresident)k FinalizeDictionary 236M 11.93user 0.64system 0:12.56elapsed 100%CPU (0avgtext+0avgdata 89548maxresident)k TrainDictionary 84M 7.29user 0.45system 0:07.75elapsed 100%CPU (0avgtext+0avgdata 97288maxresident)k ``` #### Benchmark on 10 sample SST files for spacing saving and CPU time on compression: FinalizeDictionary is comparable to TrainDictionary in terms of space saving, and takes less time in compression. ``` dict_bytes=16384 train_bytes=1048576 for sst_file in `ls ../temp/myrock-sst/` do echo "********** $sst_file **********" echo "========== No Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD echo "========== Raw Content Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes echo "========== FinalizeDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes --compression_use_zstd_finalize_dict echo "========== TrainDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes done 010240.sst (Size/Time) 011029.sst 013184.sst 021552.sst 185054.sst 185137.sst 191666.sst 7560381.sst 7604174.sst 7635312.sst No Dictionary 28165569 / 2614419 32899411 / 2976832 32977848 / 3055542 31966329 / 2004590 33614351 / 1755877 33429029 / 1717042 33611933 / 1776936 33634045 / 2771417 33789721 / 2205414 33592194 / 388254 Raw Content Dictionary 28019950 / 2697961 33748665 / 3572422 33896373 / 3534701 26418431 / 2259658 28560825 / 1839168 28455030 / 1846039 28494319 / 1861349 32391599 / 3095649 33772142 / 2407843 33592230 / 474523 FinalizeDictionary 27896012 / 2650029 33763886 / 3719427 33904283 / 3552793 26008225 / 2198033 28111872 / 1869530 28014374 / 1789771 28047706 / 1848300 32296254 / 3204027 33698698 / 2381468 33592344 / 517433 TrainDictionary 28046089 / 2740037 33706480 / 3679019 33885741 / 3629351 25087123 / 2204558 27194353 / 1970207 27234229 / 1896811 27166710 / 1903119 32011041 / 3322315 32730692 / 2406146 33608631 / 570593 ``` #### Decompression/Read test: With FinalizeDictionary/TrainDictionary, some data structure used for decompression are in stored in dictionary, so they are expected to be faster in terms of decompression/reads. ``` dict_bytes=16384 train_bytes=1048576 echo "No Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=0 > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=0 2>&1 | grep MB/s echo "Raw Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes 2>&1 | grep MB/s echo "FinalizeDict" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false 2>&1 | grep MB/s echo "Train Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes 2>&1 | grep MB/s No Dictionary readrandom : 12.183 micros/op 82082 ops/sec 12.183 seconds 1000000 operations; 9.1 MB/s (1000000 of 1000000 found) Raw Dictionary readrandom : 12.314 micros/op 81205 ops/sec 12.314 seconds 1000000 operations; 9.0 MB/s (1000000 of 1000000 found) FinalizeDict readrandom : 9.787 micros/op 102180 ops/sec 9.787 seconds 1000000 operations; 11.3 MB/s (1000000 of 1000000 found) Train Dictionary readrandom : 9.698 micros/op 103108 ops/sec 9.699 seconds 1000000 operations; 11.4 MB/s (1000000 of 1000000 found) ``` Reviewed By: ajkr Differential Revision: D35720026 Pulled By: cbi42 fbshipit-source-id: 24d230fdff0fd28a1bb650658798f00dfcfb2a1f
2022-05-20 19:09:09 +00:00
#include "util/compression.h"
#ifdef GFLAGS
#include "db_stress_tool/db_stress_common.h"
#include "db_stress_tool/db_stress_compaction_filter.h"
#include "db_stress_tool/db_stress_driver.h"
#include "db_stress_tool/db_stress_table_properties_collector.h"
#include "db_stress_tool/db_stress_wide_merge_operator.h"
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
#include "options/options_parser.h"
#include "rocksdb/convenience.h"
#include "rocksdb/filter_policy.h"
#include "rocksdb/secondary_cache.h"
#include "rocksdb/sst_file_manager.h"
#include "rocksdb/types.h"
#include "rocksdb/utilities/object_registry.h"
Support WriteCommit policy with sync_fault_injection=1 (#10624) Summary: **Context:** Prior to this PR, correctness testing with un-sync data loss [disabled](https://github.com/facebook/rocksdb/pull/10605) transaction (`use_txn=1`) thus all of the `txn_write_policy` . This PR improved that by adding support for one policy - WriteCommit (`txn_write_policy=0`). **Summary:** They key to this support is (a) handle Mark{Begin, End}Prepare/MarkCommit/MarkRollback in constructing ExpectedState under WriteCommit policy correctly and (b) monitor CI jobs and solve any test incompatibility issue till jobs are stable. (b) will be part of the test plan. For (a) - During prepare (i.e, between `MarkBeginPrepare()` and `MarkEndPrepare(xid)`), `ExpectedStateTraceRecordHandler` will buffer all writes by adding all writes to an internal `WriteBatch`. - On `MarkEndPrepare()`, that `WriteBatch` will be associated with the transaction's `xid`. - During the commit (i.e, on `MarkCommit(xid)`), `ExpectedStateTraceRecordHandler` will retrieve and iterate the internal `WriteBatch` and finally apply those writes to `ExpectedState` - During the rollback (i.e, on `MarkRollback(xid)`), `ExpectedStateTraceRecordHandler` will erase the internal `WriteBatch` from the map. For (b) - one major issue described below: - TransactionsDB in db stress recovers prepared-but-not-committed txns from the previous crashed run by randomly committing or rolling back it at the start of the current run, see a historical [PR](https://github.com/facebook/rocksdb/commit/6d06be22c083ccf185fd38dba49fde73b644b4c1) predated correctness testing. - And we will verify those processed keys in a recovered db against their expected state. - However since now we turn on `sync_fault_injection=1` where the expected state is constructed from the trace instead of using the LATEST.state from previous run. The expected state now used to verify those processed keys won't contain UNKNOWN_SENTINEL as they should - see test 1 for a failed case. - Therefore, we decided to manually update its expected state to be UNKNOWN_SENTINEL as part of the processing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10624 Test Plan: 1. Test exposed the major issue described above. This test will fail without setting UNKNOWN_SENTINEL in expected state during the processing and pass after ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected dbt=$db.tmp expt=$exp.tmp rm -rf $db $exp mkdir -p $exp echo "RUN 1" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 2" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 3" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 2. Manual testing to ensure ExpectedState is constructed correctly during recovery by verifying it against previously crashed TransactionDB's WAL. - Run the following command to crash a TransactionDB with WriteCommit policy. Then `./ldb dump_wal` on its WAL file ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected rm -rf $db $exp mkdir -p $exp ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 30 kill $pid sleep 1 ``` - Run the following command to verify recovery of the crashed db under debugger. Compare the step-wise result with WAL records (e.g, WriteBatch content, xid, prepare/commit/rollback marker) ``` ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 3. Automatic testing by triggering all RocksDB stress/crash test jobs for 3 rounds with no failure. Reviewed By: ajkr, riversand963 Differential Revision: D39199373 Pulled By: hx235 fbshipit-source-id: 7a1dec0e3e2ee6ea86ddf5dd19ceb5543a3d6f0c
2022-09-27 01:01:59 +00:00
#include "rocksdb/utilities/write_batch_with_index.h"
#include "test_util/testutil.h"
#include "util/cast_util.h"
#include "utilities/backup/backup_engine_impl.h"
#include "utilities/fault_injection_fs.h"
#include "utilities/fault_injection_secondary_cache.h"
namespace ROCKSDB_NAMESPACE {
namespace {
std::shared_ptr<const FilterPolicy> CreateFilterPolicy() {
if (FLAGS_bloom_bits < 0) {
return BlockBasedTableOptions().filter_policy;
}
const FilterPolicy* new_policy;
if (FLAGS_bloom_before_level == INT_MAX) {
Add Bloom/Ribbon hybrid API support (#8679) Summary: This is essentially resurrection and fixing of the part of https://github.com/facebook/rocksdb/issues/8198 that was reverted in https://github.com/facebook/rocksdb/issues/8212, using data added in https://github.com/facebook/rocksdb/issues/8246. Basically, when configuring Ribbon filter, you can specify an LSM level before which Bloom will be used instead of Ribbon. But Bloom is only considered for Leveled and Universal compaction styles and file going into a known LSM level. This way, SST file writer, FIFO compaction, etc. use Ribbon filter as you would expect with NewRibbonFilterPolicy. So that this can be controlled with a single int value and so that flushes can be distinguished from intra-L0, we consider flush to go to level -1 for the purposes of this option. (Explained in API comment.) I also expect the most common and recommended Ribbon configuration to use Bloom during flush, to minimize slowing down writes and because according to my estimates, Ribbon only pays off if the structure lives in memory for more than an hour. Thus, I have changed the default for NewRibbonFilterPolicy to be this mild hybrid configuration. I don't really want to add something like NewHybridFilterPolicy because at least the mild hybrid configuration (Bloom for flush, Ribbon otherwise) should be considered a natural choice. C APIs also updated, but because they don't support overloading, rocksdb_filterpolicy_create_ribbon is kept pure ribbon for clarity and rocksdb_filterpolicy_create_ribbon_hybrid must be called for a hybrid configuration. While touching C API, I changed bits per key options from int to double. BuiltinFilterPolicy is needed so that LevelThresholdFilterPolicy doesn't inherit unused fields from BloomFilterPolicy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8679 Test Plan: new + updated tests, including crash test Reviewed By: jay-zhuang Differential Revision: D30445797 Pulled By: pdillinger fbshipit-source-id: 6f5aeddfd6d79f7e55493b563c2d1d2d568892e1
2021-08-21 00:59:24 +00:00
// Use Bloom API
new_policy = NewBloomFilterPolicy(FLAGS_bloom_bits, false);
} else {
new_policy =
NewRibbonFilterPolicy(FLAGS_bloom_bits, FLAGS_bloom_before_level);
}
return std::shared_ptr<const FilterPolicy>(new_policy);
}
} // namespace
StressTest::StressTest()
: cache_(NewCache(FLAGS_cache_size, FLAGS_cache_numshardbits)),
filter_policy_(CreateFilterPolicy()),
db_(nullptr),
txn_db_(nullptr),
optimistic_txn_db_(nullptr),
db_aptr_(nullptr),
clock_(db_stress_env->GetSystemClock().get()),
new_column_family_name_(1),
num_times_reopened_(0),
db_preload_finished_(false),
cmp_db_(nullptr),
is_db_stopped_(false) {
if (FLAGS_destroy_db_initially) {
std::vector<std::string> files;
db_stress_env->GetChildren(FLAGS_db, &files);
for (unsigned int i = 0; i < files.size(); i++) {
if (Slice(files[i]).starts_with("heap-")) {
db_stress_env->DeleteFile(FLAGS_db + "/" + files[i]);
}
}
Options options;
options.env = db_stress_env;
// Remove files without preserving manfiest files
const Status s = !FLAGS_use_blob_db
? DestroyDB(FLAGS_db, options)
: blob_db::DestroyBlobDB(FLAGS_db, options,
blob_db::BlobDBOptions());
if (!s.ok()) {
fprintf(stderr, "Cannot destroy original db: %s\n", s.ToString().c_str());
exit(1);
}
}
}
StressTest::~StressTest() {
for (auto cf : column_families_) {
delete cf;
}
column_families_.clear();
delete db_;
for (auto* cf : cmp_cfhs_) {
delete cf;
}
cmp_cfhs_.clear();
delete cmp_db_;
}
std::shared_ptr<Cache> StressTest::NewCache(size_t capacity,
int32_t num_shard_bits) {
ConfigOptions config_options;
if (capacity <= 0) {
return nullptr;
}
HyperClockCache support for SecondaryCache, with refactoring (#11301) Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
2023-03-18 03:23:49 +00:00
std::shared_ptr<SecondaryCache> secondary_cache;
if (!FLAGS_secondary_cache_uri.empty()) {
assert(!strstr(FLAGS_secondary_cache_uri.c_str(),
"compressed_secondary_cache") ||
(FLAGS_compressed_secondary_cache_size == 0 &&
FLAGS_compressed_secondary_cache_ratio == 0.0 &&
!StartsWith(FLAGS_cache_type, "tiered_")));
HyperClockCache support for SecondaryCache, with refactoring (#11301) Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
2023-03-18 03:23:49 +00:00
Status s = SecondaryCache::CreateFromString(
config_options, FLAGS_secondary_cache_uri, &secondary_cache);
if (secondary_cache == nullptr) {
fprintf(stderr,
"No secondary cache registered matching string: %s status=%s\n",
FLAGS_secondary_cache_uri.c_str(), s.ToString().c_str());
exit(1);
}
if (FLAGS_secondary_cache_fault_one_in > 0) {
secondary_cache = std::make_shared<FaultInjectionSecondaryCache>(
secondary_cache, static_cast<uint32_t>(FLAGS_seed),
FLAGS_secondary_cache_fault_one_in);
}
} else if (FLAGS_compressed_secondary_cache_size > 0) {
if (StartsWith(FLAGS_cache_type, "tiered_")) {
fprintf(stderr,
"Cannot specify both compressed_secondary_cache_size and %s\n",
FLAGS_cache_type.c_str());
exit(1);
}
CompressedSecondaryCacheOptions opts;
opts.capacity = FLAGS_compressed_secondary_cache_size;
opts.compress_format_version = FLAGS_compress_format_version;
if (FLAGS_enable_do_not_compress_roles) {
opts.do_not_compress_roles = {CacheEntryRoleSet::All()};
}
opts.enable_custom_split_merge = FLAGS_enable_custom_split_merge;
secondary_cache = NewCompressedSecondaryCache(opts);
if (secondary_cache == nullptr) {
fprintf(stderr, "Failed to allocate compressed secondary cache\n");
exit(1);
}
compressed_secondary_cache = secondary_cache;
HyperClockCache support for SecondaryCache, with refactoring (#11301) Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
2023-03-18 03:23:49 +00:00
}
std::string cache_type = FLAGS_cache_type;
size_t cache_size = FLAGS_cache_size;
bool tiered = false;
if (StartsWith(cache_type, "tiered_")) {
tiered = true;
cache_type.erase(0, strlen("tiered_"));
}
if (FLAGS_use_write_buffer_manager) {
cache_size += FLAGS_db_write_buffer_size;
}
if (cache_type == "clock_cache") {
Call experimental new clock cache HyperClockCache (#10684) Summary: This change establishes a distinctive name for the experimental new lock-free clock cache (originally developed by guidotag and revamped in PR https://github.com/facebook/rocksdb/issues/10626). A few reasons: * We want to make it clear that this is a fundamentally different implementation vs. the old clock cache, to avoid people saying "I already tried clock cache." * We want to highlight the key feature: it's fast (especially under parallel load) * Because it requires an estimated charge per entry, it is not drop-in API compatible with old clock cache. This estimate might always be required for highest performance, and giving it a distinct name should reduce confusion about the distinct API requirements. * We might develop a variant requiring the same estimate parameter but with LRU eviction. In that case, using the name HyperLRUCache should make things more clear. (FastLRUCache is just a prototype that might soon be removed.) Some API detail: * To reduce copy-pasting parameter lists, etc. as in LRUCache construction, I have a `MakeSharedCache()` function on `HyperClockCacheOptions` instead of `NewHyperClockCache()`. * Changes -cache_type=clock_cache to -cache_type=hyper_clock_cache for applicable tools. I think this is more consistent / sustainable for reasons already stated. For performance tests see https://github.com/facebook/rocksdb/pull/10626 Pull Request resolved: https://github.com/facebook/rocksdb/pull/10684 Test Plan: no interesting functional changes; tests updated Reviewed By: anand1976 Differential Revision: D39547800 Pulled By: pdillinger fbshipit-source-id: 5c0fe1b5cf3cb680ab369b928c8569682b9795bf
2022-09-16 19:47:29 +00:00
fprintf(stderr, "Old clock cache implementation has been removed.\n");
exit(1);
} else if (EndsWith(cache_type, "hyper_clock_cache")) {
Placeholder for AutoHyperClockCache, more (#11692) Summary: * The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation. * Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache). * Simplify some existing tests not to depend directly on cache type. * Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation. * Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test. * Add another templated class BaseHyperClockCache to reduce future copy-paste * Added ReportProblems support to cache_bench * Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC: ``` 2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17 ``` In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692 Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in. Reviewed By: jowlyzhang Differential Revision: D48247413 Pulled By: pdillinger fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
2023-08-11 23:27:38 +00:00
size_t estimated_entry_charge;
if (cache_type == "fixed_hyper_clock_cache" ||
cache_type == "hyper_clock_cache") {
Placeholder for AutoHyperClockCache, more (#11692) Summary: * The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation. * Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache). * Simplify some existing tests not to depend directly on cache type. * Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation. * Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test. * Add another templated class BaseHyperClockCache to reduce future copy-paste * Added ReportProblems support to cache_bench * Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC: ``` 2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17 ``` In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692 Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in. Reviewed By: jowlyzhang Differential Revision: D48247413 Pulled By: pdillinger fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
2023-08-11 23:27:38 +00:00
estimated_entry_charge = FLAGS_block_size;
} else if (cache_type == "auto_hyper_clock_cache") {
Placeholder for AutoHyperClockCache, more (#11692) Summary: * The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation. * Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache). * Simplify some existing tests not to depend directly on cache type. * Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation. * Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test. * Add another templated class BaseHyperClockCache to reduce future copy-paste * Added ReportProblems support to cache_bench * Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC: ``` 2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17 ``` In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692 Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in. Reviewed By: jowlyzhang Differential Revision: D48247413 Pulled By: pdillinger fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
2023-08-11 23:27:38 +00:00
estimated_entry_charge = 0;
} else {
fprintf(stderr, "Cache type not supported.");
exit(1);
}
HyperClockCacheOptions opts(cache_size, estimated_entry_charge,
HyperClockCache support for SecondaryCache, with refactoring (#11301) Summary: Internally refactors SecondaryCache integration out of LRUCache specifically and into a wrapper/adapter class that works with various Cache implementations. Notably, this relies on separating the notion of async lookup handles from other cache handles, so that HyperClockCache doesn't have to deal with the problem of allocating handles from the hash table for lookups that might fail anyway, and might be on the same key without support for coalescing. (LRUCache's hash table can incorporate previously allocated handles thanks to its pointer indirection.) Specifically, I'm worried about the case in which hundreds of threads try to access the same block and probing in the hash table degrades to linear search on the pile of entries with the same key. This change is a big step in the direction of supporting stacked SecondaryCaches, but there are obstacles to completing that. Especially, there is no SecondaryCache hook for evictions to pass from one to the next. It has been proposed that evictions be transmitted simply as the persisted data (as in SaveToCallback), but given the current structure provided by the CacheItemHelpers, that would require an extra copy of the block data, because there's intentionally no way to ask for a contiguous Slice of the data (to allow for flexibility in storage). `AsyncLookupHandle` and the re-worked `WaitAll()` should be essentially prepared for stacked SecondaryCaches, but several "TODO with stacked secondaries" issues remain in various places. It could be argued that the stacking instead be done as a SecondaryCache adapter that wraps two (or more) SecondaryCaches, but at least with the current API that would require an extra heap allocation on SecondaryCache Lookup for a wrapper SecondaryCacheResultHandle that can transfer a Lookup between secondaries. We could also consider trying to unify the Cache and SecondaryCache APIs, though that might be difficult if `AsyncLookupHandle` is kept a fixed struct. ## cache.h (public API) Moves `secondary_cache` option from LRUCacheOptions to ShardedCacheOptions so that it is applicable to HyperClockCache. ## advanced_cache.h (advanced public API) * Add `Cache::CreateStandalone()` so that the SecondaryCache support wrapper can use it. * Add `SetEvictionCallback()` / `eviction_callback_` so that the SecondaryCache support wrapper can use it. Only a single callback is supported for efficiency. If there is ever a need for more than one, hopefully that can be handled with a broadcast callback wrapper. These are essentially the two "extra" pieces of `Cache` for pulling out specific SecondaryCache support from the `Cache` implementation. I think it's a good trade-off as these are reasonable, limited, and reusable "cut points" into the `Cache` implementations. * Remove async capability from standard `Lookup()` (getting rid of awkward restrictions on pending Handles) and add `AsyncLookupHandle` and `StartAsyncLookup()`. As noted in the comments, the full struct of `AsyncLookupHandle` is exposed so that it can be stack allocated, for efficiency, though more data is being copied around than before, which could impact performance. (Lookup info -> AsyncLookupHandle -> Handle vs. Lookup info -> Handle) I could foresee a future in which a Cache internally saves a pointer to the AsyncLookupHandle, which means it's dangerous to allow it to be copyable or even movable. It also means it's not compatible with std::vector (which I don't like requiring as an API parameter anyway), so `WaitAll()` expects any contiguous array of AsyncLookupHandles. I believe this is best for common case efficiency, while behaving well in other cases also. For example, `WaitAll()` has no effect on default-constructed AsyncLookupHandles, which look like a completed cache miss. ## cacheable_entry.h A couple of functions are obsolete because Cache::Handle can no longer be pending. ## cache.cc Provides default implementations for new or revamped Cache functions, especially appropriate for non-blocking caches. ## secondary_cache_adapter.{h,cc} The full details of the Cache wrapper adding SecondaryCache support. Essentially replicates the SecondaryCache handling that was in LRUCache, but obviously refactored. There is a bit of logic duplication, where Lookup() is essentially a manually optimized version of StartAsyncLookup() and Wait(), but it's roughly a dozen lines of code. ## sharded_cache.h, typed_cache.h, charged_cache.{h,cc}, sim_cache.cc Simply updated for Cache API changes. ## lru_cache.{h,cc} Carefully remove SecondaryCache logic, implement `CreateStandalone` and eviction handler functionality. ## clock_cache.{h,cc} Expose existing `CreateStandalone` functionality, add eviction handler functionality. Light refactoring. ## block_based_table_reader* Mostly re-worked the only usage of async Lookup, which is in BlockBasedTable::MultiGet. Used arrays in place of autovector in some places for efficiency. Simplified some logic by not trying to process some cache results before they're all ready. Created new function `BlockBasedTable::GetCachePriority()` to reduce some pre-existing code duplication (and avoid making it worse). Fixed at least one small bug from the prior confusing mixture of async and sync Lookups. In MaybeReadBlockAndLoadToCache(), called by RetrieveBlock(), called by MultiGet() with wait=false, is_cache_hit for the block_cache_tracer entry would not be set to true if the handle was pending after Lookup and before Wait. ## Intended follow-up work * Figure out if there are any missing stats or block_cache_tracer work in refactored BlockBasedTable::MultiGet * Stacked secondary caches (see above discussion) * See if we can make up for the small MultiGet performance regression. * Study more performance with SecondaryCache * Items evicted from over-full LRUCache in Release were not being demoted to SecondaryCache, and still aren't to minimize unit test churn. Ideally they would be demoted, but it's an exceptional case so not a big deal. * Use CreateStandalone for cache reservations (save unnecessary hash table operations). Not a big deal, but worthy cleanup. * Somehow I got the contract for SecondaryCache::Insert wrong in #10945. (Doesn't take ownership!) That API comment needs to be fixed, but didn't want to mingle that in here. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11301 Test Plan: ## Unit tests Generally updated to include HCC in SecondaryCache tests, though HyperClockCache has some different, less strict behaviors that leads to some tests not really being set up to work with it. Some of the tests remain disabled with it, but I think we have good coverage without them. ## Crash/stress test Updated to use the new combination. ## Performance First, let's check for regression on caches without secondary cache configured. Adding support for the eviction callback is likely to have a tiny effect, but it shouldn't be worrisome. LRUCache could benefit slightly from less logic around SecondaryCache handling. We can test with cache_bench default settings, built with DEBUG_LEVEL=0 and PORTABLE=0. ``` (while :; do base/cache_bench --cache_type=hyper_clock_cache | grep Rough; done) | awk '{ sum += $9; count++; print $0; print "Average: " int(sum / count) }' ``` **Before** this and #11299 (which could also have a small effect), running for about an hour, before & after running concurrently for each cache type: HyperClockCache: 3168662 (average parallel ops/sec) LRUCache: 2940127 **After** this and #11299, running for about an hour: HyperClockCache: 3164862 (average parallel ops/sec) (0.12% slower) LRUCache: 2940928 (0.03% faster) This is an acceptable difference IMHO. Next, let's consider essentially the worst case of new CPU overhead affecting overall performance. MultiGet uses the async lookup interface regardless of whether SecondaryCache or folly are used. We can configure a benchmark where all block cache queries are for data blocks, and all are hits. Create DB and test (before and after tests running simultaneously): ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16 TEST_TMPDIR=/dev/shm base/db_bench -benchmarks=multireadrandom[-X30] -readonly -multiread_batched -batch_size=32 -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: multireadrandom [AVG 30 runs] : 3444202 (± 57049) ops/sec; 240.9 (± 4.0) MB/sec multireadrandom [MEDIAN 30 runs] : 3514443 ops/sec; 245.8 MB/sec **After**: multireadrandom [AVG 30 runs] : 3291022 (± 58851) ops/sec; 230.2 (± 4.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3366179 ops/sec; 235.4 MB/sec So that's roughly a 3% regression, on kind of a *worst case* test of MultiGet CPU. Similar story with HyperClockCache: **Before**: multireadrandom [AVG 30 runs] : 3933777 (± 41840) ops/sec; 275.1 (± 2.9) MB/sec multireadrandom [MEDIAN 30 runs] : 3970667 ops/sec; 277.7 MB/sec **After**: multireadrandom [AVG 30 runs] : 3755338 (± 30391) ops/sec; 262.6 (± 2.1) MB/sec multireadrandom [MEDIAN 30 runs] : 3785696 ops/sec; 264.8 MB/sec Roughly a 4-5% regression. Not ideal, but not the whole story, fortunately. Let's also look at Get() in db_bench: ``` TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X30] -readonly -num=30000000 -bloom_bits=16 -cache_size=6789000000 -duration 20 -threads=16 ``` **Before**: readrandom [AVG 30 runs] : 2198685 (± 13412) ops/sec; 153.8 (± 0.9) MB/sec readrandom [MEDIAN 30 runs] : 2209498 ops/sec; 154.5 MB/sec **After**: readrandom [AVG 30 runs] : 2292814 (± 43508) ops/sec; 160.3 (± 3.0) MB/sec readrandom [MEDIAN 30 runs] : 2365181 ops/sec; 165.4 MB/sec That's showing roughly a 4% improvement, perhaps because of the secondary cache code that is no longer part of LRUCache. But weirdly, HyperClockCache is also showing 2-3% improvement: **Before**: readrandom [AVG 30 runs] : 2272333 (± 9992) ops/sec; 158.9 (± 0.7) MB/sec readrandom [MEDIAN 30 runs] : 2273239 ops/sec; 159.0 MB/sec **After**: readrandom [AVG 30 runs] : 2332407 (± 11252) ops/sec; 163.1 (± 0.8) MB/sec readrandom [MEDIAN 30 runs] : 2335329 ops/sec; 163.3 MB/sec Reviewed By: ltamasi Differential Revision: D44177044 Pulled By: pdillinger fbshipit-source-id: e808e48ff3fe2f792a79841ba617be98e48689f5
2023-03-18 03:23:49 +00:00
num_shard_bits);
Placeholder for AutoHyperClockCache, more (#11692) Summary: * The plan is for AutoHyperClockCache to be selected when HyperClockCacheOptions::estimated_entry_charge == 0, and in that case to use a new configuration option min_avg_entry_charge for determining an extreme case maximum size for the hash table. For the placeholder, a hack is in place in HyperClockCacheOptions::MakeSharedCache() to make the unit tests happy despite the new options not really making sense with the current implementation. * Mostly updating and refactoring tests to test both the current HCC (internal name FixedHyperClockCache) and a placeholder for the new version (internal name AutoHyperClockCache). * Simplify some existing tests not to depend directly on cache type. * Type-parameterize the shard-level unit tests, which unfortunately requires more syntax like `this->` in places for disambiguation. * Added means of choosing auto_hyper_clock_cache to cache_bench, db_bench, and db_stress, including add to crash test. * Add another templated class BaseHyperClockCache to reduce future copy-paste * Added ReportProblems support to cache_bench * Added a DEBUG-level diagnostic to ReportProblems for the variance in load factor throughout the table, which will become more of a concern with linear hashing to be used in the Auto implementation. Example with current Fixed HCC: ``` 2023/08/10-13:41:41.602450 6ac36 [DEBUG] [che/clock_cache.cc:1507] Slot occupancy stats: Overall 49% (129008/262144), Min/Max/Window = 39%/60%/500, MaxRun{Pos/Neg} = 18/17 ``` In other words, with overall occupancy of 49%, the lowest across any 500 contiguous cells is 39% and highest 60%. Longest run of occupied is 18 and longest run of unoccupied is 17. This seems consistent with random samples from a uniform distribution. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11692 Test Plan: Shouldn't be any meaningful changes yet to production code or to what is tested, but there is temporary redundancy in testing until the new implementation is plugged in. Reviewed By: jowlyzhang Differential Revision: D48247413 Pulled By: pdillinger fbshipit-source-id: 11541f996d97af403c2e43c92fb67ff22dd0b5da
2023-08-11 23:27:38 +00:00
opts.hash_seed = BitwiseAnd(FLAGS_seed, INT32_MAX);
if (tiered) {
TieredCacheOptions tiered_opts;
tiered_opts.cache_opts = &opts;
tiered_opts.cache_type = PrimaryCacheType::kCacheTypeHCC;
tiered_opts.total_capacity = cache_size;
tiered_opts.compressed_secondary_ratio = 0.5;
tiered_opts.adm_policy =
static_cast<TieredAdmissionPolicy>(FLAGS_adm_policy);
if (tiered_opts.adm_policy ==
TieredAdmissionPolicy::kAdmPolicyThreeQueue) {
CompressedSecondaryCacheOptions nvm_sec_cache_opts;
nvm_sec_cache_opts.capacity = cache_size;
tiered_opts.nvm_sec_cache =
NewCompressedSecondaryCache(nvm_sec_cache_opts);
}
block_cache = NewTieredCache(tiered_opts);
} else {
opts.secondary_cache = std::move(secondary_cache);
block_cache = opts.MakeSharedCache();
}
} else if (EndsWith(cache_type, "lru_cache")) {
LRUCacheOptions opts;
opts.capacity = capacity;
opts.num_shard_bits = num_shard_bits;
opts.metadata_charge_policy =
static_cast<CacheMetadataChargePolicy>(FLAGS_metadata_charge_policy);
opts.use_adaptive_mutex = FLAGS_use_adaptive_mutex_lru;
opts.high_pri_pool_ratio = FLAGS_high_pri_pool_ratio;
opts.low_pri_pool_ratio = FLAGS_low_pri_pool_ratio;
if (tiered) {
TieredCacheOptions tiered_opts;
tiered_opts.cache_opts = &opts;
tiered_opts.cache_type = PrimaryCacheType::kCacheTypeLRU;
tiered_opts.total_capacity = cache_size;
tiered_opts.compressed_secondary_ratio = 0.5;
tiered_opts.adm_policy =
static_cast<TieredAdmissionPolicy>(FLAGS_adm_policy);
if (tiered_opts.adm_policy ==
TieredAdmissionPolicy::kAdmPolicyThreeQueue) {
CompressedSecondaryCacheOptions nvm_sec_cache_opts;
nvm_sec_cache_opts.capacity = cache_size;
tiered_opts.nvm_sec_cache =
NewCompressedSecondaryCache(nvm_sec_cache_opts);
}
block_cache = NewTieredCache(tiered_opts);
} else {
opts.secondary_cache = std::move(secondary_cache);
block_cache = NewLRUCache(opts);
}
} else {
fprintf(stderr, "Cache type not supported.");
exit(1);
}
return block_cache;
}
std::vector<std::string> StressTest::GetBlobCompressionTags() {
std::vector<std::string> compression_tags{"kNoCompression"};
if (Snappy_Supported()) {
compression_tags.emplace_back("kSnappyCompression");
}
if (LZ4_Supported()) {
compression_tags.emplace_back("kLZ4Compression");
}
if (ZSTD_Supported()) {
compression_tags.emplace_back("kZSTD");
}
return compression_tags;
}
bool StressTest::BuildOptionsTable() {
if (FLAGS_set_options_one_in <= 0) {
return true;
}
std::unordered_map<std::string, std::vector<std::string>> options_tbl = {
{"write_buffer_size",
{std::to_string(options_.write_buffer_size),
std::to_string(options_.write_buffer_size * 2),
std::to_string(options_.write_buffer_size * 4)}},
{"max_write_buffer_number",
{std::to_string(options_.max_write_buffer_number),
std::to_string(options_.max_write_buffer_number * 2),
std::to_string(options_.max_write_buffer_number * 4)}},
{"arena_block_size",
{
std::to_string(options_.arena_block_size),
std::to_string(options_.write_buffer_size / 4),
std::to_string(options_.write_buffer_size / 8),
}},
{"memtable_huge_page_size", {"0", std::to_string(2 * 1024 * 1024)}},
{"max_successive_merges", {"0", "2", "4"}},
{"strict_max_successive_merges", {"false", "true"}},
{"inplace_update_num_locks", {"100", "200", "300"}},
// TODO: re-enable once internal task T124324915 is fixed.
// {"experimental_mempurge_threshold", {"0.0", "1.0"}},
// TODO(ljin): enable test for this option
// {"disable_auto_compactions", {"100", "200", "300"}},
{"level0_file_num_compaction_trigger",
{
std::to_string(options_.level0_file_num_compaction_trigger),
std::to_string(options_.level0_file_num_compaction_trigger + 2),
std::to_string(options_.level0_file_num_compaction_trigger + 4),
}},
{"level0_slowdown_writes_trigger",
{
std::to_string(options_.level0_slowdown_writes_trigger),
std::to_string(options_.level0_slowdown_writes_trigger + 2),
std::to_string(options_.level0_slowdown_writes_trigger + 4),
}},
{"level0_stop_writes_trigger",
{
std::to_string(options_.level0_stop_writes_trigger),
std::to_string(options_.level0_stop_writes_trigger + 2),
std::to_string(options_.level0_stop_writes_trigger + 4),
}},
{"max_compaction_bytes",
{
std::to_string(options_.target_file_size_base * 5),
std::to_string(options_.target_file_size_base * 15),
std::to_string(options_.target_file_size_base * 100),
}},
{"target_file_size_base",
{
std::to_string(options_.target_file_size_base),
std::to_string(options_.target_file_size_base * 2),
std::to_string(options_.target_file_size_base * 4),
}},
{"target_file_size_multiplier",
{
std::to_string(options_.target_file_size_multiplier),
"1",
"2",
}},
{"max_bytes_for_level_base",
{
std::to_string(options_.max_bytes_for_level_base / 2),
std::to_string(options_.max_bytes_for_level_base),
std::to_string(options_.max_bytes_for_level_base * 2),
}},
{"max_bytes_for_level_multiplier",
{
std::to_string(options_.max_bytes_for_level_multiplier),
"1",
"2",
}},
{"max_sequential_skip_in_iterations", {"4", "8", "12"}},
};
if (FLAGS_allow_setting_blob_options_dynamically) {
options_tbl.emplace("enable_blob_files",
std::vector<std::string>{"false", "true"});
options_tbl.emplace("min_blob_size",
std::vector<std::string>{"0", "8", "16"});
options_tbl.emplace("blob_file_size",
std::vector<std::string>{"1M", "16M", "256M", "1G"});
options_tbl.emplace("blob_compression_type", GetBlobCompressionTags());
options_tbl.emplace("enable_blob_garbage_collection",
std::vector<std::string>{"false", "true"});
options_tbl.emplace(
"blob_garbage_collection_age_cutoff",
std::vector<std::string>{"0.0", "0.25", "0.5", "0.75", "1.0"});
Make it possible to force the garbage collection of the oldest blob files (#8994) Summary: The current BlobDB garbage collection logic works by relocating the valid blobs from the oldest blob files as they are encountered during compaction, and cleaning up blob files once they contain nothing but garbage. However, with sufficiently skewed workloads, it is theoretically possible to end up in a situation when few or no compactions get scheduled for the SST files that contain references to the oldest blob files, which can lead to increased space amp due to the lack of GC. In order to efficiently handle such workloads, the patch adds a new BlobDB configuration option called `blob_garbage_collection_force_threshold`, which signals to BlobDB to schedule targeted compactions for the SST files that keep alive the oldest batch of blob files if the overall ratio of garbage in the given blob files meets the threshold *and* all the given blob files are eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example, if the new option is set to 0.9, targeted compactions will get scheduled if the sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the oldest blob files, assuming all affected blob files are below the age-based cutoff.) The net result of these targeted compactions is that the valid blobs in the oldest blob files are relocated and the oldest blob files themselves cleaned up (since *all* SST files that rely on them get compacted away). These targeted compactions are similar to periodic compactions in the sense that they force certain SST files that otherwise would not get picked up to undergo compaction and also in the sense that instead of merging files from multiple levels, they target a single file. (Note: such compactions might still include neighboring files from the same level due to the need of having a "clean cut" boundary but they never include any files from any other level.) This functionality is currently only supported with the leveled compaction style and is inactive by default (since the default value is set to 1.0, i.e. 100%). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994 Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests. Reviewed By: riversand963 Differential Revision: D31489850 Pulled By: ltamasi fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
2021-10-12 01:00:44 +00:00
options_tbl.emplace("blob_garbage_collection_force_threshold",
std::vector<std::string>{"0.5", "0.75", "1.0"});
options_tbl.emplace("blob_compaction_readahead_size",
std::vector<std::string>{"0", "1M", "4M"});
Make it possible to enable blob files starting from a certain LSM tree level (#10077) Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-03 03:04:33 +00:00
options_tbl.emplace("blob_file_starting_level",
std::vector<std::string>{"0", "1", "2"});
options_tbl.emplace("prepopulate_blob_cache",
std::vector<std::string>{"kDisable", "kFlushOnly"});
}
if (FLAGS_bloom_before_level != INT_MAX) {
// Can modify RibbonFilterPolicy field
options_tbl.emplace("table_factory.filter_policy.bloom_before_level",
std::vector<std::string>{"-1", "0", "1", "2",
"2147483646", "2147483647"});
}
options_table_ = std::move(options_tbl);
for (const auto& iter : options_table_) {
options_index_.push_back(iter.first);
}
return true;
}
void StressTest::InitDb(SharedState* shared) {
uint64_t now = clock_->NowMicros();
fprintf(stdout, "%s Initializing db_stress\n",
clock_->TimeToString(now / 1000000).c_str());
PrintEnv();
Open(shared);
BuildOptionsTable();
}
void StressTest::FinishInitDb(SharedState* shared) {
if (FLAGS_read_only) {
uint64_t now = clock_->NowMicros();
fprintf(stdout, "%s Preloading db with %" PRIu64 " KVs\n",
clock_->TimeToString(now / 1000000).c_str(), FLAGS_max_key);
PreloadDbAndReopenAsReadOnly(FLAGS_max_key, shared);
}
Fix unsynced data loss correctness test with mixed `-test_batches_snapshots` (#9302) Summary: This fixes two bugs in the recently committed DB verification following crash-recovery with unsynced data loss (https://github.com/facebook/rocksdb/issues/8966): The first bug was in crash test runs involving mixed values for `-test_batches_snapshots`. The problem was we were neither restoring expected values nor enabling tracing when `-test_batches_snapshots=1`. This caused a future `-test_batches_snapshots=0` run to not find enough trace data to restore expected values. The fix is to restore expected values at the start of `-test_batches_snapshots=1` runs, but still leave tracing disabled as we do not need to track those KVs. The second bug was in `db_stress` runs that restore the expected values file and use compaction filter. The compaction filter was initialized to use the pre-restore expected values, which would be `munmap()`'d during `FileExpectedStateManager::Restore()`. Then compaction filter would run into a segfault. The fix is just to reorder compaction filter init after expected values restore. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9302 Test Plan: - To verify the first problem, the below sequence used to fail; now it passes. ``` $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=1 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 ``` - The second problem occurred rarely in the form of a SIGSEGV on a file that was `munmap()`d. I have not seen it after this PR though this doesn't prove much. Reviewed By: jay-zhuang Differential Revision: D33155283 Pulled By: ajkr fbshipit-source-id: 66fd0f0edf34015a010c30015f14f104734e964e
2021-12-18 06:04:05 +00:00
if (shared->HasHistory()) {
// The way it works right now is, if there's any history, that means the
// previous run mutating the DB had all its operations traced, in which case
// we should always be able to `Restore()` the expected values to match the
// `db_`'s current seqno.
