rocksdb/db/memtable_list.cc

889 lines
32 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
2013-12-11 03:03:13 +00:00
#include "db/memtable_list.h"
#include <cinttypes>
#include <limits>
#include <queue>
#include <string>
#include "db/db_impl/db_impl.h"
#include "db/memtable.h"
#include "db/range_tombstone_fragmenter.h"
#include "db/version_set.h"
#include "logging/log_buffer.h"
#include "monitoring/thread_status_util.h"
#include "rocksdb/db.h"
#include "rocksdb/env.h"
#include "rocksdb/iterator.h"
#include "table/merging_iterator.h"
#include "test_util/sync_point.h"
#include "util/coding.h"
namespace ROCKSDB_NAMESPACE {
class InternalKeyComparator;
class Mutex;
class VersionSet;
void MemTableListVersion::AddMemTable(MemTable* m) {
memlist_.push_front(m);
*parent_memtable_list_memory_usage_ += m->ApproximateMemoryUsage();
}
void MemTableListVersion::UnrefMemTable(autovector<MemTable*>* to_delete,
MemTable* m) {
if (m->Unref()) {
to_delete->push_back(m);
assert(*parent_memtable_list_memory_usage_ >= m->ApproximateMemoryUsage());
*parent_memtable_list_memory_usage_ -= m->ApproximateMemoryUsage();
}
}
MemTableListVersion::MemTableListVersion(
size_t* parent_memtable_list_memory_usage, const MemTableListVersion& old)
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
: max_write_buffer_number_to_maintain_(
old.max_write_buffer_number_to_maintain_),
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
max_write_buffer_size_to_maintain_(
old.max_write_buffer_size_to_maintain_),
parent_memtable_list_memory_usage_(parent_memtable_list_memory_usage) {
memlist_ = old.memlist_;
for (auto& m : memlist_) {
m->Ref();
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
memlist_history_ = old.memlist_history_;
for (auto& m : memlist_history_) {
m->Ref();
}
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
MemTableListVersion::MemTableListVersion(
size_t* parent_memtable_list_memory_usage,
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
int max_write_buffer_number_to_maintain,
int64_t max_write_buffer_size_to_maintain)
: max_write_buffer_number_to_maintain_(max_write_buffer_number_to_maintain),
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
max_write_buffer_size_to_maintain_(max_write_buffer_size_to_maintain),
parent_memtable_list_memory_usage_(parent_memtable_list_memory_usage) {}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
void MemTableListVersion::Ref() { ++refs_; }
// called by superversion::clean()
void MemTableListVersion::Unref(autovector<MemTable*>* to_delete) {
2014-01-25 21:50:30 +00:00
assert(refs_ >= 1);
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
--refs_;
if (refs_ == 0) {
// if to_delete is equal to nullptr it means we're confident
// that refs_ will not be zero
assert(to_delete != nullptr);
for (const auto& m : memlist_) {
UnrefMemTable(to_delete, m);
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
for (const auto& m : memlist_history_) {
UnrefMemTable(to_delete, m);
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
}
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
delete this;
}
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
int MemTableList::NumNotFlushed() const {
int size = static_cast<int>(current_->memlist_.size());
assert(num_flush_not_started_ <= size);
return size;
}
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
int MemTableList::NumFlushed() const {
return static_cast<int>(current_->memlist_history_.size());
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
}
// Search all the memtables starting from the most recent one.
// Return the most recent value found, if any.
// Operands stores the list of merge operations to apply, so far.
bool MemTableListVersion::Get(const LookupKey& key, std::string* value,
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
std::string* timestamp, Status* s,
MergeContext* merge_context,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
SequenceNumber* max_covering_tombstone_seq,
SequenceNumber* seq, const ReadOptions& read_opts,
ReadCallback* callback, bool* is_blob_index) {
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
return GetFromList(&memlist_, key, value, timestamp, s, merge_context,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
max_covering_tombstone_seq, seq, read_opts, callback,
is_blob_index);
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
}
MultiGet batching in memtable (#5818) Summary: RocksDB has a MultiGet() API that implements batched key lookup for higher performance (https://github.com/facebook/rocksdb/blob/master/include/rocksdb/db.h#L468). Currently, batching is implemented in BlockBasedTableReader::MultiGet() for SST file lookups. One of the ways it improves performance is by pipelining bloom filter lookups (by prefetching required cachelines for all the keys in the batch, and then doing the probe) and thus hiding the cache miss latency. The same concept can be extended to the memtable as well. This PR involves implementing a pipelined bloom filter lookup in DynamicBloom, and implementing MemTable::MultiGet() that can leverage it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5818 Test Plan: Existing tests Performance Test: Ran the below command which fills up the memtable and makes sure there are no flushes and then call multiget. Ran it on master and on the new change and see atleast 1% performance improvement across all the test runs I did. Sometimes the improvement was upto 5%. TEST_TMPDIR=/data/users/$USER/benchmarks/feature/ numactl -C 10 ./db_bench -benchmarks="fillseq,multireadrandom" -num=600000 -compression_type="none" -level_compaction_dynamic_level_bytes -write_buffer_size=200000000 -target_file_size_base=200000000 -max_bytes_for_level_base=16777216 -reads=90000 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4 -statistics -memtable_whole_key_filtering=true -memtable_bloom_size_ratio=10 Differential Revision: D17578869 Pulled By: vjnadimpalli fbshipit-source-id: 23dc651d9bf49db11d22375bf435708875a1f192
2019-10-10 16:37:38 +00:00
void MemTableListVersion::MultiGet(const ReadOptions& read_options,
MultiGetRange* range, ReadCallback* callback,
bool* is_blob) {
for (auto memtable : memlist_) {
memtable->MultiGet(read_options, range, callback, is_blob);
if (range->empty()) {
return;
}
}
}
New API to get all merge operands for a Key (#5604) Summary: This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases: 1. Update subset of columns and read subset of columns - Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU. 2. Updating very few attributes in a value which is a JSON-like document - Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge. ---------------------------------------------------------------------------------------------------- API : Status GetMergeOperands( const ReadOptions& options, ColumnFamilyHandle* column_family, const Slice& key, PinnableSlice* merge_operands, GetMergeOperandsOptions* get_merge_operands_options, int* number_of_operands) Example usage : int size = 100; int number_of_operands = 0; std::vector<PinnableSlice> values(size); GetMergeOperandsOptions merge_operands_info; db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands); Description : Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion. merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604 Test Plan: Added unit test and perf test in db_bench that can be run using the command: ./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist Differential Revision: D16657366 Pulled By: vjnadimpalli fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
2019-08-06 21:22:34 +00:00
bool MemTableListVersion::GetMergeOperands(