Status s = shared->Restore(db_);
if (!s.ok()) {
fprintf(stderr, "Error restoring historical expected values: %s\n",
s.ToString().c_str());
exit(1);
}
}
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
if (FLAGS_use_txn && !FLAGS_use_optimistic_txn) {
Support WriteCommit policy with sync_fault_injection=1 (#10624) Summary: **Context:** Prior to this PR, correctness testing with un-sync data loss [disabled](https://github.com/facebook/rocksdb/pull/10605) transaction (`use_txn=1`) thus all of the `txn_write_policy` . This PR improved that by adding support for one policy - WriteCommit (`txn_write_policy=0`). **Summary:** They key to this support is (a) handle Mark{Begin, End}Prepare/MarkCommit/MarkRollback in constructing ExpectedState under WriteCommit policy correctly and (b) monitor CI jobs and solve any test incompatibility issue till jobs are stable. (b) will be part of the test plan. For (a) - During prepare (i.e, between `MarkBeginPrepare()` and `MarkEndPrepare(xid)`), `ExpectedStateTraceRecordHandler` will buffer all writes by adding all writes to an internal `WriteBatch`. - On `MarkEndPrepare()`, that `WriteBatch` will be associated with the transaction's `xid`. - During the commit (i.e, on `MarkCommit(xid)`), `ExpectedStateTraceRecordHandler` will retrieve and iterate the internal `WriteBatch` and finally apply those writes to `ExpectedState` - During the rollback (i.e, on `MarkRollback(xid)`), `ExpectedStateTraceRecordHandler` will erase the internal `WriteBatch` from the map. For (b) - one major issue described below: - TransactionsDB in db stress recovers prepared-but-not-committed txns from the previous crashed run by randomly committing or rolling back it at the start of the current run, see a historical [PR](https://github.com/facebook/rocksdb/commit/6d06be22c083ccf185fd38dba49fde73b644b4c1) predated correctness testing. - And we will verify those processed keys in a recovered db against their expected state. - However since now we turn on `sync_fault_injection=1` where the expected state is constructed from the trace instead of using the LATEST.state from previous run. The expected state now used to verify those processed keys won't contain UNKNOWN_SENTINEL as they should - see test 1 for a failed case. - Therefore, we decided to manually update its expected state to be UNKNOWN_SENTINEL as part of the processing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10624 Test Plan: 1. Test exposed the major issue described above. This test will fail without setting UNKNOWN_SENTINEL in expected state during the processing and pass after ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected dbt=$db.tmp expt=$exp.tmp rm -rf $db $exp mkdir -p $exp echo "RUN 1" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 2" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 3" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 2. Manual testing to ensure ExpectedState is constructed correctly during recovery by verifying it against previously crashed TransactionDB's WAL. - Run the following command to crash a TransactionDB with WriteCommit policy. Then `./ldb dump_wal` on its WAL file ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected rm -rf $db $exp mkdir -p $exp ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 30 kill $pid sleep 1 ``` - Run the following command to verify recovery of the crashed db under debugger. Compare the step-wise result with WAL records (e.g, WriteBatch content, xid, prepare/commit/rollback marker) ``` ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 3. Automatic testing by triggering all RocksDB stress/crash test jobs for 3 rounds with no failure. Reviewed By: ajkr, riversand963 Differential Revision: D39199373 Pulled By: hx235 fbshipit-source-id: 7a1dec0e3e2ee6ea86ddf5dd19ceb5543a3d6f0c
2022-09-27 01:01:59 +00:00
// It's OK here without sync because unsynced data cannot be lost at this
// point
// - even with sync_fault_injection=1 as the
// file is still directly writable until after FinishInitDb()
ProcessRecoveredPreparedTxns(shared);
}
Fix unsynced data loss correctness test with mixed `-test_batches_snapshots` (#9302) Summary: This fixes two bugs in the recently committed DB verification following crash-recovery with unsynced data loss (https://github.com/facebook/rocksdb/issues/8966): The first bug was in crash test runs involving mixed values for `-test_batches_snapshots`. The problem was we were neither restoring expected values nor enabling tracing when `-test_batches_snapshots=1`. This caused a future `-test_batches_snapshots=0` run to not find enough trace data to restore expected values. The fix is to restore expected values at the start of `-test_batches_snapshots=1` runs, but still leave tracing disabled as we do not need to track those KVs. The second bug was in `db_stress` runs that restore the expected values file and use compaction filter. The compaction filter was initialized to use the pre-restore expected values, which would be `munmap()`'d during `FileExpectedStateManager::Restore()`. Then compaction filter would run into a segfault. The fix is just to reorder compaction filter init after expected values restore. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9302 Test Plan: - To verify the first problem, the below sequence used to fail; now it passes. ``` $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=1 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 ``` - The second problem occurred rarely in the form of a SIGSEGV on a file that was `munmap()`d. I have not seen it after this PR though this doesn't prove much. Reviewed By: jay-zhuang Differential Revision: D33155283 Pulled By: ajkr fbshipit-source-id: 66fd0f0edf34015a010c30015f14f104734e964e
2021-12-18 06:04:05 +00:00
if (FLAGS_enable_compaction_filter) {
auto* compaction_filter_factory =
Prefer static_cast in place of most reinterpret_cast (#12308) Summary: The following are risks associated with pointer-to-pointer reinterpret_cast: * Can produce the "wrong result" (crash or memory corruption). IIRC, in theory this can happen for any up-cast or down-cast for a non-standard-layout type, though in practice would only happen for multiple inheritance cases (where the base class pointer might be "inside" the derived object). We don't use multiple inheritance a lot, but we do. * Can mask useful compiler errors upon code change, including converting between unrelated pointer types that you are expecting to be related, and converting between pointer and scalar types unintentionally. I can only think of some obscure cases where static_cast could be troublesome when it compiles as a replacement: * Going through `void*` could plausibly cause unnecessary or broken pointer arithmetic. Suppose we have `struct Derived: public Base1, public Base2`. If we have `Derived*` -> `void*` -> `Base2*` -> `Derived*` through reinterpret casts, this could plausibly work (though technical UB) assuming the `Base2*` is not dereferenced. Changing to static cast could introduce breaking pointer arithmetic. * Unnecessary (but safe) pointer arithmetic could arise in a case like `Derived*` -> `Base2*` -> `Derived*` where before the Base2 pointer might not have been dereferenced. This could potentially affect performance. With some light scripting, I tried replacing pointer-to-pointer reinterpret_casts with static_cast and kept the cases that still compile. Most occurrences of reinterpret_cast have successfully been changed (except for java/ and third-party/). 294 changed, 257 remain. A couple of related interventions included here: * Previously Cache::Handle was not actually derived from in the implementations and just used as a `void*` stand-in with reinterpret_cast. Now there is a relationship to allow static_cast. In theory, this could introduce pointer arithmetic (as described above) but is unlikely without multiple inheritance AND non-empty Cache::Handle. * Remove some unnecessary casts to void* as this is allowed to be implicit (for better or worse). Most of the remaining reinterpret_casts are for converting to/from raw bytes of objects. We could consider better idioms for these patterns in follow-up work. I wish there were a way to implement a template variant of static_cast that would only compile if no pointer arithmetic is generated, but best I can tell, this is not possible. AFAIK the best you could do is a dynamic check that the void* conversion after the static cast is unchanged. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12308 Test Plan: existing tests, CI Reviewed By: ltamasi Differential Revision: D53204947 Pulled By: pdillinger fbshipit-source-id: 9de23e618263b0d5b9820f4e15966876888a16e2
2024-02-07 18:44:11 +00:00
static_cast<DbStressCompactionFilterFactory*>(
Fix unsynced data loss correctness test with mixed `-test_batches_snapshots` (#9302) Summary: This fixes two bugs in the recently committed DB verification following crash-recovery with unsynced data loss (https://github.com/facebook/rocksdb/issues/8966): The first bug was in crash test runs involving mixed values for `-test_batches_snapshots`. The problem was we were neither restoring expected values nor enabling tracing when `-test_batches_snapshots=1`. This caused a future `-test_batches_snapshots=0` run to not find enough trace data to restore expected values. The fix is to restore expected values at the start of `-test_batches_snapshots=1` runs, but still leave tracing disabled as we do not need to track those KVs. The second bug was in `db_stress` runs that restore the expected values file and use compaction filter. The compaction filter was initialized to use the pre-restore expected values, which would be `munmap()`'d during `FileExpectedStateManager::Restore()`. Then compaction filter would run into a segfault. The fix is just to reorder compaction filter init after expected values restore. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9302 Test Plan: - To verify the first problem, the below sequence used to fail; now it passes. ``` $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=1 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 ``` - The second problem occurred rarely in the form of a SIGSEGV on a file that was `munmap()`d. I have not seen it after this PR though this doesn't prove much. Reviewed By: jay-zhuang Differential Revision: D33155283 Pulled By: ajkr fbshipit-source-id: 66fd0f0edf34015a010c30015f14f104734e964e
2021-12-18 06:04:05 +00:00
options_.compaction_filter_factory.get());
assert(compaction_filter_factory);
// This must be called only after any potential `SharedState::Restore()` has
// completed in order for the `compaction_filter_factory` to operate on the
// correct latest values file.
compaction_filter_factory->SetSharedState(shared);
fprintf(stdout, "Compaction filter factory: %s\n",
compaction_filter_factory->Name());
2022-01-31 21:31:00 +00:00
}
}
void StressTest::TrackExpectedState(SharedState* shared) {
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
// For `FLAGS_manual_wal_flush_one_inWAL`
// data can be lost when `manual_wal_flush_one_in > 0` and `FlushWAL()` is not
// explictly called by users of RocksDB (in our case, db stress).
// Therefore recovery from such potential WAL data loss is a prefix recovery
// that requires tracing
if ((FLAGS_sync_fault_injection || FLAGS_disable_wal ||
FLAGS_manual_wal_flush_one_in > 0) &&
IsStateTracked()) {
2022-01-31 21:31:00 +00:00
Status s = shared->SaveAtAndAfter(db_);
if (!s.ok()) {
fprintf(stderr, "Error enabling history tracing: %s\n",
s.ToString().c_str());
exit(1);
}
Fix unsynced data loss correctness test with mixed `-test_batches_snapshots` (#9302) Summary: This fixes two bugs in the recently committed DB verification following crash-recovery with unsynced data loss (https://github.com/facebook/rocksdb/issues/8966): The first bug was in crash test runs involving mixed values for `-test_batches_snapshots`. The problem was we were neither restoring expected values nor enabling tracing when `-test_batches_snapshots=1`. This caused a future `-test_batches_snapshots=0` run to not find enough trace data to restore expected values. The fix is to restore expected values at the start of `-test_batches_snapshots=1` runs, but still leave tracing disabled as we do not need to track those KVs. The second bug was in `db_stress` runs that restore the expected values file and use compaction filter. The compaction filter was initialized to use the pre-restore expected values, which would be `munmap()`'d during `FileExpectedStateManager::Restore()`. Then compaction filter would run into a segfault. The fix is just to reorder compaction filter init after expected values restore. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9302 Test Plan: - To verify the first problem, the below sequence used to fail; now it passes. ``` $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=1 $ ./db_stress --db=./test-db/ --expected_values_dir=./test-db-expected/ --max_key=100000 --ops_per_thread=1000 --sync_fault_injection=1 --clear_column_family_one_in=0 --destroy_db_initially=0 -reopen=0 -test_batches_snapshots=0 ``` - The second problem occurred rarely in the form of a SIGSEGV on a file that was `munmap()`d. I have not seen it after this PR though this doesn't prove much. Reviewed By: jay-zhuang Differential Revision: D33155283 Pulled By: ajkr fbshipit-source-id: 66fd0f0edf34015a010c30015f14f104734e964e
2021-12-18 06:04:05 +00:00
}
}
Status StressTest::AssertSame(DB* db, ColumnFamilyHandle* cf,
ThreadState::SnapshotState& snap_state) {
Status s;
if (cf->GetName() != snap_state.cf_at_name) {
return s;
}
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
// This `ReadOptions` is for validation purposes. Ignore
// `FLAGS_rate_limit_user_ops` to avoid slowing any validation.
ReadOptions ropt;
ropt.snapshot = snap_state.snapshot;
Slice ts;
if (!snap_state.timestamp.empty()) {
ts = snap_state.timestamp;
ropt.timestamp = &ts;
}
PinnableSlice exp_v(&snap_state.value);
exp_v.PinSelf();
PinnableSlice v;
s = db->Get(ropt, cf, snap_state.key, &v);
if (!s.ok() && !s.IsNotFound()) {
Add initial support to stress test persist_user_defined_timestamps (#12124) Summary: This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs. This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably: 1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up. 2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that. 3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124 Test Plan: running multiple flavor of this test on continuous run for sometime before checkin Reviewed By: ltamasi Differential Revision: D51916267 Pulled By: jowlyzhang fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
2023-12-12 17:35:29 +00:00
// When `persist_user_defined_timestamps` is false, a repeated read with
// both a read timestamp and an explicitly taken snapshot cannot guarantee
// consistent result all the time. When it cannot return consistent result,
// it will return an `InvalidArgument` status.
if (s.IsInvalidArgument() && !FLAGS_persist_user_defined_timestamps) {
return Status::OK();
}
return s;
}
if (snap_state.status != s) {
return Status::Corruption(
"The snapshot gave inconsistent results for key " +
std::to_string(Hash(snap_state.key.c_str(), snap_state.key.size(), 0)) +
" in cf " + cf->GetName() + ": (" + snap_state.status.ToString() +
") vs. (" + s.ToString() + ")");
}
if (s.ok()) {
if (exp_v != v) {
return Status::Corruption("The snapshot gave inconsistent values: (" +
exp_v.ToString() + ") vs. (" + v.ToString() +
")");
}
}
if (snap_state.key_vec != nullptr) {
// When `prefix_extractor` is set, seeking to beginning and scanning
// across prefixes are only supported with `total_order_seek` set.
ropt.total_order_seek = true;
std::unique_ptr<Iterator> iterator(db->NewIterator(ropt));
std::unique_ptr<std::vector<bool>> tmp_bitvec(
new std::vector<bool>(FLAGS_max_key));
for (iterator->SeekToFirst(); iterator->Valid(); iterator->Next()) {
uint64_t key_val;
if (GetIntVal(iterator->key().ToString(), &key_val)) {
(*tmp_bitvec.get())[key_val] = true;
}
}
if (!std::equal(snap_state.key_vec->begin(), snap_state.key_vec->end(),
tmp_bitvec.get()->begin())) {
return Status::Corruption("Found inconsistent keys at this snapshot");
}
}
return Status::OK();
}
void StressTest::ProcessStatus(SharedState* shared, std::string opname,
Status s) const {
if (s.ok()) {
return;
}
if (!s.IsIOError() || !std::strstr(s.getState(), "injected")) {
std::ostringstream oss;
oss << opname << " failed: " << s.ToString();
VerificationAbort(shared, oss.str());
assert(false);
}
fprintf(stdout, "%s failed: %s\n", opname.c_str(), s.ToString().c_str());
}
void StressTest::VerificationAbort(SharedState* shared, std::string msg) const {
fprintf(stderr, "Verification failed: %s\n", msg.c_str());
shared->SetVerificationFailure();
}
void StressTest::VerificationAbort(SharedState* shared, std::string msg, int cf,
int64_t key) const {
auto key_str = Key(key);
Slice key_slice = key_str;
fprintf(stderr,
"Verification failed for column family %d key %s (%" PRIi64 "): %s\n",
cf, key_slice.ToString(true).c_str(), key, msg.c_str());
shared->SetVerificationFailure();
}
void StressTest::VerificationAbort(SharedState* shared, std::string msg, int cf,
int64_t key, Slice value_from_db,
Slice value_from_expected) const {
auto key_str = Key(key);
fprintf(stderr,
"Verification failed for column family %d key %s (%" PRIi64
"): value_from_db: %s, value_from_expected: %s, msg: %s\n",
cf, Slice(key_str).ToString(true).c_str(), key,
value_from_db.ToString(true).c_str(),
value_from_expected.ToString(true).c_str(), msg.c_str());
shared->SetVerificationFailure();
}
void StressTest::VerificationAbort(SharedState* shared, int cf, int64_t key,
const Slice& value,
const WideColumns& columns) const {
assert(shared);
auto key_str = Key(key);
fprintf(stderr,
"Verification failed for column family %d key %s (%" PRIi64
"): Value and columns inconsistent: value: %s, columns: %s\n",
cf, Slice(key_str).ToString(/* hex */ true).c_str(), key,
value.ToString(/* hex */ true).c_str(),
WideColumnsToHex(columns).c_str());
shared->SetVerificationFailure();
}
std::string StressTest::DebugString(const Slice& value,
const WideColumns& columns) {
std::ostringstream oss;
oss << "value: " << value.ToString(/* hex */ true)
<< ", columns: " << WideColumnsToHex(columns);
return oss.str();
}
void StressTest::PrintStatistics() {
if (dbstats) {
fprintf(stdout, "STATISTICS:\n%s\n", dbstats->ToString().c_str());
}
if (dbstats_secondaries) {
fprintf(stdout, "Secondary instances STATISTICS:\n%s\n",
dbstats_secondaries->ToString().c_str());
}
}
// Currently PreloadDb has to be single-threaded.
void StressTest::PreloadDbAndReopenAsReadOnly(int64_t number_of_keys,
SharedState* shared) {
WriteOptions write_opts;
write_opts.disableWAL = FLAGS_disable_wal;
if (FLAGS_sync) {
write_opts.sync = true;
}
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
if (FLAGS_rate_limit_auto_wal_flush) {
write_opts.rate_limiter_priority = Env::IO_USER;
}
char value[100];
int cf_idx = 0;
Status s;
for (auto cfh : column_families_) {
for (int64_t k = 0; k != number_of_keys; ++k) {
Add the PutEntity API to the stress/crash tests (#10760) Summary: The patch adds the `PutEntity` API to the non-batched, batched, and CF consistency stress tests. Namely, when the new `db_stress` command line parameter `use_put_entity_one_in` is greater than zero, one in N writes on average is performed using `PutEntity` rather than `Put`. The wide-column entity written has the generated value in its default column; in addition, it contains up to three additional columns where the original generated value is divided up between the column name and the column value (with the column name containing the first k characters of the generated value, and the column value containing the rest). Whether `PutEntity` is used (and if so, how many columns the entity has) is completely determined by the "value base" used to generate the value (that is, there is no randomness involved). Assuming the same `use_put_entity_one_in` setting is used across `db_stress` invocations, this enables us to reconstruct and validate the entity during subsequent `db_stress` runs. Note that `PutEntity` is currently incompatible with `Merge`, transactions, and user-defined timestamps; these combinations are currently disabled/disallowed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760 Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script. Reviewed By: riversand963 Differential Revision: D39939032 Pulled By: ltamasi fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
2022-09-30 18:11:07 +00:00
const std::string key = Key(k);
Support parallel read and write/delete to same key in NonBatchedOpsStressTest (#11058) Summary: **Context:** Current `NonBatchedOpsStressTest` does not allow multi-thread read (i.e, Get, Iterator) and write (i.e, Put, Merge) or delete to the same key. Every read or write/delete operation will acquire lock (`GetLocksForKeyRange`) on the target key to gain exclusive access to it. This does not align with RocksDB's nature of allowing multi-thread read and write/delete to the same key, that is concurrent threads can issue read/write/delete to RocksDB without external locking. Therefore this is a gap in our testing coverage. To close the gap, biggest challenge remains in verifying db value against expected state in presence of parallel read and write/delete. The challenge is due to read/write/delete to the db and read/write to expected state is not within one atomic operation. Therefore we may not know the exact expected state of a certain db read, as by the time we read the expected state for that db read, another write to expected state for another db write to the same key might have changed the expected state. **Summary:** Credited to ajkr's idea, we now solve this challenge by breaking the 32-bits expected value of a key into different parts that can be read and write to in parallel. Basically we divide the 32-bits expected value into `value_base` (corresponding to the previous whole 32 bits but now with some shrinking in the value base range we allow), `pending_write` (i.e, whether there is an ongoing concurrent write), `del_counter` (i.e, number of times a value has been deleted, analogous to value_base for write), `pending_delete` (similar to pending_write) and `deleted` (i.e whether a key is deleted). Also, we need to use incremental `value_base` instead of random value base as before because we want to control the range of value base a correct db read result can possibly be in presence of parallel read and write. In that way, we can verify the correctness of the read against expected state more easily. This is at the cost of reducing the randomness of the value generated in NonBatchedOpsStressTest we are willing to accept. (For detailed algorithm of how to use these parts to infer expected state of a key, see the PR) Misc: hide value_base detail from callers of ExpectedState by abstracting related logics into ExpectedValue class Pull Request resolved: https://github.com/facebook/rocksdb/pull/11058 Test Plan: - Manual test of small number of keys (i.e, high chances of parallel read and write/delete to same key) with equally distributed read/write/deleted for 30 min ``` python3 tools/db_crashtest.py --simple {blackbox|whitebox} --sync_fault_injection=1 --skip_verifydb=0 --continuous_verification_interval=1000 --clear_column_family_one_in=0 --max_key=10 --column_families=1 --threads=32 --readpercent=25 --writepercent=25 --nooverwritepercent=0 --iterpercent=25 --verify_iterator_with_expected_state_one_in=1 --num_iterations=5 --delpercent=15 --delrangepercent=10 --range_deletion_width=5 --use_merge={0|1} --use_put_entity_one_in=0 --use_txn=0 --verify_before_write=0 --user_timestamp_size=0 --compact_files_one_in=1000 --compact_range_one_in=1000 --flush_one_in=1000 --get_property_one_in=1000 --ingest_external_file_one_in=100 --backup_one_in=100 --checkpoint_one_in=100 --approximate_size_one_in=0 --acquire_snapshot_one_in=100 --use_multiget=0 --prefixpercent=0 --get_live_files_one_in=1000 --manual_wal_flush_one_in=1000 --pause_background_one_in=1000 --target_file_size_base=524288 --write_buffer_size=524288 --verify_checksum_one_in=1000 --verify_db_one_in=1000 ``` - Rehearsal stress test for normal parameter and aggressive parameter to see if such change can find what existing stress test can find (i.e, no regression in testing capability) - [Ongoing]Try to find new bugs with this change that are not found by current NonBatchedOpsStressTest with no parallel read and write/delete to same key Reviewed By: ajkr Differential Revision: D42257258 Pulled By: hx235 fbshipit-source-id: e6fdc18f1fad3753e5ac91731483a644d9b5b6eb
2023-05-15 22:34:22 +00:00
PendingExpectedValue pending_expected_value =
shared->PreparePut(cf_idx, k);
const uint32_t value_base = pending_expected_value.GetFinalValueBase();
Add the PutEntity API to the stress/crash tests (#10760) Summary: The patch adds the `PutEntity` API to the non-batched, batched, and CF consistency stress tests. Namely, when the new `db_stress` command line parameter `use_put_entity_one_in` is greater than zero, one in N writes on average is performed using `PutEntity` rather than `Put`. The wide-column entity written has the generated value in its default column; in addition, it contains up to three additional columns where the original generated value is divided up between the column name and the column value (with the column name containing the first k characters of the generated value, and the column value containing the rest). Whether `PutEntity` is used (and if so, how many columns the entity has) is completely determined by the "value base" used to generate the value (that is, there is no randomness involved). Assuming the same `use_put_entity_one_in` setting is used across `db_stress` invocations, this enables us to reconstruct and validate the entity during subsequent `db_stress` runs. Note that `PutEntity` is currently incompatible with `Merge`, transactions, and user-defined timestamps; these combinations are currently disabled/disallowed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760 Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script. Reviewed By: riversand963 Differential Revision: D39939032 Pulled By: ltamasi fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
2022-09-30 18:11:07 +00:00
const size_t sz = GenerateValue(value_base, value, sizeof(value));
const Slice v(value, sz);
std::string ts;
if (FLAGS_user_timestamp_size > 0) {
ts = GetNowNanos();
}
if (FLAGS_use_put_entity_one_in > 0 &&
(value_base % FLAGS_use_put_entity_one_in) == 0) {
s = db_->PutEntity(write_opts, cfh, key,
GenerateWideColumns(value_base, v));
} else if (FLAGS_use_merge) {
if (!FLAGS_use_txn) {
if (FLAGS_user_timestamp_size > 0) {
s = db_->Merge(write_opts, cfh, key, ts, v);
} else {
s = db_->Merge(write_opts, cfh, key, v);
}
} else {
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = ExecuteTransaction(
write_opts, /*thread=*/nullptr,
[&](Transaction& txn) { return txn.Merge(cfh, key, v); });
}
} else {
if (!FLAGS_use_txn) {
if (FLAGS_user_timestamp_size > 0) {
Revise APIs related to user-defined timestamp (#8946) Summary: ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`. Namely, `WriteOptions` should not include information about "what-to-write", but should just include information about "how-to-write". According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore, this PR removes `WriteOptions::timestamp` for compliance. After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and `SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity made me reconsider doing it in another PR (maybe). For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take extra `timestamp` information when writing to `WriteBatch`es. These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list. Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to `WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps allocated already and multiple timestamps can be updated. The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp size of the default column family. This will be used to allocate space when calling APIs that do not specify a column family handle. Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing some assertions about timestamp to returning Status code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946 Test Plan: make check ./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8 ./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0 Make sure there is no perf regression by running the following ``` ./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom ``` Before this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s ``` After this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s ``` Reviewed By: ltamasi Differential Revision: D33721359 Pulled By: riversand963 fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
2022-02-02 06:17:46 +00:00
s = db_->Put(write_opts, cfh, key, ts, v);
} else {
s = db_->Put(write_opts, cfh, key, v);
}
} else {
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = ExecuteTransaction(
write_opts, /*thread=*/nullptr,
[&](Transaction& txn) { return txn.Put(cfh, key, v); });
}
}
if (!s.ok()) {
Fix backup/checkpoint stress test failure (#12227) Summary: This PR fixes this type of stress test failure that could happen in either checkpoint or backup. Example failure messages are like this: `Failure in a backup/restore operation with: Corruption: 0x00000000000001D5000000000000012B00000000000000FD exists in original db but not in restore` `A checkpoint operation failed with: Corruption: 0x0000000000000365000000000000012B0000000000000067 exists in original db but not in checkpoint /...` The internal task has an example test command to quickly reproduce this type of error. The common symptom of these test failures are these expected keys do not exist in the original db either. The root cause is `TestCheckpoint` and `TestBackupRestore` both use the expected state as a proxy for the state of the original db when it comes to check a key's existence. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/db_stress_test_base.cc#L1838 This `ExpectedState::Exists` API returns true if a key has a pending write, such as a pending put. In usual case, this pending put should either soon materialize to an actual write when `PendingExpectedValue::Commit` is called to reflect a successful write to the DB, or test should be safely terminated if write to DB fails. All of which happens while a key is locked. So checkpoint and backup usually won't see the discrepancy between db and expected state caused by pending writes. However, the external file ingestion test currently has a path that will proceed the test after a failed ingestion caused by injected errors, leaving the pending put in the expected state. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/no_batched_ops_stress.cc#L1577-L1589 I think a proper and future proof fix for this is to explicitly rollback a pending state when a db write operation failed so that expected state do not diverge from db in the first place. I added a `PendingExpectedValue::Rollback` API so that we don't implicitly depend on thread termination to prevent test failures. Another place that could cause same divergence as external file ingestion is `PreloadDbAndReopenAsReadOnly`. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/db_stress_test_base.cc#L616-L619 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12227 Reviewed By: hx235 Differential Revision: D52705470 Pulled By: jowlyzhang fbshipit-source-id: b21586b037caeeba29a2cff8c2fdc6f1d0bda9cf
2024-01-16 21:28:51 +00:00
pending_expected_value.Rollback();
break;
}
Fix backup/checkpoint stress test failure (#12227) Summary: This PR fixes this type of stress test failure that could happen in either checkpoint or backup. Example failure messages are like this: `Failure in a backup/restore operation with: Corruption: 0x00000000000001D5000000000000012B00000000000000FD exists in original db but not in restore` `A checkpoint operation failed with: Corruption: 0x0000000000000365000000000000012B0000000000000067 exists in original db but not in checkpoint /...` The internal task has an example test command to quickly reproduce this type of error. The common symptom of these test failures are these expected keys do not exist in the original db either. The root cause is `TestCheckpoint` and `TestBackupRestore` both use the expected state as a proxy for the state of the original db when it comes to check a key's existence. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/db_stress_test_base.cc#L1838 This `ExpectedState::Exists` API returns true if a key has a pending write, such as a pending put. In usual case, this pending put should either soon materialize to an actual write when `PendingExpectedValue::Commit` is called to reflect a successful write to the DB, or test should be safely terminated if write to DB fails. All of which happens while a key is locked. So checkpoint and backup usually won't see the discrepancy between db and expected state caused by pending writes. However, the external file ingestion test currently has a path that will proceed the test after a failed ingestion caused by injected errors, leaving the pending put in the expected state. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/no_batched_ops_stress.cc#L1577-L1589 I think a proper and future proof fix for this is to explicitly rollback a pending state when a db write operation failed so that expected state do not diverge from db in the first place. I added a `PendingExpectedValue::Rollback` API so that we don't implicitly depend on thread termination to prevent test failures. Another place that could cause same divergence as external file ingestion is `PreloadDbAndReopenAsReadOnly`. https://github.com/facebook/rocksdb/blob/0758271d519bcc5d7266fec26ae1f3ab887aa130/db_stress_tool/db_stress_test_base.cc#L616-L619 Pull Request resolved: https://github.com/facebook/rocksdb/pull/12227 Reviewed By: hx235 Differential Revision: D52705470 Pulled By: jowlyzhang fbshipit-source-id: b21586b037caeeba29a2cff8c2fdc6f1d0bda9cf
2024-01-16 21:28:51 +00:00
pending_expected_value.Commit();
}
if (!s.ok()) {
break;
}
++cf_idx;
}
if (s.ok()) {
s = db_->Flush(FlushOptions(), column_families_);
}
if (s.ok()) {
for (auto cf : column_families_) {
delete cf;
}
column_families_.clear();
delete db_;
db_ = nullptr;
txn_db_ = nullptr;
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
optimistic_txn_db_ = nullptr;
db_preload_finished_.store(true);
auto now = clock_->NowMicros();
fprintf(stdout, "%s Reopening database in read-only\n",
clock_->TimeToString(now / 1000000).c_str());
// Reopen as read-only, can ignore all options related to updates
Open(shared);
} else {
fprintf(stderr, "Failed to preload db");
exit(1);
}
}
Status StressTest::SetOptions(ThreadState* thread) {
assert(FLAGS_set_options_one_in > 0);
std::unordered_map<std::string, std::string> opts;
std::string name =
options_index_[thread->rand.Next() % options_index_.size()];
int value_idx = thread->rand.Next() % options_table_[name].size();
if (name == "level0_file_num_compaction_trigger" ||
name == "level0_slowdown_writes_trigger" ||
name == "level0_stop_writes_trigger") {
opts["level0_file_num_compaction_trigger"] =
options_table_["level0_file_num_compaction_trigger"][value_idx];
opts["level0_slowdown_writes_trigger"] =
options_table_["level0_slowdown_writes_trigger"][value_idx];
opts["level0_stop_writes_trigger"] =
options_table_["level0_stop_writes_trigger"][value_idx];
} else {
opts[name] = options_table_[name][value_idx];
}
int rand_cf_idx = thread->rand.Next() % FLAGS_column_families;
auto cfh = column_families_[rand_cf_idx];
return db_->SetOptions(cfh, opts);
}
Support WriteCommit policy with sync_fault_injection=1 (#10624) Summary: **Context:** Prior to this PR, correctness testing with un-sync data loss [disabled](https://github.com/facebook/rocksdb/pull/10605) transaction (`use_txn=1`) thus all of the `txn_write_policy` . This PR improved that by adding support for one policy - WriteCommit (`txn_write_policy=0`). **Summary:** They key to this support is (a) handle Mark{Begin, End}Prepare/MarkCommit/MarkRollback in constructing ExpectedState under WriteCommit policy correctly and (b) monitor CI jobs and solve any test incompatibility issue till jobs are stable. (b) will be part of the test plan. For (a) - During prepare (i.e, between `MarkBeginPrepare()` and `MarkEndPrepare(xid)`), `ExpectedStateTraceRecordHandler` will buffer all writes by adding all writes to an internal `WriteBatch`. - On `MarkEndPrepare()`, that `WriteBatch` will be associated with the transaction's `xid`. - During the commit (i.e, on `MarkCommit(xid)`), `ExpectedStateTraceRecordHandler` will retrieve and iterate the internal `WriteBatch` and finally apply those writes to `ExpectedState` - During the rollback (i.e, on `MarkRollback(xid)`), `ExpectedStateTraceRecordHandler` will erase the internal `WriteBatch` from the map. For (b) - one major issue described below: - TransactionsDB in db stress recovers prepared-but-not-committed txns from the previous crashed run by randomly committing or rolling back it at the start of the current run, see a historical [PR](https://github.com/facebook/rocksdb/commit/6d06be22c083ccf185fd38dba49fde73b644b4c1) predated correctness testing. - And we will verify those processed keys in a recovered db against their expected state. - However since now we turn on `sync_fault_injection=1` where the expected state is constructed from the trace instead of using the LATEST.state from previous run. The expected state now used to verify those processed keys won't contain UNKNOWN_SENTINEL as they should - see test 1 for a failed case. - Therefore, we decided to manually update its expected state to be UNKNOWN_SENTINEL as part of the processing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10624 Test Plan: 1. Test exposed the major issue described above. This test will fail without setting UNKNOWN_SENTINEL in expected state during the processing and pass after ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected dbt=$db.tmp expt=$exp.tmp rm -rf $db $exp mkdir -p $exp echo "RUN 1" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 2" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 3" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 2. Manual testing to ensure ExpectedState is constructed correctly during recovery by verifying it against previously crashed TransactionDB's WAL. - Run the following command to crash a TransactionDB with WriteCommit policy. Then `./ldb dump_wal` on its WAL file ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected rm -rf $db $exp mkdir -p $exp ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 30 kill $pid sleep 1 ``` - Run the following command to verify recovery of the crashed db under debugger. Compare the step-wise result with WAL records (e.g, WriteBatch content, xid, prepare/commit/rollback marker) ``` ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 3. Automatic testing by triggering all RocksDB stress/crash test jobs for 3 rounds with no failure. Reviewed By: ajkr, riversand963 Differential Revision: D39199373 Pulled By: hx235 fbshipit-source-id: 7a1dec0e3e2ee6ea86ddf5dd19ceb5543a3d6f0c
2022-09-27 01:01:59 +00:00
void StressTest::ProcessRecoveredPreparedTxns(SharedState* shared) {
assert(txn_db_);
std::vector<Transaction*> recovered_prepared_trans;
txn_db_->GetAllPreparedTransactions(&recovered_prepared_trans);
for (Transaction* txn : recovered_prepared_trans) {
ProcessRecoveredPreparedTxnsHelper(txn, shared);
delete txn;
}
recovered_prepared_trans.clear();
txn_db_->GetAllPreparedTransactions(&recovered_prepared_trans);
assert(recovered_prepared_trans.size() == 0);
}
void StressTest::ProcessRecoveredPreparedTxnsHelper(Transaction* txn,
SharedState* shared) {
thread_local Random rand(static_cast<uint32_t>(FLAGS_seed));
for (size_t i = 0; i < column_families_.size(); ++i) {
std::unique_ptr<WBWIIterator> wbwi_iter(
txn->GetWriteBatch()->NewIterator(column_families_[i]));
for (wbwi_iter->SeekToFirst(); wbwi_iter->Valid(); wbwi_iter->Next()) {
uint64_t key_val;
if (GetIntVal(wbwi_iter->Entry().key.ToString(), &key_val)) {
Support parallel read and write/delete to same key in NonBatchedOpsStressTest (#11058) Summary: **Context:** Current `NonBatchedOpsStressTest` does not allow multi-thread read (i.e, Get, Iterator) and write (i.e, Put, Merge) or delete to the same key. Every read or write/delete operation will acquire lock (`GetLocksForKeyRange`) on the target key to gain exclusive access to it. This does not align with RocksDB's nature of allowing multi-thread read and write/delete to the same key, that is concurrent threads can issue read/write/delete to RocksDB without external locking. Therefore this is a gap in our testing coverage. To close the gap, biggest challenge remains in verifying db value against expected state in presence of parallel read and write/delete. The challenge is due to read/write/delete to the db and read/write to expected state is not within one atomic operation. Therefore we may not know the exact expected state of a certain db read, as by the time we read the expected state for that db read, another write to expected state for another db write to the same key might have changed the expected state. **Summary:** Credited to ajkr's idea, we now solve this challenge by breaking the 32-bits expected value of a key into different parts that can be read and write to in parallel. Basically we divide the 32-bits expected value into `value_base` (corresponding to the previous whole 32 bits but now with some shrinking in the value base range we allow), `pending_write` (i.e, whether there is an ongoing concurrent write), `del_counter` (i.e, number of times a value has been deleted, analogous to value_base for write), `pending_delete` (similar to pending_write) and `deleted` (i.e whether a key is deleted). Also, we need to use incremental `value_base` instead of random value base as before because we want to control the range of value base a correct db read result can possibly be in presence of parallel read and write. In that way, we can verify the correctness of the read against expected state more easily. This is at the cost of reducing the randomness of the value generated in NonBatchedOpsStressTest we are willing to accept. (For detailed algorithm of how to use these parts to infer expected state of a key, see the PR) Misc: hide value_base detail from callers of ExpectedState by abstracting related logics into ExpectedValue class Pull Request resolved: https://github.com/facebook/rocksdb/pull/11058 Test Plan: - Manual test of small number of keys (i.e, high chances of parallel read and write/delete to same key) with equally distributed read/write/deleted for 30 min ``` python3 tools/db_crashtest.py --simple {blackbox|whitebox} --sync_fault_injection=1 --skip_verifydb=0 --continuous_verification_interval=1000 --clear_column_family_one_in=0 --max_key=10 --column_families=1 --threads=32 --readpercent=25 --writepercent=25 --nooverwritepercent=0 --iterpercent=25 --verify_iterator_with_expected_state_one_in=1 --num_iterations=5 --delpercent=15 --delrangepercent=10 --range_deletion_width=5 --use_merge={0|1} --use_put_entity_one_in=0 --use_txn=0 --verify_before_write=0 --user_timestamp_size=0 --compact_files_one_in=1000 --compact_range_one_in=1000 --flush_one_in=1000 --get_property_one_in=1000 --ingest_external_file_one_in=100 --backup_one_in=100 --checkpoint_one_in=100 --approximate_size_one_in=0 --acquire_snapshot_one_in=100 --use_multiget=0 --prefixpercent=0 --get_live_files_one_in=1000 --manual_wal_flush_one_in=1000 --pause_background_one_in=1000 --target_file_size_base=524288 --write_buffer_size=524288 --verify_checksum_one_in=1000 --verify_db_one_in=1000 ``` - Rehearsal stress test for normal parameter and aggressive parameter to see if such change can find what existing stress test can find (i.e, no regression in testing capability) - [Ongoing]Try to find new bugs with this change that are not found by current NonBatchedOpsStressTest with no parallel read and write/delete to same key Reviewed By: ajkr Differential Revision: D42257258 Pulled By: hx235 fbshipit-source-id: e6fdc18f1fad3753e5ac91731483a644d9b5b6eb
2023-05-15 22:34:22 +00:00
shared->SyncPendingPut(static_cast<int>(i) /* cf_idx */, key_val);
Support WriteCommit policy with sync_fault_injection=1 (#10624) Summary: **Context:** Prior to this PR, correctness testing with un-sync data loss [disabled](https://github.com/facebook/rocksdb/pull/10605) transaction (`use_txn=1`) thus all of the `txn_write_policy` . This PR improved that by adding support for one policy - WriteCommit (`txn_write_policy=0`). **Summary:** They key to this support is (a) handle Mark{Begin, End}Prepare/MarkCommit/MarkRollback in constructing ExpectedState under WriteCommit policy correctly and (b) monitor CI jobs and solve any test incompatibility issue till jobs are stable. (b) will be part of the test plan. For (a) - During prepare (i.e, between `MarkBeginPrepare()` and `MarkEndPrepare(xid)`), `ExpectedStateTraceRecordHandler` will buffer all writes by adding all writes to an internal `WriteBatch`. - On `MarkEndPrepare()`, that `WriteBatch` will be associated with the transaction's `xid`. - During the commit (i.e, on `MarkCommit(xid)`), `ExpectedStateTraceRecordHandler` will retrieve and iterate the internal `WriteBatch` and finally apply those writes to `ExpectedState` - During the rollback (i.e, on `MarkRollback(xid)`), `ExpectedStateTraceRecordHandler` will erase the internal `WriteBatch` from the map. For (b) - one major issue described below: - TransactionsDB in db stress recovers prepared-but-not-committed txns from the previous crashed run by randomly committing or rolling back it at the start of the current run, see a historical [PR](https://github.com/facebook/rocksdb/commit/6d06be22c083ccf185fd38dba49fde73b644b4c1) predated correctness testing. - And we will verify those processed keys in a recovered db against their expected state. - However since now we turn on `sync_fault_injection=1` where the expected state is constructed from the trace instead of using the LATEST.state from previous run. The expected state now used to verify those processed keys won't contain UNKNOWN_SENTINEL as they should - see test 1 for a failed case. - Therefore, we decided to manually update its expected state to be UNKNOWN_SENTINEL as part of the processing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10624 Test Plan: 1. Test exposed the major issue described above. This test will fail without setting UNKNOWN_SENTINEL in expected state during the processing and pass after ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected dbt=$db.tmp expt=$exp.tmp rm -rf $db $exp mkdir -p $exp echo "RUN 1" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 2" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 0.2 sleep 20 kill $pid sleep 0.2 echo "RUN 3" ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 2. Manual testing to ensure ExpectedState is constructed correctly during recovery by verifying it against previously crashed TransactionDB's WAL. - Run the following command to crash a TransactionDB with WriteCommit policy. Then `./ldb dump_wal` on its WAL file ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected rm -rf $db $exp mkdir -p $exp ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 & pid=$! sleep 30 kill $pid sleep 1 ``` - Run the following command to verify recovery of the crashed db under debugger. Compare the step-wise result with WAL records (e.g, WriteBatch content, xid, prepare/commit/rollback marker) ``` ./db_stress \ --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=0 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --test_batches_snapshots=0 --value_size_mult=32 --writepercent=90 \ --use_txn=1 --txn_write_policy=0 --sync_fault_injection=1 ``` 3. Automatic testing by triggering all RocksDB stress/crash test jobs for 3 rounds with no failure. Reviewed By: ajkr, riversand963 Differential Revision: D39199373 Pulled By: hx235 fbshipit-source-id: 7a1dec0e3e2ee6ea86ddf5dd19ceb5543a3d6f0c
2022-09-27 01:01:59 +00:00
}
}
}
if (rand.OneIn(2)) {
Status s = txn->Commit();
assert(s.ok());
} else {
Status s = txn->Rollback();
assert(s.ok());
}
}
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
Status StressTest::NewTxn(WriteOptions& write_opts,
std::unique_ptr<Transaction>* out_txn) {
if (!FLAGS_use_txn) {
return Status::InvalidArgument("NewTxn when FLAGS_use_txn is not set");
}
Improve stress test for transactions (#9568) Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7
2022-03-17 02:00:04 +00:00
write_opts.disableWAL = FLAGS_disable_wal;
static std::atomic<uint64_t> txn_id = {0};
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
if (FLAGS_use_optimistic_txn) {
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
out_txn->reset(optimistic_txn_db_->BeginTransaction(write_opts));
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
return Status::OK();
} else {
TransactionOptions txn_options;
txn_options.use_only_the_last_commit_time_batch_for_recovery =
FLAGS_use_only_the_last_commit_time_batch_for_recovery;
txn_options.lock_timeout = 600000; // 10 min
txn_options.deadlock_detect = true;
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
out_txn->reset(txn_db_->BeginTransaction(write_opts, txn_options));
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
auto istr = std::to_string(txn_id.fetch_add(1));
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
Status s = (*out_txn)->SetName("xid" + istr);
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
return s;
}
}
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
Status StressTest::CommitTxn(Transaction& txn, ThreadState* thread) {
if (!FLAGS_use_txn) {
return Status::InvalidArgument("CommitTxn when FLAGS_use_txn is not set");
}
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
Status s = Status::OK();
if (FLAGS_use_optimistic_txn) {
assert(optimistic_txn_db_);
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = txn.Commit();
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
} else {
assert(txn_db_);
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = txn.Prepare();
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
std::shared_ptr<const Snapshot> timestamped_snapshot;
if (s.ok()) {
if (thread && FLAGS_create_timestamped_snapshot_one_in &&
thread->rand.OneIn(FLAGS_create_timestamped_snapshot_one_in)) {
uint64_t ts = db_stress_env->NowNanos();
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = txn.CommitAndTryCreateSnapshot(/*notifier=*/nullptr, ts,
&timestamped_snapshot);
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
std::pair<Status, std::shared_ptr<const Snapshot>> res;
if (thread->tid == 0) {
uint64_t now = db_stress_env->NowNanos();
res = txn_db_->CreateTimestampedSnapshot(now);
if (res.first.ok()) {
assert(res.second);
assert(res.second->GetTimestamp() == now);
if (timestamped_snapshot) {
assert(res.second->GetTimestamp() >
timestamped_snapshot->GetTimestamp());
}
} else {
assert(!res.second);
Stop operating on DB in a stress test background thread (#10373) Summary: Stress test background threads do not coordinate with test worker threads for db reopen in the middle of a test run, thus accessing db obj in a stress test bg thread can race with test workers. Remove the TimestampedSnapshotThread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10373 Test Plan: ``` ./db_stress --acquire_snapshot_one_in=0 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 \ --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 \ --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 \ --block_size=16384 --bloom_bits=7.580319535285394 --bottommost_compression_type=disable \ --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache \ --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 \ --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \ --compact_files_one_in=1000000 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=0 \ --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 \ --compression_type=xpress --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 \ --continuous_verification_interval=0 --create_timestamped_snapshot_one_in=20 --data_block_index_type=0 \ --db=/dev/shm/rocksdb/ --db_write_buffer_size=0 --delpercent=5 --delrangepercent=0 --destroy_db_initially=1 \ --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=1 --enable_pipelined_write=0 \ --fail_if_options_file_error=1 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 \ --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \ --get_sorted_wal_files_one_in=0 --index_block_restart_interval=11 --index_type=0 --ingest_external_file_one_in=0 \ --iterpercent=0 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \ --log2_keys_per_lock=10 --long_running_snapshots=0 --mark_for_compaction_one_file_in=10 \ --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 \ --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 \ --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.5 \ --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=0 --mock_direct_io=True \ --nooverwritepercent=1 --open_files=500000 --open_metadata_write_fault_one_in=0 \ --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=20000 \ --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 \ --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=1 \ --prefixpercent=5 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=1000 \ --readpercent=55 --recycle_log_file_num=0 --reopen=100 --ribbon_starting_level=8 \ --secondary_cache_fault_one_in=0 --secondary_cache_uri= --snapshot_hold_ops=100000 \ --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 \ --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 \ --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=1 \ --txn_write_policy=0 --unordered_write=0 --unpartitioned_pinning=0 \ --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=1 --use_full_merge_v1=1 \ --use_merge=1 --use_multiget=0 --use_txn=1 --user_timestamp_size=0 --value_size_mult=32 \ --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 \ --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none \ --write_buffer_size=4194304 --write_dbid_to_manifest=0 --writepercent=35 ``` make crash_test_with_txn make crash_test_with_multiops_wc_txn Reviewed By: jay-zhuang Differential Revision: D37903189 Pulled By: riversand963 fbshipit-source-id: cd1728ad7ba4ce4cf47af23c4f65dda0956744f9
2022-07-19 18:25:43 +00:00
}
}
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
} else {
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
s = txn.Commit();
Stop operating on DB in a stress test background thread (#10373) Summary: Stress test background threads do not coordinate with test worker threads for db reopen in the middle of a test run, thus accessing db obj in a stress test bg thread can race with test workers. Remove the TimestampedSnapshotThread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10373 Test Plan: ``` ./db_stress --acquire_snapshot_one_in=0 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 \ --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 \ --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 \ --block_size=16384 --bloom_bits=7.580319535285394 --bottommost_compression_type=disable \ --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache \ --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 \ --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \ --compact_files_one_in=1000000 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=0 \ --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 \ --compression_type=xpress --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 \ --continuous_verification_interval=0 --create_timestamped_snapshot_one_in=20 --data_block_index_type=0 \ --db=/dev/shm/rocksdb/ --db_write_buffer_size=0 --delpercent=5 --delrangepercent=0 --destroy_db_initially=1 \ --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=1 --enable_pipelined_write=0 \ --fail_if_options_file_error=1 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 \ --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \ --get_sorted_wal_files_one_in=0 --index_block_restart_interval=11 --index_type=0 --ingest_external_file_one_in=0 \ --iterpercent=0 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \ --log2_keys_per_lock=10 --long_running_snapshots=0 --mark_for_compaction_one_file_in=10 \ --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 \ --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 \ --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.5 \ --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=0 --mock_direct_io=True \ --nooverwritepercent=1 --open_files=500000 --open_metadata_write_fault_one_in=0 \ --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=20000 \ --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 \ --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=1 \ --prefixpercent=5 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=1000 \ --readpercent=55 --recycle_log_file_num=0 --reopen=100 --ribbon_starting_level=8 \ --secondary_cache_fault_one_in=0 --secondary_cache_uri= --snapshot_hold_ops=100000 \ --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 \ --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 \ --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=1 \ --txn_write_policy=0 --unordered_write=0 --unpartitioned_pinning=0 \ --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=1 --use_full_merge_v1=1 \ --use_merge=1 --use_multiget=0 --use_txn=1 --user_timestamp_size=0 --value_size_mult=32 \ --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 \ --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none \ --write_buffer_size=4194304 --write_dbid_to_manifest=0 --writepercent=35 ``` make crash_test_with_txn make crash_test_with_multiops_wc_txn Reviewed By: jay-zhuang Differential Revision: D37903189 Pulled By: riversand963 fbshipit-source-id: cd1728ad7ba4ce4cf47af23c4f65dda0956744f9
2022-07-19 18:25:43 +00:00
}
Snapshots with user-specified timestamps (#9879) Summary: In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable. It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29. This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps. Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps. In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot` object is created with the last published sequence number of the super-version. You can see that the reader actually has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called, an arbitrarily long period of time may have already elapsed since the last write, which is when the last published sequence number is written. This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will ensure any two snapshots with timestamps should satisfy the following: ``` snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts ``` If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create a snapshot with associated timestamp. Code example ```cpp // Create a timestamped snapshot when committing transaction. txn->SetCommitTimestamp(100); txn->SetSnapshotOnNextOperation(); txn->Commit(); // A wrapper API for convenience Status Transaction::CommitAndTryCreateSnapshot( std::shared_ptr<TransactionNotifier> notifier, TxnTimestamp ts, std::shared_ptr<const Snapshot>* ret); // Create a timestamped snapshot if caller guarantees no concurrent writes std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100); ``` The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp. ```cpp // Return the timestamped snapshot correponding to given timestamp. If ts is // kMaxTxnTimestamp, then we return the latest timestamped snapshot if present. // Othersise, we return the snapshot whose timestamp is equal to `ts`. If no // such snapshot exists, then we return null. std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const; // Return the latest timestamped snapshot if present. std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const; ``` We also provide two additional APIs for stats collection and reporting purposes. ```cpp Status TransactionDB::GetAllTimestampedSnapshots( std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; // Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`. Status TransactionDB::GetTimestampedSnapshots( TxnTimestamp ts_lb, TxnTimestamp ts_ub, std::vector<std::shared_ptr<const Snapshot>>& snapshots) const; ``` To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release timestamped snapshots whose timestamps are older than or equal to a given threshold. ```cpp void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts); ``` Before shutdown, RocksDB will release all timestamped snapshots. Comparison with user-defined timestamp and how they can be combined: User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile mapping between snapshots (sequence numbers) and timestamps. Different internal keys with the same user key but different timestamps will be treated as different by compaction, thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection. In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent). The timestamped snapshot supports the semantics of reading at an exact point in time. Timestamped snapshots can also be used with user-defined timestamp. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879 Test Plan: ``` make check TEST_TMPDIR=/dev/shm make crash_test_with_txn ``` Reviewed By: siying Differential Revision: D35783919 Pulled By: riversand963 fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
2022-06-10 23:07:03 +00:00
}
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
if (thread && FLAGS_create_timestamped_snapshot_one_in > 0 &&
thread->rand.OneInOpt(50000)) {
uint64_t now = db_stress_env->NowNanos();
constexpr uint64_t time_diff = static_cast<uint64_t>(1000) * 1000 * 1000;
txn_db_->ReleaseTimestampedSnapshotsOlderThan(now - time_diff);
}
Stop operating on DB in a stress test background thread (#10373) Summary: Stress test background threads do not coordinate with test worker threads for db reopen in the middle of a test run, thus accessing db obj in a stress test bg thread can race with test workers. Remove the TimestampedSnapshotThread. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10373 Test Plan: ``` ./db_stress --acquire_snapshot_one_in=0 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 \ --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 \ --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 \ --block_size=16384 --bloom_bits=7.580319535285394 --bottommost_compression_type=disable \ --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache \ --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=0 --charge_filter_construction=1 \ --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kxxHash64 --clear_column_family_one_in=0 \ --compact_files_one_in=1000000 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=0 \ --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 \ --compression_type=xpress --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 \ --continuous_verification_interval=0 --create_timestamped_snapshot_one_in=20 --data_block_index_type=0 \ --db=/dev/shm/rocksdb/ --db_write_buffer_size=0 --delpercent=5 --delrangepercent=0 --destroy_db_initially=1 \ --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=1 --enable_pipelined_write=0 \ --fail_if_options_file_error=1 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 \ --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 \ --get_sorted_wal_files_one_in=0 --index_block_restart_interval=11 --index_type=0 --ingest_external_file_one_in=0 \ --iterpercent=0 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True \ --log2_keys_per_lock=10 --long_running_snapshots=0 --mark_for_compaction_one_file_in=10 \ --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 \ --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 \ --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.5 \ --memtable_whole_key_filtering=1 --memtablerep=skip_list --mmap_read=0 --mock_direct_io=True \ --nooverwritepercent=1 --open_files=500000 --open_metadata_write_fault_one_in=0 \ --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=20000 \ --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 \ --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=1 \ --prefixpercent=5 --prepopulate_block_cache=0 --progress_reports=0 --read_fault_one_in=1000 \ --readpercent=55 --recycle_log_file_num=0 --reopen=100 --ribbon_starting_level=8 \ --secondary_cache_fault_one_in=0 --secondary_cache_uri= --snapshot_hold_ops=100000 \ --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=0 \ --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 \ --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=1 \ --txn_write_policy=0 --unordered_write=0 --unpartitioned_pinning=0 \ --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=1 --use_full_merge_v1=1 \ --use_merge=1 --use_multiget=0 --use_txn=1 --user_timestamp_size=0 --value_size_mult=32 \ --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 \ --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none \ --write_buffer_size=4194304 --write_dbid_to_manifest=0 --writepercent=35 ``` make crash_test_with_txn make crash_test_with_multiops_wc_txn Reviewed By: jay-zhuang Differential Revision: D37903189 Pulled By: riversand963 fbshipit-source-id: cd1728ad7ba4ce4cf47af23c4f65dda0956744f9
2022-07-19 18:25:43 +00:00
}
return s;
}
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
Status StressTest::ExecuteTransaction(
WriteOptions& write_opts, ThreadState* thread,
std::function<Status(Transaction&)>&& ops) {
std::unique_ptr<Transaction> txn;
Status s = NewTxn(write_opts, &txn);
std::string try_again_messages;
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
if (s.ok()) {
for (int tries = 1;; ++tries) {
s = ops(*txn);
if (s.ok()) {
s = CommitTxn(*txn, thread);
if (s.ok()) {
break;
}
}
// Optimistic txn might return TryAgain, in which case rollback
// and try again.
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
if (!s.IsTryAgain() || !FLAGS_use_optimistic_txn) {
break;
}
// Record and report historical TryAgain messages for debugging
try_again_messages +=
std::to_string(SystemClock::Default()->NowMicros() / 1000);
try_again_messages += "ms ";
try_again_messages += s.getState();
try_again_messages += "\n";
// In theory, each Rollback after TryAgain should have an independent
// chance of success, so too many retries could indicate something is
// not working properly.
if (tries >= 10) {
s = Status::TryAgain(try_again_messages);
Allow TryAgain in db_stress with optimistic txn, and refactoring (#11653) Summary: In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers. Also, some of the APIs were not clear about Transaction semantics, so I have clarified: * (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction). * Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test. Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress. * Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function. * Use unique_ptr (nicely complements removing unnecessary Rollbacks) * Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".) Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653 Test Plan: this is the test :) Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances. Reviewed By: cbi42 Differential Revision: D47882995 Pulled By: pdillinger fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
2023-07-28 23:25:29 +00:00
break;
}
s = txn->Rollback();
if (!s.ok()) {
break;
}
}
}
return s;
}
void StressTest::OperateDb(ThreadState* thread) {
ReadOptions read_opts(FLAGS_verify_checksum, true);
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
read_opts.rate_limiter_priority =
FLAGS_rate_limit_user_ops ? Env::IO_USER : Env::IO_TOTAL;
read_opts.async_io = FLAGS_async_io;
read_opts.adaptive_readahead = FLAGS_adaptive_readahead;
read_opts.readahead_size = FLAGS_readahead_size;
read_opts.auto_readahead_size = FLAGS_auto_readahead_size;
read_opts.fill_cache = FLAGS_fill_cache;
read_opts.optimize_multiget_for_io = FLAGS_optimize_multiget_for_io;
WriteOptions write_opts;
Rate-limit automatic WAL flush after each user write (#9607) Summary: **Context:** WAL flush is currently not rate-limited by `Options::rate_limiter`. This PR is to provide rate-limiting to auto WAL flush, the one that automatically happen after each user write operation (i.e, `Options::manual_wal_flush == false`), by adding `WriteOptions::rate_limiter_options`. Note that we are NOT rate-limiting WAL flush that do NOT automatically happen after each user write, such as `Options::manual_wal_flush == true + manual FlushWAL()` (rate-limiting multiple WAL flushes), for the benefits of: - being consistent with [ReadOptions::rate_limiter_priority](https://github.com/facebook/rocksdb/blob/7.0.fb/include/rocksdb/options.h#L515) - being able to turn off some WAL flush's rate-limiting but not all (e.g, turn off specific the WAL flush of a critical user write like a service's heartbeat) `WriteOptions::rate_limiter_options` only accept `Env::IO_USER` and `Env::IO_TOTAL` currently due to an implementation constraint. - The constraint is that we currently queue parallel writes (including WAL writes) based on FIFO policy which does not factor rate limiter priority into this layer's scheduling. If we allow lower priorities such as `Env::IO_HIGH/MID/LOW` and such writes specified with lower priorities occurs before ones specified with higher priorities (even just by a tiny bit in arrival time), the former would have blocked the latter, leading to a "priority inversion" issue and contradictory to what we promise for rate-limiting priority. Therefore we only allow `Env::IO_USER` and `Env::IO_TOTAL` right now before improving that scheduling. A pre-requisite to this feature is to support operation-level rate limiting in `WritableFileWriter`, which is also included in this PR. **Summary:** - Renamed test suite `DBRateLimiterTest to DBRateLimiterOnReadTest` for adding a new test suite - Accept `rate_limiter_priority` in `WritableFileWriter`'s private and public write functions - Passed `WriteOptions::rate_limiter_options` to `WritableFileWriter` in the path of automatic WAL flush. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9607 Test Plan: - Added new unit test to verify existing flush/compaction rate-limiting does not break, since `DBTest, RateLimitingTest` is disabled and current db-level rate-limiting tests focus on read only (e.g, `db_rate_limiter_test`, `DBTest2, RateLimitedCompactionReads`). - Added new unit test `DBRateLimiterOnWriteWALTest, AutoWalFlush` - `strace -ftt -e trace=write ./db_bench -benchmarks=fillseq -db=/dev/shm/testdb -rate_limit_auto_wal_flush=1 -rate_limiter_bytes_per_sec=15 -rate_limiter_refill_period_us=1000000 -write_buffer_size=100000000 -disable_auto_compactions=1 -num=100` - verified that WAL flush(i.e, system-call _write_) were chunked into 15 bytes and each _write_ was roughly 1 second apart - verified the chunking disappeared when `-rate_limit_auto_wal_flush=0` - crash test: `python3 tools/db_crashtest.py blackbox --disable_wal=0 --rate_limit_auto_wal_flush=1 --rate_limiter_bytes_per_sec=10485760 --interval=10` killed as normal **Benchmarked on flush/compaction to ensure no performance regression:** - compaction with rate-limiting (see table 1, avg over 1280-run): pre-change: **915635 micros/op**; post-change: **907350 micros/op (improved by 0.106%)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f compact_bmk_output.txt compact_bmk_output_2.txt dont_care_output.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench --benchmarks=fillrandom -db=$TEST_TMPDIR -disable_auto_compactions=1 -write_buffer_size=6710886 > dont_care_output.txt && ./db_bench --benchmarks=compact -use_existing_db=1 -db=$TEST_TMPDIR -level0_file_num_compaction_trigger=1 -rate_limiter_bytes_per_sec=100000000 | egrep 'compact' done > compact_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' compact_bmk_output.txt >> compact_bmk_output_2.txt done ``` - compaction w/o rate-limiting (see table 2, avg over 640-run): pre-change: **822197 micros/op**; post-change: **823148 micros/op (regressed by 0.12%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` - flush with rate-limiting (see table 3, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench ): pre-change: **745752 micros/op**; post-change: **745331 micros/op (regressed by 0.06 %)** ``` #!/bin/bash TEST_TMPDIR=/dev/shm/testdb START=1 NUM_DATA_ENTRY=8 N=10 rm -f flush_bmk_output.txt flush_bmk_output_2.txt for i in $(eval echo "{$START..$NUM_DATA_ENTRY}") do NUM_RUN=$(($N*(2**($i-1)))) for j in $(eval echo "{$START..$NUM_RUN}") do ./db_bench -db=$TEST_TMPDIR -write_buffer_size=1048576000 -num=1000000 -rate_limiter_bytes_per_sec=100000000 -benchmarks=fillseq,flush | egrep 'flush' done > flush_bmk_output.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' flush_bmk_output.txt >> flush_bmk_output_2.txt done ``` - flush w/o rate-limiting (see table 4, avg over 320-run, run on the [patch](https://github.com/hx235/rocksdb/commit/ee5c6023a9f6533fab9afdc681568daa21da4953) to augment current db_bench): pre-change: **487512 micros/op**, post-change: **485856 micors/ops (improved by 0.34%)** ``` Same as above script, except that -rate_limiter_bytes_per_sec=0 ``` | table 1 - compact with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 896978 | 16046.9 | 901242 | 15670.9 | 0.475373978 20 | 893718 | 15813 | 886505 | 17544.7 | -0.8070778478 40 | 900426 | 23882.2 | 894958 | 15104.5 | -0.6072681153 80 | 906635 | 21761.5 | 903332 | 23948.3 | -0.3643141948 160 | 898632 | 21098.9 | 907583 | 21145 | 0.9960695813 3.20E+02 | 905252 | 22785.5 | 908106 | 25325.5 | 0.3152713278 6.40E+02 | 905213 | 23598.6 | 906741 | 21370.5 | 0.1688000504 **1.28E+03** | **908316** | **23533.1** | **907350** | **24626.8** | **-0.1063506533** average over #-run | 901896.25 | 21064.9625 | 901977.125 | 20592.025 | 0.008967217682 | table 2 - compact w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 811211 | 26996.7 | 807586 | 28456.4 | -0.4468627768 20 | 815465 | 14803.7 | 814608 | 28719.7 | -0.105093413 40 | 809203 | 26187.1 | 797835 | 25492.1 | -1.404839082 80 | 822088 | 28765.3 | 822192 | 32840.4 | 0.01265071379 160 | 821719 | 36344.7 | 821664 | 29544.9 | -0.006693285661 3.20E+02 | 820921 | 27756.4 | 821403 | 28347.7 | 0.05871454135 **6.40E+02** | **822197** | **28960.6** | **823148** | **30055.1** | **0.1156657103** average over #-run | 8.18E+05 | 2.71E+04 | 8.15E+05 | 2.91E+04 | -0.25 | table 3 - flush with rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 741721 | 11770.8 | 740345 | 5949.76 | -0.1855144994 20 | 735169 | 3561.83 | 743199 | 9755.77 | 1.09226586 40 | 743368 | 8891.03 | 742102 | 8683.22 | -0.1703059588 80 | 742129 | 8148.51 | 743417 | 9631.58| 0.1735547324 160 | 749045 | 9757.21 | 746256 | 9191.86 | -0.3723407806 **3.20E+02** | **745752** | **9819.65** | **745331** | **9840.62** | **-0.0564530836** 6.40E+02 | 749006 | 11080.5 | 748173 | 10578.7 | -0.1112140624 average over #-run | 743741.4286 | 9004.218571 | 744117.5714 | 9090.215714 | 0.05057441238 | table 4 - flush w/o rate-limiting| #-run | (pre-change) avg micros/op | std micros/op | (post-change) avg micros/op | std micros/op | change in avg micros/op (%) -- | -- | -- | -- | -- | -- 10 | 477283 | 24719.6 | 473864 | 12379 | -0.7163464863 20 | 486743 | 20175.2 | 502296 | 23931.3 | 3.195320734 40 | 482846 | 15309.2 | 489820 | 22259.5 | 1.444352858 80 | 491490 | 21883.1 | 490071 | 23085.7 | -0.2887139108 160 | 493347 | 28074.3 | 483609 | 21211.7 | -1.973864238 **3.20E+02** | **487512** | **21401.5** | **485856** | **22195.2** | **-0.3396839462** 6.40E+02 | 490307 | 25418.6 | 485435 | 22405.2 | -0.9936631539 average over #-run | 4.87E+05 | 2.24E+04 | 4.87E+05 | 2.11E+04 | 0.00E+00 Reviewed By: ajkr Differential Revision: D34442441 Pulled By: hx235 fbshipit-source-id: 4790f13e1e5c0a95ae1d1cc93ffcf69dc6e78bdd
2022-03-08 21:19:39 +00:00
if (FLAGS_rate_limit_auto_wal_flush) {
write_opts.rate_limiter_priority = Env::IO_USER;
}
write_opts.memtable_insert_hint_per_batch =
FLAGS_memtable_insert_hint_per_batch;
auto shared = thread->shared;
char value[100];
std::string from_db;
if (FLAGS_sync) {
write_opts.sync = true;
}
write_opts.disableWAL = FLAGS_disable_wal;
write_opts.protection_bytes_per_key = FLAGS_batch_protection_bytes_per_key;
const int prefix_bound = static_cast<int>(FLAGS_readpercent) +
static_cast<int>(FLAGS_prefixpercent);
const int write_bound = prefix_bound + static_cast<int>(FLAGS_writepercent);
const int del_bound = write_bound + static_cast<int>(FLAGS_delpercent);
const int delrange_bound =
del_bound + static_cast<int>(FLAGS_delrangepercent);
const int iterate_bound =
delrange_bound + static_cast<int>(FLAGS_iterpercent);
const uint64_t ops_per_open = FLAGS_ops_per_thread / (FLAGS_reopen + 1);
#ifndef NDEBUG
if (FLAGS_read_fault_one_in) {
fault_fs_guard->SetThreadLocalReadErrorContext(
thread->shared->GetSeed(), FLAGS_read_fault_one_in,
FLAGS_inject_error_severity == 1 /* retryable */);
}
#endif // NDEBUG
thread->stats.Start();
for (int open_cnt = 0; open_cnt <= FLAGS_reopen; ++open_cnt) {
if (thread->shared->HasVerificationFailedYet() ||
thread->shared->ShouldStopTest()) {
break;
}
if (open_cnt != 0) {
thread->stats.FinishedSingleOp();
MutexLock l(thread->shared->GetMutex());
while (!thread->snapshot_queue.empty()) {
db_->ReleaseSnapshot(thread->snapshot_queue.front().second.snapshot);
delete thread->snapshot_queue.front().second.key_vec;
thread->snapshot_queue.pop();
}
thread->shared->IncVotedReopen();
if (thread->shared->AllVotedReopen()) {
thread->shared->GetStressTest()->Reopen(thread);
thread->shared->GetCondVar()->SignalAll();
} else {
thread->shared->GetCondVar()->Wait();
}
// Commenting this out as we don't want to reset stats on each open.
// thread->stats.Start();
}
for (uint64_t i = 0; i < ops_per_open; i++) {
if (thread->shared->HasVerificationFailedYet()) {
break;
}
// Change Options
if (thread->rand.OneInOpt(FLAGS_set_options_one_in)) {
SetOptions(thread);
}
if (thread->rand.OneInOpt(FLAGS_set_in_place_one_in)) {
options_.inplace_update_support ^= options_.inplace_update_support;
}
if (thread->tid == 0 && FLAGS_verify_db_one_in > 0 &&
thread->rand.OneIn(FLAGS_verify_db_one_in)) {
ContinuouslyVerifyDb(thread);
if (thread->shared->ShouldStopTest()) {
break;
}
}
MaybeClearOneColumnFamily(thread);
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
if (thread->rand.OneInOpt(FLAGS_manual_wal_flush_one_in)) {
bool sync = thread->rand.OneIn(2) ? true : false;
Status s = db_->FlushWAL(sync);
if (!s.ok() && !(sync && s.IsNotSupported())) {
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
fprintf(stderr, "FlushWAL(sync=%s) failed: %s\n",
(sync ? "true" : "false"), s.ToString().c_str());
}
}
Cleanup, improve, stress test LockWAL() (#11143) Summary: The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change: * Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use. * Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions) * Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability) * Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other. * Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads. * Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143 Test Plan: unit tests added / updated, added to stress/crash test Reviewed By: ajkr Differential Revision: D42848627 Pulled By: pdillinger fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4
2023-01-31 06:52:30 +00:00
if (thread->rand.OneInOpt(FLAGS_lock_wal_one_in)) {
Status s = db_->LockWAL();
if (!s.ok()) {
fprintf(stderr, "LockWAL() failed: %s\n", s.ToString().c_str());
} else {
auto old_seqno = db_->GetLatestSequenceNumber();
// Yield for a while
do {
std::this_thread::yield();
} while (thread->rand.OneIn(2));
// Latest seqno should not have changed
auto new_seqno = db_->GetLatestSequenceNumber();
if (old_seqno != new_seqno) {
fprintf(
stderr,
"Failure: latest seqno changed from %u to %u with WAL locked\n",
(unsigned)old_seqno, (unsigned)new_seqno);
}
s = db_->UnlockWAL();
if (!s.ok()) {
fprintf(stderr, "UnlockWAL() failed: %s\n", s.ToString().c_str());
}
}
}
if (thread->rand.OneInOpt(FLAGS_sync_wal_one_in)) {
Status s = db_->SyncWAL();
if (!s.ok() && !s.IsNotSupported()) {
fprintf(stderr, "SyncWAL() failed: %s\n", s.ToString().c_str());
}
}
int rand_column_family = thread->rand.Next() % FLAGS_column_families;
ColumnFamilyHandle* column_family = column_families_[rand_column_family];
if (thread->rand.OneInOpt(FLAGS_compact_files_one_in)) {
TestCompactFiles(thread, column_family);
}
int64_t rand_key = GenerateOneKey(thread, i);
std::string keystr = Key(rand_key);
Slice key = keystr;
if (thread->rand.OneInOpt(FLAGS_compact_range_one_in)) {
TestCompactRange(thread, rand_key, key, column_family);
if (thread->shared->HasVerificationFailedYet()) {
break;
}
}
std::vector<int> rand_column_families =
GenerateColumnFamilies(FLAGS_column_families, rand_column_family);
if (thread->rand.OneInOpt(FLAGS_flush_one_in)) {
Status status = TestFlush(rand_column_families);
if (!status.ok()) {
fprintf(stdout, "Unable to perform Flush(): %s\n",
status.ToString().c_str());
}
}
// Verify GetLiveFiles with a 1 in N chance.
if (thread->rand.OneInOpt(FLAGS_get_live_files_apis_one_in) &&
!FLAGS_write_fault_one_in) {
Status s_1 = VerifyGetLiveFiles();
ProcessStatus(shared, "VerifyGetLiveFiles", s_1);
Status s_2 = VerifyGetLiveFilesMetaData();
ProcessStatus(shared, "VerifyGetLiveFilesMetaData", s_2);
Status s_3 = VerifyGetLiveFilesStorageInfo();
ProcessStatus(shared, "VerifyGetLiveFilesStorageInfo", s_3);
}
// Verify GetAllColumnFamilyMetaData with a 1 in N chance.
if (thread->rand.OneInOpt(FLAGS_get_all_column_family_metadata_one_in)) {
Status status = VerifyGetAllColumnFamilyMetaData();
ProcessStatus(shared, "VerifyGetAllColumnFamilyMetaData", status);
}
// Verify GetSortedWalFiles with a 1 in N chance.
if (thread->rand.OneInOpt(FLAGS_get_sorted_wal_files_one_in)) {
Status status = VerifyGetSortedWalFiles();
ProcessStatus(shared, "VerifyGetSortedWalFiles", status);
}
// Verify GetCurrentWalFile with a 1 in N chance.
if (thread->rand.OneInOpt(FLAGS_get_current_wal_file_one_in)) {
Status status = VerifyGetCurrentWalFile();
ProcessStatus(shared, "VerifyGetCurrentWalFile", status);
}
if (thread->rand.OneInOpt(FLAGS_pause_background_one_in)) {
Status status = TestPauseBackground(thread);
ProcessStatus(shared, "Pause/ContinueBackgroundWork", status);
}
if (thread->rand.OneInOpt(FLAGS_disable_file_deletions_one_in)) {
Status status = TestDisableFileDeletions(thread);
ProcessStatus(shared, "TestDisableFileDeletions", status);
}
if (thread->rand.OneInOpt(FLAGS_disable_manual_compaction_one_in)) {
Status status = TestDisableManualCompaction(thread);
ProcessStatus(shared, "TestDisableManualCompaction", status);
}
if (thread->rand.OneInOpt(FLAGS_verify_checksum_one_in)) {
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::SetEnableTracking(FLAGS_enable_thread_tracking);
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_VERIFY_DB_CHECKSUM);
Status status = db_->VerifyChecksum();
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::ResetThreadStatus();
ProcessStatus(shared, "VerifyChecksum", status);
}
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
if (thread->rand.OneInOpt(FLAGS_verify_file_checksums_one_in)) {
ThreadStatusUtil::SetEnableTracking(FLAGS_enable_thread_tracking);
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_VERIFY_FILE_CHECKSUMS);
Status status = db_->VerifyFileChecksums(read_opts);
ThreadStatusUtil::ResetThreadStatus();
ProcessStatus(shared, "VerifyFileChecksums", status);
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
}
if (thread->rand.OneInOpt(FLAGS_get_property_one_in)) {
TestGetProperty(thread);
}
if (thread->rand.OneInOpt(FLAGS_get_properties_of_all_tables_one_in)) {
Status status = TestGetPropertiesOfAllTables();
ProcessStatus(shared, "TestGetPropertiesOfAllTables", status);
}
std::vector<int64_t> rand_keys = GenerateKeys(rand_key);
if (thread->rand.OneInOpt(FLAGS_ingest_external_file_one_in)) {
TestIngestExternalFile(thread, rand_column_families, rand_keys);
}
if (thread->rand.OneInOpt(FLAGS_backup_one_in)) {
// Beyond a certain DB size threshold, this test becomes heavier than
// it's worth.
uint64_t total_size = 0;
if (FLAGS_backup_max_size > 0) {
std::vector<FileAttributes> files;
db_stress_env->GetChildrenFileAttributes(FLAGS_db, &files);
for (auto& file : files) {
total_size += file.size_bytes;
}
}
if (total_size <= FLAGS_backup_max_size) {
Status s = TestBackupRestore(thread, rand_column_families, rand_keys);
ProcessStatus(shared, "Backup/restore", s);
}
}
if (thread->rand.OneInOpt(FLAGS_checkpoint_one_in)) {
Status s = TestCheckpoint(thread, rand_column_families, rand_keys);
ProcessStatus(shared, "Checkpoint", s);
}
if (thread->rand.OneInOpt(FLAGS_approximate_size_one_in)) {
Status s =
TestApproximateSize(thread, i, rand_column_families, rand_keys);
ProcessStatus(shared, "ApproximateSize", s);
}
if (thread->rand.OneInOpt(FLAGS_acquire_snapshot_one_in)) {
TestAcquireSnapshot(thread, rand_column_family, keystr, i);
}
/*always*/ {
Status s = MaybeReleaseSnapshots(thread, i);
ProcessStatus(shared, "Snapshot", s);
}
// Assign timestamps if necessary.