const LookupKey& key, Status* s, MergeContext* merge_context,
SequenceNumber* max_covering_tombstone_seq, const ReadOptions& read_opts) {
for (MemTable* memtable : memlist_) {
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
bool done = memtable->Get(key, /*value*/ nullptr, /*timestamp*/ nullptr, s,
merge_context, max_covering_tombstone_seq,
read_opts, nullptr, nullptr, false);
New API to get all merge operands for a Key (#5604) Summary: This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases: 1. Update subset of columns and read subset of columns - Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU. 2. Updating very few attributes in a value which is a JSON-like document - Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge. ---------------------------------------------------------------------------------------------------- API : Status GetMergeOperands( const ReadOptions& options, ColumnFamilyHandle* column_family, const Slice& key, PinnableSlice* merge_operands, GetMergeOperandsOptions* get_merge_operands_options, int* number_of_operands) Example usage : int size = 100; int number_of_operands = 0; std::vector<PinnableSlice> values(size); GetMergeOperandsOptions merge_operands_info; db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands); Description : Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion. merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604 Test Plan: Added unit test and perf test in db_bench that can be run using the command: ./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist Differential Revision: D16657366 Pulled By: vjnadimpalli fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
2019-08-06 21:22:34 +00:00
if (done) {
return true;
}
}
return false;
}
bool MemTableListVersion::GetFromHistory(
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
const LookupKey& key, std::string* value, std::string* timestamp, Status* s,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
MergeContext* merge_context, SequenceNumber* max_covering_tombstone_seq,
SequenceNumber* seq, const ReadOptions& read_opts, bool* is_blob_index) {
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
return GetFromList(&memlist_history_, key, value, timestamp, s, merge_context,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
max_covering_tombstone_seq, seq, read_opts,
nullptr /*read_callback*/, is_blob_index);
}
bool MemTableListVersion::GetFromList(
std::list<MemTable*>* list, const LookupKey& key, std::string* value,
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
std::string* timestamp, Status* s, MergeContext* merge_context,
Use only "local" range tombstones during Get (#4449) Summary: Previously, range tombstones were accumulated from every level, which was necessary if a range tombstone in a higher level covered a key in a lower level. However, RangeDelAggregator::AddTombstones's complexity is based on the number of tombstones that are currently stored in it, which is wasteful in the Get case, where we only need to know the highest sequence number of range tombstones that cover the key from higher levels, and compute the highest covering sequence number at the current level. This change introduces this optimization, and removes the use of RangeDelAggregator from the Get path. In the benchmark results, the following command was used to initialize the database: ``` ./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8 ``` ...and the following command was used to measure read throughput: ``` ./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32 ``` The filluniquerandom command was only run once, and the resulting database was used to measure read performance before and after the PR. Both binaries were compiled with `DEBUG_LEVEL=0`. Readrandom results before PR: ``` readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found) ``` Readrandom results after PR: ``` readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found) ``` So it's actually slower right now, but this PR paves the way for future optimizations (see #4493). ---- Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449 Differential Revision: D10370575 Pulled By: abhimadan fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 19:29:29 +00:00
SequenceNumber* max_covering_tombstone_seq, SequenceNumber* seq,
const ReadOptions& read_opts, ReadCallback* callback, bool* is_blob_index) {
*seq = kMaxSequenceNumber;
for (auto& memtable : *list) {
SequenceNumber current_seq = kMaxSequenceNumber;
return timestamp from get (#6409) Summary: Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included. ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks. base line (commit 72ee067b9): 101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found) This PR: 100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found) ./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32 Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409 Differential Revision: D20200086 Pulled By: riversand963 fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 23:58:32 +00:00
bool done = memtable->Get(key, value, timestamp, s, merge_context,
max_covering_tombstone_seq, &current_seq,
read_opts, callback, is_blob_index);
if (*seq == kMaxSequenceNumber) {
// Store the most recent sequence number of any operation on this key.
// Since we only care about the most recent change, we only need to
// return the first operation found when searching memtables in
// reverse-chronological order.
// current_seq would be equal to kMaxSequenceNumber if the value was to be
// skipped. This allows seq to be assigned again when the next value is
// read.
*seq = current_seq;
}
if (done) {
Cache fragmented range tombstones in BlockBasedTableReader (#4493) Summary: This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses. On the same DB used in #4449, running `readrandom` results in the following: ``` readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found) ``` Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results): ``` Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s ----------------- | ------------- | ---------------- | ------------ | ------------ None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41 500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65 500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52 1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57 1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94 5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85 5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55 10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36 10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82 25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93 25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81 50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49 50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32 ``` After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493 Differential Revision: D10842844 Pulled By: abhimadan fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
2018-10-26 02:25:00 +00:00
assert(*seq != kMaxSequenceNumber || s->IsNotFound());
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
return true;
}
if (!done && !s->ok() && !s->IsMergeInProgress() && !s->IsNotFound()) {
return false;
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
}
return false;
}
Status MemTableListVersion::AddRangeTombstoneIterators(
const ReadOptions& read_opts, Arena* /*arena*/,
RangeDelAggregator* range_del_agg) {
assert(range_del_agg != nullptr);
// Except for snapshot read, using kMaxSequenceNumber is OK because these
// are immutable memtables.