std::string read_ts_str;
Slice read_ts;
if (FLAGS_user_timestamp_size > 0) {
read_ts_str = GetNowNanos();
read_ts = read_ts_str;
read_opts.timestamp = &read_ts;
}
int prob_op = thread->rand.Uniform(100);
// Reset this in case we pick something other than a read op. We don't
// want to use a stale value when deciding at the beginning of the loop
// whether to vote to reopen
if (prob_op >= 0 && prob_op < static_cast<int>(FLAGS_readpercent)) {
assert(0 <= prob_op);
// OPERATION read
Add IOActivity.kMultiGetEntity (#11842) Summary: - As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`. ## Minor Refactor - Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`. - I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842 Test Plan: - Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing. ``` python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 ``` Reviewed By: ltamasi Differential Revision: D49329575 Pulled By: jaykorean fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
2023-09-15 22:34:04 +00:00
ThreadStatusUtil::SetEnableTracking(FLAGS_enable_thread_tracking);
if (FLAGS_use_multi_get_entity) {
constexpr uint64_t max_batch_size = 64;
const uint64_t batch_size = std::min(
static_cast<uint64_t>(thread->rand.Uniform(max_batch_size)) + 1,
ops_per_open - i);
assert(batch_size >= 1);
assert(batch_size <= max_batch_size);
assert(i + batch_size <= ops_per_open);
rand_keys = GenerateNKeys(thread, static_cast<int>(batch_size), i);
Add IOActivity.kMultiGetEntity (#11842) Summary: - As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`. ## Minor Refactor - Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`. - I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842 Test Plan: - Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing. ``` python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 ``` Reviewed By: ltamasi Differential Revision: D49329575 Pulled By: jaykorean fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
2023-09-15 22:34:04 +00:00
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_MULTIGETENTITY);
TestMultiGetEntity(thread, read_opts, rand_column_families,
rand_keys);
i += batch_size - 1;
} else if (FLAGS_use_get_entity) {
GetEntity Support for ReadOnlyDB and SecondaryDB (#11799) Summary: `GetEntity` API support for ReadOnly DB and Secondary DB. - Introduced `GetImpl()` with `GetImplOptions` in `db_impl_readonly` and refactored current `Get()` logic into `GetImpl()` so that look up logic can be reused for `GetEntity()` (Following the same pattern as `DBImpl::Get()` and `DBImpl::GetEntity()`) - Introduced `GetImpl()` with `GetImplOptions` in `db_impl_secondary` and refactored current `GetImpl()` logic. This is to make `DBImplSecondary::Get/GetEntity` consistent with `DBImpl::Get/GetEntity` and `DBImplReadOnly::Get/GetEntity` - `GetImpl()` in `db_impl` is now virtual. both `db_impl_readonly` and `db_impl_secondary`'s `Get()` override are no longer needed since all three dbs now have the same `Get()` which calls `GetImpl()` internally. - `GetImpl()` in `DBImplReadOnly` and `DBImplSecondary` now pass in `columns` instead of `nullptr` in lookup functions like `memtable->get()` - Introduced `GetEntity()` API in `DBImplReadOnly` and `DBImplSecondary` which simply calls `GetImpl()` with `columns` set in `GetImplOptions`. - Introduced `Env::IOActivity::kGetEntity` and set read_options.io_activity to `Env::IOActivity::kGetEntity` for `GetEntity()` operations (in db_impl) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11799 Test Plan: **Unit Tests** - Added verification in `DBWideBasicTest::PutEntity` by Reopening DB as ReadOnly with the same setup. - Added verification in `DBSecondaryTest::ReopenAsSecondary` by calling `PutEntity()` and `GetEntity()` on top of existing `Put()` and `Get()` - `make -j64 check` **Crash Tests** - `python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter val=10` - `python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 ` - `python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --inter val=10` Reviewed By: ltamasi Differential Revision: D49037040 Pulled By: jaykorean fbshipit-source-id: a0648253ded6e91af7953de364ed3c6bf163626b
2023-09-15 15:30:44 +00:00
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_GETENTITY);
TestGetEntity(thread, read_opts, rand_column_families, rand_keys);
} else if (FLAGS_use_multiget) {
// Leave room for one more iteration of the loop with a single key
// batch. This is to ensure that each thread does exactly the same
// number of ops
int multiget_batch_size = static_cast<int>(
std::min(static_cast<uint64_t>(thread->rand.Uniform(64)),
FLAGS_ops_per_thread - i - 1));
// If its the last iteration, ensure that multiget_batch_size is 1
multiget_batch_size = std::max(multiget_batch_size, 1);
rand_keys = GenerateNKeys(thread, multiget_batch_size, i);
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_MULTIGET);
TestMultiGet(thread, read_opts, rand_column_families, rand_keys);
i += multiget_batch_size - 1;
} else {
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_GET);
TestGet(thread, read_opts, rand_column_families, rand_keys);
}
Add IOActivity.kMultiGetEntity (#11842) Summary: - As a follow up from https://github.com/facebook/rocksdb/issues/11799, adding `Env::IOActivity::kMultiGetEntity` support to `DBImpl::MultiGetEntity()`. ## Minor Refactor - Because both `DBImpl::MultiGet()` and `DBImpl::MultiGetEntity()` call `DBImpl::MultiGetCommon()` which later calls `DBImpl::MultiGetWithCallback()` where we check `Env::IOActivity::kMultiGet`, minor refactor was needed so that we don't check `Env::IOActivity::kMultiGet` for `DBImpl::MultiGetEntity()`. - I still see more areas for refactoring to avoid duplicate code of checking IOActivity and setting it when Unknown, but this will be addressed separately. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11842 Test Plan: - Added the `ThreadStatus::OperationType::OP_MULTIGETENTITY` in `db_stress` to verify the pass-down IOActivity in a thread aligns with the actual activity the thread is doing. ``` python3 tools/db_crashtest.py blackbox --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 python3 tools/db_crashtest.py blackbox --cf_consistency --max_key=25000000 --write_buffer_size=4194304 --max_bytes_for_level_base=2097152 --target_file_size_base=2097152 --periodic_compaction_seconds=0 --use_put_entity_one_in=10 --use_get_entity=1 --duration=60 --interval=10 ``` Reviewed By: ltamasi Differential Revision: D49329575 Pulled By: jaykorean fbshipit-source-id: 05198f1d3f92e6be3d42a3d184bacb3ab2ce6923
2023-09-15 22:34:04 +00:00
ThreadStatusUtil::ResetThreadStatus();
} else if (prob_op < prefix_bound) {
assert(static_cast<int>(FLAGS_readpercent) <= prob_op);
// OPERATION prefix scan
// keys are 8 bytes long, prefix size is FLAGS_prefix_size. There are
// (8 - FLAGS_prefix_size) bytes besides the prefix. So there will
// be 2 ^ ((8 - FLAGS_prefix_size) * 8) possible keys with the same
// prefix
TestPrefixScan(thread, read_opts, rand_column_families, rand_keys);
} else if (prob_op < write_bound) {
assert(prefix_bound <= prob_op);
// OPERATION write
TestPut(thread, write_opts, read_opts, rand_column_families, rand_keys,
value);
} else if (prob_op < del_bound) {
assert(write_bound <= prob_op);
// OPERATION delete
TestDelete(thread, write_opts, rand_column_families, rand_keys);
} else if (prob_op < delrange_bound) {
assert(del_bound <= prob_op);
// OPERATION delete range
TestDeleteRange(thread, write_opts, rand_column_families, rand_keys);
} else if (prob_op < iterate_bound) {
assert(delrange_bound <= prob_op);
// OPERATION iterate
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
if (!FLAGS_skip_verifydb &&
thread->rand.OneInOpt(
FLAGS_verify_iterator_with_expected_state_one_in)) {
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::SetEnableTracking(FLAGS_enable_thread_tracking);
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_DBITERATOR);
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
TestIterateAgainstExpected(thread, read_opts, rand_column_families,
rand_keys);
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::ResetThreadStatus();
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
} else {
int num_seeks = static_cast<int>(std::min(
std::max(static_cast<uint64_t>(thread->rand.Uniform(4)),
static_cast<uint64_t>(1)),
std::max(static_cast<uint64_t>(FLAGS_ops_per_thread - i - 1),
static_cast<uint64_t>(1))));
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
rand_keys = GenerateNKeys(thread, num_seeks, i);
i += num_seeks - 1;
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::SetEnableTracking(FLAGS_enable_thread_tracking);
ThreadStatusUtil::SetThreadOperation(
ThreadStatus::OperationType::OP_DBITERATOR);
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
TestIterate(thread, read_opts, rand_column_families, rand_keys);
Group rocksdb.sst.read.micros stat by different user read IOActivity + misc (#11444) Summary: **Context/Summary:** - Similar to https://github.com/facebook/rocksdb/pull/11288 but for user read such as `Get(), MultiGet(), DBIterator::XXX(), Verify(File)Checksum()`. - For this, I refactored some user-facing `MultiGet` calls in `TransactionBase` and various types of `DB` so that it does not call a user-facing `Get()` but `GetImpl()` for passing the `ReadOptions::io_activity` check (see PR conversation) - New user read stats breakdown are guarded by `kExceptDetailedTimers` since measurement shows they have 4-5% regression to the upstream/main. - Misc - More refactoring: with https://github.com/facebook/rocksdb/pull/11288, we complete passing `ReadOptions/IOOptions` to FS level. So we can now replace the previously [added](https://github.com/facebook/rocksdb/pull/9424) `rate_limiter_priority` parameter in `RandomAccessFileReader`'s `Read/MultiRead/Prefetch()` with `IOOptions::rate_limiter_priority` - Also, `ReadAsync()` call time is measured in `SST_READ_MICRO` now Pull Request resolved: https://github.com/facebook/rocksdb/pull/11444 Test Plan: - CI fake db crash/stress test - Microbenchmarking **Build** `make clean && ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make -jN db_basic_bench` - google benchmark version: https://github.com/google/benchmark/commit/604f6fd3f4b34a84ec4eb4db81d842fa4db829cd - db_basic_bench_base: upstream - db_basic_bench_pr: db_basic_bench_base + this PR - asyncread_db_basic_bench_base: upstream + [db basic bench patch for IteratorNext](https://github.com/facebook/rocksdb/compare/main...hx235:rocksdb:micro_bench_async_read) - asyncread_db_basic_bench_pr: asyncread_db_basic_bench_base + this PR **Test** Get ``` TEST_TMPDIR=/dev/shm ./db_basic_bench_{null_stat|base|pr} --benchmark_filter=DBGet/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/negative_query:0/enable_filter:0/mmap:1/threads:1 --benchmark_repetitions=1000 ``` Result ``` Coming soon ``` AsyncRead ``` TEST_TMPDIR=/dev/shm ./asyncread_db_basic_bench_{base|pr} --benchmark_filter=IteratorNext/comp_style:0/max_data:134217728/per_key_size:256/enable_statistics:1/async_io:1/include_detailed_timers:0 --benchmark_repetitions=1000 > syncread_db_basic_bench_{base|pr}.out ``` Result ``` Base: 1956,1956,1968,1977,1979,1986,1988,1988,1988,1990,1991,1991,1993,1993,1993,1993,1994,1996,1997,1997,1997,1998,1999,2001,2001,2002,2004,2007,2007,2008, PR (2.3% regression, due to measuring `SST_READ_MICRO` that wasn't measured before): 1993,2014,2016,2022,2024,2027,2027,2028,2028,2030,2031,2031,2032,2032,2038,2039,2042,2044,2044,2047,2047,2047,2048,2049,2050,2052,2052,2052,2053,2053, ``` Reviewed By: ajkr Differential Revision: D45918925 Pulled By: hx235 fbshipit-source-id: 58a54560d9ebeb3a59b6d807639692614dad058a
2023-08-09 00:26:50 +00:00
ThreadStatusUtil::ResetThreadStatus();
Add Iterator test against expected state to stress test (#10538) Summary: As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913, `db_stress` does not have much verification for iterator correctness. It has a `TestIterate()` function, but that is mainly for comparing results between two iterators, one with `total_order_seek` and the other optionally sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33 added a new `TestIterateAgainstExpected()` function that compares iterator against expected state. It locks a range of keys, creates an iterator, does a random sequence of `Next/Prev` and compares against expected state. This PR is based on that commit, the main changes include some logs (for easier debugging if a test fails), a forward and backward scan to cover the entire locked key range, and a flag for optionally turning on this version of Iterator testing. Added constraint that the checks against expected state in `TestIterateAgainstExpected()` and in `TestGet()` are only turned on when `--skip_verifydb` flag is not set. Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538 Test Plan: Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`, and a large `--iterpercent` and `--num_iterations`. Checked `op_logs` manually to ensure expected coverage. Tweaked part of the code in https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it. - internally run various flavor of crash test Reviewed By: ajkr Differential Revision: D38847269 Pulled By: cbi42 fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
2022-08-24 21:59:50 +00:00
}
} else {
assert(iterate_bound <= prob_op);
TestCustomOperations(thread, rand_column_families);
}
thread->stats.FinishedSingleOp();
}
}
while (!thread->snapshot_queue.empty()) {
db_->ReleaseSnapshot(thread->snapshot_queue.front().second.snapshot);
delete thread->snapshot_queue.front().second.key_vec;
thread->snapshot_queue.pop();
}
thread->stats.Stop();
}
// Generated a list of keys that close to boundaries of SST keys.
// If there isn't any SST file in the DB, return empty list.
std::vector<std::string> StressTest::GetWhiteBoxKeys(ThreadState* thread,
DB* db,
ColumnFamilyHandle* cfh,
size_t num_keys) {
ColumnFamilyMetaData cfmd;
db->GetColumnFamilyMetaData(cfh, &cfmd);
std::vector<std::string> boundaries;
for (const LevelMetaData& lmd : cfmd.levels) {
for (const SstFileMetaData& sfmd : lmd.files) {
// If FLAGS_user_timestamp_size > 0, then both smallestkey and largestkey
// have timestamps.
const auto& skey = sfmd.smallestkey;
const auto& lkey = sfmd.largestkey;
assert(skey.size() >= FLAGS_user_timestamp_size);
assert(lkey.size() >= FLAGS_user_timestamp_size);
boundaries.push_back(
skey.substr(0, skey.size() - FLAGS_user_timestamp_size));
boundaries.push_back(
lkey.substr(0, lkey.size() - FLAGS_user_timestamp_size));
}
}
if (boundaries.empty()) {
return {};
}
std::vector<std::string> ret;
for (size_t j = 0; j < num_keys; j++) {
std::string k =
boundaries[thread->rand.Uniform(static_cast<int>(boundaries.size()))];
if (thread->rand.OneIn(3)) {
// Reduce one byte from the string
for (int i = static_cast<int>(k.length()) - 1; i >= 0; i--) {
uint8_t cur = k[i];
if (cur > 0) {
k[i] = static_cast<char>(cur - 1);
break;
} else if (i > 0) {
k[i] = 0xFFu;
}
}
} else if (thread->rand.OneIn(2)) {
// Add one byte to the string
for (int i = static_cast<int>(k.length()) - 1; i >= 0; i--) {
uint8_t cur = k[i];
if (cur < 255) {
k[i] = static_cast<char>(cur + 1);
break;
} else if (i > 0) {
k[i] = 0x00;
}
}
}
ret.push_back(k);
}
return ret;
}
// Given a key K, this creates an iterator which scans to K and then
// does a random sequence of Next/Prev operations.
Status StressTest::TestIterate(ThreadState* thread,
const ReadOptions& read_opts,
const std::vector<int>& rand_column_families,
const std::vector<int64_t>& rand_keys) {
assert(!rand_column_families.empty());
assert(!rand_keys.empty());
ManagedSnapshot snapshot_guard(db_);
ReadOptions ro = read_opts;
ro.snapshot = snapshot_guard.snapshot();
std::string read_ts_str;
Slice read_ts_slice;
MaybeUseOlderTimestampForRangeScan(thread, read_ts_str, read_ts_slice, ro);
std::string op_logs;
ro.pin_data = thread->rand.OneIn(2);
ro.background_purge_on_iterator_cleanup = thread->rand.OneIn(2);
bool expect_total_order = false;
if (thread->rand.OneIn(16)) {
// When prefix extractor is used, it's useful to cover total order seek.
ro.total_order_seek = true;
expect_total_order = true;
} else if (thread->rand.OneIn(4)) {
ro.total_order_seek = false;
ro.auto_prefix_mode = true;
expect_total_order = true;
} else if (options_.prefix_extractor.get() == nullptr) {
expect_total_order = true;
}
std::string upper_bound_str;
Slice upper_bound;
if (thread->rand.OneIn(16)) {
// With a 1/16 chance, set an iterator upper bound.
// Note: upper_bound can be smaller than the seek key.
const int64_t rand_upper_key = GenerateOneKey(thread, FLAGS_ops_per_thread);
upper_bound_str = Key(rand_upper_key);
upper_bound = Slice(upper_bound_str);
ro.iterate_upper_bound = &upper_bound;
}
Fix various failures in auto_readahead_size (#11884) Summary: 1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.` **Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator. 2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset` **Fix** - Remove prefetch_buffer to be used when uncompressed dict is read. 3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed. Received signal 6 (Aborted) Invoking GDB for stack trace... db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed` **Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884 Test Plan: Ran various flavors of crash tests locally for the whole duration Reviewed By: anand1976 Differential Revision: D49834201 Pulled By: akankshamahajan15 fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
2023-10-03 00:47:24 +00:00
std::string lower_bound_str;
Slice lower_bound;
if (thread->rand.OneIn(16)) {
// With a 1/16 chance, enable iterator lower bound.
// Note: lower_bound can be greater than the seek key.
const int64_t rand_lower_key = GenerateOneKey(thread, FLAGS_ops_per_thread);
lower_bound_str = Key(rand_lower_key);
lower_bound = Slice(lower_bound_str);
ro.iterate_lower_bound = &lower_bound;
}
ColumnFamilyHandle* const cfh = column_families_[rand_column_families[0]];
assert(cfh);
std::unique_ptr<Iterator> iter(db_->NewIterator(ro, cfh));
std::vector<std::string> key_strs;
if (thread->rand.OneIn(16)) {
// Generate keys close to lower or upper bound of SST files.
key_strs = GetWhiteBoxKeys(thread, db_, cfh, rand_keys.size());
}
if (key_strs.empty()) {
// Use the random keys passed in.
for (int64_t rkey : rand_keys) {
key_strs.push_back(Key(rkey));
}
}
constexpr size_t kOpLogsLimit = 10000;
for (const std::string& key_str : key_strs) {
if (op_logs.size() > kOpLogsLimit) {
// Shouldn't take too much memory for the history log. Clear it.
op_logs = "(cleared...)\n";
}
if (ro.iterate_upper_bound != nullptr && thread->rand.OneIn(2)) {
// With a 1/2 chance, change the upper bound.
// It is possible that it is changed before first use, but there is no
// problem with that.
const int64_t rand_upper_key =
GenerateOneKey(thread, FLAGS_ops_per_thread);
upper_bound_str = Key(rand_upper_key);
upper_bound = Slice(upper_bound_str);
}
if (ro.iterate_lower_bound != nullptr && thread->rand.OneIn(4)) {
// With a 1/4 chance, change the lower bound.
// It is possible that it is changed before first use, but there is no
// problem with that.
const int64_t rand_lower_key =
GenerateOneKey(thread, FLAGS_ops_per_thread);
lower_bound_str = Key(rand_lower_key);
lower_bound = Slice(lower_bound_str);
}
// Set up an iterator, perform the same operations without bounds and with
// total order seek, and compare the results. This is to identify bugs
// related to bounds, prefix extractor, or reseeking. Sometimes we are
// comparing iterators with the same set-up, and it doesn't hurt to check
// them to be equal.
//
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
// This `ReadOptions` is for validation purposes. Ignore
// `FLAGS_rate_limit_user_ops` to avoid slowing any validation.
ReadOptions cmp_ro;
cmp_ro.timestamp = ro.timestamp;
cmp_ro.iter_start_ts = ro.iter_start_ts;
cmp_ro.snapshot = snapshot_guard.snapshot();
cmp_ro.total_order_seek = true;
ColumnFamilyHandle* const cmp_cfh =
GetControlCfh(thread, rand_column_families[0]);
assert(cmp_cfh);
std::unique_ptr<Iterator> cmp_iter(db_->NewIterator(cmp_ro, cmp_cfh));
bool diverged = false;
Slice key(key_str);
const bool support_seek_first_or_last = expect_total_order;
Add new Iterator API Refresh(const snapshot*) (#10594) Summary: This PR resolves https://github.com/facebook/rocksdb/issues/10487 & https://github.com/facebook/rocksdb/issues/10536, user code needs to call Refresh() periodically. The main code change is to support range deletions. A range tombstone iterator uses a sequence number as upper bound to decide which range tombstones are effective. During Iterator refresh, this sequence number upper bound needs to be updated for all range tombstone iterators under DBIter and LevelIterator. LevelIterator may create new table iterators and range tombstone iterator during scanning, so it needs to be aware of iterator refresh. The code path that propagates this change is `db_iter_->set_sequence(read_seq) -> MergingIterator::SetRangeDelReadSeqno() -> TruncatedRangeDelIterator::SetRangeDelReadSeqno() and LevelIterator::SetRangeDelReadSeqno()`. This change also fixes an issue where range tombstone iterators created by LevelIterator may access ReadOptions::snapshot, even though we do not explicitly require users to keep a snapshot alive after creating an Iterator. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10594 Test Plan: * New unit tests. * Add Iterator::Refresh(snapshot) to stress test. Note that this change only adds tests for refreshing to the same snapshot since this is the main target use case. TODO in a following PR: * Stress test Iterator::Refresh() to different snapshots or no snapshot. Reviewed By: ajkr Differential Revision: D48456896 Pulled By: cbi42 fbshipit-source-id: 2e642c04e91235cc9542ef4cd37b3c20823bd779
2023-09-15 17:44:43 +00:00
// Write-prepared and Write-unprepared do not support Refresh() yet.
if (!(FLAGS_use_txn && FLAGS_txn_write_policy != 0 /* write committed */) &&
thread->rand.OneIn(4)) {
Status s = iter->Refresh(snapshot_guard.snapshot());
assert(s.ok());
op_logs += "Refresh ";
}
LastIterateOp last_op;
if (support_seek_first_or_last && thread->rand.OneIn(100)) {
iter->SeekToFirst();
cmp_iter->SeekToFirst();
last_op = kLastOpSeekToFirst;
op_logs += "STF ";
} else if (support_seek_first_or_last && thread->rand.OneIn(100)) {
iter->SeekToLast();
cmp_iter->SeekToLast();
last_op = kLastOpSeekToLast;
op_logs += "STL ";
} else if (thread->rand.OneIn(8)) {
iter->SeekForPrev(key);
cmp_iter->SeekForPrev(key);
last_op = kLastOpSeekForPrev;
op_logs += "SFP " + key.ToString(true) + " ";
} else {
iter->Seek(key);
cmp_iter->Seek(key);
last_op = kLastOpSeek;
op_logs += "S " + key.ToString(true) + " ";
}
VerifyIterator(thread, cmp_cfh, ro, iter.get(), cmp_iter.get(), last_op,
key, op_logs, &diverged);
const bool no_reverse =
Fix various failures in auto_readahead_size (#11884) Summary: 1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.` **Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator. 2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset` **Fix** - Remove prefetch_buffer to be used when uncompressed dict is read. 3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed. Received signal 6 (Aborted) Invoking GDB for stack trace... db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed` **Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884 Test Plan: Ran various flavors of crash tests locally for the whole duration Reviewed By: anand1976 Differential Revision: D49834201 Pulled By: akankshamahajan15 fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
2023-10-03 00:47:24 +00:00
(FLAGS_memtablerep == "prefix_hash" && !expect_total_order);
for (uint64_t i = 0; i < FLAGS_num_iterations && iter->Valid(); ++i) {
if (no_reverse || thread->rand.OneIn(2)) {
iter->Next();
if (!diverged) {
assert(cmp_iter->Valid());
cmp_iter->Next();
}
op_logs += "N";
} else {
iter->Prev();
if (!diverged) {
assert(cmp_iter->Valid());
cmp_iter->Prev();
}
op_logs += "P";
}
last_op = kLastOpNextOrPrev;
VerifyIterator(thread, cmp_cfh, ro, iter.get(), cmp_iter.get(), last_op,
key, op_logs, &diverged);
}
thread->stats.AddIterations(1);
op_logs += "; ";
}
return Status::OK();
}
// Test the return status of GetLiveFiles()
Status StressTest::VerifyGetLiveFiles() const {
std::vector<std::string> live_file;
uint64_t manifest_size = 0;
return db_->GetLiveFiles(live_file, &manifest_size);
}
// Test VerifyGetLiveFilesMetaData()
Status StressTest::VerifyGetLiveFilesMetaData() const {
std::vector<LiveFileMetaData> live_file_metadata;
db_->GetLiveFilesMetaData(&live_file_metadata);
return Status::OK();
}
// Test the return status of GetLiveFilesStorageInfo()
Status StressTest::VerifyGetLiveFilesStorageInfo() const {
std::vector<LiveFileStorageInfo> live_file_storage_info;
return db_->GetLiveFilesStorageInfo(LiveFilesStorageInfoOptions(),
&live_file_storage_info);
}
// Test GetAllColumnFamilyMetaData()
Status StressTest::VerifyGetAllColumnFamilyMetaData() const {
std::vector<ColumnFamilyMetaData> all_cf_metadata;
db_->GetAllColumnFamilyMetaData(&all_cf_metadata);
return Status::OK();
}
// Test the return status of GetSortedWalFiles.
Status StressTest::VerifyGetSortedWalFiles() const {
VectorLogPtr log_ptr;
return db_->GetSortedWalFiles(log_ptr);
}
// Test the return status of GetCurrentWalFile.
Status StressTest::VerifyGetCurrentWalFile() const {
std::unique_ptr<LogFile> cur_wal_file;
return db_->GetCurrentWalFile(&cur_wal_file);
}
// Compare the two iterator, iter and cmp_iter are in the same position,
// unless iter might be made invalidate or undefined because of
// upper or lower bounds, or prefix extractor.
// Will flag failure if the verification fails.
// diverged = true if the two iterator is already diverged.
// True if verification passed, false if not.
void StressTest::VerifyIterator(ThreadState* thread,
ColumnFamilyHandle* cmp_cfh,
const ReadOptions& ro, Iterator* iter,
Iterator* cmp_iter, LastIterateOp op,
const Slice& seek_key,
const std::string& op_logs, bool* diverged) {
assert(diverged);
if (*diverged) {
return;
}
if (ro.iter_start_ts != nullptr) {
assert(FLAGS_user_timestamp_size > 0);
// We currently do not verify iterator when dumping history of internal
// keys.
*diverged = true;
return;
}
if (op == kLastOpSeekToFirst && ro.iterate_lower_bound != nullptr) {
// SeekToFirst() with lower bound is not well-defined.
*diverged = true;
return;
} else if (op == kLastOpSeekToLast && ro.iterate_upper_bound != nullptr) {
// SeekToLast() with higher bound is not well-defined.
*diverged = true;
return;
} else if (op == kLastOpSeek && ro.iterate_lower_bound != nullptr &&
(options_.comparator->CompareWithoutTimestamp(
*ro.iterate_lower_bound, /*a_has_ts=*/false, seek_key,
/*b_has_ts=*/false) >= 0 ||
(ro.iterate_upper_bound != nullptr &&
options_.comparator->CompareWithoutTimestamp(
*ro.iterate_lower_bound, /*a_has_ts=*/false,
*ro.iterate_upper_bound, /*b_has_ts*/ false) >= 0))) {
// Lower bound behavior is not well-defined if it is larger than
// seek key or upper bound. Disable the check for now.
*diverged = true;
return;
} else if (op == kLastOpSeekForPrev && ro.iterate_upper_bound != nullptr &&
(options_.comparator->CompareWithoutTimestamp(
*ro.iterate_upper_bound, /*a_has_ts=*/false, seek_key,
/*b_has_ts=*/false) <= 0 ||
(ro.iterate_lower_bound != nullptr &&
options_.comparator->CompareWithoutTimestamp(
*ro.iterate_lower_bound, /*a_has_ts=*/false,
*ro.iterate_upper_bound, /*b_has_ts=*/false) >= 0))) {
// Upper bound behavior is not well-defined if it is smaller than
// seek key or lower bound. Disable the check for now.
*diverged = true;
return;
}
const SliceTransform* pe = (ro.total_order_seek || ro.auto_prefix_mode)
? nullptr
: options_.prefix_extractor.get();
const Comparator* cmp = options_.comparator;
std::ostringstream read_opt_oss;
read_opt_oss << "pin_data: " << ro.pin_data
<< ", background_purge_on_iterator_cleanup: "
<< ro.background_purge_on_iterator_cleanup
<< ", total_order_seek: " << ro.total_order_seek
<< ", auto_prefix_mode: " << ro.auto_prefix_mode
<< ", iterate_upper_bound: "
<< (ro.iterate_upper_bound
? ro.iterate_upper_bound->ToString(true).c_str()
: "")
<< ", iterate_lower_bound: "
<< (ro.iterate_lower_bound
? ro.iterate_lower_bound->ToString(true).c_str()
: "");
if (iter->Valid() && !cmp_iter->Valid()) {
if (pe != nullptr) {
if (!pe->InDomain(seek_key)) {
// Prefix seek a non-in-domain key is undefined. Skip checking for
// this scenario.
*diverged = true;
return;
} else if (!pe->InDomain(iter->key())) {
// out of range is iterator key is not in domain anymore.
*diverged = true;
return;
} else if (pe->Transform(iter->key()) != pe->Transform(seek_key)) {
*diverged = true;
return;
}
}
fprintf(stderr,
"Control iterator is invalid but iterator has key %s "
"%s under specified iterator ReadOptions: %s (Empty string or "
"missing field indicates default option or value is used)\n",
iter->key().ToString(true).c_str(), op_logs.c_str(),
read_opt_oss.str().c_str());
*diverged = true;
} else if (cmp_iter->Valid()) {
// Iterator is not valid. It can be legitimate if it has already been
// out of upper or lower bound, or filtered out by prefix iterator.
const Slice& total_order_key = cmp_iter->key();
if (pe != nullptr) {
if (!pe->InDomain(seek_key)) {
// Prefix seek a non-in-domain key is undefined. Skip checking for
// this scenario.
*diverged = true;
return;
}
if (!pe->InDomain(total_order_key) ||
pe->Transform(total_order_key) != pe->Transform(seek_key)) {
// If the prefix is exhausted, the only thing needs to check
// is the iterator isn't return a position in prefix.
// Either way, checking can stop from here.
*diverged = true;
if (!iter->Valid() || !pe->InDomain(iter->key()) ||
pe->Transform(iter->key()) != pe->Transform(seek_key)) {
return;
}
fprintf(stderr,
"Iterator stays in prefix but control doesn't"
" iterator key %s control iterator key %s %s under specified "
"iterator ReadOptions: %s (Empty string or "
"missing field indicates default option or value is used)\n",
iter->key().ToString(true).c_str(),
cmp_iter->key().ToString(true).c_str(), op_logs.c_str(),
read_opt_oss.str().c_str());
}
}
// Check upper or lower bounds.
if (!*diverged) {
if ((iter->Valid() && iter->key() != cmp_iter->key()) ||
(!iter->Valid() &&
(ro.iterate_upper_bound == nullptr ||
cmp->CompareWithoutTimestamp(total_order_key, /*a_has_ts=*/false,
*ro.iterate_upper_bound,
/*b_has_ts=*/false) < 0) &&
(ro.iterate_lower_bound == nullptr ||
cmp->CompareWithoutTimestamp(total_order_key, /*a_has_ts=*/false,
*ro.iterate_lower_bound,
/*b_has_ts=*/false) > 0))) {
fprintf(stderr,
"Iterator diverged from control iterator which"
" has value %s %s under specified iterator ReadOptions: %s "
"(Empty string or "
"missing field indicates default option or value is used)\n",
total_order_key.ToString(true).c_str(), op_logs.c_str(),
read_opt_oss.str().c_str());
if (iter->Valid()) {
fprintf(stderr, "iterator has value %s\n",
iter->key().ToString(true).c_str());
} else {
Fix various failures in auto_readahead_size (#11884) Summary: 1. **Error** in TestIterateAgainstExpected API - `Assertion index < pre_read_expected_values.size() && index < post_read_expected_values.size() failed.` **Fix** - `Prev` op is not supported with `auto_readahead_size`. So added support to Reseek in db_iter, if Prev is called. In BlockBasedTableIterator, index_iter_ already moves forward. So there is no way to do Prev from BlockBasedTableIterator. 2. **Error** - `void rocksdb::BlockBasedTableIterator::BlockCacheLookupForReadAheadSize(uint64_t, size_t, size_t&): Assertion index_iter_->value().handle.offset() == offset` **Fix** - Remove prefetch_buffer to be used when uncompressed dict is read. 3. ** Error in TestPrefixScan API - `db_stress: db/db_iter.cc:369: bool rocksdb::DBIter::FindNextUserEntryInternal(bool, const rocksdb::Slice*): Assertion !skipping_saved_key || CompareKeyForSkip(ikey_.user_key, saved_key_.GetUserKey()) > 0 failed. Received signal 6 (Aborted) Invoking GDB for stack trace... db_stress: table/merging_iterator.cc:1036: bool rocksdb::MergingIterator::SkipNextDeleted(): Assertion comparator_->Compare(range_tombstone_iters_[i]->start_key(), pik) <= 0 failed` **Fix** - SeekPrev also calls 1) SeekPrev , 2)Seek and then 3)Prev in some cases in db_iter.cc leading to failure of Prev operation. These backward operations also call Seek. Added direction to disable lookup once direction is backwards in BlockBasedTableIterator.cc Pull Request resolved: https://github.com/facebook/rocksdb/pull/11884 Test Plan: Ran various flavors of crash tests locally for the whole duration Reviewed By: anand1976 Differential Revision: D49834201 Pulled By: akankshamahajan15 fbshipit-source-id: 9a007b4d46a48002c43dc4623a400ecf47d997fe
2023-10-03 00:47:24 +00:00
fprintf(stderr, "iterator is not valid with status: %s\n",
iter->status().ToString().c_str());
}
*diverged = true;
}
}
}
if (!*diverged && iter->Valid()) {
if (!VerifyWideColumns(iter->value(), iter->columns())) {
fprintf(stderr,
"Value and columns inconsistent for iterator: value: %s, "
"columns: %s\n",
iter->value().ToString(/* hex */ true).c_str(),
WideColumnsToHex(iter->columns()).c_str());
*diverged = true;
}
}
if (*diverged) {
fprintf(stderr, "VerifyIterator failed. Control CF %s\n",
cmp_cfh->GetName().c_str());
thread->stats.AddErrors(1);
// Fail fast to preserve the DB state.
thread->shared->SetVerificationFailure();
}
}
Status StressTest::TestBackupRestore(
ThreadState* thread, const std::vector<int>& rand_column_families,
const std::vector<int64_t>& rand_keys) {
std::vector<std::unique_ptr<MutexLock>> locks;
if (ShouldAcquireMutexOnKey()) {
for (int rand_column_family : rand_column_families) {
// `rand_keys[0]` on each chosen CF will be verified.
locks.emplace_back(new MutexLock(
thread->shared->GetMutexForKey(rand_column_family, rand_keys[0])));
}
}
const std::string backup_dir =
FLAGS_db + "/.backup" + std::to_string(thread->tid);
const std::string restore_dir =
FLAGS_db + "/.restore" + std::to_string(thread->tid);
BackupEngineOptions backup_opts(backup_dir);
// For debugging, get info_log from live options
backup_opts.info_log = db_->GetDBOptions().info_log.get();
if (thread->rand.OneIn(10)) {
backup_opts.share_table_files = false;
} else {
backup_opts.share_table_files = true;
if (thread->rand.OneIn(5)) {
backup_opts.share_files_with_checksum = false;
} else {
backup_opts.share_files_with_checksum = true;
if (thread->rand.OneIn(2)) {
// old
Restore file size in backup table file names (and other cleanup) (#7400) Summary: Prior to 6.12, backup files using share_files_with_checksum had the file size encoded in the file name, after the last '\_' and before the last '.'. We considered this an implementation detail subject to change, and indeed removed this information from the file name (with an option to use old behavior) because it was considered ineffective/inefficient for file name uniqueness. However, some downstream RocksDB users were relying on this information since the file size is not explicitly in the backup manifest file. This primary purpose of this change is "retrofitting" the 6.12 release (not yet a public release) to simultaneously support the benefits of the new naming scheme (I/O performance and data correctness at scale) and preserve the file size information, both as default behaviors. With this change, we are essentially making the file size information encoded in the file name an official, though obscure, extension of the backup meta file format. We preserve an option (kLegacyCrc32cAndFileSize) to use the original "legacy" naming scheme, with its caveats, and make it easy to omit the file size information (no kFlagIncludeFileSize), for more compact file names. But note that changing the naming scheme used on an existing db and backup directory can lead to transient space amplification, as some files will be stored under two names in the shared_checksum directory. Because some backups were saved using the original 6.12 naming scheme, we offer two ways of dealing with those files: SST files generated by older 6.12 versions can either use the default naming scheme in effect when the SST files were generated (kFlagMatchInterimNaming, default, no transient space amplification) or can use a new naming scheme (no kFlagMatchInterimNaming, potential space amplification because some already stored files getting a new name). We don't have a natural way to detect which files were generated by previous 6.12 versions, but this change hacks one in by changing DB session ids to now use a more concise encoding, reducing file name length, saving ~dozen bytes from SST files, and making them visually distinct from DB ids so that they are less likely to be mixed up. Two final auxiliary notes: Recognizing that the backup file names have become a de facto part of the backup meta schema, this change makes them easier to parse and extend by putting a distinct marker, 's', before DB session ids embedded in the name. When we extend this to allow custom checksums in the name, they can get their own marker to ensure safe parsing. For backward compatibility, file size does not get a marker but is assumed for `_[0-9]+[.]` Another change from initial 6.12 default behavior is never including file custom checksum in the file name. Looking ahead to 6.13, we do not want the default behavior to cause backup space amplification for someone turning on file custom checksum checking in BackupEngine; we want that to be an easy decision. When implemented, including file custom checksums in backup file names will be a non-default option. Actual file name patterns and priorities, as regexes: kLegacyCrc32cAndFileSize OR pre-6.12 SST file -> [0-9]+_[0-9]+_[0-9]+[.]sst kFlagMatchInterimNaming set (default) AND early 6.12 SST file -> [0-9]+_[0-9a-fA-F-]+[.]sst kUseDbSessionId AND NOT kFlagIncludeFileSize -> [0-9]+_s[0-9A-Z]{20}[.]sst kUseDbSessionId AND kFlagIncludeFileSize (default) -> [0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst We might add opt-in options for more '\_' separated data in the name, but embedded file size, if present, will always be after last '\_' and before '.sst'. This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400 Test Plan: unit tests included. Sync point callbacks are used to mimic previous version SST files. Reviewed By: ajkr Differential Revision: D23759587 Pulled By: pdillinger fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
2020-09-17 17:22:56 +00:00
backup_opts.share_files_with_checksum_naming =
BackupEngineOptions::kLegacyCrc32cAndFileSize;
} else {
// new
backup_opts.share_files_with_checksum_naming =
BackupEngineOptions::kUseDbSessionId;
Restore file size in backup table file names (and other cleanup) (#7400) Summary: Prior to 6.12, backup files using share_files_with_checksum had the file size encoded in the file name, after the last '\_' and before the last '.'. We considered this an implementation detail subject to change, and indeed removed this information from the file name (with an option to use old behavior) because it was considered ineffective/inefficient for file name uniqueness. However, some downstream RocksDB users were relying on this information since the file size is not explicitly in the backup manifest file. This primary purpose of this change is "retrofitting" the 6.12 release (not yet a public release) to simultaneously support the benefits of the new naming scheme (I/O performance and data correctness at scale) and preserve the file size information, both as default behaviors. With this change, we are essentially making the file size information encoded in the file name an official, though obscure, extension of the backup meta file format. We preserve an option (kLegacyCrc32cAndFileSize) to use the original "legacy" naming scheme, with its caveats, and make it easy to omit the file size information (no kFlagIncludeFileSize), for more compact file names. But note that changing the naming scheme used on an existing db and backup directory can lead to transient space amplification, as some files will be stored under two names in the shared_checksum directory. Because some backups were saved using the original 6.12 naming scheme, we offer two ways of dealing with those files: SST files generated by older 6.12 versions can either use the default naming scheme in effect when the SST files were generated (kFlagMatchInterimNaming, default, no transient space amplification) or can use a new naming scheme (no kFlagMatchInterimNaming, potential space amplification because some already stored files getting a new name). We don't have a natural way to detect which files were generated by previous 6.12 versions, but this change hacks one in by changing DB session ids to now use a more concise encoding, reducing file name length, saving ~dozen bytes from SST files, and making them visually distinct from DB ids so that they are less likely to be mixed up. Two final auxiliary notes: Recognizing that the backup file names have become a de facto part of the backup meta schema, this change makes them easier to parse and extend by putting a distinct marker, 's', before DB session ids embedded in the name. When we extend this to allow custom checksums in the name, they can get their own marker to ensure safe parsing. For backward compatibility, file size does not get a marker but is assumed for `_[0-9]+[.]` Another change from initial 6.12 default behavior is never including file custom checksum in the file name. Looking ahead to 6.13, we do not want the default behavior to cause backup space amplification for someone turning on file custom checksum checking in BackupEngine; we want that to be an easy decision. When implemented, including file custom checksums in backup file names will be a non-default option. Actual file name patterns and priorities, as regexes: kLegacyCrc32cAndFileSize OR pre-6.12 SST file -> [0-9]+_[0-9]+_[0-9]+[.]sst kFlagMatchInterimNaming set (default) AND early 6.12 SST file -> [0-9]+_[0-9a-fA-F-]+[.]sst kUseDbSessionId AND NOT kFlagIncludeFileSize -> [0-9]+_s[0-9A-Z]{20}[.]sst kUseDbSessionId AND kFlagIncludeFileSize (default) -> [0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst We might add opt-in options for more '\_' separated data in the name, but embedded file size, if present, will always be after last '\_' and before '.sst'. This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400 Test Plan: unit tests included. Sync point callbacks are used to mimic previous version SST files. Reviewed By: ajkr Differential Revision: D23759587 Pulled By: pdillinger fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
2020-09-17 17:22:56 +00:00
}
if (thread->rand.OneIn(2)) {
backup_opts.share_files_with_checksum_naming =
backup_opts.share_files_with_checksum_naming |
BackupEngineOptions::kFlagIncludeFileSize;
Restore file size in backup table file names (and other cleanup) (#7400) Summary: Prior to 6.12, backup files using share_files_with_checksum had the file size encoded in the file name, after the last '\_' and before the last '.'. We considered this an implementation detail subject to change, and indeed removed this information from the file name (with an option to use old behavior) because it was considered ineffective/inefficient for file name uniqueness. However, some downstream RocksDB users were relying on this information since the file size is not explicitly in the backup manifest file. This primary purpose of this change is "retrofitting" the 6.12 release (not yet a public release) to simultaneously support the benefits of the new naming scheme (I/O performance and data correctness at scale) and preserve the file size information, both as default behaviors. With this change, we are essentially making the file size information encoded in the file name an official, though obscure, extension of the backup meta file format. We preserve an option (kLegacyCrc32cAndFileSize) to use the original "legacy" naming scheme, with its caveats, and make it easy to omit the file size information (no kFlagIncludeFileSize), for more compact file names. But note that changing the naming scheme used on an existing db and backup directory can lead to transient space amplification, as some files will be stored under two names in the shared_checksum directory. Because some backups were saved using the original 6.12 naming scheme, we offer two ways of dealing with those files: SST files generated by older 6.12 versions can either use the default naming scheme in effect when the SST files were generated (kFlagMatchInterimNaming, default, no transient space amplification) or can use a new naming scheme (no kFlagMatchInterimNaming, potential space amplification because some already stored files getting a new name). We don't have a natural way to detect which files were generated by previous 6.12 versions, but this change hacks one in by changing DB session ids to now use a more concise encoding, reducing file name length, saving ~dozen bytes from SST files, and making them visually distinct from DB ids so that they are less likely to be mixed up. Two final auxiliary notes: Recognizing that the backup file names have become a de facto part of the backup meta schema, this change makes them easier to parse and extend by putting a distinct marker, 's', before DB session ids embedded in the name. When we extend this to allow custom checksums in the name, they can get their own marker to ensure safe parsing. For backward compatibility, file size does not get a marker but is assumed for `_[0-9]+[.]` Another change from initial 6.12 default behavior is never including file custom checksum in the file name. Looking ahead to 6.13, we do not want the default behavior to cause backup space amplification for someone turning on file custom checksum checking in BackupEngine; we want that to be an easy decision. When implemented, including file custom checksums in backup file names will be a non-default option. Actual file name patterns and priorities, as regexes: kLegacyCrc32cAndFileSize OR pre-6.12 SST file -> [0-9]+_[0-9]+_[0-9]+[.]sst kFlagMatchInterimNaming set (default) AND early 6.12 SST file -> [0-9]+_[0-9a-fA-F-]+[.]sst kUseDbSessionId AND NOT kFlagIncludeFileSize -> [0-9]+_s[0-9A-Z]{20}[.]sst kUseDbSessionId AND kFlagIncludeFileSize (default) -> [0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst We might add opt-in options for more '\_' separated data in the name, but embedded file size, if present, will always be after last '\_' and before '.sst'. This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400 Test Plan: unit tests included. Sync point callbacks are used to mimic previous version SST files. Reviewed By: ajkr Differential Revision: D23759587 Pulled By: pdillinger fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
2020-09-17 17:22:56 +00:00
}
}
}
New backup meta schema, with file temperatures (#9660) Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
2022-03-18 18:06:17 +00:00
if (thread->rand.OneIn(2)) {
backup_opts.schema_version = 1;
} else {
backup_opts.schema_version = 2;
}
if (thread->rand.OneIn(3)) {
backup_opts.max_background_operations = 16;
} else {
backup_opts.max_background_operations = 1;
}
if (thread->rand.OneIn(2)) {
backup_opts.backup_rate_limiter.reset(NewGenericRateLimiter(
FLAGS_backup_max_size * 1000000 /* rate_bytes_per_sec */,
1 /* refill_period_us */));
}
if (thread->rand.OneIn(2)) {
backup_opts.restore_rate_limiter.reset(NewGenericRateLimiter(
FLAGS_backup_max_size * 1000000 /* rate_bytes_per_sec */,
1 /* refill_period_us */));
}
backup_opts.current_temperatures_override_manifest = thread->rand.OneIn(2);
std::ostringstream backup_opt_oss;
backup_opt_oss << "share_table_files: " << backup_opts.share_table_files
<< ", share_files_with_checksum: "
<< backup_opts.share_files_with_checksum
<< ", share_files_with_checksum_naming: "
<< backup_opts.share_files_with_checksum_naming
<< ", schema_version: " << backup_opts.schema_version
<< ", max_background_operations: "
<< backup_opts.max_background_operations
<< ", backup_rate_limiter: "
<< backup_opts.backup_rate_limiter.get()
<< ", restore_rate_limiter: "
<< backup_opts.restore_rate_limiter.get()
<< ", current_temperatures_override_manifest: "
<< backup_opts.current_temperatures_override_manifest;
std::ostringstream create_backup_opt_oss;
std::ostringstream restore_opts_oss;
BackupEngine* backup_engine = nullptr;
std::string from = "a backup/restore operation";
Status s = BackupEngine::Open(db_stress_env, backup_opts, &backup_engine);
if (!s.ok()) {
from = "BackupEngine::Open";
}
if (s.ok()) {
New backup meta schema, with file temperatures (#9660) Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
2022-03-18 18:06:17 +00:00
if (backup_opts.schema_version >= 2 && thread->rand.OneIn(2)) {
TEST_BackupMetaSchemaOptions test_opts;
Begin forward compatibility for new backup meta schema (#8069) Summary: This does not add any new public APIs or published functionality, but adds the ability to read and use (and in tests, write) backups with a new meta file schema, based on the old schema but not forward-compatible (before this change). The new schema enables some capabilities not in the old: * Explicit versioning, so that users get clean error messages the next time we want to break forward compatibility. * Ignoring unrecognized fields (with warning), so that new non-critical features can be added without breaking forward compatibility. * Rejecting future "non-ignorable" fields, so that new features critical to some use-cases could potentially be added outside of linear schema versions, with broken forward compatibility. * Fields at the end of the meta file, such as for checksum of the meta file's contents (up to that point) * New optional 'size' field for each file, which is checked when present * Optionally omitting 'crc32' field, so that we aren't required to have a crc32c checksum for files to take a backup. (E.g. to support backup via hard links and to better support file custom checksums.) Because we do not have a JSON parser and to share code, the new schema is simply derived from the old schema. BackupEngine code is updated to allow missing checksums in some places, and to make that easier, `has_checksum` and `verify_checksum_after_work` are eliminated. Empty `checksum_hex` indicates checksum is unknown. I'm not too afraid of regressing on data integrity, because (a) we have pretty good test coverage of corruption detection in backups, and (b) we are increasingly relying on the DB itself for data integrity rather than it being an exclusive feature of backups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8069 Test Plan: new unit tests, added to crash test (some local run with boosted backup probability) Reviewed By: ajkr Differential Revision: D27139824 Pulled By: pdillinger fbshipit-source-id: 9e0e4decfb42bb84783d64d2d246456d97e8e8c5
2021-03-20 03:14:38 +00:00
test_opts.crc32c_checksums = thread->rand.OneIn(2) == 0;
test_opts.file_sizes = thread->rand.OneIn(2) == 0;
New backup meta schema, with file temperatures (#9660) Summary: The primary goal of this change is to add support for backing up and restoring (applying on restore) file temperature metadata, without committing to either the DB manifest or the FS reported "current" temperatures being exclusive "source of truth". To achieve this goal, we need to add temperature information to backup metadata, which requires updated backup meta schema. Fortunately I prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version 6.19.0 for this kind of schema update. (Previously, backup meta schema was not extensible! Making this schema update public will allow some other "nice to have" features like taking backups with hard links, and avoiding crc32c checksum computation when another checksum is already available.) While schema version 2 is newly public, the default schema version is still 1. Until we change the default, users will need to set to 2 to enable features like temperature data backup+restore. New metadata like temperature information will be ignored with a warning in versions before this change and since 6.19.0. The metadata is considered ignorable because a functioning DB can be restored without it. Some detail: * Some renaming because "future schema" is now just public schema 2. * Initialize some atomics in TestFs (linter reported) * Add temperature hint support to SstFileDumper (used by BackupEngine) Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660 Test Plan: related unit test majorly updated for the new functionality, including some shared testing support for tracking temperatures in a FS. Some other tests and testing hooks into production code also updated for making the backup meta schema change public. Reviewed By: ajkr Differential Revision: D34686968 Pulled By: pdillinger fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
2022-03-18 18:06:17 +00:00
TEST_SetBackupMetaSchemaOptions(backup_engine, test_opts);
Begin forward compatibility for new backup meta schema (#8069) Summary: This does not add any new public APIs or published functionality, but adds the ability to read and use (and in tests, write) backups with a new meta file schema, based on the old schema but not forward-compatible (before this change). The new schema enables some capabilities not in the old: * Explicit versioning, so that users get clean error messages the next time we want to break forward compatibility. * Ignoring unrecognized fields (with warning), so that new non-critical features can be added without breaking forward compatibility. * Rejecting future "non-ignorable" fields, so that new features critical to some use-cases could potentially be added outside of linear schema versions, with broken forward compatibility. * Fields at the end of the meta file, such as for checksum of the meta file's contents (up to that point) * New optional 'size' field for each file, which is checked when present * Optionally omitting 'crc32' field, so that we aren't required to have a crc32c checksum for files to take a backup. (E.g. to support backup via hard links and to better support file custom checksums.) Because we do not have a JSON parser and to share code, the new schema is simply derived from the old schema. BackupEngine code is updated to allow missing checksums in some places, and to make that easier, `has_checksum` and `verify_checksum_after_work` are eliminated. Empty `checksum_hex` indicates checksum is unknown. I'm not too afraid of regressing on data integrity, because (a) we have pretty good test coverage of corruption detection in backups, and (b) we are increasingly relying on the DB itself for data integrity rather than it being an exclusive feature of backups. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8069 Test Plan: new unit tests, added to crash test (some local run with boosted backup probability) Reviewed By: ajkr Differential Revision: D27139824 Pulled By: pdillinger fbshipit-source-id: 9e0e4decfb42bb84783d64d2d246456d97e8e8c5
2021-03-20 03:14:38 +00:00
}
CreateBackupOptions create_opts;
if (FLAGS_disable_wal) {
// The verification can only work when latest value of `key` is backed up,
// which requires flushing in case of WAL disabled.
//
// Note this triggers a flush with a key lock held. Meanwhile, operations
// like flush/compaction may attempt to grab key locks like in
// `DbStressCompactionFilter`. The philosophy around preventing deadlock
// is the background operation key lock acquisition only tries but does
// not wait for the lock. So here in the foreground it is OK to hold the
// lock and wait on a background operation (flush).
create_opts.flush_before_backup = true;
}
create_opts.decrease_background_thread_cpu_priority = thread->rand.OneIn(2);
create_opts.background_thread_cpu_priority = static_cast<CpuPriority>(
thread->rand.Next() % (static_cast<int>(CpuPriority::kHigh) + 1));
create_backup_opt_oss << "flush_before_backup: "
<< create_opts.flush_before_backup
<< ", decrease_background_thread_cpu_priority: "
<< create_opts.decrease_background_thread_cpu_priority
<< ", background_thread_cpu_priority: "
<< static_cast<int>(
create_opts.background_thread_cpu_priority);
s = backup_engine->CreateNewBackup(create_opts, db_);
if (!s.ok()) {
from = "BackupEngine::CreateNewBackup";
}
}
if (s.ok()) {
delete backup_engine;
backup_engine = nullptr;
s = BackupEngine::Open(db_stress_env, backup_opts, &backup_engine);
if (!s.ok()) {
from = "BackupEngine::Open (again)";
}
}
std::vector<BackupInfo> backup_info;
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
// If inplace_not_restore, we verify the backup by opening it as a
// read-only DB. If !inplace_not_restore, we restore it to a temporary
// directory for verification.
bool inplace_not_restore = thread->rand.OneIn(3);
if (s.ok()) {
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
backup_engine->GetBackupInfo(&backup_info,
/*include_file_details*/ inplace_not_restore);
if (backup_info.empty()) {
s = Status::NotFound("no backups found");
from = "BackupEngine::GetBackupInfo";
}
}
if (s.ok() && thread->rand.OneIn(2)) {
s = backup_engine->VerifyBackup(
backup_info.front().backup_id,
thread->rand.OneIn(2) /* verify_with_checksum */);
if (!s.ok()) {
from = "BackupEngine::VerifyBackup";
}
}
const bool allow_persistent = thread->tid == 0; // not too many
bool from_latest = false;
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
int count = static_cast<int>(backup_info.size());
RestoreOptions restore_options;
restore_options.keep_log_files = thread->rand.OneIn(2);
restore_opts_oss << "keep_log_files: " << restore_options.keep_log_files;
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
if (s.ok() && !inplace_not_restore) {
if (count > 1) {
s = backup_engine->RestoreDBFromBackup(
restore_options, backup_info[thread->rand.Uniform(count)].backup_id,
restore_dir /* db_dir */, restore_dir /* wal_dir */);
if (!s.ok()) {
from = "BackupEngine::RestoreDBFromBackup";
}
} else {
from_latest = true;
s = backup_engine->RestoreDBFromLatestBackup(
restore_options, restore_dir /* db_dir */, restore_dir /* wal_dir */);
if (!s.ok()) {
from = "BackupEngine::RestoreDBFromLatestBackup";
}
}
}
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
if (s.ok() && !inplace_not_restore) {
// Purge early if restoring, to ensure the restored directory doesn't
// have some secret dependency on the backup directory.
uint32_t to_keep = 0;
if (allow_persistent) {
// allow one thread to keep up to 2 backups
to_keep = thread->rand.Uniform(3);
}
s = backup_engine->PurgeOldBackups(to_keep);
if (!s.ok()) {
from = "BackupEngine::PurgeOldBackups";
}
}
DB* restored_db = nullptr;
std::vector<ColumnFamilyHandle*> restored_cf_handles;
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
// Not yet implemented: opening restored BlobDB or TransactionDB
Options db_opt;
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
if (s.ok() && !FLAGS_use_txn && !FLAGS_use_blob_db) {
s = PrepareOptionsForRestoredDB(&db_opt);
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
if (!s.ok()) {
from = "PrepareRestoredDBOptions in backup/restore";
}
}
if (s.ok() && !FLAGS_use_txn && !FLAGS_use_blob_db) {
std::vector<ColumnFamilyDescriptor> cf_descriptors;
// TODO(ajkr): `column_family_names_` is not safe to access here when
// `clear_column_family_one_in != 0`. But we can't easily switch to
// `ListColumnFamilies` to get names because it won't necessarily give
// the same order as `column_family_names_`.
assert(FLAGS_clear_column_family_one_in == 0);
for (const auto& name : column_family_names_) {
cf_descriptors.emplace_back(name, ColumnFamilyOptions(db_opt));
}
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
if (inplace_not_restore) {
BackupInfo& info = backup_info[thread->rand.Uniform(count)];
db_opt.env = info.env_for_open.get();
s = DB::OpenForReadOnly(DBOptions(db_opt), info.name_for_open,
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
cf_descriptors, &restored_cf_handles,
&restored_db);
if (!s.ok()) {
from = "DB::OpenForReadOnly in backup/restore";
}
} else {
s = DB::Open(DBOptions(db_opt), restore_dir, cf_descriptors,
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
&restored_cf_handles, &restored_db);
if (!s.ok()) {
from = "DB::Open in backup/restore";
}
}
}
// Note the column families chosen by `rand_column_families` cannot be
// dropped while the locks for `rand_keys` are held. So we should not have
// to worry about accessing those column families throughout this function.
//
// For simplicity, currently only verifies existence/non-existence of a
// single key
for (size_t i = 0; restored_db && s.ok() && i < rand_column_families.size();
++i) {
std::string key_str = Key(rand_keys[0]);
Slice key = key_str;
std::string restored_value;
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
// This `ReadOptions` is for validation purposes. Ignore
// `FLAGS_rate_limit_user_ops` to avoid slowing any validation.
ReadOptions read_opts;
std::string ts_str;
Slice ts;
if (FLAGS_user_timestamp_size > 0) {
ts_str = GetNowNanos();
ts = ts_str;
read_opts.timestamp = &ts;
}
Status get_status = restored_db->Get(
read_opts, restored_cf_handles[rand_column_families[i]], key,
&restored_value);
bool exists = thread->shared->Exists(rand_column_families[i], rand_keys[0]);
if (get_status.ok()) {
if (!exists && from_latest && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true)
<< " exists in restore but not in original db";
s = Status::Corruption(oss.str());
}
} else if (get_status.IsNotFound()) {
if (exists && from_latest && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true)
<< " exists in original db but not in restore";
s = Status::Corruption(oss.str());
}
} else {
s = get_status;
if (!s.ok()) {
from = "DB::Get in backup/restore";
}
}
}
if (restored_db != nullptr) {
for (auto* cf_handle : restored_cf_handles) {
restored_db->DestroyColumnFamilyHandle(cf_handle);
}
delete restored_db;
restored_db = nullptr;
}
Make backups openable as read-only DBs (#8142) Summary: A current limitation of backups is that you don't know the exact database state of when the backup was taken. With this new feature, you can at least inspect the backup's DB state without restoring it by opening it as a read-only DB. Rather than add something like OpenAsReadOnlyDB to the BackupEngine API, which would inhibit opening stackable DB implementations read-only (if/when their APIs support it), we instead provide a DB name and Env that can be used to open as a read-only DB. Possible follow-up work: * Add a version of GetBackupInfo for a single backup. * Let CreateNewBackup return the BackupID of the newly-created backup. Implementation details: Refactored ChrootFileSystem to split off new base class RemapFileSystem, which allows more general remapping of files. We use this base class to implement BackupEngineImpl::RemapSharedFileSystem. To minimize API impact, I decided to just add these fields `name_for_open` and `env_for_open` to those set by GetBackupInfo when include_file_details=true. Creating the RemapSharedFileSystem adds a bit to the memory consumption, perhaps unnecessarily in some cases, but this has been mitigated by (a) only initialize the RemapSharedFileSystem lazily when GetBackupInfo with include_file_details=true is called, and (b) using the existing `shared_ptr<FileInfo>` objects to hold most of the mapping data. To enhance API safety, RemapSharedFileSystem is wrapped by new ReadOnlyFileSystem which rejects any attempts to write. This uncovered a couple of places in which DB::OpenForReadOnly would write to the filesystem, so I fixed these. Added a release note because this affects logging. Additional minor refactoring in backupable_db.cc to support the new functionality. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142 Test Plan: new test (run with ASAN and UBSAN), added to stress test and ran it for a while with amplified backup_one_in Reviewed By: ajkr Differential Revision: D27535408 Pulled By: pdillinger fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
2021-04-06 21:36:45 +00:00
if (s.ok() && inplace_not_restore) {
// Purge late if inplace open read-only
uint32_t to_keep = 0;
if (allow_persistent) {
// allow one thread to keep up to 2 backups
to_keep = thread->rand.Uniform(3);
}
s = backup_engine->PurgeOldBackups(to_keep);
if (!s.ok()) {
from = "BackupEngine::PurgeOldBackups";
}
}
if (backup_engine != nullptr) {
delete backup_engine;
backup_engine = nullptr;
}
if (s.ok()) {
// Preserve directories on failure, or allowed persistent backup
if (!allow_persistent) {
s = DestroyDir(db_stress_env, backup_dir);
if (!s.ok()) {
from = "Destroy backup dir";
}
}
}
if (s.ok()) {
s = DestroyDir(db_stress_env, restore_dir);
if (!s.ok()) {
from = "Destroy restore dir";
}
}
if (!s.ok() && (!s.IsIOError() || !std::strstr(s.getState(), "injected"))) {
fprintf(stderr,
"Failure in %s with: %s under specified BackupEngineOptions: %s, "
"CreateBackupOptions: %s, RestoreOptions: %s (Empty string or "
"missing field indicates default option or value is used)\n",
from.c_str(), s.ToString().c_str(), backup_opt_oss.str().c_str(),
create_backup_opt_oss.str().c_str(),
restore_opts_oss.str().c_str());
}
return s;
}
Initialize merge operator explicitly in PrepareOptionsForRestoredDB() (#12033) Summary: We are seeing the following stress test failure: `Failure in DB::Get in backup/restore with: Invalid argument: merge_operator is not properly initialized. Verification failed: Backup/restore failed: Invalid argument: merge_operator is not properly initialized.`. The reason is likely that `GetColumnFamilyOptionsFromString()` does not set merge operator if it's a customized merge operator. Fixing it by initializing merge operator explicitly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12033 Test Plan: this repro gives the error consistently before this PR ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --atomic_flush=1 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=1048576000000 --backup_one_in=50 --batch_protection_bytes_per_key=8 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=31.014388066505518 --bottommost_compression_type=lz4hc --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=fixed_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_readahead_size=0 --compaction_ttl=10 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=4095 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=10 --index_type=2 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=8388608 --memtable_max_range_deletions=1000 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=2 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=0 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --set_options_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --subcompactions=1 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=10 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=35 ``` Reviewed By: hx235 Differential Revision: D50825558 Pulled By: cbi42 fbshipit-source-id: 8468dc0444c112415a515af8291ef3abec8a42de
2023-10-31 14:39:41 +00:00
void InitializeMergeOperator(Options& options) {
if (FLAGS_use_full_merge_v1) {
options.merge_operator = MergeOperators::CreateDeprecatedPutOperator();
} else {
if (FLAGS_use_put_entity_one_in > 0) {
options.merge_operator = std::make_shared<DBStressWideMergeOperator>();
} else {
options.merge_operator = MergeOperators::CreatePutOperator();
}
}
}
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
Status StressTest::PrepareOptionsForRestoredDB(Options* options) {
assert(options);
// To avoid race with other threads' operations (e.g, SetOptions())
// on the same pointer sub-option (e.g, `std::shared_ptr<const FilterPolicy>
// filter_policy`) while having the same settings as `options_`, we create a
// new Options object from `options_`'s string to deep copy these pointer
// sub-options
Status s;
ConfigOptions config_opts;
std::string db_options_str;
s = GetStringFromDBOptions(config_opts, options_, &db_options_str);
if (!s.ok()) {
return s;
}
DBOptions db_options;
s = GetDBOptionsFromString(config_opts, Options(), db_options_str,
&db_options);
if (!s.ok()) {
return s;
}
std::string cf_options_str;
s = GetStringFromColumnFamilyOptions(config_opts, options_, &cf_options_str);
if (!s.ok()) {
return s;
}
ColumnFamilyOptions cf_options;
s = GetColumnFamilyOptionsFromString(config_opts, Options(), cf_options_str,
&cf_options);
if (!s.ok()) {
return s;
}
*options = Options(db_options, cf_options);
options->best_efforts_recovery = false;
options->listeners.clear();
// Avoid dangling/shared file descriptors, for reliable destroy
options->sst_file_manager = nullptr;
Save the correct user comparator name in OPTIONS file (#12037) Summary: I noticed the user comparator name in OPTIONS file can be incorrect when working on a recent stress test failure. The name of the comparator retrieved via the "Comparator::GetRootComparator" API is saved in OPTIONS file as the user comparator. The intention was to get the user comparator wrapped in the internal comparator. However `ImmutableCFOptions.user_comparator` has always been a user comparator of type `Comparator`. The corresponding `GetRootComparator` API is also defined only for user comparator type `Comparator`, not the internal key comparator type `InternalKeyComparator`. For built in comparator `BytewiseComparator` and `ReverseBytewiseComparator`, there is no difference between `Comparator::Name` and `Comparator::GetRootComparator::Name` because these built in comparators' root comparator is themselves. However, for built in comparator `BytewiseComparatorWithU64Ts` and `ReverseBytewiseComparatorWithU64Ts`, there are differences. So this change update the logic to persist the user comparator's name, not its root comparator's name. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12037 Test Plan: The restore flow in stress test, which relies on converting Options object to string and back to Options object is updated to help validate comparator object can be correctly serialized and deserialized with the OPTIONS file mechanism Updated unit test to use a comparator that has a root comparator that is not itself. Reviewed By: cbi42 Differential Revision: D50909750 Pulled By: jowlyzhang fbshipit-source-id: 9086d7135c7a6f4b5565fb47fce194ea0a024f52
2023-11-02 20:27:59 +00:00
// GetColumnFamilyOptionsFromString does not create customized merge operator.
Initialize merge operator explicitly in PrepareOptionsForRestoredDB() (#12033) Summary: We are seeing the following stress test failure: `Failure in DB::Get in backup/restore with: Invalid argument: merge_operator is not properly initialized. Verification failed: Backup/restore failed: Invalid argument: merge_operator is not properly initialized.`. The reason is likely that `GetColumnFamilyOptionsFromString()` does not set merge operator if it's a customized merge operator. Fixing it by initializing merge operator explicitly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12033 Test Plan: this repro gives the error consistently before this PR ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --atomic_flush=1 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=1048576000000 --backup_one_in=50 --batch_protection_bytes_per_key=8 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=31.014388066505518 --bottommost_compression_type=lz4hc --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=fixed_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_readahead_size=0 --compaction_ttl=10 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=4095 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=10 --index_type=2 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=8388608 --memtable_max_range_deletions=1000 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=2 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=0 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --set_options_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --subcompactions=1 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=10 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=35 ``` Reviewed By: hx235 Differential Revision: D50825558 Pulled By: cbi42 fbshipit-source-id: 8468dc0444c112415a515af8291ef3abec8a42de
2023-10-31 14:39:41 +00:00
InitializeMergeOperator(*options);
if (FLAGS_user_timestamp_size > 0) {
Save the correct user comparator name in OPTIONS file (#12037) Summary: I noticed the user comparator name in OPTIONS file can be incorrect when working on a recent stress test failure. The name of the comparator retrieved via the "Comparator::GetRootComparator" API is saved in OPTIONS file as the user comparator. The intention was to get the user comparator wrapped in the internal comparator. However `ImmutableCFOptions.user_comparator` has always been a user comparator of type `Comparator`. The corresponding `GetRootComparator` API is also defined only for user comparator type `Comparator`, not the internal key comparator type `InternalKeyComparator`. For built in comparator `BytewiseComparator` and `ReverseBytewiseComparator`, there is no difference between `Comparator::Name` and `Comparator::GetRootComparator::Name` because these built in comparators' root comparator is themselves. However, for built in comparator `BytewiseComparatorWithU64Ts` and `ReverseBytewiseComparatorWithU64Ts`, there are differences. So this change update the logic to persist the user comparator's name, not its root comparator's name. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12037 Test Plan: The restore flow in stress test, which relies on converting Options object to string and back to Options object is updated to help validate comparator object can be correctly serialized and deserialized with the OPTIONS file mechanism Updated unit test to use a comparator that has a root comparator that is not itself. Reviewed By: cbi42 Differential Revision: D50909750 Pulled By: jowlyzhang fbshipit-source-id: 9086d7135c7a6f4b5565fb47fce194ea0a024f52
2023-11-02 20:27:59 +00:00
// Check OPTIONS string loading can bootstrap the correct user comparator
// from object registry.
assert(options->comparator);
assert(options->comparator == test::BytewiseComparatorWithU64TsWrapper());
}
Deep-copy Options in restored db for stress test to avoid race with SetOptions() (#12015) Summary: **Context** DB open will persist the `Options` in memory to options file and verify the file right after the write. The verification is done by comparing the options from parsing the written options file against the `Options` object in memory. Upon inconsistency, corruption such as https://github.com/facebook/rocksdb/blob/main/options/options_parser.cc#L725 will be returned. This verification assumes the `Options` object in memory is not changed from before the write till the verification. This assumption can break during [opening the restored db in stress test](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1784-L1799). This [line](https://github.com/facebook/rocksdb/blob/0f141352d8de2f743d222a6f2ff493a31dd2838c/db_stress_tool/db_stress_test_base.cc#L1770) makes it shares some pointer options (e.g, `std::shared_ptr<const FilterPolicy> filter_policy`) with other threads (e.g, SetOptions()) in db stress. And since https://github.com/facebook/rocksdb/pull/11838, filter_policy's field `bloom_before_level ` has now been mutable by SetOptions(). Therefore we started to see stress test failure like below: ``` Failure in DB::Open in backup/restore with: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id Verification failed: Backup/restore failed: IO error: DB::Open() failed --- Unable to persist Options file: IO error: Unable to persist options.: Corruption: [RocksDBOptionsParser]:failed the verification on BlockBasedTable::: filter_policy.id db_stress: db_stress_tool/db_stress_test_base.cc:479: void rocksdb::StressTest::ProcessStatus(rocksdb::SharedState*, std::string, rocksdb::Status) const: Assertion `false' failed. ``` **Summary** This PR uses "deep copy" of the `options_` by CreateXXXFromString() to avoid sharing pointer options. **Test plan** Run the below db stress command that failed before this PR and pass after ``` ./db_stress --column_families=1 --threads=2 --preserve_unverified_changes=0 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_data_in_errors=True --async_io=0 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=10 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=1 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=0 --bottommost_compression_type=disable --bottommost_file_compaction_delay=86400 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=tiered_auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=0 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_readahead_size=0 --compaction_ttl=0 --compressed_secondary_cache_ratio=0.3333333333333333 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=lz4 --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=8388608 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=14 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=1000 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=2500 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=4194304 --memtable_max_range_deletions=0 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=0 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=1 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=500000 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --secondary_cache_uri= --set_options_one_in=5 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=600 --subcompactions=3 --sync=0 --sync_fault_injection=0 --target_file_size_base=2097152 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=0 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=0 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=4194304 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=35 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/12015 Reviewed By: pdillinger Differential Revision: D50666136 Pulled By: hx235 fbshipit-source-id: 804acc23aecb4eedfe5c44f732e86291f2420b2b
2023-10-28 00:07:39 +00:00
return Status::OK();
}
Status StressTest::TestApproximateSize(
ThreadState* thread, uint64_t iteration,
const std::vector<int>& rand_column_families,
const std::vector<int64_t>& rand_keys) {
// rand_keys likely only has one key. Just use the first one.
assert(!rand_keys.empty());
assert(!rand_column_families.empty());
int64_t key1 = rand_keys[0];
int64_t key2;
if (thread->rand.OneIn(2)) {
// Two totally random keys. This tends to cover large ranges.
key2 = GenerateOneKey(thread, iteration);
if (key2 < key1) {
std::swap(key1, key2);
}
} else {
// Unless users pass a very large FLAGS_max_key, it we should not worry
// about overflow. It is for testing, so we skip the overflow checking
// for simplicity.
key2 = key1 + static_cast<int64_t>(thread->rand.Uniform(1000));
}
std::string key1_str = Key(key1);
std::string key2_str = Key(key2);
Range range{Slice(key1_str), Slice(key2_str)};
SizeApproximationOptions sao;
sao.include_memtables = thread->rand.OneIn(2);
if (sao.include_memtables) {
sao.include_files = thread->rand.OneIn(2);
}
if (thread->rand.OneIn(2)) {
if (thread->rand.OneIn(2)) {
sao.files_size_error_margin = 0.0;
} else {
sao.files_size_error_margin =
static_cast<double>(thread->rand.Uniform(3));
}
}
uint64_t result;
return db_->GetApproximateSizes(
sao, column_families_[rand_column_families[0]], &range, 1, &result);
}
Status StressTest::TestCheckpoint(ThreadState* thread,
const std::vector<int>& rand_column_families,
const std::vector<int64_t>& rand_keys) {
std::vector<std::unique_ptr<MutexLock>> locks;
if (ShouldAcquireMutexOnKey()) {
for (int rand_column_family : rand_column_families) {
// `rand_keys[0]` on each chosen CF will be verified.
locks.emplace_back(new MutexLock(
thread->shared->GetMutexForKey(rand_column_family, rand_keys[0])));
}
}
std::string checkpoint_dir =
FLAGS_db + "/.checkpoint" + std::to_string(thread->tid);
Options tmp_opts(options_);
tmp_opts.listeners.clear();
tmp_opts.env = db_stress_env;
Fix race condition in db_stress checkpoint cleanup (#11389) Summary: The old cleanup code had a race condition: 1. Test thread: DestroyDB() marked a file as trash 2. DeleteScheduler thread: Got the file's size and decided to delete it in chunks 3. Test thread: DestroyDir() deleted that trash file 4. DeleteScheduler thread: Began deleting in chunks starting by calling ReopenWritableFile(). Unfortunately this recreates the deleted trash file 5. Test thread: DestroyDir() fails to remove the parent directory because it contains the file created in 4. 6. Test thread: Checkpoint::Create() fails due to the directory already existing It could be repro'd with the following patch/command. Patch: ``` diff --git a/file/delete_scheduler.cc b/file/delete_scheduler.cc index 8a2d1615d..337d24a60 100644 --- a/file/delete_scheduler.cc +++ b/file/delete_scheduler.cc @@ -317,6 +317,12 @@ Status DeleteScheduler::DeleteTrashFile(const std::string& path_in_trash, &num_hard_links, nullptr); if (my_status.ok()) { if (num_hard_links == 1) { + // Give some time for DestroyDir() to delete file entries. Then, the + // below `ReopenWritableFile()` will recreate files, preventing the + // parent directory from being deleted. + if (rand() % 2 == 0) { + usleep(1000); + } std::unique_ptr<FSWritableFile> wf; my_status = fs_->ReopenWritableFile(path_in_trash, FileOptions(), &wf, nullptr); diff --git a/file/file_util.cc b/file/file_util.cc index 43608fcdc..2cee1ad8e 100644 --- a/file/file_util.cc +++ b/file/file_util.cc @@ -263,6 +263,13 @@ Status DestroyDir(Env* env, const std::string& dir) { } } + // Give some time for the DeleteScheduler thread's ReopenWritableFile() to + // recreate deleted files + if (dir.find("checkpoint") != std::string::npos) { + fprintf(stderr, "waiting to destroy %s\n", dir.c_str()); + usleep(10000); + } + if (s.ok()) { s = env->DeleteDir(dir); // DeleteDir might or might not report NotFound ``` Command: ``` TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=131072 --target_file_size_base=131072 --max_bytes_for_level_base=524288 --checkpoint_one_in=100 --clear_column_family_one_in=0 --max_key=1000 --value_size_mult=33 --sst_file_manager_bytes_per_truncate=4096 --sst_file_manager_bytes_per_sec=1048576 --interval=3 --compression_type=none --sync_fault_injection=1 ``` Obviously we don't want to use scheduled deletion here as we need the checkpoint directory deleted immediately. I suspect the DestroyDir() was an attempt to fixup incomplete DestroyDB()s. Now that we expect DestroyDB() to be complete I removed that code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11389 Reviewed By: hx235 Differential Revision: D45137142 Pulled By: ajkr fbshipit-source-id: 2af743d342c77cc414fd25fc4c9d7c9c6079ad24
2023-04-20 19:48:53 +00:00
// Avoid delayed deletion so whole directory can be deleted
tmp_opts.sst_file_manager.reset();
DestroyDB(checkpoint_dir, tmp_opts);
Checkpoint* checkpoint = nullptr;
Status s = Checkpoint::Create(db_, &checkpoint);
if (s.ok()) {
s = checkpoint->CreateCheckpoint(checkpoint_dir);
if (!s.ok()) {
if (!s.IsIOError() || !std::strstr(s.getState(), "injected")) {
fprintf(stderr, "Fail to create checkpoint to %s\n",
checkpoint_dir.c_str());
std::vector<std::string> files;
Status my_s = db_stress_env->GetChildren(checkpoint_dir, &files);
if (my_s.ok()) {
for (const auto& f : files) {
fprintf(stderr, " %s\n", f.c_str());
}
} else {
fprintf(stderr, "Fail to get files under the directory to %s\n",
my_s.ToString().c_str());
}
}
}
}
delete checkpoint;
checkpoint = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
DB* checkpoint_db = nullptr;
if (s.ok()) {
Options options(options_);
options.best_efforts_recovery = false;
options.listeners.clear();
// Avoid race condition in trash handling after delete checkpoint_db
options.sst_file_manager.reset();
std::vector<ColumnFamilyDescriptor> cf_descs;
// TODO(ajkr): `column_family_names_` is not safe to access here when
// `clear_column_family_one_in != 0`. But we can't easily switch to
// `ListColumnFamilies` to get names because it won't necessarily give
// the same order as `column_family_names_`.
assert(FLAGS_clear_column_family_one_in == 0);
if (FLAGS_clear_column_family_one_in == 0) {
for (const auto& name : column_family_names_) {
cf_descs.emplace_back(name, ColumnFamilyOptions(options));
}
s = DB::OpenForReadOnly(DBOptions(options), checkpoint_dir, cf_descs,
&cf_handles, &checkpoint_db);
}
}
if (checkpoint_db != nullptr) {
// Note the column families chosen by `rand_column_families` cannot be
// dropped while the locks for `rand_keys` are held. So we should not have
// to worry about accessing those column families throughout this function.
for (size_t i = 0; s.ok() && i < rand_column_families.size(); ++i) {
std::string key_str = Key(rand_keys[0]);
Slice key = key_str;
std::string ts_str;
Slice ts;
ReadOptions read_opts;
if (FLAGS_user_timestamp_size > 0) {
ts_str = GetNowNanos();
ts = ts_str;
read_opts.timestamp = &ts;
}
std::string value;
Status get_status = checkpoint_db->Get(
read_opts, cf_handles[rand_column_families[i]], key, &value);
bool exists =
thread->shared->Exists(rand_column_families[i], rand_keys[0]);
if (get_status.ok()) {
if (!exists && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true) << " exists in checkpoint "
<< checkpoint_dir << " but not in original db";
s = Status::Corruption(oss.str());
}
} else if (get_status.IsNotFound()) {
if (exists && ShouldAcquireMutexOnKey()) {
std::ostringstream oss;
oss << "0x" << key.ToString(true)
<< " exists in original db but not in checkpoint "
<< checkpoint_dir;
s = Status::Corruption(oss.str());
}
} else {
s = get_status;
}
}
for (auto cfh : cf_handles) {
delete cfh;
}
cf_handles.clear();
delete checkpoint_db;
checkpoint_db = nullptr;
}
if (!s.ok()) {
if (!s.IsIOError() || !std::strstr(s.getState(), "injected")) {
fprintf(stderr, "A checkpoint operation failed with: %s\n",
s.ToString().c_str());
}
} else {
DestroyDB(checkpoint_dir, tmp_opts);
}
return s;
}
void StressTest::TestGetProperty(ThreadState* thread) const {
std::unordered_set<std::string> levelPropertyNames = {
DB::Properties::kAggregatedTablePropertiesAtLevel,
DB::Properties::kCompressionRatioAtLevelPrefix,
DB::Properties::kNumFilesAtLevelPrefix,
};
std::unordered_set<std::string> unknownPropertyNames = {
DB::Properties::kEstimateOldestKeyTime,
DB::Properties::kOptionsStatistics,
DB::Properties::
kLiveSstFilesSizeAtTemperature, // similar to levelPropertyNames, it
// requires a number suffix
};
unknownPropertyNames.insert(levelPropertyNames.begin(),
levelPropertyNames.end());
std::unordered_set<std::string> blobCachePropertyNames = {
DB::Properties::kBlobCacheCapacity,
DB::Properties::kBlobCacheUsage,
DB::Properties::kBlobCachePinnedUsage,
};
if (db_->GetOptions().blob_cache == nullptr) {
unknownPropertyNames.insert(blobCachePropertyNames.begin(),
blobCachePropertyNames.end());
}
std::string prop;
for (const auto& ppt_name_and_info : InternalStats::ppt_name_to_info) {
bool res = db_->GetProperty(ppt_name_and_info.first, &prop);
if (unknownPropertyNames.find(ppt_name_and_info.first) ==
unknownPropertyNames.end()) {
if (!res) {
fprintf(stderr, "Failed to get DB property: %s\n",
ppt_name_and_info.first.c_str());
thread->shared->SetVerificationFailure();
}
if (ppt_name_and_info.second.handle_int != nullptr) {
uint64_t prop_int;
if (!db_->GetIntProperty(ppt_name_and_info.first, &prop_int)) {
fprintf(stderr, "Failed to get Int property: %s\n",
ppt_name_and_info.first.c_str());
thread->shared->SetVerificationFailure();
}
}
if (ppt_name_and_info.second.handle_map != nullptr) {
std::map<std::string, std::string> prop_map;
if (!db_->GetMapProperty(ppt_name_and_info.first, &prop_map)) {
fprintf(stderr, "Failed to get Map property: %s\n",
ppt_name_and_info.first.c_str());
thread->shared->SetVerificationFailure();
}
}
}
}
ROCKSDB_NAMESPACE::ColumnFamilyMetaData cf_meta_data;
db_->GetColumnFamilyMetaData(&cf_meta_data);
int level_size = static_cast<int>(cf_meta_data.levels.size());
for (int level = 0; level < level_size; level++) {
for (const auto& ppt_name : levelPropertyNames) {
bool res = db_->GetProperty(ppt_name + std::to_string(level), &prop);
if (!res) {
fprintf(stderr, "Failed to get DB property: %s\n",
(ppt_name + std::to_string(level)).c_str());
thread->shared->SetVerificationFailure();
}
}
}
// Test for an invalid property name
if (thread->rand.OneIn(100)) {
if (db_->GetProperty("rocksdb.invalid_property_name", &prop)) {
fprintf(stderr, "Failed to return false for invalid property name\n");
thread->shared->SetVerificationFailure();
}
}
}
Status StressTest::TestGetPropertiesOfAllTables() const {
TablePropertiesCollection props;
return db_->GetPropertiesOfAllTables(&props);
}
void StressTest::TestCompactFiles(ThreadState* thread,
ColumnFamilyHandle* column_family) {
ROCKSDB_NAMESPACE::ColumnFamilyMetaData cf_meta_data;
db_->GetColumnFamilyMetaData(column_family, &cf_meta_data);
if (cf_meta_data.levels.empty()) {
return;
}
// Randomly compact up to three consecutive files from a level
const int kMaxRetry = 3;
for (int attempt = 0; attempt < kMaxRetry; ++attempt) {
size_t random_level =
thread->rand.Uniform(static_cast<int>(cf_meta_data.levels.size()));
const auto& files = cf_meta_data.levels[random_level].files;
if (files.size() > 0) {
size_t random_file_index =
thread->rand.Uniform(static_cast<int>(files.size()));
if (files[random_file_index].being_compacted) {
// Retry as the selected file is currently being compacted
continue;
}
std::vector<std::string> input_files;
input_files.push_back(files[random_file_index].name);
if (random_file_index > 0 &&
!files[random_file_index - 1].being_compacted) {
input_files.push_back(files[random_file_index - 1].name);
}
if (random_file_index + 1 < files.size() &&
!files[random_file_index + 1].being_compacted) {
input_files.push_back(files[random_file_index + 1].name);
}
size_t output_level =
std::min(random_level + 1, cf_meta_data.levels.size() - 1);
CompactionOptions compact_options;
if (thread->rand.OneIn(2)) {
compact_options.output_file_size_limit = FLAGS_target_file_size_base;
}
std::ostringstream compact_opt_oss;
compact_opt_oss << "output_file_size_limit: "
<< compact_options.output_file_size_limit;
auto s = db_->CompactFiles(compact_options, column_family, input_files,
static_cast<int>(output_level));
if (!s.ok()) {
// TOOD (hx235): allow an exact list of tolerable failures under stress
// test
bool non_ok_status_allowed =
s.IsManualCompactionPaused() ||
(s.getState() && std::strstr(s.getState(), "injected")) ||
s.IsAborted() || s.IsInvalidArgument() || s.IsNotSupported();
fprintf(non_ok_status_allowed ? stdout : stderr,
"Unable to perform CompactFiles(): %s under specified "
"CompactionOptions: %s (Empty string or "
"missing field indicates default option or value is used)\n",
s.ToString().c_str(), compact_opt_oss.str().c_str());
thread->stats.AddNumCompactFilesFailed(1);
if (!non_ok_status_allowed) {
thread->shared->SafeTerminate();
}
} else {
thread->stats.AddNumCompactFilesSucceed(1);
}
break;
}
}
}
Status StressTest::TestFlush(const std::vector<int>& rand_column_families) {
FlushOptions flush_opts;
if (FLAGS_atomic_flush) {
return db_->Flush(flush_opts, column_families_);
}
std::vector<ColumnFamilyHandle*> cfhs;
std::for_each(rand_column_families.begin(), rand_column_families.end(),
[this, &cfhs](int k) { cfhs.push_back(column_families_[k]); });
return db_->Flush(flush_opts, cfhs);
}
Status StressTest::TestPauseBackground(ThreadState* thread) {
Status status = db_->PauseBackgroundWork();
if (!status.ok()) {
return status;
}
// To avoid stalling/deadlocking ourself in this thread, just
// sleep here during pause and let other threads do db operations.
// Sleep up to ~16 seconds (2**24 microseconds), but very skewed
// toward short pause. (1 chance in 25 of pausing >= 1s;
// 1 chance in 625 of pausing full 16s.)
int pwr2_micros =
std::min(thread->rand.Uniform(25), thread->rand.Uniform(25));
clock_->SleepForMicroseconds(1 << pwr2_micros);
return db_->ContinueBackgroundWork();
}
Status StressTest::TestDisableFileDeletions(ThreadState* thread) {
Status status = db_->DisableFileDeletions();
if (!status.ok()) {
return status;
}
// Similar to TestPauseBackground()
int pwr2_micros =
std::min(thread->rand.Uniform(25), thread->rand.Uniform(25));
clock_->SleepForMicroseconds(1 << pwr2_micros);
return db_->EnableFileDeletions();
}
Status StressTest::TestDisableManualCompaction(ThreadState* thread) {
db_->DisableManualCompaction();
// Similar to TestPauseBackground()
int pwr2_micros =
std::min(thread->rand.Uniform(25), thread->rand.Uniform(25));
clock_->SleepForMicroseconds(1 << pwr2_micros);
db_->EnableManualCompaction();
return Status::OK();
}
void StressTest::TestAcquireSnapshot(ThreadState* thread,
int rand_column_family,
const std::string& keystr, uint64_t i) {
Slice key = keystr;
ColumnFamilyHandle* column_family = column_families_[rand_column_family];
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
// This `ReadOptions` is for validation purposes. Ignore
// `FLAGS_rate_limit_user_ops` to avoid slowing any validation.