SequenceNumber read_seq = read_opts.snapshot != nullptr
? read_opts.snapshot->GetSequenceNumber()
: kMaxSequenceNumber;
for (auto& m : memlist_) {
std::unique_ptr<FragmentedRangeTombstoneIterator> range_del_iter(
m->NewRangeTombstoneIterator(read_opts, read_seq));
range_del_agg->AddTombstones(std::move(range_del_iter));
}
return Status::OK();
}
void MemTableListVersion::AddIterators(
const ReadOptions& options, std::vector<InternalIterator*>* iterator_list,
Arena* arena) {
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
for (auto& m : memlist_) {
iterator_list->push_back(m->NewIterator(options, arena));
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
}
}
void MemTableListVersion::AddIterators(
const ReadOptions& options, MergeIteratorBuilder* merge_iter_builder) {
for (auto& m : memlist_) {
merge_iter_builder->AddIterator(
m->NewIterator(options, merge_iter_builder->GetArena()));
}
}
uint64_t MemTableListVersion::GetTotalNumEntries() const {
uint64_t total_num = 0;
for (auto& m : memlist_) {
total_num += m->num_entries();
}
return total_num;
}
MemTable::MemTableStats MemTableListVersion::ApproximateStats(
const Slice& start_ikey, const Slice& end_ikey) {
MemTable::MemTableStats total_stats = {0, 0};
for (auto& m : memlist_) {
auto mStats = m->ApproximateStats(start_ikey, end_ikey);
total_stats.size += mStats.size;
total_stats.count += mStats.count;
}
return total_stats;
}
uint64_t MemTableListVersion::GetTotalNumDeletes() const {
uint64_t total_num = 0;
for (auto& m : memlist_) {
total_num += m->num_deletes();
}
return total_num;
}
SequenceNumber MemTableListVersion::GetEarliestSequenceNumber(
bool include_history) const {
if (include_history && !memlist_history_.empty()) {
return memlist_history_.back()->GetEarliestSequenceNumber();
} else if (!memlist_.empty()) {
return memlist_.back()->GetEarliestSequenceNumber();
} else {
return kMaxSequenceNumber;
}
}
2014-01-27 01:40:43 +00:00
// caller is responsible for referencing m
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
void MemTableListVersion::Add(MemTable* m, autovector<MemTable*>* to_delete) {
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
assert(refs_ == 1); // only when refs_ == 1 is MemTableListVersion mutable
AddMemTable(m);
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
TrimHistory(to_delete, m->ApproximateMemoryUsage());
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
// Removes m from list of memtables not flushed. Caller should NOT Unref m.
void MemTableListVersion::Remove(MemTable* m,
autovector<MemTable*>* to_delete) {
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
assert(refs_ == 1); // only when refs_ == 1 is MemTableListVersion mutable
memlist_.remove(m);
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
m->MarkFlushed();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
if (max_write_buffer_size_to_maintain_ > 0 ||
max_write_buffer_number_to_maintain_ > 0) {
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
memlist_history_.push_front(m);
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
// Unable to get size of mutable memtable at this point, pass 0 to
// TrimHistory as a best effort.
TrimHistory(to_delete, 0);
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
} else {
UnrefMemTable(to_delete, m);
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
}
}
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
// return the total memory usage assuming the oldest flushed memtable is dropped
size_t MemTableListVersion::ApproximateMemoryUsageExcludingLast() const {
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
size_t total_memtable_size = 0;
for (auto& memtable : memlist_) {
total_memtable_size += memtable->ApproximateMemoryUsage();
}
for (auto& memtable : memlist_history_) {
total_memtable_size += memtable->ApproximateMemoryUsage();
}
if (!memlist_history_.empty()) {
total_memtable_size -= memlist_history_.back()->ApproximateMemoryUsage();
}
return total_memtable_size;
}
bool MemTableListVersion::MemtableLimitExceeded(size_t usage) {
if (max_write_buffer_size_to_maintain_ > 0) {
// calculate the total memory usage after dropping the oldest flushed
// memtable, compare with max_write_buffer_size_to_maintain_ to decide
// whether to trim history
return ApproximateMemoryUsageExcludingLast() + usage >=
static_cast<size_t>(max_write_buffer_size_to_maintain_);
} else if (max_write_buffer_number_to_maintain_ > 0) {
return memlist_.size() + memlist_history_.size() >
static_cast<size_t>(max_write_buffer_number_to_maintain_);
} else {
return false;
}
}
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
// Make sure we don't use up too much space in history
bool MemTableListVersion::TrimHistory(autovector<MemTable*>* to_delete,
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
size_t usage) {
bool ret = false;
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
while (MemtableLimitExceeded(usage) && !memlist_history_.empty()) {
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
MemTable* x = memlist_history_.back();
memlist_history_.pop_back();
UnrefMemTable(to_delete, x);
ret = true;
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
}
return ret;
}
// Returns true if there is at least one memtable on which flush has
// not yet started.
bool MemTableList::IsFlushPending() const {
if ((flush_requested_ && num_flush_not_started_ > 0) ||
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
(num_flush_not_started_ >= min_write_buffer_number_to_merge_)) {
assert(imm_flush_needed.load(std::memory_order_relaxed));
return true;
}
return false;
}
// Returns the memtables that need to be flushed.