ReadOptions ropt;
auto db_impl = static_cast_with_check<DBImpl>(db_->GetRootDB());
const bool ww_snapshot = thread->rand.OneIn(10);
const Snapshot* snapshot =
ww_snapshot ? db_impl->GetSnapshotForWriteConflictBoundary()
: db_->GetSnapshot();
ropt.snapshot = snapshot;
// Ideally, we want snapshot taking and timestamp generation to be atomic
// here, so that the snapshot corresponds to the timestamp. However, it is
// not possible with current GetSnapshot() API.
std::string ts_str;
Slice ts;
if (FLAGS_user_timestamp_size > 0) {
ts_str = GetNowNanos();
ts = ts_str;
ropt.timestamp = &ts;
}
std::string value_at;
// When taking a snapshot, we also read a key from that snapshot. We
// will later read the same key before releasing the snapshot and
// verify that the results are the same.
auto status_at = db_->Get(ropt, column_family, key, &value_at);
std::vector<bool>* key_vec = nullptr;
if (FLAGS_compare_full_db_state_snapshot && (thread->tid == 0)) {
key_vec = new std::vector<bool>(FLAGS_max_key);
// When `prefix_extractor` is set, seeking to beginning and scanning
// across prefixes are only supported with `total_order_seek` set.
ropt.total_order_seek = true;
std::unique_ptr<Iterator> iterator(db_->NewIterator(ropt));
for (iterator->SeekToFirst(); iterator->Valid(); iterator->Next()) {
uint64_t key_val;
if (GetIntVal(iterator->key().ToString(), &key_val)) {
(*key_vec)[key_val] = true;
}
}
}
ThreadState::SnapshotState snap_state = {snapshot,
rand_column_family,
column_family->GetName(),
keystr,
status_at,
value_at,
key_vec,
ts_str};
uint64_t hold_for = FLAGS_snapshot_hold_ops;
if (FLAGS_long_running_snapshots) {
// Hold 10% of snapshots for 10x more
if (thread->rand.OneIn(10)) {
assert(hold_for < std::numeric_limits<uint64_t>::max() / 10);
hold_for *= 10;
// Hold 1% of snapshots for 100x more
if (thread->rand.OneIn(10)) {
assert(hold_for < std::numeric_limits<uint64_t>::max() / 10);
hold_for *= 10;
}
}
}
uint64_t release_at = std::min(FLAGS_ops_per_thread - 1, i + hold_for);
thread->snapshot_queue.emplace(release_at, snap_state);
}
Status StressTest::MaybeReleaseSnapshots(ThreadState* thread, uint64_t i) {
while (!thread->snapshot_queue.empty() &&
i >= thread->snapshot_queue.front().first) {
auto snap_state = thread->snapshot_queue.front().second;
assert(snap_state.snapshot);
// Note: this is unsafe as the cf might be dropped concurrently. But
// it is ok since unclean cf drop is cunnrently not supported by write
// prepared transactions.
Status s = AssertSame(db_, column_families_[snap_state.cf_at], snap_state);
db_->ReleaseSnapshot(snap_state.snapshot);
delete snap_state.key_vec;
thread->snapshot_queue.pop();
if (!s.ok()) {
return s;
}
}
return Status::OK();
}
void StressTest::TestCompactRange(ThreadState* thread, int64_t rand_key,
const Slice& start_key,
ColumnFamilyHandle* column_family) {
int64_t end_key_num;
if (std::numeric_limits<int64_t>::max() - rand_key <
FLAGS_compact_range_width) {
end_key_num = std::numeric_limits<int64_t>::max();
} else {
end_key_num = FLAGS_compact_range_width + rand_key;
}
std::string end_key_buf = Key(end_key_num);
Slice end_key(end_key_buf);
CompactRangeOptions cro;
cro.exclusive_manual_compaction = static_cast<bool>(thread->rand.Next() % 2);
if (static_cast<ROCKSDB_NAMESPACE::CompactionStyle>(FLAGS_compaction_style) !=
ROCKSDB_NAMESPACE::CompactionStyle::kCompactionStyleFIFO) {
cro.change_level = static_cast<bool>(thread->rand.Next() % 2);
}
if (thread->rand.OneIn(2)) {
cro.target_level = thread->rand.Next() % options_.num_levels;
}
std::vector<BottommostLevelCompaction> bottom_level_styles = {
BottommostLevelCompaction::kSkip,
BottommostLevelCompaction::kIfHaveCompactionFilter,
BottommostLevelCompaction::kForce,
BottommostLevelCompaction::kForceOptimized};
cro.bottommost_level_compaction =
bottom_level_styles[thread->rand.Next() %
static_cast<uint32_t>(bottom_level_styles.size())];
cro.allow_write_stall = static_cast<bool>(thread->rand.Next() % 2);
cro.max_subcompactions = static_cast<uint32_t>(thread->rand.Next() % 4);
std::vector<BlobGarbageCollectionPolicy> blob_gc_policies = {
BlobGarbageCollectionPolicy::kForce,
BlobGarbageCollectionPolicy::kDisable,
BlobGarbageCollectionPolicy::kUseDefault};
cro.blob_garbage_collection_policy =
blob_gc_policies[thread->rand.Next() %
static_cast<uint32_t>(blob_gc_policies.size())];
cro.blob_garbage_collection_age_cutoff =
static_cast<double>(thread->rand.Next() % 100) / 100.0;
const Snapshot* pre_snapshot = nullptr;
uint32_t pre_hash = 0;
if (thread->rand.OneIn(2)) {
// Do some validation by declaring a snapshot and compare the data before
// and after the compaction
pre_snapshot = db_->GetSnapshot();
pre_hash =
GetRangeHash(thread, pre_snapshot, column_family, start_key, end_key);
}
std::ostringstream compact_range_opt_oss;
compact_range_opt_oss << "exclusive_manual_compaction: "
<< cro.exclusive_manual_compaction
<< ", change_level: " << cro.change_level
<< ", target_level: " << cro.target_level
<< ", bottommost_level_compaction: "
<< static_cast<int>(cro.bottommost_level_compaction)
<< ", allow_write_stall: " << cro.allow_write_stall
<< ", max_subcompactions: " << cro.max_subcompactions
<< ", blob_garbage_collection_policy: "
<< static_cast<int>(cro.blob_garbage_collection_policy)
<< ", blob_garbage_collection_age_cutoff: "
<< cro.blob_garbage_collection_age_cutoff;
Status status = db_->CompactRange(cro, column_family, &start_key, &end_key);
if (!status.ok()) {
// TOOD (hx235): allow an exact list of tolerable failures under stress test
bool non_ok_status_allowed =
status.IsManualCompactionPaused() ||
(status.getState() && std::strstr(status.getState(), "injected")) ||
Disallow refitting more than 1 file from non-L0 to L0 (#12481) Summary: **Context/Summary:** We recently discovered that `CompactRange(change_level=true, target_level=0)` can possibly refit more than 1 files to L0. This refitting can cause read performance regression as we need to go through every file in L0, corruption in some edge case and false positive corruption caught by force consistency check. We decided to explicitly disallow such behavior. A related change to OptionChangeMigration(): - When migrating to FIFO with `compaction_options_fifo.max_table_files_size > 0`, RocksDB will [CompactRange() all the to-be-migrate data into a couple L0 files](https://github.com/facebook/rocksdb/blob/main/utilities/option_change_migration/option_change_migration.cc#L164-L169) to avoid dropping all the data upon migration finishes when the migrated data is larger than max_table_files_size. This is achieved by first compacting all the data into a couple non-L0 files and refitting those files from non-L0 to L0 if needed. In that way, only some data instead of all data will be dropped immediately after migration to FIFO with a max_table_files_size. - Since this type of refitting behavior is disallowed from now on, we won't do this trick anymore and explicitly state such risk in API comment. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12481 Test Plan: - New UT - Modified UT Reviewed By: cbi42 Differential Revision: D55351178 Pulled By: hx235 fbshipit-source-id: 9d8854f2f81d7e8aff859c3a4e53b7d688048e80
2024-03-29 17:52:36 +00:00
status.IsAborted() || status.IsInvalidArgument() ||
status.IsNotSupported();
fprintf(non_ok_status_allowed ? stdout : stderr,
"Unable to perform CompactRange(): %s under specified "
"CompactRangeOptions: %s (Empty string or "
"missing field indicates default option or value is used)\n",
status.ToString().c_str(), compact_range_opt_oss.str().c_str());
if (!non_ok_status_allowed) {
// Fail fast to preserve the DB state.
thread->shared->SetVerificationFailure();
}
}
if (pre_snapshot != nullptr) {
uint32_t post_hash =
GetRangeHash(thread, pre_snapshot, column_family, start_key, end_key);
if (pre_hash != post_hash) {
fprintf(stderr,
"Data hash different before and after compact range "
"start_key %s end_key %s under specified CompactRangeOptions: %s "
"(Empty string or "
"missing field indicates default option or value is used)\n",
start_key.ToString(true).c_str(), end_key.ToString(true).c_str(),
compact_range_opt_oss.str().c_str());
thread->stats.AddErrors(1);
// Fail fast to preserve the DB state.
thread->shared->SetVerificationFailure();
}
db_->ReleaseSnapshot(pre_snapshot);
}
}
uint32_t StressTest::GetRangeHash(ThreadState* thread, const Snapshot* snapshot,
ColumnFamilyHandle* column_family,
const Slice& start_key,
const Slice& end_key) {
Add rate limiter priority to ReadOptions (#9424) Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
2022-02-17 07:17:03 +00:00
// This `ReadOptions` is for validation purposes. Ignore
// `FLAGS_rate_limit_user_ops` to avoid slowing any validation.
ReadOptions ro;
ro.snapshot = snapshot;
ro.total_order_seek = true;
std::string ts_str;
Slice ts;
if (FLAGS_user_timestamp_size > 0) {
ts_str = GetNowNanos();
ts = ts_str;
ro.timestamp = &ts;
}
std::unique_ptr<Iterator> it(db_->NewIterator(ro, column_family));
constexpr char kCrcCalculatorSepearator = ';';
uint32_t crc = 0;
for (it->Seek(start_key);
it->Valid() && options_.comparator->Compare(it->key(), end_key) <= 0;
it->Next()) {
crc = crc32c::Extend(crc, it->key().data(), it->key().size());
crc = crc32c::Extend(crc, &kCrcCalculatorSepearator, sizeof(char));
crc = crc32c::Extend(crc, it->value().data(), it->value().size());
crc = crc32c::Extend(crc, &kCrcCalculatorSepearator, sizeof(char));
for (const auto& column : it->columns()) {
crc = crc32c::Extend(crc, column.name().data(), column.name().size());
crc = crc32c::Extend(crc, &kCrcCalculatorSepearator, sizeof(char));
crc = crc32c::Extend(crc, column.value().data(), column.value().size());
crc = crc32c::Extend(crc, &kCrcCalculatorSepearator, sizeof(char));
}
}
if (!it->status().ok()) {
fprintf(stderr, "Iterator non-OK when calculating range CRC: %s\n",
it->status().ToString().c_str());
thread->stats.AddErrors(1);
// Fail fast to preserve the DB state.
thread->shared->SetVerificationFailure();
}
return crc;
}
void StressTest::PrintEnv() const {
fprintf(stdout, "RocksDB version : %d.%d\n", kMajorVersion,
kMinorVersion);
fprintf(stdout, "Format version : %d\n", FLAGS_format_version);
fprintf(stdout, "TransactionDB : %s\n",
FLAGS_use_txn ? "true" : "false");
Improve stress test for transactions (#9568) Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7
2022-03-17 02:00:04 +00:00
if (FLAGS_use_txn) {
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
fprintf(stdout, "TransactionDB Type : %s\n",
FLAGS_use_optimistic_txn ? "Optimistic" : "Pessimistic");
if (FLAGS_use_optimistic_txn) {
fprintf(stdout, "OCC Validation Type : %d\n",
static_cast<int>(FLAGS_occ_validation_policy));
if (static_cast<uint64_t>(OccValidationPolicy::kValidateParallel) ==
FLAGS_occ_validation_policy) {
fprintf(stdout, "Share Lock Buckets : %s\n",
FLAGS_share_occ_lock_buckets ? "true" : "false");
if (FLAGS_share_occ_lock_buckets) {
fprintf(stdout, "Lock Bucket Count : %d\n",
static_cast<int>(FLAGS_occ_lock_bucket_count));
}
}
} else {
fprintf(stdout, "Two write queues: : %s\n",
FLAGS_two_write_queues ? "true" : "false");
fprintf(stdout, "Write policy : %d\n",
static_cast<int>(FLAGS_txn_write_policy));
if (static_cast<uint64_t>(TxnDBWritePolicy::WRITE_PREPARED) ==
FLAGS_txn_write_policy ||
static_cast<uint64_t>(TxnDBWritePolicy::WRITE_UNPREPARED) ==
FLAGS_txn_write_policy) {
fprintf(stdout, "Snapshot cache bits : %d\n",
static_cast<int>(FLAGS_wp_snapshot_cache_bits));
fprintf(stdout, "Commit cache bits : %d\n",
static_cast<int>(FLAGS_wp_commit_cache_bits));
}
fprintf(stdout, "last cwb for recovery : %s\n",
FLAGS_use_only_the_last_commit_time_batch_for_recovery ? "true"
: "false");
}
Improve stress test for transactions (#9568) Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7
2022-03-17 02:00:04 +00:00
}
fprintf(stdout, "Stacked BlobDB : %s\n",
FLAGS_use_blob_db ? "true" : "false");
fprintf(stdout, "Read only mode : %s\n",
FLAGS_read_only ? "true" : "false");
fprintf(stdout, "Atomic flush : %s\n",
FLAGS_atomic_flush ? "true" : "false");
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
fprintf(stdout, "Manual WAL flush : %s\n",
FLAGS_manual_wal_flush_one_in > 0 ? "true" : "false");
fprintf(stdout, "Column families : %d\n", FLAGS_column_families);
if (!FLAGS_test_batches_snapshots) {
fprintf(stdout, "Clear CFs one in : %d\n",
FLAGS_clear_column_family_one_in);
}
fprintf(stdout, "Number of threads : %d\n", FLAGS_threads);
fprintf(stdout, "Ops per thread : %lu\n",
(unsigned long)FLAGS_ops_per_thread);
std::string ttl_state("unused");
if (FLAGS_ttl > 0) {
ttl_state = std::to_string(FLAGS_ttl);
}
fprintf(stdout, "Time to live(sec) : %s\n", ttl_state.c_str());
fprintf(stdout, "Read percentage : %d%%\n", FLAGS_readpercent);
fprintf(stdout, "Prefix percentage : %d%%\n", FLAGS_prefixpercent);
fprintf(stdout, "Write percentage : %d%%\n", FLAGS_writepercent);
fprintf(stdout, "Delete percentage : %d%%\n", FLAGS_delpercent);
fprintf(stdout, "Delete range percentage : %d%%\n", FLAGS_delrangepercent);
fprintf(stdout, "No overwrite percentage : %d%%\n",
FLAGS_nooverwritepercent);
fprintf(stdout, "Iterate percentage : %d%%\n", FLAGS_iterpercent);
fprintf(stdout, "Custom ops percentage : %d%%\n", FLAGS_customopspercent);
fprintf(stdout, "DB-write-buffer-size : %" PRIu64 "\n",
FLAGS_db_write_buffer_size);
fprintf(stdout, "Write-buffer-size : %d\n", FLAGS_write_buffer_size);
fprintf(stdout, "Iterations : %lu\n",
(unsigned long)FLAGS_num_iterations);
fprintf(stdout, "Max key : %lu\n",
(unsigned long)FLAGS_max_key);
fprintf(stdout, "Ratio #ops/#keys : %f\n",
(1.0 * FLAGS_ops_per_thread * FLAGS_threads) / FLAGS_max_key);
fprintf(stdout, "Num times DB reopens : %d\n", FLAGS_reopen);
fprintf(stdout, "Batches/snapshots : %d\n",
FLAGS_test_batches_snapshots);
fprintf(stdout, "Do update in place : %d\n",
FLAGS_inplace_update_support);
fprintf(stdout, "Num keys per lock : %d\n",
1 << FLAGS_log2_keys_per_lock);
std::string compression = CompressionTypeToString(compression_type_e);
fprintf(stdout, "Compression : %s\n", compression.c_str());
std::string bottommost_compression =
CompressionTypeToString(bottommost_compression_type_e);
fprintf(stdout, "Bottommost Compression : %s\n",
bottommost_compression.c_str());
std::string checksum = ChecksumTypeToString(checksum_type_e);
fprintf(stdout, "Checksum type : %s\n", checksum.c_str());
fprintf(stdout, "File checksum impl : %s\n",
FLAGS_file_checksum_impl.c_str());
fprintf(stdout, "Bloom bits / key : %s\n",
FormatDoubleParam(FLAGS_bloom_bits).c_str());
fprintf(stdout, "Max subcompactions : %" PRIu64 "\n",
FLAGS_subcompactions);
fprintf(stdout, "Use MultiGet : %s\n",
FLAGS_use_multiget ? "true" : "false");
fprintf(stdout, "Use GetEntity : %s\n",
FLAGS_use_get_entity ? "true" : "false");
fprintf(stdout, "Use MultiGetEntity : %s\n",
FLAGS_use_multi_get_entity ? "true" : "false");
fprintf(stdout, "Verification only : %s\n",
FLAGS_verification_only ? "true" : "false");
const char* memtablerep = "";
switch (FLAGS_rep_factory) {
case kSkipList:
memtablerep = "skip_list";
break;
case kHashSkipList:
memtablerep = "prefix_hash";
break;
case kVectorRep:
memtablerep = "vector";
break;
}
fprintf(stdout, "Memtablerep : %s\n", memtablerep);
#ifndef NDEBUG
KillPoint* kp = KillPoint::GetInstance();
fprintf(stdout, "Test kill odd : %d\n", kp->rocksdb_kill_odds);
if (!kp->rocksdb_kill_exclude_prefixes.empty()) {
fprintf(stdout, "Skipping kill points prefixes:\n");
for (auto& p : kp->rocksdb_kill_exclude_prefixes) {
fprintf(stdout, " %s\n", p.c_str());
}
}
#endif
fprintf(stdout, "Periodic Compaction Secs : %" PRIu64 "\n",
FLAGS_periodic_compaction_seconds);
Add offpeak feature to crash test (#12549) Summary: As title. Add offpeak feature in stress test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12549 Test Plan: Ran stress test locally with the flag set ``` Running db_stress with pid=701060: ./db_stress ... --daily_offpeak_time_utc=04:00-08:00 ... --periodic_compaction_seconds=10 ... ... KILLED 701060 stdout: Choosing random keys with no overwrite Creating 6250000 locks 2024/04/16-11:38:19 Initializing db_stress RocksDB version : 9.2 Format version : 5 TransactionDB : false Stacked BlobDB : false Read only mode : false Atomic flush : false Manual WAL flush : true Column families : 1 Clear CFs one in : 0 Number of threads : 32 Ops per thread : 100000000 Time to live(sec) : unused Read percentage : 60% Prefix percentage : 0% Write percentage : 35% Delete percentage : 4% Delete range percentage : 1% No overwrite percentage : 1% Iterate percentage : 0% Custom ops percentage : 0% DB-write-buffer-size : 0 Write-buffer-size : 4194304 Iterations : 10 Max key : 25000000 Ratio #ops/#keys : 128.000000 Num times DB reopens : 0 Batches/snapshots : 0 Do update in place : 0 Num keys per lock : 4 Compression : LZ4 Bottommost Compression : DisableOption Checksum type : kxxHash File checksum impl : none Bloom bits / key : 18.000000 Max subcompactions : 4 Use MultiGet : false Use GetEntity : false Use MultiGetEntity : false Verification only : false Memtablerep : skip_list Test kill odd : 0 Periodic Compaction Secs : 10 Daily Offpeak UTC : 04:00-08:00 <<<<<<<<<<<<<<< Newly added Compaction TTL : 0 Compaction Pri : kMinOverlappingRatio Background Purge : 0 Write DB ID to manifest : 0 Max Write Batch Group Size: 16 Use dynamic level : 1 Read fault one in : 0 Write fault one in : 1000 Open metadata write fault one in: 8 Sync fault injection : 0 Best efforts recovery : 0 Fail if OPTIONS file error: 0 User timestamp size bytes : 0 Persist user defined timestamps : 1 WAL compression : zstd Try verify sst unique id : 1 ------------------------------------------------ ``` Reviewed By: hx235 Differential Revision: D56203102 Pulled By: jaykorean fbshipit-source-id: 11a9be7362b3b26940d74d41c8bf4ebac3f03a2d
2024-04-16 19:44:44 +00:00
fprintf(stdout, "Daily Offpeak UTC : %s\n",
FLAGS_daily_offpeak_time_utc.c_str());
fprintf(stdout, "Compaction TTL : %" PRIu64 "\n",
FLAGS_compaction_ttl);
const char* compaction_pri = "";
switch (FLAGS_compaction_pri) {
case kByCompensatedSize:
compaction_pri = "kByCompensatedSize";
break;
case kOldestLargestSeqFirst:
compaction_pri = "kOldestLargestSeqFirst";
break;
case kOldestSmallestSeqFirst:
compaction_pri = "kOldestSmallestSeqFirst";
break;
case kMinOverlappingRatio:
compaction_pri = "kMinOverlappingRatio";
break;
case kRoundRobin:
compaction_pri = "kRoundRobin";
break;
}
fprintf(stdout, "Compaction Pri : %s\n", compaction_pri);
fprintf(stdout, "Background Purge : %d\n",
static_cast<int>(FLAGS_avoid_unnecessary_blocking_io));
fprintf(stdout, "Write DB ID to manifest : %d\n",
static_cast<int>(FLAGS_write_dbid_to_manifest));
fprintf(stdout, "Max Write Batch Group Size: %" PRIu64 "\n",
FLAGS_max_write_batch_group_size_bytes);
fprintf(stdout, "Use dynamic level : %d\n",
static_cast<int>(FLAGS_level_compaction_dynamic_level_bytes));
fprintf(stdout, "Read fault one in : %d\n", FLAGS_read_fault_one_in);
fprintf(stdout, "Write fault one in : %d\n", FLAGS_write_fault_one_in);
fprintf(stdout, "Open metadata write fault one in:\n");
fprintf(stdout, " %d\n",
FLAGS_open_metadata_write_fault_one_in);
fprintf(stdout, "Sync fault injection : %d\n",
FLAGS_sync_fault_injection);
fprintf(stdout, "Best efforts recovery : %d\n",
static_cast<int>(FLAGS_best_efforts_recovery));
fprintf(stdout, "Fail if OPTIONS file error: %d\n",
static_cast<int>(FLAGS_fail_if_options_file_error));
fprintf(stdout, "User timestamp size bytes : %d\n",
static_cast<int>(FLAGS_user_timestamp_size));
Add initial support to stress test persist_user_defined_timestamps (#12124) Summary: This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs. This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably: 1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up. 2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that. 3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124 Test Plan: running multiple flavor of this test on continuous run for sometime before checkin Reviewed By: ltamasi Differential Revision: D51916267 Pulled By: jowlyzhang fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
2023-12-12 17:35:29 +00:00
fprintf(stdout, "Persist user defined timestamps : %d\n",
FLAGS_persist_user_defined_timestamps);
fprintf(stdout, "WAL compression : %s\n",
FLAGS_wal_compression.c_str());
fprintf(stdout, "Try verify sst unique id : %d\n",
static_cast<int>(FLAGS_verify_sst_unique_id_in_manifest));
fprintf(stdout, "------------------------------------------------\n");
}
Do not drop unsynced data during reopen in stress test (#11731) Summary: Currently the stress test does not support restoring expected state (to a specific sequence number) when there is unsynced data loss during the reopen phase. This causes a few internal stress test failure with errors like inconsistent value. This PR disables dropping unsynced data during reopen to avoid failures due to this issue. We can re-enable later after we decide to support unsynced data loss during DB reopen in stress test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11731 Test Plan: * Running this test a few times can fail for inconsistent value before this change ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=20.57166126835524 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=3 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=6 --index_type=3 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --log2_keys_per_lock=10 --long_running_snapshots=1 --manual_wal_flush_one_in=1000000 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_max_range_deletions=100 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=5 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=10 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=50 --recycle_log_file_num=0 --reopen=20 --ribbon_starting_level=0 --secondary_cache_fault_one_in=32 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --subcompactions=3 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=1 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=35``` Reviewed By: hx235 Differential Revision: D48537494 Pulled By: cbi42 fbshipit-source-id: ddae21b9bb6ee8d67229121f58513e95f7ef6d8d
2023-08-22 16:47:04 +00:00
void StressTest::Open(SharedState* shared, bool reopen) {
assert(db_ == nullptr);
assert(txn_db_ == nullptr);
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
assert(optimistic_txn_db_ == nullptr);
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
if (!InitializeOptionsFromFile(options_)) {
InitializeOptionsFromFlags(cache_, filter_policy_, options_);
}
InitializeOptionsGeneral(cache_, filter_policy_, options_);
if (FLAGS_prefix_size == 0 && FLAGS_rep_factory == kHashSkipList) {
fprintf(stderr,
"prefeix_size cannot be zero if memtablerep == prefix_hash\n");
exit(1);
}
if (FLAGS_prefix_size != 0 && FLAGS_rep_factory != kHashSkipList) {
StressTest - Move some stderr messages to stdout (#12304) Summary: Moving some of the messages that we print out in `stderr` to `stdout` to make `stderr` more strictly related to errors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12304 Test Plan: ``` $> python3 tools/db_crashtest.py blackbox --simple --max_key=25000000 --write_buffer_size=4194304 ``` **Before** ``` ... stderr: WARNING: prefix_size is non-zero but memtablerep != prefix_hash Error : jewoongh injected test error This is not a real failure. Verification failed :( ``` **After** No longer seeing the `WARNING: prefix_size is non-zero but memtablerep != prefix_hash` message in stderr, but still appears in stdout. ``` WARNING: prefix_size is non-zero but memtablerep != prefix_hash Integrated BlobDB: blob files enabled 0, min blob size 0, blob file size 268435456, blob compression type NoCompression, blob GC enabled 0, cutoff 0.250000, force threshold 1.000000, blob compaction readahead size 0, blob file starting level 0 Integrated BlobDB: blob cache disabled DB path: [/tmp/jewoongh/rocksdb_crashtest_blackboxzztp281q] (Re-)verified 0 unique IDs 2024/01/29-11:57:51 Initializing worker threads Crash-recovery verification passed :) 2024/01/29-11:57:58 Starting database operations 2024/01/29-11:57:58 Starting verification Stress Test : 245.167 micros/op 10221 ops/sec : Wrote 0.00 MB (0.10 MB/sec) (16% of 6 ops) : Wrote 1 times : Deleted 0 times : Single deleted 0 times : 4 read and 0 found the key : Prefix scanned 0 times : Iterator size sum is 0 : Iterated 3 times : Deleted 0 key-ranges : Range deletions covered 0 keys : Got errors 0 times : 0 CompactFiles() succeed : 0 CompactFiles() did not succeed stderr: Error : jewoongh injected test error This is not a real failure. Error : jewoongh injected test error This is not a real failure. Error : jewoongh injected test error This is not a real failure. Verification failed :( ``` Reviewed By: akankshamahajan15 Differential Revision: D53193587 Pulled By: jaykorean fbshipit-source-id: 40d59f4c993c5ce043c571a207ccc9b74a0180c6
2024-01-29 20:52:59 +00:00
fprintf(stdout,
"WARNING: prefix_size is non-zero but "
"memtablerep != prefix_hash\n");
}
if ((options_.enable_blob_files || options_.enable_blob_garbage_collection ||
FLAGS_allow_setting_blob_options_dynamically) &&
FLAGS_best_efforts_recovery) {
fprintf(stderr,
"Integrated BlobDB is currently incompatible with best-effort "
"recovery\n");
exit(1);
}
fprintf(stdout,
"Integrated BlobDB: blob files enabled %d, min blob size %" PRIu64
", blob file size %" PRIu64
", blob compression type %s, blob GC enabled %d, cutoff %f, force "
Make it possible to enable blob files starting from a certain LSM tree level (#10077) Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-03 03:04:33 +00:00
"threshold %f, blob compaction readahead size %" PRIu64
", blob file starting level %d\n",
options_.enable_blob_files, options_.min_blob_size,
options_.blob_file_size,
CompressionTypeToString(options_.blob_compression_type).c_str(),
options_.enable_blob_garbage_collection,
options_.blob_garbage_collection_age_cutoff,
options_.blob_garbage_collection_force_threshold,
Make it possible to enable blob files starting from a certain LSM tree level (#10077) Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-03 03:04:33 +00:00
options_.blob_compaction_readahead_size,
options_.blob_file_starting_level);
if (FLAGS_use_blob_cache) {
fprintf(stdout,
"Integrated BlobDB: blob cache enabled"
", block and blob caches shared: %d",
FLAGS_use_shared_block_and_blob_cache);
if (!FLAGS_use_shared_block_and_blob_cache) {
fprintf(stdout,
", blob cache size %" PRIu64 ", blob cache num shard bits: %d",
FLAGS_blob_cache_size, FLAGS_blob_cache_numshardbits);
}
fprintf(stdout, ", blob cache prepopulated: %d\n",
FLAGS_prepopulate_blob_cache);
} else {
fprintf(stdout, "Integrated BlobDB: blob cache disabled\n");
}
fprintf(stdout, "DB path: [%s]\n", FLAGS_db.c_str());
Status s;
if (FLAGS_ttl == -1) {
std::vector<std::string> existing_column_families;
s = DB::ListColumnFamilies(DBOptions(options_), FLAGS_db,
&existing_column_families); // ignore errors
if (!s.ok()) {
// DB doesn't exist
assert(existing_column_families.empty());
assert(column_family_names_.empty());
column_family_names_.push_back(kDefaultColumnFamilyName);
} else if (column_family_names_.empty()) {
// this is the first call to the function Open()
column_family_names_ = existing_column_families;
} else {
// this is a reopen. just assert that existing column_family_names are
// equivalent to what we remember
auto sorted_cfn = column_family_names_;
std::sort(sorted_cfn.begin(), sorted_cfn.end());
std::sort(existing_column_families.begin(),
existing_column_families.end());
if (sorted_cfn != existing_column_families) {
fprintf(stderr, "Expected column families differ from the existing:\n");
fprintf(stderr, "Expected: {");
for (const auto& cf : sorted_cfn) {
fprintf(stderr, "%s ", cf.c_str());
}
fprintf(stderr, "}\n");
fprintf(stderr, "Existing: {");
for (const auto& cf : existing_column_families) {
fprintf(stderr, "%s ", cf.c_str());
}
fprintf(stderr, "}\n");
}
assert(sorted_cfn == existing_column_families);
}
std::vector<ColumnFamilyDescriptor> cf_descriptors;
for (const auto& name : column_family_names_) {
if (name != kDefaultColumnFamilyName) {
new_column_family_name_ =
std::max(new_column_family_name_.load(), std::stoi(name) + 1);
}
cf_descriptors.emplace_back(name, ColumnFamilyOptions(options_));
}
while (cf_descriptors.size() < (size_t)FLAGS_column_families) {
std::string name = std::to_string(new_column_family_name_.load());
new_column_family_name_++;
cf_descriptors.emplace_back(name, ColumnFamilyOptions(options_));
column_family_names_.push_back(name);
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options_.listeners.clear();
options_.listeners.emplace_back(new DbStressListener(
FLAGS_db, options_.db_paths, cf_descriptors, db_stress_listener_env));
RegisterAdditionalListeners();
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
// If this is for DB reopen, write error injection may have been enabled.
// Disable it here in case there is no open fault injection.
Fix stress test failure due to write fault injections and disable write fault injection (#11859) Summary: This PR contains two fixes: 1. disable write fault injection since it caused several other kinds of internal stress test failures. I'll try to fix those separately before enabling it again. 2. Fix segfault like ``` https://github.com/facebook/rocksdb/issues/5 0x000000000083dc43 in rocksdb::port::Mutex::Lock (this=0x30) at internal_repo_rocksdb/repo/port/port_posix.cc:80 80 internal_repo_rocksdb/repo/port/port_posix.cc: No such file or directory. https://github.com/facebook/rocksdb/issues/6 0x0000000000465142 in rocksdb::MutexLock::MutexLock (mu=0x30, this=<optimized out>) at internal_repo_rocksdb/repo/util/mutexlock.h:37 37 internal_repo_rocksdb/repo/util/mutexlock.h: No such file or directory. https://github.com/facebook/rocksdb/issues/7 rocksdb::FaultInjectionTestFS::DisableWriteErrorInjection (this=0x0) at internal_repo_rocksdb/repo/utilities/fault_injection_fs.h:505 505 internal_repo_rocksdb/repo/utilities/fault_injection_fs.h: No such file or directory. ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/11859 Test Plan: db_stress with no fault injection: `./db_stress --write_fault_one_in=0 --read_fault_one_in=0 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --sync_fault_injection=0` Reviewed By: jaykorean Differential Revision: D49408247 Pulled By: cbi42 fbshipit-source-id: 0ca01f20e6e81bf52af77818b50d562ef7462165
2023-09-19 15:33:05 +00:00
if (fault_fs_guard) {
fault_fs_guard->DisableWriteErrorInjection();
}
if (!FLAGS_use_txn) {
// Determine whether we need to inject file metadata write failures
// during DB reopen. If it does, enable it.
// Only inject metadata error if it is reopening, as initial open
// failure doesn't need to be handled.
// TODO cover transaction DB is not covered in this fault test too.
bool inject_meta_error = false;
bool inject_write_error = false;
bool inject_read_error = false;
if ((FLAGS_open_metadata_write_fault_one_in ||
FLAGS_open_write_fault_one_in || FLAGS_open_read_fault_one_in) &&
fault_fs_guard
->FileExists(FLAGS_db + "/CURRENT", IOOptions(), nullptr)
.ok()) {
if (!FLAGS_sync) {
// When DB Stress is not sync mode, we expect all WAL writes to
// WAL is durable. Buffering unsynced writes will cause false
// positive in crash tests. Before we figure out a way to
// solve it, skip WAL from failure injection.
fault_fs_guard->SetDirectWritableTypes({kWalFile});
}
inject_meta_error = FLAGS_open_metadata_write_fault_one_in;
inject_write_error = FLAGS_open_write_fault_one_in;
inject_read_error = FLAGS_open_read_fault_one_in;
if (inject_meta_error) {
fault_fs_guard->EnableMetadataWriteErrorInjection();
fault_fs_guard->SetRandomMetadataWriteError(
FLAGS_open_metadata_write_fault_one_in);
}
if (inject_write_error) {
fault_fs_guard->SetFilesystemDirectWritable(false);
fault_fs_guard->EnableWriteErrorInjection();
fault_fs_guard->SetRandomWriteError(
static_cast<uint32_t>(FLAGS_seed), FLAGS_open_write_fault_one_in,
IOStatus::IOError("Injected Open Write Error"),
/*inject_for_all_file_types=*/true, /*types=*/{});
}
if (inject_read_error) {
fault_fs_guard->SetRandomReadError(FLAGS_open_read_fault_one_in);
}
}
while (true) {
// StackableDB-based BlobDB
if (FLAGS_use_blob_db) {
blob_db::BlobDBOptions blob_db_options;
blob_db_options.min_blob_size = FLAGS_blob_db_min_blob_size;
blob_db_options.bytes_per_sync = FLAGS_blob_db_bytes_per_sync;
blob_db_options.blob_file_size = FLAGS_blob_db_file_size;
blob_db_options.enable_garbage_collection = FLAGS_blob_db_enable_gc;
blob_db_options.garbage_collection_cutoff = FLAGS_blob_db_gc_cutoff;
blob_db::BlobDB* blob_db = nullptr;
s = blob_db::BlobDB::Open(options_, blob_db_options, FLAGS_db,
cf_descriptors, &column_families_,
&blob_db);
if (s.ok()) {
db_ = blob_db;
}
} else {
if (db_preload_finished_.load() && FLAGS_read_only) {
s = DB::OpenForReadOnly(DBOptions(options_), FLAGS_db,
cf_descriptors, &column_families_, &db_);
} else {
s = DB::Open(DBOptions(options_), FLAGS_db, cf_descriptors,
&column_families_, &db_);
}
}
if (inject_meta_error || inject_write_error || inject_read_error) {
// TODO: re-enable write error injection after reopen. Same for
// sync fault injection.
fault_fs_guard->SetFilesystemDirectWritable(true);
fault_fs_guard->DisableMetadataWriteErrorInjection();
fault_fs_guard->DisableWriteErrorInjection();
fault_fs_guard->SetDirectWritableTypes({});
fault_fs_guard->SetRandomReadError(0);
if (s.ok()) {
// Injected errors might happen in background compactions. We
// wait for all compactions to finish to make sure DB is in
// clean state before executing queries.
Add WaitForCompact with WaitForCompactOptions to public API (#11436) Summary: Context: This is the first PR for WaitForCompact() Implementation with WaitForCompactOptions. In this PR, we are introducing `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` in the public API. This currently utilizes the existing internal `WaitForCompact()` implementation (with default abort_on_pause = false). `abort_on_pause` has been moved to `WaitForCompactOptions&`. In the later PRs, we will introduce the following two options in `WaitForCompactOptions` 1. `bool flush = false` by default - If true, flush before waiting for compactions to finish. Must be set to true to ensure no immediate compactions (except perhaps periodic compactions) after closing and re-opening the DB. 2. `bool close_db = false` by default - If true, will also close the DB upon compactions finishing. 1. struct `WaitForCompactOptions` added to options.h and `abort_on_pause` in the internal API moved to the option struct. 2. `Status WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` introduced in `db.h` 3. Changed the internal WaitForCompact() to `WaitForCompact(const WaitForCompactOptions& wait_for_compact_options)` and checks for the `abort_on_pause` inside the option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11436 Test Plan: Following tests added - `DBCompactionTest::WaitForCompactWaitsOnCompactionToFinish` - `DBCompactionTest::WaitForCompactAbortOnPauseAborted` - `DBCompactionTest::WaitForCompactContinueAfterPauseNotAborted` - `DBCompactionTest::WaitForCompactShutdownWhileWaiting` - `TransactionTest::WaitForCompactAbortOnPause` NOTE: `TransactionTest::WaitForCompactAbortOnPause` was added to use `StackableDB` to ensure the wrapper function is in place. Reviewed By: pdillinger Differential Revision: D45799659 Pulled By: jaykorean fbshipit-source-id: b5b58f95957f2ab47d1221dee32a61d6cdc4685b
2023-05-26 00:25:51 +00:00
s = db_->GetRootDB()->WaitForCompact(WaitForCompactOptions());
if (!s.ok()) {
for (auto cf : column_families_) {
delete cf;
}
column_families_.clear();
delete db_;
db_ = nullptr;
}
}
if (!s.ok()) {
// After failure to opening a DB due to IO error, retry should
// successfully open the DB with correct data if no IO error shows
// up.
inject_meta_error = false;
inject_write_error = false;
inject_read_error = false;
Do not drop unsynced data during reopen in stress test (#11731) Summary: Currently the stress test does not support restoring expected state (to a specific sequence number) when there is unsynced data loss during the reopen phase. This causes a few internal stress test failure with errors like inconsistent value. This PR disables dropping unsynced data during reopen to avoid failures due to this issue. We can re-enable later after we decide to support unsynced data loss during DB reopen in stress test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11731 Test Plan: * Running this test a few times can fail for inconsistent value before this change ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=20.57166126835524 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=3 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=6 --index_type=3 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --log2_keys_per_lock=10 --long_running_snapshots=1 --manual_wal_flush_one_in=1000000 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_max_range_deletions=100 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=5 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=10 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=50 --recycle_log_file_num=0 --reopen=20 --ribbon_starting_level=0 --secondary_cache_fault_one_in=32 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --subcompactions=3 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=1 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=35``` Reviewed By: hx235 Differential Revision: D48537494 Pulled By: cbi42 fbshipit-source-id: ddae21b9bb6ee8d67229121f58513e95f7ef6d8d
2023-08-22 16:47:04 +00:00
// TODO: Unsynced data loss during DB reopen is not supported yet in
// stress test. Will need to recreate expected state if we decide
// to support unsynced data loss during DB reopen.
if (!reopen) {
Random rand(static_cast<uint32_t>(FLAGS_seed));
if (rand.OneIn(2)) {
fault_fs_guard->DeleteFilesCreatedAfterLastDirSync(IOOptions(),
nullptr);
}
if (rand.OneIn(3)) {
fault_fs_guard->DropUnsyncedFileData();
} else if (rand.OneIn(2)) {
fault_fs_guard->DropRandomUnsyncedFileData(&rand);
}
}
continue;
}
}
break;
}
} else {
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
if (FLAGS_use_optimistic_txn) {
OptimisticTransactionDBOptions optimistic_txn_db_options;
optimistic_txn_db_options.validate_policy =
static_cast<OccValidationPolicy>(FLAGS_occ_validation_policy);
if (FLAGS_share_occ_lock_buckets) {
optimistic_txn_db_options.shared_lock_buckets =
MakeSharedOccLockBuckets(FLAGS_occ_lock_bucket_count);
} else {
optimistic_txn_db_options.occ_lock_buckets =
FLAGS_occ_lock_bucket_count;
optimistic_txn_db_options.shared_lock_buckets = nullptr;
}
s = OptimisticTransactionDB::Open(
options_, optimistic_txn_db_options, FLAGS_db, cf_descriptors,
&column_families_, &optimistic_txn_db_);
if (!s.ok()) {
fprintf(stderr, "Error in opening the OptimisticTransactionDB [%s]\n",
s.ToString().c_str());
fflush(stderr);
}
assert(s.ok());
{
db_ = optimistic_txn_db_;
db_aptr_.store(optimistic_txn_db_, std::memory_order_release);
}
Improve stress test for transactions (#9568) Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7
2022-03-17 02:00:04 +00:00
} else {
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
TransactionDBOptions txn_db_options;
assert(FLAGS_txn_write_policy <= TxnDBWritePolicy::WRITE_UNPREPARED);
txn_db_options.write_policy =
static_cast<TxnDBWritePolicy>(FLAGS_txn_write_policy);
if (FLAGS_unordered_write) {
assert(txn_db_options.write_policy ==
TxnDBWritePolicy::WRITE_PREPARED);
options_.unordered_write = true;
options_.two_write_queues = true;
txn_db_options.skip_concurrency_control = true;
} else {
options_.two_write_queues = FLAGS_two_write_queues;
}
txn_db_options.wp_snapshot_cache_bits =
static_cast<size_t>(FLAGS_wp_snapshot_cache_bits);
txn_db_options.wp_commit_cache_bits =
static_cast<size_t>(FLAGS_wp_commit_cache_bits);
PrepareTxnDbOptions(shared, txn_db_options);
s = TransactionDB::Open(options_, txn_db_options, FLAGS_db,
cf_descriptors, &column_families_, &txn_db_);
if (!s.ok()) {
fprintf(stderr, "Error in opening the TransactionDB [%s]\n",
s.ToString().c_str());
fflush(stderr);
}
assert(s.ok());
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
// Do not swap the order of the following.