void MemTableList::PickMemtablesToFlush(uint64_t max_memtable_id,
autovector<MemTable*>* ret) {
Allow GetThreadList() to report operation stage. Summary: Allow GetThreadList() to report operation stage. Test Plan: ./thread_list_test ./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \ --max_background_compactions=10 --max_background_flushes=3 \ --thread_status_per_interval=1000 --key_size=16 --value_size=1000 \ --num_column_families=10 export ROCKSDB_TESTS=ThreadStatus ./db_test Sample output ThreadID ThreadType cfName Operation OP_StartTime ElapsedTime Stage State 140116265861184 Low Pri 140116270055488 Low Pri 140116274249792 High Pri column_family_name_000005 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116400078912 Low Pri column_family_name_000004 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116358135872 Low Pri column_family_name_000006 Compaction 2015/03/10-14:58:10 1 us CompactionJob::FinishCompactionOutputFile 140116341358656 Low Pri 140116295221312 High Pri default Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116324581440 Low Pri column_family_name_000009 Compaction 2015/03/10-14:58:11 0 us CompactionJob::ProcessKeyValueCompaction 140116278444096 Low Pri 140116299415616 Low Pri column_family_name_000008 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116291027008 High Pri column_family_name_000001 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116286832704 Low Pri column_family_name_000002 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116282638400 Low Pri Reviewers: rven, igor, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D34683
2015-03-13 17:45:40 +00:00
AutoThreadOperationStageUpdater stage_updater(
ThreadStatus::STAGE_PICK_MEMTABLES_TO_FLUSH);
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
const auto& memlist = current_->memlist_;
bool atomic_flush = false;
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
for (auto it = memlist.rbegin(); it != memlist.rend(); ++it) {
MemTable* m = *it;
if (!atomic_flush && m->atomic_flush_seqno_ != kMaxSequenceNumber) {
atomic_flush = true;
}
if (m->GetID() > max_memtable_id) {
break;
}
if (!m->flush_in_progress_) {
assert(!m->flush_completed_);
num_flush_not_started_--;
if (num_flush_not_started_ == 0) {
imm_flush_needed.store(false, std::memory_order_release);
}
m->flush_in_progress_ = true; // flushing will start very soon
ret->push_back(m);
}
}
if (!atomic_flush || num_flush_not_started_ == 0) {
flush_requested_ = false; // start-flush request is complete
}
}
void MemTableList::RollbackMemtableFlush(const autovector<MemTable*>& mems,
uint64_t /*file_number*/) {
Allow GetThreadList() to report operation stage. Summary: Allow GetThreadList() to report operation stage. Test Plan: ./thread_list_test ./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \ --max_background_compactions=10 --max_background_flushes=3 \ --thread_status_per_interval=1000 --key_size=16 --value_size=1000 \ --num_column_families=10 export ROCKSDB_TESTS=ThreadStatus ./db_test Sample output ThreadID ThreadType cfName Operation OP_StartTime ElapsedTime Stage State 140116265861184 Low Pri 140116270055488 Low Pri 140116274249792 High Pri column_family_name_000005 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116400078912 Low Pri column_family_name_000004 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116358135872 Low Pri column_family_name_000006 Compaction 2015/03/10-14:58:10 1 us CompactionJob::FinishCompactionOutputFile 140116341358656 Low Pri 140116295221312 High Pri default Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116324581440 Low Pri column_family_name_000009 Compaction 2015/03/10-14:58:11 0 us CompactionJob::ProcessKeyValueCompaction 140116278444096 Low Pri 140116299415616 Low Pri column_family_name_000008 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116291027008 High Pri column_family_name_000001 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116286832704 Low Pri column_family_name_000002 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116282638400 Low Pri Reviewers: rven, igor, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D34683
2015-03-13 17:45:40 +00:00
AutoThreadOperationStageUpdater stage_updater(
ThreadStatus::STAGE_MEMTABLE_ROLLBACK);
assert(!mems.empty());
// If the flush was not successful, then just reset state.
2015-04-25 09:14:27 +00:00
// Maybe a succeeding attempt to flush will be successful.
for (MemTable* m : mems) {
assert(m->flush_in_progress_);
assert(m->file_number_ == 0);
m->flush_in_progress_ = false;
m->flush_completed_ = false;
m->edit_.Clear();
num_flush_not_started_++;
}
imm_flush_needed.store(true, std::memory_order_release);
}
// Try record a successful flush in the manifest file. It might just return
// Status::OK letting a concurrent flush to do actual the recording..
Status MemTableList::TryInstallMemtableFlushResults(
ColumnFamilyData* cfd, const MutableCFOptions& mutable_cf_options,
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
const autovector<MemTable*>& mems, LogsWithPrepTracker* prep_tracker,
VersionSet* vset, InstrumentedMutex* mu, uint64_t file_number,
autovector<MemTable*>* to_delete, FSDirectory* db_directory,
LogBuffer* log_buffer,
std::list<std::unique_ptr<FlushJobInfo>>* committed_flush_jobs_info,
IOStatus* io_s) {
Allow GetThreadList() to report operation stage. Summary: Allow GetThreadList() to report operation stage. Test Plan: ./thread_list_test ./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \ --max_background_compactions=10 --max_background_flushes=3 \ --thread_status_per_interval=1000 --key_size=16 --value_size=1000 \ --num_column_families=10 export ROCKSDB_TESTS=ThreadStatus ./db_test Sample output ThreadID ThreadType cfName Operation OP_StartTime ElapsedTime Stage State 140116265861184 Low Pri 140116270055488 Low Pri 140116274249792 High Pri column_family_name_000005 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116400078912 Low Pri column_family_name_000004 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116358135872 Low Pri column_family_name_000006 Compaction 2015/03/10-14:58:10 1 us CompactionJob::FinishCompactionOutputFile 140116341358656 Low Pri 140116295221312 High Pri default Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116324581440 Low Pri column_family_name_000009 Compaction 2015/03/10-14:58:11 0 us CompactionJob::ProcessKeyValueCompaction 140116278444096 Low Pri 140116299415616 Low Pri column_family_name_000008 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116291027008 High Pri column_family_name_000001 Flush 2015/03/10-14:58:11 0 us FlushJob::WriteLevel0Table 140116286832704 Low Pri column_family_name_000002 Compaction 2015/03/10-14:58:11 0 us CompactionJob::FinishCompactionOutputFile 140116282638400 Low Pri Reviewers: rven, igor, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D34683
2015-03-13 17:45:40 +00:00
AutoThreadOperationStageUpdater stage_updater(
ThreadStatus::STAGE_MEMTABLE_INSTALL_FLUSH_RESULTS);
mu->AssertHeld();
// Flush was successful
// Record the status on the memtable object. Either this call or a call by a
// concurrent flush thread will read the status and write it to manifest.
for (size_t i = 0; i < mems.size(); ++i) {
// All the edits are associated with the first memtable of this batch.
assert(i == 0 || mems[i]->GetEdits()->NumEntries() == 0);
mems[i]->flush_completed_ = true;
mems[i]->file_number_ = file_number;
}
2015-04-25 09:14:27 +00:00
// if some other thread is already committing, then return
Status s;
if (commit_in_progress_) {
TEST_SYNC_POINT("MemTableList::TryInstallMemtableFlushResults:InProgress");
return s;
}
// Only a single thread can be executing this piece of code
commit_in_progress_ = true;
// Retry until all completed flushes are committed. New flushes can finish
// while the current thread is writing manifest where mutex is released.
while (s.ok()) {
auto& memlist = current_->memlist_;
// The back is the oldest; if flush_completed_ is not set to it, it means
// that we were assigned a more recent memtable. The memtables' flushes must
// be recorded in manifest in order. A concurrent flush thread, who is
// assigned to flush the oldest memtable, will later wake up and does all
// the pending writes to manifest, in order.
if (memlist.empty() || !memlist.back()->flush_completed_) {
break;
}
// scan all memtables from the earliest, and commit those
// (in that order) that have finished flushing. Memtables
// are always committed in the order that they were created.
uint64_t batch_file_number = 0;
size_t batch_count = 0;
autovector<VersionEdit*> edit_list;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
autovector<MemTable*> memtables_to_flush;
// enumerate from the last (earliest) element to see how many batch finished
for (auto it = memlist.rbegin(); it != memlist.rend(); ++it) {
MemTable* m = *it;
if (!m->flush_completed_) {
break;
}
if (it == memlist.rbegin() || batch_file_number != m->file_number_) {
batch_file_number = m->file_number_;
if (m->edit_.GetBlobFileAdditions().empty()) {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64 " started",
cfd->GetName().c_str(), m->file_number_);
} else {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
" (+%zu blob files) started",
cfd->GetName().c_str(), m->file_number_,
m->edit_.GetBlobFileAdditions().size());
}
edit_list.push_back(&m->edit_);
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
memtables_to_flush.push_back(m);
#ifndef ROCKSDB_LITE
std::unique_ptr<FlushJobInfo> info = m->ReleaseFlushJobInfo();
if (info != nullptr) {
committed_flush_jobs_info->push_back(std::move(info));
}
#else
(void)committed_flush_jobs_info;
#endif // !ROCKSDB_LITE
}
batch_count++;
group multiple batch of flush into one manifest file (one call to LogAndApply) Summary: Currently, if several flush outputs are committed together, we issue each manifest write per batch (1 batch = 1 flush = 1 sst file = 1+ continuous memtables). Each manifest write requires one fsync and one fsync to parent directory. In some cases, it becomes the bottleneck of write. We should batch them and write in one manifest write when possible. Test Plan: ` ./db_bench -benchmarks="fillseq" -max_write_buffer_number=16 -max_background_flushes=16 -disable_auto_compactions=true -min_write_buffer_number_to_merge=1 -write_buffer_size=65536 -level0_stop_writes_trigger=10000 -level0_slowdown_writes_trigger=10000` **Before** ``` Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 4.9 Date: Fri Jul 1 15:38:17 2016 CPU: 32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz CPUCache: 20480 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) Write rate: 0 bytes/second Compression: Snappy Memtablerep: skip_list Perf Level: 1 WARNING: Assertions are enabled; benchmarks unnecessarily slow ------------------------------------------------ Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags DB path: [/tmp/rocksdbtest-112628/dbbench] fillseq : 166.277 micros/op 6014 ops/sec; 0.7 MB/s ``` **After** ``` Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 4.9 Date: Fri Jul 1 15:35:05 2016 CPU: 32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz CPUCache: 20480 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) Write rate: 0 bytes/second Compression: Snappy Memtablerep: skip_list Perf Level: 1 WARNING: Assertions are enabled; benchmarks unnecessarily slow ------------------------------------------------ Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags DB path: [/tmp/rocksdbtest-112628/dbbench] fillseq : 52.328 micros/op 19110 ops/sec; 2.1 MB/s ``` Reviewers: andrewkr, IslamAbdelRahman, yhchiang, sdong Reviewed By: sdong Subscribers: igor, andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60075
2016-07-06 01:09:59 +00:00
}
// TODO(myabandeh): Not sure how batch_count could be 0 here.
if (batch_count > 0) {
uint64_t min_wal_number_to_keep = 0;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
if (vset->db_options()->allow_2pc) {
assert(edit_list.size() > 0);
min_wal_number_to_keep = PrecomputeMinLogNumberToKeep2PC(
vset, *cfd, edit_list, memtables_to_flush, prep_tracker);
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
// We piggyback the information of earliest log file to keep in the
// manifest entry for the last file flushed.
edit_list.back()->SetMinLogNumberToKeep(min_wal_number_to_keep);
} else {
min_wal_number_to_keep =
PrecomputeMinLogNumberToKeepNon2PC(vset, *cfd, edit_list);
}
std::unique_ptr<VersionEdit> wal_deletion;
if (vset->db_options()->track_and_verify_wals_in_manifest) {
const auto& wals = vset->GetWalSet().GetWals();
if (!wals.empty() && min_wal_number_to_keep > wals.begin()->first) {
wal_deletion.reset(new VersionEdit);
wal_deletion->DeleteWalsBefore(min_wal_number_to_keep);
edit_list.push_back(wal_deletion.get());
}
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
}
Perform post-flush updates of memtable list in a callback (#6069) Summary: Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes. ``` time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr 0 | WriteManifest:0 1 | issue compact 2 | wait 3 | Merge(counter) 4 | issue flush 5 | wait 6 | WriteManifest:1 7 | wake up 8 | write manifest 9 | wake up 10 | Get(counter) 11 | remove imm V ``` The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables. To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex. Test plan (devserver) ``` $make merge_test $./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush $make check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069 Reviewed By: cheng-chang Differential Revision: D18790894 Pulled By: riversand963 fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
2020-10-27 01:20:43 +00:00
const auto manifest_write_cb = [this, cfd, batch_count, log_buffer,
to_delete, mu](const Status& status) {
RemoveMemTablesOrRestoreFlags(status, cfd, batch_count, log_buffer,
to_delete, mu);
};
// this can release and reacquire the mutex.