{
db_ = txn_db_;
db_aptr_.store(txn_db_, std::memory_order_release);
}
}
}
if (!s.ok()) {
fprintf(stderr, "Error in opening the DB [%s]\n", s.ToString().c_str());
fflush(stderr);
}
assert(s.ok());
assert(column_families_.size() ==
static_cast<size_t>(FLAGS_column_families));
Improve stress test for transactions (#9568) Summary: Test only, no change to functionality. Extremely low risk of library regression. Update test key generation by maintaining existing and non-existing keys. Update db_crashtest.py to drive multiops_txn stress test for both write-committed and write-prepared. Add a make target 'blackbox_crash_test_with_multiops_txn'. Running the following commands caught the bug exposed in https://github.com/facebook/rocksdb/issues/9571. ``` $rm -rf /tmp/rocksdbtest/* $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 \ -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 \ -readpercent=20 -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 \ -ub_c=100 -destroy_db_initially=0 -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 $./db_stress -progress_reports=0 -test_multi_ops_txns -use_txn -clear_column_family_one_in=0 -column_families=1 -writepercent=0 -delpercent=0 -delrangepercent=0 -customopspercent=60 -readpercent=20 \ -prefixpercent=0 -iterpercent=20 -reopen=0 -ops_per_thread=1000 -ub_a=10000 -ub_c=100 -destroy_db_initially=0 \ -key_spaces_path=/dev/shm/key_spaces_desc -threads=32 -read_fault_one_in=0 ``` Running the following command caught a bug which will be fixed in https://github.com/facebook/rocksdb/issues/9648 . ``` $TEST_TMPDIR=/dev/shm make blackbox_crash_test_with_multiops_wc_txn ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9568 Reviewed By: jay-zhuang Differential Revision: D34308154 Pulled By: riversand963 fbshipit-source-id: 99ff1b65c19b46c471d2f2d3b47adcd342a1b9e7
2022-03-17 02:00:04 +00:00
// Secondary instance does not support write-prepared/write-unprepared
// transactions, thus just disable secondary instance if we use
// transaction.
if (s.ok() && FLAGS_test_secondary && !FLAGS_use_txn) {
Options tmp_opts;
// TODO(yanqin) support max_open_files != -1 for secondary instance.
tmp_opts.max_open_files = -1;
tmp_opts.env = db_stress_env;
const std::string& secondary_path = FLAGS_secondaries_base;
s = DB::OpenAsSecondary(tmp_opts, FLAGS_db, secondary_path,
cf_descriptors, &cmp_cfhs_, &cmp_db_);
assert(s.ok());
assert(cmp_cfhs_.size() == static_cast<size_t>(FLAGS_column_families));
}
} else {
DBWithTTL* db_with_ttl;
s = DBWithTTL::Open(options_, FLAGS_db, &db_with_ttl, FLAGS_ttl);
db_ = db_with_ttl;
}
db_stress option to preserve all files until verification success (#10659) Summary: In `db_stress`, DB and expected state files containing changes leading up to a verification failure are often deleted, which makes debugging such failures difficult. On the DB side, flushed WAL files and compacted SST files are marked obsolete and then deleted. Without those files, we cannot pinpoint where a key that failed verification changed unexpectedly. On the expected state side, files for verifying prefix-recoverability in the presence of unsynced data loss are deleted before verification. These include a baseline state file containing the expected state at the time of the last successful verification, and a trace file containing all operations since then. Without those files, we cannot know the sequence of DB operations expected to be recovered. This PR attempts to address this gap with a new `db_stress` flag: `preserve_unverified_changes`. Setting `preserve_unverified_changes=1` has two effects. First, prior to startup verification, `db_stress` hardlinks all DB and expected state files in "unverified/" subdirectories of `FLAGS_db` and `FLAGS_expected_values_dir`. The separate directories are needed because the pre-verification opening process deletes files written by the previous `db_stress` run as described above. These "unverified/" subdirectories are cleaned up following startup verification success. I considered other approaches for preserving DB files through startup verification, like using a read-only DB or preventing deletion of DB files externally, e.g., in the `Env` layer. However, I decided against it since such an approach would not work for expected state files, and I did not want to change the DB management logic. If there were a way to disable DB file deletions before regular DB open, I would have preferred to use that. Second, `db_stress` attempts to keep all DB and expected state files that were live at some point since the start of the `db_stress` run. This is a bit tricky and involves the following changes. - Open the DB with `disable_auto_compactions=1` and `avoid_flush_during_recovery=1` - DisableFileDeletions() - EnableAutoCompactions() For this part, too, I would have preferred to use a hypothetical API that disables DB file deletion before regular DB open. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10659 Reviewed By: hx235 Differential Revision: D39407454 Pulled By: ajkr fbshipit-source-id: 6e981025c7dce147649d2e770728471395a7fa53
2022-09-12 21:49:38 +00:00
if (FLAGS_preserve_unverified_changes) {
// Up until now, no live file should have become obsolete due to these
// options. After `DisableFileDeletions()` we can reenable auto compactions
// since, even if live files become obsolete, they won't be deleted.
assert(options_.avoid_flush_during_recovery);
assert(options_.disable_auto_compactions);
if (s.ok()) {
s = db_->DisableFileDeletions();
}
if (s.ok()) {
s = db_->EnableAutoCompaction(column_families_);
}
}
if (!s.ok()) {
fprintf(stderr, "open error: %s\n", s.ToString().c_str());
exit(1);
}
}
void StressTest::Reopen(ThreadState* thread) {
// BG jobs in WritePrepared must be canceled first because i) they can access
// the db via a callbac ii) they hold on to a snapshot and the upcoming
// ::Close would complain about it.
const bool write_prepared = FLAGS_use_txn && FLAGS_txn_write_policy != 0;
bool bg_canceled __attribute__((unused)) = false;
if (write_prepared || thread->rand.OneIn(2)) {
const bool wait =
write_prepared || static_cast<bool>(thread->rand.OneIn(2));
CancelAllBackgroundWork(db_, wait);
bg_canceled = wait;
}
assert(!write_prepared || bg_canceled);
for (auto cf : column_families_) {
delete cf;
}
column_families_.clear();
if (thread->rand.OneIn(2)) {
Status s = db_->Close();
if (!s.ok()) {
fprintf(stderr, "Non-ok close status: %s\n", s.ToString().c_str());
fflush(stderr);
}
assert(s.ok());
}
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
assert((txn_db_ == nullptr && optimistic_txn_db_ == nullptr) ||
(db_ == txn_db_ || db_ == optimistic_txn_db_));
delete db_;
db_ = nullptr;
txn_db_ = nullptr;
Stress/Crash Test for OptimisticTransactionDB (#11513) Summary: Context: OptimisticTransactionDB has not been covered by db_stress (including crash test) like TransactionDB. 1. Adding the following gflag options to to test OptimisticTransactionDB - `use_optimistic_txn`: When true, open OptimisticTransactionDB to test - `occ_validation_policy`: `OccValidationPolicy::kValidateParallel = 1` by default. - `share_occ_lock_buckets`: Use shared occ locks - `occ_lock_bucket_count`: 500 by default. Number of buckets to use for shared occ lock. 2. Opening OptimisticTransactionDB and NewTxn/Commit added per `use_optimistic_txn` flag in `db_stress_test_base.cc` 3. OptimisticTransactionDB blackbox/whitebox test added in crash_test.mk Please note that the existing flag `use_txn` is being used here. When `use_txn == true` and `use_optimistic_txn == false`, we use `TransactionDB` (a.k.a. pessimistic transaction db). When both `use_txn` and `use_optimistic_txn` are true, we use `OptimisticTransactionDB`. If `use_txn == false` but `use_optimistic_txn == true` throw error with message _"You cannot set use_optimistic_txn true while use_txn is false. Please set use_txn true if you want to use OptimisticTransactionDB"_. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11513 Test Plan: **Crash Test** Serial Validation ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=0" make crash_test -j ``` Parallel Validation (no share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=0" make crash_test -j ``` Parallel Validation (share bucket) ``` export CRASH_TEST_EXT_ARGS="--use_optimistic_txn=1 --use_txn=1 --use_put_entity_one_in=0 --occ_validation_policy=1 --share_occ_lock_buckets=1 --occ_lock_bucket_count=500" make crash_test -j ``` **Stress Test** ``` ./db_stress -use_optimistic_txn -threads=32 ``` Reviewed By: pdillinger Differential Revision: D46547387 Pulled By: jaykorean fbshipit-source-id: ca19819ca6e0281694966998014b40d95d4e5960
2023-06-17 23:27:37 +00:00
optimistic_txn_db_ = nullptr;
num_times_reopened_++;
auto now = clock_->NowMicros();
fprintf(stdout, "%s Reopening database for the %dth time\n",
clock_->TimeToString(now / 1000000).c_str(), num_times_reopened_);
Do not drop unsynced data during reopen in stress test (#11731) Summary: Currently the stress test does not support restoring expected state (to a specific sequence number) when there is unsynced data loss during the reopen phase. This causes a few internal stress test failure with errors like inconsistent value. This PR disables dropping unsynced data during reopen to avoid failures due to this issue. We can re-enable later after we decide to support unsynced data loss during DB reopen in stress test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11731 Test Plan: * Running this test a few times can fail for inconsistent value before this change ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=20.57166126835524 --bottommost_compression_type=disable --bytes_per_sync=262144 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=auto_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=0 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=0 --compression_max_dict_bytes=0 --compression_parallel_threads=1 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=1 --file_checksum_impl=big --flush_one_in=1000000 --format_version=3 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=6 --index_type=3 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --log2_keys_per_lock=10 --long_running_snapshots=1 --manual_wal_flush_one_in=1000000 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=0 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=16777216 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_max_range_deletions=100 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=1 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=5 --open_write_fault_one_in=0 --ops_per_thread=200000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=10 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=524288 --readpercent=50 --recycle_log_file_num=0 --reopen=20 --ribbon_starting_level=0 --secondary_cache_fault_one_in=32 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=10 --subcompactions=3 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=2 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=1 --use_merge=0 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=1 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=35``` Reviewed By: hx235 Differential Revision: D48537494 Pulled By: cbi42 fbshipit-source-id: ddae21b9bb6ee8d67229121f58513e95f7ef6d8d
2023-08-22 16:47:04 +00:00
Open(thread->shared, /*reopen=*/true);
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
if ((FLAGS_sync_fault_injection || FLAGS_disable_wal ||
FLAGS_manual_wal_flush_one_in > 0) &&
IsStateTracked()) {
Status s = thread->shared->SaveAtAndAfter(db_);
if (!s.ok()) {
fprintf(stderr, "Error enabling history tracing: %s\n",
s.ToString().c_str());
exit(1);
}
}
}
User-defined timestamp support for `DeleteRange()` (#10661) Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
2022-09-30 23:13:03 +00:00
bool StressTest::MaybeUseOlderTimestampForPointLookup(ThreadState* thread,
std::string& ts_str,
Slice& ts_slice,
ReadOptions& read_opts) {
if (FLAGS_user_timestamp_size == 0) {
User-defined timestamp support for `DeleteRange()` (#10661) Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
2022-09-30 23:13:03 +00:00
return false;
}
Add initial support to stress test persist_user_defined_timestamps (#12124) Summary: This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs. This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably: 1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up. 2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that. 3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124 Test Plan: running multiple flavor of this test on continuous run for sometime before checkin Reviewed By: ltamasi Differential Revision: D51916267 Pulled By: jowlyzhang fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
2023-12-12 17:35:29 +00:00
if (!FLAGS_persist_user_defined_timestamps) {
// Not read with older timestamps to avoid get InvalidArgument.
return false;
}
assert(thread);
if (!thread->rand.OneInOpt(3)) {
User-defined timestamp support for `DeleteRange()` (#10661) Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
2022-09-30 23:13:03 +00:00
return false;
}
const SharedState* const shared = thread->shared;
assert(shared);
const uint64_t start_ts = shared->GetStartTimestamp();
uint64_t now = db_stress_env->NowNanos();
assert(now > start_ts);
uint64_t time_diff = now - start_ts;
uint64_t ts = start_ts + (thread->rand.Next64() % time_diff);
ts_str.clear();
PutFixed64(&ts_str, ts);
ts_slice = ts_str;
read_opts.timestamp = &ts_slice;
User-defined timestamp support for `DeleteRange()` (#10661) Summary: Add user-defined timestamp support for range deletion. The new API is `DeleteRange(opt, cf, begin_key, end_key, ts)`. Most of the change is to update the comparator to compare without timestamp. Other than that, major changes are - internal range tombstone data structures (`FragmentedRangeTombstoneList`, `RangeTombstone`, etc.) to store timestamps. - Garbage collection of range tombstones and range tombstone covered keys during compaction. - Get()/MultiGet() to return the timestamp of a range tombstone when needed. - Get/Iterator with range tombstones bounded by readoptions.timestamp. - timestamp crash test now issues DeleteRange by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10661 Test Plan: - Added unit test: `make check` - Stress test: `python3 tools/db_crashtest.py --enable_ts whitebox --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4` - Ran `db_bench` to measure regression when timestamp is not enabled. The tests are for write (with some range deletion) and iterate with DB fitting in memory: `./db_bench--benchmarks=fillrandom,seekrandom --writes_per_range_tombstone=200 --max_write_buffer_number=100 --min_write_buffer_number_to_merge=100 --writes=500000 --reads=500000 --seek_nexts=10 --disable_auto_compactions -disable_wal=true --max_num_range_tombstones=1000`. Did not see consistent regression in no timestamp case. | micros/op | fillrandom | seekrandom | | --- | --- | --- | |main| 2.58 |10.96| |PR 10661| 2.68 |10.63| Reviewed By: riversand963 Differential Revision: D39441192 Pulled By: cbi42 fbshipit-source-id: f05aca3c41605caf110daf0ff405919f300ddec2
2022-09-30 23:13:03 +00:00
return true;
}
void StressTest::MaybeUseOlderTimestampForRangeScan(ThreadState* thread,
std::string& ts_str,
Slice& ts_slice,
ReadOptions& read_opts) {
if (FLAGS_user_timestamp_size == 0) {
return;
}
Add initial support to stress test persist_user_defined_timestamps (#12124) Summary: This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs. This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably: 1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up. 2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that. 3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124 Test Plan: running multiple flavor of this test on continuous run for sometime before checkin Reviewed By: ltamasi Differential Revision: D51916267 Pulled By: jowlyzhang fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
2023-12-12 17:35:29 +00:00
if (!FLAGS_persist_user_defined_timestamps) {
// Not read with older timestamps to avoid get InvalidArgument.
return;
}
assert(thread);
if (!thread->rand.OneInOpt(3)) {
return;
}
const Slice* const saved_ts = read_opts.timestamp;
assert(saved_ts != nullptr);
const SharedState* const shared = thread->shared;
assert(shared);
const uint64_t start_ts = shared->GetStartTimestamp();
uint64_t now = db_stress_env->NowNanos();
assert(now > start_ts);
uint64_t time_diff = now - start_ts;
uint64_t ts = start_ts + (thread->rand.Next64() % time_diff);
ts_str.clear();
PutFixed64(&ts_str, ts);
ts_slice = ts_str;
read_opts.timestamp = &ts_slice;
// TODO (yanqin): support Merge with iter_start_ts
if (!thread->rand.OneInOpt(3) || FLAGS_use_merge || FLAGS_use_full_merge_v1) {
return;
}
ts_str.clear();
PutFixed64(&ts_str, start_ts);
ts_slice = ts_str;
read_opts.iter_start_ts = &ts_slice;
read_opts.timestamp = saved_ts;
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
void CheckAndSetOptionsForUserTimestamp(Options& options) {
assert(FLAGS_user_timestamp_size > 0);
const Comparator* const cmp = test::BytewiseComparatorWithU64TsWrapper();
assert(cmp);
if (FLAGS_user_timestamp_size != cmp->timestamp_size()) {
fprintf(stderr,
"Only -user_timestamp_size=%d is supported in stress test.\n",
static_cast<int>(cmp->timestamp_size()));
exit(1);
}
if (FLAGS_use_txn) {
fprintf(stderr, "TransactionDB does not support timestamp yet.\n");
exit(1);
}
if (FLAGS_test_cf_consistency || FLAGS_test_batches_snapshots) {
fprintf(stderr,
"Due to per-key ts-seq ordering constraint, only the (default) "
"non-batched test is supported with timestamp.\n");
exit(1);
}
if (FLAGS_ingest_external_file_one_in > 0) {
fprintf(stderr, "Bulk loading may not support timestamp yet.\n");
exit(1);
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.comparator = cmp;
Add initial support to stress test persist_user_defined_timestamps (#12124) Summary: This PR adds initial stress testing for the user-defined timestamps in memtable only feature. Each flavor of the `*_ts` crash test get a 1 in 3 chance to run with timestamps not persisted, this setting is initialized once and kept consistent across the following re-runs. This initial stress test included these things besides disabling incompatible feature combinations to make the test run more stably: 1) It currently only run test methods that validates db state with expected state. Not the ones that validate db state by comparing result from one API to another API. Such as `TestMultiGet` (compared with `Get`), similarly `TestMultiGetEntity`, `TestIterate` (compare src iterator to a control iterator). Due to timestamps being removed, results from one API to another API is not directly comparable as it is now. More test logic to handle that need to be added, will do that in a follow up. 2) Even when comparing db state to expected state, sometimes the db can receive `InvalidArgument` too due to timestamps getting flushed and removed. Added some logic to handle that. 3) When timestamps are not persisted, we don't try to read with older timestamp. Since that's making it easier to get `InvalidArgument`. And this capability is not yet needed by our customer so it's disabled for now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12124 Test Plan: running multiple flavor of this test on continuous run for sometime before checkin Reviewed By: ltamasi Differential Revision: D51916267 Pulled By: jowlyzhang fbshipit-source-id: 3f3eb5f9618d05d296062820e0ef5cb8edc7c2b2
2023-12-12 17:35:29 +00:00
options.persist_user_defined_timestamps =
FLAGS_persist_user_defined_timestamps;
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
bool InitializeOptionsFromFile(Options& options) {
DBOptions db_options;
ConfigOptions config_options;
config_options.ignore_unknown_options = false;
config_options.input_strings_escaped = true;
config_options.env = db_stress_env;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
std::vector<ColumnFamilyDescriptor> cf_descriptors;
if (!FLAGS_options_file.empty()) {
Status s = LoadOptionsFromFile(config_options, FLAGS_options_file,
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
&db_options, &cf_descriptors);
if (!s.ok()) {
fprintf(stderr, "Unable to load options file %s --- %s\n",
FLAGS_options_file.c_str(), s.ToString().c_str());
exit(1);
}
db_options.env = new CompositeEnvWrapper(db_stress_env);
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options = Options(db_options, cf_descriptors[0].options);
return true;
}
return false;
}
void InitializeOptionsFromFlags(
const std::shared_ptr<Cache>& cache,
const std::shared_ptr<const FilterPolicy>& filter_policy,
Options& options) {
BlockBasedTableOptions block_based_options;
block_based_options.block_cache = cache;
block_based_options.cache_index_and_filter_blocks =
FLAGS_cache_index_and_filter_blocks;
block_based_options.metadata_cache_options.top_level_index_pinning =
static_cast<PinningTier>(FLAGS_top_level_index_pinning);
block_based_options.metadata_cache_options.partition_pinning =
static_cast<PinningTier>(FLAGS_partition_pinning);
block_based_options.metadata_cache_options.unpartitioned_pinning =
static_cast<PinningTier>(FLAGS_unpartitioned_pinning);
block_based_options.checksum = checksum_type_e;
block_based_options.block_size = FLAGS_block_size;
block_based_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kCompressionDictionaryBuildingBuffer,
{/*.charged = */ FLAGS_charge_compression_dictionary_building_buffer
? CacheEntryRoleOptions::Decision::kEnabled
: CacheEntryRoleOptions::Decision::kDisabled}});
block_based_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kFilterConstruction,
{/*.charged = */ FLAGS_charge_filter_construction
? CacheEntryRoleOptions::Decision::kEnabled
: CacheEntryRoleOptions::Decision::kDisabled}});
block_based_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kBlockBasedTableReader,
{/*.charged = */ FLAGS_charge_table_reader
? CacheEntryRoleOptions::Decision::kEnabled
: CacheEntryRoleOptions::Decision::kDisabled}});
Account memory of FileMetaData in global memory limit (#9924) Summary: **Context/Summary:** As revealed by heap profiling, allocation of `FileMetaData` for [newly created file added to a Version](https://github.com/facebook/rocksdb/pull/9924/files#diff-a6aa385940793f95a2c5b39cc670bd440c4547fa54fd44622f756382d5e47e43R774) can consume significant heap memory. This PR is to account that toward our global memory limit based on block cache capacity. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9924 Test Plan: - Previous `make check` verified there are only 2 places where the memory of the allocated `FileMetaData` can be released - New unit test `TEST_P(ChargeFileMetadataTestWithParam, Basic)` - db bench (CPU cost of `charge_file_metadata` in write and compact) - **write micros/op: -0.24%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 (remove this option for pre-PR) -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'` - **compact micros/op -0.87%** : `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_file_metadata=1 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 -numdistinct=1000 && ./db_bench -benchmarks=compact -db=$TEST_TMPDIR -use_existing_db=1 -charge_file_metadata=1 -disable_auto_compactions=1 | egrep 'compact'` table 1 - write #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721 20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | -0.3633711465 40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | 0.5289363078 80 | 3.87828 | 0.119007 | 3.86791 | 0.115674 | **-0.2673865734** 160 | 3.87677 | 0.162231 | 3.86739 | 0.16663 | **-0.2419539978** table 2 - compact #-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%) -- | -- | -- | -- | -- | -- 10 | 2,399,650.00 | 96,375.80 | 2,359,537.00 | 53,243.60 | -1.67 20 | 2,410,480.00 | 89,988.00 | 2,433,580.00 | 91,121.20 | 0.96 40 | 2.41E+06 | 121811 | 2.39E+06 | 131525 | **-0.96** 80 | 2.40E+06 | 134503 | 2.39E+06 | 108799 | **-0.78** - stress test: `python3 tools/db_crashtest.py blackbox --charge_file_metadata=1 --cache_size=1` killed as normal Reviewed By: ajkr Differential Revision: D36055583 Pulled By: hx235 fbshipit-source-id: b60eab94707103cb1322cf815f05810ef0232625
2022-06-14 20:06:40 +00:00
block_based_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kFileMetadata,
{/*.charged = */ FLAGS_charge_file_metadata
? CacheEntryRoleOptions::Decision::kEnabled
: CacheEntryRoleOptions::Decision::kDisabled}});
block_based_options.cache_usage_options.options_overrides.insert(
{CacheEntryRole::kBlobCache,
{/*.charged = */ FLAGS_charge_blob_cache
? CacheEntryRoleOptions::Decision::kEnabled
: CacheEntryRoleOptions::Decision::kDisabled}});
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
block_based_options.format_version =
static_cast<uint32_t>(FLAGS_format_version);
block_based_options.index_block_restart_interval =
static_cast<int32_t>(FLAGS_index_block_restart_interval);
block_based_options.filter_policy = filter_policy;
block_based_options.partition_filters = FLAGS_partition_filters;
block_based_options.optimize_filters_for_memory =
FLAGS_optimize_filters_for_memory;
block_based_options.detect_filter_construct_corruption =
FLAGS_detect_filter_construct_corruption;
block_based_options.index_type =
static_cast<BlockBasedTableOptions::IndexType>(FLAGS_index_type);
block_based_options.data_block_index_type =
static_cast<BlockBasedTableOptions::DataBlockIndexType>(
FLAGS_data_block_index_type);
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
block_based_options.prepopulate_block_cache =
static_cast<BlockBasedTableOptions::PrepopulateBlockCache>(
FLAGS_prepopulate_block_cache);
block_based_options.initial_auto_readahead_size =
FLAGS_initial_auto_readahead_size;
block_based_options.max_auto_readahead_size = FLAGS_max_auto_readahead_size;
block_based_options.num_file_reads_for_auto_readahead =
FLAGS_num_file_reads_for_auto_readahead;
block_based_options.cache_index_and_filter_blocks_with_high_priority =
FLAGS_cache_index_and_filter_blocks_with_high_priority;
block_based_options.use_delta_encoding = FLAGS_use_delta_encoding;
block_based_options.verify_compression = FLAGS_verify_compression;
block_based_options.read_amp_bytes_per_bit = FLAGS_read_amp_bytes_per_bit;
block_based_options.enable_index_compression = FLAGS_enable_index_compression;
block_based_options.index_shortening =
static_cast<BlockBasedTableOptions::IndexShorteningMode>(
FLAGS_index_shortening);
block_based_options.block_align = FLAGS_block_align;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.table_factory.reset(NewBlockBasedTableFactory(block_based_options));
options.db_write_buffer_size = FLAGS_db_write_buffer_size;
options.write_buffer_size = FLAGS_write_buffer_size;
options.max_write_buffer_number = FLAGS_max_write_buffer_number;
options.min_write_buffer_number_to_merge =
FLAGS_min_write_buffer_number_to_merge;
options.max_write_buffer_number_to_maintain =
FLAGS_max_write_buffer_number_to_maintain;
options.max_write_buffer_size_to_maintain =
FLAGS_max_write_buffer_size_to_maintain;
options.memtable_prefix_bloom_size_ratio =
FLAGS_memtable_prefix_bloom_size_ratio;
if (FLAGS_use_write_buffer_manager) {
options.write_buffer_manager.reset(
new WriteBufferManager(FLAGS_db_write_buffer_size, block_cache));
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.memtable_whole_key_filtering = FLAGS_memtable_whole_key_filtering;
options.disable_auto_compactions = FLAGS_disable_auto_compactions;
options.max_background_compactions = FLAGS_max_background_compactions;
options.max_background_flushes = FLAGS_max_background_flushes;
options.compaction_style =
static_cast<ROCKSDB_NAMESPACE::CompactionStyle>(FLAGS_compaction_style);
Add back Options::CompactionOptionsFIFO::allow_compaction to stress/crash test (#11063) Summary: **Context/Summary:** https://github.com/facebook/rocksdb/pull/10777 was reverted (https://github.com/facebook/rocksdb/pull/10999) due to internal blocker and replaced with a better fix https://github.com/facebook/rocksdb/pull/10922. However, the revert also reverted the `Options::CompactionOptionsFIFO::allow_compaction` stress/crash coverage added by the PR. It's an useful coverage cuz setting `Options::CompactionOptionsFIFO::allow_compaction=true` will [increase](https://github.com/facebook/rocksdb/blob/7.8.fb/db/version_set.cc#L3255) the compaction score of L0 files for FIFO and then trigger more FIFO compaction. This speed up discovery of bug related to FIFO compaction like https://github.com/facebook/rocksdb/pull/10955. To see the speedup, compare the failure occurrence in following commands with `Options::CompactionOptionsFIFO::allow_compaction=true/false` ``` --fifo_allow_compaction=1 --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_concurrent_memtable_write=0 --allow_data_in_errors=True --async_io=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=8.869062094789008 --bottommost_compression_type=none --bytes_per_sync=0 --cache_index_and_filter_blocks=1 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_style=2 --compaction_ttl=0 --compression_max_dict_buffer_bytes=8589934591 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=xpress --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_whitebox --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=4 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=10 --index_type=2 --ingest_external_file_one_in=100 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=False --log2_keys_per_lock=10 --long_running_snapshots=0 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=25000000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=0 --mock_direct_io=True --nooverwritepercent=1 --num_file_reads_for_auto_readahead=2 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=40000 --optimize_filters_for_memory=0 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=7 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=1000 --readahead_size=0 --readpercent=15 --recycle_log_file_num=1 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --subcompactions=2 --sync=0 --sync_fault_injection=0 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=1 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=1 --use_direct_reads=1 --use_full_merge_v1=1 --use_merge=0 --use_multiget=0 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=0 --wal_compression=none --write_buffer_size=33554432 --write_dbid_to_manifest=1 --writepercent=65 ``` Therefore this PR is adding it back to stress/crash test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11063 Test Plan: Rehearsal stress test to make sure stress/crash test is stable Reviewed By: ajkr Differential Revision: D42283650 Pulled By: hx235 fbshipit-source-id: 132e6396ab6e24d8dcb8fe51c62dd5211cdf53ef
2023-01-03 19:54:58 +00:00
if (options.compaction_style ==
ROCKSDB_NAMESPACE::CompactionStyle::kCompactionStyleFIFO) {
options.compaction_options_fifo.allow_compaction =
FLAGS_fifo_allow_compaction;
}
options.compaction_pri =
static_cast<ROCKSDB_NAMESPACE::CompactionPri>(FLAGS_compaction_pri);
options.num_levels = FLAGS_num_levels;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
if (FLAGS_prefix_size >= 0) {
options.prefix_extractor.reset(NewFixedPrefixTransform(FLAGS_prefix_size));
if (FLAGS_enable_memtable_insert_with_hint_prefix_extractor) {
options.memtable_insert_with_hint_prefix_extractor =
options.prefix_extractor;
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
}
options.max_open_files = FLAGS_open_files;
options.statistics = dbstats;
options.env = db_stress_env;
options.use_fsync = FLAGS_use_fsync;
options.compaction_readahead_size = FLAGS_compaction_readahead_size;
options.allow_mmap_reads = FLAGS_mmap_read;
options.allow_mmap_writes = FLAGS_mmap_write;
options.use_direct_reads = FLAGS_use_direct_reads;
options.use_direct_io_for_flush_and_compaction =
FLAGS_use_direct_io_for_flush_and_compaction;
options.recycle_log_file_num =
static_cast<size_t>(FLAGS_recycle_log_file_num);
options.target_file_size_base = FLAGS_target_file_size_base;
options.target_file_size_multiplier = FLAGS_target_file_size_multiplier;
options.max_bytes_for_level_base = FLAGS_max_bytes_for_level_base;
options.max_bytes_for_level_multiplier = FLAGS_max_bytes_for_level_multiplier;
options.level0_stop_writes_trigger = FLAGS_level0_stop_writes_trigger;
options.level0_slowdown_writes_trigger = FLAGS_level0_slowdown_writes_trigger;
options.level0_file_num_compaction_trigger =
FLAGS_level0_file_num_compaction_trigger;
options.compression = compression_type_e;
options.bottommost_compression = bottommost_compression_type_e;
options.compression_opts.max_dict_bytes = FLAGS_compression_max_dict_bytes;
options.compression_opts.zstd_max_train_bytes =
FLAGS_compression_zstd_max_train_bytes;
options.compression_opts.parallel_threads =
FLAGS_compression_parallel_threads;
options.compression_opts.max_dict_buffer_bytes =
FLAGS_compression_max_dict_buffer_bytes;
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857) Summary: An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857 Test Plan: #### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data: Set up: change the parameter [here](https://github.com/facebook/rocksdb/blob/fb9a167a55e0970b1ef6f67c1600c8d9c4c6114f/tools/db_bench_tool.cc#L1766) to 16384 to make synthetic data more compressible. ``` # linked local ZSTD with version 1.5.2 # DEBUG_LEVEL=0 ROCKSDB_NO_FBCODE=1 ROCKSDB_DISABLE_ZSTD=1 EXTRA_CXXFLAGS="-DZSTD_STATIC_LINKING_ONLY -DZSTD -I/data/users/changyubi/install/include/" EXTRA_LDFLAGS="-L/data/users/changyubi/install/lib/ -l:libzstd.a" make -j32 db_bench dict_bytes=16384 train_bytes=1048576 echo "========== No Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== Raw Content Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench_main -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== FinalizeDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== TrainDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total # Result: TrainDictionary is much better on space saving, but FinalizeDictionary seems to use less memory. # before compression data size: 1.2GB dict_bytes=16384 max_dict_buffer_bytes = 1048576 space cpu/memory No Dictionary 468M 14.93user 1.00system 0:15.92elapsed 100%CPU (0avgtext+0avgdata 23904maxresident)k Raw Dictionary 251M 15.81user 0.80system 0:16.56elapsed 100%CPU (0avgtext+0avgdata 156808maxresident)k FinalizeDictionary 236M 11.93user 0.64system 0:12.56elapsed 100%CPU (0avgtext+0avgdata 89548maxresident)k TrainDictionary 84M 7.29user 0.45system 0:07.75elapsed 100%CPU (0avgtext+0avgdata 97288maxresident)k ``` #### Benchmark on 10 sample SST files for spacing saving and CPU time on compression: FinalizeDictionary is comparable to TrainDictionary in terms of space saving, and takes less time in compression. ``` dict_bytes=16384 train_bytes=1048576 for sst_file in `ls ../temp/myrock-sst/` do echo "********** $sst_file **********" echo "========== No Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD echo "========== Raw Content Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes echo "========== FinalizeDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes --compression_use_zstd_finalize_dict echo "========== TrainDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes done 010240.sst (Size/Time) 011029.sst 013184.sst 021552.sst 185054.sst 185137.sst 191666.sst 7560381.sst 7604174.sst 7635312.sst No Dictionary 28165569 / 2614419 32899411 / 2976832 32977848 / 3055542 31966329 / 2004590 33614351 / 1755877 33429029 / 1717042 33611933 / 1776936 33634045 / 2771417 33789721 / 2205414 33592194 / 388254 Raw Content Dictionary 28019950 / 2697961 33748665 / 3572422 33896373 / 3534701 26418431 / 2259658 28560825 / 1839168 28455030 / 1846039 28494319 / 1861349 32391599 / 3095649 33772142 / 2407843 33592230 / 474523 FinalizeDictionary 27896012 / 2650029 33763886 / 3719427 33904283 / 3552793 26008225 / 2198033 28111872 / 1869530 28014374 / 1789771 28047706 / 1848300 32296254 / 3204027 33698698 / 2381468 33592344 / 517433 TrainDictionary 28046089 / 2740037 33706480 / 3679019 33885741 / 3629351 25087123 / 2204558 27194353 / 1970207 27234229 / 1896811 27166710 / 1903119 32011041 / 3322315 32730692 / 2406146 33608631 / 570593 ``` #### Decompression/Read test: With FinalizeDictionary/TrainDictionary, some data structure used for decompression are in stored in dictionary, so they are expected to be faster in terms of decompression/reads. ``` dict_bytes=16384 train_bytes=1048576 echo "No Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=0 > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=0 2>&1 | grep MB/s echo "Raw Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes 2>&1 | grep MB/s echo "FinalizeDict" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false 2>&1 | grep MB/s echo "Train Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes 2>&1 | grep MB/s No Dictionary readrandom : 12.183 micros/op 82082 ops/sec 12.183 seconds 1000000 operations; 9.1 MB/s (1000000 of 1000000 found) Raw Dictionary readrandom : 12.314 micros/op 81205 ops/sec 12.314 seconds 1000000 operations; 9.0 MB/s (1000000 of 1000000 found) FinalizeDict readrandom : 9.787 micros/op 102180 ops/sec 9.787 seconds 1000000 operations; 11.3 MB/s (1000000 of 1000000 found) Train Dictionary readrandom : 9.698 micros/op 103108 ops/sec 9.699 seconds 1000000 operations; 11.4 MB/s (1000000 of 1000000 found) ``` Reviewed By: ajkr Differential Revision: D35720026 Pulled By: cbi42 fbshipit-source-id: 24d230fdff0fd28a1bb650658798f00dfcfb2a1f
2022-05-20 19:09:09 +00:00
if (ZSTD_FinalizeDictionarySupported()) {
options.compression_opts.use_zstd_dict_trainer =
FLAGS_compression_use_zstd_dict_trainer;
} else if (!FLAGS_compression_use_zstd_dict_trainer) {
fprintf(
stdout,
Support using ZDICT_finalizeDictionary to generate zstd dictionary (#9857) Summary: An untrained dictionary is currently simply the concatenation of several samples. The ZSTD API, ZDICT_finalizeDictionary(), can improve such a dictionary's effectiveness at low cost. This PR changes how dictionary is created by calling the ZSTD ZDICT_finalizeDictionary() API instead of creating raw content dictionary (when max_dict_buffer_bytes > 0), and pass in all buffered uncompressed data blocks as samples. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9857 Test Plan: #### db_bench test for cpu/memory of compression+decompression and space saving on synthetic data: Set up: change the parameter [here](https://github.com/facebook/rocksdb/blob/fb9a167a55e0970b1ef6f67c1600c8d9c4c6114f/tools/db_bench_tool.cc#L1766) to 16384 to make synthetic data more compressible. ``` # linked local ZSTD with version 1.5.2 # DEBUG_LEVEL=0 ROCKSDB_NO_FBCODE=1 ROCKSDB_DISABLE_ZSTD=1 EXTRA_CXXFLAGS="-DZSTD_STATIC_LINKING_ONLY -DZSTD -I/data/users/changyubi/install/include/" EXTRA_LDFLAGS="-L/data/users/changyubi/install/lib/ -l:libzstd.a" make -j32 db_bench dict_bytes=16384 train_bytes=1048576 echo "========== No Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=0 -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== Raw Content Dictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench_main -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== FinalizeDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total echo "========== TrainDictionary ==========" TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=filluniquerandom,compact -num=10000000 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -disable_wal=true -max_write_buffer_number=8 >/dev/null 2>&1 TEST_TMPDIR=/dev/shm /usr/bin/time ./db_bench -use_existing_db=true -benchmarks=compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -block_size=4096 2>&1 | grep elapsed du -hc /dev/shm/dbbench/*sst | grep total # Result: TrainDictionary is much better on space saving, but FinalizeDictionary seems to use less memory. # before compression data size: 1.2GB dict_bytes=16384 max_dict_buffer_bytes = 1048576 space cpu/memory No Dictionary 468M 14.93user 1.00system 0:15.92elapsed 100%CPU (0avgtext+0avgdata 23904maxresident)k Raw Dictionary 251M 15.81user 0.80system 0:16.56elapsed 100%CPU (0avgtext+0avgdata 156808maxresident)k FinalizeDictionary 236M 11.93user 0.64system 0:12.56elapsed 100%CPU (0avgtext+0avgdata 89548maxresident)k TrainDictionary 84M 7.29user 0.45system 0:07.75elapsed 100%CPU (0avgtext+0avgdata 97288maxresident)k ``` #### Benchmark on 10 sample SST files for spacing saving and CPU time on compression: FinalizeDictionary is comparable to TrainDictionary in terms of space saving, and takes less time in compression. ``` dict_bytes=16384 train_bytes=1048576 for sst_file in `ls ../temp/myrock-sst/` do echo "********** $sst_file **********" echo "========== No Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD echo "========== Raw Content Dictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes echo "========== FinalizeDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes --compression_use_zstd_finalize_dict echo "========== TrainDictionary ==========" ./sst_dump --file="../temp/myrock-sst/$sst_file" --command=recompress --compression_level_from=6 --compression_level_to=6 --compression_types=kZSTD --compression_max_dict_bytes=$dict_bytes --compression_zstd_max_train_bytes=$train_bytes done 010240.sst (Size/Time) 011029.sst 013184.sst 021552.sst 185054.sst 185137.sst 191666.sst 7560381.sst 7604174.sst 7635312.sst No Dictionary 28165569 / 2614419 32899411 / 2976832 32977848 / 3055542 31966329 / 2004590 33614351 / 1755877 33429029 / 1717042 33611933 / 1776936 33634045 / 2771417 33789721 / 2205414 33592194 / 388254 Raw Content Dictionary 28019950 / 2697961 33748665 / 3572422 33896373 / 3534701 26418431 / 2259658 28560825 / 1839168 28455030 / 1846039 28494319 / 1861349 32391599 / 3095649 33772142 / 2407843 33592230 / 474523 FinalizeDictionary 27896012 / 2650029 33763886 / 3719427 33904283 / 3552793 26008225 / 2198033 28111872 / 1869530 28014374 / 1789771 28047706 / 1848300 32296254 / 3204027 33698698 / 2381468 33592344 / 517433 TrainDictionary 28046089 / 2740037 33706480 / 3679019 33885741 / 3629351 25087123 / 2204558 27194353 / 1970207 27234229 / 1896811 27166710 / 1903119 32011041 / 3322315 32730692 / 2406146 33608631 / 570593 ``` #### Decompression/Read test: With FinalizeDictionary/TrainDictionary, some data structure used for decompression are in stored in dictionary, so they are expected to be faster in terms of decompression/reads. ``` dict_bytes=16384 train_bytes=1048576 echo "No Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=0 > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=0 2>&1 | grep MB/s echo "Raw Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes 2>&1 | grep MB/s echo "FinalizeDict" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes -compression_use_zstd_dict_trainer=false 2>&1 | grep MB/s echo "Train Dictionary" TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=filluniquerandom,compact -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes > /dev/null 2>&1 TEST_TMPDIR=/dev/shm/ ./db_bench -use_existing_db=true -benchmarks=readrandom -cache_size=0 -compression_type=zstd -compression_max_dict_bytes=$dict_bytes -compression_zstd_max_train_bytes=$train_bytes 2>&1 | grep MB/s No Dictionary readrandom : 12.183 micros/op 82082 ops/sec 12.183 seconds 1000000 operations; 9.1 MB/s (1000000 of 1000000 found) Raw Dictionary readrandom : 12.314 micros/op 81205 ops/sec 12.314 seconds 1000000 operations; 9.0 MB/s (1000000 of 1000000 found) FinalizeDict readrandom : 9.787 micros/op 102180 ops/sec 9.787 seconds 1000000 operations; 11.3 MB/s (1000000 of 1000000 found) Train Dictionary readrandom : 9.698 micros/op 103108 ops/sec 9.699 seconds 1000000 operations; 11.4 MB/s (1000000 of 1000000 found) ``` Reviewed By: ajkr Differential Revision: D35720026 Pulled By: cbi42 fbshipit-source-id: 24d230fdff0fd28a1bb650658798f00dfcfb2a1f
2022-05-20 19:09:09 +00:00
"WARNING: use_zstd_dict_trainer is false but zstd finalizeDictionary "
"cannot be used because ZSTD 1.4.5+ is not linked with the binary."