s = vset->LogAndApply(cfd, mutable_cf_options, edit_list, mu,
Perform post-flush updates of memtable list in a callback (#6069) Summary: Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes. ``` time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr 0 | WriteManifest:0 1 | issue compact 2 | wait 3 | Merge(counter) 4 | issue flush 5 | wait 6 | WriteManifest:1 7 | wake up 8 | write manifest 9 | wake up 10 | Get(counter) 11 | remove imm V ``` The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables. To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex. Test plan (devserver) ``` $make merge_test $./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush $make check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069 Reviewed By: cheng-chang Differential Revision: D18790894 Pulled By: riversand963 fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
2020-10-27 01:20:43 +00:00
db_directory, /*new_descriptor_log=*/false,
/*column_family_options=*/nullptr,
manifest_write_cb);
*io_s = vset->io_status();
group multiple batch of flush into one manifest file (one call to LogAndApply) Summary: Currently, if several flush outputs are committed together, we issue each manifest write per batch (1 batch = 1 flush = 1 sst file = 1+ continuous memtables). Each manifest write requires one fsync and one fsync to parent directory. In some cases, it becomes the bottleneck of write. We should batch them and write in one manifest write when possible. Test Plan: ` ./db_bench -benchmarks="fillseq" -max_write_buffer_number=16 -max_background_flushes=16 -disable_auto_compactions=true -min_write_buffer_number_to_merge=1 -write_buffer_size=65536 -level0_stop_writes_trigger=10000 -level0_slowdown_writes_trigger=10000` **Before** ``` Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 4.9 Date: Fri Jul 1 15:38:17 2016 CPU: 32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz CPUCache: 20480 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) Write rate: 0 bytes/second Compression: Snappy Memtablerep: skip_list Perf Level: 1 WARNING: Assertions are enabled; benchmarks unnecessarily slow ------------------------------------------------ Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags DB path: [/tmp/rocksdbtest-112628/dbbench] fillseq : 166.277 micros/op 6014 ops/sec; 0.7 MB/s ``` **After** ``` Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 4.9 Date: Fri Jul 1 15:35:05 2016 CPU: 32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz CPUCache: 20480 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) Write rate: 0 bytes/second Compression: Snappy Memtablerep: skip_list Perf Level: 1 WARNING: Assertions are enabled; benchmarks unnecessarily slow ------------------------------------------------ Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags DB path: [/tmp/rocksdbtest-112628/dbbench] fillseq : 52.328 micros/op 19110 ops/sec; 2.1 MB/s ``` Reviewers: andrewkr, IslamAbdelRahman, yhchiang, sdong Reviewed By: sdong Subscribers: igor, andrewkr, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D60075
2016-07-06 01:09:59 +00:00
}
}
commit_in_progress_ = false;
return s;
}
// New memtables are inserted at the front of the list.
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
void MemTableList::Add(MemTable* m, autovector<MemTable*>* to_delete) {
assert(static_cast<int>(current_->memlist_.size()) >= num_flush_not_started_);
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
InstallNewVersion();
2014-01-27 01:40:43 +00:00
// this method is used to move mutable memtable into an immutable list.
// since mutable memtable is already refcounted by the DBImpl,
// and when moving to the imutable list we don't unref it,
// we don't have to ref the memtable here. we just take over the
// reference from the DBImpl.
Support saving history in memtable_list Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 23:34:24 +00:00
current_->Add(m, to_delete);
m->MarkImmutable();
num_flush_not_started_++;
if (num_flush_not_started_ == 1) {
imm_flush_needed.store(true, std::memory_order_release);
}
UpdateCachedValuesFromMemTableListVersion();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
ResetTrimHistoryNeeded();
}
bool MemTableList::TrimHistory(autovector<MemTable*>* to_delete, size_t usage) {
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
InstallNewVersion();
bool ret = current_->TrimHistory(to_delete, usage);
UpdateCachedValuesFromMemTableListVersion();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
ResetTrimHistoryNeeded();
return ret;
}
// Returns an estimate of the number of bytes of data in use.
size_t MemTableList::ApproximateUnflushedMemTablesMemoryUsage() {
size_t total_size = 0;
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
for (auto& memtable : current_->memlist_) {
total_size += memtable->ApproximateMemoryUsage();
}
return total_size;
}
size_t MemTableList::ApproximateMemoryUsage() { return current_memory_usage_; }
size_t MemTableList::ApproximateMemoryUsageExcludingLast() const {
const size_t usage =
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
current_memory_usage_excluding_last_.load(std::memory_order_relaxed);
return usage;
}
bool MemTableList::HasHistory() const {
const bool has_history = current_has_history_.load(std::memory_order_relaxed);
return has_history;
}
void MemTableList::UpdateCachedValuesFromMemTableListVersion() {
const size_t total_memtable_size =
current_->ApproximateMemoryUsageExcludingLast();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
current_memory_usage_excluding_last_.store(total_memtable_size,
std::memory_order_relaxed);
const bool has_history = current_->HasHistory();
current_has_history_.store(has_history, std::memory_order_relaxed);
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
}
uint64_t MemTableList::ApproximateOldestKeyTime() const {
if (!current_->memlist_.empty()) {
return current_->memlist_.back()->ApproximateOldestKeyTime();
}
return std::numeric_limits<uint64_t>::max();
}
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
void MemTableList::InstallNewVersion() {
if (current_->refs_ == 1) {
// we're the only one using the version, just keep using it
} else {
// somebody else holds the current version, we need to create new one
MemTableListVersion* version = current_;
current_ = new MemTableListVersion(&current_memory_usage_, *version);
2014-01-25 21:50:30 +00:00
current_->Ref();
MemTableListVersion Summary: MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful. This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team. I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet()) Test Plan: `make check` works. I will also do `make valgrind_check` before commit Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D15255
2014-01-24 22:52:08 +00:00
version->Unref();
}
}
Perform post-flush updates of memtable list in a callback (#6069) Summary: Currently, the following interleaving of events can lead to SuperVersion containing both immutable memtables as well as the resulting L0. This can cause Get to return incorrect result if there are merge operands. This may also affect other operations such as single deletes. ``` time main_thr bg_flush_thr bg_compact_thr compact_thr set_opts_thr 0 | WriteManifest:0 1 | issue compact 2 | wait 3 | Merge(counter) 4 | issue flush 5 | wait 6 | WriteManifest:1 7 | wake up 8 | write manifest 9 | wake up 10 | Get(counter) 11 | remove imm V ``` The reason behind is that: one bg flush thread's installing new `Version` can be batched and performed by another thread that is the "leader" MANIFEST writer. This bg thread removes the memtables from current super version only after `LogAndApply` returns. After the leader MANIFEST writer signals (releasing mutex) this bg flush thread, it is possible that another thread sees this cf with both memtables (whose data have been flushed to the newest L0) and the L0 before this bg flush thread removes the memtables. To address this issue, each bg flush thread can pass a callback function to `LogAndApply`. The callback is responsible for removing the memtables. Therefore, the leader MANIFEST writer can call this callback and remove the memtables before releasing the mutex. Test plan (devserver) ``` $make merge_test $./merge_test --gtest_filter=MergeTest.MergeWithCompactionAndFlush $make check ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/6069 Reviewed By: cheng-chang Differential Revision: D18790894 Pulled By: riversand963 fbshipit-source-id: e41bd600c0448b4f4b2deb3f7677f95e3076b4ed
2020-10-27 01:20:43 +00:00
void MemTableList::RemoveMemTablesOrRestoreFlags(
const Status& s, ColumnFamilyData* cfd, size_t batch_count,
LogBuffer* log_buffer, autovector<MemTable*>* to_delete,
InstrumentedMutex* mu) {
assert(mu);
mu->AssertHeld();
assert(to_delete);
// we will be changing the version in the next code path,
// so we better create a new one, since versions are immutable
InstallNewVersion();
// All the later memtables that have the same filenum
// are part of the same batch. They can be committed now.
uint64_t mem_id = 1; // how many memtables have been flushed.
// commit new state only if the column family is NOT dropped.
// The reason is as follows (refer to
// ColumnFamilyTest.FlushAndDropRaceCondition).
// If the column family is dropped, then according to LogAndApply, its
// corresponding flush operation is NOT written to the MANIFEST. This
// means the DB is not aware of the L0 files generated from the flush.
// By committing the new state, we remove the memtable from the memtable
// list. Creating an iterator on this column family will not be able to
// read full data since the memtable is removed, and the DB is not aware
// of the L0 files, causing MergingIterator unable to build child
// iterators. RocksDB contract requires that the iterator can be created
// on a dropped column family, and we must be able to
// read full data as long as column family handle is not deleted, even if
// the column family is dropped.
if (s.ok() && !cfd->IsDropped()) { // commit new state
while (batch_count-- > 0) {
MemTable* m = current_->memlist_.back();
if (m->edit_.GetBlobFileAdditions().empty()) {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
": memtable #%" PRIu64 " done",
cfd->GetName().c_str(), m->file_number_, mem_id);
} else {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
" (+%zu blob files)"
": memtable #%" PRIu64 " done",
cfd->GetName().c_str(), m->file_number_,
m->edit_.GetBlobFileAdditions().size(), mem_id);
}
assert(m->file_number_ > 0);
current_->Remove(m, to_delete);
UpdateCachedValuesFromMemTableListVersion();
ResetTrimHistoryNeeded();
++mem_id;
}
} else {
for (auto it = current_->memlist_.rbegin(); batch_count-- > 0; ++it) {
MemTable* m = *it;
// commit failed. setup state so that we can flush again.
if (m->edit_.GetBlobFileAdditions().empty()) {
ROCKS_LOG_BUFFER(log_buffer,
"Level-0 commit table #%" PRIu64 ": memtable #%" PRIu64
" failed",
m->file_number_, mem_id);
} else {
ROCKS_LOG_BUFFER(log_buffer,
"Level-0 commit table #%" PRIu64
" (+%zu blob files)"
": memtable #%" PRIu64 " failed",
m->file_number_,
m->edit_.GetBlobFileAdditions().size(), mem_id);
}
m->flush_completed_ = false;
m->flush_in_progress_ = false;
m->edit_.Clear();
num_flush_not_started_++;
m->file_number_ = 0;
imm_flush_needed.store(true, std::memory_order_release);
++mem_id;
}
}
}
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 22:35:11 +00:00
uint64_t MemTableList::PrecomputeMinLogContainingPrepSection(
const std::unordered_set<MemTable*>* memtables_to_flush) {
uint64_t min_log = 0;
for (auto& m : current_->memlist_) {
if (memtables_to_flush && memtables_to_flush->count(m)) {
continue;
}
auto log = m->GetMinLogContainingPrepSection();
if (log > 0 && (min_log == 0 || log < min_log)) {
min_log = log;
}
}
return min_log;
}
// Commit a successful atomic flush in the manifest file.