" zstd dictionary trainer will be used.\n");
}
Add `CompressionOptions::checksum` for enabling ZSTD checksum (#11666) Summary: Optionally enable zstd checksum flag (https://github.com/facebook/zstd/blob/d857369028d997c92ff1f1861a4d7f679a125464/lib/zstd.h#L428) to detect corruption during decompression. Main changes are in compression.h: * User can set CompressionOptions::checksum to true to enable this feature. * We enable this feature in ZSTD by setting the checksum flag in ZSTD compression context: `ZSTD_CCtx`. * Uses `ZSTD_compress2()` to do compression since it supports frame parameter like the checksum flag. Compression level is also set in compression context as a flag. * Error handling during decompression to propagate error message from ZSTD. * Updated microbench to test read performance impact. About compatibility, the current compression decoders should continue to work with the data created by the new compression API `ZSTD_compress2()`: https://github.com/facebook/zstd/issues/3711. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11666 Test Plan: * Existing unit tests for zstd compression * Add unit test `DBTest2.ZSTDChecksum` to test the corruption case * Manually tested that compression levels, parallel compression, dictionary compression, index compression all work with the new ZSTD_compress2() API. * Manually tested with `sst_dump --command=recompress` that different compression levels and dictionary compression settings all work. * Manually tested compiling with older versions of ZSTD: v1.3.8, v1.1.0, v0.6.2. * Perf impact: from public benchmark data: http://fastcompression.blogspot.com/2019/03/presenting-xxh3.html for checksum and https://github.com/facebook/zstd#benchmarks, if decompression is 1700MB/s and checksum computation is 70000MB/s, checksum computation is an additional ~2.4% time for decompression. Compression is slower and checksumming should be less noticeable. * Microbench: ``` TEST_TMPDIR=/dev/shm ./branch_db_basic_bench --benchmark_filter=DBGet/comp_style:0/max_data:1048576/per_key_size:256/enable_statistics:0/negative_query:0/enable_filter:0/mmap:0/compression_type:7/compression_checksum:1/no_blockcache:1/iterations:10000/threads:1 --benchmark_repetitions=100 Min out of 100 runs: Main: 10390 10436 10456 10484 10499 10535 10544 10545 10565 10568 After this PR, checksum=false 10285 10397 10503 10508 10515 10557 10562 10635 10640 10660 After this PR, checksum=true 10827 10876 10925 10949 10971 11052 11061 11063 11100 11109 ``` * db_bench: ``` Write perf TEST_TMPDIR=/dev/shm/ ./db_bench_ichecksum --benchmarks=fillseq[-X10] --compression_type=zstd --num=10000000 --compression_checksum=.. [FillSeq checksum=0] fillseq [AVG 10 runs] : 281635 (± 31711) ops/sec; 31.2 (± 3.5) MB/sec fillseq [MEDIAN 10 runs] : 294027 ops/sec; 32.5 MB/sec [FillSeq checksum=1] fillseq [AVG 10 runs] : 286961 (± 34700) ops/sec; 31.7 (± 3.8) MB/sec fillseq [MEDIAN 10 runs] : 283278 ops/sec; 31.3 MB/sec Read perf TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=readrandom[-X20] --num=100000000 --reads=1000000 --use_existing_db=true --readonly=1 [Readrandom checksum=1] readrandom [AVG 20 runs] : 360928 (± 3579) ops/sec; 4.0 (± 0.0) MB/sec readrandom [MEDIAN 20 runs] : 362468 ops/sec; 4.0 MB/sec [Readrandom checksum=0] readrandom [AVG 20 runs] : 380365 (± 2384) ops/sec; 4.2 (± 0.0) MB/sec readrandom [MEDIAN 20 runs] : 379800 ops/sec; 4.2 MB/sec Compression TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=compress[-X20] --compression_type=zstd --num=100000000 --compression_checksum=1 checksum=1 compress [AVG 20 runs] : 54074 (± 634) ops/sec; 211.2 (± 2.5) MB/sec compress [MEDIAN 20 runs] : 54396 ops/sec; 212.5 MB/sec checksum=0 compress [AVG 20 runs] : 54598 (± 393) ops/sec; 213.3 (± 1.5) MB/sec compress [MEDIAN 20 runs] : 54592 ops/sec; 213.3 MB/sec Decompression: TEST_TMPDIR=/dev/shm ./db_bench_ichecksum --benchmarks=uncompress[-X20] --compression_type=zstd --compression_checksum=1 checksum = 0 uncompress [AVG 20 runs] : 167499 (± 962) ops/sec; 654.3 (± 3.8) MB/sec uncompress [MEDIAN 20 runs] : 167210 ops/sec; 653.2 MB/sec checksum = 1 uncompress [AVG 20 runs] : 167980 (± 924) ops/sec; 656.2 (± 3.6) MB/sec uncompress [MEDIAN 20 runs] : 168465 ops/sec; 658.1 MB/sec ``` Reviewed By: ajkr Differential Revision: D48019378 Pulled By: cbi42 fbshipit-source-id: 674120c6e1853c2ced1436ac8138559d0204feba
2023-08-18 22:01:59 +00:00
if (FLAGS_compression_checksum) {
options.compression_opts.checksum = true;
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.max_manifest_file_size = FLAGS_max_manifest_file_size;
options.max_subcompactions = static_cast<uint32_t>(FLAGS_subcompactions);
options.allow_concurrent_memtable_write =
FLAGS_allow_concurrent_memtable_write;
options.experimental_mempurge_threshold =
FLAGS_experimental_mempurge_threshold;
options.periodic_compaction_seconds = FLAGS_periodic_compaction_seconds;
Add offpeak feature to crash test (#12549) Summary: As title. Add offpeak feature in stress test. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12549 Test Plan: Ran stress test locally with the flag set ``` Running db_stress with pid=701060: ./db_stress ... --daily_offpeak_time_utc=04:00-08:00 ... --periodic_compaction_seconds=10 ... ... KILLED 701060 stdout: Choosing random keys with no overwrite Creating 6250000 locks 2024/04/16-11:38:19 Initializing db_stress RocksDB version : 9.2 Format version : 5 TransactionDB : false Stacked BlobDB : false Read only mode : false Atomic flush : false Manual WAL flush : true Column families : 1 Clear CFs one in : 0 Number of threads : 32 Ops per thread : 100000000 Time to live(sec) : unused Read percentage : 60% Prefix percentage : 0% Write percentage : 35% Delete percentage : 4% Delete range percentage : 1% No overwrite percentage : 1% Iterate percentage : 0% Custom ops percentage : 0% DB-write-buffer-size : 0 Write-buffer-size : 4194304 Iterations : 10 Max key : 25000000 Ratio #ops/#keys : 128.000000 Num times DB reopens : 0 Batches/snapshots : 0 Do update in place : 0 Num keys per lock : 4 Compression : LZ4 Bottommost Compression : DisableOption Checksum type : kxxHash File checksum impl : none Bloom bits / key : 18.000000 Max subcompactions : 4 Use MultiGet : false Use GetEntity : false Use MultiGetEntity : false Verification only : false Memtablerep : skip_list Test kill odd : 0 Periodic Compaction Secs : 10 Daily Offpeak UTC : 04:00-08:00 <<<<<<<<<<<<<<< Newly added Compaction TTL : 0 Compaction Pri : kMinOverlappingRatio Background Purge : 0 Write DB ID to manifest : 0 Max Write Batch Group Size: 16 Use dynamic level : 1 Read fault one in : 0 Write fault one in : 1000 Open metadata write fault one in: 8 Sync fault injection : 0 Best efforts recovery : 0 Fail if OPTIONS file error: 0 User timestamp size bytes : 0 Persist user defined timestamps : 1 WAL compression : zstd Try verify sst unique id : 1 ------------------------------------------------ ``` Reviewed By: hx235 Differential Revision: D56203102 Pulled By: jaykorean fbshipit-source-id: 11a9be7362b3b26940d74d41c8bf4ebac3f03a2d
2024-04-16 19:44:44 +00:00
options.daily_offpeak_time_utc = FLAGS_daily_offpeak_time_utc;
options.stats_dump_period_sec =
static_cast<unsigned int>(FLAGS_stats_dump_period_sec);
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.ttl = FLAGS_compaction_ttl;
options.enable_pipelined_write = FLAGS_enable_pipelined_write;
options.enable_write_thread_adaptive_yield =
FLAGS_enable_write_thread_adaptive_yield;
options.compaction_options_universal.size_ratio = FLAGS_universal_size_ratio;
options.compaction_options_universal.min_merge_width =
FLAGS_universal_min_merge_width;
options.compaction_options_universal.max_merge_width =
FLAGS_universal_max_merge_width;
options.compaction_options_universal.max_size_amplification_percent =
FLAGS_universal_max_size_amplification_percent;
options.atomic_flush = FLAGS_atomic_flush;
Add manual_wal_flush, FlushWAL() to stress/crash test (#10698) Summary: **Context/Summary:** Introduce `manual_wal_flush_one_in` as titled. - When `manual_wal_flush_one_in > 0`, we also need tracing to correctly verify recovery because WAL data can be lost in this case when `FlushWAL()` is not explicitly called by users of RocksDB (in our case, db stress) and the recovery from such potential WAL data loss is a prefix recovery that requires tracing to verify. As another consequence, we need to disable features can't run under unsync data loss with `manual_wal_flush_one_in` Incompatibilities fixed along the way: ``` db_stress: db/db_impl/db_impl_open.cc:2063: static rocksdb::Status rocksdb::DBImpl::Open(const rocksdb::DBOptions&, const string&, const std::vector<rocksdb::ColumnFamilyDescriptor>&, std::vector<rocksdb::ColumnFamilyHandle*>*, rocksdb::DB**, bool, bool): Assertion `impl->TEST_WALBufferIsEmpty()' failed. ``` - It turns out that `Writer::AddCompressionTypeRecord` before this assertion `EmitPhysicalRecord(kSetCompressionType, encode.data(), encode.size());` but do not trigger flush if `manual_wal_flush` is set . This leads to `impl->TEST_WALBufferIsEmpty()' is false. - As suggested, assertion is removed and violation case is handled by `FlushWAL(sync=true)` along with refactoring `TEST_WALBufferIsEmpty()` to be `WALBufferIsEmpty()` since it is used in prod code now. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10698 Test Plan: - Locally running `python3 tools/db_crashtest.py blackbox --manual_wal_flush_one_in=1 --manual_wal_flush=1 --sync_wal_one_in=100 --atomic_flush=1 --flush_one_in=100 --column_families=3` - Joined https://github.com/facebook/rocksdb/pull/10624 in auto CI testings with all RocksDB stress/crash test jobs Reviewed By: ajkr Differential Revision: D39593752 Pulled By: ajkr fbshipit-source-id: 3a2135bb792c52d2ffa60257d4fbc557fb04d2ce
2022-09-30 22:48:33 +00:00
options.manual_wal_flush = FLAGS_manual_wal_flush_one_in > 0 ? true : false;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.avoid_unnecessary_blocking_io = FLAGS_avoid_unnecessary_blocking_io;
options.write_dbid_to_manifest = FLAGS_write_dbid_to_manifest;
options.avoid_flush_during_recovery = FLAGS_avoid_flush_during_recovery;
options.max_write_batch_group_size_bytes =
FLAGS_max_write_batch_group_size_bytes;
options.level_compaction_dynamic_level_bytes =
FLAGS_level_compaction_dynamic_level_bytes;
options.track_and_verify_wals_in_manifest = true;
options.verify_sst_unique_id_in_manifest =
FLAGS_verify_sst_unique_id_in_manifest;
Add memtable per key-value checksum (#10281) Summary: Append per key-value checksum to internal key. These checksums are verified on read paths including Get, Iterator and during Flush. Get and Iterator will return `Corruption` status if there is a checksum verification failure. Flush will make DB become read-only upon memtable entry checksum verification failure. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10281 Test Plan: - Added new unit test cases: `make check` - Benchmark on memtable insert ``` TEST_TMPDIR=/dev/shm/memtable_write ./db_bench -benchmarks=fillseq -disable_wal=true -max_write_buffer_number=100 -num=10000000 -min_write_buffer_number_to_merge=100 # avg over 10 runs Baseline: 1166936 ops/sec memtable 2 bytes kv checksum : 1.11674e+06 ops/sec (-4%) memtable 2 bytes kv checksum + write batch 8 bytes kv checksum: 1.08579e+06 ops/sec (-6.95%) write batch 8 bytes kv checksum: 1.17979e+06 ops/sec (+1.1%) ``` - Benchmark on only memtable read: ops/sec dropped 31% for `readseq` due to time spend on verifying checksum. ops/sec for `readrandom` dropped ~6.8%. ``` # Readseq sudo TEST_TMPDIR=/dev/shm/memtable_read ./db_bench -benchmarks=fillseq,readseq"[-X20]" -disable_wal=true -max_write_buffer_number=100 -num=10000000 -min_write_buffer_number_to_merge=100 readseq [AVG 20 runs] : 7432840 (± 212005) ops/sec; 822.3 (± 23.5) MB/sec readseq [MEDIAN 20 runs] : 7573878 ops/sec; 837.9 MB/sec With -memtable_protection_bytes_per_key=2: readseq [AVG 20 runs] : 5134607 (± 119596) ops/sec; 568.0 (± 13.2) MB/sec readseq [MEDIAN 20 runs] : 5232946 ops/sec; 578.9 MB/sec # Readrandom sudo TEST_TMPDIR=/dev/shm/memtable_read ./db_bench -benchmarks=fillrandom,readrandom"[-X10]" -disable_wal=true -max_write_buffer_number=100 -num=1000000 -min_write_buffer_number_to_merge=100 readrandom [AVG 10 runs] : 140236 (± 3938) ops/sec; 9.8 (± 0.3) MB/sec readrandom [MEDIAN 10 runs] : 140545 ops/sec; 9.8 MB/sec With -memtable_protection_bytes_per_key=2: readrandom [AVG 10 runs] : 130632 (± 2738) ops/sec; 9.1 (± 0.2) MB/sec readrandom [MEDIAN 10 runs] : 130341 ops/sec; 9.1 MB/sec ``` - Stress test: `python3 -u tools/db_crashtest.py whitebox --duration=1800` Reviewed By: ajkr Differential Revision: D37607896 Pulled By: cbi42 fbshipit-source-id: fdaefb475629d2471780d4a5f5bf81b44ee56113
2022-08-12 20:51:32 +00:00
options.memtable_protection_bytes_per_key =
FLAGS_memtable_protection_bytes_per_key;
Block per key-value checksum (#11287) Summary: add option `block_protection_bytes_per_key` and implementation for block per key-value checksum. The main changes are 1. checksum construction and verification in block.cc/h 2. pass the option `block_protection_bytes_per_key` around (mainly for methods defined in table_cache.h) 3. unit tests/crash test updates Tests: * Added unit tests * Crash test: `python3 tools/db_crashtest.py blackbox --simple --block_protection_bytes_per_key=1 --write_buffer_size=1048576` Follow up (maybe as a separate PR): make sure corruption status returned from BlockIters are correctly handled. Performance: Turning on block per KV protection has a non-trivial negative impact on read performance and costs additional memory. For memory, each block includes additional 24 bytes for checksum-related states beside checksum itself. For CPU, I set up a DB of size ~1.2GB with 5M keys (32 bytes key and 200 bytes value) which compacts to ~5 SST files (target file size 256 MB) in L6 without compression. I tested readrandom performance with various block cache size (to mimic various cache hit rates): ``` SETUP make OPTIMIZE_LEVEL="-O3" USE_LTO=1 DEBUG_LEVEL=0 -j32 db_bench ./db_bench -benchmarks=fillseq,compact0,waitforcompaction,compact,waitforcompaction -write_buffer_size=33554432 -level_compaction_dynamic_level_bytes=true -max_background_jobs=8 -target_file_size_base=268435456 --num=5000000 --key_size=32 --value_size=200 --compression_type=none BENCHMARK ./db_bench --use_existing_db -benchmarks=readtocache,readrandom[-X10] --num=5000000 --key_size=32 --disable_auto_compactions --reads=1000000 --block_protection_bytes_per_key=[0|1] --cache_size=$CACHESIZE The readrandom ops/sec looks like the following: Block cache size: 2GB 1.2GB * 0.9 1.2GB * 0.8 1.2GB * 0.5 8MB Main 240805 223604 198176 161653 139040 PR prot_bytes=0 238691 226693 200127 161082 141153 PR prot_bytes=1 214983 193199 178532 137013 108211 prot_bytes=1 vs -10% -15% -10.8% -15% -23% prot_bytes=0 ``` The benchmark has a lot of variance, but there was a 5% to 25% regression in this benchmark with different cache hit rates. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11287 Reviewed By: ajkr Differential Revision: D43970708 Pulled By: cbi42 fbshipit-source-id: ef98d898b71779846fa74212b9ec9e08b7183940
2023-04-25 19:08:23 +00:00
options.block_protection_bytes_per_key = FLAGS_block_protection_bytes_per_key;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
// Integrated BlobDB
options.enable_blob_files = FLAGS_enable_blob_files;
options.min_blob_size = FLAGS_min_blob_size;
options.blob_file_size = FLAGS_blob_file_size;
options.blob_compression_type =
StringToCompressionType(FLAGS_blob_compression_type.c_str());
options.enable_blob_garbage_collection = FLAGS_enable_blob_garbage_collection;
options.blob_garbage_collection_age_cutoff =
FLAGS_blob_garbage_collection_age_cutoff;
options.blob_garbage_collection_force_threshold =
FLAGS_blob_garbage_collection_force_threshold;
options.blob_compaction_readahead_size = FLAGS_blob_compaction_readahead_size;
Make it possible to enable blob files starting from a certain LSM tree level (#10077) Summary: Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed. In order to achieve this, we would like to do the following: - Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic) - Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level` - Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` ) - Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh` - Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool) - Ideally extend the C and Java bindings with the new option - Update the BlobDB wiki to document the new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077 Reviewed By: ltamasi Differential Revision: D36884156 Pulled By: gangliao fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
2022-06-03 03:04:33 +00:00
options.blob_file_starting_level = FLAGS_blob_file_starting_level;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
if (FLAGS_use_blob_cache) {
if (FLAGS_use_shared_block_and_blob_cache) {
options.blob_cache = cache;
} else {
if (FLAGS_blob_cache_size > 0) {
LRUCacheOptions co;
co.capacity = FLAGS_blob_cache_size;
co.num_shard_bits = FLAGS_blob_cache_numshardbits;
options.blob_cache = NewLRUCache(co);
} else {
fprintf(stderr,
"Unable to create a standalone blob cache if blob_cache_size "
"<= 0.\n");
exit(1);
}
}
switch (FLAGS_prepopulate_blob_cache) {
case 0:
options.prepopulate_blob_cache = PrepopulateBlobCache::kDisable;
break;
case 1:
options.prepopulate_blob_cache = PrepopulateBlobCache::kFlushOnly;
break;
default:
fprintf(stderr, "Unknown prepopulate blob cache mode\n");
exit(1);
}
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.wal_compression =
StringToCompressionType(FLAGS_wal_compression.c_str());
options.last_level_temperature =
StringToTemperature(FLAGS_last_level_temperature.c_str());
options.default_write_temperature =
StringToTemperature(FLAGS_default_write_temperature.c_str());
options.default_temperature =
StringToTemperature(FLAGS_default_temperature.c_str());
options.preclude_last_level_data_seconds =
FLAGS_preclude_last_level_data_seconds;
options.preserve_internal_time_seconds = FLAGS_preserve_internal_time_seconds;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
switch (FLAGS_rep_factory) {
case kSkipList:
// no need to do anything
break;
case kHashSkipList:
options.memtable_factory.reset(NewHashSkipListRepFactory(10000));
break;
case kVectorRep:
options.memtable_factory.reset(new VectorRepFactory());
break;
}
Initialize merge operator explicitly in PrepareOptionsForRestoredDB() (#12033) Summary: We are seeing the following stress test failure: `Failure in DB::Get in backup/restore with: Invalid argument: merge_operator is not properly initialized. Verification failed: Backup/restore failed: Invalid argument: merge_operator is not properly initialized.`. The reason is likely that `GetColumnFamilyOptionsFromString()` does not set merge operator if it's a customized merge operator. Fixing it by initializing merge operator explicitly. Pull Request resolved: https://github.com/facebook/rocksdb/pull/12033 Test Plan: this repro gives the error consistently before this PR ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=0 --allow_concurrent_memtable_write=1 --allow_data_in_errors=True --async_io=0 --atomic_flush=1 --auto_readahead_size=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=1 --backup_max_size=1048576000000 --backup_one_in=50 --batch_protection_bytes_per_key=8 --block_protection_bytes_per_key=2 --block_size=16384 --bloom_before_level=2147483646 --bloom_bits=31.014388066505518 --bottommost_compression_type=lz4hc --bottommost_file_compaction_delay=0 --bytes_per_sync=0 --cache_index_and_filter_blocks=0 --cache_size=33554432 --cache_type=fixed_hyper_clock_cache --charge_compression_dictionary_building_buffer=1 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=1 --checkpoint_one_in=1000000 --checksum_type=kxxHash --clear_column_family_one_in=0 --column_families=1 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=3 --compaction_readahead_size=0 --compaction_ttl=10 --compressed_secondary_cache_ratio=0.0 --compressed_secondary_cache_size=0 --compression_checksum=1 --compression_max_dict_buffer_bytes=4095 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=none --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=/dev/shm/rocksdb_test/rocksdb_crashtest_blackbox --db_write_buffer_size=0 --delpercent=4 --delrangepercent=1 --destroy_db_initially=1 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --enable_thread_tracking=0 --expected_values_dir=/dev/shm/rocksdb_test/rocksdb_crashtest_expected --fail_if_options_file_error=1 --fifo_allow_compaction=0 --file_checksum_impl=xxh64 --flush_one_in=1000000 --format_version=2 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=10 --index_type=2 --ingest_external_file_one_in=0 --initial_auto_readahead_size=16384 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=1 --lock_wal_one_in=1000000 --long_running_snapshots=1 --manual_wal_flush_one_in=0 --mark_for_compaction_one_file_in=10 --max_auto_readahead_size=524288 --max_background_compactions=1 --max_bytes_for_level_base=67108864 --max_key=100 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=1048576 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=8388608 --memtable_max_range_deletions=1000 --memtable_prefix_bloom_size_ratio=0 --memtable_protection_bytes_per_key=2 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=16 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=0 --partition_filters=0 --partition_pinning=0 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=-1 --prefixpercent=0 --prepopulate_block_cache=1 --preserve_internal_time_seconds=0 --progress_reports=0 --read_fault_one_in=0 --readahead_size=0 --readpercent=50 --recycle_log_file_num=0 --reopen=0 --secondary_cache_fault_one_in=0 --set_options_one_in=0 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --stats_dump_period_sec=0 --subcompactions=1 --sync=0 --sync_fault_injection=1 --target_file_size_base=16777216 --target_file_size_multiplier=1 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_get_entity=0 --use_merge=1 --use_multi_get_entity=0 --use_multiget=1 --use_put_entity_one_in=10 --use_write_buffer_manager=0 --user_timestamp_size=0 --value_size_mult=32 --verification_only=0 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_file_checksums_one_in=1000000 --verify_iterator_with_expected_state_one_in=5 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=zstd --write_buffer_size=33554432 --write_dbid_to_manifest=0 --write_fault_one_in=0 --writepercent=35 ``` Reviewed By: hx235 Differential Revision: D50825558 Pulled By: cbi42 fbshipit-source-id: 8468dc0444c112415a515af8291ef3abec8a42de
2023-10-31 14:39:41 +00:00
InitializeMergeOperator(options);
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
if (FLAGS_enable_compaction_filter) {
options.compaction_filter_factory =
std::make_shared<DbStressCompactionFilterFactory>();
}
options.best_efforts_recovery = FLAGS_best_efforts_recovery;
options.paranoid_file_checks = FLAGS_paranoid_file_checks;
options.fail_if_options_file_error = FLAGS_fail_if_options_file_error;
if (FLAGS_user_timestamp_size > 0) {
CheckAndSetOptionsForUserTimestamp(options);
}
options.allow_data_in_errors = FLAGS_allow_data_in_errors;
Group rocksdb.sst.read.micros stat by IOActivity flush and compaction (#11288) Summary: **Context:** The existing stat rocksdb.sst.read.micros does not reflect each of compaction and flush cases but aggregate them, which is not so helpful for us to understand IO read behavior of each of them. **Summary** - Update `StopWatch` and `RandomAccessFileReader` to record `rocksdb.sst.read.micros` and `rocksdb.file.{flush/compaction}.read.micros` - Fixed the default histogram in `RandomAccessFileReader` - New field `ReadOptions/IOOptions::io_activity`; Pass `ReadOptions` through paths under db open, flush and compaction to where we can prepare `IOOptions` and pass it to `RandomAccessFileReader` - Use `thread_status_util` for assertion in `DbStressFSWrapper` for continuous testing on we are passing correct `io_activity` under db open, flush and compaction Pull Request resolved: https://github.com/facebook/rocksdb/pull/11288 Test Plan: - **Stress test** - **Db bench 1: rocksdb.sst.read.micros COUNT ≈ sum of rocksdb.file.read.flush.micros's and rocksdb.file.read.compaction.micros's.** (without blob) - May not be exactly the same due to `HistogramStat::Add` only guarantees atomic not accuracy across threads. ``` ./db_bench -db=/dev/shm/testdb/ -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 (-use_plain_table=1 -prefix_size=10) ``` ``` // BlockBasedTable rocksdb.sst.read.micros P50 : 2.009374 P95 : 4.968548 P99 : 8.110362 P100 : 43.000000 COUNT : 40456 SUM : 114805 rocksdb.file.read.flush.micros P50 : 1.871841 P95 : 3.872407 P99 : 5.540541 P100 : 43.000000 COUNT : 2250 SUM : 6116 rocksdb.file.read.compaction.micros P50 : 2.023109 P95 : 5.029149 P99 : 8.196910 P100 : 26.000000 COUNT : 38206 SUM : 108689 // PlainTable Does not apply ``` - **Db bench 2: performance** **Read** SETUP: db with 900 files ``` ./db_bench -db=/dev/shm/testdb/ -benchmarks="fillseq" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=true -target_file_size_base=655 -compression_type=none ```run till convergence ``` ./db_bench -seed=1678564177044286 -use_existing_db=true -db=/dev/shm/testdb -benchmarks=readrandom[-X60] -statistics=true -num=1000000 -disable_auto_compactions=true -compression_type=none -bloom_bits=3 ``` Pre-change `readrandom [AVG 60 runs] : 21568 (± 248) ops/sec` Post-change (no regression, -0.3%) `readrandom [AVG 60 runs] : 21486 (± 236) ops/sec` **Compaction/Flush**run till convergence ``` ./db_bench -db=/dev/shm/testdb2/ -seed=1678564177044286 -benchmarks="fillseq[-X60]" -key_size=32 -value_size=512 -num=50000 -write_buffer_size=655 -disable_auto_compactions=false -target_file_size_base=655 -compression_type=none rocksdb.sst.read.micros COUNT : 33820 rocksdb.sst.read.flush.micros COUNT : 1800 rocksdb.sst.read.compaction.micros COUNT : 32020 ``` Pre-change `fillseq [AVG 46 runs] : 1391 (± 214) ops/sec; 0.7 (± 0.1) MB/sec` Post-change (no regression, ~-0.4%) `fillseq [AVG 46 runs] : 1385 (± 216) ops/sec; 0.7 (± 0.1) MB/sec` Reviewed By: ajkr Differential Revision: D44007011 Pulled By: hx235 fbshipit-source-id: a54c89e4846dfc9a135389edf3f3eedfea257132
2023-04-21 16:07:18 +00:00
options.enable_thread_tracking = FLAGS_enable_thread_tracking;
options.memtable_max_range_deletions = FLAGS_memtable_max_range_deletions;
Delay bottommost level single file compactions (#11701) Summary: For leveled compaction, RocksDB has a special kind of compaction with reason "kBottommmostFiles" that compacts bottommost level files to clear data held by snapshots (more detail in https://github.com/facebook/rocksdb/issues/3009). Such compactions can happen soon after a relevant snapshot is released. For some use cases, a bottommost file may contain only a small amount of keys that can be cleared, so compacting such a file has a high write amp. In addition, these bottommost files may be compacted in compactions with reason other than "kBottommmostFiles" if we wait for some time (so that enough data is ingested to trigger such a compaction). This PR introduces an option `bottommost_file_compaction_delay` to specify the delay of these bottommost level single file compactions. * The main change is in `VersionStorageInfo::ComputeBottommostFilesMarkedForCompaction()` where we only add a file to `bottommost_files_marked_for_compaction_` if it oldest_snapshot is larger than its non-zero largest_seqno **and** the file is old enough. Note that if a file is not old enough but its largest_seqno is less than oldest_snapshot, we exclude it from the calculation of `bottommost_files_mark_threshold_`. This makes the change simpler, but such a file's eligibility for compaction will only be checked the next time `ComputeBottommostFilesMarkedForCompaction()` is called. This happens when a new Version is created (compaction, flush, SetOptions()...), a new enough snapshot is released (`VersionStorageInfo::UpdateOldestSnapshot()`) or when a compaction is picked and compaction score has to be re-calculated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11701 Test Plan: * Add two unit tests to test when bottommost_file_compaction_delay > 0. * Ran crash test with the new option. Reviewed By: jaykorean, ajkr Differential Revision: D48331564 Pulled By: cbi42 fbshipit-source-id: c584f3dc5f6354fce3ed65f4c6366dc450b15ba8
2023-08-17 00:45:44 +00:00
options.bottommost_file_compaction_delay =
FLAGS_bottommost_file_compaction_delay;
options.allow_fallocate = FLAGS_allow_fallocate;
options.table_cache_numshardbits = FLAGS_table_cache_numshardbits;
options.log_readahead_size = FLAGS_log_readahead_size;
options.bgerror_resume_retry_interval = FLAGS_bgerror_resume_retry_interval;
options.delete_obsolete_files_period_micros =
FLAGS_delete_obsolete_files_period_micros;
options.max_log_file_size = FLAGS_max_log_file_size;
options.log_file_time_to_roll = FLAGS_log_file_time_to_roll;
options.use_adaptive_mutex = FLAGS_use_adaptive_mutex;
options.advise_random_on_open = FLAGS_advise_random_on_open;
// TODO (hx235): test the functionality of `WAL_ttl_seconds`,
// `WAL_size_limit_MB` i.e, `GetUpdatesSince()`
options.WAL_ttl_seconds = FLAGS_WAL_ttl_seconds;
options.WAL_size_limit_MB = FLAGS_WAL_size_limit_MB;
options.wal_bytes_per_sync = FLAGS_wal_bytes_per_sync;
options.strict_bytes_per_sync = FLAGS_strict_bytes_per_sync;
options.avoid_flush_during_shutdown = FLAGS_avoid_flush_during_shutdown;
options.dump_malloc_stats = FLAGS_dump_malloc_stats;
options.stats_history_buffer_size = FLAGS_stats_history_buffer_size;
options.skip_stats_update_on_db_open = FLAGS_skip_stats_update_on_db_open;
options.optimize_filters_for_hits = FLAGS_optimize_filters_for_hits;
options.sample_for_compression = FLAGS_sample_for_compression;
options.report_bg_io_stats = FLAGS_report_bg_io_stats;
options.manifest_preallocation_size = FLAGS_manifest_preallocation_size;
if (FLAGS_enable_checksum_handoff) {
options.checksum_handoff_file_types = {FileTypeSet::All()};
} else {
options.checksum_handoff_file_types = {};
}
options.max_total_wal_size = FLAGS_max_total_wal_size;
options.soft_pending_compaction_bytes_limit =
FLAGS_soft_pending_compaction_bytes_limit;
options.hard_pending_compaction_bytes_limit =
FLAGS_hard_pending_compaction_bytes_limit;
options.max_sequential_skip_in_iterations =
FLAGS_max_sequential_skip_in_iterations;
if (FLAGS_enable_sst_partitioner_factory) {
options.sst_partitioner_factory = std::shared_ptr<SstPartitionerFactory>(
NewSstPartitionerFixedPrefixFactory(1));
}
options.lowest_used_cache_tier =
static_cast<CacheTier>(FLAGS_lowest_used_cache_tier);
options.inplace_update_support = FLAGS_inplace_update_support;
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
}
void InitializeOptionsGeneral(
const std::shared_ptr<Cache>& cache,
const std::shared_ptr<const FilterPolicy>& filter_policy,
Options& options) {
options.create_missing_column_families = true;
options.create_if_missing = true;
if (!options.statistics) {
options.statistics = dbstats;
}
if (options.env == Options().env) {
options.env = db_stress_env;
}
assert(options.table_factory);
auto table_options =
options.table_factory->GetOptions<BlockBasedTableOptions>();
if (table_options) {
if (FLAGS_cache_size > 0) {
table_options->block_cache = cache;
}
if (!table_options->filter_policy) {
table_options->filter_policy = filter_policy;
}
}
// TODO: row_cache, thread-pool IO priority, CPU priority.
if (!options.rate_limiter) {
if (FLAGS_rate_limiter_bytes_per_sec > 0) {
options.rate_limiter.reset(NewGenericRateLimiter(
FLAGS_rate_limiter_bytes_per_sec, 1000 /* refill_period_us */,
10 /* fairness */,
FLAGS_rate_limit_bg_reads ? RateLimiter::Mode::kReadsOnly
: RateLimiter::Mode::kWritesOnly));
}
}
if (!options.file_checksum_gen_factory) {
options.file_checksum_gen_factory =
GetFileChecksumImpl(FLAGS_file_checksum_impl);
}
if (FLAGS_sst_file_manager_bytes_per_sec > 0 ||
FLAGS_sst_file_manager_bytes_per_truncate > 0) {
Status status;
options.sst_file_manager.reset(NewSstFileManager(
db_stress_env, options.info_log, "" /* trash_dir */,
static_cast<int64_t>(FLAGS_sst_file_manager_bytes_per_sec),
true /* delete_existing_trash */, &status,
0.25 /* max_trash_db_ratio */,
FLAGS_sst_file_manager_bytes_per_truncate));
if (!status.ok()) {
fprintf(stderr, "SstFileManager creation failed: %s\n",
status.ToString().c_str());
exit(1);
}
}
db_stress option to preserve all files until verification success (#10659) Summary: In `db_stress`, DB and expected state files containing changes leading up to a verification failure are often deleted, which makes debugging such failures difficult. On the DB side, flushed WAL files and compacted SST files are marked obsolete and then deleted. Without those files, we cannot pinpoint where a key that failed verification changed unexpectedly. On the expected state side, files for verifying prefix-recoverability in the presence of unsynced data loss are deleted before verification. These include a baseline state file containing the expected state at the time of the last successful verification, and a trace file containing all operations since then. Without those files, we cannot know the sequence of DB operations expected to be recovered. This PR attempts to address this gap with a new `db_stress` flag: `preserve_unverified_changes`. Setting `preserve_unverified_changes=1` has two effects. First, prior to startup verification, `db_stress` hardlinks all DB and expected state files in "unverified/" subdirectories of `FLAGS_db` and `FLAGS_expected_values_dir`. The separate directories are needed because the pre-verification opening process deletes files written by the previous `db_stress` run as described above. These "unverified/" subdirectories are cleaned up following startup verification success. I considered other approaches for preserving DB files through startup verification, like using a read-only DB or preventing deletion of DB files externally, e.g., in the `Env` layer. However, I decided against it since such an approach would not work for expected state files, and I did not want to change the DB management logic. If there were a way to disable DB file deletions before regular DB open, I would have preferred to use that. Second, `db_stress` attempts to keep all DB and expected state files that were live at some point since the start of the `db_stress` run. This is a bit tricky and involves the following changes. - Open the DB with `disable_auto_compactions=1` and `avoid_flush_during_recovery=1` - DisableFileDeletions() - EnableAutoCompactions() For this part, too, I would have preferred to use a hypothetical API that disables DB file deletion before regular DB open. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10659 Reviewed By: hx235 Differential Revision: D39407454 Pulled By: ajkr fbshipit-source-id: 6e981025c7dce147649d2e770728471395a7fa53
2022-09-12 21:49:38 +00:00
if (FLAGS_preserve_unverified_changes) {
if (!options.avoid_flush_during_recovery) {
fprintf(stderr,
"WARNING: flipping `avoid_flush_during_recovery` to true for "
"`preserve_unverified_changes` to keep all files\n");
options.avoid_flush_during_recovery = true;
}
// Together with `avoid_flush_during_recovery == true`, this will prevent
// live files from becoming obsolete and deleted between `DB::Open()` and
// `DisableFileDeletions()` due to flush or compaction. We do not need to
// warn the user since we will reenable compaction soon.
options.disable_auto_compactions = true;
}
Avoid overwriting options loaded from OPTIONS (#9943) Summary: This is similar to https://github.com/facebook/rocksdb/issues/9862, including the following fixes/refactoring: 1. If OPTIONS file is specified via `-options_file`, majority of options will be loaded from the file. We should not overwrite options that have been loaded from the file. Instead, we configure only fields of options which are shared objects and not set by the OPTIONS file. We also configure a few fields, e.g. `create_if_missing` necessary for stress test to run. 2. Refactor options initialization into three functions, `InitializeOptionsFromFile()`, `InitializeOptionsFromFlags()` and `InitializeOptionsGeneral()` similar to db_bench. I hope they can be shared in the future. The high-level logic is as follows: ```cpp if (!InitializeOptionsFromFile(...)) { InitializeOptionsFromFlags(...); } InitializeOptionsGeneral(...); ``` 3. Currently, the setting for `block_cache_compressed` does not seem correct because it by default specifies a size of `numeric_limits<size_t>::max()` ((size_t)-1). According to code comments, `-1` indicates default value, which should be referring to `num_shard_bits` argument. 4. Clarify `fail_if_options_file_error`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9943 Test Plan: 1. make check 2. Run stress tests, and manually check generated OPTIONS file and compare them with input OPTIONS files Reviewed By: jay-zhuang Differential Revision: D36133769 Pulled By: riversand963 fbshipit-source-id: 35dacdc090a0a72c922907170cd132b9ecaa073e
2022-05-18 19:43:50 +00:00
options.table_properties_collector_factories.emplace_back(
std::make_shared<DbStressTablePropertiesCollectorFactory>());
}
} // namespace ROCKSDB_NAMESPACE
#endif // GFLAGS