Status InstallMemtableAtomicFlushResults(
const autovector<MemTableList*>* imm_lists,
const autovector<ColumnFamilyData*>& cfds,
const autovector<const MutableCFOptions*>& mutable_cf_options_list,
const autovector<const autovector<MemTable*>*>& mems_list, VersionSet* vset,
LogsWithPrepTracker* prep_tracker, InstrumentedMutex* mu,
const autovector<FileMetaData*>& file_metas,
autovector<MemTable*>* to_delete, FSDirectory* db_directory,
LogBuffer* log_buffer) {
AutoThreadOperationStageUpdater stage_updater(
ThreadStatus::STAGE_MEMTABLE_INSTALL_FLUSH_RESULTS);
mu->AssertHeld();
size_t num = mems_list.size();
assert(cfds.size() == num);
if (imm_lists != nullptr) {
assert(imm_lists->size() == num);
}
if (num == 0) {
return Status::OK();
}
for (size_t k = 0; k != num; ++k) {
#ifndef NDEBUG
const auto* imm =
(imm_lists == nullptr) ? cfds[k]->imm() : imm_lists->at(k);
if (!mems_list[k]->empty()) {
assert((*mems_list[k])[0]->GetID() == imm->GetEarliestMemTableID());
}
#endif
assert(nullptr != file_metas[k]);
for (size_t i = 0; i != mems_list[k]->size(); ++i) {
assert(i == 0 || (*mems_list[k])[i]->GetEdits()->NumEntries() == 0);
(*mems_list[k])[i]->SetFlushCompleted(true);
(*mems_list[k])[i]->SetFileNumber(file_metas[k]->fd.GetNumber());
}
}
Status s;
autovector<autovector<VersionEdit*>> edit_lists;
uint32_t num_entries = 0;
for (const auto mems : mems_list) {
assert(mems != nullptr);
autovector<VersionEdit*> edits;
assert(!mems->empty());
edits.emplace_back((*mems)[0]->GetEdits());
++num_entries;
edit_lists.emplace_back(edits);
}
WalNumber min_wal_number_to_keep = 0;
if (vset->db_options()->allow_2pc) {
min_wal_number_to_keep = PrecomputeMinLogNumberToKeep2PC(
vset, cfds, edit_lists, mems_list, prep_tracker);
edit_lists.back().back()->SetMinLogNumberToKeep(min_wal_number_to_keep);
}
std::unique_ptr<VersionEdit> wal_deletion;
if (vset->db_options()->track_and_verify_wals_in_manifest &&
!vset->GetWalSet().GetWals().empty()) {
if (!vset->db_options()->allow_2pc) {
min_wal_number_to_keep =
PrecomputeMinLogNumberToKeepNon2PC(vset, cfds, edit_lists);
}
if (min_wal_number_to_keep > vset->GetWalSet().GetWals().begin()->first) {
wal_deletion.reset(new VersionEdit);
wal_deletion->DeleteWalsBefore(min_wal_number_to_keep);
edit_lists.back().push_back(wal_deletion.get());
++num_entries;
}
}
// Mark the version edits as an atomic group if the number of version edits
// exceeds 1.
if (cfds.size() > 1) {
for (size_t i = 0; i < edit_lists.size(); i++) {
assert((edit_lists[i].size() == 1) ||
((edit_lists[i].size() == 2) && (i == edit_lists.size() - 1)));
for (auto& e : edit_lists[i]) {
e->MarkAtomicGroup(--num_entries);
}
}
assert(0 == num_entries);
}
// this can release and reacquire the mutex.
s = vset->LogAndApply(cfds, mutable_cf_options_list, edit_lists, mu,
db_directory);
for (size_t k = 0; k != cfds.size(); ++k) {
auto* imm = (imm_lists == nullptr) ? cfds[k]->imm() : imm_lists->at(k);
imm->InstallNewVersion();
}
if (s.ok() || s.IsColumnFamilyDropped()) {
for (size_t i = 0; i != cfds.size(); ++i) {
if (cfds[i]->IsDropped()) {
continue;
}
auto* imm = (imm_lists == nullptr) ? cfds[i]->imm() : imm_lists->at(i);
for (auto m : *mems_list[i]) {
assert(m->GetFileNumber() > 0);
uint64_t mem_id = m->GetID();
const VersionEdit* const edit = m->GetEdits();
assert(edit);
if (edit->GetBlobFileAdditions().empty()) {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
": memtable #%" PRIu64 " done",
cfds[i]->GetName().c_str(), m->GetFileNumber(),
mem_id);
} else {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
" (+%zu blob files)"
": memtable #%" PRIu64 " done",
cfds[i]->GetName().c_str(), m->GetFileNumber(),
edit->GetBlobFileAdditions().size(), mem_id);
}
imm->current_->Remove(m, to_delete);
imm->UpdateCachedValuesFromMemTableListVersion();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
imm->ResetTrimHistoryNeeded();
}
}
} else {
for (size_t i = 0; i != cfds.size(); ++i) {
auto* imm = (imm_lists == nullptr) ? cfds[i]->imm() : imm_lists->at(i);
for (auto m : *mems_list[i]) {
uint64_t mem_id = m->GetID();
const VersionEdit* const edit = m->GetEdits();
assert(edit);
if (edit->GetBlobFileAdditions().empty()) {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
": memtable #%" PRIu64 " failed",
cfds[i]->GetName().c_str(), m->GetFileNumber(),
mem_id);
} else {
ROCKS_LOG_BUFFER(log_buffer,
"[%s] Level-0 commit table #%" PRIu64
" (+%zu blob files)"
": memtable #%" PRIu64 " failed",
cfds[i]->GetName().c_str(), m->GetFileNumber(),
edit->GetBlobFileAdditions().size(), mem_id);
}
m->SetFlushCompleted(false);
m->SetFlushInProgress(false);
m->GetEdits()->Clear();
m->SetFileNumber(0);
imm->num_flush_not_started_++;
}
imm->imm_flush_needed.store(true, std::memory_order_release);
}
}
return s;
}
void MemTableList::RemoveOldMemTables(uint64_t log_number,
autovector<MemTable*>* to_delete) {
assert(to_delete != nullptr);
InstallNewVersion();
auto& memlist = current_->memlist_;
autovector<MemTable*> old_memtables;
for (auto it = memlist.rbegin(); it != memlist.rend(); ++it) {
MemTable* mem = *it;
if (mem->GetNextLogNumber() > log_number) {
break;
}
old_memtables.push_back(mem);
}
for (auto it = old_memtables.begin(); it != old_memtables.end(); ++it) {
MemTable* mem = *it;
current_->Remove(mem, to_delete);
--num_flush_not_started_;
if (0 == num_flush_not_started_) {
imm_flush_needed.store(false, std::memory_order_release);
}
}
UpdateCachedValuesFromMemTableListVersion();
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 20:54:09 +00:00
ResetTrimHistoryNeeded();
}
} // namespace ROCKSDB_NAMESPACE